16
¼ Time
¼ Automatic switch-on time
¼ Automatic switch-off time
¼ Draw-offs
¼ Language
¼ Display
Programming key (4)
Use the programming key (4) to open or quit the
programming mode (no saving of values effected).
Rotary switch
Turn the Rotary Switch to change the adjusted values or to
select the next programming step.
Press the Rotary Switch to check the values adjusted or to
save the values selected
15.1 Programming the filter
Refer to Chapter 5.1 «Inserting the filter».
15.2 Programming the water hardness
Refer to Chapter 4 «Adjusting the water hardness».
15.3 Programming the aroma ROBUST
or STANDARD
When the machine leaves the factory, the aroma is set to
robust. If requested it can also be set to Standard.
Ⅲ READY
Ⅲ Press programming key (4) until
FILTER appears.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until Aroma is displayed.
Ⅲ AROMA
Ⅲ Press the Rotary Switch (1).
Ⅲ ROBUST
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
played:
Ⅲ STANDARD
Ⅲ To confirm the new aroma settings, press the Rotary Switch (1).
Ⅲ AROMA
Ⅲ Press the programming key (4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
Ⅲ READY
15.4 Programming the temperature
Ⅲ READY
Ⅲ Press programming key (4) until
FILTER appears.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until Temperature is displayed.
Ⅲ TEMPERATURE
Ⅲ Press the Rotary Switch (1).
Ⅲ HIGH
Ⅲ Turn the Rotary Switch (1) to change the temperature from
HIGH to NORMAL (or vice versa).
Ⅲ NORMAL
Ⅲ To confirm the new settings, press the Rotary Switch (1).
Ⅲ TEMPERATURE
