10
You can also change the water volume while coffee is being
drawn off. Simply turn the selector switch for steam/hot
water (3) to give more or less water.
If you press draw-of buttonthe machine automatically
doubles the amount of water and divides it between two cups.
7. Drawing off espresso/normal coffee
Switch on the machine by pressing button. The machine is ready as
soon as the warning lamp lights up.
Ⅲ Place 1 or 2 cups under the coffee-spout (16) and press the
appropriate button. The pre-brew function (P.B.A.S
©
) moistens
the coffee powder, briefly interrupts the flow and then the real
brewing process begins.
You can interrupt the flow of coffee at any time by simply
pressing any one of the coffee buttons.
7.1 Drawing off espresso/strong coffee
Ⅲ Place 1 cup under coffee-spout (16) and press the required
button until the warning lamp lights up.
You can only draw off 1 cup of strong coffee at a time.
7.2 Drawing off powder coffee
Ⅲ Press selector switch.Warning lamps and light up.
Ⅲ Now put 1 or 2 levelled spoons of pre-ground coffee powder into
the filling funnel for pregrownd coffee powder (12) (Fig. 2).
Ⅲ Place 1 or 2 cups under coffee-spout (16) and press the coffee
button required.
Never use soluble instant coffee or quick coffee. Only use
coffee powder from freshly ground beans or pre-ground va-
cuum-packed coffee. Never fill the funnel with more than
1 or 2 portions at a time. The powder funnel is not in-
tended as a storage container.
If selector switch is pressed by mistake, this can be cor-
rected by pressing draw-off button. The machine rinses.
We recommend a regular cleaning of the funnel with a
bottle-brush after drawing off powder coffee.
8. Using steam
Steam can be used for heating up liquids as well as for frothing up
milk for cappuccinos. To heat up liquids remember to push the
frothing nozzle (18) up. For frothing up liquids push the nozzle
down (Fig. 3).
Ⅲ Press the selector switch (14) for about 1 second. The
small light in the selector switch lights up. The warning lamp
flashes.
Ⅲ Immerse the frothing nozzle (18) into the milk you want to froth
or the liquid you want to heat up and turn the selector switch for
steam/hot water (15) to the position.
Ⅲ The machine gives off hot steam.
Ⅲ In order to end the removal of steam, put the selector switch for
steam/hot water (15) back to the position.
The max. drawing off time for steam is about 8 minutes. Due
to the start frothing. This water should be drawn off before
drawing off steam. However the perfect result (e.g. of froth-
ing milk) is not influenced.
When steam is first drawn off, there is a possibility of spat-
tering. The pivoting nozzle becomes hot. Avoid direct
contact with the skin.
