163456
82
Verklein
Vergroot
Pagina terug
1/82
Pagina verder
GET0119-001A
[E/EX]
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
KD-S641
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
ENGLISH
DEUTSCH
NEDERLANDS
FRANÇAIS
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de
desbetreffende handleiding.
COMPACT
DIGITAL AUDIO
SEL
LOUD
DISP
SSM
SCMMODE
7 9 10 12
RND
11
RPT
8
MO
AM
CD
FM
cover.001A.KD-S641[E_EX]f.p65 10/9/02, 1:42 PM3
2
ENGLISH
Position And Reproduction Of Labels
CAUTION: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
TO BEAM. (e)
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgåudsæt-
telse for stråling. (d)
VARNING: Osynlig laser-
strålning när denna del
är öppnad och spärren
är
urkopplad. Betrakta ej
strålen. (s)
VARO : Avattaessa ja suo-
jalukitus ohitettaessa olet
alttiina näkymättömälle
lasersäteilylle. Älä katso
säteeseen. (f)
Caution:
This product contains a laser component
of higher laser class than Class 1.
IMPORTANT FOR LASER PRODUCTS
Precautions:
1.CLASS 1 LASER PRODUCT
2.CAUTION: Invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to
beam.
3.CAUTION: Do not open the top cover. There are no
user-serviceable parts inside. Leave all servicing to
qualified service personnel.
4.CAUTION: This CD player uses invisible laser radiation
and is equipped with safety switches to prevent
radiation emission when unloading CDs. It is dangerous
to defeat the safety switches.
5.CAUTION: Use of controls, adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Name/Rating plate
Bottom panel of the main unit
How to reset your unit
Press and hold both the SEL (select) and (standby/on/attenuator) buttons at the same
time for several seconds.
This will reset the built-in microcomputer.
Notes:
Your preset adjustments—such as preset channels or sound adjustments—will also be erased.
If a CD is in the unit, it will eject when you reset the unit. Be careful not to drop the CD.
(standby/on/attenuator)
SEL (select)
SSM
SCMMODE
7 9 10 12
RND
11
RPT
8
MO
AM
CD
FM
SEL
LOUD
DISP
EN02-04KD-S641[E_EX]f.p65 10/9/02, 1:42 PM2
3
ENGLISH
CONTENTS
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
BEFORE USE
*
For safety....
Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
Stop the car before performing any complicated
operations.
*
Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
How to reset your unit ............................... 2
How to use the MODE button ................... 3
LOCATION OF THE BUTTONS ............ 4
Control panel ............................................. 4
BASIC OPERATIONS ....................... 5
Turning on the power ................................ 5
Setting the clock ........................................ 6
RADIO OPERATIONS ...................... 7
Listening to the radio ................................. 7
Storing stations in memory ....................... 9
Tuning in to a preset station ...................... 10
CD OPERATIONS ........................... 11
Playing a CD ............................................. 11
Locating a track or a particular portion
on a CD .................................................. 12
Selecting CD playback modes .................. 12
Prohibiting CD ejection ............................. 13
Note:
For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on
the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.
How to use the MODE button
If you press MODE, the unit goes into functions mode and the number buttons work as different
function buttons.
To use these buttons as number buttons again after pressing MODE, wait for 5 seconds
without pressing any number button until the functions mode is cleared.
Pressing MODE again also clears the functions mode.
SOUND ADJUSTMENTS ................... 14
Adjusting the sound .................................. 14
Turning on/off the loudness function ......... 14
Using the sound control memory (SCM) ... 15
Storing your own sound adjustments ........ 16
OTHER MAIN FUNCTIONS ................ 17
Selecting the level display—LEVEL .......... 17
Canceling Advanced SCM—SCM LINK ... 17
Detaching the control panel ...................... 18
TROUBLESHOOTING ...................... 19
MAINTENANCE ............................. 20
Handling discs ........................................... 20
SPECIFICATIONS ........................... 21
Time countdown indicator
MO
910 127
RND
11
RPT
8
MO
MODE
EN02-04KD-S641[E_EX]f.p65 10/9/02, 1:42 PM3
4
ENGLISH
LOCATION OF THE BUTTONS
Control panel
1 (standby/on/attenuator) button
2 LOUD (loudness) button
3 SEL (select) button
4 Display window
5 Loading slot
6 0 (eject) button
7 CD button
8 AM button
9 FM button
p ¢/4 buttons
Also functions as SSM buttons when pressed
together.
q +/ buttons
w DISP (display) button
e MO (monaural) button
r Number buttons
t RPT (repeat) button
y RND (random) button
u MODE button
i SCM (sound control memory) button
o (control panel release) button
Display window
; SCM (sound control memory) indicator
a CD source indicator
s FM band indicators (FM1, FM2, FM3)
d AM band indicator
f Tuner reception indicators
MO (monaural), ST (stereo)
g RND (random) indicator
h RPT (repeat) indicator
j LOUD (loudness) indicator
k CDin indicator
l Main display
/ Volume level indicator
SSM
SCMMODE
7 9 10 12
RND
11
RPT
8
MO
AM
CD
FM
SEL
LOUD
DISP
1
69
7
8
p
ui
e
tyr
w
q
23
54
MO
ST RND RPT
SCM
;dga
h
j
/
f
s
k
l
o
Display window
EN02-04KD-S641[E_EX]f.p65 10/9/02, 1:42 PM4
5
ENGLISH
BASIC OPERATIONS
Turning on the power
1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step
2
below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 7 – 10.
To play a CD,
see pages 11 – 13.
3
Adjust the volume.
4
Adjust the sound as you want.
(See pages 14 – 16.)
To drop the volume in a moment
Press briefly while listening to any
source. AT T starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold for more than one
second.
SEE YOU appears, then the unit turns off.
If you turn off the power while listening to a
CD, CD play will start from where playback has
been stopped previously, next time you turn on
the power.
CAUTION on Volume Setting:
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged
by the sudden increase in the output level.
Therefore, lower the volume before playing a disc
and adjust it as required during playback.
AM
CD
FM
Volume level indicator (see page 17)
Volume level appears.
To increase the volume
To decrease the volume
SSM
SCMMODE
7 9 10 12
RND
11
RPT
8
MO
AM
CD
FM
SEL
LOUD
DISP
13 2
EN05-06KD-S641[E_EX]f.p65 10/9/02, 1:42 PM5
6
ENGLISH
Setting the clock
1
Press and hold SEL (select) for more
than 2 seconds.
CLOCK H, CLOCK M, SCM LINK, or
LEVEL appears on the display.
2
Set the hour.
1 Select CLOCK H (hour) if not shown on
the display.
2 Adjust the hour.
3
Set the minute.
1 Select CLOCK M (minute).
2 Adjust the minute.
4
Finish the setting.
To check the current clock time or change the
display mode
Press DISP (display)
repeatedly.
Each time you press the
button, the display mode
changes as follows:
During tuner operation:
During CD operation:
During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns
off.
SEL
CLOCK H CLOCK M
LEVEL SCM LINK
CLOCK H CLOCK M
LEVEL SCM LINK
SEL
DISP
ClockFrequency
ClockElapsed playing time
SSM
SCMMODE
7 9 10 12
RND
11
RPT
8
MO
AM
CD
FM
SEL
LOUD
DISP
EN05-06KD-S641[E_EX]f.p65 10/9/02, 1:42 PM6
7
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or
manual searching to tune in to a particular
station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is
received, press the same button you have
pressed for searching.
To search stations of higher
frequencies
To search stations of lower
frequencies
SEL
LOUD
DISP
SCMMODE
7 9 10 12
RND
11
RPT
8
MO
AM
CD
FM
SSM
AM
CD
FM
FM1 FM2 FM3
AM
Selected band
appears.
Lights up when
receiving an FM
stereo broadcast
with sufficient signal
strength.
ST
EN07-10KD-S641[E_EX]f.p65 10/9/02, 1:43 PM7
8
ENGLISH
Searching a station manually:
Manual search
1
Select the band (FM1 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Press and hold ¢ or 4
until M (manual) starts flashing on
the display.
3
Tune in to a station you want while
M (manual) is flashing.
If you release your finger from the button,
the manual mode will automatically turns
off after 5 seconds.
If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM—MW/LW) until
you release the button.
When an FM stereo broadcast is hard to
receive:
1 Press MODE to enter the
functions mode while listening
to an FM stereo broadcast.
2 Press MO (monaural), while
still in the functions mode, so
that the MO indicator lights up
on the display.
Each time you press the
button, the MO indicator lights
up and goes off alternately.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.
To tune in to stations of lower
frequencies
To tune in to stations of higher
frequencies
MODE
8
MO
AM
CD
FM
FM1 FM2 FM3
AM
MO
EN07-10KD-S641[E_EX]f.p65 10/9/02, 1:43 PM8
9
ENGLISH
Storing stations in memory
You can use one of the following two methods to
store broadcasting stations in memory.
Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
1
Select the FM band (FM1 – 3) you
want to store FM stations into.
2
Press and hold both buttons for
more than 2 seconds.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number
buttons—No.1 (lowest frequency) to No.6
(highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
Ex.: Storing FM station of 88.3 MHz into the
preset number 1 of the FM1 band.
1
Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
2
Tune in to a station (in this example,
of 88.3 MHz).
“- -SSM- -” appears, then disappears when
automatic preset is over.
To tune in to stations of lower
frequencies
To tune in to stations of higher
frequencies
SSM
AM
CD
FM
FM1 FM2 FM3
AM
AM
CD
FM
FM1 FM2 FM3
CONTINUED ON THE NEXT PAGE
EN07-10KD-S641[E_EX]f.p65 10/18/02, 5:58 PM9
10
ENGLISH
3
Press and hold the number button
(in this example, 1) for more than 2
seconds.
4
Repeat the above procedure to store
other stations into other preset
numbers.
Notes:
A previously preset station is erased when a new
station is stored in the same preset number.
Preset stations are erased when the power supply to
the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset
the stations again.
Tuning in to a preset station
You can easily tune in to a preset station.
Remember that you must store stations first. If
you have not stored them yet, see Storing
stations in memory on pages 9 and 10.
1
Select the band (FM1 3, AM).
2
Select the number (1 6) for the
preset station you want.
7
P1 flashes for a few seconds.
AM
CD
FM
FM1 FM2 FM3
AM
910 127
RND
11
RPT
8
MO
EN07-10KD-S641[E_EX]f.p65 10/9/02, 1:43 PM10
EN, GE, FR, NL
1102KKSMDTJEIN
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Haben Sie PROBLEME mit dem Betrieb?
Bitte setzen Sie Ihr Gerät zurück
Siehe Seite Zurücksetzen des Geräts
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
Hebt u PROBLEMEN met de bediening?
Stel het apparaat terug
Zie de pagina met de paragraaf Het apparaat terugstellen
J
V
C
© 2002 VICTOR COMPANY OF JAPAN, LIMITED
cover.001A.KD-S641[E_EX]f.p65 10/9/02, 1:42 PM2
82

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC kd-s641r bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC kd-s641r in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 4,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info