165011
5
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
GEBRUIKSAANWIJZING
INSTRUCTIONS
VNN3832-311S
[E]
Detachable
KD-SX838R/S737R/S707R
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de 
desbetreffende handleiding.
NEDERLANDS
DEUTSCH
FRANÇAIS
ENGLISH
CD CHANGER CONTROL
SOUND
TP/ RDS
MO
RND
DISP
PTY
RPT
KS-SX838R
5
CD
TUNER
CD
-
CH
7
89
10
11
12
¢
4
/ATT
40 W x 4
SSM
SEL
0
BAND
KD-S707R
KD-SX838R
KD-S737R
SOUND
TP/ RDS
MO
RND
DISP
PTY
RPT
KS-S737R
5
CD
FM
AM
7
89
10
11
12
¢
4
/ATT
40 W x 4
SSM
SEL
0
SOUND
TP/ RDS
MO
RND
DISP
PTY
RPT
KS-S707R
5
CD
FM
AM
7
89
10
11
12
¢
4
/ATT
35 W x 4
SSM
SEL
0
ATT
FUNC
BAND
PROG
PRESET
DISC
DISC
2
DANGER: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
TO BEAM.  (e)
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude 
af funktion. Undgåudsæt-
telse for stråling. (d)
VARNING: Osynlig laser-
strålning när denna del
är öppnad och spärren
är
urkopplad. Betrakta ej 
strålen.  (s)
VARO : Avattaessa ja suo-
jalukitus ohitettaessa olet
alttiina näkymättömälle
lasersäteilylle. Älä katso
säteeseen. (f)
CLASS 1
LASER PRODUCT
Caution:
This product contains a laser component
of higher laser class than Class 1.
BEFORE USE
* For safety....
Do not raise the volume level too much, as this
will block outside sounds, making driving
dangerous.
Stop the car before performing any complicated
operations.
*Temperature inside the car....
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
IMPORTANT FOR LASER
PRODUCTS
Precautions:
1. CLASS 1 LASER PRODUCT
2. DANGER: Invisible laser radiation when
open and interlock failed or defeated. Avoid
direct exposure to beam.
3. CAUTION: Do not open the top cover.
There are no user-serviceable parts inside.
Leave all servicing to qualified service
personnel.
4. CAUTION: This CD player uses invisible
laser radiation and is equipped with safety
switches to prevent radiation emission
when unloading CDs. It is dangerous to
defeat the safety switches.
5. CAUTION: Use of controls, adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
Position And Reproduction
Of Labels
Bottom panel of the main unit
Note:
For security reasons, a numbered ID card is provided with this unit, and the same ID number is
imprinted on the unit’s chassis. Keep the card in a safe place, as it will help the authorities to
identify your unit if stolen.
Name/Rating plate
3
ENGLISH
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
BASIC OPERATIONS .................................................... 4
RADIO OPERATIONS ...................................................5
Listening to the radio ..................................................................... 5
Storing stations in memory ............................................................ 6
FM station automatic preset: SSM ............................................... 6
Manual preset.............................................................................. 7
Tuning into a preset station ........................................................... 8
Using RDS functions in the FM band ........................................... 9
RDS (Radio Data System) ...........................................................9
Other convenient tuner functions................................................ 16
Selecting FM reception sound....................................................16
CD OPERATIONS.......................................................17
Playing a CD ................................................................................. 17
Locating a track or a particular portion or a CD......................18
Selecting CD playback modes......................................................19
Other convenient CD functions ................................................... 19
Prohibiting CD ejection.............................................................. 19
SOUND ADJUSTMENTS .............................................20
Selecting preset sound modes ...................................................... 20
Adjusting the sound...................................................................... 21
Storing your own sound adjustments ......................................... 22
OTHER MAIN FUNCTIONS .........................................23
Setting the clock ............................................................................ 23
Storing your own mode settings .................................................. 25
Preferred setting mode cotrol .....................................................25
Turning on/off the key-touch tone (ONLY FOR KD-SX838R) ....26
Selecting the level display (ONLY FOR KD-SX838R/S737R) .... 26
Detaching the control panel ......................................................... 27
REMOTE OPERATIONS...............................................28
(ONLY FOR KD-SX838R)
Installing the batteries .................................................................. 28
Using the remote controller ......................................................... 28
CD CHANGER OPERATIONS ......................................29
(ONLY FOR KD-SX838R)
Playing CDs ................................................................................... 29
Selecting CD playback modes......................................................31
MAINTENANCE.........................................................32
Handling CDs ................................................................................ 32
TROUBLESHOOTING .................................................33
SPECIFICATIONS .......................................................34
4
1
Turn on the power.
2
Select the source.
To operate the tuner, see pages 5 – 16.
To operate the CD player, see pages 17 – 19.
ONLY FOR KD-SX838R:
To operate the CD changer, see pages 29 – 31.
3
Adjust the volume.
4
Adjust the sound as you want (see pages 20 – 22).
To drop the volume in a moment
Press
briefly while listening to any source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press
for more than 1 second.
BASIC OPERATIONS
Note:
When you use this unit for the
first time, set the built-in
clock correctly, see page 23.
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
KD-SX838R
KD-S737R/S707R
/ I /ATT
BAND
TUNER C DCD-
CH
F MA M C D
1
23
LOUD
Volume level appears.
Volume level indicator (see page 26).
5
ENGLISH
KD-SX838R
KD-SX838R
BAND
TUNER
KD-S737R/S707R
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching:
1 Select the band (FM or AM).
For KD-SX838R: Press TUNER/BAND repeatedly.
For KD-S737R/S707R: Press FM or AM.
2 Press and hold ¢
or 4
until “M” starts flashing on the display.
Now you can manually change the frequency while “M” is flashing.
3 Press ¢
or 4
repeatedly until the frequency you want is reached.
If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9kHz intervals for AM-MW/LW) until you release the button.
FM1 FM2 FM3 AM
F MA M
FM1
AM
FM2
FM3
KD-S737R/S707R
1
12
RADIO OPERATIONS
Listening to the radio
1
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
SSM
To search stations
of higher
frequencies.
To search stations
of lower
frequencies.
Audio level indicator (see page 26).
(ONLY FOR KD-SX838R/S737R)
6
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
1
Select the FM band number (FM1, FM2 or
FM3) you want to store FM stations into.
2
Press and hold both buttons for more than 3
seconds.
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3). These stations are preset in the number
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
BAND
TUNER
KD-SX838R
12
“SSM” appears, then disappears when
automatic preset is over.
FM1 FM2 FM3
FM1 FM2 FM3 AM
SSM
KD-S737R/S707R
F M
7
ENGLISH
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
1
Select the FM1 band.
2
Tune into a station of 88.3 MHz.
See page 5 to tune into a station.
3
Press and hold the button for more than 1
second.
4
Repeat the above procedure to store other stations into other
preset numbers.
Notes:
A previously preset station is erased when a new station is stored in the same preset number.
Preset stations are erased when the power supply to the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
BAND
TUNER
F M
Preset number “P1” starts flashing for a while.
KD-S737R/S707RKD-SX838R
12 3
SSM
12
8
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 6
and 7.
KD-S737R/S707R
1
Select the band (FM1, FM2, FM3 or AM) you
want.
2
Select the number (1 – 6) for the preset station
you want.
BAND
TUNER
123456
KD-SX838R
F MA M
FM1
AM
FM2
FM3
FM1 FM2 FM3 AM
KD-S737R/S707R
1
12
KD-SX838R
9
ENGLISH
RDS (Radio Data System)
Using RDS functions in the FM band
To select Network-Tracking mode, press the RDS button for more than 1
second.
Mode 1 (AF (Alternative Frequencies): on/REG: off):
Network-Tracking is activated.
Switches between stations belonging to the network being received.
Note:
In Mode 1, the broadcast may switch between different programmes
even within the same network at certain times.
Mode 2 (AF: on/REG: on):
Network-Tracking is activated and Regional mode is engaged (switches
between stations broadcasting the same programme, at all times).
Mode 3 (AF: off/REG: off):
Network-Tracking is deactivated.
RDS button
TP /RDS
Programme 1 broadcasting on
frequency B
Programme 1 broadcasting
on frequency A
Programme 1 broadcasting on frequency E
Programme 1 broadcasting on frequency D
Programme 1 broadcasting on frequency C
The same programme can be received on different frequencies.
Network-Tracking reception
When driving in an area where the signal strength drops, the tuner
automatically uses PI (Programme Identification) and AF codes to retune to
the same programme with a stronger signal from another RDS station in the
network. By utilizing these codes, you can continue to listen to the same
programme in its finest condition, no matter where you drive. (See illustration.)
When the RDS station to which you are tuned does not provide AF data or
the unit is unable to receive AF data for any reason, Network-Tracking
reception will NOT operate even when the signal strength drops below the
reference level.
10
1
Press the SEL button for more than 2 seconds
to enter the preferred setting mode (see page
25).
2
Press the ¢ or 4 button to select the
“PTY STBY” mode.
Each time the ¢ or 4 button is
pressed, the display changes as follows.
*Only for KD-SX838R
**Only for KD-SX838R/S737R
3
1
2
SEL
SSM
PTY standby mode
Storing your favourite programme type (PTY) into memory (NEWS is factory-preset.)
3
Press the + or – button to select one of 29
PTYs. (See the table on page 14.)
For example, when “CLASSICS” is selected in the display,
the classical music PTY is stored automatically.
Press the SEL button to return to the previous mode.
Ô
Ô Ô
Ô
Ô
Ô
Ô
Ô
Ô
Ô
*
*
**
11
ENGLISH
When the PTY button is briefly pressed in the FM mode,
the “PTY” indicator is lit during reception of a PTY station and the PTY
standby mode is engaged. The selected PTY name stored on page 10 (for
example: Classics) flashes for 5 seconds.
Note:
When the station being received is not a PTY station, the "PTY" indicator flashes.
Press the ¢
or 4 button to engage the PTY standby mode. "SEARCH"
appears in the display, and PTY station search starts. When a PTY station is tuned
in, “PTY” is lit.
If you are listening to a CD and wish to hear a selected PTY broadcast,
press the PTY button to enter the PTY standby mode. (The “PTY” indicator
lights up.)
If the PTY starts broadcasting while the PTY standby mode is active, the
selected PTY name is displayed and the FM mode is engaged. The se-
lected PTY can then be heard.
Note:
To deactivate the PTY standby mode, press the PTY button again.
When the TP button is pressed briefly in the FM mode, the “TP” indicator is
lit during reception of a TP station and the TA standby mode is engaged.
Note:
When the station being received is not a TP station, the TP indicator flashes. Press
the ¢
or 4 button to engage the TA standby mode. "SEARCH" appears in
the display, and TP station search starts. When a TP station is tuned in, “TP” is lit.
If you’re listening to a CD and wish to hear a TA broadcast, press the TP
button to enter the TA standby mode. (The “TP” indicator lights up.)
If a TA programme starts broadcasting while the TA standby mode is active,
“TRAFFIC” is displayed and the FM mode is engaged. The volume increases
to the preset "TA VOL" level and the TA programme can be heard (see page
15).
Note:
To deactivate the TA standby mode, press the TP button again.
TP (Traffic Programme) button
Setting and operating TA (Traffic Announcement) standby mode
PTY
TP / RDS
Setting and operating PTY standby mode
12
3
1
Press the SEL button for more than
2 seconds to enter the preferred set-
ting mode (see page 25).
2
Select the “PTY SRCH” mode with
the ¢
or 4 button.
Select the desired PTY with the + or – button (PTYs already stored
flash when they are selected), then press the required number button for
more than 2 seconds to store it. The stored PTY flashes in the display.
PTY search mode
Presetting PTYs in number buttons 1-6
The factory-presets are listed below.
POP M
1
2
3
4
5
6
CLASSICS
AFFAIRS
VARIED
ROCK M
EASY M
SEL
SSM
123456
3
1
2
13
ENGLISH
1
PTY search operation
Press and hold the PTY button for more than 1
second in the FM mode. PTY programme search
mode is engaged.
PTY
2
Recall a PTY stored on page 12 using a number button
(1-6).
Ex. When “CLASSICS” is stored in button 1.
123456
PTY station search starts after 5 seconds.
Successful programme search results in the desired PTY station being received so its
programme can be heard.
When a PTY station cannot be tuned in, the previous station is received.
After searching, the PTY selected last will be memorized, then displayed first when PTY
search is selected again.
Note:
There may be areas where PTY functions (PTY standby mode, PTY search) will not work.
2
1
14
PTY display
No.
No.
DISPLAY
DISPLAY
1
16
WEATHER
2
17
NEWS
3
18
AFFAIRS
4
19
INFO
5
20
SPORT
6
21
EDUCATE
7
22
DRAMA
8
23
CULTURE
9
24
SCIENCE
10
25
VARIED
11
26
POP M
12
27
ROCK M
13
28
EASY M
LIGHT M
14
29
CLASSICS
15
OTHER M
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
PTY codes
Descriptions of the PTY Codes
NEWS: News
AFFAIRS: Topical programmes expanding
on current news or affairs
INFO: Programmes which impart
advice on a wide variety of
topics.
SPORT: Sport events
EDUCATE: Educational programmes
DRAMA: Radio plays
CULTURE: Programmes on national or
regional culture
SCIENCE: Programmes on natural
sciences and technology
VARIED: Other programmes like comedies
or ceremonies
POP M: Pop music
ROCK M: Rock music
EASY M: Easy-listening music
LIGHT M: Light music
CLASSICS: Classical music
OTHER M: Other music
WEATHER: Weather information
FINANCE: Reports on commerce, trading,
the Stock Market, etc.
CHILDREN: Entertainment programmes for
children
SOCIAL: Programmes on social
activities
RELIGION: Programmes dealing with any
aspect of belief or faith, or the
nature of existence or ethics
PHONE IN: Programmes where people
can express their views either
by phone or in a public forum
TRAVEL: Programmes about travel
destinations, package tours,
and travel ideas and
opportunities
LEISURE: Programmes concerned with
recreational activities such as
gardening, cooking, fishing,
etc.
JAZZ: Jazz music
COUNTRY: Country music
NATION M: Current popular music from
another nation or region, in that
country’s language
OLDIES: Classic pop music
FOLK M: Folk music
DOCUMENT: Programmes dealing with factual
matters, presented in an
investigative style
15
ENGLISH
CT (Clock Time)
When CT data is received in the RDS signal,
the time is correctly renewed.
• RDS updates the local time according to
Greenwich Mean Time.
• When automatic renewal of clock time is
NOT required, follow the steps below.
1. Press the SEL button for more than 2
seconds to set the preferred setting mode.
2. Select “AUTO ADJ” with the ¢
or
4
button.
3. Press the “–” level control button and set to
“ADJ OFF”. (See page 25.)
Once these steps are completed, clock time
is not renewed even if the CT (Clock Time)
data is received with the RDS signal. When
you wish to reactivate this mode, repeat the
same procedure and in Step 3 press the “+”
Level Control button to set to “ADJ ON.” In
the activated mode, clock time is automatically
renewed when the CT data is received.
Note:
It takes at least 2 minutes to renew the time after
receiving CT data. The station must be received
for more than 2 minutes continuously, otherwise
the clock time will NOT be renewed.
Traffic information volume control
This function adjusts the volume of traffic
information broadcasts.
1. Press the SEL button for more than 2
seconds to set the preferred setting mode.
2. Select “TA VOL” with the ¢
or 4
button.
3. Set to the desired volume with the + or -
button. (See page 25.)
Number buttons
When a number button is pressed, if the
station with that frequency is broadcasting a
sufficiently strong signal, the receiver will tune
to that frequency.
When the signal strength is not sufficient for
good reception, by referring to the AF list, the
receiver searches for a station broadcasting
the same programme with a stronger signal.
If a station cannot be found in the AF list, PI-
seek tuning starts. If a station broadcasting
the same PI code cannot be detected in one
search-cycle, PI-seek tuning is released and
the original preset frequency is tuned to.
EON (Enhanced Other Networks)
• When tuning in a broadcasting station
transmitting EON data, the EON indicator
is lit and the following operations start.
EON automatically stores the frequencies
of stations from other networks transmitting
information codes (TP/TA/AF/PTY/PS
(Programme Service), etc.) so they can be
mutually used. The following points have
been improved:
When listening to a station NOT transmitting
traffic information or the selected PTY for
example, EON automatically tunes to a station
in a local network when this information is
broadcast and then switches back to the
original programme when the broadcast ends.
(However, it does not switch back to the
original programme if the broadcast continues
for a long time.) The transmitted information
(AF and other codes) is constantly and
automatically updated so that preset
programme information can be heard
immediately even if in a different network area.
Other RDS functions
16
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The sound you
hear becomes monaural but reception will be improved.
To restore the stereo effect, press the same button again.
Lights up when receiving an FM broadcast in stereo.
Other convenient tuner functions
ST
MO
Display Button
The DISP button is used to select the
Operation (Tuner or CD) and Clock modes.
Each time the button is pressed, the display
changes as follows:
Operation mode (Station name* = Frequency
being received = PTY; or CD) = Clock time.
The display returns to the initially preset mode
after a short while.
* When the RDS or PTY signal is weak or
when not tuned to an RDS or PTY station,
the Station name or PTY is NOT displayed.
Display Mode
Setting the main display mode.
1. Press the SEL button for more than 2
seconds to set the preferred setting mode.
2. Select “DISPMODE” with the ¢
or
4
button.
3. Select the desired mode with the + or -
button.
(Station name (PS NAME) Ô Frequency
being received (FREQ) Ô Clock time
(CLOCK) Ô) (See page 25.)
Note:
When the “CLOCK” mode is set, clock time
remains on the main display even during playback.
MO/RND
17
ENGLISH
1
1
Insert a disc into the loading slot.
The unit turns on, draws a CD and starts playback
automatically.
When a CD is inserted upside down, “NO DISC” appears
on the display and the CD automatically ejects.
To stop play and eject the CD
Press 0.
CD play stops and the CD automatically ejects from the loading slot.
If you change the source to AM/FM (or CD changer for KD-SX838R only), the CD play also
stops (without ejecting the CD this time).
If the ejected disc is not removed for about 15 seconds , the disc is automatically inserted again into
the loading slot to protect it from dust. (CD play will not start this time.)
You can eject the CD even when the unit is turned off.
CAUTION on Volume Setting
CDs produces very little noise compared with other sources. If the volume level is adjusted
for the tuner, for example, the speakers may be damaged by the sudden increase in the
output level. Therefore, lower the volume before playing a CD and adjust it as required
during playback
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing CD turns on the unit and starts playback
automatically.
CD OPERATIONS
Playing a CD
Total track number
of the inserted disc
Elapsed playing
time
Current trackTotal playing time of
the inserted disc
18
Locating a track or a particular portion on a CD
To fast forward or reverse the track
Press and hold ¢
, while playing a CD, to fast forward the track.
Press and hold 4
, while playing a CD, to reverse the track.
To go to the next track or the previous track
Press ¢
briefly, while playing a CD, to go ahead to the beginning of
the next track. Each time you press the button consecutively, the beginning
of the next track is located and played back.
Press 4
briefly, while playing a CD, to go back to the beginning of the
current track. Each time you press the button consecutively, the beginning
of the previous track is located and played back.
To go to a particular track directly
Press the number button corresponding to the track number to start its
playback.
To select a track number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
Number buttons
¢
4
SSM
78 9101112
123456
SSM
19
ENGLISH
RPT
Selecting CD playback modes
To play back tracks at random (Random Play)
You can play back all tracks on the CD at random.
Each time you press MO/RND (Mono/Random) while playing a CD, CD
random play mode turns on and off alternatively.
When the random mode is turned on, the RND indicator lights up on the
display and a track randomly selected starts playing.
To play back tracks repeatedly (Repeat Play)
You can play back the current track repeatedly.
Each time you press RPT (Repeat) while playing a CD, CD repeat play
mode changes turns on and off alternatively.
When the repeat mode is turned on, the RPT indicator lights up on the
display.
MO
RND
RPT
MO/
RND
RPT
RND
Other convenient CD functions
Prohibiting CD ejection
You can prohibit the CD ejection and can “lock” a CD in the loading slot.
Press and hold CD and 0 for more than 2 seconds. “EJECT” flashes on the display for about
5 seconds, and the CD is “locked.”
To cancel the prohibition and “unlock” the CD, press and hold CD and 0 for more than 2
seconds again. “EJECT” appears on the display, and the CD ejects from the loading slot.
Track number of the currently playing track
20
SOUND
SOUND
SOUND ADJUSTMENTS
Selecting preset sound modes
You can select a preset sound adjustment suitable to the music genre:
Each time you press SOUND, the sound mode changes as follows.
Indication For: Preset values
Bass Treble Loudness
SCM OFF (Flat sound) 00 00 On
BEAT Rock or disco music +2 00 On
SOFT Quiet background music +1 –3 Off
POP Light music +4 +1 Off
Notes:
You can adjust the preset sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”
on page 22.
To adjust only the bass and treble reinforcement levels to your preference, see “Adjusting the sound”
on page 21.
21
ENGLISH
1
Select the item you want to adjust.
Indication To do: Range
BAS Adjust the bass –6 (min.) — +6 (max.)
(Bass)
TRE Adjust the treble –6 (min.) — +6 (max.)
(Treble)
FAD Adjust the front and rear speaker R6 (rear only) — F6 (front only)
(Fader)* balance
BAL Adjust the left and right speaker L6 (left only) — R6 (right only)
(Balance) balance
LOUD Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
VOL Adjust the volume 00 (min.) — 50 (max.)
(Volume)
12
SEL
Note:
* If you are using a two-speaker system, set the fader level to “00” (center).
2
Adjust the level.
Press the + button to turn on the loudness function, and the
– button to turn it off.
Note:
Normally the + and – buttons work as the volume control buttons. So
you do not have to select “VOL” to adjust the volume level.
Adjusting the sound
You can adjust the sound characteristics to your preference.
(Loudness)
ON — OFF
22
1
Call up the sound mode you want to adjust.
See page 20 for details.
2
Select "BAS", "TRE" or "LOUD".
3
Adjust the bass or treble level or turn the
loudness function ON/OFF.
See page 21 for details.
4
Press and hold SOUND until the sound mode
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 20.
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 20) to your preference and
store your own adjustments in memory.
SOUND
Within
5 seconds
SEL
Within
5 seconds
Within
5 seconds
SOUND
2 3 1, 4
23
ENGLISH
1
Press and hold the button for more than
2 seconds to set the preferred setting mode.
(See page 25.)
2
Set the hour.
1. Select “CLOCK H” if not shown on the
display.
2. Adjust the hour.
Selecting 24-hour or 12-hour clock display
(Set to 24-hour at the factory)
1. Press the SEL button for more than 2 seconds to set the preferred setting
mode (See page 25.).
2. Select the “24H/12H” mode with the ¢
or 4 button.
3. Select 24H or 12H with the level control buttons (+,–).
How to select the clock mode as the main display mode
1. Press the SEL button for more than 2 seconds to set the preferred setting
mode (See page 25.).
2. Select “DISPMODE” with the ¢
or 4 button.
3. Select “CLOCK” with the level control buttons (+,–).
With the clock display mode selected, when any other operation button is pressed, the dis-
play mode of the source you selected is shown.
After a few seconds, the display returns to the clock mode.
OTHER MAIN FUNCTIONS
Setting the clock
SEL
1
2
SSM
1
2
24
4
Start the clock.
SSM
4
3
To check the current clock time (changing the display mode)
Press DISP repeatedly. Each time you press the button, the display mode changes as follows
If the unit is not in use when you press DISP, the power turns on, the clock time is shown for
5 seconds, then the power turns off.
3
DISP
12
Set the minute.
1. Select “CLOCK M”
2. Adjust the minute.
During tuner operation:
Clock
Frequency
During CD operation:
Clock Disc
number
Elapsed
playing time
(See page 16 when RDS is on.)
25
ENGLISH
Preferred setting mode control
This mode has been set at the factory, but it can be set to suit your needs.
Storing your own mode settings
Hour adjustment
Minute adjustment
24/12-hour time
display
Automatic setting
of the clock
SSM
Select.
SEL
12H
ADJ OFF
PS NAME
FREQ
24H
ADJ ON
Set.
0:00
24H
ADJ ON
Factory-preset
settings
See page
15
23
2
3
1
Back Advance
Back Advance
Press the SEL button when you have finished setting to return to the previous mode.
PTY search
PTY standby
Traffic announcement
volume
Key-touch tone
(only for KD-SX838R)
Changer display
(only for KD-SX838R)
VOL (00-50)
OFF
VOL (20)
AUDIO
10-11
12-13
11, 15
26
29 programme types
(See page 14.)
NEWS
NEWS
CLOCK
Display mode
PS NAME
16
Press the SEL button for
more than 2 seconds to set
the preferred setting mode.
1
SEL
123
2 3
Select each
mode.
Set the de-
sired mode.
SSM
TIME
DISC
DISC
29
23-24
26
Level display
(only for KD-SX838R/S737R)
OFF (volume)
AUDIO (signal)
VOL (00-50)
ON ON
26
1
Press and hold the button for more than 2
seconds to set the preferred setting mode (see
page 25).
2
Select “BEEP” if not shown on the display.
3
Turning on/off the key-touch tone
This function is ONLY FOR KD-SX838R.
You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. (When shipped from the factory, the key-touch tone is activated.)
SEL
You can select the level display according to your preference.
1. Press the SEL button for more than 2 seconds to set the preferred setting mode.
2. Select “LEVEL” with the ¢
or 4 button.
3. Select the desired mode with the + or - button.
Volume level (OFF) Ô Signal level (AUDIO) (see page 25)
Selecting the level display (only for KD-SX838R/S737R)
SSM
To deactivate the key-touch tone (OFF).
To activate the key-touch tone (ON).
123
27
ENGLISH
How to detach the control
panel
Before detaching the control panel, be sure
to turn off the power.
1
Unlock the control panel.
2
Lift and pull the control panel
out of the unit.
3
Put the detached control
panel into the provided case
(only for KD-SX838R/
S737R).
How to attach the control
panel
1
Insert the left side of the
control panel into the groove
on the panel holder.
2
Press the right side of the
control panel to fix it to the
panel holder.
Detaching the control panel
You can detach the control panel when leaving the car.
When detaching or attaching the control panel, be careful not to damage the connectors on
the back of the control panel and on the panel holder.
Note on cleaning the connectors:
If you frequently detach the control panel, the
connectors will deteriorate.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
Connectors
28
Using the remote controller
1 Functions the same as the
button on the main unit.
2 Select the source.
Each time you press FUNC (function), the source changes.
3 Functions as the +/– buttons on the main unit.
Does not function for the preferred setting mode adjustment.
4 Functions as the BAND button while listening to the radio.
Each time you press the button, the band changes.
Functions as the DISC + button while listening to the CD
changer.
Each time you press the button, the disc number increases,
and selected disc starts playing.
Does not function as the PROG button.
5 Functions as the PRESET button while listening to the radio.
Each time you press the button, the preset station number
increases, and selected station is tuned in.
Functions as the DISC – button while listening to the CD
changer.
Each time you press the button, the disc number decreases,
and selected disc starts playing.
6 Searches stations while listening to the radio.
Fast forwards or reverses the track if pressed and held
while listening to the CD.
Skips to the beginning of the next tracks or go back to the
beginning of the current (or previous tracks) if pressed
briefly while listening to the CD.
This section is ONLY FOR KD-SX838R.
Before using the remote controller:
Aim the remote controller directly at the remote sensor
on the main unit. Make sure there is no obstacle in
between.
Do not expose the remote sensor to strong light (direct
sunlight or artificial lighting).
REMOTE OPERATIONS
Remote sensor
Installing the batteries
R03(UM-4)/AAA(24F)
Insert the ·
ends first.
When the controllable
range or effectiveness of
the remote controller
decreases, replace the
batteries – R03(UM-4)/
AAA(24F).
ATT
FUNC
BAND
PROG
PRESET
DISC
DISC
14
5
6
2
3
29
ENGLISH
1
1
Select the CD automatic changer.
Playback starts from the first track of the first disc.
All tracks of all discs are played back.
This section is ONLY FOR KD-SX838R, when used with a JVC CD automatic changer
(separately purchased).
We recommend that you use one of the CH-X series with your KD-SX838R.
If you have another CD automatic changer, consult your JVC IN-CAR ENTERTAINMENT
dealer for connections.
For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-
U15K) for connecting it to this unit.
Before operating your CD automatic changer:
Refer also to the Instructions supplied with your CD changer.
If no discs are in the magazine of the CD changer or the discs are inserted upside
down, “NO CD” or “NO DISC” will appear on the display. If this happens, remove the
magazine and set the discs correctly.
If “RESET 1 - RESET 8” appears on the display, something is wrong with the connection
between this unit and the CD changer. If this happens, check the connection, connect
the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.
CD CHANGER OPERATIONS
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
Playing CDs
Number buttons
CD-
CH
"DISC" or "TIME" can be selected in the preferred setting mode control
(see page 25).
Track numberDisc number
Elapsed playing time
When "TIME" is selected
When "DISC" is selected
¢
4
30
To fast forward or reverse the track
Press and hold ¢
, while playing a CD, to fast forward the track.
Press and hold 4
, while playing a CD, to reverse the track.
To go to the next track or the previous track
Press ¢
briefly, while playing a CD, to go ahead to the beginning of
the next track. Each time you press the button consecutively, the beginning
of the next track is located and played back.
Press 4
briefly, while playing a CD, to go back to the beginning of the
current track. Each time you press the button consecutively, the beginning
of the previous track is located and played back.
To go to a particular disc directly
Press the number button corresponding to the disc number to start its
playback (while the CD changer is playing).
To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1 second.
SSM
78 9101112
123456
SSM
Track number
Disc number
Ex. When disc number 3 is selected
31
ENGLISH
To play back tracks at random (Random Play)
Each time you press MO/RND (Mono/Random) while playing a CD, CD
random play mode changes as follows:
Mode RND Indicator Plays at random
RND1 Lights All tracks of the current disc, then the tracks of the
next disc, and so on.
RND2 Flashes All tracks of all discs inserted in the magazine.
To play back tracks repeatedly (Repeat Play)
Each time you press RPT (Repeat) while playing a CD, CD repeat play
mode changes as follows:
Mode RPT Indicator Plays repeatedly
RPT1 Lights The current track (or specified track).
RPT2 Flashes All tracks of the current disc (or specified disc).
Selecting CD playback modes
RPT1 RPT2 Canceled
(Repeat1) (Repeat2)
RPT
MO/
RND
MO
RND
RPT
RND1 RND2 Canceled
(Random1) (Random2)
32
MAINTENANCE
Handling CDs
This unit has been designed only to reproduce the CDs bearing the mark.
Other discs cannot be played back.
How to handle CDs
When removing a CD from its case, press down the center holder of
the case and lift the CD out, holding it by the edges.
Always hold the CD by the edges. Do not touch its recording surface.
When storing a CD into its case, gently insert the CD around the
center holder (with the printed surface facing up).
Make sure to store CDs into the cases after use.
To keep CDs clean
A dirty CD may not play correctly. If a CD does becomes dirty, wipe it with
a soft cloth in a straight line from center to edge.
To play new CDs
New CDs may have some rough spots around the inner and outer edges.
If such a CD is used, this unit may reject the CD.
To remove these rough spots, rub the edges with a pencil or ball-point
pen, etc.
Moisture condensation
Moisture may condense on the lens inside the CD player in the following cases:
After starting the heater in the car.
If it becomes very humid inside the car.
Should this occur, the CD player may malfunction. In this case, eject the CD and leave the
unit turned on for a few hours until the moisture evaporates.
CAUTIONS:
Do not insert 8cm (3 3/16") CDs (single CDs) into the loading slot. (Such CDs cannot be
ejected.)
Do not insert any CD of unusual shape – like a heart or flower; otherwise, it will cause a
malfunction.
Do not expose CDs to direct sunlight or any heat source or place them in a place subject to high
temperature and humidity. Do not leave them in a car.
Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.)
to clean CDs.
Center holder
About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the
unit and the CD, but will be annoying.
We recommend that you stop CD play while driving on such rough roads.
COMPACT
DIGITAL AUDIO
33
ENGLISH
What appears to be trouble is not always serious. Check the following points before calling a
service centre.
Symptoms
CD cannot be played back.
CD sound is sometimes
interrupted.
Sound cannot be heard from
the speakers.
SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Static noise while listening
to the radio.
“NO CD” or “NO DISC”
appears on the display.
“RESET 8” appears on the
display.
“RESET 1-RESET 7”
appears on the display.
CD can be neither played
back nor ejected.
The unit does not work at
all.
Remedies
Insert the CD correctly.
Stop CD play while driving on
rough roads.
Change the CD.
Check the cords and
connections.
Adjust it to the optimum level.
Check the cords and
connections.
Store stations manually.
Connect the antenna firmly.
Insert CD.
Insert it correctly.
Connect this unit and the CD
changer correctly and press
the reset button of the CD
changer.
Press the reset button of the
CD changer.
Press
and 0 at the
same time for more than 2
seconds. Be careful not to
drop CD when it is ejected.
Press
and SEL at
the same time for more than 2
seconds to reset the unit. (The
clock setting and preset
stations stored in memory are
erased.)
Causes
CD is inserted upside down.
You are driving on rough
roads.
CD is scratched.
Connections are incorrect.
The volume control is turned
to the minimum level.
Connections are incorrect.
Signals are too weak.
The antenna is not connected
firmly.
No CD is in the loading slot (or
in the magazine).
CD is inserted incorrectly.
This unit is not connected to a
CD changer correctly.
The CD player may function
incorrectly.
The built-in microcomputer
may function incorrectly due to
noise, etc.
TROUBLESHOOTING
34
AUDIO AMPLIFIER SECTION
FOR KD-SX838R/S737R:
Maximum Power Output:
Front: 40 watts per channel
Rear: 40 watts per channel
Continuous Power Output (RMS):
Front: 16 watts per channel into 4 , 40
to 20,000 Hz at no more than 0.8%
total harmonic distortion.
Rear: 16 watts per channel into 4 , 40
to 20,000 Hz at no more than 0.8%
total harmonic distortion.
FOR KD-S707R:
Maximum Power Output:
Front: 35 watts per channel
Rear: 35 watts per channel
Continuous Power Output (RMS):
Front: 15 watts per channel into 4 , 40
to 20,000 Hz at no more than 0.8%
total harmonic distortion.
Rear: 15 watts per channel into 4 , 40
to 20,000 Hz at no more than 0.8%
total harmonic distortion.
FOR KD-SX838R/S737R/S707R:
Load Impedance: 4 (4 to 8 allowance)
Tone Control Range
Bass: ±10 dB at 100 Hz
Treble:±10 dB at 10 kHz
Frequency Response: 40 to 20,000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance: 2.0 V/20 k load
(full scale) (KD-SX838R/S737R only)
Output Impedance: 1 k
TUNER SECTION
Frequency Range
FM: 87.5 to 108.0 MHz
AM: (MW) 522 to 1,620 kHz
(LW) 144 to 279 kHz
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 )
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 )
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 to 15,000 Hz
Stereo Separation: 30 dB
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
CD PLAYER SECTION
Type: Compact disc player
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Number of channels: 2 channels (stereo)
Frequency Response: 5 to 20,000 Hz
Dynamic Range: 96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
GENERAL
Power Requirement
Operating Voltage: DC 14.4 volts (11 to 16
volts allowance)
Grounding System: Negative ground
Dimensions (W x H x D)
Installation Size:
182 x 52 x 150 mm
Panel Size: 188 x 58 x 14 mm
Mass: 1.3 kg (2.9 lbs) (excluding accessories)
Design and specifications subject to change
without notice.
SPECIFICATIONS
VICTOR COMPANY OF JAPAN, LIMITED
Printed in Singapore
1297MNMUIAJES
EN, GE, FR, NL
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC kd s 737 r bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC kd s 737 r in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info