614555
46
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
– 44 –
1) Turn ON the power switch with switch
and switch held pressed.
2) "KL.on" is displayed on indicator A with a blip to
make the key-lock function effective.
3) The panel returns to the normal operation after
displaying "KL.on" on the indicators.
4) While the key lock function is effective, "KL.on"
is displayed on the indicators when turning the
power ON.
5) When you carry out steps 1) to 3) in repetition, "KL.of" is displayed when turning the power ON and the
key lock function is rendered ineffective.
• "KL.on" display when turning the power ON
Display appears: The key lock function is effective.
Display does not appear: The key lock function is ineffective.
In the case the key lock function is effective, the operation of the panel will be as shown in the table below.
Switch operation of which is to be dis-
abled.
Setting of the reverse feed stitching (, , and )
Change of the sewing pattern (, , and )
Change of the number of stitches ()
Change of the sewing operation (󱀔, 󱀕, 󱀖 and 󱀗)
Switch operation of which is not to be
disabled.
Compensating stitching in half-stitch steps (󱀓)
Production support function ()
13. Selecting procedure of the key-lock function
Setting of the number of stitches for a pattern can be prohibited by enabling the key lock function.
Display section A
1) Referring to the explanation of "III-6. Setting of
functions" p.25, select function setting "n.95".
Then, press switch 󱀙.
2) Press and hold switch 󱀔.
3) The buzzer sounds after approximately one sec-
ond, and the setting data returns to the standard
setting value.
Do not turn OFF the power on the way
of initializing operation. Program of the
main unit may be broken.
4) Turn OFF the power switch and turn ON the power switch after closing the front cover. The machine re-
turns to the normal motion.
1. When you carry out the aforementioned operation, the neutral position correction value for
the pedal sensor is also initialized. It is therefore necessary to carry out automatic correc-
tion of the pedal sensor neutral position before using the sewing machine. (Refer "III-10.
Automatic compensation of neutral point of the pedal sensor" p.42.)
2. When you carry out the aforementioned operation, the machine-head adjustment values
and the function settings of the optional devices are also initialized. It is therefore neces-
sary to carry out adjustment of the machine head before using the sewing machine. (Refer
"IV-1. Adjusting the machine head" p.46.)
3. Even when this operation is performed, the sewing data set by the operation panel cannot
be initialized.
14. Initialization of the setting data
All contents of function setting can be returned to the standard set values.
󱀙
󱀔
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Juki DDL8700B-7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Juki DDL8700B-7 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info