24
4 Permanent settings in programming mode
In the programme item ENERGY you can permanently set an
energy-saving mode (Energy Save Mode, E.S.M.
©
):
U
SAVE w
U
Soon after the last preparation, the IMPRESSA stops heating
up. After about 5 minutes the message
ENERGY ON is dis-
played.
U
Before you can prepare a speciality coffee, hot water or
steam, the machine must heat up.
U
SAVE -
U
All speciality coffees as well as hot water and steam can be
prepared without having to wait.
Example:Proceed as follows to change the energy-saving mode
from
SAVE - to SAVE w.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
RINSE
g T Turn the Rotary Switch until the programme item ENERGY
- is displayed.
k T Press the Rotary Switch.
SAVE -
g T Turn the Rotary Switch until SAVE w is displayed.
k T Press the Rotary Switch.
OK appears briefly on the display.
ENERGY w
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the preset time fol-
lowing the last action on the machine.
You can set the automatic switch-off time to 15minutes or 0.5–
15hours.
Example:Proceed as follows to change the automatic switch-off
from
5 HRS to 1 HRS.
Precondition:
READY is displayed.
Energy-saving mode
Automatic switch-off
