705171
14
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
13
If there is no power, check to see if...
Troubleshooting
If you can’t hear any sound...
If the monitor suddenly stops working...
If you’re having trouble, check out these tips...
The power cord is plugged into both the IEC socket on the rear panel of the monitor
and into the AC mains. The KRK logo on the front face plate will illuminate when the
monitor is powered on.
The AC mains voltage is matched to the operating voltage requirements
(see Changing Voltage in the Connecting Your System section on page 8). If the
AC mains voltage is higher than the selected voltage on the RoKit, it is possible that
the fuse needs to be replaced (see Changing Fuses in the Connecting Your System
section on page 8).
The KRK logo is illuminated on the front panel of the RoKit. If not, turn the power
switch off and check the AC mains fuse(s). NEVER USE A LARGER AMPERAGE
FUSE THAN IS SPECIFIED! Turn the power switch back on. The power light should
illuminate.
Note: If a fuse change is required, please check that the AC mains voltage is set correctly.
If the fuse(s) blow again when the monitor is turned on, please contact the dealer you
purchased it from, or KRK Customer Service (1-800-444-2766 or Service@Gibson.com).
Repeat the steps in the Troubleshooting section above before continuing to the next
steps.
Check to see if all other audio devices using the same AC outlet are still operating.
Make sure that:
The audio source cable is plugged into both the source output and the
monitor input.
• The System Gain pot is turned up fully clockwise (+6dB).
• The signal source (e.g. mixing console, work station, CD player, etc.) is
turned up to a level that can properly send a signal to the monitors.
Check to see if one of the monitors is working. Exchange the audio input cable from
the non-working monitor to the working unit. This will determine whether it's really the
monitor, a faulty cable, or some other glitch in the audio chain.
If the monitor is still not responding, it should be returned to the dealer that you
purchased it from, or to KRK, for servicing.
Turn the monitor send down or off.
Repeat the steps in the Troubleshooting sections above before continuing to the
next steps.
Carefully check to see if the amplifier’s back plate is hot! If the monitor has been
running at its highest power output for an extended period of time, it could be that the
unit has become overheated and the protection circuitry has shut the system
down momentarily. Your RoKit G2 monitor provides maximum circuitry protection
against AC power surges, amplifier overdrive, and overheating of the amplifiers. Turn the
monitor off then wait 30 minutes to allow the back plate to cool down. Turn the power
switch back on.
Increase the volume to check for normal operation.
If the monitor is still not responding, please contact the dealer you purchased it from or
KRK Customer Service (1-800-444-2766 or Service@Gibson.com).
rokit_manual REV E_rokit_manual 2/19/13 10:24 AM Page 14
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw KRK Systems Rokit Powered G2 Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van KRK Systems Rokit Powered G2 Series in de taal/talen: Engels als bijlage per email.

De handleiding is 2,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info