Main fuse
The main fuse protects all of the motorcycle's current consumers. The main fuse is located
in the starter relay under the right engine cowl. Remove the screws [1] and take off the
engine cowl [2].
Do not burn yourself on the hot exhaust pipe.
Lift the starter relay [3] out of the bracket, remove the cap [4] and check the main fuse [5].
A spare fuse [6] (30 ampere) is also plugged into the starter relay.
Replace a blown fuse only with an equivalent one. Visit an authorized KTM workshop if the
new fuse blows again.
Under no circumstances is a stronger fuse allowed to be set in or a fuse allowed to be “repaired”.
An inexpert treatment could damage the whole electrical installation!
MAINTENANCE WORK ON CHASSIS AND ENGINE »
64
2
1
1
1
3
4
6
5
ABS fuses – models with ABS (antilock brake system)
Two fuses for the ABS are located under the starter relay. Remove the caps and check the
fuses [7] and [8]. Replace blown fuses with the same type of fuse. Visit an authorized KTM
workshop if the new fuse blows again.
Under no circumstances is a stronger fuse allowed to be set in or a fuse allowed to be “repaired”.
An inexpert treatment could damage the whole electrical installation!
Spare 25 and 40-ampere fuses are located next to the fuse box in the storage compartment
in front of the seat.
7
8
