46
4 Permanent settings in programming mode
Example:Change the water hardness setting from
16°dH to 25°dH.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
HARDNESS
is displayed.
k T Press the Rotary Switch to enter the
programme item.
16°dH
g T Turn the Rotary Switch until 25°dH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the water hardness is set.
HARDNESS
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Energy-saving mode
The energy-saving mode (Energy Save Mode,
E.S.M.
©
) helps you to prevent your machine from
consuming power unnecessarily and to actively
save energy:
U
ENERGYp
U
Soon after the last preparation, the
IMPRESSA stops heating up. After about 5
minutes the message
ENERGY ON is
displayed.
U
Before you can prepare a speciality coffee,
speciality coffee with milk, or hot water, the
machine must heat up.
U
ENERGY-
U
The IMPRESSA is constantly ready for use.
U
All speciality coffees as well as hot water can
be prepared without having to wait.
Example:Change energy-saving mode from
ENERGYp to ENERGY-.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
ENERGYp is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ECONOMYp
g T Turn the Rotary Switch until ECONOMY-
is displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, energy-saving mode is set.
ENERGY-
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Automatic switch-off
By instructing your IMPRESSA to automatically
switch itself off, you can cut down your energy
consumption. If this function is activated, your
IMPRESSA switches off automatically after the
preset time following the last action on the
machine.
The automatic switch-off can be set to between
15minutes and 9hours.
Example:Change the switch-off time from
2HRS to 1HRS.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
OFF AFTER
is displayed.
k T Press the Rotary Switch to enter the
programme item.
2HRS
g T Turn the Rotary Switch until 1HRS is
displayed.
