149447
1
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
AV28WT5EK/AV24WT5EK
LCT0899-001B-U
0101-T-CR-JMUK
©2001 VICTOR COMPANY OF JAPAN, LIMITED
AV28WT5EK
AV24WT5EK
Contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
T-V LINK functions. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using your TV–the basics . . . . . . . . . . . . . . . . . . . . . 8
Remote control buttons and functions
. . . . . . . . . . . . 11
Using the TV’s menus . . . . . . . . . . . . . . . . . . . . . . . 16
Picture setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Picture features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Sound setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
EXT SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Other menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Further preparation . . . . . . . . . . . . . . . . . . . . . . . . . 30
TV buttons and parts . . . . . . . . . . . . . . . . . . . . . . . . 32
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Colour Television
INSTRUCTIONS
AV32EK_cover.fm Page 1 Wednesday, January 17, 2001 1:53 PM
5
Thank you for buying this colour television.
To make sure you fully understand how to use your new TV, please read this manual thoroughly before you begin.
6DIHW\#SUHFDXWLRQV
6DIHW\#SUHFDXWLRQV6DIHW\#SUHFDXWLRQV
6DIHW\#SUHFDXWLRQV
:DUQLQJ
:DUQLQJ:DUQLQJ
:DUQLQJ
To prevent fire or shock hazard, do not expose this
appliance to rain or moisture.
&DXWLRQ
&DXWLRQ&DXWLRQ
&DXWLRQ
To ensure personal safety, observe the following rules
regarding the use of this unit.
1 Operate only from the power source specified (AC 220
240 V, 50 Hz) on the unit.
2 Avoid damaging the AC plug and power cord.
3 Avoid improper installation and never position the unit
where good ventilation is unattainable.
When installing this television, distance recommendations
must be maintained between the floor and wall, as well as
instalment in a tightly enclosed area or piece of furniture.
Please adhere to the minimum distance guidelines shown
for safe operation.
4 Do not allow objects or liquid into the cabinet openings.
5 In the event of a fault, unplug the unit and call a service
technician. Do not attempt to repair it yourself or remove
the rear cover.
6 The surface of the TV screen is easily damaged. Be very
careful with it when hendling the TV.
Should the TV screen become soiled, wipe it with a soft dry
cloth. Never rub it forcefully. Never use any cleaner or
detergent on it.
7 When you don’t use this TV set for a long period of time, be
sure to disconnect the power plug from the AC outlet.
8 Do not hold the front panel door when moving the TV, if you
do you may break it.
:DUQLQJ
:DUQLQJ:DUQLQJ
:DUQLQJ
DO NOT cut off the mains plug from this equipment. If the
plug fitted is not suitable for the power points in your home or
the cable is too short to reach a power point, then obtain an
appropriate safety approved extension lead or adaptor or
consult your dealer.
If nonetheless the mains plug is cut off, remove the fuse and
dispose of the plug immediately, to avoid a possible shock
hazard by inadvertent connection to the mains supply.
If a new mains plug has to be fitted, then follow the instruction
given below:
Important
Do not make any connection to the larger terminal which is
marked with the letter E or by the safety earth symbol or
coloured green or green-and-yellow.
The wires in the mains lead on this product are coloured in
accordance with the following code:
Blue: Neutral
Brown: Live
As these colours may not correspond with the coloured
marking identifying the terminals in your plug proceed as
follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
When replacing the fuse only a correctly rated approved type
should be used and be sure to re-fit the fuse cover.
If in doubt — consult a competent
electrician.
How to replace the fuse
Open the fuse compartment
with a blade screwdriver, and
replace the fuse.
15 cm
10 cm 10 cm 15 cm
Fuse
AV32EK_WARNING.fm Page 2 Wednesday, January 17, 2001 9:28 AM
6
*XLGHOLQHV#IRU#VDIH#RSHUDWLRQ
*XLGHOLQHV#IRU#VDIH#RSHUDWLRQ*XLGHOLQHV#IRU#VDIH#RSHUDWLRQ
*XLGHOLQHV#IRU#VDIH#RSHUDWLRQ
This equipment has been designed and manufactured to comply with international safety standards. However, as with any
electrical appliance, care must be taken to ensure optimal results and operational safety.
Before attempting to use this equipment, read the operating instructions thoroughly.
Ensure that all electrical connections (including the mains plug, extension leads, etc.) have been made in accordance with the
manufacturer’s instructions.
If ever in doubt about the installation, operation or safety of this equipment, consult your dealer.
Handle all glass panels or covers with care.
Never operate this equipment if it appears damaged or operates abnormally. Turn the power off, disconnect the main power
plug and consult your dealer.
Never remove any affixed panels or covers. Doing so may result in electrical shock.
Never leave this equipment operating unattended unless otherwise specifically stated that it is designed to do so or in standby
mode. Only use the designated power switch to turn off the power and ensure that all potential users are instructed how to do
so. Make special arrangements for infirm or handicapped persons.
Never watch TV while operating a motor vehicle. It is illegal to watch TV while driving.
Never listen to headphones at high volume. Doing so may damage your hearing.
Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in a malfunction or damage.
Never use makeshift stands or attempt to affix legs with wood screws. When using a manufacturer’s approved stand or legs,
use only the fixtures provided and follow the installation instructions.
Never allow this equipment to be exposed to rain or moisture.
Never allow anyone, especially children, to insert anything into an opening in the case. Doing so may result in a fatal electrical
shock.
Never guess or take chances with electrical equipment of any kind. It is better to be safe than sorry.
AV32EK_WARNING.fm Page 3 Wednesday, January 17, 2001 9:28 AM
7
6HWWLQJ#XS#\RXU#79
6HWWLQJ#XS#\RXU#796HWWLQJ#XS#\RXU#79
6HWWLQJ#XS#\RXU#79
&RQQHFWLQJ#WKH#DHULDO#DQG#YLGHR#FDVVHWWH#UHFRUGHU#+9&5,
&RQQHFWLQJ#WKH#DHULDO#DQG#YLGHR#FDVVHWWH#UHFRUGHU#+9&5,&RQQHFWLQJ#WKH#DHULDO#DQG#YLGHR#FDVVHWWH#UHFRUGHU#+9&5,
&RQQHFWLQJ#WKH#DHULDO#DQG#YLGHR#FDVVHWWH#UHFRUGHU#+9&5,
If you are connecting a VCR, follow A
B
C
D in the
diagram opposite.
If you are not connecting a VCR, follow 1
2.
For more details, see the manuals that came with the
equipment you want to connect.
The connecting cables are not provided.
You can watch a video using the VCR without doing C.
For details, see your VCR instruction manual.
To connect more equipment, please see “Further
preparation” on page 30.
If you connect a decoder to a T-V LINK compatible VCR,
set the DECODER (EXT-2) function to ON. For details, see
“Using the DECODER (EXT-2) function” on page 29.
Otherwise, you will not be able to watch scrambled
channels.
To use the T-V LINK functions, you must have a T-V LINK
compatible VCR connected by a SCART cable C to the EXT-
2 terminal on the TV. For details about T-V LINK functions,
see “T-V LINK functions” on page 7.
3XWWLQJ#EDWWHULHV#LQWR#WKH#UHPRWH#FRQWURO
3XWWLQJ#EDWWHULHV#LQWR#WKH#UHPRWH#FRQWURO3XWWLQJ#EDWWHULHV#LQWR#WKH#UHPRWH#FRQWURO
3XWWLQJ#EDWWHULHV#LQWR#WKH#UHPRWH#FRQWURO
Use two AAA/R03 dry cell batteries.
Insert the batteries holding from the ó end, making sure the
ô and ó terminals are correctly lined up.
To open the battery compartment, slide the door downwards
and lift off. Replace the door by sliding it upwards until it
fastens into place.
Follow the warnings printed on the batteries.
Battery life is about six months to one year, depending on
how much you use the remote control.
If the remote control does not work properly, fit new
batteries.
The batteries we supply are only for setting up and
testing your TV. Please replace them as soon as you
need to.
Always use good-quality batteries.
EXT-1
EXT-2
EXT-3
SS
EXT-1
EXT-2
EXT-3
SS
VCR
UHF aerial
75-ohm coaxial
cable
aerial plug
Mains outlet
(AC 220 - 240 V,
50 Hz)
21-pin SCART Cable
aerial
plug
75-ohm
coaxial
cable
aerial plug
AV IN/OUT
terminal
to aerial
output
To Aerial
Input
power
Cord
WFT1EK_E1.fm Page 4 Wednesday, January 17, 2001 9:29 AM
8
Setting up your TV
,QLWLDO#VHWWLQJV
,QLWLDO#VHWWLQJV,QLWLDO#VHWWLQJV
,QLWLDO#VHWWLQJV
When the TV is first turned on, it goes into the initial setting
mode, and you will see the JVC logo. Follow the instructions
on the screen to make the initial settings.
1
Press the main power button on the TV
The power lamp lights red (for power on), then green (for
TV on) and the JVC logo is appears.
If the power lamp stays red and does not change to
green:
your TV is in the standby mode. Press the
=
(standby) button on the remote control to turn your
TV on.
If the JVC logo does not appear this is because your
TV has already been turned on for the first time:
use the “LANGUAGE” and “AUTO PROGRAM”
functions to make the initial settings. For details, see
“INSTALL” on page 24.
2
Press the
3
33
3
button
The LANGUAGE menu appears.
3
Press the ë
ëë
ë buttons to choose
ENGLISH
The on-screen display will then be in English.
1 2 3
4 5 6
7 8
9
0
P
AV
TV OK
MENU
P
TV
main power button
power lamp
WFT1EK_E1.fm Page 5 Wednesday, January 17, 2001 9:29 AM
9
Setting up your TV
To receive SKY 1 you need a satelite tuner. You must have
the satellite tuner set to SKY 1 before starting the AUTO
PROGRAM function which follows.
4
Press the
3
33
3
button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears and the TV
channels you receive are automatically stored in the
programme numbers list (PR).
To cancel the AUTO PROGRAM function:
Press the
4
44
4
button.
5
After the TV channels have been
registered in the programme numbers
list (PR), the EDIT menu appears
If you want to, you can now edit the programme numbers
(PR) using the EDIT/MANUAL function. For details, see
“EDIT/MANUAL” on page 25.
If you do not want to edit programme numbers (PR), go
to the next step.
6
Press the
3
33
3
button to display the
T-V LINK menu
7
Follow the T-V LINK menu according
to the type of VCR you have connected
to the EXT-2 terminal
If you do not have a T-V LINK compatible VCR
connected:
Press the
4
44
4
button to leave the T-V LINK menu.
The T-V LINK menu disappears.
If you have a T-V LINK compatible VCR
connected:
Follow the operating procedure “Downloading data to a
VCR” on page 29 to transmit the programme number
(PR) data.
8
Now, the initial settings are complete,
and you can watch the TV
Note:
BBC1, BBC2, ITV, Channel 4 and Channel 5 are
automatically set to programme numbers PR 1 to PR
5. SKY 1 is set to programme number PR 6, but no
TV channel name (ID) is set. If the TV doesn’t receive
one of these TV channels, that programme number
(PR) will not be set.
If a TV channel you want to view is not set to a
programme number (PR), you can set it using the
MANUAL function. For details, see “EDIT/MANUAL”
on page 25.
The AUTO PROGRAM function does not set the
programme number PR 0 (AV) for your video
cassette recorder. You will need to set this using the
MANUAL function.
In some areas you may get TV reception from more
than one transmitter, for example different ITV
regions. In this case each TV channel could be set
twice. If this happens, the first set of channels will
have the stronger signal. If you want to delete the
second set of channels, you will have to do it
manually (see page 27).
If you have had any problems setting up
your new TV, please call the Helpline at
0870 330 5000
Enjoy your new TV!
WFT1EK_E1.fm Page 6 Wednesday, January 17, 2001 9:29 AM
:
709#/,1.#IXQFWLRQV
709#/,1.#IXQFWLRQV709#/,1.#IXQFWLRQV
709#/,1.#IXQFWLRQV
When you have a T-V LINK compatible VCR connected to the
EXT-2 Terminal on the TV, it is easier to set up the VCR and
to view videos. T-V LINK uses the following features:
3UH0VHW#GRZQORDG
3UH0VHW#GRZQORDG3UH0VHW#GRZQORDG
3UH0VHW#GRZQORDG
The VCR will automatically download the registered data on
the TV channels from the TV. This means you do not need to
set up the program channels on your VCR manually.
The preset download function automatically begins when the
initial setting is complete or whenever you carry out the AUTO
PROGRAM or EDIT/MANUAL functions.
You can also carry out this function using your VCR controls.
When “FEATURE NOT AVAILABLE” is displayed:
If “FEATURE NOT AVAILABLE” is displayed, the download
was not performed correctly. Before trying to download again,
check that:
the VCR power is turned on
the VCR is T-V LINK compatible
the VCR is connected to the EXT-2 terminal
the SCART cable is fully wired.
'LUHFW#5HF
'LUHFW#5HF'LUHFW#5HF
'LUHFW#5HF
“What You See Is What You Record”
You can easily record to VCR the images that you are
watching on the TV.
For details, read the manual for your VCR.
Use your VCR controls. “VCR IS RECORDING” is displayed.
In the following situations, the VCR will stop recording if
the TV is turned off, if the TV channel or input is changed,
or if the menu is displayed on the TV:
when recording images from an external device connected
to the TV (for example a camcorder)
when recording a TV channel after it has been unscrambled
on a decoder
when recording a TV channel by using the TV’s output
because the VCR’s own tuner cannot properly receive that
channel
You cannot carry out Direct Rec using your TV’s control.
Generally, the VCR cannot record a TV channel that it
cannot receive properly on its own tuner, even if you can
view that TV channel on the TV. However, some VCRs
can record a TV channel by using the TV’s output if that
channel can be viewed on the TV. For details, see your
VCR instruction manual.
79#DXWR#SRZHU#RQ29&5#
79#DXWR#SRZHU#RQ29&5#79#DXWR#SRZHU#RQ29&5#
79#DXWR#SRZHU#RQ29&5#
LPDJH#YLHZ
LPDJH#YLHZLPDJH#YLHZ
LPDJH#YLHZ
When the VCR starts playing, the TV automatically turns on
and the images from the EXT-2 terminal appear on the
screen.
When the VCR menu is operated, the TV automatically turns
on and the images from the EXT-2 terminal appear on the
screen.
This function does not happen if your TV’s main power is
turned off. Set your TV’s main power to on (standby mode).
Note:
A “T-V LINK compatible VCR” means a JVC video
cassette recorder with the T-V LINK logo, or with one of
the following logos. However, these VCRs may support
some or all of the features described earlier. For details,
see your VCR instruction manual.
“Q-LINK” (a trademark of Panasonic Corporation)
“Data Logic” (a trademark of Metz Corporation)
“Easy Link” (a trademark of Phillips Corporation)
“Megalogic” (a trademark of Grundig Corporation)
“SMARTLINK” (a trademark of Sony Corporation).
WFT1EK_E1.fm Page 7 Wednesday, January 17, 2001 9:29 AM
;
8VLQJ#\RXU#79²WKH#EDVLFV
8VLQJ#\RXU#79²WKH#EDVLFV8VLQJ#\RXU#79²WKH#EDVLFV
8VLQJ#\RXU#79²WKH#EDVLFV
7XUQ#WKH#PDLQ#SRZHU#RQ
7XUQ#WKH#PDLQ#SRZHU#RQ7XUQ#WKH#PDLQ#SRZHU#RQ
7XUQ#WKH#PDLQ#SRZHU#RQ
Press the main power button on the TV
The power lamp lights red and your TV is in the standby mode.
If the Power lamp lights green, the TV is already on.
To turn the main power off:
Press the main power button again.
The power lamp goes off.
To save energy, turn the main power off if you are not using
the TV for a long time.
7XUQ#WKH#79#RQ#IURP#VWDQGE\#PRGH
7XUQ#WKH#79#RQ#IURP#VWDQGE\#PRGH7XUQ#WKH#79#RQ#IURP#VWDQGE\#PRGH
7XUQ#WKH#79#RQ#IURP#VWDQGE\#PRGH
Press the
=
==
=
(standby) button, the
4
44
4
button, the
ë
ëë
ë
buttons or the number
buttons
The power lamp goes from red to green and your TV will be
turned on.
To turn the TV off:
Press the
=
==
=
(standby) button again.
The power lamp changes from green to red and the TV goes
into standby mode.
&KRRVH#D#79#FKDQQHO
&KRRVH#D#79#FKDQQHO&KRRVH#D#79#FKDQQHO
&KRRVH#D#79#FKDQQHO
Choose the programme number (PR) that the TV channel has
been set to.
Use the
ë
ëë
ë
buttons:
Press the ë
ëë
ë buttons to choose the programme number
(PR) you want.
Use the number buttons:
Enter the programme number (PR) of the channel using the
number buttons.
Example
PR12
press
~
and
Ÿ
.
•PR6
press
¤
.
Use the PR LIST:
1
Press the
9
99
9
(information) button to
display the PR LIST
main power button
power lamp
1 2 3
4 5 6
7 8 9
0
P
AV
TV OK
MENU
P
FREEZE
SUB-P
F.T/L
TV
number
buttons
WFT1EK_E1.fm Page 8 Wednesday, January 17, 2001 9:29 AM
<
Using your TV–the basics
2
Press the
ì
ìì
ì
and
ë
ëë
ë
buttons to choose a
programme number (PR). Then press the
3
33
3
button.
For Programme numbers (PR) where you have the CHILD
LOCK function set, the
@
@@
@
(CHILD LOCK) mark appears
next to the programme number (PR) in the PR LIST.
You cannot use the
ë
ëë
ë
buttons to choose a Programme
number (PR) which has the CHILD LOCK set.
Even if you try to choose a programme number (PR) with
the CHILD LOCK set, the
@
@@
@
(CHILD LOCK) mark will
appear, and you cannot watch the TV channel. To watch
the TV channel, see “CHILD LOCK” on page 22.
&KDQJLQJ#WKH#YROXPH
&KDQJLQJ#WKH#YROXPH&KDQJLQJ#WKH#YROXPH
&KDQJLQJ#WKH#YROXPH
Press the
ì
ìì
ì
buttons to change the
volume.
The volume indicator appears, and the volume changes, as
you press the
C
CC
C
buttons.
:DWFKLQJ#LPDJHV#IURP#
:DWFKLQJ#LPDJHV#IURP#:DWFKLQJ#LPDJHV#IURP#
:DWFKLQJ#LPDJHV#IURP#
H[WHUQDO#HTXLSPHQW
H[WHUQDO#HTXLSPHQWH[WHUQDO#HTXLSPHQW
H[WHUQDO#HTXLSPHQW
Choose the EXT terminal that the external equipment has
been connected to.
Use the
A
AA
A
button:
Press the
A
AA
A
button to choose an EXT terminal.
Pressing the
A
AA
A
button changes the choice as follows:
Use the
ë
ëë
ë
buttons:
Press the
ë
ëë
ë
buttons to choose an EXT terminal
Use the PR LIST:
1
Press the
9
99
9
(information) button to
display the PR LIST
2
Press the
ì
ìì
ì
and
ë
ëë
ë
buttons to choose
an EXT terminal. Then press the
3
33
3
button
The EXT terminals are listed after programme number PR
99.
You can choose two types of video input signal:
S-VIDEO (Y/C signal) and regular video (composite
signal). For details, see “K(S-VIDEO input)” on page 20.
If you do not have a clear picture or no colour appears,
change the colour system manually. See “COLOUR
SYSTEM” on page 18.
If you choose an EXT terminal with no input signal, the
EXT terminal number becomes fixed on the screen.
This TV set can automatically change over the input
according to a special signal from an external device.
(The EXT-4 terminal does not support it.)
To use the programme number PR 0 (AV):
When the TV and VCR are connected only by the aerial cable,
choosing the programme number PR 0 (AV) allows you to
view images from the VCR. Set the VCR RF channel to
programme number PR 0 (AV) manually. For details, see
“EDIT/MANUAL” on page 25.
Pressing the
A
AA
A
button changes the choice as follows:
The VCR sends its playback image along the aerial cable
as an RF (radio frequency) signal.
Also see your VCR instruction manual.
To return to a TV channel:
Press the
4
44
4
button, the
ë
ëë
ë
buttons or the number
buttons.
EXT-1
EXT-4
EXT-2
EXT-3
TV mode EXT modes
Programme
numbers
PR 1 to PR 99
PR 0
EXT-1
EXT-4
EXT-2
EXT-3
TV mode
EXT modes
Programme
numbers
PR 1 to PR 99
WFT1EK_E1.fm Page 9 Wednesday, January 17, 2001 9:29 AM
43
Using your TV–the basics
8VLQJ#WKH#EXWWRQV#RQ#WKH#79
8VLQJ#WKH#EXWWRQV#RQ#WKH#798VLQJ#WKH#EXWWRQV#RQ#WKH#79
8VLQJ#WKH#EXWWRQV#RQ#WKH#79
1
Press the P B
BB
B buttons to turn the
TV on from standby mode
2
Press the P
B
BB
B
buttons to choose a
programme number (PR) or an EXT
terminal
3
Press the
D
DD
D
(volume) button and the
C
CC
C
buttons to change the volume
1
Press the
D
DD
D
(volume) button
The volume level indicator appears
2
Press the
C
CC
C
buttons while the volume
level indicator is on screen
(Behind the front cover)
WFT1EK_E1.fm Page 10 Wednesday, January 17, 2001 9:29 AM
44
5HPRWH#FRQWURO#EXWWRQV#DQG#IXQFWLRQV
5HPRWH#FRQWURO#EXWWRQV#DQG#IXQFWLRQV5HPRWH#FRQWURO#EXWWRQV#DQG#IXQFWLRQV
5HPRWH#FRQWURO#EXWWRQV#DQG#IXQFWLRQV
1
0XWLQJ#EXWWRQ
0XWLQJ#EXWWRQ0XWLQJ#EXWWRQ
0XWLQJ#EXWWRQ
You can turn the sound off instantly.
Press the
>
>>
>
(muting) button to turn off the
sound. Pressing the
>
>>
>
(muting) button again
restores the previous volume level
2
1XPEHU#EXWWRQV
1XPEHU#EXWWRQV1XPEHU#EXWWRQV
1XPEHU#EXWWRQV
You can choose a programme number (PR) by
entering the programme number
Example:
• PR12
press
~
and
Ÿ
.
•PR6
press
¤
.
You can also press the
A
AA
A
button repeatedly to choose an
EXT terminal.
3
=220#EXWWRQ
=220#EXWWRQ=220#EXWWRQ
=220#EXWWRQ
You can change the screen size by changing to the picture
aspect ratio. The normal aspect ratio is 4:3 (width:height).
Choose the ideal one from the following ZOOM modes.
AUTO(WSS):
When a WSS (Wide Screen Signalling) signal, which shows
the aspect ratio of the picture, is included in the broadcast
signal or the signal from an external device, the TV
automatically changes the ZOOM mode to 16:9 ZOOM mode
or FULL mode according to the WSS signal.
If a WSS signal is not included, the picture is displayed in
accordance with the ZOOM mode set with the 4:3 AUTO
ASPECT function.
For details of the 4:3 AUTO ASPECT function, see “4:3
AUTO ASPECT” on page 18.
When the AUTO(WSS) mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, press the 5
55
5 button and
change to another ZOOM mode.
REGULAR:
Use to view a normal picture (4:3 aspect ratio) as this is its
original shape.
1 2 3
4 5 6
7 8 9
0
P
AV
TV OK
MENU
P
TV
How to open the cover
WFT1EK_E1.fm Page 11 Wednesday, January 17, 2001 9:29 AM
45
Remote control buttons and functions
PANORAMIC:
This stretches the left and right sides of a normal picture (4:3
aspect ratio) to fill the screen, without making the picture
appear unnatural.
The top and bottom of the picture are slightly cut off.
14:9 ZOOM:
This zooms up the wide picture (14:9 aspect ratio) to the
upper and lower limits of the screen.
16:9 ZOOM:
This zooms up the wide picture (16:9 aspect ratio) to the full
screen.
16:9 ZOOM SUBTITLE:
This zooms up the wide picture (16:9 aspect ratio) with
subtitles to the full screen.
FULL:
This uniformly stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the wide TV screen.
For 16:9 aspect ratio pictures that have been squeezed
into a normal picture (4:3 aspect ratio), use the FULL
mode to restore the picture to its original shape.
&KRRVH#WKH#=220#PRGH
&KRRVH#WKH#=220#PRGH&KRRVH#WKH#=220#PRGH
&KRRVH#WKH#=220#PRGH
1
Press the
5
55
5
button to display the ZOOM
menu
2
Press the
ë
ëë
ë
buttons to choose a ZOOM
mode. Then press the
3
33
3
button
The picture expands and the chosen ZOOM mode is
displayed in about 5 seconds.
The ZOOM mode may be automatically changed
due to the control signal from an external device.
When you want to return to the previous ZOOM
mode, choose the ZOOM mode again.
$GMXVWLQJ#WKH#YLVLEOH#DUHD#RI#WKH#
$GMXVWLQJ#WKH#YLVLEOH#DUHD#RI#WKH#$GMXVWLQJ#WKH#YLVLEOH#DUHD#RI#WKH#
$GMXVWLQJ#WKH#YLVLEOH#DUHD#RI#WKH#
SLFWXUH
SLFWXUHSLFWXUH
SLFWXUH
If subtitles or the top (or bottom) of the picture are cut off, you
can adjust the visible area of the picture manually.
1
Press the
5
55
5
button
The ZOOM menu appears.
2
Press the
3
33
3
button to display the ZOOM
mode indicatior.
The indicator appears.
3
While it is displayed, press the
ë
ëë
ë
buttons
to change the height of the picture.
You cannot adjust the visible area in REGULAR or
FULL mode.
4
+<3(5#6281'#EXWWRQ
+<3(5#6281'#EXWWRQ+<3(5#6281'#EXWWRQ
+<3(5#6281'#EXWWRQ
You can enjoy sounds with a wider ambience.
Press the
ò
òò
ò
(HYPER SOUND) button to turn
the HYPER SOUND function on or off
The HYPER SOUND function does not work properly with
mono sound.
The HYPER SOUND function can be also turned on or off
by using the SOUND SETTING menu. For details, see
“HYPER SOUND” on page 19.
WFT1EK_E1.fm Page 12 Wednesday, January 17, 2001 9:29 AM
46
Remote control buttons and functions
5
#,QIRUPDWLRQ#EXWWRQ
#,QIRUPDWLRQ#EXWWRQ#,QIRUPDWLRQ#EXWWRQ
#,QIRUPDWLRQ#EXWWRQ
You can display the PR LIST or the current time on the
screen.
Press the
9
99
9
(information) button
Pressing the
9
99
9
(information) button changes the
display as follows:
You can choose programme numbers (PR) or EXT
terminals with the PR LIST. For details, see “Use the PR
LIST:” on page 8.
This TV uses teletext data to set the time. If the TV has not
received a TV channel that has teletext programmes
since it was turned on, the time display is blank. To see
the time, choose a TV channel that has teletext
programmes. The time will still be displayed as long as
you do not turn off the TV, even if you choose other TV
channels.
When watching videos, the incorrect time is sometimes
displayed.
The
9
99
9
(information) button will also operate menus.
For details, see “Using the TV’s menus” on page 16.
6
79#EXWWRQ
79#EXWWRQ79#EXWWRQ
79#EXWWRQ
You can return to a TV channel instantly.
Press the
4
44
4
button.
The TV returns to the TV mode and a TV channel appears.
The
4
44
4
button will also operate menus. For details, see
“Using the TV’s menus” on page 16.
7
ì
ìì
ì
#%XWWRQV
#%XWWRQV#%XWWRQV
#%XWWRQV
You can adjust the volume.
Press the
ì
ìì
ì
buttons to adjust the sound.
The
ì
ìì
ì
buttons will also operate menus. For details, see
“Using the TV’s menus” on page 16.
8
6WDQGE\#EXWWRQ
6WDQGE\#EXWWRQ6WDQGE\#EXWWRQ
6WDQGE\#EXWWRQ
Press the
=
==
=
(standby) button to turn the TV
on or off.
When the TV is turned on, the power lamp changes from red
to green.
9
&RORXU#EXWWRQV
&RORXU#EXWWRQV&RORXU#EXWWRQV
&RORXU#EXWWRQV
The colour buttons are used for the teletext operations or the
menu operations. For details, see “~ Teletext control buttons
and VCR/(/DVD switch” on page 14 or “Using the TV’s
menus” on page 16.
0
2.#EXWWRQ
2.#EXWWRQ2.#EXWWRQ
2.#EXWWRQ
The
3
33
3
button is used to operate menus. For details, see
“Using the TV’s menus” on page 16.
-
ë
ëë
ë
#%XWWRQV
#%XWWRQV#%XWWRQV
#%XWWRQV
You can choose a programme number (PR) or an EXT
terminal.
Press the
ë
ëë
ë
buttons to choose a
Programme number (PR) or an EXT terminal.
The
ë
ëë
ë
buttons will also operate menus.
For details, see “Using the TV’s menus” on page 16.
=
9&52'9'# FRQWURO# EXWWRQV# DQG
9&52'9'# FRQWURO# EXWWRQV# DQG9&52'9'# FRQWURO# EXWWRQV# DQG
9&52'9'# FRQWURO# EXWWRQV# DQG
9&52
9&529&52
9&52(
((
( 2'9'#VZLWFK
2'9'#VZLWFK2'9'#VZLWFK
2'9'#VZLWFK
These buttons will operate a JVC brand VCR or DVD player.
Pressing a button that looks the same as the device’s original
remote control button has the same effect as the original
remote control.
1
Set the VCR/
(
((
(
/DVD switch to the VCR or
DVD position.
VCR:
When you are using a VCR, set the switch to the VCR
position.
DVD:
When you are using a DVD player, set the switch to the
DVD position.
(
((
(
(Text):
When you are viewing Teletext programmes, set the
switch to the
(
((
(
(Text) position.
2
Press the VCR/DVD control button to
control your VCR or DVD player
If your device is not made by JVC, these buttons will
not work.
Even if your device is made by JVC, some of these
buttons may not work, depending on the device you
are using.
You can use the
B
BB
B
buttons to choose a TV channel
the VCR will receive, or choose the chapter the DVD
player plays back.
Some models of DVD player use the
B
BB
B
buttons for
both operating the fast forward/backward functions
and for choosing the chapter. In this case, the 1/
¡ buttons do not work.
Current time
No display
WFT1EK_E1.fm Page 13 Wednesday, January 17, 2001 9:29 AM
47
Remote control buttons and functions
~
#
##
#7HOHWH[W#FRQWURO#EXWWRQV#DQG#9&52
7HOHWH[W#FRQWURO#EXWWRQV#DQG#9&527HOHWH[W#FRQWURO#EXWWRQV#DQG#9&52
7HOHWH[W#FRQWURO#EXWWRQV#DQG#9&52
(
((
(
2'9'
2'9'2'9'
2'9'#VZLWFK
#VZLWFK#VZLWFK
#VZLWFK
%DVLF#RSHUDWLRQ
%DVLF#RSHUDWLRQ%DVLF#RSHUDWLRQ
%DVLF#RSHUDWLRQ
You can view two types of teletext broadcasts on the TV:
FLOF (Fastext) and WST (World Standard Text).
1
Choose a TV channel with a teletext
broadcast
2
Set the VCR/
(
((
(
/DVD switch to the
(
((
(
(Text)
position
3
Press the
:
::
:
(Text) button to display
the teletext
Pressing the :
::
: (Text) button changes the mode as
follows:
4
Choose a teletext page by pressing the
ë
ëë
ë
buttons, number buttons or colour
buttons
To return to the TV mode:
Press the
4
44
4
button or
:
::
:
(Text) button.
If you have trouble receiving teletext broadcasts,
contact your local dealer or the teletext station.
In Text mode, the ZOOM mode is fixed to FULL.
You cannot operate menus when viewing a teletext
programme.
8VLQJ#WKH#/LVW#0RGH
8VLQJ#WKH#/LVW#0RGH8VLQJ#WKH#/LVW#0RGH
8VLQJ#WKH#/LVW#0RGH
You can store the numbers of your favourite teletext pages in
memory and call them up quickly using the colour buttons.
To store the page numbers:
1
Press the
ù
ùù
ù
button to go into the List
mode
The page numbers you have stored are displayed at the
bottom of the screen.
2
Press a colour button to choose a
position. Then press the number buttons
to enter the page number
3
Press and hold down the
ö
öö
ö
button
The four page numbers blink white to show that they are
stored in memory.
To call up a stored page:
1
Press the
ù
ùù
ù
button to enter the List mode
2
Press a colour button having a stored page
To leave the List mode:
Press the ù
ùù
ù button again.
P
TV OK
MENU
P
TV mode
Text mode
1 2 3
4 5 6
7 8 9
0
AV
WFT1EK_E1.fm Page 14 Wednesday, January 17, 2001 9:29 AM
48
Remote control buttons and functions
+ROG
+ROG+ROG
+ROG
You can hold a teletext page on the screen for as long as you
want, even while several other teletext pages are being
received.
Press the
û
ûû
û
button
To cancel the Hold function:
Press the û
ûû
û button again.
6XE0SDJH
6XE0SDJH6XE0SDJH
6XE0SDJH
Some teletext pages include sub-pages that are automatically
displayed.
You can hold any sub-page, or view it at any time.
1
Press the
õ
õõ
õ
button to operate the
sub-page function
2
Press the Number buttons to enter a
sub-page number
Example:
• 3rd sub-page
press
)
,
)
,
)
and
3
.
To cancel the sub-page function:
Press the
õ
õõ
õ
button again.
You can also choose a sub-page by pressing the
red or green button.
5HYHDO
5HYHDO5HYHDO
5HYHDO
Some teletext pages include hidden text (such as the
answers to a quiz).
You can display the hidden text.
Each time you press the
ø
øø
ø
button, text is
hidden or revealed
6L]H
6L]H6L]H
6L]H
You can double the height of the teletext display.
Press the
÷
÷÷
÷
button.
,QGH[
,QGH[,QGH[
,QGH[
You can return to the index page instantly.
Press the
ú
úú
ú
button
FLOF (Fastext)/WST (World Standard Text):
Returns to page 100 or a previously specified page.
List mode:
Returns to the page number displayed in the lower left area of
the screen.
&DQFHO
&DQFHO&DQFHO
&DQFHO
You can search for a teletext page while watching TV.
1
Press the number button to enter a page
number, or press a colour button
The TV searches for a teletext page.
2
Press the
ü
üü
ü
button.
The TV programme appears. When the TV finds the
teletext page, its page number appears in the upper left
of the screen.
3
Press the
ü
üü
ü
button to return to a teletext
page when the page number is on the
screen
Note:
The TV mode cannot be resumed by pressing the
ü
üü
ü
button. To return to the TV mode press the
4
44
4
button.
Hold indication
WFT1EK_E1.fm Page 15 Wednesday, January 17, 2001 9:29 AM
49
8VLQJ#WKH#79·V#PHQXV#
8VLQJ#WKH#79·V#PHQXV#8VLQJ#WKH#79·V#PHQXV#
8VLQJ#WKH#79·V#PHQXV#
This TV has a number of functions you can operate using
menus. To use all your TV’s functions fully, you need to
understand how to use the basic menus.
1
Press the
3
button to display the
MENU (main menu)
The MENU (main menu) appears. In it, the titles of the
menus are displayed.
2
Press the
ë
buttons to choose a
menu title, and press the
3
button
The menu appears.
3 Follow the menus according to the
function you want to use
For more details, see the descriptions of each menu
and its functions, on the following pages.
The display appearing at the bottom of a menu
shows you a button on the remote control that you
can use when you operate a chosen function.
4 Press the
3
button to complete the
setting
The menu disappears.
To return to the previous menu:
Press the
9
(information) button.
To exit a menu instantly:
Press the
4
button.
WFT1EK_E2.fm Page 16 Wednesday, January 17, 2001 9:30 AM
4:
3LFWXUH#VHWWLQJ
3LFWXUH#VHWWLQJ3LFWXUH#VHWWLQJ
3LFWXUH#VHWWLQJ
To display the PICTURE SETTING menu:
1
Press the
3
button to display the MENU
(main menu)
2
Press the
ë
buttons to choose PICTURE
SETTING, and press the
3
button
7,17
7,177,17
7,17
You can select one of three TINT modes (three kinds of
picture settings) to adjust the picture settings automatically.
1
Press the
ë
buttons to choose TINT
2
Press the
ì
buttons to choose a mode
COOL:
A cool white colour base with a boost in the colour and
contrast levels that creates a more vivid picture.
WARM:
A warm orange/red colour base that creates the
appropriate colour and contrast levels for watching films.
NORMAL:
A normal white colour base with normal colour and
contrast levels.
3
Press the
3
button to complete the
setting
The menu disappears.
3LFWXUH#DGMXVWPHQW
3LFWXUH#DGMXVWPHQW3LFWXUH#DGMXVWPHQW
3LFWXUH#DGMXVWPHQW
You can change the picture settings of each TINT mode as
you like.
The picture settings changed are stored in the TINT mode.
1
Press the
ë
buttons to choose an item.
2
Press the
ì
buttons to change the
setting.
You can change the HUE setting (picture hue) only
when the colour system is NTSC 3.58 or NTSC 4.43.
(See “Specifications” on page 34.)
To return to the default settings in each TINT
mode:
Press the blue button.
This returns the picture settings in the TINT mode you
have chosen to the default settings, and stores them in
the TINT mode.
3
Press the
3
button to complete the
settings
The menu disappears.
(&2#02'(
(&2#02'((&2#02'(
(&2#02'(
When you set the ECO MODE function to ON, the screen
contrast is automatically adjusted to a setting suitable for the
brightness of your room. This reduces eye strain for you and
the amount of power the TV uses.
1
Press the
ë
buttons to choose ECO
MODE
2
Press the
ì
buttons to choose ON
To cancel the ECO MODE function:
Press the
ì
buttons to choose OFF.
3
Press the
3
button to complete the
setting
The menu disappears.
ï
Item
î
Lower
CONTRAST
(picture contrast)
Higher
Darker
BRIGHT
(picture brightness)
Brighter
Softer
SHARP
(picture sharpness)
Sharper
Lighter
COLOUR
(picture colour)
Deeper
Reddish
HUE
(picture hue)
Greenish
WFT1EK_E2.fm Page 17 Wednesday, January 17, 2001 9:30 AM
4;
3LFWXUH#IHDWXUHV
3LFWXUH#IHDWXUHV3LFWXUH#IHDWXUHV
3LFWXUH#IHDWXUHV
To display the PICTURE FEATURES menu:
1
Press the
3
button to display MENU (main
menu)
2
Press the
ë
buttons to choose PICTURE
FEATURES, and press the
3
button
$872#915
$872#915$872#915
$872#915
VNR Stands for “video noise reduction”.
The AUTO VNR function reduces any “noise” (interference or
snowing) in the current picture. The function also adjusts the
optimum sharpness of the picture (SHARP).
1
Press the
ë
buttons to choose AUTO
VNR
2
Press the
ì
buttons to choose AUTO
MIN:
The AUTO VNR function is cancelled. If you set the
mode to AUTO but feel that the sharpness of the original
picture has not been reproduced fully, change the mode
to MIN. However, any noise remaining in the original
picture may be emphasized.
MAX:
This mode always reduces any noise as much as
possible, irrespective of state of the picture. When you
set the mode to AUTO but still notice some noise,
change the mode to MAX. However, this may reduce the
sharpness of the picture.
3
Press the
3
button to complete the
setting.
The menu disappears.
&2/285#6<67(0
&2/285#6<67(0&2/285#6<67(0
&2/285#6<67(0
The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
system manually.
1
Press the
ë
buttons to choose COLOUR
SYSTEM. Then press the
3
button
The sub-menu of the COLOUR SYSTEM function
appears.
2
Press the
ì
buttons to choose the
appropriate colour system.
PAL:
PAL system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input
signal. You can only use this when you are viewing a
picture from programme number PR 0 (AV), or on EXT
terminal.
3
Press the
3
button to complete the
setting
The menu disappears.
The AUTO function may not work properly if you
have poor signal quality. If the picture is abnormal in
the AUTO function, choose another colour system
manually.
You cannot choose NTSC 3.58 or NTSC 4.43 for
programme numbers PR 0 (AV) to PR 99.
7=6#$872#$63(&7
7=6#$872#$63(&77=6#$872#$63(&7
7=6#$872#$63(&7
This function only works when the ZOOM mode is set to
AUTO(WSS) mode. It sets the ZOOM mode you want to use
for when a WSS signal is not included in the broadcast signal
or the signal from an external device. You can choose one of
three ZOOM modes.
For details of the AUTO(WSS) mode, see the “AUTO
(WSS)” section within “3 ZOOM button” on page 11.
1
Press the
ë
buttons to choose 4:3 AUTO
ASPECT. Then press the
3
button
The sub-menu of the 4:3 AUTO ASPECT function
appears.
2
Press the
ë
buttons to choose a ZOOM
mode
3
Press the
3
button to complete the
setting
The menu disappears.
WFT1EK_E2.fm Page 18 Wednesday, January 17, 2001 9:30 AM
4<
6RXQG#VHWWLQJ
6RXQG#VHWWLQJ6RXQG#VHWWLQJ
6RXQG#VHWWLQJ
To display the SOUND SETTING menu:
1
Press the
3
button to display the MENU
(main menu)
2
Press the
ë
buttons to choose SOUND
SETTING. Then press the
3
button
67(5(2#2#,‡,,
67(5(2#2#,‡,,67(5(2#2#,‡,,
67(5(2#2#,‡,,
When you are viewing a bilingual broadcast programme, you
can choose the sound from Bilingual I (Sub I) or Bilingual II
(Sub II). If you have poor reception on a stereo broadcast, you
can change from stereo to mono sound so that you can hear
the broadcast more clearly and easily.
1
Press the
ë
buttons to choose
STEREO / I • II
2
Press the
ì
buttons to choose a sound
mode
E
:Stereo sound
ý
H
:mono sound
ý
ý
F
:Bilingual I (sub I)
ý
G
:Bilingual II (sub II)
3
Press the
3
button to complete the
setting
The menu disappears.
The sound mode you can choose differs depending
on the TV programme.
This function does not work in the EXT modes. And
this function does not appear in the SOUND
SETTING menu.
6RXQG#DGMXVWPHQW
6RXQG#DGMXVWPHQW6RXQG#DGMXVWPHQW
6RXQG#DGMXVWPHQW
You can adjust the sound to your liking.
1
Press the
ë
buttons to choose an item
2
Press the
ì
buttons to adjust it
3
Press the
3
button to complete the
setting
The menu disappears.
+<3(5#6281'
+<3(5#6281'+<3(5#6281'
+<3(5#6281'
You can enjoy sounds with a wider ambience.
1
Press the
ë
buttons to choose HYPER
SOUND
2
Press the
ì
buttons to choose ON
To cancel the HYPER SOUND function:
Press the
ì
buttons to choose OFF.
3
Press the
3
button to complete the
setting
The menu disappears
The HYPER SOUND function does not work properly
with mono sound.
You can turn the HYPER SOUND function on or off
with a single press. For details, see “4 HYPER
SOUND button” on page 12.
ï
Item
î
Weaker
BASS
Stronger
Weaker
TREBLE
Stronger
Left
BALANCE
Right
WFT1EK_E2.fm Page 19 Wednesday, January 17, 2001 9:30 AM
53
(;7#6(77,1*
(;7#6(77,1*(;7#6(77,1*
(;7#6(77,1*
To display the EXT SETTING menu:
1
Press the
3
button to display the MENU
(main menu)
2
Press the
ë
buttons to choose EXT
SETTING. Then press the
3
button
K
KK
K
+609,'(2#LQSXW,
+609,'(2#LQSXW,+609,'(2#LQSXW,
+609,'(2#LQSXW,
You can connect a device (such as an S-VHS VCR) to enjoy
the high-quality picture of the S-VIDEO signal (Y/C signal).
Preparation:
First read the device’s instruction manual and
“Further preparation” on page 30 to connect the device to
the TV properly. Second, follow the device’s instruction
manual to set the device so that it sends an S-VIDEO signal
(Y/C signal) to the TV.
Do not set K
KK
K(S-VIDEO input) to an EXT terminal
connected to a device which cannot output an S-VIDEO (Y/
C signal). If it is set wrongly, a picture cannot appear.
1
Press the
ë
buttons or
ì
buttons to
choose an EXT terminal
2
Press the yellow button and set the
K
KK
K
(S-VIDEO input)
An K
KK
K (S-VIDEO input) mark is displayed. You can
view an S-VIDEO signal (Y/C signal) instead of the
regular video signal (composite signal).
To cancel the
K
KK
K
(S-VIDEO input) setting:
Press the yellow button and turn off the K
KK
K (S-VIDEO
input) mark.
The regular video signal (composite signal) pictures are
resumed.
3
Press the
3
button to complete the
setting.
The menu disappears.
The EXT-1 terminal does not support S-VIDEO signal
(Y/C signal) and you cannot set K
KK
K (S-VIDEO input)
in the EXT-1 terminal.
Setting K
KK
K (S-VIDEO input) changes the head
character from “E” to “S”. When an EXT terminal
receives a normal video signal, “E1”, “E2”, “E3” or
“E4” appears on the display. This changes to “S2”,
“S3” or “S4” when it receives an S-VIDEO signal.
Even a device which can output an S-VIDEO signal
(Y/C signal) may output a regular video signal
(composite signal) depending on the device setting. If
a picture cannot appear because the
K
KK
K (S-VIDEO
input)
setting has been made, read the device
instruction manual carefully again to check for the
device settings.
/,67
/,67/,67
/,67
You can store a name for each of the devices connected to
each EXT terminal. Giving a name to an EXT terminal makes
the EXT terminal number appear on the screen, together with
its name.
1
Press the
ë
buttons or
ì
buttons to
choose an EXT terminal
2
Press the blue button to display the name
list (LIST)
P
P
EXT-1
EXT-3
EXT-2
EXT-4
TV
P
P
EXT-1
EXT-3
EXT-2
EXT-4
TV
WFT1EK_E2.fm Page 20 Wednesday, January 17, 2001 9:30 AM
54
EXT SETTING
3
Press the
ë
buttons to choose a name.
Then press the
3
button.
The LIST disappears and the name is assigned to the
EXT terminal.
To erase a name assigned to the EXT terminal:
Choose a blank space.
4
Press the
3
button to complete the
setting.
The menu disappears.
You cannot choose an EXT terminal name that is not
on the name list (LIST).
'8%%,1*
'8%%,1*'8%%,1*
'8%%,1*
You can choose a signal source to be output from the EXT-2
terminal.
You can do this with the output signal of the device connected
to another EXT terminal, or the picture and sound from a TV
channel you are currently viewing.
1
Press the
ì
buttons to choose the EXT-2
terminal.
2
Press the
ë
buttons to choose another
EXT terminal or TV.
The arrow in the menu represents a signal flow. The left
side of the arrow shows a signal source output from the
EXT-2 terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected to an EXT
terminal passes through the TV and is output from the
EXT-2 terminal.
TV:
The picture and sound of the TV channel you are
currently viewing are output from the EXT-2 terminal.
3
Press the
3
button to complete the
setting.
The menu disappears.
During dubbing, you cannot turn off the TV. Turning
off the TV also turns off the output from the EXT-2
terminal.
When you choose an EXT terminal as an output, you
can view a TV programme or a picture from the other
EXT terminal while dubbing the picture from a
device connected to the EXT terminal onto a VCR
connected to the EXT-2 terminal.
The RGB signals from TV games cannot be
output.Teletext programmes cannot be output.
WFT1EK_E2.fm Page 21 Wednesday, January 17, 2001 9:30 AM
55
)($785(6
)($785(6)($785(6
)($785(6
To display the FEATURES menu:
1
Press the
3
button to display the MENU
(main menu)
2
Press the
ë
buttons to choose
FEATURES. Then press the
3
button
6/((3#7,0(5
6/((3#7,0(56/((3#7,0(5
6/((3#7,0(5
You can set the TV to automatically turn off after a set time.
1
Press the
ë
buttons to choose SLEEP
TIMER. Then press the
3
button
A sub-menu of the SLEEP TIMER function appears.
2
Press the
ì
buttons to set the period of
time
You can set the time for up to 120 minutes (2 hours) in
10 minute steps.
To cancel the SLEEP TIMER function:
Press the
ï
button to set the period of time to “OFF.”
3
Press the
3
button to complete the
setting
The menu disappears.
One minute before the SLEEP TIMER function turns
off the TV, “GOOD NIGHT!” appears.
The SLEEP TIMER function cannot be used to turn
off the TV’s main power.
When the SLEEP TIMER function is on, you can
display the sub-menu of the SLEEP TIMER function
again to confirm or change the remaining period of
time of the SLEEP TIMER function. Press the
3
button to leave the menu after confirming or
changing the remaining time.
%/8(#%$&.
%/8(#%$&.%/8(#%$&.
%/8(#%$&.
You can set the TV to automatically change to a blue screen
and mute the sound if the signal is weak or absent, or when
there is no input from an external device.
1
Press the
ë
buttons to choose BLUE
BACK
2
Press the
ì
buttons to choose ON
To cancel the BLUE BACK function:
Press the
ì
buttons to choose OFF.
3
Press the
3
button to complete the
setting
The menu disappears.
&+,/'#/2&.
&+,/'#/2&.&+,/'#/2&.
&+,/'#/2&.
When there is a TV channel you do not want your children to
watch, you can use the CHILD LOCK function to lock out the
TV channel. Even when a child chooses a programme
number (PR) for a locked TV channel the screen will change
to blue and display
@
@@
@
(CHILD LOCK) so the TV channel
cannot be viewed. Unless you enter a pre-set ID number by a
special operation, the lock cannot be released and the child
cannot view the TV channel.
7R#VHW#WKH#&+,/'#/2&.#IXQFWLRQ
7R#VHW#WKH#&+,/'#/2&.#IXQFWLRQ7R#VHW#WKH#&+,/'#/2&.#IXQFWLRQ
7R#VHW#WKH#&+,/'#/2&.#IXQFWLRQ
1
Press the
ë
buttons to choose CHILD
LOCK. Then press the
A
button.
“SET ID NO.” (ID number setting screen) appears.
2
To set the ID number you want
1
Press the
ë
buttons to choose a number
2
Press the
ì
buttons to move the cursor
3
Press the
3
button.
The sub-menu of CHILD LOCK appears.
4
Press the
ë
buttons to choose a TV
channel
Every time you press the
ë
buttons, the programme
number (PR) changes, and the picture of the TV channel
registered in the programme number (PR) is displayed
on the screen.
WFT1EK_E2.fm Page 22 Wednesday, January 17, 2001 9:30 AM
56
FEATURES
5
Press the blue button and set the CHILD
LOCK function.
@
(CHILD LOCK) appears and the TV channel is locked.
To reset the CHILD LOCK function:
Press the blue button again.
@
(CHILD LOCK) disappears.
6
Press the
3
button to complete the
setting.
The menu disappears.
To disable easy resetting of the CHILD LOCK
function, the menu disappears if you choose the
CHILD LOCK function and press the
3
button.
7R#YLHZ#D#ORFNHG#79#FKDQQHO
7R#YLHZ#D#ORFNHG#79#FKDQQHO7R#YLHZ#D#ORFNHG#79#FKDQQHO
7R#YLHZ#D#ORFNHG#79#FKDQQHO
1
Choose a programme number (PR) for a
locked TV channel, by using the number
buttons or PR LIST
The screen changes to blue and the
@
(CHILD LOCK)
appears. You cannot view the TV channel.
2
Press the
9
(information) button to
display “ID NO.” (ID No. input screen)
3
Press the number buttons to enter the ID
number
The lock is temporarily released so you can view the TV
channel.
If you have forgotten the ID number:
Perform step 1 of “To set the CHILD LOCK function”.
After confirming the ID number, press the
4
button to
exit the menu.
Even if you reset the lock temporarily, it does not
mean that the CHILD LOCK function set for the TV
channel is cancelled. The next time anyone tries to
view the TV channel, it will be locked again.
When you want to cancel the CHILD LOCK function,
you must perform the operation “To set the CHILD
LOCK function” again.
To stop it being easy to choose the programme
number (PR) of a locked TV channel, the
programme number (PR) has been set so that it
cannot be chosen by the
ë
buttons or the buttons
of the TV.
To stop it being easy to reset of the lock, “ID NO.” (ID
No. input screen) is set so that it cannot appear
unless you press the
9
(Information) button.
'(&2'(5#+(;705,
'(&2'(5#+(;705,'(&2'(5#+(;705,
'(&2'(5#+(;705,
You can only use this function if you have a decoder
connected to a T-V LINK compatible VCR, which in turn is
connected to the EXT-2 terminal. To use this function, see
“Using the DECODER (EXT-2) function” on page 29.
If you have not connected a decoder with a T-V LINK
compatible VCR to the EXT-2 terminal, setting this function
to “ON” by mistake causes the picture/sound of a TV
channel you are currently viewing to disapper.
WFT1EK_E2.fm Page 23 Wednesday, January 17, 2001 9:30 AM
57
,167$//
,167$//,167$//
,167$//
To display the INSTALL menu:
1
Press the
3
33
3
button to display the MENU
(main menu)
2
Press the
ë
ëë
ë
buttons to choose the
INSTALL menu. Then press the
3
33
3
button
/$1*8$*(
/$1*8$*(/$1*8$*(
/$1*8$*(
You can choose the language you want to use for the
on-screen display from the language list in the menu.
1
Press the
ë
ëë
ë
buttons to choose
LANGUAGE. Then press the
3
33
3
button
A sub-menu of the LANGUAGE function appears.
2
Press the
ë
ëë
ë
buttons to choose a
language
3
Press the
3
33
3
button to complete the
setting
The menu disappears.
$872#352*5$0
$872#352*5$0$872#352*5$0
$872#352*5$0
To receive SKY 1 you need a satellite tuner. You must have
the satellite tuner set to SKY 1 before starting the AUTO
PROGRAM function.
You can automatically store the TV channels for which you
have the best reception. Store them in the TV’s programme
numbers (PR) list by doing the following.
1
Press the
ë
ëë
ë
buttons to choose AUTO
PROGRAM
2
Press the
3
33
3
button to start the AUTO
PROGRAM function
The AUTO PROGRAM menu appears and the TV
channels you receive are automatically registered in the
programme numbers (PR) list.
To cancel the AUTO PROGRAM function:
Press the
4
button.
3
After the TV channels have been stored in
the programme numbers (PR) list, the EDIT
menu appears
You can now edit the programme numbers (PR) list
using the EDIT/MANUAL function. For details, see
“EDIT/MANUAL” on page 25.
When not using the EDIT/MANUAL function:
If you do not need to use the EDIT/MANUAL function, go
to the next step.
4
Press the
3
33
3
button to display the T-V LINK
menu
5
Operate the T-V LINK menu according to
the type of video cassette recorder (VCR)
you have connected to the EXT-2 terminal
If you do not have a T-V LINK compatible VCR
connected:
Press the
4
button to leave the T-V LINK menu.
The T-V LINK menu disappears, and all the settings are
completed.
If you have a T-V LINK compatible VCR
connected:
See “Downloading data to a VCR” on page 29 to
transmit the programme number (PR) data to the VCR.
If a TV channel you want to view is not set to a
Programme number (PR), set it manually using the
MANUAL function. For details, see “EDIT/MANUAL”
on page 25.
The AUTO PROGRAM function does not set the
programme number PR 0 (AV) for your video
cassette recorder. You will need to set this using the
manual function.
In some areas you may get TV reception from more
than one transmitter, for example. different ITV
regions. In this case each TV channel could be set
twice. If this happens, the first set of channels will
have the stronger signal. If you want to delete the
second set of channels, you will have to do it
manually (see page 27).
WFT1EK_E3.fm Page 24 Wednesday, January 17, 2001 9:30 AM
58
INSTALL
(',720$18$/
(',720$18$/(',720$18$/
(',720$18$/
The EDIT/MANUAL functions are divided into two types:
editing the current programme numbers (PR)
(EDIT functions); and
manually storing a TV channel you want to view a
programme number (PR) (MANUAL function).
Here are the details about these functions:
MOVE:
This function changes the programme number (PR) of a TV
channel.
ID:
This function registers a channel name (ID) to a TV channel.
INSERT:
This function adds a new TV channel in the current
programme numbers (PR) list by using the CH number.
DELETE:
This function deletes a TV channel you do not want to list.
MANUAL:
This function manually stores a new TV channel in a
programme number (PR).
For programme number PR 0, “AV” appears in the
programme numbers (PR) list.
An EXT terminal number does not appear in the
programme numbers (PR) list.
The CH number is a number unique to the TV and
corresponds to the channel number of a TV channel. For
the relationship between a channel number and a CH
number, see “CH NUMBER” on page 27.
You cannot use the INSERT function if you do not know
the channel number of a TV channel. Use the MANUAL
function to register a TV channel in the programme
number (PR) list.
Caution:
Using the MOVE, DELETE or INSERT functions rewrites the
current programme numbers (PR) list. Therefore, the
programme numbers (PR) of some of the TV channels will
change.
Using the MANUAL function for a TV channel for which the
CHILD LOCK function has been set cancels the CHILD
LOCK function for that channel.
Using the MANUAL function for a TV channel for which the
DECODER (EXT-2) function has been set to ON returns the
setting of the DECODER (EXT-2) function for that channel
to OFF.
When a TV channel has already been registered in PR 99,
using the INSERT function deletes that TV channel.
1
Press the
ë
ëë
ë
buttons to choose EDIT/
MANUAL. Then press the
3
33
3
button
2
Follow the options for the function you
want to use
3
Press the
3
33
3
button to complete the
settings
The T-V LINK menu appears.
4
Follow the T-V LINK menu according to the
type of VCR you have connected to the
EXT-2 terminal
If you do not have a T-V LINK compatible VCR
connected:
Press the
4
button to leave the T-V LINK menu.
The T-V LINK menu disappears and all the settings are
completed.
If you have a T-V LINK compatible VCR
connected:
Follow the operating procedure “Downloading data to a
VCR” on page 29 to transmit the programme number
(PR) data to the VCR.
029(
029(029(
029(
1
Press the
ë
ëë
ë
buttons to choose a TV
channel
Every time you press the
ë
ëë
ë
buttons, the programme
number (PR) changes, and the picture of the TV channel
stored in the programme number (PR) appears on the
screen.
2
Press the
î
îî
î
button to start the MOVE
function
3
Press the
ë
ëë
ë
buttons to choose a new
programme number (PR)
To cancel the MOVE function:
Press the
9
99
9
(information) button.
WFT1EK_E3.fm Page 25 Wednesday, January 17, 2001 9:30 AM
59
INSTALL
4
Press the
ï
ïï
ï
button to change the
programme number (PR) of a TV channel
to a new programme number (PR)
,'
,','
,'
1
Press the
ë
ëë
ë
buttons to choose a TV
channel
Every time you press the
ë
ëë
ë
buttons, the programme
number (PR) changes, and the picture of the TV channel
stored in the programme number (PR) appears on the
screen.
2
Press the red button to start the ID
function
3
Press the
ë
ëë
ë
buttons to choose the first
character of a channel name (ID) you want
to give the TV channel
4
Press the blue button to display the ID LIST
(channel name list)
5
Press the
ë
ëë
ë
buttons to choose the
channel name (ID)
To cancel the ID function:
Press the
9
99
9
(Information) button.
6
Press the
3
33
3
button to give a channel
name (ID) to a TV channel
You can give your own unique channel name (ID) to
the TV channel. When you have finished step 3, do
not go to step 4. Press the
ì
ìì
ì
buttons to move the
cursor, and press the
ë
ëë
ë
buttons to choose each
character of the channel name (ID). Then press the
3
33
3
button to register the channel name (ID) to the TV
channel.
,16(57
,16(57,16(57
,16(57
Preparation:
You need to find the CH number for the TV channel. Find the
CH number from the “CH NUMBER” table on page 27 based
on the channel number of the TV channel.
1
Press the
ë
ëë
ë
buttons to choose a
Programme number (PR) for which you will
register a new TV channel
2
Press the green button and start the
INSERT function
To cancel the INSERT function:
Press the
9
99
9
(Information) button.
3
Press the number buttons to enter the
remaining CH number
The TV shifts to registration mode.
When the registration is completed, the picture of the TV
channel appears on the screen.
The CH number is a number given to each
broadcast frequency that carries a TV channel. If the
TV cannot detect the TV channel corresponding to
the broadcast frequency indicated by the CH
number, a “no-signal” picture appears.
WFT1EK_E3.fm Page 26 Wednesday, January 17, 2001 9:30 AM
5:
INSTALL
'(/(7(
'(/(7('(/(7(
'(/(7(
1
Press the
ë
ëë
ë
buttons to choose a TV
channel
Every time you press the ë buttons, the programme
number (PR) changes over, and the picture of the TV
channel stored in the programme number list (PR)
appears on the screen.
2
Press the yellow button to delete the TV
channel
The TV channel is deleted from the programme numbers
(PR) list.
0$18$/
0$18$/0$18$/
0$18$/
1
Press the
ë
ëë
ë
buttons to choose a
programme number (PR) for a new TV
channel
2
Press the blue button to activate the
MANUAL function
To cancel the MANUAL function:
Press the
9
99
9
(Information) button.
3
Press the green or red button to search for
a TV channel
Scanning stops when the TV finds a TV channel. Then
the TV channel is displayed.
4
Press the green or red button repeatedly
until the TV channel you want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV
channel.
5
Press the
3
33
3
button and register the TV
channel to a programme number (PR)
The normal EDIT menu appears.
&+#180%(5
&+#180%(5&+#180%(5
&+#180%(5
When you want to use the INSERT function on page 26,
find the CH number corresponding to the channel number
of the TV channel from this table.
If you want to know a particular TV channel’s channel
menu, look in TV listings magazines or contact the
broadcaster.
CH Channel
CH 21 E21
CH 22 E22
CH 23 E23
CH 24 E24
CH 25 E25
CH 26 E26
CH 27 E27
CH 28 E28
CH 29 E29
CH 30 E30
CH 31 E31
CH 32 E32
CH 33 E33
CH 34 E34
CH 35 E35
CH 36 E36
CH 37 E37
CH 38 E38
CH 39 E39
CH 40 E40
CH 41 E41
CH 42 E42
CH 43 E43
CH 44 E44
CH 45 E45
CH Channel
CH 46 E46
CH 47 E47
CH 48 E48
CH 49 E49
CH 50 E50
CH 51 E51
CH 52 E52
CH 53 E53
CH 54 E54
CH 55 E55
CH 56 E56
CH 57 E57
CH 58 E58
CH 59 E59
CH 60 E60
CH 61 E61
CH 62 E62
CH 63 E63
CH 64 E64
CH 65 E65
CH 66 E66
CH 67 E67
CH 68 E68
CH 69 E69
WFT1EK_E3.fm Page 27 Wednesday, January 17, 2001 9:30 AM
5;
'(02
'(02'(02
'(02
The DEMO function automatically demonstrates some of the
TV functions.
To display the DEMO menu:
1
Press the
3
33
3
button to display the MENU
(main menu)
2
Press the
ë
ëë
ë
buttons to choose DEMO.
Then press the
3
33
3
button
1
Press the
ë
ëë
ë
buttons to choose ON
2
Press the
3
33
3
button to complete the
setting
The DEMO function is set to ON, and the demonstration
will start.
To stop the demonstration:
Press one of the buttons on the remote control.
When the DEMO function is set to ON:
Each time the TV is turned on, the demonstration starts
automatically. If you do not want that to happen, cancel
the DEMO function:
1 Display the DEMO menu again
2 Press the
ë
ëë
ë
buttons to choose OFF
3 Press the
3
33
3
button to cancel the DEMO
function
WFT1EK_E3.fm Page 28 Wednesday, January 17, 2001 9:30 AM
5<
2WKHU#PHQXV
2WKHU#PHQXV2WKHU#PHQXV
2WKHU#PHQXV
'RZQORDGLQJ#GDWD#WR#D#9&5
'RZQORDGLQJ#GDWD#WR#D#9&5'RZQORDGLQJ#GDWD#WR#D#9&5
'RZQORDGLQJ#GDWD#WR#D#9&5
You can send to the latest programme numbers (PR) data to
a VCR with the T-V LINK function.
You can only do this when a T-V LINK compatible VCR is
connected to the EXT-2 terminal.
This only works when the T-V LINK menu is being
displayed.
1
Turn on the VCR
2
Press the
3
33
3
button
The data transmission begins.
The T-V LINK menu disappears once the data
transmission ends.
When the T-V LINK menu changes over to
another menu:
The TV has finished its menu. This new menu is
opperated from the VCR. See the VCR instruction
manual for what to do next.
If “FEATURE NOT AVAILABLE” appears at the T-V
LINK menu, check the following three items. Then
press the
3
33
3
button to retry data transmission.
Has a T-V LINK compatible VCR been
connected to the EXT-2 terminal?
Has the VCR power been turned on?
Does the SCART cable that connects the EXT-2
terminal to the T-V LINK compatible VCR have all
its proper connections?
8VLQJ#WKH#'(&2'(5#+(;705,##
8VLQJ#WKH#'(&2'(5#+(;705,##8VLQJ#WKH#'(&2'(5#+(;705,##
8VLQJ#WKH#'(&2'(5#+(;705,##
IXQFWLRQ
IXQFWLRQIXQFWLRQ
IXQFWLRQ
If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT-2 terminal, use
the DECODER (EXT-2) function to unscramble the
scrambled TV channels.
1
Turn on the decoder power
2
Display the scrambled TV channel on the
TV
Even if the decoder is working, a scrambled picture
appears.
3
Press the
3
33
3
button to display the MENU
The MENU (main menu) appears.
4
Press the
ë
ëë
ë
buttons to choose
FEATURES. Then press the
3
33
3
button.
The FEATURES menu appears.
5
Press the
ë
ëë
ë
buttons to choose
DECODER (EXT-2) . Then press the
ì
ìì
ì
buttons to choose ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2) function:
Press the
ì
ìì
ì
buttons to choose OFF.
6
Press the
3
33
3
button to complete the
setting
The T-V LINK menu appears.
7
Follow “Downloading data to a VCR” on
page 29 to transmit the programme
number (PR) data to the VCR
8
If you have another TV channel you want to
unscramble using a decoder, repeat steps
2 to 7.
If the DECODER (EXT-2) function has been set to
“ON” but the TV channel cannot be unscrambled,
check the following:
Has the decoder been connected to the VCR
properly according to the VCR and decoder
instruction manuals?
Has the decoder power been turned on?
Can the TV channel be unscrambled with a
decoder?
Do you need to change the VCR settings in order
to connect the decoder? Confirm that the VCR is
set properly by rechecking the VCR Instruction
manual.
WFT1EK_E3.fm Page 29 Wednesday, January 17, 2001 9:30 AM
63
)XUWKHU#SUHSDUDWLRQ
)XUWKHU#SUHSDUDWLRQ)XUWKHU#SUHSDUDWLRQ
)XUWKHU#SUHSDUDWLRQ
&RQQHFWLQJ#H[WHUQDO#HTXLSPHQW
&RQQHFWLQJ#H[WHUQDO#HTXLSPHQW&RQQHFWLQJ#H[WHUQDO#HTXLSPHQW
&RQQHFWLQJ#H[WHUQDO#HTXLSPHQW
Connect the equipment to the TV, making the correct rear
panel and front panel connections.
Before connecting anything:
Read the manuals that came with the equipment.
Depending on the equipment, the connection method
may be different from the diagram. Also, the equipment
settings may need to change depending on the
connection method.
Turn off all the equipment including the TV.
The “Specifications” on page 34 give the details of the
EXT terminals. If you are connecting equipment not listed
in the following connection diagram, see the table to
choose the best EXT terminal.
Connecting cables are not supplied.
1 VCR (composite signal)
2 VCR (composite signal/S-VIDEO signal)
3 T-V LINK compatible VCR (composite signal/S-VIDEO
signal)
4 Decoder
5 DVD player (composite signal/S-VIDEO signal)
6 DVD player (composite signal/RGB signal)
7 TV game (composite signal/RGB signal)
8 TV game (composite signal/S-VIDEO signal)
9 Headphones
0 Camcorder (composite signal/S-VIDEO signal)
- SCART cable
= Audio cable
~ Video cable
! S-VIDEO cable
EXT-1
EXT-2
EXT-3
SS
EXT-1
EXT-2
EXT-3
SS
WFT1EK_E3.fm Page 30 Wednesday, January 17, 2001 9:30 AM
64
Further preparation
(TXLSPHQW#ZKLFK#FDQ#RXWSXW#WKH#
(TXLSPHQW#ZKLFK#FDQ#RXWSXW#WKH#(TXLSPHQW#ZKLFK#FDQ#RXWSXW#WKH#
(TXLSPHQW#ZKLFK#FDQ#RXWSXW#WKH#
609,'(2#VLJQDO#+<2&#VLJQDO,#VXFK#DV
609,'(2#VLJQDO#+<2&#VLJQDO,#VXFK#DV609,'(2#VLJQDO#+<2&#VLJQDO,#VXFK#DV
609,'(2#VLJQDO#+<2&#VLJQDO,#VXFK#DV
DQ#609+6#9&5
DQ#609+6#9&5DQ#609+6#9&5
DQ#609+6#9&5
Connect the equipment to an EXT terminal (but not the
EXT-1 terminal).
You can choose between an S-VIDEO signal (Y/C signal) and
a regular video signal (composite signal). For details of how
to operate the equipment, see “K(S-VIDEO input)” on
page 20.
709#/,1.#FRPSDWLEOH#9&5
709#/,1.#FRPSDWLEOH#9&5709#/,1.#FRPSDWLEOH#9&5
709#/,1.#FRPSDWLEOH#9&5
Be sure to connect the T-V LINK compatible VCR to the
EXT-2 terminal. If not, the T-V LINK function will not work
properly.
When connecting a T-V LINK compatible VCR to the
EXT-2 terminal, be sure to connect the decoder to the
VCR. If not, the T-V LINK function may not work properly.
After you have stored TV channels in the programme
numbers (PR) list, set the DECODER (EXT-2) function for
the programme number (PR) to ON to unscramble a
scrambled TV channel. For details, see “Using the
DECODER (EXT-2) function” on page 29.
&RQQHFWLQJ#KHDGSKRQHV
&RQQHFWLQJ#KHDGSKRQHV&RQQHFWLQJ#KHDGSKRQHV
&RQQHFWLQJ#KHDGSKRQHV
Connect the headphones with a stereo mini-jack (3.5mm
diameter) to the headphone jack at the TV front panel.
When you connect the headphones, the TV speakers go
off.
9LGHR#RU#VRXQG#VLJQDO#RXWSXW#IURP
9LGHR#RU#VRXQG#VLJQDO#RXWSXW#IURP9LGHR#RU#VRXQG#VLJQDO#RXWSXW#IURP
9LGHR#RU#VRXQG#VLJQDO#RXWSXW#IURP
WKH#(;705#WHUPLQDO
WKH#(;705#WHUPLQDOWKH#(;705#WHUPLQDO
WKH#(;705#WHUPLQDO
You can change over the output of the video/sound signal
from the EXT-2 terminal. This is useful when you want to dub
the video/sound from another device onto the VCR connected
to the EXT-2 terminal. For details on how to do this, see
“DUBBING” on page 21.
79#RXWSXW#IURP#WKH#(;704#WHUPLQDO
79#RXWSXW#IURP#WKH#(;704#WHUPLQDO79#RXWSXW#IURP#WKH#(;704#WHUPLQDO
79#RXWSXW#IURP#WKH#(;704#WHUPLQDO
The video/sound signal of a TV channel you are viewing is
always output from the EXT-1 terminal.
Changing over a programme number (PR) also changes
over the TV output from the EXT-1 terminal.
The video/sound signal from an EXT terminal cannot be
output.
Teletext programmes cannot be output.
WFT1EK_E3.fm Page 31 Wednesday, January 17, 2001 9:30 AM
65
79#EXWWRQV#DQG#SDUWV
79#EXWWRQV#DQG#SDUWV79#EXWWRQV#DQG#SDUWV
79#EXWWRQV#DQG#SDUWV
)URQW#SDQHO
)URQW#SDQHO)URQW#SDQHO
)URQW#SDQHO
l
Do not hold the TV by the front panel cover when moving the TV set. If you do, you may break the cover.
5HDU#3DQHO
5HDU#3DQHO5HDU#3DQHO
5HDU#3DQHO
1 Remote control sensor and ECO sensor 5 P
/
buttons / C
CC
C buttons page 10
2 Headphone jack (mini jack) page 30 6 Power lamp pages 5 and 8
3 EXT-4 terminal pages 20 and 30 7 Main power button pages 5 and 8
4
D
DD
D
(Volume) button page 10
8 Aerial socket page 4 0 EXT-2 terminal pages 4, 7, 20 and 30
9 EXT-1 terminal pages 4, 20 and 30 - EXT-3 terminal pages 20 and 30
Push to open
(Behind the cover)
EXT-1
EXT-2
EXT-3
SS
EXT-1
EXT-2
EXT-3
SS
WFT1EK_E3.fm Page 32 Wednesday, January 17, 2001 9:30 AM
66
7URXEOHVKRRWLQJ
7URXEOHVKRRWLQJ7URXEOHVKRRWLQJ
7URXEOHVKRRWLQJ
If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV
repaired. You may be able to fix it easily by yourself. For example, if the mains plug is disconnected from the mains outlet, or the
TV aerial has problems, you may think there is a problem with the TV itself.
Important:
This troubleshooting guide only covers problems whose causes are not easy to decide. If you have a question when you are
operating a function, read the page(s) for that function carefully, not this troubleshooting guide.
If you follow the advice in this troubleshooting guide without any success, unplug the mains plug and ask for your TV to be
repaired. Do not attempt to repair the TV by yourself or to remove the rear cover of the TV.
,I#\RX#FDQQRW#WXUQ#RQ#WKH#79
,I#\RX#FDQQRW#WXUQ#RQ#WKH#79,I#\RX#FDQQRW#WXUQ#RQ#WKH#79
,I#\RX#FDQQRW#WXUQ#RQ#WKH#79
Is the mains plug connected to the mains outlet?
Is the power lamp lit? If not, press the main power button.
1R#SLFWXUH#RU#QR#VRXQG
1R#SLFWXUH#RU#QR#VRXQG1R#SLFWXUH#RU#QR#VRXQG
1R#SLFWXUH#RU#QR#VRXQG
Have you chosen a TV channel with very poor reception? If
so, the BLUE BACK function will be activated: the entire
screen becomes blue, and the sound is muted. If you still
want to view the TV channel, follow the description “BLUE
BACK” on page 22 to try to change the BLUE BACK function
setting to OFF.
Have you connected headphones to the TV?
Connecting headphones to the TV turns off the TV speakers.
3RRU#SLFWXUH
3RRU#SLFWXUH3RRU#SLFWXUH
3RRU#SLFWXUH
If noise (snow) totally block out the picture, there may be a
problem with the aerial or aerial cable. Check the following
to try to solve the problem:
Have the TV and aerial been connected properly?
Has the aerial cable been damaged?
Is the aerial pointing in the right direction?
Is the aerial itself faulty?
If the TV or aerial suffers interference from other equipment,
stripes or noise may appear in the picture. Move any
equipment sach as an amplifier, personal computer, or a
hair drier, that can cause interference away from your TV.
Or try moving the TV. If the aerial suffers interference from
a radio tower or high-voltage wire, please contact your local
dealer.
If the TV suffers interference from signals reflecting from
mountains or buildings, double-pictures (ghosting) will
occur. Try to change the aerial’s direction or replace it with
one with better directionality.
Are your COLOUR SYSTEM settings correct? Follow the
description “COLOUR SYSTEM” on page 18 to try to solve
the trouble.
Have the COLOUR and BRIGHT settings been adjusted
properly? Follow the description “Picture adjustment” on
page 17 to try to adjust them properly.
Videotaping teletext is not recommended because it may
not record correctly.
When a white and bright still image (such as a white dress)
is displayed on the screen, the white part may look as if it is
coloured. This is unavoidable due to the nature of the picture
tube itself, and not due to a TV failure. When the picture
disappears from the screen, the unnatural colours will also
disappear.
3RRU#VRXQG
3RRU#VRXQG3RRU#VRXQG
3RRU#VRXQG
Have you adjusted BASS or TREBLE properly? If not, follow
the description “Sound adjustment” on page 19.
When TV channel reception is poor, it can be hard to hear
stereo or bilingual sound. In this case, follow the
description “STEREO / I•II” on page 19 to hear the sound
more easily by changing it to a mono sound.
,I#WKH#79#GRHV#QRW#UHVSRQG#WR#WKH#
,I#WKH#79#GRHV#QRW#UHVSRQG#WR#WKH#,I#WKH#79#GRHV#QRW#UHVSRQG#WR#WKH#
,I#WKH#79#GRHV#QRW#UHVSRQG#WR#WKH#
UHPRWH#FRQWURO
UHPRWH#FRQWUROUHPRWH#FRQWURO
UHPRWH#FRQWURO
Have the batteries of the remote control worn out? Follow
the description “Putting batteries into the remote control” on
page 4 and replace them with new batteries.
Have you attempted to use the remote control from the sides
or rear of the TV or from more than seven metres away from
the TV ? Use the remote control in the front of your TV or
from less than seven metres away.
When you are viewing a teletext programme, you cannot
operate the menus. Press the
4
button to return to the
ordinary TV programme, and then try operating the menus.
If the TV will not respond suddenly, press the main power
button on the TV and turn off the main power. Press the
main power button again to turn on the TV. If the TV returns
to a normal state, it is not a failure.
2WKHU#LVVXHV
2WKHU#LVVXHV2WKHU#LVVXHV
2WKHU#LVVXHV
When the SLEEP TIMER function operates, the TV is
automatically turned off. If the TV is turned off suddenly, try
to press the
=
(standby) button to turn on the TV once
again. If the TV goes back to normal, there is no problem.
When a WSS signal is included in the broadcast signal or
the signal from an external device, or when the TV is
receiving a control signal from an external device, the
ZOOM mode will change automatically. When you want to
return to the previous ZOOM mode, press the 5
55
5 button to
choose the ZOOM mode again.
If you bring a magnetised device such as a speaker near to
your TV, the picture may be warped or unnatural colors now
appear at the corners of the screen. In this case, keep the
device away from your TV. If speakers cause this to happen,
use magnetic-shielded speakers instead.
The TV may make a crackling sound due to a sudden
change in temperature. The picture or sound may be nomal.
If you hear crackling sounds frequently while you are
viewing the TV, there may be other causes. As a precaution,
ask your service technician to inspect it.
Touching the screen may cause you to feel a slight electric
shock due to its static electricity. This is unavoidable due to
the construction of the picture tube. It is not a problem with
the TV. You can rest assured that this static discharge is not
harmful.
WFT1EK_E3.fm Page 33 Wednesday, January 17, 2001 9:30 AM
67
6SHFLILFDWLRQV
6SHFLILFDWLRQV6SHFLILFDWLRQV
6SHFLILFDWLRQV
* A basic model number. The actual model number may have characters added (such as “S” for silver) showing the
colour of the TV set.
We may change the design and specifications without notice.
Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration
purpose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as
this would be an infringement of copyright.
Model
Item
AV28WT5EK*
AV24WT5EK*
Broadcasting systems CCIR I
Colour systems PAL
The EXT terminals also support the NTSC 3.58/4.43 MHz system.
Channels and frequencies
E21-E69
Sound-multiplex systems NICAM (I) system
Teletext systems FLOF (Fastext), WST (World Standard Text)
Power requirements 220 - 240 V AC, 50 Hz
Power consumption Maximum: 156 W, Average: 122 W,
Standby: 0.8 W
Maximum: 127 W, Average: 92 W,
Standby: 0.8 W
Picture tube size Viewable area 66 cm (measured diagonally)
Viewable area 56 cm (measured diagonally)
Audio output Rated Power output: 5 W + 5 W
Speakers (10 cm
×
3 cm) oval
×
2
EXT-1 terminal Euroconnector (21-pin, SCART)
Video input, Audio L/R inputs and RGB inputs are available.
TV broadcast outputs (Video and Audio L/R) are available.
EXT-2 terminal Euroconnector (21-pin, SCART)
Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
Video and Audio L/R outputs are available.
T-V LINK functions are available.
EXT-3 terminal Euroconnector (21-pin, SCART)
Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
EXT-4 terminal RCA connectors
×
3
S-VIDEO connector
×
1
Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
Headphone jack Stereo mini-jack (3.5 mm in diameter)
Dimensions (W
×
H
×
D) 716 mm
×
489 mm
×
496 mm 645 mm
×
427 mm
×
443 mm
Weight 34.2 kg 23.1 kg
Accessories Remote control unit
×
1 (RM-C55 (Silver) or RM-C51 (Black) is supplied.)
AAA/R03 dry cell battery
×
2
WFT1EK_E3.fm Page 34 Wednesday, January 17, 2001 9:30 AM
68
Specifications
WFT1EK_E3.fm Page 35 Wednesday, January 17, 2001 9:30 AM
AV28WT5EK/AV24WT5EK
LCT0899-001B-U
0101-T-CR-JMUK
©2001 VICTOR COMPANY OF JAPAN, LIMITED
AV28WT5EK
AV24WT5EK
Contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
T-V LINK functions. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using your TV–the basics . . . . . . . . . . . . . . . . . . . . . 8
Remote control buttons and functions
. . . . . . . . . . . . 11
Using the TV’s menus . . . . . . . . . . . . . . . . . . . . . . . 16
Picture setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Picture features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Sound setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
EXT SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Other menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Further preparation . . . . . . . . . . . . . . . . . . . . . . . . . 30
TV buttons and parts . . . . . . . . . . . . . . . . . . . . . . . . 32
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Colour Television
INSTRUCTIONS
AV32EK_cover.fm Page 1 Wednesday, January 17, 2001 1:53 PM
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC av 24wt 5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC av 24wt 5 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info