13
Ⅲ Then press key briefly to store mode in memory
Ⅲ You can call up the next setting by pressing key .
You can programme your machine to “economy mode”. In
the setting ECONOMY MODE ON the steam heating-
system is switched off. The heating for the cup warming tray
is switched off too. If you want to draw off steam you need
to press the steam key , warning lamps flash and your
machine heats up.
After 10 minutes the steam heating-system switches off
automatically. The warning lamps go out. By pressing the
steam key anew, you return to stand-by-status for drawing
off steam.
ECONOMY MODE OFF means that the stand-by-status for
steam is set to 10 minutes and the heating for the cup warm-
ing tray is on. After 10 minutes the heating-system switches
down to a stand-by temperature. By pressing the steam key
anew, the machine returns to stand-by-status for drawing off
steam.
12.7 Programming TIMER CLOCK
A programming of the timer clock is necessary if an automa-
tic switch on time is required.
Ⅲ TIME –.–
Ⅲ Press key .
Ⅲ By briefly pressing key or you can set the hours and then
confirm by pressing key .
Ⅲ By briefly pressing key or you can set the minutes and
then confirm by pressing key .
Ⅲ You can call up the next setting by pressing key .
Ⅲ When the required water quantity is reached press key . You
can call up the next setting by pressing key .
Ⅲ There is an additional possibility to alter the water quantity
anew. Press key or for this purpose.
Ⅲ If you wish to draw another coffee to control the water quantity,
press key again otherwise press key briefly to store water
quantity in memory.
Ⅲ You can call up the next setting by pressing key .
12.4 Programming FILTER
Please read chapter 7.1 “Placing filter”.
12.5 Programming WATER HARDNESS
(only with setting FILTER NO)
Ⅲ HARDNESS LEVEL 3
Ⅲ Press key
Ⅲ By pressing key or briefly you can programme the water
hardness level.
Ⅲ Then press key briefly to store the water hardness level in
memory.
Ⅲ You can call up the next setting by pressing key .
To determine the water hardness level please read chapter 6.
“Adjusting for water hardness”.
12.6 Programming ECONOMY MODE
Ⅲ ECONOMY MODE OFF
Ⅲ Press key
Ⅲ ECONOMY (MODE OFF flashes)
Ⅲ By briefly pressing key or you can programme the mode
you would like.
