468314
39
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
GIGA X7 Professionel Instructions for Use
JURA Type 677
Instructions for use has been awarded the seal of approval by the inde-
pendent German Technical Inspection Agency, TÜV SÜD, due to
its easy-to-understand style, its thoroughness and coverage of safety
aspects.
K
Original instructions for use
Before using the machine read the instructions for use.
E
2
Table of contents
Your GIGA X7 Professional
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety ...............................................................................................................................................6
1 Preparing and using for the first time 9
JURA on the Internet .....................................................................................................................................9
Settings by the JURA service technician ....................................................................................................9
Setting up the machine ...............................................................................................................................9
Filling the water tank ....................................................................................................................................9
Filling the bean container ...........................................................................................................................10
First-time use ................................................................................................................................................10
Determining the water hardness ..............................................................................................................14
Connecting milk ...........................................................................................................................................14
2 Preparation 15
Coffee, latte macchiato etc.– options for preparation .........................................................................15
Preparation at the touch of a button ........................................................................................................16
Preparation using the product selector ...................................................................................................17
Ground coffee ...............................................................................................................................................17
Permanently setting amounts for the cup size ......................................................................................18
Activating the grinder selection ................................................................................................................19
Hot water ......................................................................................................................................................20
3 Daily operation 21
Switching on .................................................................................................................................................21
Daily maintenance .......................................................................................................................................21
Switching off ................................................................................................................................................22
4 Permanent settings in programming mode 23
Possible settings in programming mode ...............................................................................................23
Product settings ..........................................................................................................................................24
Setting the consistency of grind ..............................................................................................................26
Maintenance settings .................................................................................................................................26
Setting the water hardness .......................................................................................................................28
Energy-saving mode ..................................................................................................................................28
Time and date ..............................................................................................................................................29
Timer .............................................................................................................................................................30
Automatic switch-off ...................................................................................................................................31
Units ..............................................................................................................................................................32
Restore factory settings .............................................................................................................................32
Language ......................................................................................................................................................33
Display settings ...........................................................................................................................................34
Background ..................................................................................................................................................34
Querying information ................................................................................................................................35
3
Table of contents
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention
to potential serious injury, and the signal word CAUTION to potential minor injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
T
Prompt to take action. This symbol means that you are being prompted to
perform some action.
E
Information and tips to make it even easier to use your GIGA.
‘Espresso Display
Symbol description
5 Maintenance 36
Rinsing the coffee system .........................................................................................................................36
Rinsing the milk system .............................................................................................................................37
Cleaning the milk system .......................................................................................................................... 37
Dismantling and rinsing the dual spout .................................................................................................38
Inserting and activating the filter ..............................................................................................................41
Changing the filter ......................................................................................................................................42
Cleaning the machine ................................................................................................................................42
Descaling the machine ..............................................................................................................................44
Cleaning the bean container .....................................................................................................................46
Descaling the water tank ...........................................................................................................................46
6 Display messages 47
7 Troubleshooting 49
8 Transport and environmentally friendly disposal 51
Transport/ Emptying the system ..............................................................................................................51
Disposal ..........................................................................................................................................................51
9 Technical data 52
10 Index 53
11 JURA contact details/ Legal information 56
4
Control elements
Control elements






1 Bean container with aroma
preservation cover
2 Bean container status indicator
3 Water tank cover
4 Water tank
5 Power switch and plug-in mains
cable (back of the machine)
6 Coffee grounds container
7 Drip tray
8 Cup grille
9 Filler funnel for ground coffee
10 Ventilation slats (Venti Ports)
11 Storage compartment cover
12 Measuring spoon for ground coffee
13 Height- and width-adjustable dual spout
14 Splash guard
15 Height-adjustable hot-water spout
5
Control elements
Top of the machine
1 Q On/Off button
2 g Rotary Switch
3 O P button (programming)
Front
4 Display
5 Multi-function buttons (button function
depends on what is shown in the display)
Back of the machine
1 Service cover (open by pressing with your
finger)
2 Locking device
3 Sliding catch
4 Service socket (underneath cover)
6
Important information
Important information
This machine is intended for use by specialist or trained staff in busi-
nesses, light industry and agricultural facilities or for commercial use
by non-professionals. It should only be used for coffee preparation
and to heat milk and water. Use for any other purpose will be
deemed improper. JURA Elektroapparate AG cannot accept any
responsibility for the consequences of improper use.
Before using the machine read these instructions for use thoroughly
and completely and comply with the instructions they contain. A
warranty service is not applicable for damage or defects caused by
non-compliance with the instructions for use. Keep these instruc-
tions for use close to the machine and pass them on to the next user.
The GIGA may only be operated by instructed persons. Non-profes-
sionals must be supervised during use.
Please carefully read and observe the important safety information
set out below.
To avoid danger of potentially fatal electric shock:
U
Never use a machine which is damaged or has a defective
mains cable.
U
In the event of signs of damage, for example if there is a smell
of burning, unplug the machine immediately from the mains
supply and contact JURA service.
U
If the mains cable of this machine is damaged, it must be
repaired either directly by JURA or by an authorised JURA
service centre.
U
Make sure that the GIGA and the mains cable are not located
close to hot surfaces.
U
Be careful to ensure that the mains cable is not trapped and
does not rub against sharp edges.
U
Never open and repair the machine yourself. Do not modify
the machine in any way that is not described in these instruc-
tions for use. The machine contains live parts. If opened, there
is a danger of potentially fatal injury. Repairs may only be car-
ried out by authorised JURA service centres, using original spare
parts and accessories.
Proper use
For your safety
J
7
Important information
U
To completely and safely disconnect the machine from the
power supply, first switch off the GIGA using the On/Off but-
ton and then at the power switch. Only then should you
remove the mains plug from the power socket.
There is a risk of scalds or burns on the spouts.
U
Place the machine out of the reach of children.
U
Do not touch any hot parts. Use the handles provided.
A defective machine is not safe and could cause injury or fire. To
avoid damage and any associated risk of injury or fire:
U
Never allow the mains cable to loosely hang down. The mains
cable could pose a tripping hazard or become damaged.
U
Protect the GIGA from environmental influences such as rain,
frost and direct sunlight.
U
Do not immerse the GIGA, mains cable or connections in water.
U
Do not put the GIGA or any individual parts in the dishwasher.
U
Switch your GIGA off at the power switch before any cleaning
operation. Always wipe the GIGA with a damp cloth rather
than a wet one, and protect it from prolonged exposure to
water splash.
U
The GIGA is not suitable for installation on a surface where a
jet of water can be used.
U
The machine must not be cleaned with a jet of water.
U
Only connect the machine to the mains voltage in accordance
with the information on the rating plate. The rating plate is
located on the underside of your GIGA. Further technical data
is provided in these instructions for use (see Chapter 9 ‘Tech-
nical data’).
U
Please only use original JURA maintenance products. Use of
products that are not explicitly recommended by JURA could
damage the GIGA.
U
Do not use any coffee beans treated with additives or caramel-
ised coffee beans.
U
Only fill the water tank with fresh, cold water.
U
Switch the machine off at the power switch if you are going to
be absent for a longer period of time.
8
Important information
People, including children, who
U
do not have the physical, sensory or mental capabilities to use
the machine safely or
U
are inexperienced or lack knowledge in how to use the
machine safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
Safety when handling the CLARIS Pro filter cartridge:
U
Filter cartridges should be kept out of the reach of children.
U
Store filter cartridges in a dry place in the sealed packaging.
U
Protect cartridges from heat and direct sunlight.
U
Do not use damaged filter cartridges.
U
Do not open filter cartridges.
9
1 Preparing and using for the first time
1 Preparing and using for the first time
Visit us on the Internet.
On the JURA website (www.jura.com) you will find interesting and
up-to-date information on your GIGA and on every aspect of coffee.
The following settings can only be made by the JURA service tech-
nician:
U
Customised layout of the products on the start screen (display)
or in the product selector
U
Disabling the product selector view (see Chapter 2 ‘Prepara-
tion – Preparation using the product selector’)
U
Setting the filter capacity
U
Code groups: Four code groups can be assigned. For every
code group, you can define which programme items are avail-
able or disabled. The relevant code groups correspond to dif-
ferent authorisations. For instance, you can define that initia-
tion of the maintenance programmes is disabled using a code.
You can also obtain the following optional accessories for your GIGA
from your JURA service partner:
U
Set for direct draining of the residual water
U
Set for automatic discharging of coffee grounds
When setting up your GIGA, please note the following:
U
Place the GIGA on a horizontal surface that is not sensitive to
water.
U
Choose a spot for your GIGA which protects the machine
against overheating. Ensure that the ventilation slats are not
covered.
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
JURA on the Internet
Settings by the JURA
service technician
Setting up the machine
Filling the water tank
CAUTION
10
1 Preparing and using for the first time
TOpen the water tank cover.
TRemove the water tank and rinse it with cold water.
TFill the water tank with fresh, cold water and reinsert the tank.
TClose the water tank cover.
The bean containers have an aroma preservation cover. This will
ensure that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinders.
T Only use untreated coffee beans to fill the bean containers.
TRemove the aroma preservation cover.
TRemove any dirt or foreign objects from inside the bean
container.
TFill the bean container with coffee beans and close the aroma
preservation cover.
During first-time use, you can choose between the
‘Quick installa-
tion’
and the ‘Standard installation’.
U
‘Quick installation’: After setting the time and date, your GIGA
is ready for use.
U
‘Standard installation’: Here, you can also decide whether you
want to operate your GIGA with or without a CLARIS Pro filter
cartridge. If the water hardness is 10°dH or more, we recom-
mend using the filter cartridge. If you do not know the hard-
ness of your water, you can find this out first (see Chapter 1
‘Preparing and using for the first time – Determining the
water hardness’).
U
‘Use filter’/ ‘Active: Here, you can fit the CLARIS Pro filter
cartridge. Descaling will no longer be necessary.
U
‘Use filter’/ ‘Inactive: Here, you can set the water hardness
of the water used. This setting influences when your GIGA
prompts you to perform descaling.
Filling the bean container
CAUTION
First-time use
11
1 Preparing and using for the first time
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition:The water tank and bean containers have been filled.
TConnect the mains cable to the machine.
TInsert the mains plug into a power socket.
3 TSwitch on the GIGA using the power switch on the back of
the machine.
Q TPress the On/Off button to switch the GIGA on.
‘Welcome to JURA’ appears on the display. The display then
shows the languages you can choose from.
E To display more languages, press the
‘Next’ button (bottom
right).
TPress the button that corresponds to the language you want,
e.g.
‘English’.
‘Saved appears briefly on the display to confirm the setting.
‘First-time use’
E Now choose between ‘Quick installation’ and ‘Standard instal-
lation’
.
T Press the
‘Quick installation’ button.
‘Time’
T Press the ‘+’ or ‘–’ button to set the hours.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the minutes.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Date’
T Press the ‘+’ or ‘–’ button to set the day.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the month.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the year.
T Press the
‘Save’ button.
J
WARNING
Quick installation
12
1 Preparing and using for the first time
‘Saved appears briefly on the display.
‘Press the Rotary Switch., the Rotary Switch lights up.
TPlace a receptacle under the dual spout.
k TPress the Rotary Switch.
‘System is filling., the system fills up with water. The opera-
tion stops automatically.
‘Welcome to JURA’, ‘Machine is
heating.
, ‘Press the Rotary Switch. appears on the display.
k TPress the Rotary Switch.
‘Machine is rinsing., the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display. Your GIGA is ready for use.
T Press the
‘Standard installation’ button.
‘Time’
T Press the ‘+’ or ‘–’ button to set the hours.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the minutes.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Date’
T Press the ‘+’ or ‘–’ button to set the day.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the month.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the year.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Use filter’
E Now decide whether you want to operate your GIGA with or
without a CLARIS Pro filter cartridge.
T Press the
‘Active button.
T Press the
‘Save’ button.
‘Press the Rotary Switch., the Rotary Switch lights up.
k TPress the Rotary Switch.
‘System is filling., the system fills up with water. The opera-
tion stops automatically.
‘Insert filter.’/ ‘Press the Rotary Switch.
Standard installation
Activating the filter
13
1 Preparing and using for the first time
TRemove and empty the water tank.
TOpen the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
TClose the filter holder. It will click into place audibly.
TFill the water tank with fresh, cold water and reinsert the tank.
k TPress the Rotary Switch.
‘Filter is being rinsed., the filter is rinsed. Rinsing of the filter
stops automatically.
‘Empty drip tray. appears on the dis-
play.
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
‘Filter’/ ‘Filter rinsing complete.’
‘Welcome to JURA’
, ‘Machine is heating., ‘Press the Rotary
Switch.
.
k TPress the Rotary Switch.
‘Machine is rinsing., the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display. Your GIGA is ready for use.
T Press the
‘Inactive’ button.
T Press the
‘Save’ button.
‘Press the Rotary Switch., the Rotary Switch lights up.
k TPress the Rotary Switch.
‘System is filling., the system fills up with water. The opera-
tion stops automatically.
‘Water hardness
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Press the
‘+’ or ‘–’ button to adjust the water hardness.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Welcome to JURA’, ‘Machine is heating., ‘Press the Rotary
Switch.
.
Deactivating the filter
14
1 Preparing and using for the first time
TPlace a receptacle under the dual spout.
k TPress the Rotary Switch.
‘Machine is rinsing., the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display. Your GIGA is ready for use.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
THold the test strip briefly (for 1second) under flowing water.
Shake off the water.
TWait for about 1minute.
TYou will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
Your GIGA creates fine, creamy, feather-light milk foam with a per-
fect consistency. The most important requirement for frothing milk
is a milk temperature of 4 – 8°C. We would therefore recommend
using a milk cooler (e.g. the JURA Compressor Cooler Pro, which is
available as an option).
TConnect the milk pipe to the dual spout.To do this, attach
the end of the milk pipe to the connector on the right-hand
side of the dual spout.
TConnect the other end of the milk pipe to a milk cooler.
Determining the water
hardness
Connecting milk
15
2 Preparation
2 Preparation
E While a product is being prepared, you can stop preparation
at any time. To do this, press the Rotary Switch k or the
button.
E During preparation, you can change the preset amounts
(e.g. amount of milk foam or water) by turning the Rotary
Switch g.
E You can follow the current status of preparation on the display.
Coffee tastes best served hot. A cold porcelain cup cools the
beverage – and impairs the taste. We therefore recommend pre-
warming the cups. The full coffee aroma can develop only in pre-
warmed cups. You can purchase a JURA cup warmer from your spe-
cialised dealer.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Product settings’).
The GIGA provides you with two options for preparing a speciality
coffee, milk or hot water.
U
Preparation at the touch of a button: Simply press the cor-
responding preparation button for the product shown on the
display (start screen) that you want.
U
Preparation using the product selector (Rotary Selection):
Only some of the products you can prepare are shown on the
start screen. As soon as you turn the Rotary Switch, more
products are displayed in a product selector.
U
Turn the Rotary Switch to bring the product you want into
focus. Start preparation by pressing the Rotary Switch or the
‘Prepare’ button.
U
The product selector view disappears automatically after
5seconds if no preparation is started.
The two preparation options will now be described in more detail in
the following sections.
Coffee, latte macchiato
etc.– options for
preparation
16
2 Preparation
On the display (start screen), you will see eight different products,
which you can prepare by simply pressing the corresponding button.
A speciality coffee displayed on the start screen is always prepared
in the same way.
Example:Proceed as follows to prepare one coffee.
Precondition:
‘Please select product:’ is displayed.
TPlace a cup under the dual spout.
T Press the
‘Coffee’ button.
Preparation starts.
‘Coffee’ and the fill volume are displayed.
The preset amount of water for coffee flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Two speciality coffees can always be prepared in the same way: Press
the preparation button you want twice within two seconds.
Your GIGA prepares latte macchiato, cappuccino and other speciality
coffees with milk at the touch of a button. There is no need to move
the glass or cup.
Example:Proceed as follows to prepare one latte macchiato.
Precondition:
‘Please select product:’ is displayed, milk is connected
to the dual spout.
TPlace a glass under the dual spout.
T Press the
‘Latte macchiato button.
‘Latte macchiato and the various amounts are displayed.
‘Latte macchiato, the preset amounts of milk and milk foam
flow into the glass.
Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati-
cally.
‘Please select product:’ appears on the display.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily (see Chapter 5 ‘Maintenance – Cleaning
the milk system’).
Preparation at the touch
of a button
Speciality coffees at the
touch of a button
Two speciality coffees at the
touch of a button
Speciality coffees with milk
at the touch of a button
17
2 Preparation
As soon as you turn the Rotary Switch, more products are displayed
in a product selector.
E The product selector view disappears automatically after
5seconds if no preparation is started.
Example:Proceed as follows to prepare a milky coffee using the
product selector.
Precondition:
‘Please select product:’ is displayed, milk is connected
to the dual spout.
TPlace a cup under the dual spout.
g TTurn the Rotary Switch to view the product selector.
g TTurn the Rotary Switch until the
‘Caffè latte’ product is in
focus.
k TPress the Rotary Switch to start preparation.
The milky coffee is prepared.
Preparation stops automatically.
‘Please select product:’
appears on the display.
You can choose to use a second coffee variety, for example decaf-
feinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
E If you did not fill the machine with a sufficient amount of
ground coffee,
‘Not enough ground coffee.’ is displayed and
the GIGA stops the operation.
E The desired speciality coffee must be prepared within approx-
imately one minute after filling with the ground coffee. Oth-
erwise the GIGA stops the operation and is once more ready
for use.
All speciality coffees with ground coffee are prepared following this
model.
Preparation using the
product selector
Preparation of a speciality
coffee using the product
selector
Ground coffee
18
2 Preparation
Example:Proceed as follows to prepare one coffee using ground
coffee.
Precondition:
‘Please select product:’ is displayed.
TPlace a cup under the dual spout.
TOpen the cover of the filler funnel for ground coffee.
‘Please add ground coffee.’
TPlace one level measuring spoon of ground coffee into the
filler funnel.
TClose the cover of the filler funnel.
‘Please select product:’, the speciality coffees you can prepare
with ground coffee are displayed.
T Press the
‘Coffee’ button.
Preparation starts.
‘Coffee’ and the fill volume are displayed.
The preset amount of water for coffee flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
It is easy to make permanent settings for the amounts (amount of
water, amount of milk etc.) for all products according to the cup size.
Adjust the amount once as shown in the following example. Every
time you prepare a drink in the future, this amount of water will be
dispensed.
The permanent settings for adapting the amounts to the cup size
for all products (apart from caffè latte) follow this model.
Example:Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:
‘Please select product:’ is displayed.
TPlace a cup under the dual spout.
T Press and hold the
‘Coffee’ button.
‘Coffee’ and the fill volume are displayed.
THold the
‘Coffee’ button down until ‘Enough coffee? Press
button.
appears.
T Release the
‘Coffee’ button.
Preparation starts and the coffee flows into the cup.
Permanently setting
amounts for the cup size
19
2 Preparation
TPress any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
‘Saved appears briefly on the display. The
set amount of water for one coffee is permanently stored.
‘Please select product:’ appears on the display.
E You can alter this setting at any time by repeating the above
procedure.
E The amount can be permanently adjusted to the cup size for
the products shown in the product selector too. To do this,
press and hold the Rotary Switch k until
‘Enough coffee?
Press button.
appears.
E You can also permanently set the amount for all speciality cof-
fees, milk and hot water in programming mode (see Chapter 4
‘Permanent settings in programming mode – Product set-
tings’).
You have the option of configuring the start screen such that the
grinder selection (‘beans à la carte’) is always displayed. Before each
preparation, you can select which grinder is to be used and therefore
which coffee beans are to be used.
E If the grinder selection is activated, you can no longer set the
grinder for the individual products in programming mode (in
the
‘Product settings (2/5)’ programme item).
Example:Proceed as follows to activate ‘beans à la carte’ mode.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (4/5)’
is displayed.
T Press the
‘Café à la carte’ button.
T Press the
‘Active button.
T Press the
‘Saved button.
‘Saved appears briefly on the display.
‘Machine settings (4/5)’
O TPress the P button to exit programming mode.
‘Please select product:’
Activating the grinder
selection
20
2 Preparation
Example:Proceed as follows to prepare a coffee with coffee beans
from the grinder on the left.
Precondition:‘Please select product:’ is displayed. ‘Beans à la carte’
mode is activated.
TPlace a cup under the dual spout.
T Press the
‘+’ button on the left-hand side several times until
the value is set to ‘100%’.
E The grinder selection remains active until the setting is
changed by you, even if the GIGA is switched off in the mean-
time.
T Press the
‘Coffee’ button.
Preparation starts.
‘Coffee’ and the fill volume are displayed.
The preset amount of water for coffee flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
The following temperatures can be selected for preparing hot water:
‘Low’, ‘Normal’, ‘High.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
Precondition:
‘Please select product:’ is displayed.
TPlace a cup under the hot-water spout.
T Press the
‘Hot water’ button.
‘Hot water’ and the temperature are displayed.
E By pressing the
‘+’ or ‘–’ button (within approximately
2 seconds) you can set the temperature to your individual
preference. This setting is not saved.
‘Hot water’, hot water flows into the cup. Preparation stops
automatically when the preset amount of water is reached.
‘Please select product:’ appears on the display.
Preparation of a speciality
coffee with grinder
selection
Hot water
J
CAUTION
21
3 Daily operation
3 Daily operation
When the GIGA is switched on, it automatically prompts you to per-
form the rinse operation. Start the rinse operation by pressing the
Rotary Switchk. In programming mode you can change this setting
so that the machine starts the switch-on rinse automatically (see
Chapter 4 ‘Permanent settings in programming mode – Mainte-
nance settings’).
Precondition:Your GIGA is switched on at the power switch.
TPlace a receptacle under the dual spout.
Q TPress the On/Off button to switch the GIGA on.
‘Welcome to JURA’ appears on the display. The machine
heats up.
‘Press the Rotary Switch.
k TPress the Rotary Switch.
‘Machine is rinsing., the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display.
To ensure that you get many years of reliable service out of your
GIGA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
TPull out the drip tray.
TEmpty the coffee grounds container and the drip tray. Rinse
them both with warm water.
TDry the metal contacts on the back of the drip tray.
TRefit the coffee grounds container and the drip tray.
TRinse the water tank with clean water.
TDismantle and rinse the dual spout (see Chapter 5 ‘Mainte-
nance – Dismantling and rinsing the dual spout’).
TWipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
E In the interests of hygiene, we recommend changing the milk
pipe on a regular basis (approx. every 6 months). Replacement
pipes are available from specialised dealers.
Switching on
Daily maintenance
22
3 Daily operation
When you switch off your GIGA, the dual spout is rinsed automati-
cally.
Precondition:
‘Please select product:’ is displayed.
TPlace a receptacle under the dual spout.
Q TPress the On/Off button.
‘Machine is rinsing., ‘Milk system is being rinsed. (if you
have prepared a speciality coffee with milk). The system
rinses itself. The operation stops automatically. Your GIGA is
switched off.
E When the GIGA is switched off with the On/Off button, the
machine consumes less than 0.1W of standby energy. The
machine can be completely disconnected from the power
supply using the power switch.
Switching off
23
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the multi-
function buttons. The following settings can be made:
Programme item Sub-item Explanation
‘Maintenance status (1/5)’ ‘Clean,
‘Change the filter’,
‘Descale’ (only if filter is
not activated),
‘Rinse the milk system’,
‘Rinse the coffee system,
‘Clean the milk system
T Start the required maintenance
programme here.
‘Product settings (2/5)’ ‘Expert mode’,
‘Set consistency of grind’
T Select your settings for speciality coffees,
milk and hot water.
T Adjust the consistency of grind for both
grinders to the coffee beans used.
‘Machine settings (3/5)’ ‘Maintenance settings
(filter, water hardness,
switch-on rinse, milk
system rinsing),
‘Time/ date’,
‘Timer’,
‘Save energy’,
‘Units,
‘Factory setting’
T Set the water hardness or activate the
filter.
T Change the settings for the switch-on
rinse and milk system rinse.
T Set the time after which the GIGA should
switch off automatically.
T Select an energy-saving mode.
T Select the unit for the amount of water.
T Reset the machine or the permanently
set values of all products to the factory
settings.
‘Machine settings (4/5)’ Choose language’,
‘Display’,
‘Colour scheme,
‘Café à la carte’
T Select your language.
T Change the display settings.
T Activate the grinder selection.
‘Information (5/5)’ ‘Product counter’,
‘Day counter’,
‘Maintenance counter’,
‘Version’
T Keep track of all products prepared and
view the number of maintenance
programmes performed.
Possible settings in
programming mode
24
4 Permanent settings in programming mode
In the programme item ‘Product settings (2/5)’ you can make indi-
vidual settings for all speciality coffees, milk and hot water.
The following settings can be made in the
‘Expert mode’:
Product Coffee strength Amount More settings
Ristretto,
espresso,
coffee
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 25ml–240ml Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Two ristretti,
two espressi,
two coffees
Water: 25ml–240ml
(per cup)
Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Cappuccino,
caffè latte,
espresso mac-
chiato,
latte macchiato
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 25ml–240ml
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Two cappuccini,
two caffè lattes,
two espressi
macchiati,
two latte macchiati
Water: 25ml–240ml
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
(per cup)
Temperature (low, normal,
high),
grinder on the left and/or
right (as%)
Portion of milk
foam,
portion of milk
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
Two portions of
milk foam,
two portions of
milk
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
(per cup)
Pot
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
Water: 25ml–240ml
(per stroke)
Temperature (low, normal,
high),
grinder on the left and/or
right (as%),
number of strokes (1 – 5;
set number is displayed
during preparation)
Product settings
Expert mode
25
4 Permanent settings in programming mode
Product Coffee strength Amount More settings
Hot water Water: 25ml–450ml Temperature (low, normal,
high)
E In addition to the settings listed, you can reset the values for
all products to the factory settings.
Example:Proceed as follows in the
‘Expert mode’ to change the
amount of milk for a latte macchiato from
‘4sec. to ‘6sec., the
amount of milk foam from
‘12sec.’ to ‘14sec.’ and the amount of
water from
‘45ml’ to ‘40ml’.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Product
settings (2/5)’
is displayed.
T Press the
‘Expert mode’ button.
‘Expert mode’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T Press the
‘Latte macchiato button.
T Press the
Amount of milk’ button.
T Press the
‘+’ or ‘–’ button to change setting for the amount
of milk to
‘6sec..
T Press the
‘Save’ button.
T Press the
Amount of milk foam’ button.
T Press the
‘+’ or ‘–’ button to change setting for the amount
of milk foam to
‘14sec..
T Press the
‘Save’ button.
T Press the
‘Volume’ button.
T Press the
‘+’ or ‘–’ button to change setting for the fill vol-
ume to
‘40ml’.
T Press the
‘Save’ button.
O TPress the P button to exit programming mode.
‘Please select product:’
26
4 Permanent settings in programming mode
In the programme item ‘Product settings (2/5)’/ ‘Set consistency of
grind’
you can adjust both grinders separately to the degree of roast
of your coffee.
The consistency of grind setting is correct if the coffee flows regu-
larly from the dual spout. In addition a fine, thick crema forms.
Example:Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Product
settings (2/5)’
is displayed.
T Press the
‘Set consistency of grind’ button.
‘Set consistency of grind’
T Press the ‘Right grinder’ button.
‘Right grinder’
T Press the ‘+’ or ‘–’ button to change the setting for the con-
sistency of grind.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Set consistency of grind’
O TPress the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’/ ‘Maintenance set-
tings’
you can make the following settings:
U
‘Filter’
U
Activate the CLARIS Pro filter cartridge (see Chapter 5 ‘Main-
tenance – Inserting and activating the filter’).
U
‘Water hardness
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Setting the water hardness’).
U
‘Switch-on rinse’/ ‘Manual’
U
The switch-on rinse must be started manually.
U
‘Switch-on rinse’/ Automatic’
U
The switch-on rinse is started automatically.
Setting the consistency
of grind
Maintenance settings
27
4 Permanent settings in programming mode
U
‘Rinse the milk system’/ ‘Manual after 10min.
U
You are prompted to rinse the milk system 10minutes after
preparation of a speciality coffee with milk.
U
‘Rinse the milk system’/ ‘Manual immediate
U
You are prompted to rinse the milk system immediately
after preparation of a speciality coffee with milk.
U
‘Rinse the milk system’/ Automatic after 10min.
U
Milk system rinsing is automatically initiated 10 minutes
after preparation of a speciality coffee with milk.
U
‘Rinse the milk system’/ Automatic immediate’
U
Milk system rinsing is automatically initiated approx. 30 sec-
onds after preparation of a speciality coffee with milk.
Example:Proceed as follows to make the machine prompt you to
rinse the milk system immediately after preparing a speciality cof-
fee with milk.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Maintenance settings button.
‘Maintenance settings
T Press the ‘Rinse the milk system’ button.
‘Rinse the milk system’
T Press the ‘Manual immediate’ button.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Maintenance settings
O TPress the P button to exit programming mode.
‘Please select product:’
28
4 Permanent settings in programming mode
The harder the water is, the more frequently the GIGA needs to be
descaled. It is therefore important to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Maintenance settings button.
‘Maintenance settings
T Press the ‘Water hardness’ button.
‘Water hardness
T Press the ‘+’ or ‘–’ button to set the water hardness.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Maintenance settings
O TPress the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’/ ‘Save energy’ you
can permanently set an energy-saving mode (Energy Save Mode,
E.S.M.
©
):
U
‘Save No
U
All speciality coffees, speciality coffees with milk and hot water
can be prepared without having to wait.
U
‘Save Level1’
U
Your GIGA is only constantly ready for use for speciality cof-
fees and hot water.
U
Before you can prepare a speciality coffee with milk, the
machine must heat up.
U
‘Save Level2’
U
Soon after the last preparation, the GIGA stops heating up.
After about 5 minutes the message
‘Energy Save is displayed.
U
Before you can prepare a speciality coffee, speciality coffee
with milk, or hot water, the machine must heat up.
Setting the water
hardness
Energy-saving mode
29
4 Permanent settings in programming mode
Example:Proceed as follows to change the energy-saving mode
from
‘Save Level1’ to ‘Save Level2’.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Save energy’ button.
‘Save energy’
T Press the ‘Save Level2’ button.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Machine settings (3/5)’
O TPress the P button to exit programming mode.
‘Please select product:’
You already set the time and date during first-time use. You can
change this setting.
E For the time format, you can choose between ‘24hrs’ and
AM/ PM’ (see Chapter 4 ‘Permanent settings in programming
mode – Units’).
Example:Proceed as follows to change the time.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Time/ date’ button.
‘Time/ date’
T Press the ‘Time’ button.
‘Time’
T Press the ‘+’ or ‘–’ button to set the hours.
T Press the
‘Save’ button.
T Press the
‘+’ or ‘–’ button to set the minutes.
Time and date
30
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved appears briefly on the display.
‘Time/ date’
O TPress the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’/ ‘Timer’ you can set
an individual switch-on and switch-off time for every day of the week.
E Automatic switch-on only works when the machine is switched
on at the power switch.
E For the time format, you can choose between ‘24hrs’ and
AM/ PM’ (see Chapter 4 ‘Permanent settings in programming
mode – Units’).
Example:Proceed as follows to set your GIGA to switch on and off
at a time defined by you every day of the week.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Timer’ button.
‘Timer’
T Press the ‘Monday’ button (example).
‘Monday’
T Press the ‘+’ or ‘–’ button to set the hours (for ‘Switch
machine on’
).
T Press the
button.
T Press the
‘+’ or ‘–’ button to set the minutes (for ‘Switch
machine on’
).
T Press the
button.
T Press the
‘+’ or ‘–’ button to set the hours (for ‘Switch
machine off’
).
T Press the
button.
T Press the
‘+’ or ‘–’ button to set the minutes (for ‘Switch
machine off’
).
Timer
31
4 Permanent settings in programming mode
T Press the ‘Every weekday’ button.
‘Saved appears briefly on the display. The switch-on and
switch-off times you just set are adopted for every day of the
week.
‘Timer’
O TPress the P button to exit programming mode.
‘Please select product:’
By instructing your GIGA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your GIGA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off time to 15minutes or
0.5 – 15 hours.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Timer’ button.
T Press the
‘Next’ button.
T Press the
‘Switch off after’ button.
‘Switch off after’
T Press the ‘+’ or ‘–’ button to change the setting.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Timer’
O TPress the P button to exit programming mode.
‘Please select product:’
Automatic switch-off
32
4 Permanent settings in programming mode
In the programme item ‘Machine settings (3/5)’/ ‘Units’ you can
make the following settings:
U
Unit for amount of water: ‘ml’ or ‘oz’
U
Time format: ‘24hrs. or AM/ PM’
Example:Proceed as follows to change the unit for the amount of
water from
‘ml’ to ‘oz’.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Units button.
‘Units
T Press the ‘oz’ button.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Machine settings (3/5)’
O TPress the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings (3/5)’/ ‘Factory setting’
you can reset various settings to their factory settings:
U
All products’
U
The settings (amount of water, coffee strength, temperature
etc.) for all products are reset to the factory settings.
U
‘Machine’
U
All user settings (apart from the ‘filter’, ‘water hardness’ and
time and date settings) are reset to the factory settings. The
GIGA then switches off.
U
‘Empty system’
U
The system is emptied. Your GIGA then switches off.
Example:Proceed as follows to reset the values for all products to
the factory settings.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
Units
Restore factory settings
33
4 Permanent settings in programming mode
g TTurn the Rotary Switch until the programme item ‘Machine
settings (3/5)’
is displayed.
T Press the
‘Factory setting’ button.
‘Factory setting’
T Press the All products’ button.
All products’/ ‘Reset all products to the factory settings?’
T Press the ‘Yes’ button.
‘Saved appears briefly on the display.
‘Factory setting’
O TPress the P button to exit programming mode.
‘Please select product:’
In this programme item you can set the language used by your
GIGA.
Example:Proceed as follows to change the language from
‘English’
to
‘Deutsch’.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (4/5)’
is displayed.
T Press the
‘Choose language button.
‘Choose language
E To display more languages, press the ‘Next’ button (bottom
right).
T Press the
‘Deutsch’ button.
‘Gespeichert’ appears briefly on the display.
‘Geräteeinstellungen (4/5)’
O TPress the P button to exit programming mode.
‘Bitte wählen Sie Ihr Produkt:’
Language
34
4 Permanent settings in programming mode
In the programme item ‘Machine settings (4/5)’/ ‘Display’ you can
make the following settings:
U
‘Brightness’ (as percentages)
U
‘Contrast’ (high, normal, low)
U
‘Backlight’ (backlighting; as percentages)
Example:Proceed as follows to change the brightness of the display.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (4/5)’
is displayed.
T Press the
‘Display’ button.
‘Display’
T Press the ‘Brightness button.
T Press the
‘+’ or ‘–’ button to change the setting.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Display’
O TPress the P button to exit programming mode.
‘Please select product:’
In this programme item you can set the background for the display
of your GIGA.
E The set background is only displayed on the start screen.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Machine
settings (4/5)’
is displayed.
T Press the
‘Colour scheme button.
‘Colour scheme
T Press the ‘+’ or ‘–’ button to change the setting.
T Press the
‘Save’ button.
‘Saved appears briefly on the display.
‘Machine settings (4/5)’
O TPress the P button to exit programming mode.
‘Please select product:’
Display settings
Background
35
4 Permanent settings in programming mode
In the programme item ‘Information (5/5)’ you can view the follow-
ing information:
U
‘Product counter’: Number of prepared coffee speciality cof-
fees, speciality coffees with milk and hot water
U
‘Day counter’: Number of prepared coffee speciality coffees,
speciality coffees with milk and hot water. This counter can be
reset to zero.
U
‘Maintenance counter’: Number of maintenance programmes
performed (cleaning, descaling etc.)
U
‘Version’: Software version
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
g TTurn the Rotary Switch until the programme item ‘Informa-
tion (5/5)’
is displayed.
T Press the
‘Product counter’ button.
‘Product counter’ and the number of products prepared is
displayed.
E You can also view the number of products prepared in the
product selector. To do this, turn the Rotary Switch.
TPress any button or the Rotary Switch to exit the programme
item.
‘Information (5/5)’
O TPress the P button to exit programming mode.
‘Please select product:’
Querying information
36
5 Maintenance
5 Maintenance
Your GIGA has the following integrated maintenance programmes:
U
Rinsing the coffee system (‘Rinse the coffee system)
U
Rinsing the milk system in the dual spout (‘Rinse the milk
system’
)
U
Cleaning the milk system in the dual spout (‘Clean the milk
system’
)
U
Changing the filter (‘Change the filter’)
U
Cleaning the machine (‘Clean’)
U
Descaling the machine (‘Descale’) (only if filter is not activated)
E Clean or descale the machine, rinse the milk system or change
the filter when you are prompted to do so.
E Press the P button to view a list of the maintenance pro-
grammes (
‘Maintenance status (1/5)’). By referring to the bar
you can see how soon each maintenance programme is due.
When the bar is completely filled with red, your GIGA will
prompt you to perform the maintenance programme.
E The GIGA will not prompt you to clean the milk system. In the
interests of hygiene, you should clean the milk system daily
when you have been preparing milk.
You can perform coffee system rinsing at any time.
Precondition:
‘Please select product:’ is displayed.
TPlace a receptacle under the dual spout.
O TPress the P button.
‘Maintenance status (1/5)’
T Press the ‘Rinse the coffee system button.
‘Machine is rinsing., water flows out of the dual spout.
The rinse stops automatically.
‘Please select product:’ appears
on the display.
Rinsing the coffee system
37
5 Maintenance
Depending on the setting in programming mode, the GIGA prompts
you to rinse the milk system or automatically performs rinsing fol-
lowing milk preparation.
Example:Proceed as follows to rinse the milk system when prompted
to do so.
Precondition:
‘Rinse the milk system. and the c symbol are dis-
played.
TPlace a receptacle under the dual spout.
O TPress the P button.
‘Maintenance status (1/5)’
T Press the ‘Rinse the milk system’ button.
‘Milk system is being rinsed., water flows out of the dual
spout.
The rinse stops automatically.
‘Please select product:’ appears
on the display.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily when you have been preparing milk. The
GIGA will not prompt you to clean the milk system.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA Cappuccino Cleaner is available from specialised dealers.
Precondition:
‘Please select product:’ is displayed.
O TPress the P button.
‘Maintenance status (1/5)’
T Press the ‘Clean the milk system button.
T Press the
‘Start’ button.
T Press the
‘Start’ button again.
‘Cleaning agent for milk system.
TPour 250ml of fresh water into a receptacle and add one
capful (max. 15ml) of Cappuccino Cleaner.
TImmerse the milk pipe in the receptacle.
Rinsing the milk system
Cleaning the milk system
CAUTION
38
5 Maintenance
TPlace another receptacle under the dual spout.
T Press the
‘Next’ button.
‘Milk system is being cleaned., water flows out of the dual
spout.
‘Water for cleaning milk system.
TRinse the receptacle thoroughly, fill it with 250ml of fresh
water and immerse the milk pipe in the water.
TEmpty the other receptacle and place it under the dual spout
again.
T Press the
‘Next’ button.
‘Milk system is being cleaned., the dual spout and the pipe
are rinsed with fresh water.
The operation stops automatically.
‘Milk system cleaning
complete.’
appears briefly on the display.
‘Please select product:’
The dual spout must be dismantled and rinsed daily if milk has been
prepared to make sure it functions perfectly and also in the interests
of hygiene.
TRemove the milk pipe and rinse it thoroughly under running
water.
TPress the releasing devices and pull the cover of the dual
spout up and off.
Dismantling and rinsing
the dual spout
39
5 Maintenance
TCarefully pull the bottom part of the milk system down and
off.
TRemove the milk system from the dual spout.
TRemove the air intake pipe.
TDismantle the milk system into its individual parts.
TRinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts in
JURA Cappuccino Cleaner and then rinse them thoroughly.
TReassemble the milk system. When doing this, note the
arrows (circled in red in the picture) on the individual parts.
39

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jura GIGA X7 Professional bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jura GIGA X7 Professional in de taal/talen: Engels als bijlage per email.

De handleiding is 7,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Jura GIGA X7 Professional

Jura GIGA X7 Professional Aanvulling / aanpassing - Nederlands - 2 pagina's

Jura GIGA X7 Professional Gebruiksaanwijzing - Nederlands - 60 pagina's

Jura GIGA X7 Professional Aanvulling / aanpassing - Deutsch - 2 pagina's

Jura GIGA X7 Professional Gebruiksaanwijzing - Deutsch - 60 pagina's

Jura GIGA X7 Professional Aanvulling / aanpassing - English - 2 pagina's

Jura GIGA X7 Professional Aanvulling / aanpassing - Français - 4 pagina's

Jura GIGA X7 Professional Gebruiksaanwijzing - Français - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info