705162
5
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
4
SYSTEM SETUP
Overall system setup is crucial to avoid unnecessary room acoustic interaction. A
room’s natural acoustics may alter the sound level at various frequencies due to
abnormal dampening or reflections. Follow the checklist below for more details.
9
The system setup (studio monitors and work table) should be placed within the
front 1/3 of the room. Doing so will reduce reflection buildup of peak frequencies.
9
The left and right sides of the system setup should be centered an equal distance
from the left and right walls. This will produce even mid and low frequency
response and preserve stereo imaging.
9
Avoid a listening position (your ears) that is closer than 1 meter (3 feet) from any
wall. Also avoid large objects (such as lamps or decorations) near the studio
monitor and listening position.
9
Diffusers and absorption material in the corners and back of a room will help
remove room interaction by preventing reflections.
9
Carpeting will help prevent reflections from hard floor surfaces.
9
Studio monitor isolators (foam or rubber pads) will help remove low frequency
coupling between the stands and desk. Low frequency coupling will cause the
stand or desk to vibrate causing unwanted sounds.
9
A low noise floor (no outside interference from refrigerators or fans) is important
to prevent the masking of low frequency detail. Rattles due to studio monitor
playback should be removed as well.
W
ithin the system setup, the studio monitors and listening placement should be
positioned in a near field configuration as follows:
The left and right studio monitors should be
approximately 1 to 1.5 meters (3 to 5 feet) apart and
directed at a 60 degree angle towards the listening
location. Measure the distance between the left and
right studio monitors and note the listening position is
equal distance to both sides. This will form an
equilateral triangle. It is important that both left and
right studio monitors are level matched.
The ROKIT is a two-way studio monitor with a tweeter
(producing high frequencies) and a woofer (producing
mid and low frequencies) in one enclosure. In between
the tweeter and woofer is the acoustic axis point
where the full frequency range comes together. The
ideal location for the acoustic axis point is located at
ear level in the listening position. It is acceptable to
angle the studio monitors so the acoustic axis is in the
correct direction.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw KRK Systems Rokit Powered G3 Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van KRK Systems Rokit Powered G3 Series in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 1,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van KRK Systems Rokit Powered G3 Series

KRK Systems Rokit Powered G3 Series Gebruiksaanwijzing - Deutsch - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info