25
4 Permanent settings in programming mode
T Press the ‘<’ or ‘>’ button to change setting for the amount
of milk to
‘20sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Volume’ button.
T Press the
‘<’ or ‘>’ button to change setting for the fill vol-
ume to
‘40ml’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Next’ button.
T Press the
‘Interval’ button.
T Press the
‘<’ or ‘>’ button to change the setting for the
interval to
‘40sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Latte macchiato’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Maintenance settings (3/6)’ you can make
the following settings:
U
‘Filter’
U
Activate the CLARIS Blue filter cartridge (see Chapter 5
‘Maintenance – Inserting and activating the filter’).
U
‘Water hardness’
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Setting the water hardness’).
U
‘Switch-on rinse’ / ‘Manual’
U
The switch-on rinse must be started manually.
U
‘Switch-on rinse’ / ‘Automatic’
U
The switch-on rinse is started automatically.
U
‘Rinse the milk system’ / ‘After 10 min’
U
You are prompted to rinse the milk system 10minutes after
preparation of a speciality coffee with milk.
U
‘Rinse the milk system’ / ‘Immediate’
U
You are prompted to rinse the milk system immediately
after preparation of a speciality coffee with milk.
Maintenance settings
