784261
51
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
51
EN
Using the appliance
Operation, setting and use
of the appliance
Manual setting and starting a cooking process
To set all parameters for a cooking process manually,
proceed as follows:
To select a cooking function / heating type,
press the key for microwave and oven functions
or the
key for steam cooking functions,
if necessary, several times or by subsequently touching
the and keys until the desired cooking function is
displayed as described in the corresponding table.
When the cooking function is selected, the respective
presettings of the parameters (microwave power, coo-
king temperature, grill level, steam value, if applicable)
and the cooking time are shown in the corresponding
display elds.
To change one of the preset values, activate the desired
parameter setting by touching the key several
times, if necessary, until the corresponding display
starts ashing.
As long as the activated setting display is ashing, use
the and keys to select the desired value from the
available options and then wait a few seconds
until the display stops ashing.
The current setting is then accepted.
Proceed in the same way for each further change of the
parameter settings.
To change the preset cooking duration, activate its
setting with the key (display starts ashing) and
use the and keys to set the desired time within the
adjustable range while the display is ashing.
Start the cooking process by touching the key.
The heating process starts and the time display shows
the countdown of the set cooking duration.
After the cooking time has elapsed, operation stops
automatically.
General notes on operation
The following instructions apply to both manually set
cooking processes and automatic programmes
(described later below):
The settings can each be changed as long as the corres-
ponding setting display is activated and ashing.
If no key is touched for a few seconds and the display
stops ashing, the current setting is automatically
applied.
If no key is touched for 5 minutes during setting or
interrupted operation (pause), the appliance switches
off automatically.
When the door is opened during operation, the cooking
process is automatically interrupted (pause).
Continue cooking after closing the door by touching
the key.
The oven lighting remains on during operation,
even if operation is interrupted (pause).
Change, Cancel, Pause and Exit
To discard the current settings and return to standby
mode, touch the key during the setting process.
To change the parameter settings during cooking,
touch the key during operation or, if applicable,
the key for changing the cooking duration (in auto-
matic programmes, this is only possible via the cooking
quantity setting) and then use the
and
keys as
described previously.
To interrupt a cooking process, touch the key during
operation.
The cooking process is paused.
To resume cooking after pausing, touch the key.
To cancel the cooking process / end it prematurely,
touch the key again after pausing.
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw KKT Kolbe EBMS4503S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van KKT Kolbe EBMS4503S in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1.56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info