687142

Jura S80 Handleiding

15
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
S8/S80 Instructions for Use
2
Table of contents
Your S8/S80
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety ............................................................................................................................................... 6
1 Preparing and using for the first time 10
JURA on the Internet .................................................................................................................................... 10
Operation with touchscreen display ......................................................................................................... 10
Setting up the machine ..............................................................................................................................10
Filling the bean container ............................................................................................................................ 11
Determining the water hardness ...............................................................................................................11
First-time use .................................................................................................................................................11
Connecting milk ........................................................................................................................................... 13
Connect accessory (with wireless connection) .......................................................................................14
2 Preparation 15
Ways of preparing a beverage ...................................................................................................................15
Ristretto, espresso and coffee .................................................................................................................... 16
Two ristretti, two espressi and two coffees .............................................................................................17
Latte macchiato, cappuccino and other speciality coffees with milk ................................................. 17
Warm milk and milk foam ..........................................................................................................................18
Ground coffee ...............................................................................................................................................18
Adjusting the grinder ..................................................................................................................................19
Hot water ......................................................................................................................................................20
3 Daily operation 21
Filling the water tank ................................................................................................................................... 21
Switching on the machine ..........................................................................................................................21
Daily maintenance .......................................................................................................................................21
Regular maintenance ................................................................................................................................. 22
Switching off the machine ......................................................................................................................... 23
4 Permanent settings in programming mode 24
Product settings ..........................................................................................................................................25
Automatic switch-off ..................................................................................................................................26
Energy-saving mode ..................................................................................................................................27
Operating instructions ...............................................................................................................................28
Restore factory settings .............................................................................................................................28
Unit for amount of water ...........................................................................................................................29
Display brightness .......................................................................................................................................29
Setting the water hardness .......................................................................................................................30
Language ...................................................................................................................................................... 30
Querying information .................................................................................................................................31
3
Table of contents
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention
to potential serious injury, and the signal word CAUTION to potential minor
injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
T
Prompt to take action. This symbol means that you are being prompted to perform
some action.
E
Information and tips to make it even easier to use your S8/S80.
‘Coffee’ Display
Symbol description
5 Maintenance 32
Rinsing the machine ...................................................................................................................................32
Automatic milk system rinsing .................................................................................................................32
Cleaning the milk system .......................................................................................................................... 33
Dismantling and rinsing the professional fine foam frother ...............................................................34
Inserting the filter .......................................................................................................................................34
Changing the filter ...................................................................................................................................... 35
Cleaning the machine ................................................................................................................................36
Descaling the machine ..............................................................................................................................37
Cleaning the bean container ..................................................................................................................... 39
Descaling the water tank ...........................................................................................................................39
6 Display messages 40
7 Troubleshooting 41
8 Transport and environmentally friendly disposal 42
Transport/ Emptying the system .............................................................................................................42
Disposal .........................................................................................................................................................42
9 Technical data 43
10 Index 44
11 JURA contact details/ Legal information 48
4
Control elements
Control elements
9
8
3
5
10
7
6
4
2
1
1 Bean container with aroma preservation
cover
2 Water tank cover
3 Water tank
4 Plug-in mains cable
(back of the machine)
5 Coffee grounds container
6 Drip tray
7 Touchscreen display
8 Milk system with professional fine foam
frother
9 Height-adjustable coffee spout
10 Cup grille
5
Control elements
3
1
2
4
5
1 Filler funnel cover
2 Filler funnel for ground coffee
3 Cover cap for grinder adjustment switch
4 Grinder adjustment switch
5 On/Off button Q
Service socket for optional JURA Smart Connect
Accessories
Container for milk system
cleaning
Measuring spoon for ground
coffee
Hot-water nozzle
6
6
Important information
Important information
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for
any other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsi-
bility for the consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser-
vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
U
Never use a machine which is damaged or has
a defective mains cable.
U
In the event of signs of damage, for example if
there is a smell of burning, unplug the machine
immediately from the mains supply and con-
tact JURA service.
U
If the mains cable of this machine is damaged
it must be replaced with a special mains cable,
which is available directly from JURA or from
authorised JURA service centres.
U
Make sure that the S8/S80 and the mains cable
are not located close to hot surfaces.
U
Be careful to ensure that the mains cable is not
trapped and does not rub against sharp edges.
Proper use
For your safety
J
7
Important information
U
Never open and repair the machine yourself.
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
U
To completely and safely disconnect the
machine from the power supply, first switch
off the S8/S80 using the On/Off button. Only
then should you remove the mains plug from
the power socket.
There is a risk of scalds or burns on the spouts and
milk system:
U
Place the machine out of the reach of children.
U
Do not touch any hot parts. Use the handles
provided.
U
Be careful to ensure that the milk system is
correctly installed and clean. If incorrectly fit-
ted or if it becomes blocked, the milk system
or its parts might come off. There is a danger
of parts being swallowed.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
U
Never allow the mains cable to loosely hang
down. The mains cable could pose a tripping
hazard or become damaged.
U
Protect the S8/S80 from environmental influ-
ences such as rain, frost and direct sunlight.
U
Do not immerse the S8/S80, mains cable or
connections in water.
8
Important information
U
Do not put the S8/S80 or any individual parts
in the dishwasher.
U
Before cleaning, switch the S8/S80 off with the
On/Off button. Always wipe the S8/S80 with a
damp cloth rather than a wet one, and protect
it from prolonged exposure to water splash.
U
Only connect the machine to the mains volt-
age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your S8/S80. Further technical
data is provided in these instructions for use
(see Chapter 9 ‘Technical data’).
U
Connect the S8/S80 directly to a domestic
power socket. Using multi-socket adapters or
extension cords may cause overheating.
U
Please only use original JURA maintenance
products. Use of products that are not explic-
itly recommended by JURA could damage the
machine.
U
Do not use alkaline cleaning agents when
cleaning, use a soft cloth and a mild detergent.
U
Do not use any coffee beans treated with addi-
tives or caramelised coffee beans.
U
Only fill the water tank with fresh, cold water.
U
Switch the machine off with the On/Off button
if you are going to be absent for a longer
period of time and remove the mains plug
from the power socket.
U
Children may not clean or service the machine
unless supervised by a responsible person.
U
Do not allow children to play with the machine.
U
Keep children under the age of 8 away from
the machine, or supervise them constantly.
9
Important information
U
Children aged 8 and over may only operate
the machine without supervision if they have
been instructed in how to use it safely. Chil-
dren must be able to recognise and under-
stand the potential dangers arising from incor-
rect use.
People, including children, who
U
do not have the physical, sensory or mental
capabilities to use the machine safely or
U
are inexperienced or lack knowledge in how to
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor-
rectly.
Safety when handling the CLARIS Smart filter car-
tridge:
U
Filter cartridges should be kept out of the
reach of children.
U
Store filter cartridges in a dry place in the
sealed packaging.
U
Protect cartridges from heat and direct sun-
light.
U
Do not use damaged filter cartridges.
U
Do not open filter cartridges.
10
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet. You can download short operating instruc-
tions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your S8/S80
and on every aspect of coffee.
If you need assistance with using your machine, you can find this at
www.jura.com/service.
Your S8/S80 features a touchscreen display. There are two ways of
operating the touch display:
U
Touch
Touch the display with your finger, for example to start coffee
preparation or undertake various settings in programming
mode.
U
Slide
Move your finger across the display from left to right or from
top to bottom (or vice versa). For example, you can select one
of the speciality coffees in the product selector view or switch
between programme items in programming mode.
When setting up your S8/S80, please note the following:
U
Place the S8/S80 on a horizontal surface that is not sensitive
to water.
U
Choose a spot for your S8/S80 which protects the machine
against overheating. Ensure that the ventilation slots are not
covered.
JURA on the Internet
Operation with
touchscreen display
>>
>>
>>
>>
Setting up the machine
11
1 Preparing and using for the first time
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean con-
tainer.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the
aroma preservation cover.
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur® test strips supplied with the
machine.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
Filling the bean container
CAUTION
Determining the water
hardness
First-time use
J
WARNING
CAUTION
12
1 Preparing and using for the first time
Precondition:The bean container has been filled.
TConnect the mains cable to the machine.
TInsert the mains plug into a power socket.
TPress the On/Off button Q to switch the S8/S80 on.
‘Sprachauswahl’ / ‘Deutsch’
E To display more languages, move your finger either down-
wards or upwards in the selection list until the desired
language comes into focus (e.g. ‘English’).
T Touch ‘Save’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Water hardness’
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
TMove your finger across the display to change the water
hardness setting, e.g. to ‘25°dH’.
T Touch ‘Save’.
‘Saved’ appears briefly on the display.
‘Insert filter’
TPlace one receptacle under the coffee spout and another
under the fine foam frother.
TRemove the water tank and rinse it with cold water.
TFit the filter cartridge extension supplied on top of the
CLARIS filter cartridge Smart.
TInsert the filter cartridge with its extension into the water
tank.
TTurn the filter cartridge clockwise until it audibly clicks into
place.
13
1 Preparing and using for the first time
TFill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Filter operation’ / ‘Saved’
‘Filter is being rinsed’, the filter is rinsed. Water flows out of
the fine foam frother.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
‘System is filling’
‘Empty drip tray’
TEmpty the drip tray and put it back into the machine.
TPlace a receptacle under the coffee spout.
‘Machine is heating’
‘Machine is rinsing’, the system is rinsed. The rinse stops
automatically. The start screen is displayed. Your S8/S80 is
ready for use.
E If the filter is active, this is indicated by a blue filter symbol at
the top of the display.
Your S8/S80 creates fine, creamy, feather-light milk foam with a per-
fect consistency. The most important requirement for frothing milk
is a milk temperature of 4–8°C. We would therefore recommend
using a milk cooler or a milk container.
TRemove the protective cover from the milk system.
TConnect the milk pipe to the milk system.
TConnect the other end of the milk pipe to a milk container
or a milk cooler.
Connecting milk
14
1 Preparing and using for the first time
You have the option of connecting your S8/S80 wirelessly to a com-
patible accessory (e.g. the Cool Control Wireless milk cooler). To do
this, the receiver of the Cool Control or the JURA Smart Connect
must be plugged into the service socket.
Precondition:The start screen is displayed.
T Touch ‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
TMove your finger across the display until ‘Connect acces-
sory’ is displayed in the centre.
T Touch ‘Connect accessory’.
‘Connect accessory’
TNow follow the instructions on the display to connect the
accessory to the S8/S80.
Connect accessory (with
wireless connection)
15
2 Preparation
2 Preparation
Basic information about preparing drinks:
U
During the grinding operation you can change the coffee
strength of single products. To do this, move your finger
across the display.
U
During preparation you can change the preset amounts (e.g.
amount of water or milk foam). To do this, move your finger
across the display.
U
You can stop preparation at any time. To do this, touch
‘Cancel’.
Coffee tastes best served hot. A cold porcelain cup cools the bever-
age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).
The S8/S80 offers various ways of preparing a speciality coffee, milk
or hot water.
Preparation using the start screen: Simply touch the desired prod-
uct. The following products are displayed as standard on the start
screen:
‘Espresso’ ‘Coffee’ ‘2x Coffee’ ‘Hot water’
‘Cappuccino’ ‘Latte macchiato’ ‘Flat White’ ‘Milk foam’
Preparation using the product selector view: Only some of the
products you can prepare are shown on the start screen. As soon as
you touch the product selector symbol in the top right, more prod-
ucts are displayed in a product selector view.
Ways of preparing a
beverage
16
2 Preparation
Move your finger across the display to bring the desired product into
focus. Touch the product to start preparation. The following addi-
tional products are shown in the product selector view:
U
‘Milk’
U
‘Caffè latte’
U
‘Hot water for green tea’
U
‘2x Ristretto’
U
‘2x Espresso’
U
‘Ristretto’
U
‘Macchiato’
E The product selector view disappears automatically after
10seconds if no preparation is started.
E The last product selected always appears first in the product
selector view.
E You can move any of the standard products programmed in
your S8/S80 to your preferred position on the start screen and
make it one of your favourites. You can duplicate and person-
alise your favourite speciality coffees by giving them a new
product name and individual settings (e.g. amount and coffee
strength) (see Chapter 4 ‘Permanent settings in programming
mode – Adjusting the product settings’). Please note that the
descriptions provided in the following sections always refer to
the default settings.
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.
TPlace a cup under the coffee spout.
T Touch ‘Coffee’.
Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically. The start screen is dis-
played.
Ristretto, espresso and
coffee
17
2 Preparation
Example:Proceed as follows to prepare two ristretti (using product
selector view).
Precondition:The start screen is displayed.
TPlace two cups under the coffee spout.
TTouch the product selector symbol (top right) to go to the
product selector view.
TMove your finger across the display until ‘2 x Ristretto’ is
displayed in the centre.
T Touch ‘2x Ristretto’ to start preparation.
Preparation starts. The preset amount of water for coffee
flows into the cups. Preparation stops automatically. Your
S8/S80 is once more ready for use.
Your S8/S80 prepares latte macchiato, cappuccino and other speci-
ality coffees with milk at the touch of a button. There is no need to
move the glass or cup.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:The start screen is displayed. Milk is connected to the
fine foam frother.
TPlace a glass under the fine foam frother.
TSet the selector switch for the professional fine foam frother
to the Milk Foam position (see image).
T Touch ‘Latte macchiato’.
‘Latte macchiato’ appears and the preset amount of milk
foam flows into the glass.
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form.
Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati-
cally. Your S8/S80 is once more ready for use.
Two ristretti, two
espressi and two coffees
Latte macchiato,
cappuccino and other
speciality coffees with
milk
18
2 Preparation
E 15 minutes after preparation, the fine foam frother is automat-
ically rinsed (see Chapter 5 ‘Maintenance – Automatic milk
system rinsing’). Therefore always place a receptacle under the
fine foam frother after preparing milk.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the milk system’).
Example:Proceed as follows to prepare hot milk.
Precondition:The start screen is displayed. Milk is connected to the
milk system.
TPlace a cup under the fine foam frother.
TSet the selector switch for the professional fine foam frother
to the Milk position (see image).
E If you wish to prepare milk foam, set the selector switch to the
Milk Foam position (selector switch in vertical position).
T Touch ‘Milk foam’.
The milk foam is prepared. The preset amount of milk flows
into the cup.
Preparation stops automatically. Your S8/S80 is once more
ready for use.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the milk system’).
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
Warm milk and milk
foam
Ground coffee
19
2 Preparation
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
E If you did not fill the machine with a sufficient amount of
ground coffee, ‘Not enough ground coffee’ is displayed and
the S8/S80 stops the operation.
E The desired speciality coffee must be prepared within
approximately one minute after filling with the ground coffee.
Otherwise the S8/S80 stops the operation and is once more
ready for use.
All speciality coffees with ground coffee are always prepared follow-
ing the same model.
Example:Proceed as follows to prepare one espresso using ground
coffee.
Precondition:The start screen is displayed.
TPlace an espresso cup under the coffee spout.
TOpen the cover of the filler funnel for ground coffee.
‘Please add ground coffee’
TPlace one level measuring spoon of ground coffee into the
filler funnel.
TClose the cover of the filler funnel.
T Touch ‘Espresso’.
Preparation starts. ‘Espresso’ appears and the preset amount
of water for espresso flows into the cup.
Preparation stops automatically. Your S8/S80 is once more
ready for use.
You can adjust the grinder to suit the degree of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind
during the preparation of an espresso.
Adjusting the grinder
CAUTION
20
2 Preparation
Precondition:The start screen is displayed.
TPlace a cup under the coffee spout.
TOpen the cover of the grinder adjustment switch.
T Touch ‘Espresso’ to start preparation.
TTurn the grinder adjustment switch to the desired position
while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
The S8/S80 allows you to prepare different variants of hot water:
‘Hot water’ and ‘Hot water for green tea’.
To obtain a perfect water flow, use the hot-water nozzle supplied.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Example:Proceed as follows to prepare hot water for green tea.
Precondition:The start screen is displayed.
TTouch the product selector symbol (top right) to go to the
product selector view.
TMove your finger across the display until ‘Hot water for
green tea’ is displayed in the centre.
T Touch ‘Hot water for green tea’.
‘Insert hot-water nozzle’
TRemove the professional fine foam frother from the milk
system.
TFit the hot-water nozzle on the milk system.
T Touch ‘Next’.
‘Hot water for green tea’, the preset amount of water flows
into the cup.
Preparation stops automatically. Your S8/S80 is once more
ready for use.
Hot water
J
CAUTION
21
3 Daily operation
3 Daily operation
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the
tank.
TClose the water tank cover.
TPlace a receptacle under the coffee spout.
TPress the On/Off button Q to switch the S8/S80 on.
‘Welcome to JURA’
‘Machine is heating’
‘Machine is rinsing’, the system is rinsed. The rinse stops
automatically. Your S8/S80 is ready for use.
To ensure that you get many years of reliable service out of your S8/
S80 and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
TPull out the drip tray.
TEmpty the coffee grounds container and the drip tray. Rinse
them both with warm water.
E Always empty the coffee grounds container when the machine
is switched on. This is the only way of resetting the coffee
grounds counter.
TRefit the coffee grounds container and the drip tray.
TRinse the water tank with clean water.
Filling the water tank
CAUTION
Switching on the
machine
Daily maintenance
22
3 Daily operation
TClean the milk system (see Chapter 5 ‘Maintenance – Clean-
ing the milk system’).
TRemove the milk pipe and rinse it thoroughly under running
water.
TDismantle and rinse the milk system (see Chapter 5 ‘Main-
tenance – Dismantling and rinsing the professional fine
foam frother’).
TWipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
E To clean the display, you can disable it under ‘Maintenance
status’ / ‘Lock display’.
You will find more information about caring for your S8/S80 in pro-
gramming mode under ‘Maintenance status’ / ‘Maintenance infor-
mation’.
Carry out the following maintenance actions regularly or as requi-
red:
U
In the interests of hygiene, we recommend changing the milk
pipe and interchangeable milk spout on a regular basis
(approximately every 3 months). Replacements are available
from specialised dealers.
U
Clean the inside of the water tank, e.g. with a brush. Further
information about the water tank is provided in these instruc-
tions for use (see Chapter 5 ‘Maintenance – Descaling the
water tank’).
U
Traces of milk and coffee may stick to the top and bottom of
the cup grille. If this happens, clean the cup grille.
Regular maintenance
23
3 Daily operation
When the S8/S80 is switched off, the system is automatically rinsed
if a speciality coffee has been prepared. If milk has been prepared,
you will also be prompted to clean the milk system.
TPlace one receptacle under the coffee spout and another
under the milk system.
TPress the On/Off button Q.
E If milk has been prepared, you will be prompted to clean the
milk system (‘Clean the milk system’). After 10 seconds the
switch-off process continues automatically.
If milk has been prepared but you have not started milk
system cleaning, the milk system is rinsed first (‘Milk system
is being rinsed’).
‘Machine is rinsing’, the system rinses itself. The operation
stops automatically. Your S8/S80 is switched off.
Switching off the
machine
24
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Touch ‘P’ to enter programming mode. Move your finger across the
display to navigate through the programme items and permanently
save the desired settings. The following settings can be made:
Programme
item
Sub-item Explanation
‘Machine
settings’
‘Switch off after’
T Set the time after which the S8/S80 should switch off
automatically.
‘Save energy’
T Activate energy-saving mode.
‘Operating instructions’
T Activate/deactivate the operating instructions on how
to use the professional fine foam frother and hot-water
nozzle.
‘Factory setting’
TReset the machine to its factory setting.
‘Units’
T Select the unit for the amount of water.
‘Display’
TChange the display brightness.
‘Water hardness’
T You can set the water hardness of the water used.
‘Choose language’
T Select your language.
‘Product counter’,
‘Maintenance counter’
T Keep track of all products prepared and view the
number of maintenance programmes performed.
‘Demo mode’ You cannot prepare any products in demo mode.
‘Connect accessory’,
‘Disconnect accessories’
(Only displayed if the
JURA Smart Connect is
being used.)
T Connect the S8/S80 wirelessly to a JURA accessory or
disconnect the connection again.
‘Version’ Software version
‘Maintenance
status’
‘Clean the milk system’,
‘Clean’,
‘Change filter’ (only if
filter is fitted),
‘Descale’,
‘Rinse’,
‘Lock display’,
‘Maintenance information’
T Here you can start the required maintenance
programme or find out what maintenance actions are
required.
‘Product
settings’
T Select your settings for speciality coffees and hot water.
25
4 Permanent settings in programming mode
Touch a product on the start screen for about 2 seconds to view the
list of setting options:
U
‘Product settings’: Specify individual settings such as coffee
strength, amount of water, etc.
U
‘Product name’: Change the name of the product.
U
‘Delete’: Remove a product from the start screen.
U
‘Replace product’: Replace the products on the start screen
with your favourites.
U
‘Copy product’: Duplicate any product, for example to create
a variant with a new product name and individual settings.
U
‘Double product’ (not for products with milk or hot water):
Create a double product of the desired speciality.
E You can only change the settings of products that are stored
on the start screen.
The following settings can be set permanently for all speciality
coffees, milk and hot water:
Product Coffee
strength
Amount More settings
Ristretto,
espresso
10 levels Coffee: 15ml–80ml Temperature (low, normal, high),
product name, delete/replace/copy/
double product
Coffee 10 levels Coffee: 25ml–240ml Temperature (low, normal, high),
product name, delete/replace/copy/
double product
Two ristretti,
two espressi,
two coffees
– Coffee: the amount set
for the single product is
doubled.
Temperature (as for single product),
product name, delete product
Cappuccino,
flat white,
caffè latte
10 levels Coffee: 25ml–240ml
Milk: 1sec.–120sec.
Temperature (low, normal, high),
product name, delete/replace/copy
product
Latte macchiato 10 levels Coffee: 25ml–240ml
Milk: 1sec.–120sec.
Interval: 0sec.–60sec.
Temperature (low, normal, high),
product name, delete/replace/copy
product
Espresso
macchiato
10 levels Coffee: 15ml–80ml
Milk: 1sec.–120sec.
Temperature (low, normal, high),
product name, delete/replace/copy
product
Product settings
Adjusting the product
settings
26
4 Permanent settings in programming mode
Product Coffee
strength
Amount More settings
Milk foam,
milk
– Milk: 1sec.–120sec. Product name, delete/replace/copy
product
Hot water,
hot water for
green tea
– Water: 25ml–450ml Temperature (low, normal, high),
product name, delete/replace/copy
product
Permanent settings in programming mode always follow the same
model.
Example:Proceed as follows to change the coffee strength for one
espresso.
Precondition:The start screen is displayed.
T Touch ‘Espresso’ for about 2 seconds until the list of possible
settings is displayed.
T Touch ‘Product settings’.
‘Espresso’
TMove your finger across the display until ‘Coffee strength’ is
displayed in the centre.
TNow move your finger to the left or right to change the set-
ting for the coffee strength.
T Touch ‘Save’.
‘Saved’ appears briefly on the display.
T Touch ‘Back’ the number of times needed to display the start
screen again.
By instructing your S8/S80 to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your S8/S80 switches off automatically after the preset time follow-
ing the last action on the machine.
You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.
Precondition:The start screen is displayed.
T Touch ‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
Automatic switch-off
27
4 Permanent settings in programming mode
T Touch ‘Switch off after’.
‘Switch off after’
TNow move your finger to the left or right to change the
switch-off time.
T Touch ‘Save’.
‘Saved’ appears briefly on the display.
‘Switch off after’
T Touch ‘Back’ the number of times needed to display the start
screen again.
In the programme item ‘Machine settings’ / ‘Save energy’ you can
set an energy-saving mode:
U
‘Save energy’ / ‘1’
U
Soon after the last preparation, the S8/S80 stops heating up.
The ‘ESM’ symbol (E.S.M.
©
, Energy Save Mode) is displayed.
U
Before you can prepare a speciality coffee, speciality coffee
with milk, or hot water, the machine must heat up.
U
‘Save energy’ / ‘0’
U
All speciality coffees, speciality coffees with milk and hot
water can be prepared without having to wait.
Example:Proceed as follows to switch energy-saving mode off.
Precondition:The start screen is displayed.
T Touch ‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
TMove your finger across the display until ‘Save energy’ is dis-
played in the centre.
T Touch ‘Save energy’.
‘Save energy’
TNow move your finger across the controller and set it to ‘0’.
T Touch ‘Save’.
‘Saved’ appears briefly on the display.
‘Save energy’
T Touch ‘Back’ the number of times needed to display the start
screen again.
Energy-saving mode
28
4 Permanent settings in programming mode
In the programme item ‘Machine settings’/ ‘Operating instructions’
you can define whether the operating instructions on how to use the
professional fine foam frother and hot-water nozzle should be dis-
played during preparation.
Example:How to stop the operating instructions from being dis-
played.
Precondition:The start screen is displayed.
T Touch ‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
TMove your finger across the display until ‘Operating instruc-
tions’ is displayed in the centre.
T Touch ‘Operating instructions’.
‘Operating instructions’
TNow move your finger across the controller and set it to ‘0’.
T Touch ‘Save’.
‘Saved’ appears briefly on the display.
‘Operating instructions’
T Touch ‘Back’ the number of times needed to display the start
screen again.
In the programme item ‘Machine settings’ / ‘Factory setting’ the
machine can be reset to its factory setting. Your S8/S80 then
switches off.
Precondition:The start screen is displayed.
T Touch ‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
TMove your finger across the display until ‘Factory setting’ is
displayed in the centre.
T Touch ‘Factory setting’.
‘Factory setting’ / ‘Reset the machine to the factory set-
tings?’
T Touch ‘Yes’.
‘Saved’ appears briefly on the display.
Your S8/S80 is switched off.
Operating instructions
Restore factory settings
29
4 Permanent settings in programming mode
In the programme item ‘Machine settings’/ ‘Units’ you can select
the unit used for the amount of water.
Example:Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’.
Precondition:The start screen is displayed.
T Touch ‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
TMove your finger across the display until ‘Units’ is displayed
in the centre.
T Touch ‘Units’.
‘Units’
TNow move your finger to the left or right to change the set-
ting to ‘oz’.
T Touch ‘Save’.
‘Saved’ appears briefly on the display.
‘Units’
T Touch ‘Back’ the number of times needed to display the start
screen again.
In the programme item ‘Machine settings’/ ‘Display’ you can set the
display brightness (as a percentage).
Precondition:The start screen is displayed.
T Touch ‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
TMove your finger across the display until ‘Display’ is dis-
played in the centre.
T Touch ‘Display’.
‘Display’
TNow move your finger to the left or right to change the set-
ting.
T Touch ‘Save’.
‘Saved’ appears briefly on the display.
‘Display’
Unit for amount of water
Display brightness
30
4 Permanent settings in programming mode
T Touch ‘Back’ the number of times needed to display the start
screen again.
The harder the water is, the more frequently the S8/S80 needs to be
descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness was set when the machine was first used. You
can change this setting at any time.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH.
Precondition:The start screen is displayed.
T Touch ‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
TMove your finger across the display until ‘Water hardness’ is
displayed in the centre.
T Touch ‘Water hardness’.
‘Water hardness’
TNow move your finger to the left or right to change the set-
ting.
T Touch ‘Save’.
‘Saved’ appears briefly on the display.
‘Water hardness’
T Touch ‘Back’ the number of times needed to display the start
screen again.
In this programme item you can set the language used by your S8/
S80.
Example:Proceed as follows to change the language from ‘English’
to ‘Deutsch’.
Precondition:The start screen is displayed.
T Touch ‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
Setting the water
hardness
Language
31
4 Permanent settings in programming mode
TMove your finger across the display until ‘Choose language’
is displayed in the centre.
T Touch ‘Choose language’.
‘Choose language’
TMove your finger across the display until the desired lan-
guage, e.g. ‘Deutsch’, is displayed in the centre.
T Touch ‘Save’.
‘Gespeichert’ appears briefly on the display.
‘Sprachauswahl’
T Touch ‘Zurück’ the number of times needed to display the
start screen again.
In the programme item ‘Machine settings’ you can view the follow-
ing information:
U
‘Product counter’: Number of prepared coffee speciality cof-
fees, speciality coffees with milk and hot water
U
‘Maintenance counter’: Number of maintenance programmes
performed (cleaning, descaling etc.)
U
‘Version’: Software version
Example:Proceed as follows to view the number of speciality cof-
fees prepared.
Precondition:The start screen is displayed.
T Touch ‘P’.
‘Machine settings’
T Touch ‘Machine settings’.
‘Switch off after’
TMove your finger across the display until ‘Product counter’
is displayed in the centre.
T Touch ‘Product counter’.
‘Product counter’
T Touch ‘Next’ to view the number of other products.
T Touch ‘Back’ the number of times needed to display the start
screen again.
Querying information
32
5 Maintenance
5 Maintenance
Your S8/S80 has the following integrated maintenance programmes:
U
Rinsing the machine (‘Rinse’)
U
Cleaning the milk system (‘Clean the milk system’)
U
Changing the filter (‘Change filter’) (only if filter is fitted)
U
Cleaning the machine (‘Clean’)
U
Descaling the machine (‘Descale’)
E Clean the machine, descale the machine or change the filter
when you are prompted to do so.
E Touch ‘P’ to view the list of maintenance programmes (‘Main-
tenance status’). When the bar is completely filled with red,
your S8/S80 will prompt you to perform the appropriate main-
tenance programme.
E In the interests of hygiene, you should clean the milk system
daily when you have been preparing milk.
You can initiate the rinse operation manually at any time.
Precondition:The start screen is displayed.
TPlace one receptacle under the coffee spout and another
under the fine foam frother.
T Touch ‘P’.
‘Machine settings’
TMove your finger across the display until ‘Maintenance sta-
tus’ is displayed in the centre.
T Touch ‘Maintenance status’.
‘Clean’
TMove your finger across the display until ‘Rinse’ is displayed
in the centre.
T Touch ‘Rinse’ to start the rinse operation.
‘Machine is rinsing’
‘Milk system is being rinsed’
The rinse stops automatically. The start screen is displayed.
15 minutes after milk preparation, the milk system is automatically
rinsed. Therefore always place a receptacle under the milk system
after preparing milk.
Rinsing the machine
Automatic milk system
rinsing
33
5 Maintenance
To ensure that the milk system always works properly, you must
clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers.
E To clean the milk system, use the container supplied.
Precondition:The start screen is displayed. ‘Clean the milk system’
is displayed.
T Touch ‘Clean the milk system’.
T Touch ‘Clean the milk system’ again.
T Touch ‘Start’.
T Touch ‘Start’ again.
‘Milk system cleaner’ / ‘Connect the milk tube’ / ‘Fresh water’
TRemove the milk pipe from the milk container or milk cooler.
TAdd milk system cleaner to the front part of the container
up to the bottom mark (indicated by 6).
TThen fill with water up to the upper mark.
TPlace the container under the fine foam frother.
TConnect the milk pipe to the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T Touch ‘Next’.
‘Milk system is being cleaned’
The operation is interrupted, ‘Fresh water’.
TRinse the container thoroughly and fill the front part with
fresh water up to the upper mark.
TPlace this under the fine foam frother and reconnect the
milk pipe to the container.
T Touch ‘Next’.
‘Milk system is being cleaned’
The operation stops automatically.
Cleaning the milk system
CAUTION
6
34
5 Maintenance
To make sure the professional fine foam frother works properly, and
in the interests of hygiene, it must be dismantled and rinsed daily if
you have been preparing milk.
TRemove the milk pipe and rinse it thoroughly under running
water.
TRemove the professional fine foam frother.
TDismantle the fine foam frother into its individual parts.
TRinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 250ml cold water and 1 capful of JURA milk
system cleaner. Then rinse the parts thoroughly.
TRe-assemble the professional fine foam frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure optimum operation of the professional fine
foam frother.
TRe-fit the fine foam frother on the milk system.
Your S8/S80 no longer has to be descaled if you are using the CLARIS
Smart filter cartridge.
Precondition:The start screen is displayed.
Dismantling and rinsing
the professional fine
foam frother
1
2
Inserting the filter
35
5 Maintenance
TRemove and empty the water tank.
TFit the filter cartridge extension supplied on top of a CLARIS
Smart filter cartridge.
TInsert the filter cartridge with its extension into the water
tank.
TTurn the filter cartridge clockwise until it audibly clicks into
place.
TFill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display.
‘Filter is being rinsed’, water flows directly into the drip tray.
Rinsing of the filter stops automatically.
‘Empty drip tray’
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
The start screen is displayed.
E If the filter is active, this is indicated by a blue filter symbol at
the top of the display.
E Once the filter cartridge stops working (depending on the
water hardness setting), the S8/S80 will prompt you to change
the filter.
E CLARIS Smart filter cartridges are available from specialised
dealers.
Precondition:The start screen is displayed. ‘Change the filter’ is dis-
played.
T Touch ‘Change the filter’.
T Touch ‘Change the filter’ again.
‘Change filter’
TRemove and empty the water tank.
TTurn the filter cartridge anticlockwise and remove it along
with the extension from the water tank.
TFit the filter cartridge extension on top of a new CLARIS
Smart filter cartridge.
Changing the filter
36
5 Maintenance
TInsert the filter cartridge with its extension into the water
tank.
TTurn the filter cartridge clockwise until it audibly clicks into
place.
TFill the water tank with fresh, cold water and reinsert the
tank.
‘Saved’ appears briefly on the display. The machine has
automatically detected that you have just changed the filter
cartridge.
‘Filter is being rinsed’, water flows directly into the drip tray.
Rinsing of the filter stops automatically.
‘Empty drip tray’
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
The start screen is displayed.
E If the filter is active, this is indicated by a blue filter symbol at
the top of the display.
After 180preparations or 80switch-on rinses, the S8/S80 will prompt
you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E The cleaning programme lasts approximately 20 minutes.
E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E JURA cleaning tablets are available from specialised dealers.
Precondition:The start screen is displayed. ‘Clean machine’ is dis-
played.
T Touch ‘Clean machine’.
‘Clean’
T Touch ‘Clean’.
T Touch ‘Start’.
T Touch ‘Start’ again.
‘Empty coffee grounds container’
Cleaning the machine
CAUTION
37
5 Maintenance
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
TPlace one receptacle under the coffee spout and another
under the fine foam frother.
T Touch ‘Next’.
‘Machine is being cleaned’ appears and water flows out of
the coffee spout and the fine foam frother.
The operation is interrupted, ‘Add cleaning tablet’.
TOpen the cover of the filler funnel for ground coffee.
TInsert a JURA cleaning tablet into the filler funnel.
TClose the cover of the filler funnel.
T Touch ‘Next’.
‘Machine is being cleaned’, water flows repeatedly out of the
coffee spout and the fine foam frother.
The operation stops automatically.
‘Empty coffee grounds container’
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
Cleaning is now complete. The start screen is displayed.
The S8/S80 builds up deposits of limescale over time and automat-
ically prompts you to descale it when necessary. The degree of cal-
cification depends on the hardness of your water.
E If you are using a CLARIS Smart filter cartridge, you will not be
prompted to descale.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
Descaling the machine
J
CAUTION
CAUTION
CAUTION
38
5 Maintenance
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approximately 45minutes.
E JURA descaling tablets are available from specialised dealers.
Precondition:The start screen is displayed. ‘Decalcify machine’ is
displayed.
T Touch ‘Decalcify machine’.
‘Descale’
T Touch ‘Descale’.
T Touch ‘Start’.
T Touch ‘Start’ again.
‘Empty drip tray’
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
‘Pour descaling agent into water tank’
TRemove and empty the water tank.
TCompletely dissolve 3JURA descaling tablets in a receptacle
holding 500ml of water. This may take several minutes.
TPour the solution into the empty water tank and insert it
into the machine.
TPlace one receptacle under the coffee spout and another
under the fine foam frother.
T Touch ‘Next’.
‘Machine is being descaled’ appears and water flows out of
the fine foam frother repeatedly.
The operation is interrupted, ‘Empty drip tray’.
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
‘Fill water tank’
TRemove the water tank and rinse it thoroughly.
TFill the water tank with fresh, cold water and reinsert the
tank.
CAUTION
39
5 Maintenance
TPlace one receptacle under the coffee spout and another
under the fine foam frother.
T Touch ‘Next’.
‘Machine is being descaled’, the descaling operation is con-
tinued.
The operation is interrupted, ‘Empty drip tray’.
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. The start screen is displayed.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
Precondition:‘Fill bean container’ is displayed.
TSwitch the machine off with the On/Off button Q.
TRemove the aroma preservation cover.
TClean the bean container with a soft, dry cloth.
TFill the bean container with coffee beans and close the
aroma preservation cover.
Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.
TRemove the water tank.
TIf you use a CLARIS Smart filter cartridge, remove this.
TCompletely fill the water tank and dissolve 3 JURA descaling
tablets in it.
TLeave the water tank with the descaling solution for several
hours (e.g. overnight).
TEmpty the water tank and rinse it thoroughly.
TIf you use a CLARIS Smart filter cartridge, insert this again.
TFill the water tank with fresh, cold water and reinsert the
tank.
Cleaning the bean
container
Descaling the water tank
40
6 Display messages
6 Display messages
Message Cause/Result Action
‘Fill water tank’ The water tank is empty. You
cannot prepare any products.
T Fill the water tank (see Chapter 3
‘Daily operation – Filling the water
tank’).
‘Empty coffee
grounds container’
The coffee grounds container is full.
You cannot prepare any products.
T Empty the coffee grounds
container and the drip tray (see
Chapter 3 ‘Daily operation –
Daily maintenance’).
‘Drip tray not
fitted’
The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any products.
T Fit the drip tray.
‘Fill bean contai-
ner’
The bean container is empty. You
cannot prepare any speciality
coffees, but you can prepare hot
water and milk.
T Fill the bean container (see
Chapter 1 ‘Preparing and using
for the first time – Filling the bean
container’).
‘Change the filter’ The filter cartridge no longer works.
T Replace the CLARIS Smart filter
cartridge (see Chapter 5 ‘Mainte-
nance – Changing the filter’).
‘Clean machine’ The S8/S80 is prompting you to
clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the
machine’).
‘Decalcify machine’ The S8/S80 is prompting you to
descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the
machine ’).
‘Machine too hot
for maintenance’
The system is too hot to start a
maintenance programme.
T Wait for several minutes until the
system has cooled or prepare a
speciality coffee or hot water.
41
7 Troubleshooting
7 Troubleshooting
Problem Cause/Result Action
Insufficient foam is
produced when the
milk is frothed or milk
sprays out of the fine
foam frother.
The fine foam frother is
dirty.
T Clean the fine foam frother (see Chapter 5
‘Maintenance – Cleaning the milk system’).
T Dismantle and rinse the fine foam frother
(see Chapter 5 ‘Maintenance –
Dismantling and rinsing the professional
fine foam frother’).
Coffee only comes out
in drips when it is
being prepared.
The coffee is ground too
finely and obstructs the
system.
T Set the grinder to a coarser setting (see
Chapter 2 ‘Preparation – Adjusting the
grinder’).
The water hardness may
not have been correctly
set.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine ’).
‘Fill water tank’ is
displayed although the
water tank is full.
The water tank float is
trapped.
T Descale the water tank (see Chapter 5
‘Maintenance – Descaling the water tank’).
Grinder is making a
very loud noise.
There are foreign objects
in the grinder.
T Contact customer support in your
country (see Chapter 11 ‘JURA contact
details/ Legal information’).
‘Error2’ or ‘Error5’ is
displayed.
If the machine has been
exposed to the cold for a
long period of time,
heating may be disabled
for safety reasons.
T Warm the machine at room temperature.
Other ‘Error’ messages
are displayed.
–
T Switch the S8/S80 off with the On/Off
button Q. Contact customer support in
your country (see Chapter 11 ‘JURA contact
details/ Legal information’).
E If you were unable to solve the problem, contact customer
support in your country (see Chapter 11 ‘JURA contact details/
Legal information’).
42
8 Transport and environmentally friendly disposal
8 Transport and environmentally friendly disposal
Keep the packaging for your S8/S80. It should be used to protect the
machine during transport.
In order to protect the S8/S80 from frost during transport, the sys-
tem must be emptied.
Precondition:The start screen is displayed.
TRemove the milk pipe from the fine foam frother.
TPlace a receptacle under the fine foam frother.
T Touch ‘Milk foam’.
TRemove and empty the water tank.
TChange the time to ‘60sec.’.
Steam will continue to be discharged from the fine foam
frother until the system is empty.
‘Fill water tank’
TPress the On/Off button Q.
Your S8/S80 is switched off.
Please dispose of old machines in an environmentally neutral way.
H
Old machines contain valuable, recyclable materials which should
be recycled. Please therefore dispose of old machines via suitable
collection systems.
Transport/ Emptying the
system
Disposal
43
9 Technical data
9 Technical data
Voltage 220–240V~, 50Hz
Power 1450W
Conformity mark
A
Pump pressure static, max. 15bar
Holding capacity of water tank
(without filter)
1.9l
Holding capacity of bean container 280g
Holding capacity of coffee grounds
container
max. 16 portions
Cable length approx. 1.1m
Weight approx. 10.0kg
Dimensions (W×H×D) 28.0 × 34.8 × 44.4cm
Information for testers (repeat test in accordance with DIN VDE
0701-0702): The central grounding point (CGP) is located on the
underside of the machine, right next to the mains cable's connec-
tion point.
44
10 Index
10 Index
A
Addresses 48
Adjusting the product settings 25
Aroma preservation cover
Bean container with aroma preservation
cover 4
Automatic switch-off 26
B
Bean container
Bean container with aroma preservation
cover 4
Cleaning 39
Filling 11
Bus bar
Technical data 43
Button
On/Off button 5
C
Caffè latte 17
Cappuccino 17
Cappuccino frother cleaning
Cleaning the milk system 33
Central grounding point 43
CLARIS Smart filter cartridge
Change 35
Insert 34
Cleaning
Bean container 39
Machine 36
Coffee 16
Two coffees 17
Coffee grounds container 4
Coffee spout
Height-adjustable coffee spout 4
Connect accessory 14
Consistency of grind
Adjusting the grinder 19
Grinder adjustment switch 5
Contact details 48
Cover
Filler funnel for ground coffee 5
Water tank 4
Cup grille 4
Customer support 48
D
Daily maintenance 21
Descaling
Machine 37
Water tank 39
Display
Touchscreen display 4, 10
Display brightness 29
Display messages 40
Disposal 42
Double product 17
Drip tray 4
E
Emptying the system 42
Energy-saving mode 27
Errors
Troubleshooting 41
Espresso 16
Two espressi 17
Espresso macchiato 17
F
Factory settings
Restore factory settings 28
Filler funnel
Filler funnel for ground coffee 5
Filling
Bean container 11
Water tank 21
Filter
Change 35
Insert 34
Fine foam frother
Professional fine foam frother 4
First-time use 11
Flat white 17
G
Green tea 20
Grinder adjustment switch 5
Ground coffee 18
Measuring spoon for ground coffee 5
Grounding point 43
45
10 Index
H
Height-adjustable coffee spout 4
Homepage 10
Hotline 48
Hot water 20
Hot-water nozzle 5
I
Instant coffee
Ground coffee 18
Internet 10
J
JURA
Contact details 48
Internet 10
L
Language 30
Latte macchiato 17
M
Machine
Cleaning 36
Daily maintenance 21
Descaling 37
Regular maintenance 22
Rinsing 32
Setting up 10
Switching off 23
Switching on 21
Mains cable 4
Maintenance 32
Daily maintenance 21
Regular maintenance 22
Measuring spoon for ground coffee 5
Messages, display 40
Milk
Connecting milk 13
Milk foam 18
Milk system
Cleaning 33
Professional fine foam frother 4
Milk system rinsing 32
Milk, warm 18
O
Operating instructions 28
P
Permanent settings in programming mode
24
Preparation 15, 17
At the touch of a button 15
Caffè latte 17
Cappuccino 17
Coffee 16
Espresso 16
Espresso macchiato 17
Flat white 17
Green tea 20
Ground coffee 18
Hot water 20
Latte macchiato 17
Milk 18
Milk foam 18
Ristretto 16
Two coffees 17
Two espressi 17
Two ristretti 17
Two speciality coffees 17
Using the product selector 15
Preparation options 15
Problems
Troubleshooting 41
Product selector view 15
Product settings 25
Adjusting 25
Professional fine foam frother 4
Dismantling and rinsing 34
Programming mode 24
Automatic switch-off 26
Display brightness 29
Energy-saving mode 27
Language 30
Operating instructions 28
Product settings 25
Querying information 31
Restore factory settings 28
Setting the water hardness 30
Unit for amount of water 29
Proper use 6
Q
Querying information 31
46
10 Index
R
Regular maintenance 22
Rinsing
Machine 32
Ristretto 16, 17
Two ristretti 17
Rotary Selection 15
S
Safety 6
Safety information 6
Settings
Permanent settings in programming
mode 24
Setting up
Setting up the machine 10
Short operating instructions 10
Smart Connect 14
Switching off 23
Switching on 21
Switch-off
Automatic switch-off 26
Symbol description 3
T
Technical data 43
Tel 48
Touchscreen display 4, 10
Transport 42
Troubleshooting 41
Two products 17
U
Unit for amount of water 29
Use, First-time 11
W
Warm milk 18
Water hardness
Determining the water hardness 11
Setting the water hardness 30
Water tank 4
Descaling 39
Filling 21
Website 10
Wireless connection 14
47
48
11 JURA contact details/ Legal information
11 JURA contact details/ Legal information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 38 98 233
@ You will find additional contact details for your country at
www.jura.com.
@ If you need assistance with using your machine, you can find
this at www.jura.com/service.
The machine complies with the following directives:
U
2014/35/EU– Low Voltage Directive
U
2014/30/EU– Electromagnetic Compatibility
U
2009/125/EC– Ecodesign Directive
U
2011/65/EU– RoHS Directive
We reserve the right to make technical changes. The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colours of the machine. Some details of
your S8/S80 may vary.
Your opinion is important to us! Use the contact details at
www.jura.com.
The instructions for use contain information which is protected by
copyright. It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG.
Directives
Technical changes
Feedback
Copyright
J73423/S8-S80/en/201807
… 15 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jura S80 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jura S80 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Jura S80

Jura S80 Gebruiksaanwijzing - Nederlands - 52 pagina's

Jura S80 Gebruiksaanwijzing - Deutsch - 52 pagina's

Jura S80 Gebruiksaanwijzing - Français - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info