813922
5
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
Installation and operation manual“
5
KFD stove must be installed on fireproof surface. If stove is going to be placed on wooden
floor or similar combustible surface, it must be preserved with high temperature (fire)
resistant material. Floor must be preserved under and around the stove.
Local regulations in exact country have the primacy of information presented in this
manual.
All local standards and regulations regarding to distance of the wall and exhaust pipe.
2.2 Chimney
After stove installation the stoves air outlet must be connected with exhaust gas pipe. This
connection should be made with attested pipe which can be used into solid fuel fireplaces. Its
diameter should match the air outlet diameter. If there is any need of reducing this diameter
use proper reduction connectors. Connection between reduction and the stove must be
sealed. The last phase of connecting the stove with the chimney is assembling the
connection pipe with the chimney.
The chimney must have at least as much air as you need for a normal combustion of the
appliance and the ventilation of the place. Respect the UNI 10683 norm relative to the
ventilation openings.
Basic requirements for chimney pipes, which are used for stove connection are:
- Chimney pipe must have round cross-section area,
- It should be heat isolated and waterproof, made of materials which are resistant to
high temperatures, exhaust emission products,
- It cannot have any reductions or deviations bigger than 30 º,
- For rectangular cross-section the bigger side ratio should not be higher than ½,
- The minimum height of chimney pipe should be 4 meters counting from the place
where fireplace is connected into it,
- It should have washout which allows to gather and remove all remaining of exhaust
process,
- Too big cross-section of the chimney pipe might cause problems with the way how the
device works,
- Too small cross-section area of the chimney pipe might greatly reduce the devices
draft and make it fume.
The under pressure into chimney should be around 10-12 Pa. It should be measured during
the work of the stove. When the under pressure is more than 17 Pa, installation of the
moderator should be considered to lower and stabilize it.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw KFD STO MAX 7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van KFD STO MAX 7 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info