22
Ⅲ NO
TRAY
Ⅲ Insert the tray again.
Ⅲ SOLVENT
IN TANK
Completely dissolve the content of one blister (3 tablets) in a jug
containing 0.6 litres of water, and fill the mixture in the water tank.
Reinstall the water tank.
Ⅲ OPEN TAP
SOLVENT
IN TANK
Ⅲ Put a sufficiently large container under the replaceable hot water
nozzle (16).
Ⅲ Open the steam / hot water draw-off valve (14) (Fig. 13).
Ⅲ DESCALING
Ⅲ CLOSE TAP
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ DESCALING
Ⅲ EMPTY
TRAY
Ⅲ Empty the tray (Fig. 17/18).
Ⅲ NO
TRAY
Ⅲ Insert the tray again.
Ⅲ FILL
WATER
Rinse the water tank thoroughly and fill it with cold, fresh
tap water. Install it again.
18. Descaling
Your IMPRESSA features an integrated descaling program. The
descaling operation will take some 40 min.
Please only use original JURA descaling tablets: their for-
mula is especially tailored to JURA coffee machines. Please
note that machine defects or residues in the water cannot be
excluded if you use inappropriate descaling agents.
If the IMPRESSA needs descaling, the corresponding mes-
sage is displayed.
You can still draw off coffee or hot water/steam and start the
descaling program later.
Before starting the descaling program, the machine must be
switched off. Once started, the descaling operation must not
be interrupted.
When using the descaling agent, immediately remove any
splashes or drips from sensitive surfaces, i.e. natural stone
and wooden surfaces, or take appropriate precautions.
In any case wait until the descaling agent is used up and the
tank is empty. Never refill descaling agent.
Ⅲ READY
DECALCIFY
Ⅲ Switch off the IMPRESSA using the ON/OFF key (3).
Ⅲ Remove hot water nozzle/Easy Cappuccino Frother.
Ⅲ Press the maintenance key (7) until the following message is
displayed:
Ⅲ EMPTY
TRAY
Ⅲ Empty the tray (Fig. 17/18).
