3130
15. Adjusting the contrast of the digital display
To ensure that the digital display is as clear as possible, your Mega 1000
has a function that allows you to manually change the contrast of the
display. If the contrast needs to be adjusted, proceed as follows:
First check whether your Mega 1000 is in one of the 5 time display
modes. If this is not the case, press the T3 button until the current time
is shown in the display.
Now press the T1 and T2 buttons at the same time for more than 8
seconds. The tag ”CON 2” appears in the display. The contrast can now
be changed using the T1 (set+) and T2 (set-) buttons.
To set the contrast to the maximum level, press the T1 button until
”CON 15” is displayed.
To set the contrast to the minimum level, press the T2 button until
”CON 0” is displayed.
After you have set the desired contrast level, press the T4 button to
return to the normal display.
16. Adjusting the wristband
Depending on the model your Junghans Mega 1000 will either be
equipped with a leather wristband with buckle or a metal wristband
with foldover clasp.
Stainless steel wristbands should ideally be adjusted by a specialist
watch retailer or the Junghans Service Center.
14. Button lock
To prevent unintentional adjustment of the display, your Mega 1000
has a function that allows you to lock the operating buttons. This
function is available in every time display mode (see chapter 4.1.).
Proceed as follows to activate or deactivate the button lock:
Press the T5 button for more than 4
seconds. The CHRONO, TIMER and
ALARM symbols disappear from the
display. The button lock is now activated.
To deactivate, repeat the same procedure.
If a button is pressed when the button
lock is active, the symbol ”Lo” for Lock
appears in the display.
