626531
4
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
enjoy motors ®
JE 50 RA 916 radio motor is a product from Jolly Motor España, s.l. www.enjoy-motors.com 4
JE50RA-916-STEEL_eng_ver. REM 2 & REM 2T
9-1 REPLACEMENT THE FIRST EMITTER (Main emitter) through the Switch Power Off/On
switch
OFF/ON
BIP
2
’’
seconds
2
minutes
4
enjoy
Switch power OFF, in the motor which we
want replace the MAIN transmitetr.
After 5 seconds, switch power ON
Between 2 seconds and 2 minutes (and
six seconds) after the power ON, the motor
willmakeasingletiltmovementasconr-
mation that it is ready to learn a new Main
On the new Main Emitter:
Press FOUR times the P3 button (located
on the back of the emitter)
Then the motor will make two tilt movement
asconrmationthatthenewMainemitter
has been learned
During the replacement process:
• Any order send by a transmitter will stopped the replacement process (even if the order is coming from a transmitter not learned with the motor. It is enought with the same
frequency).
When we replace the MAIN transmitter:
• Old main transmitters doesn’t work with the motor.
• Old transmitters copied on the motor, remain working on the motor
• The limit switches set up remain memorized on the motor.
9-2 REPLACEMENT THE FIRST EMITTER (Main emitter) through the Switch Power Off/On, if in the motor has not been seted up the limit switches
switch
OFF/ON
BIP
BIP
BIP
BIP
BIP
BIP
BIP
1
switch
OFF/ON
BIP
2
’’
seconds
2
minutes
4
Switch power OFF, in
the motor which we
want replace the MAIN
transmitter.
After 5 seconds, switch
power ON Motor will emit
till SEVEN BIPs
On the new Main Emitter:
Press ONE time the P3
button (located on the
back of the emitter)
Switch power OFF, in
the motor which we
want replace the MAIN
transmitter.
After 5 seconds, switch
power ON
Between 2 seconds and 2
minutes (and six seconds) after
the power ON, the motor will
make a single tilt movement as
conrmationthatitisreadyto
learn a new Main
On the new Main Emitter:
Press FOUR times the P3
button (located on the back
of the emitter)
Then the motor will make
two tilt movement as
conrmationthatthenew
Main emitter has been
learned
10 FULL RESET (DELETE ALL TRANSMITTTERS, LIMIT SWITCHES SET UP, ...) through any transmitter learned on the motor
switch
OFF/ON
hold
5
seconds
BIP
BIP
BIP
BIP
1 2 3 4 5 6 7 8
BIPBIPBIPBIP BIP BIP BIP BIP
10
BIP
9
BIP
Switch power OFF, in the
motor which we want do
the FULL RESET. After 5
seconds, switch power ON
Press TEN times the P3 button (located on the back of the emitter). Be sure to HOLD pressing on the TEN time.
Then the motor will make
two tilt movement as
ConrmationthataFULL
RESET has been done
NOTE:assoonasthemotorconrmthetotalcanecllation,themotorreturnstotheoriginalparameters.Willbenecessarystartfromthepointno.2tolearnaMaintransmitetrs.
WHAT TO DO IF?
1. Transmitter (learned on the motors) doesn’t work:
• The battery is consumed, replaced it by a new one.
• Be sure that motor is powered ON.
• Check if any interference in disturbing the signal.
2. Motor is working Step by Step (deadman):
• No limit switches are setted up on the motor. Set up them (up and down). After that motor will work in automatic mode.
3. Up and Down buttons are not in correspondende with the motor movement:
• If you have not set up the limit switch, do it, starting with the down limit switch.
• If limit switches have been setted up, you have to delete it (point 5) and set up agin (point 4-1 and 4-2).
4. Atter a power OFF/ON, the motor is emitting till SEVEN BIPs:
• Limit switches have been not setted up, please set up them (points 4-1 and 4-2).
5. Main transmitter doesn’t work or it is missing:
• Replace the Main transmitter, follwong the instructions (point 9-1 or 9-2).
6. Roller shutter is stopping in a wrong point:
• Do a full movement in ecah direction (up and down). After that check again. If motor still not stopping on the desires point, will be necessary delete its limit switch (point 5)
and does it again (point 4-1 and 4-2).
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jolly Motor JE50 RA9 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jolly Motor JE50 RA9 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info