652549

Jacob Jensen Doorbell Cordless Handleiding

12
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
12
UK
Congratulations on the purchase of your new JACOB
JENSEN
TM
Doorbell.
The doorbell is designed in Denmark by Jacob Jensen, whose products have gained
international recognition for their original, simple and classic design. Jacob Jensen
has received around 100 prizes from around the world and has 19 products included
in the Design Study Collection and The Design Collection of The Museum of Modern
Art in New York.
The cordless doorbell consists of a bell push and a chime offering five different,
specially composed high sound quality tunes. Listen to Jacob Jensen knocking at
the door, a classic town hall bell, a contemporary or oriental inspired tune or a low-
frequency tune, designed especially for the hard-of-hearing. The sound level can
be set to high/low or off. Lights on both the chime and the bell push will illuminate
when the bell is rung or the batteries need changing.
The doorbell is supplied with one bell push and batteries are included. One single
chime can operate with an unlimited number of bell pushes and extra bell pushes
are available separately. The chime can be free standing or wall mounted, either
using screws or a JACOB
JENSEN
TM
Mounting plate. The bell push can be mounted
with screws or double-sided tape. The maximum working distance between the
chime and the bell push is up to 150 meters though positioning either unit on
or near metal structures or reinforced pvc doors or door frames may block the
transmission or reduce the transmission range.
Activating / changing the batteries
Install the batteries according to the polarity symbols marked in the battery
compartment. With new product batteries to the chime are included in the gift box.
Batteries are installed in the bell push, but here the plastic strip must be removed in
the battery compartment - under the lid mounted with four screws ( see p. 25).
Note: Instead of batteries, a plug-in mains adaptor, type 6V DC minimum 400mA,
available from electronics stores, can be connected to the chime (see page 24).
Insert the adaptor into the external socket in the chime’s battery compartment and
plug into the wall outlet.
Set the code
Your JACOB
JENSEN
TM
cordless Doorbell has a coding system to ensure that there
is no interference to or from any nearby cordless product. The chime and the bell
push(es) need to have identical codes to recognise each other. Open the battery
compartment on both units and set the 4 keys (each has two positions) to identical
patterns to set up the code.
NB: A code has been pre-set. If a clear signal is obtained there is no need to change
this code.
Set the light
The lights on both the chime and the bell push will illuminate to indicate a ring.
You can turn the light ON/OFF on the chime using the switch in the battery
compartment.
Light signals
Chime when someone is ringing: 2 flashes–pause–2 flashes etc.
Chime at low battery: flash–long pause–flash-long pause etc.
bell push when pressing the button: long flash
bell push at low battery: flash–long pause–flash-long pause etc.
Select tune
The doorbell offers you five different tunes. If you connect more than one bell push
it may be convenient to assign a different tune to each one, so that you can identify
which doorbell is ringing.
1) Classic town hall bell chime.
2) Contemporary lounge-inspired tune.
3) Oriental-inspired tune.
4) Low-frequency tune – suitable for the hard-of-hearing.
5) Jacob Jensen knocking at an old, wooden door.
The Door bell is pre-set to tune no. 5. Change the tune by using the switch in the
battery compartment of the bell push.
Note: Only one tune (or light) can be activated at a time. Once the bell has been
pressed, further presses will be ignored until the tune has been finished.
Volume
Set the volume to high/low/OFF by using the switch in the battery compartment of
the chime.
Reset
The RESET key in the battery compartment is used for resetting the system. If there is
any malfunction (such as no sound from the chime, try pressing the RESET button to
make the unit ready to receive or transmit a signal again.
Mounting
Before mounting the chime and the bell push(es) ensure that a clear signal can
be obtained. Place the units next to each other, activate or install the batteries,
press the bell push and listen to the tune. Move the units to the desired locations
and check that the signal is still operating. If not, remove the object causing the
interference or find a new location. Note that other cordless products, strengthened
PVC doors, door frames, steel constructions and building materials may block the
signal or cause interference.
Chime
The chime can be free standing or wall mounted using the enclosed screws and
plugs (see mounting template in the back of this manual), or with a JACOB
JENSEN
TM
Mounting plate.
Bell push
The bell push is mounted using the enclosed mounting plate, screws and plugs
(see p. 25). When the mounting plate is fixed, slide down the bell push until a
"click" is heard. For changing the battery, release the bottom lock by pressing the
hook towards you (use a small and flat screwdriver to handle the lock). Remain with
the lock in released position while sliding the bell push upwards.
Note: The bell push is not to be mounted on metal door frames.
Low battery
Change the batteries on the respective unit if the light on the chime or bell push
light up in the sequence: flash – long pause – flash (see paragraph on light signals
and changing the batteries).
Specifications
Operating temperature – chime : 5˚C to 50˚C (41˚F to 122˚F)
Operating temperature – bell push : -20˚C to 50˚C (-4˚F to 122˚F)
RF Transmission Frequency : 433 MHz
Maximum no. of bell push(es) : unlimited
Batteries - chime : 6 pcs. "AA" – Alkaline / Lithium recommended
Batteries - bell push : 2 pcs. Lithium CR2032 batteries
Dimensions - chime : 112 x 36 x 178 mm
Weight - chime : 400 g
Dimensions – bell push : 41 x 24 x 90 mm
Weight – bell push : 58 g
Maintenance
The following guidelines will help you care for your JACOB
JENSEN
TM
Doorbell unit so
you can enjoy using it for many years.
1. Keep the chime dry at all times. If it becomes wet, wipe it dry immediately. Liquids
can contain minerals that might corrode the electronic circuits.
Note: provided the casing is intact the bell push is weatherproof.
2. Use and store the units only under normal temperatures. Temperature extremes
can shorten the life of electronic components, damage batteries and distort or
melt plastic parts.
3. Handle the units gently and with care. If they are dropped, circuit boards can be
damaged, resulting in malfunction.
4. Keep the units free from dust and dirt to avoid the premature wear of parts.
5. Clean the units by wiping a soft cloth. Do not use abrasive chemicals, cleaning
solvents or strong detergents to clean the units.
6. Use only fresh batteries of the required size and type. Always remove old or weak
batteries as they might leak chemicals that will damage the product.
7. Modifying or tampering with the internal components of the doorbell or the bell
push(es) may cause malfunction and will invalidate the warranty.
JACOB
JENSEN
TM
Doorbell (registered design)
… 12 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Jacob-Jensen-Doorbell-Cordless

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jacob Jensen Doorbell Cordless bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jacob Jensen Doorbell Cordless in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 0,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info