509192
6
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
JCD2010
6
BASIC OPERATION
Power On/Off ( )
Press the button (1) to turn the unit ON or OFF.
Volume Control
To change the volume level, rotate the VOL+/- control (4). When the volume is adjusted, the
volume level is shown on the display panel as a number ranging from 00 (lowest) to 63
(highest).
Mute
Press the MUTE button (8) on the control panel to mute the audio output. Press MUTE again to
restore the audio output to the previous level.
Mode
Press the MODE button (5) on the control panel to select a different mode of operation, as
indicated on the display panel. Available modes include Radio, CD, and AUX (optional
Auxiliary Input).
Auxiliary Input
To connect a portable audio device, insert a standard 3.5mm (audio line output or headphone
output from your portable CD/MP3/iPod or other media player) into the front "AUX IN" jack.
Press the MODE button (5) to change to AUX mode. Press MODE again to cancel AUX mode
and return to previous mode.
Audio Menu
Press the VOL+/- control (4) on the control panel to access the Audio Menu. You can navigate
through the Audio Menu items by pressing the volume control button repeatedly. Once the
desired menu item appears on the display, adjust that option by turning the volume control
knob within 5 seconds. The unit will automatically exit the Audio Menu after five seconds of
inactivity. The following menu items can be adjusted.
Volume Level
Use the button to adjust the Volume level from “00” (lowest) to “63” (highest).
Bass Level
Use the button to adjust the Bass (BA) level range from “-7” to “7”.
Treble Level
Use the button to adjust the Treble (TR) level range from “-7” to “7”.
Balance
Use the button to adjust the Balance (BL) between the right and left speakers from “9L” (full
left) to “9R” (full right). “BL:0” represents an equal balance between the right and left speakers.
Fader
Use the button to adjust the Fader (Fd) between the rear and front speakers from “9R” (full
rear) to “9F” (full front). “Fd:0” represents an equal balance between the front and rear
speakers.
Clock Set
In clock display mode, press VOL+/- (PUSH SEL) control (4) for 2 seconds to enter clock
adjustment mode.
While the hour is flashing, rotate the VOL+/- control (4) to adjust the value as follows:
USA Tuning Mode: 1-12
EURO Tuning Mode: 00 - 23
Press the VOL+/- control to confirm the hours.
While the minutes are flashing, rotate the volume control to change the value
(from 00 to 59).
Press the VOL+/- control for 2 seconds to confirm the time and exit clock adjustment
mode.
Reset
Use a pencil or any non-metallic object to press and hold the RESET button (17) for five
seconds to reset the main unit. The unit will return to the factory default settings. The reset
button should be activated for the following reasons:
initial installation of the unit when all wiring is completed
function buttons do not operate
error symbol on the display
Preset Equalizer (EQ/LD)
Press the EQ/LD button (15) to select from the following preset equalizer functions: CLAS
(classic) > ROC (rock) > POP > DSP (OFF). When “DSP” is selected, the EQ function is
controlled by the user bass/treble settings.
Loudness (EQ/LD)
Press and hold the EQ/LD button (15) to toggle loudness on/off. When listening to music at low
volumes, this feature will boost the bass and treble ranges to compensate for the
characteristics of human hearing.
1
4
6
5
2
3
8
10
16
9
11
12
13
14
21
15
20
19
18
7
17
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jensen JCD2010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jensen JCD2010 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info