553861
17
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
&+"%!%&&%
This machine has 13 different types of stitching.
a.Stitching to the right
b.Stitching to the left
c.Whipstitch
d.Zigzag stitching
e.Normal stitching (short, medium, long)
f.Buttonholes
$($%%&& '&&!
-If you hold this button down the machine will stitch backwards which is ideal for
reinforcing seams.
!)&!%)! '&&! %
-To sew on buttons you will need to put in place the button accessory that is provi-
ded (nº 8) which locks down to the lower plate by means of the 3 pivots.
-Once in place you must pull up the lower thread as indicated in previous sections.
-Then you put the button that you wish to sew down on the cloth and tack down the
button by hand to prevent it from moving.
-Place the cloth with the button underneath the presser foot and select the
stitching.
-Lower the presser foot downwards and lower the needle down manually with
the manual wheel in order to ensure that the needle coincides with the holes in the
button. Once you have checked that the needle coincides with the two holes in the
button, press down the pedal to begin to sew the button on automatically.
-If the button has 4 holes the operation has to be repeated by turning the cloth
around 90 degrees.
!)&!%)'&&! !%
-To make buttonholes you have to use the stitching indicated below and also the
buttonhole presser foot. To do this you have to substitute the normal presser foot
with the special buttonhole presser foot. To do this the section HOW TO REMOVE
THE PRESSER FOOT has to be followed.
1.To start, please mark the length of the buttonhole on the cloth with a pencil.
2.Put the marked cloth under the presser foot with the buttonhole mark facing you.
3.Move the presser foot slide guide (A) towards you in such a way as the upper
mark (B) of the guide coincides with the buttonhole starting mark that has been
marked on the cloth.
4.Select the buttonhole stitching with the stitching selector dial and sew for-
wards until you reach the buttonhole mark.
5.Select the buttonhole stitching with the stitching selector dial and sew 5 or 6
stitches.
6.Select the buttonhole stitching with the stitching selector dial with the back-
wards stitching button (nº 9) until you reach the back buttonhole mark.
7.Select the buttonhole stitching with the stitching selector dial and sew 5 or 6
stitches.
8.Remove the cloth from the machine and cut the thread.
9.And now in order to open the buttonhole please use the buttonhole cutter as indi-
cated in the following illustration.
   %&!$
-Your machine requires regular cleaning and lubrication. For satisfactory sewing, a
machine which is used for a few hours a day needs to be cleaned and oiled once
a month.
"!$& & Disconnect power supply before performing maintenance on the
machine. Remove holding cloth and needle. Remove needle plate. Brush off all
dust and lint.
-Clean shuttle case with a cleaning brush or soft cloth. Use oil manufactured spe-
cially for sewing machine use. Other oil will eventually cause mechanism to jam.
Apply one drop of oil on the shuttle where friction occurs.
32-E E-33
a.
b.
c.
d.
e.
f.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jocca 6643 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jocca 6643 in de taal/talen: Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info