468200

Jura IMPRESSA F9 Handleiding

22
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
IMPRESSA F90/F9
Instructions for use
9/06
Art. Nr. 66379
Legend:
Ⅲ DISPLAY: serves as information.
Ⅲ DISPLAY: please follow the instructions shown.
= Note = Important = Tip
JURA Elektroapparate AG, CH-4626 Niederbuchsiten,
Internet http://www.jura.com
Fig. 1 Fig. 2 Fig. 3 Fig. 4
Fig. 11
Fig. 5 Fig. 6 Fig. 7 Fig. 8
Fig. 12Fig. 9 Fig. 10
Fig. 13 Fig. 14 Fig. 15 Fig. 16
Temp. max.
Fig. 17
Fig. 19
Fig. 18
Temp. min.
7
8
11
12
13
14/15
16
17
18
4
3
2
1
5
6
9
10
19
20
Control elements
A) Display dialog system
B) Symbols (navigation in programming mode)
C) Large cup
D) Coffee
E) Espresso
F) Start (to start the draw-off operation)
G) Coffee strength «mild»
H) Coffee strength «Normal»
I) Coffee strength «strong»
1 Programming key
2 Selection key for pre-ground coffee
3 Draw-off key 1 cup
4 Draw-off key 2 cups
5 ON/OFF key
6 Maintenance key
7 Connectivity socket
8 Control panel
9 Filler funnel key for pre-ground coffee
10 Bean tank cover
11 Water tank with handle
12 Water portion draw-off key
13 Steam portion draw-off key
14 Professional Cappuccino Frother with milk pipe
15 Interchangeable hot water nozzle (see Fig. 7)
16 Height-adjustable coffee spout
17 Cup illumination (Fig. 10)
18 Coffee grounds container
19 Drip grate
20 Drip tray
21 Power switch
Sensitive Touch Screen TechnologyPROGRAMMATION
B)
8
A)
8
C) D) E) F) G) H) I)
21
6
Contents
1. Description of control panel ..............................page 7
2. Safety information ..........................................page 7
2.1 Warning.................................................page 7
2.2 Precautions .............................................page 7
2.3 Power Switch ..........................................page 8
3. Preparing the coffee machine for use...................page 8
3.1 Check the mains voltage.............................page 8
3.2 Check electrical fuse .................................page 8
3.3 Refill water.............................................page 8
3.4 Filling the bean tank .................................page 8
3.5 Adjusting the grinding gear.........................page 8
4. First use.......................................................page 8
4.1 Cup illumination.......................................page 9
5. Adjustment of water hardness ............................page 9
6. Installation of CLARIS plus filter cartridges .........page 10
6.1 Installing the filter....................................page 10
6.2 Replacing the filter ...................................page 10
7. Rinsing the coffee machine................................page 11
8. Drawing off coffee ..........................................page 11
8.1 Drawing off espresso .................................page 11
8.2 Drawing off a large cup of coffee .................page 12
8.3 Drawing off pre-ground coffee .....................page 12
9. Drawing off hot water...................................... page 12
10. Drawing off steam ..........................................page 13
11 Dispensing Cappuccino with the
Professional Cappuccino Frother ........................page 13
11.1 Dispensing Hot Milk with the
Professional Cappuccino Frother ...............page 14
11.2 Cleaning of the Professional Cappuccino
Frother ...............................................page 14
11.3 Rinsing the Professional Cappuccino
Frother ...............................................page 14
11.4 Cleaning the Professional-Cappuccino
Frother ...............................................page 14
12. Switching off the coffee machine ........................page 15
13. Programming ................................................page 15
13.1 Programming the filter ...........................page 16
13.2 Programming the water hardness...............page 16
13.3 Programming the aroma INTENSIVE
or STANDARD......................................page 16
13.4 Programming the temperature ..................page 16
13.5 Programming the water quantity ...............page 16
13.6 Programming 1 cup ...............................page 17
13.7 Programming the steam portion ................page 17
13.8 Programming the water portion ................page 18
13.9 Programming the time ............................page 18
13.10 Programming the automatic switch-on
time ...................................................page 18
13.11 Programming the automatic switch-off
time ...................................................page 19
13.12 Cup counter..........................................page 19
13.13 Programming the language ......................page 19
13.14 Connectivity .........................................page 20
14. Maintenance..................................................page 20
14.1 Refilling water ......................................page 20
14.2 Emptying the coffee grounds container........page 20
14.3 No Drip tray.........................................page 20
14.4 Filling the bean tank ..............................page 20
14.5 Replacing the filter ................................page 20
14.6 Cleaning the coffee machine .....................page 21
14.7 Coffee machine calcified ..........................page 21
14.8 General cleaning instructions ....................page 21
14.9 Emptying the system ..............................page 21
15. Cleaning .......................................................page 21
16. De-scaling.....................................................page 22
17. Disposal .......................................................page 23
18. Tips for perfect coffee......................................page 23
19. Messages ......................................................page 24
20. Problems ......................................................page 25
21. Legal information ...........................................page 26
22. Technical data ...............................................page 26
7
Important information
Thank you very much for purchasing this IMPRESSA coffee
machine.
Before using your new coffee machine for the first time, carefully
read this operating manual and keep it for future reference.
Should you need more information or if you meet with particular
problems not specified in these operating instructions in sufficient
detail, either contact us directly or contact your local authorized
dealer.
You will also find useful tips on operation and maintenance
of your IMPRESSA on the website at www.jura.com.
Don’t forget to check out the Knowledge Builder our ani-
mated operating instructions. LEO, our assistant, will take
you through all the functions.
1. Description of control panel
A gentle push on the control panel will do, and the sensors will
read your wish from your fingertips. The IMPRESSA offers Café à
la Carte, coffee to the taste of everybody. You can select one of the
programmed coffee specialities at a gentle touch on the touch
screen.
As a result of high electromagnetic interference, the touch screen
may become inactive. All the remaining draw-off keys, the selec-
tion key for pre-ground coffee, draw-off key 1 cup, draw-off key 2
cups, can still be used.
2. Safety information
2.1 Warning
Ⅲ Children do not realize the dangers involved in using electric
appliances, for this reason always keep an eye on children when
they use electric appliances.
Ⅲ The coffee machine may only be used by instructed persons.
Ⅲ Never use a defective coffee machine or a machine with a
defective mains cable.
Ⅲ Never immerse the coffee machine in water.
Ⅲ Never repair or open the coffee machine yourself. Any repairs
may only be carried out by authorized service shops using ori-
ginal spare parts and accessories.
2.2 Precautions
Ⅲ Never expose the coffee machine to weather (rain, snow, frost),
never touch the machine when your hands are wet.
Ⅲ Place the IMPRESSA on a firm, level base that is resistant to
any water that may leak. Never stand on hot or warm surfaces
(oven hobs). Keep out of the reach of children.
Ⅲ If you don’t use the machine for a longer time (holidays, etc.)
always disconnect the mains cable.
Ⅲ Always disconnect mains cable before cleaning the machine.
Ⅲ When disconnecting the mains cable never pull on the mains
cable or the machine itself.
Ⅲ The coffee machine is connected to mains supply via a mains
cable. Make sure nobody can trip over the mains cable. Make
sure children and pets cannot reach the machine
Ⅲ Never put the coffee machine or individual parts of it into a
dishwasher.
Ⅲ Make sure to install the machine at a place with sufficient air
circulation, to prevent overheating of the machine.
E
8
2.3 Power switch
Actuate the power switch (21) on your IMPRESSA before
using the machine for the first time.
We recommend that you switch off your IMPRESSA with
the power switch (21) if you intend not to use the machine
for longer periods of time (e.g.during holidays)
3. Preparing the coffee machine for use
3.1 Check the mains voltage
The coffee machine is preset in the factory to the correct mains
voltage. Check if your local mains supply voltage complies with
the information given on the type plate on the underside of the
coffee machine.
3.2 Check electrical fuse
The coffee machine is designed for an electric current of 10
Ampères. Check if the electrical fuse has sufficient capacity.
3.3 Refill water
Only use fresh, cold water. Never fill in milk, mineral water
or other liquids.
Ⅲ Take out the water tank and thoroughly rinse it with cold tap
water (Fig. 1).
Ⅲ Then fill the water tank and re-install it in the coffee machine.
Make sure the tank is installed correctly and that it engages
properly.
3.4 Filling the bean tank
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your JURA coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding ge-
ar. Any repair costs resulting from the use of such blends are
not covered by warranty.
Ⅲ Open the cover of the bean tank (10).
Ⅲ Remove any dirt or foreign matter from the bean tank.
Ⅲ Fill coffee beans in the bean tank and close the cover.
3.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We
recommend that you use
a fine adjustment Ǟ (the smaller the dots, the finer the
grinding is) for a light roast
a coarse adjustment Ǟ (the bigger the dots, the coarser the
grinding is) for a dark roast
The grinding degree may only be adjusted while the grinding
gear is running.
Ⅲ Open the cover of the bean tank (10).
Ⅲ To adjust the grinding degree turn the rotary switch (Fig. 2) to
the required position.
4. First use
Ⅲ Fill coffee beans in the bean tank (10).
Ⅲ Fill water tank.
Ⅲ Switch on your coffee machine using the key .
Ⅲ WWW.IMPRESSA-F-LINE.COM
9
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ FILL SYSTEM / WATER PORTION
Ⅲ Place a receptacle under the Professional Cappuccino Frother
(14) (Fig. 14).
Ⅲ Press water portion draw-off key
Ⅲ SYSTEM FILLING
Ⅲ MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Press symbol .
Ⅲ COFFEE NORMAL
If FILL BEANS is displayed, touch the symbol
again. The mill was still empty.
To get an excellent crema, adjust the coffee spout (16) to the
size of your cup (Fig. 3 ).
4.1 Cup illumination
The cup illumination puts your coffee in a good light, making it a
treat for the eyes.
When you plug in or switch on the machine or press any key, the
cup illumination is activated for 1 minute. To switch on the cup
illumination, with the machine switched off, press any key (Fig. 10).
5. Adjustment of water hardness
In the coffee machine water is heated up. As a result, calcifi-
cation occurs during normal use and is indicated auto-
matically. Before using the machine for the first time the
hardness of the water used must be adjusted. Use the sup-
plied test sticks for this.
1° German hardness is equivalent to 1.79° French hardness.
The coffee machine has 5 hardness degrees which can be used and
are displayed while you are adjusting the water hardness.
The displayed information means the following:
WATER
HARDNESS –– Water hardness function switched off
WATER German water hardness degree 1 to 7°
HARDNESS 1 French Water hardness degree 1.79 – 12.53°
WATER German water hardness degree 8 to 15°
HARDNESS 2 French Water hardness degree 14.32 – 26.85°
WATER German water hardness degree 16 to 23°
HARDNESS 3 French Water hardness degree 28.64 – 41.14°
WATER German water hardness degree 24 to 30°
HARDNESS 4 French Water hardness degree 42.96 – 53.7°
When the machine leaves the factory it is adjusted to WATER
HARDNESS 3. You can adjust another hardness. To do this,
proceed as follows:
Pull out the mains cable from the cable box on the rear side of the
coffee machine and connect the machine to mains supply.
Ⅲ Press the key to switch on the coffee machine.
Ⅲ WWW.IMPRESSA-F-LINE.COM
Ⅲ Your coffee machine is switched to start-up position.
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ FILTER NO
E
10
Ⅲ Press symbol until the following message is displayed:
Ⅲ WATER HARDNESS 3
Ⅲ Press symbol , you will hear an acoustic signal and the
hardness degree flashes.
Ⅲ Now, press symbols to adjust the required hardness
degree.
Ⅲ Press symbol to confirm the new settings.
Ⅲ WATER HARDNESS 4
Ⅲ Press programming key to leave Programming Mode.
Ⅲ PLEASE SELECT
6. Installation of CLARIS plus filter cartridges
If the CLARIS plus filter cartridge is installed properly, de-
scaling of the coffee machine is no longer required. For
more information on the CLARIS plus filter cartridge refer
to brochure «CLARIS plus». Hard on limescale. Gentle on
your coffee machine.»
6.1 Installing the filter
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Fold up the cartridge holder. Insert the filter cartridge in the
water tank (Fig. 4)
Ⅲ Close the cartridge holder until it engages audibly.
Ⅲ Fill the water tank with cold, fresh tap water and install it again.
Ⅲ Press Programming key until you hear an acoustic signal.
Ⅲ NO FILTER
Ⅲ Press symbol , NO flashes on the display.
Ⅲ Press symbol until the following message is displayed:
Ⅲ FILTER YES (YES flashes)
Ⅲ Press symbol .
Ⅲ INSTALL FILTER / WATER PORTION
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(14) to the steam position (Fig. 18).
Ⅲ Place a sufficiently large receptacle (at least 0.5 litre) under the
Professional Cappuccino Frother (14) and press the water portion
draw-off key .
Ⅲ FILTER RINSING. The water draw-off operation is
stopped automatically.
Ⅲ MACHINE HEATING UP
Ⅲ PLEASE SELECT
Now you have activated the filter. In Programming Mode the
water hardness selection function is no longer displayed.
6.2 Replacing the filter
After 50 litres of water the filter cartridge will need to be
replaced. The display will prompt you to change the filter.
Please monitor the period of use of the CLARIS plus filter
cartridge (max. 2 months) using the scale on the cartridge
holder by the water tank.
Ⅲ REPLACE FILTER / PLEASE SELECT
Ⅲ Use the key to switch off the coffee machine.
Ⅲ GOOD BYE
Ⅲ Press maintenance key for some seconds, with the machine
switched off.
11
Ⅲ INSTALL FILTER / WATER PORTION
Ⅲ Fold up the cartridge holder. Insert the filter cartridge in the
water tank (Fig. 4)
Ⅲ Close the cartridge holder until it engages audibly.
Ⅲ Fill the water tank with cold, fresh tap water and reinstall it in
the coffee machine.
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(14) to the steam position (Fig. 18).
Ⅲ Place a sufficiently large receptacle (at least 0.5 litre) under
the Professional Cappuccino Frother (14) and press the draw-off
key .
Ⅲ FILTER RINSING. The water draw-off operation is
stopped automatically.
Ⅲ MACHINE HEATING UP
Ⅲ PLEASE SELECT
7. Rinsing the coffee machine
When the coffee machine was switched off and has cooled
down in the meantime, a rinsing operation is started when
the machine is switched on again. When the machine is
switched off, a rinsing operation is started automatically.
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
8. Drawing off coffee
You can change the selected product at any time by pressing
the symbols before starting the operation by pressing
. The selected product is displayed.
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Place 1 cup under the adjustable coffee spout (16) and press
symbol .
Ⅲ COFFEE NORMAL
Ⅲ Press symbols (/ / )to select the strength of your coffee.
Ⅲ COFFEE STRONG
Ⅲ Press symbol .
Ⅲ COFFEE STRONG Your product is being prepared.
Ⅲ PLEASE SELECT
8.1 Drawing off espresso
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Place 1 cup under the adjustable coffee spout (16) and press
symbol .
Ⅲ ESPRESSO NORMAL
E
12
Ⅲ Press (/ / )to select the strength of your espresso.
Ⅲ ESPRESSO STRONG
Ⅲ Press symbol .
Ⅲ ESPRESSO STRONG. Your product is being pre-
pared.
Ⅲ PLEASE SELECT
8.2 Drawing off a large cup of coffee
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Place 1 cup under the adjustable coffee spout (16) and press
symbol .
Ⅲ LARGE CUP NORMAL
Ⅲ Press (/ / )to select the strength of your coffee.
Ⅲ LARGE CUP MILD
Ⅲ Press symbol .
Ⅲ LARGE CUP MILD Your product is being prepared.
Ⅲ PLEASE SELECT
8.3 Drawing off pre-ground coffee
Never use instant coffee or quick-coffee. We recommend
that you always use powder from fresh coffee beans or, pre-
ground, vacuum-packed coffee. Never fill in more than 2
portions of powder. The pre-ground coffee tank is no storage
tank. Make sure that the pre-ground you use is not too fine.
This may cause blocking of the system. In this case the
coffee only drips out of the coffee spout.
If you press the draw-off key unintentionally, you can stop
the operation by pressing the maintenance key. Your coffee
machine will carry out a rinsing operation.
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Press selection key .
Ⅲ FILL IN POWDER / PLEASE SELECT
Ⅲ Now fill in 1 or 2 level dosing spoonfuls of pre-ground coffee in
the filler funnel for pre-ground coffee (Fig. 5).
Ⅲ Place 1 cup under the adjustable coffee spout (16) and press the
corresponding symbol ( / / ).
Ⅲ LARGE CUP POWDER
Ⅲ Press symbol .
Ⅲ LARGE CUP POWDER Your powder coffee is be-
ing prepared.
Ⅲ PLEASE SELECT
9. Drawing off hot water
You can adjust the water portion individually (see Chapter
12 Programming). Install the hot water jet (Fig. 7) to obtain
perfect water flow.
At the start of the water draw-off there can be splashing
Avoid direct contact with the skin!
Do not replace the replaceable hot water jet directly after
drawing off water, because the jet is hot after the draw-off
operation.
13
Ⅲ STEAM PORTION. Your product is being prepared.
Ⅲ PLEASE SELECT
You can also abort the dispensing, by pressing the steam
portion draw-off button early.
11. Dispensing Cappuccino with the
Professional Cappuccino Frother
Cappuccino comprises one third each of Espresso, hot milk
and milk foam. You produce the milk portion with the Pro-
fessional Cappuccino Frother (14).
When steam is drawn, a vacuum is produced which, with the
aid of the Professional Cappuccino Frother (14), draws in the
milk and produces milk foam.
To ensure perfect function, the Professional Cappuccino
Frother (14) must be cleaned regularly.
Make sure that the nozzle is correctly fitted. If the nozzle
becomes blocked with particles of milk residue or is incor-
rectly assembled, a danger can arise during use whereby the
nozzle may jump off.
Ⅲ When using for the first time, remove the protective cover from
the Professional Cappuccino Frother (14) (Fig. 9). The protective
cover is used only during transport as protection to prevent the
ingress of contaminated materials.
Ⅲ Remove the milk pipe from the Welcome Pack and connect it to
the Professional Cappuccino Frother (14).
Ⅲ Insert the other end of the milk pipe into a Tetra Pak of milk or
connect it to a milk container (Fig. 11).
Ⅲ Place a cup under the Professional Cappuccino Frother (14)
(Fig. 11).
Ⅲ Place a cup under the hot water jet (15).
Ⅲ Press water draw-off key .
Ⅲ WATER PORTION
Ⅲ The programmed portion is being prepared. You can stop the
draw-off operation at any time by pressing the draw-off key .
Ⅲ PLEASE SELECT
10. Drawing off steam
The steam function is used for the preparation of milk foam
and hot milk, as well as for the Professional Cappuccino
Frother (14) cleaning programme.
With the optionally available 2-stage frothing nozzle, liquids
can be heated and frothed using the steam function.
Make sure that the nozzle is correctly fitted when drawing
steam. If the nozzle becomes blocked with particles of milk
residue or is incorrectly assembled, a danger can arise during
use whereby the nozzle may jump off.
Due to the system design, some water will escape at first
when steam is drawn. However, this will not affect the result
in any way.
When drawing steam, spluttering can occur at the start. The
nozzle becomes hot in use. Avoid any direct skin contact.
Ⅲ PLEASE SELECT
Ⅲ Press steam portion draw-off key .
Ⅲ MACHINE HEATING UP
Ⅲ PLEASE SELECT
Ⅲ Press steam draw-off key again.
E
14
A useful addition is available for all lovers of milk speciali-
ties in the form of high-quality vacuum milk containers.
They keep the milk cool the whole day long and are opti-
mally suited to the design of your IMPRESSA.
All original JURA accessories can be obtained from the
specialist shop.
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(14) to the milk foam position (Fig. 17).
Ⅲ PLEASE SELECT
Ⅲ Press the steam portion draw off key (13).
Ⅲ MACHINE HEATING UP
Ⅲ PLEASE SELECT
Ⅲ Press the steam portion draw off key (13) again.
Ⅲ STEAM PORTION
Ⅲ Preparation of milk foam will continue for the period you have
programmed for the steam portion. (See “Programming steam
portion” Chapter 13.7).
Adjust the steam dispensing time to suit the size of your cup.
You can also abort the dispensing, by pressing the steam
portion draw-off button early.
Ⅲ Now, move your cup with the milk foam and place it under the
coffee spout and dispense the required coffee product (Fig. 12).
Your Cappuccino is ready.
11.1 Dispensing Hot Milk with the
Professional Cappuccino Frother
Turn the selector switch of the Professional Cappuccino
Frother (14) to the milk range (Fig. 19).
The procedure for dispensing hot milk is the same as the
procedure for dispensing milk foam for Cappuccino (Chapter
11).
11.2 Cleaning of the
Professional Cappuccino Frother
To ensure that the Professional Cappuccino Frother functions
perfectly, you should rinse it with water each time after
preparing milk.
You will not be prompted by your IMPRESSA to rinse the
Professional Cappuccino Frother.
11.3 Rinsing the Professional Cappuccino Frother
Ⅲ Carefully pull off the Professional Cappuccino Frother from your
IMPRESSA.
Ⅲ Dismantle the Professional Cappuccino Frother (14) into its indi-
vidual parts (Fig. 15).
Ⅲ Thoroughly rinse all parts of the nozzle under running water.
Ⅲ Reassemble the Professional Cappuccino Frother (14) and refit it
on to your IMPRESSA.
11.4 Cleaning the Professional Cappuccino Frother
To ensure that the Professional Cappuccino Frother (14)
functions perfectly, you should clean it daily if you have pre-
pared milk foam or hot milk.
You will not be prompted by your IMPRESSA to clean the
Professional Cappuccino Frother (14).
15
You can obtain the JURA Auto-Cappuccino Cleaner from
the specialist shop.
Ⅲ Place a receptacle under the Professional Cappuccino Frother
(14) (Fig. 13).
Ⅲ Fill a second receptacle with 2.5 dl of fresh water and add one
capful of the Auto-Cappuccino Cleaner.
Ⅲ Dip the milk pipe into the second receptacle with the Auto-Cap-
puccino Cleaner. (Fig. 13)
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(14) to the milk position (Fig. 19) or to the milk foam position
(Fig. 17).
Ⅲ PLEASE SELECT
Ⅲ Press the steam portion draw off key (13).
Ⅲ MACHINE HEATING UP
Ⅲ PLEASE SELECT
Ⅲ Press the steam portion draw off key (13) again.
Ⅲ STEAM PORTION. Your product is being prepared.
Ⅲ Draw steam until the receptacle with the Auto-Cappuccino
Cleaner is empty.
This procedure cleans the Professional Cappuccino Frother and
the milk pipe.
Ⅲ Fill the receptacle with 2.5 dl of fresh water.
Dip the milk pipe into the receptacle with the fresh water.
Ⅲ Press steam portion draw-off key .
Ⅲ MACHINE HEATING UP
Ⅲ PLEASE SELECT
Ⅲ Press steam draw-off key again.
Ⅲ STEAM PORTION
Ⅲ Draw steam until the receptacle with the fresh water is empty.
This procedure rinses the Professional Cappuccino Frother (14)
and the milk pipe with fresh water.
Ⅲ Cleaning of the Professional Cappuccino Frother (14) is now
complete, your IMPRESSA is ready for use.
12. Switching off the coffee machine
To ensure perfect operation, please switch your IMPRESSA
to standby mode with the symbol first. Then switch the
machine off with the power switch (21).
Ⅲ Use the key to switch on the coffee machine.
Ⅲ PLEASE SELECT
Ⅲ Use key to switch OFF your coffee machine.
Ⅲ GOOD BYE
Ⅲ The automatic rinsing operation is started.
13. Programming
When your coffee machine leaves the factory it is adjusted such
that you can draw off coffee without having to change any settings.
However, you can programme various parameters individually.
You can programme the following stages:
¼ Filter
¼ Water hardness
¼ Aroma
¼ Temperature
¼ Water quantity for coffee
¼ 1 Cup
¼ Steam portion
¼ Water portion
¼ Time
¼ Automatic switch-on time
¼ Automatic switch-off time
¼ Draw offs
¼ Language
E
16
13.1 Programming the filter
Refer to Chapter 6.1 «Inserting the filter».
13.2 Programming the water hardness
Refer to Chapter 5 «Adjusting the water hardness».
13.3 Programming the aroma INTENSIVE or
STANDARD
The aroma for the powder quantities ( / / ) was
adjusted to Intensive in the factory. If requested it can also
be set to Standard.
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING:
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Touch symbol until the following message is displayed:
Ⅲ AROMA INTENSIVE
Ⅲ Press symbol , you will hear an acoustic signal, IN-
TENSIVE flashes.
Ⅲ Use the symbols to adjust the aroma to STANDARD.
Ⅲ Press symbol to confirm the new settings.
Ⅲ AROMA STANDARD
Ⅲ Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
13.4 Programming the temperature
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Touch symbol until the following message is displayed:
Ⅲ TEMP. HIGH
Ⅲ Press symbol , you will hear an acoustic signal and HIGH
flashes.
Ⅲ Use the symbol to adjust the temperature to NORMAL.
Ⅲ Press symbol to confirm your settings.
Ⅲ TEMP. NORMAL
Ⅲ Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
13.5 Programming the water quantity
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING:
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Press symbol until the following message is displayed:
Ⅲ WATER QUANTITY
Ⅲ Press symbol .
17
Ⅲ SELECT PRODUCT
Ⅲ Select the product, the water quantity of which you want to
programme ( / / )
Ⅲ COFFEE 90 ML
Ⅲ Press symbol , the value flashes.
Ⅲ Use symbols to change the value in 5 ml increments.
Ⅲ Press symbol to save the water quantity for this product.
Ⅲ WATER QUANTITY
Ⅲ Use the symbols to reach the next programming stage
or press programming key to quit Programming Mode.
13.6 Programming 1 cup
Now, you will program the draw-off key 1 cup (3). This has
no influence on the touch screen.
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING:
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Press symbol until the following message is displayed:
Ⅲ 1 CUP 120 ML.
Ⅲ Press symbol , the value flashes.
Ⅲ Use symbols to change the value in 5 ml increments.
Ⅲ Press symbol to save the water quantity for 1 cup.
Ⅲ 1 CUP NORMAL
Ⅲ Press one of the symbols ( / / ) to select the strength of
your coffee.
Ⅲ 1 CUP STRONG
Ⅲ Press symbol to save the new settings.
Ⅲ 1 CUP 180 ML (for example)
Ⅲ Use the symbols to reach the next programming stage or
press key to quit Programming Mode.
These settings were taken over for the draw-off key for 2
cups.
13.7 Programming the steam portion
The programmable steam portion time is between 3 and 60
seconds.
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING:
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Press symbol until the following message is displayed:
Ⅲ STEAM 20 SEC.
Ⅲ Press symbol , the value 20 flashes.
Ⅲ Press symbols to change the value.
Ⅲ Press symbol to save the new value.
Ⅲ STEAM 40 SEC (Example)
Ⅲ Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
E
18
13.8 Programming the water portion
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Press symbol until the following message is displayed:
Ⅲ WATER PORTION
Ⅲ Press symbol , you will hear an acoustic signal.
Ⅲ PRESS KEY
Ⅲ Press water portion draw-off key .
Ⅲ ENOUGH WATER? PRESS MAINTENANCE.
When the required water quantity is reached press key . The
water draw-off operation is stopped, the water portion is
programmed now.
Ⅲ Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
13.9 Programming the time
You must programme the time if you want to use the
automatic switch-on function.
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING:
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Press symbol until the following message is displayed:
Ⅲ TIME —:—
Ⅲ Press symbol , you will hear an acoustic signal and —:—
flashes.
Ⅲ Use symbols to adjust the hours and confirm by pressing
.
Ⅲ Use symbols to adjust the minutes and confirm by
pressing . The time is now programmed.
Ⅲ Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
If the machine is disconnected from mains supply, the time
must be programmed again.
13.10 Programming the automatic switch-on time
You must programme the time (Chapter 13.9) if you want to
use the automatic switch-on function.
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING:
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Press symbol until the following message is displayed:
Ⅲ MACHINE ON —:—
Ⅲ Press symbol , you will hear an acoustic signal and —:—
flashes.
19
Ⅲ Use the symbols to select the hours and confirm by
pressing .
Ⅲ Use symbols to adjust the minutes and confirm by
pressing . The switch-on time is now programmed.
Ⅲ Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
13.11 Programming the automatic switch-off time
You can programme your coffee machine such that it will
switch off automatically after a certain time. You can
programme the switch-off time in a range between 0.5 and 9
hours, or select –:– (i.e. function switched off).
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING:
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Press symbol until the following message is displayed:
Ⅲ OFF AFTER 5.0 HOURS
Ⅲ Press symbol , you will hear an acoustic signal and 5.0
flashes.
Ⅲ Use the symbols to select the hours and confirm by
pressing .
Ⅲ Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
13.12 Cup counter
This function is available with the following products:
In Aroma Select via symbols , , and via the pre-
ground coffee draw-off key , draw-off key for 1 cup
and draw-off key for 2 cups .
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Press symbol until the following message is displayed:
Ⅲ DRAW OFFS ....... (Total number of draw offs)
Ⅲ To learn how often a function was selected, press the cor-
responding key or symbol.
Ⅲ Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
13.13 Programming the language
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ Press symbol until the following message is displayed:
Ⅲ SPRACHE DEUTSCH
E
20
Ⅲ Press symbol , you will hear an acoustic signal and
DEUTSCH flashes.
Ⅲ Press symbols to select the required language.
Ⅲ Press symbol to save the new settings.
Ⅲ LANGUAGE ENGLISH
Ⅲ Use the symbols to reach the next programming stage or press
programming key to quit Programming Mode.
13.14 Connectivity
With the Connectivity system it is possible for your IMPRESSA
F90 to communicate with your PC and the Internet. To use this
feature, you will need a kit which you can order at www.impressa-
f-Line.com or your local authorized dealer. Available as an
optional extra.
14. Maintenance
14.1 Refilling water
Ⅲ REFILL WATER
Ⅲ If this information is displayed, drawing off products is no
longer possible. Refill water as described in Chapter 3.3.
Ⅲ PLEASE SELECT
The water tank should be rinsed daily and refilled with fresh
water. Only fill in fresh, cold water. Never fill in milk,
mineral water or other liquids.
14.2 Emptying the coffee grounds container
Ⅲ EMPTY COFFEE GROUNDS CONTAINER
Ⅲ If this information is displayed, drawing off products is no
longer possible and the coffee grounds container must be
emptied (Fig.8 ).
Your coffee machine must be switched on.
Ⅲ Carefully take out the drip tray, it is filled with water.
Ⅲ NO TRAY
Ⅲ PLEASE SELECT
The red water level warning message appears when the
coffee drip tray is full.
14.3 No Drip tray
Ⅲ NO TRAY
Ⅲ If this information is displayed, the drip tray is not installed
properly or was not installed at all.
Ⅲ PLEASE SELECT
14.4 Filling the bean tank
Ⅲ REFILL BEANS
Ⅲ We recommend that you clean the bean tank regularly before
refilling beans, using a dry cloth. Before doing this, switch off
the coffee machine.
Ⅲ Refill beans as described in Chapter 3.4.
The message REFILL BEANS will disappear after you draw
off your next cup of coffee.
14.5 Replacing the filter
After drawing off 50 liters the filter cartridge will be used
up.
Refer to Chapter 6.2 «Replacing the filter».
21
14.6 Cleaning the coffee machine
After 200 draw-off operations or after 160 rinsing operations, the
coffee machine must be cleaned. A message appears on the display,
telling you to start the cleaning programme. You can still draw off
coffee or hot water/steam. However, we recommend that you
should clean the machine (Chapter 15) within the next few days.
Ⅲ CLEAN MACHINE / PLEASE SELECT
14.7 Coffee machine calcified
During normal use of the coffee lime scaling will occur. The
degree of calcification depends on the hardness of the water you
use. The machine will inform you when de-scaling is required. You
can still draw off coffee or hot water/steam. However, we recom-
mend that you should de-scale the machine (Chapter 16) within the
next few days.
Ⅲ MACHINE CALCIFIED / PLEASE SELECT
14.8 General cleaning instructions
Ⅲ Never use scrapers, abrasive cloths, sponges or caustic chemicals
for cleaning.
Ⅲ Clean the inside and outside of the case using a soft, moist
cloth.
Ⅲ Clean the 2-stage frothing jet each time it was used.
Ⅲ Clean the control panel with a micro-fibre cloth.
Ⅲ To ensure that the Professional Cappuccino Frother functions
perfectly, you should rinse it with water each time after prepar-
ing milk.
Ⅲ To ensure that the Professional Cappuccino Frother functions
perfectly, you should clean it daily if you have prepared milk.
Ⅲ The water tank should be rinsed daily and refilled with fresh
water.
If lime-scaling forms in the tank, remove it using a com-
mercial de-scaling agent. Take out the water tank.
If you use a CLARIS plus filter cartridge, remove it before
de-scaling the tank.
14.9 Emptying the system
This is necessary to protect the coffee machine against
damage occurring during transport as a result of frost.
Ⅲ Use the key to switch off the coffee machine.
Ⅲ Place a receptacle under the Professional Cappuccino Frother
(14) (Fig. 14).
Ⅲ Turn the selector switch of the Professional Cappuccino Frother
(14) to the steam position (Fig. 18).
Ⅲ Press the steam portion draw-off key until the following
message appears.
Ⅲ SYSTEM EMPTYING
Ⅲ The coffee machine is switched off.
15. Cleaning
The coffee machine features an integrated cleaning programme.
The procedure takes some 15 minutes.
Original JURA cleaning tablets which are specially designed
for the cleaning program of your IMPRESSA are available at
your authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate cleaning agents.
Once started, the cleaning operation must not be interrupted.
After each cleaning operation the filler funnel for the 2nd
coffee type should be cleaned.
E
22
Ⅲ CLEAN MACHINE / PLEASE SELECT
Ⅲ Press maintenance key until the following message appears.
Ⅲ EMPTY TRAY. Take out the tray, empty it and re-
install it.
Ⅲ PRESS MAINTENANCE
Ⅲ Press maintenance key .
Ⅲ MACHINE CLEANING
Ⅲ TABLET / PRESS MAINTENANCE (Fig. 6). You
will hear an acoustic signal.
Ⅲ MACHINE CLEANING
Ⅲ EMPTY TRAY. You will hear an acoustic signal.
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE CLEANING
Ⅲ EMPTY TRAY. You will hear an acoustic signal.
Ⅲ PLEASE SELECT
Ⅲ Wipe coffee powder tank with a dry cloth after the cleaning
program has finished.
Ⅲ Now the cleaning operation is complete.
16. De-scaling
The coffee machine features an integrated de-scaling programme.
The procedure takes some 30 minutes.
Original JURA de-scaling tablets which are specially
designed for the de-scaling program of your IMPRESSA are
available at your authorized dealer. Please note that machine
defects or residues in the water cannot be excluded if you
use inappropriate de-scaling agents.
Your machine will inform you if it needs de-scaling.
You can still draw off coffee or hot water / steam and start
the de-scaling programme later.
Switch off the system before starting the de-scaling pro-
gramme. Once started, the de-scaling programme must not
be interrupted.
If acidic de-scaling agents are used, remove any splashes and
drops from sensitive surfaces, in particular surfaces made of
natural stone and wood, alternatively take appropriate pre-
ventive measures.
In any case wait until the de-scaling agent is used up and the
tank is empty. Never refill de-scaling agent.
Ⅲ MACHINE CALCIFIED / PLEASE SELECT
Ⅲ Use the key to switch off the coffee machine.
Ⅲ GOOD BYE
Ⅲ Remove the Professional Cappuccino Frother (14).
Ⅲ Take out the water tank.
Ⅲ Press maintenance key until the following message appears.
Ⅲ EMPTY TRAY
Ⅲ AGENT IN TANK
Completely dissolve the content of one blister (3 tablets) in a
jug containing 0.5 liters of water, and fill the mixture in the
water tank. Reinstall the water tank.
Ⅲ Place a sufficiently large receptacle under the hot water spout
(Fig. 16).
Ⅲ PRESS MAINTENANCE / AGENT IN TANK
Ⅲ Machine de-scaling
Ⅲ The de-scaling agent comes out of the hot water jet in intervals.
After some intervals the de-scaling agent is discharged directly
in the drip tray.
Ⅲ EMPTY TRAY. You will hear an acoustic signal.
Ⅲ REFILL WATER
23
Thoroughly rinse the water tank and fill it with fresh cold tap
water. Then reinstall it.
Ⅲ Place a sufficiently large receptacle under the hot water spout
(Fig. 16).
Ⅲ PRESS MAINTENANCE / REFILL WATER
Ⅲ MACHINE DE-SCALING
Ⅲ The water comes out of the hot water jet in intervals. After some
intervals the water is discharged directly in the drip tray.
Ⅲ EMPTY TRAY. You will hear an acoustic signal.
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING:
Ⅲ PLEASE SELECT
After the de-scaling, clean the aluminium front using a
slightly moist cloth.
17. Disposal
Please dispose of old machines in an environmentally
compatible way
Old machines contain valuable materials capable of being
recycled which should be salvaged for recycling. Please
therefore dispose of old machines via suitable collection
systems.
18. Tips for perfect coffee
Adjustable coffee spout
You can adjust the height of the coffee spout to the size of your
cups
Grinding degree
Refer to Chapter 3.5 «Adjusting the grinding gear».
Preheating cups
You can preheat the cups using hot water or steam. The smaller the
coffee you want to draw off, the more important preheating is.
Sugar and cream
Stirring coffee/tea will result in heat being released. Adding
refrigerated cream or milk will reduce the temperature of the coffee
significantly.
E
24
19. Messages
Cause Remedy
REFILL WATER Water tank is empty. Refill water
Float defective Rinse or de-scale water tank
REFILL BEANS Bean tank is empty. Refill beans
Although you have refilled beans, Draw off a cup of coffee.
the message still appears. The message will disappear only after you have
drawn off a cup of coffee
EMPTY COFFEE Coffee grounds container full Empty coffee grounds container
GROUNDS CONTAINER
Tray reinstalled too early after emptying Wait 10 sec. before reinstalling the tray
NO TRAY Drip tray not installed properly or missing Install tray properly
CLEAN MACHINE Cleaning required Start cleaning programme (Chapter 15)
MACHINE CALCIFIED De-scaling required Start de-scaling programme (Chapter 16)
REPLACE FILTER Filter empty Change filter (Chapter 6.2)
FAULT General fault 1) – switch off
– disconnect from mains supply
– connect machine to mains supply
– switch on machine
2) Have machine checked by JURA Service
25
20. Problems
Problem Cause Remedy
Very loud noise coming Foreign body in grinding gear Drawing off pre-ground coffee is still possible
from the grinding gear
Have machine checked by JURA Service
Too little foam when Professional Cappuccino Frother has Clean the Professional Cappuccino Frother
frothing the milk become dirty (Chapter 11)
Individual parts of the Professional Check correct assembly of the
Cappuccino Frother are incorrectly assembled Professional Cappuccino Frother
Coffee only drips from Grinding degree too fine Coarser grinding gear adjustment
the coffee spout
Pre-ground coffee too fine Use a coarser pre-ground coffee
If the messages or problems are still present, please contact your local authorized dealer or JURA Elektroapparate AG.
E
26
22. Technical data
Voltage: 230V AC
Power: 1450 W
Intensity of current: 10 A
Safety check:
Energy consumption Standby: approx. 3.5 Wh
Energy consumption «Ready for
draw-off»: approx. 11.5 Wh
Pump pressure: static max. 15 bar
Water tank: 1.9 litres
Bean tank capacity: 200gr
Coffee grounds container capacity: max. 16 portions
Length of mains cable: approx. 1.1 m
Weight: 9.7 kg
Dimensions (WxHxD): 28 x 34.5 x 44.5cm
The machine complies with the following EU directives:
73/23/EWG dated 19/02/1973 “Low Voltage Directive” including
Modification Directive 93/336/EWG
89/336/EWG dated 03/05/1989 “EMC Directive” including
Modification Directive 92/31/EWG
21. Legal information
These operating instructions contain all the information required
for using, operating and maintaining the machine properly.
Knowledge of and compliance with the specifications contained in
these operating instructions is required for using the machine safely
as well as for operational safety and safety during maintenance.
These operating instructions cannot cover any conceivable appli-
cation. The machine was designed for private household use.
Additionally we point out that the content of these operating
instructions does not form part of any previous or existing agree-
ment, consent or al legal relationship nor does it constitute a
change of such a(n) agreement, consent or legal relationship. Any
obligations to be fulfilled by JURA Elektroapparate AG are stipu-
lated in the corresponding purchase contract, which also contains
the full and solely applicable warranty stipulations. These con-
tractual warranty stipulations are neither extended nor limited by
the specifications contained in these operating instructions.
The operating instructions contain information, protected by Copy-
right. Photocopying or translations into other languages shall not be
permissible without JURA Elektroapparate AG’s written approval.
… 22 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jura IMPRESSA F9 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jura IMPRESSA F9 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Jura IMPRESSA F9

Jura IMPRESSA F9 Gebruiksaanwijzing - Nederlands - 27 pagina's

Jura IMPRESSA F9 Gebruiksaanwijzing - Deutsch - 27 pagina's

Jura IMPRESSA F9 Gebruiksaanwijzing - Français - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info