21
In order to maximize speed, the GVX will
determine the memory card’s speed grade
before starting the copy process. Some media
adapters designed for using SD or MS memory
cards in CompactFlash slots may disturb this
mechanism and as a consequence copying
may be slowed down. In case you experience
problems, use the “Show Previews” copy mode.
- Show Previews:
When you like to see the previews during the
copying process, choose this option.
It is strongly advised not to switch off the unit
during copy actions. Doing so may corrupt the
data structure on GVX’s hard disk drive. If the
unit accidentally powers down during copying,
carefully check if all files were copied and then
run the disk repair utility (see chapter 6.4,
section “Check Hard Disk for Errors”).
4. Action when done:
This function defines what GVX will do after the
copy action is complete. Use the joystick left /
right to select one of the four options.
- Do Nothing:
The GVX will stay switched on and wait for user
interaction.
- Switch off:
The GVX will switch off when it has performed
the actions defined in the “Copy Action”
setting. This can be very convenient because
you can leave the unit unattended and go on
shooting pictures, for example. On your return
you can power on the unit and check your data.
- Beep:
The GVX will produce a beep at the end of the
copy process.
- Beep + Switch off:
The GVX will produce a beep at the end of the
copy process and then switch off.
5. Generate cached views:
After copying, the GVX can generate so called
“cached views”. They can be helpful for the
selection of pictures, because the pictures
will appear on the screen without delay
immediately after they have been selected. The
caching process may take some time, especially
when copying albums that contain many
pictures. Use the joystick left / right to select
one of the two options.
- No
As default this function is switched off. No
cached views are generated.
- Yes
Cached views are generated from every file that
enables this action (e.g. JPEG, TIFF, RAW).
Other file formats are ignored. As generating
the cached views takes some time, it is advised
to connect the GVX to the mains using the AC
power supply.
6.1.2 Export Data to a Memory
Card
To export pictures to a memory card do the
following:
To copy data to a memory card insert the
memory card resp. the adapter into the
CompactFlash card slot. Then follow the steps
below:
1 Press the “Home” button.
2 Press softkey 1, “Photos”.
3 Use the joystick up / down until the album
you want to copy is highlighted.
4 Press softkey 5, “Manage”.
5 Use the joystick up / down until “Copy
Pictures to CF Memory Card” is highlighted.
6 Press the joystick (enter) and you will see
the screen as depicted in fig. 6.2.
GB
