136123
76
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
76
CORRECTIVE ACTION
Re-perform the clock and/or timer
settings.
Press and confirm that "" is
displayed on the display panel.
Set the channel position other than
"F-1" before engaging to Timer-
Standby mode.
Timer programming can’t be
performed while a timer recording is
in progress. Wait until it finishes.
VHS deck
Load a cassette with the Record
Safety tab intact, or cover the hole
using adhesive tape.
DV deck
Load a cassette with the erase
protection switch set to "REC".
Remove the cassette and cover the
hole with adhesive tape, or insert a
cassette with the Record Safety tab
intact.
Remove the cassette and set the erase
protection switch to "REC".
SYMPTOM
1. Timer recording won’t work.
2. Timer programming is not possible.
3. "" and "]" on the display panel
won’t stop blinking.
4. The cassette is automatically
ejected, and "" and "]" on the
display panel won’t stop blinking.
POSSIBLE CAUSE
The clock and/or the timer have
been set incorrectly.
The timer is not engaged.
Timer Recording may not work
when the recorders input mode is
set to "F-1" for recording on the DV
deck, because the recorder is
waiting for the signals through DV
IN/OUT (i.Link) connector.
Timer recording is in progress.
The timer is engaged but there’s no
cassette loaded.
VHS deck
The loaded cassette has had its
Record Safety tab removed.
DV deck
The loaded cassette has had its erase
protection switch set to "SAVE".
TIMER RECORDING
CORRECTIVE ACTION
Confirm that the camcorder is
properly connected.
Set the input mode to "L-1", "L-2" or
"F-1".
Set "SOUND MODE" to "12BIT" at
the original recording ( pg. 35).
Set the tape speed to SP (DV cassette)
or SP/LP (VHS/S-VHS cassette) at the
original recording.
Monitor the sound using the
connected devices.
Perform Random Assemble Editing
again.
Dubbing from the NTSC tape to the
Mini DV tape is not possible.
Dubbing from the NTSC tape to the
Mini DV tape is not possible.
POSSIBLE CAUSE
The camcorder has not been
properly connected.
The input mode is not correct.
"SOUND MODE" on the DV Mode
Set Menu had been set to "16BIT" at
the original recording.
The tape speed had been set to LP
(DV cassette) or EP (VHS/S-VHS
cassette) at the original recording.
This is normal.
The memory backup time has
expired.
This is normal.
The NTSC tape is played back on
the VHS deck.
The NTSC tape is played back on
the VHS deck.
SYMPTOM
4. Camcorder recording is not
possible.
5. Audio dubbing is not possible.
6. Monitoring the audio-dubbed
sound is not possible during audio
dubbing using the DV deck.
7. The programmed memory of
Random Assemble Editing is
disappeared.
8. When performing Tape Dubbing,
the beginning of the dubbing start
point is not dubbed.
9. When starting Tape Dubbing, the
recorder stops dubbing after a few
seconds and ejects both the VHS
and Mini DV tapes.
10.When starting Normal Dubbing,
the recorder stops dubbing after a
few seconds.
RECORDING
SUBSIDIARY INFORMATION (cont.)
76

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC hr dvs 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC hr dvs 2 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info