690225
7
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Instruction Manual & Operation Guide
Compressor Wine cooler
Please read carefully and follow all safety rules and operating instructions.
Model:
KRC
-
24SS
70L capacity
Contents
Please read all instructions carefully and follow all guidelines and rules for
optimum performance and proper appliance usage.
I. IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic
precautions
Read all instructions before using the Cooler.
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
Before you throw away your old Cooler: Take off the door. Leave the shelves in place so that
children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or
explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or
any other appliance. The fumes can create a fire hazard or explosion.
Do not repair or replace any part of the Cooler or attempt any servicing unless specifically
recommended in the user-maintenance instructions or in published user-repair instructions.
Replace the fuse with the same type.
-Save these instructions-
I. IMPORTANT SAFETY INSTRUCTIONS
2
II. PARTS DIAGRAM
3
III TEMPERATURE CONTROL
4
INSTALLING THE STAINLESS STEEL HANDLE
4
IV. ELECTRIC DIAGRAM
5
V. INSTRUCTION
6
VI. VENTILATION
6
VII. CLEANING
6
VIII. TROUBLE SHOOTING
7
WINE COOLER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual for your wine cooler. Always read and obey all
safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure
you and others. All safety messages will follow the Safety Alert Symbol and either the words”
DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this safety statement may result in
severe personal injury or death.
Warning means that failure to heed this safety statement may result in
extensive product damage, serious personal injury, or death.
Caution means that failure to heed this safety statement may result in
minor or moderate personal injury, property or equipment damage.
All safety messages will alert you to know what potential hazard is, tell you how to reduce the chance of injury, and let
you know what can happen if the instructions are not followed.
FLAMMABLE REFRIGERANT GAS
DANGER - Risk of fire or explosion. Flammable refrigerant used.
DO NOT use mechanical devices to defrost wine cooler. DO NOT puncture refrigerant tubing.
DANGER - Risk of fire or explosion. Flammable refrigerant used. To be repaired only by trained
service personnel. DO NOT puncture refrigerant tubing.
CAUTION - Risk of fire or explosion. Flammable refrigerant used. Consult repair manual / owner’s
guide before attempting to service this product. All safety precautions must be followed.
CAUTION - Risk of fire or explosion. Dispose of property in accordance with federal or local
regulations. Flammable refrigerant used.
CAUTION - Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling instructions
carefully. Flammable refrigerant used.
CAUTION - To prevent a child from being entrapped, keep out of reach of children and not in the
vicinity of the cooler.
II. PARTS DIAGRAM
Model No: KRC-24SS
» INSTALLING THE STAINLESS STEEL HANDLE
This wine cooler includes a stainless steel handle.To install the handle please follow the below
instructions:
Pull away the door gasket in the area where athe handle is to be installed on the left side as
shown below in illustration#1. The gasket is wasily displaced by hand, no tools are necessary.
Align the handle with the screws installed.Tighten the screws using a Phillips head screwdriver
until the handle sets both flush and secured tightly against the door frame.(DO NOT over
tighten as this will casue damage to the handle assembly).
Replace the door gasket to its original position.
1.Gasket 2.Phillips Head Screw Driver
3.Phillips Head Screw 4.Handle
1. Cabinet
2. Shelf
3. Retainer Bar
4. Foot
5. Upper Door Hinge with Cover
6. Control Panel(Exterior Door)
7. Glass Door
8. Stainless steel handle
9. Bottom Hinge
III. TEMPERATURE CONTROL
It is recommended that the wine cooler be installed in an area where the ambient temperature
is between 5-32ºC (41-90ºF).
Temperature Ranges for Your Wine Cooler
KRC-24SS 5 - 18ºC 41- 64ºF
CONTROL PANEL
You can select temperature display between Fahrenheit and Celsius setting by pushing this
button.
SETTING THE TEMPERATURE CONTROL
Your cooler is equipped with a control panel lock feature which will lock itself automatically
20 seconds after the last time a button is pressed.
Press the button to unlock the control panel. You will hear a “BEEPsound to alert you
that the control is now active.
You can manually adjust the temperature inside Cooler by pressing the buttons on the
display panel. The two buttons on the panel and adjust the temperature in
increments of 1ºC or 1ºF .
You can select the temperature to display in Fahrenheit or Celsius by long pressing the
button for 2 seconds.
You can turn the interior light on or off by short pressing the button.
The light will be turned off automatically if it remains ON for 10 minutes. You have to push the
“Light” button again to turn it back on.
Note:
If the unit is unplugged, the power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit if you attempt to restart before this time delay, the cooler will not start.
When you use the cooler for the first time or restart the cooler after having been shut off for a
long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the cooler is running for a few hours everything will be back to normal.
IV. ELECTRIC DIAGRAM
V. I NSTRUCTION
Note:
Position your Cooler so that the plug is accessible.
Keep your Cooler out of direct sunlight.
Do not place next to heat generating appliance.
Place the Cooler on a leveled surface that is strong enough to support the unit when it is
fully loaded. To level your Cooler, adjust the front feet located at the bottom of the unit.
Important:
Before connecting the unit to a power source, allow it stand upright for approximately 3
hours. This will reduce the possibility of any system malfunctions which may have occurred
from handing during transportation.
When positioning the Cooler, 6 inches of space at the back and 10 inches of space both
sides are suggested. Do not put any objects on top of the unit which may block the air
circulation.
Power Connection:
This Cooler should be properly grounded for your safety and in order to minimize the
possibility of electrical shock, the power cord of this unit is equipped with a 3-pin plug which
fits with 3-pin wall outlets.
Never cut or remove the ground wire from the supplied power cord.
The use of extension cords is not recommended.
This unit requires a standard 110V-60Hz electrical outlet with a 3-pin plug.
The cord should be secured behind the Cooler. Also, to prevent accidental injury, do not
expose or dangle the cord
VI.VENTILATION
Do not install the Cooler in a closed cabinet without proper ventilation.
Please leave at least 6 inches distance between the wall and the Cooler.
Do not remove the feet of the Cooler. Keep at least 50mm of ground clearance.
VII.CLEANING
UNPLUG the Appliance, and remove all items including shelves.
Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
Wash the shelves with a mild detergent solution.
Wash the outside cabinet with warm water and mild detergent. Rinse well and wipe dry with a
clean soft cloth.
IX. TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSES
Appliance does not operate
· The unit may be plugged in using a different voltage.
· The circuit breaker may be tripped or there is a blown
fuse.
The Cooler is not cold enough. · Check the temperature control settings, as the external
environment may be too hot.
· The door may be opened too frequently.
· The door is not closed completely.
· The door seal does not seal properly.
· The Cooler does not have sufficient clearance.
The Cooler vibrates while
operating.
· Check to assure that the appliance is level.
The Cooler seems to make too much
noise.
noise.
· The unit may not be leveled.
· Check the fan.
The Cooler will not close
properly.
· The unit may not be leveled.
· The rattling noise may come from the flow of the
refrigerantwhich is normal.
· As each cycle endsyou may hear gurgling sounds
caused by the flow of refrigerant in your unit
· Contraction and expansion of the inside walls may cause
popping and cracking noise.
· The unit is not level.
The LED display does not work. · There may be a problem with the main control board.
· There is a problem with the plug.
There is an LED display error. · There is a PCB problem.
The buttons do not function. · The temperature control panel may be damaged.
The door will not close properly. · The unit is not level.
· The door was reversed and not properly installed.
· The gasket is dirty or bent.
· The shelves, bins, or baskets are out of position.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kalamera KRC-24SS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kalamera KRC-24SS in de taal/talen: Engels als bijlage per email.

De handleiding is 1,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info