545556
38
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
SnapScan9000
-Patent pending-
User Manual
Version 1.5
November 2010
2
DeclarationofConformity
We declare JOBOInternationalGmbH,
Eintrachtstr.14,
D51645Gummersbach
thatthe“SnapScan9000”
complies with the following directives:
EN 55022:2006+A1:2007 Radio interference suppression (ITE).
Limits and methods of measurement
EN 55024:1998/A2:2003 EMC Immunity to Radiated Fields (ITE)
EN61000-3-2:2006 Elektromagnetic Compatibility (EMC-Part 3-2)
EN61000-3-3:2008 Elektromagnetic Compatibility (EMC-Part 3-3)
This declaration of EC conformity shall become null and void when the assembly is
subjected to any modification that has not met with our approval.
Gummersbach,05.September2010 JohannesBockemühl
Geschäftsführer
3
Index
I. Unpack SnapScan9000......................................................4
II. Install film into the film holder....................................6
III. Quick Start..................................................................9
IV. Operation Guide.........................................................14
1. Capture ..................................................................... 14
2. Film Type .................................................................. 32
3. Setting Mode. ............................................................ 35
V. Specification...............................................................38
Waste Management............................................................39
Packaging ...................................................................... 39
Disposal of WEEE (Waste Electrical and Electronic Equipment) 39
Service .............................................................................40
4
I. Unpack SnapScan9000
JOBO SnapScan 9000 Negative Holder User Manual
USB power core USB/Video cable Roll Film Holder Clean brush
2 x Rapid slide feeder
5
Note
We strongly suggest using a clean, dry, non-alcohol
cotton swab to clean the glass surface periodically
to produce a clear image during operation.
Clean dust from Film Scanner back light, to use the
clean brush to wipe the dust.
Dust or dirt from the negative, slide films and cover
trays may affect the scanned image quality, please
make sure the materials are cleaned before inserting
into the scanner.
Please find recommend, processional purger from photo store to clean the dust on
films if any to avoid damaging the only one copy of old films.
6
II. Install film into the film holder
• Insert slides into the rapid slide feeder
1.Putastackofslidesintothefeeder
Aftertheslidesareplacedintotheholder
andtheholderisplacedintotheslotofthe
scanner(referto„QuickStart“)theslides
canbeslideintothescannerbymovingthe
holderbackwardandforward.
Theslidesare
positionedautomatically
insidethescanner.

Install the Negative Film into holder
1. Open the film holder as illustrated
2. Install film into negative film slot 3. Close the film holder
FilmSlot
7
Install the Roll Film into holder:
1. Take out the roll film holder from package
2. Insert roll film into film slot 3. Pull out the roll film in another side
8
Note
To avoid mirror image, follow the serial numbers (from left to right) on top of film
when install negative film into holder
If the image is upside down [see fig.2], the image can be corrected by Flip function
in Button of device before capture.
Figure1
Figure2
9
III. Quick Start
Right/+button
FilmSlot
OKbutton
SDcardSlot
Left/‐button
Powerbutton
USBport
TVoutjack
PowerstatusLED
10
1. Put Film onto the film cartridge
2. Insert the film cartridge into JOBO SnapScan 9000
11
3. Connect power USB cable to SnapScan 9000
4. Turn on Device by pressing the power button
12
5. Press OK button to capture the image
6. Follow the menu on display for scanning
13
7. After finished the capture, take out the SD card which stored capture
images
8. Or read picture from PC by MSDC mode
14
IV. Operation Guide
Home: Main menu
Capture: capture mode (default)
Playback: playback mode
Film Type: define the film type which loaded in cartridge
USB mode: MSDC (Mass Storage Device Class) mode
Setting: TV out and format option
1. Capture
After welcome page, above menu will remains for 5 sec. User can press up/down button
for desired menu. Or system will auto enter Capture mode if there is no action during
this 5 second period.
Capture
Playback
FilmType
USBmode
Setting
Capture
15
1.1 Capture: <Up>/<Down> (Button)
Press <Up> button to enter Mirror/Flip adjustment (see Chapter 1.2)
Press <Down> button to enter Brightness/Color adjustment (see Chapter 1.3)
<
U
p
>Right/Up
<Down>
Left/Down
<Up>
<Down>
<OK>GoNext
button
16
1.2 Capture: <Up>/<Down> - Mirror/Flip (Button)
Press <Up> button to change image left to right
Press <Down> button to upside down image
<
Up>Right/Up
<Down>
Left/Down
<Up>
<Down>
<OK>GoBack
to1.1Capture
button
17
1.3 Capture: <Up>/<Down> - Brightness/Color (Button)
Press <Up> button to enter Brightness adjustment (See Chapter 1.4)
Press <Down> button to enter Color adjustment (See Chapter 1.5)
<
Up>Right/Up
<Down>
Left/Down
<Up>
<Down>
<OK>GoBack
to1.1Capture
button
18
1.4 Capture: <Up>/<Down> - Brightness (Button)
Press <Up> button to increase Brightness with ranges of -3 to 3
Press <Down> button to decrease Brightness with ranges of -3 to 3
<
Up>Right/Up
<Down>
Left/Down
<Up>
<Down>
<OK>GoBack
to1.1Capture
button
19
1.5 Capture: <Up>/<Down> - Color Red (Button)
Press <Up> button to increase red color with ranges of -3 to 3
Press <Down> button to decrease red color with ranges of -3 to 3
<
Up>Right/Up
<Down>
L
e
f
t/
D
o
wn
<Up>
<Down>
<OK>GoNext
toColorGreen
button
20
1.6 Capture: <Up>/<Down> - Color Green (Button)
Press <Up> button to increase green color with ranges of -3 to 3
Press <Down> button to decrease green color with ranges of -3 to 3
<
Up>Right/Up
<Down>
Left/Down
<Up>
<Down>
<OK>GoNext
toColorBlue
button
21
1.7 Capture: <Up>/<Down> - Color Blue (Button)
Press <Up> button to increase blue color with ranges of -3 to 3
Press <Down> button to decrease blue color with ranges of -3 to 3
<
Up>Right/Up
<Down>
Left
/
Down
<Up>
<Down>
<OK>GoBack
to1.1Capture
button
22
1.8 Capture mode
Once enter capture mode, there will be a red indicator on left top corner to indicate it is
in live view mode. When the film cartridge is inserted into the scanner slot, the image
always shows the positive image according to previous defined Film Type (after power
on. the Film Type is default to negative film). Reconfirm the film position through the
display before press OK button.
1.9 Capture: Edit Menu
Save: save captured image
Rotate +90: continue rotate +90 degrees
Rotate -90: continue rotate -90 degrees
(this is for adjusting the user who took the portrait picture)
Cancel: cancel any editing with this image
Home: Back to main menu
Liveviewindicator
(
flashin
g
at0.5secrate
)
Save
Rotate+90
Cancel
Rotate‐90
Home
Selectedima
g
e
23
1.10 Live View -> Capture/Edit Menu
Live View Capture/Edit Menu
OK
OK
Once press OK button in live view, the edit menu will be appeared. When user press OK
button again, the current image will be saved into SD card. The display will return to
live view again.
1.11 Capture: Save
Once user press OK button on top of SnapScan 9000, preview (live view) image will be
selected and shown on the TFT which will take between 3-4 second with 4 icons shown
on the left side of the screen. Save icon will be highlighted for user to confirm the
saving by OK button. After the above step, display goes back to live view mode
(preview).
Save
24
1.12 Capture: Rotate +/-90 degrees
User can apply the up/down button for further editing (rotate +90/-90). Once user
confirm rotate +90 degrees, they can press the OK button, the image will be rotate +90
degrees and cursor will remain at Save. Press OK button again will save the rotated
image to SD card and screen will return to live view. For continuously rotate +90
degrees, move cursor to rotate again and press OK.
1.13 Capture: Cancel
Or select Cancel and press OK button to cancel any of the editing step with present
selected image and SnapScan 9000 goes to live view mode (nothing will be saved onto
the SD card).
OK
Playback
/capturedimage
25
1.14 Capture: Home
Go back to main menu, press OK button when select Home icon.
1.15 Exit from Edit mode back to Capture mode (Live View)
Once User presses OK button for save or cancel option, display will return to capture
mode/live view. Then, user can move the film cartridge to next target film to capture.
1.16 Memory full
Nextimagein
filmcartridge
OK
OK
26
Once the internal memory or SD card is full, user can see a SD card full once press OK
button. User has to down load the images to PC or replace another SD card for continue
capture.
1.17 SD card locked
If the SD was locked, once press the OK button, a SD Card locked icon displays on screen.
Please do slide the switch of SD card to unlock before insert into device.
1.18 SD card error
If scanner cannot detect SD card in good condition, a warning icon with question mark
will be shown on display. Please try to format the SD card or replace another proper SD
card for continue further operation. (Refer to Setting section)
SDcardlocked
indicator
SDcarderror
indicator
27
1.19 Playback
Playback
Press Down button to Playback mode when power on SnapScan 9000 or access the main
menu by Home icon if during operation. Press OK button to confirm the selection.
1.20 Playback: Auto Slide Show
Slide show mode
Once user enter playback mode (default to slide show), 2.4 TFT will auto display all
images stored in SD card with 2 seconds interval from previous captured image. User can
also stop the slide show mode by press OK button.
28
1.21 Playback: Edit Menu
Press 2x OK during playback
Rotate +90: captured image rotate +90 degrees
Rotate -90: captured image rotate -90 degrees
Mirror: change image left to right
Flip: upside down image
Exit: returns to Slide show
Delete: delete this picture stored in SD card
Save: save the modified image onto SD card
Home: returns to main menu
1.22 Playback: Slide mode -> Edit mode
User can interrupt (stop) the slide show mode to stand alone playback mode (single picture
playback) by press OK button. (Pause slide show) Then user is able to scroll each picture by
up/down button. Once user select the picture stored in SD card which intended to be modified,
then use OK button again to bring out the edit mode for modification
Save
Hom
Rotate+90
Exit
Delete
Rotate‐90
Mirror
Fli
p
29
1.23 Slide Show -> Single picture -> Edit mode
Slide show mode Edit mode
1.24 Playback: Rotate/Mirror/Flip/Save
If user wants to Rotate +90 degrees by OK button, the image will be rotate +90 degrees
and cursor will remains at Save. Press OK button again to save modified result and next
picture will be shown (N+1). For continuously Rotate +90 degrees, move cursor to
Rotate again and press OK. (Same for Rotate -90, Mirror, and Flip function)
Pausse
OK
OK
Singlepicturemode
UseUp/Downbutton
toscrollpicturetobemodified
OK
30
1.25 Playback: Exit
Once user select the EXIT function in edit menu, the display will go back to slide show
starting with the current picture in internal memory or SD card without saving any
change of present picture
1.26 Playback: Delete
Delete will delete the present selected picture and next picture will be shown (N+1).
Cursor goes to Exit icon. If user intend to process continuously delete, just move to
delete icon again and press OK to confirm.
OK
OK
31
1.27 Playback: Home
Go back to main menu, press OK button when select Home icon
1.28 Playback: No Picture
If there’s no picture inside internal memory or SD card when enter playback mode, a No
picture symbol will show on display.
OK
OK
32
2. Film Type
Film Type
Change film type definition by enter Film Type menu when power on SnapScan 9000 or
access the main menu by Home icon if during operation. Press down button for Film
Type and press OK to confirm.
2.1 Film Type: Select Film Type
Negative film: select Negative film when cartridge loaded with negative film
Slide: select Slide type when load slide in holder
B&W film: select B&W when cartridge loaded with Black&White negative film
Slidefilm
B&WNegative
ColorNegative
film
33
2.2 Film Type: Example
ColorNegative
film
B&W
Negativefilm
Slide
Loaded
Into
Cartridge
34
2.3 USB Mode
After finished capture, user can download the stored images from internal memory or SD
card to PC by selecting USB mode. Press OK button when connect USB cable to PC,
SnapScan 9000 becomes a mass storage device. User can review or edit images once PC
detected the external storage device. Or just take out the SD card from device into PC
to read the images directly.
2.4 USB Mode: Status
Once user select USB mode, SnapScan 9000 becomes a mass storage device and then a
status icon shows on display, then user can find an external USB disk device from my
computer and review the images in internal memory or SD card with PC.
USBmode
35
3. Setting Mode.
The setting mode covers TV out and format option. User can connect the device to TV
and finish the operation with TV display. Moreover, the scanned images can be
playback on TV display to share with family.
If the SD card was formatted by the other devices and not readable by scanner, user can
apply the format function in scanner to correct required format.
3.1 Setting Mode
TV out: select NTSC or PAL according to required interface
Format: format internal memory or SD card
Exit: returns to main menu
Settingmode
TVout
Format
Exit
36
3.2 Setting: TV out
When user want to switch the display from on device LCD to TV display, user can
connect device to TV and select PAL or NTSC as required in TV out menu by OK button.
Then, the TV display will show the same option for scanning operation. Or directly
enter playback mode to slide show captured images on TV.
3.3 Setting: Format
If the internal memory or SD card requires format by scanner, user can enter format
mode by press OK button. The default setting will be cancel format. User can press
OK button again to cancel the format or select confirm icon to confirm format the
memory.
OK
OK
37
Note
If there’s no SD card inside device, the internal memory will be formatted once process
Format. Instead, if SD card is inserted in device, SD card will be formatted.
Good bye page
38
V. Specification
Image Sensor: 9 mega CMOS sensor
Lens: Precision
TM
Glass Element Fixed Focus
LCD: 2.4’’ Color TFT LCD (2.5” optional)
Internal memory: 24MB NAND Flash (for saving images)
Focus Range: Fixed focus
Exposure Control: 6 levels of control
Color Balance: 6 levels of control
Scan Quality: 2,400 dpi 3,600 interpolated
Data Conversion: 10 bits per color channel
Scan Method: Single pass
Light Source: Back light (3 white LEDs)
Interface: USB 2.0, TV-out (video 3.5mm jack)
USB Configuration: Mass Storage Device Class/MSDC
Power: 5V adapter, or USB power
Dimensions: 82x86x152mm
Weight: 0.41kg
External memory: SD/MMC compatible
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jobo SnapScan 9000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jobo SnapScan 9000 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Jobo SnapScan 9000

Jobo SnapScan 9000 Gebruiksaanwijzing - Deutsch - 39 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info