16
13.3 Rinsing the Professional Cappuccino Frother
To ensure that the Professional Cappuccino Frother (15) works
perfectly, you should rinse it with water after every milk prepa-
ration.
Your IMPRESSA will not prompt you to rinse the Professional
Cappuccino Frother.
Ⅲ READY
Ⅲ Remove the milk pipe from the milk carton or the milk container.
Ⅲ Fill a receptacle with fresh water and immerse the milk pipe in it.
Ⅲ Place a receptacle under the Professional Cappuccino Frother and
move the selector switch to the Milk foam or Milk position.
Ⅲ Press the steam preselection button (8).
Ⅲ HEATING
Ⅲ READY
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 13) to draw off
steam. The frother and milk pipe are rinsed.
Ⅲ STEAM
Ⅲ
ⅥⅥⅥⅪⅪⅪⅪⅪⅪⅪ
Ⅲ Ignoring the CLOSE TAP display message, draw off steam until
clean water runs out of the frother. Then close the steam / hot water
draw-off tap (14).
Ⅲ READY
13.4 Dismantling and rinsing the Professional
Cappuccino Frother
Ⅲ Carefully remove the Professional Cappuccino Frother (15) from
your IMPRESSA by twisting slightly.
Ⅲ Dismantle the Professional Cappuccino Frother (15) into its indiv -
idual parts (Fig. 16).
Ⅲ Rinse all frother parts thoroughly under running water.
Ⅲ Re-assemble the frother and refit it on your IMPRESSA.
13.5 Cleaning the Professional Cappuccino Frother
To ensure that the Professional Cappuccino Frother (15) always
works properly, you should clean it daily when you have been
preparing milk foam or hot milk.
Your IMPRESSA will not prompt you to clean the Professional
Cappuccino Frother.
JURA Cappuccino Cleaner is available from stockists.
Ⅲ Place a receptacle under the Professional Cappuccino Frother (Fig. 9).
Ⅲ Fill a second receptacle with 2.5 dl of fresh water and add a capful
of JURA Cappuccino Cleaner.
Ⅲ Immerse the milk pipe in the second receptacle with the JURA Cap-
puccino Cleaner (Fig. 9).
Ⅲ READY
Ⅲ Press the steam preselection button (8).
Ⅲ HEATING
Ⅲ READY
