Handleiding JVC UXMD9000R (pagina 27 van 33) (Engels)

29873

Verklein

Vergroot

Pagina terug

1/33

Pagina verder

English

■

6. Press the TIMER/SNOOZE button on the

Unit.

The timer setting is completed and the display returns to the dis-

play before you set the timer. The timer indicator remains lit.

■

7. Before turning off the System, prepare the

music source selected in step 4.

TUNER: Tune in to the desired station.

TUNER REC: Tune in to the desired station and insert an MD

for recording the station.

CD: Insert a CD.

MD: Insert an MD.

■

8. Press the button to turn off the System.

To cancel the timer, press the TIMER/SNOOZE button. The

Timer indicator goes out on the display.

To re-activate the cancelled timer, press the TIMER/

SNOOZE button to light the Timer indicator. Then, press the TIM-

ER/SNOOZE button until the display returns to the original display.

To confirm the timer settings, cancel the timer once by press-

ing the TIMER/SNOOZE button. Then, press the TIMER/

SNOOZE button repeatedly, to see the current timer settings (ON

time, OFF time, source, and volume).

To change the timer setting, repeat the setting procedure from

the beginning.

• When the timer turns on, the Timer indicator starts blinking

and the volume level gradually increases from 0 (zero) to the

preset level, except when you set the volume level to “– –” in

step 5.

CAUTION: If the System is unplugged, or a power

failure occurs, the timer setting will be lost. You

will need to reset the clock first, then the timer.

5-Minute Snoozing —————————

When the timer turns on the music source you can, if you wish, ac-

tivate the 5-minute snoozing function to temporarily stop playback.

Press the TIMER/SNOOZE button on the Unit.

The “SNOOZE” indicator lights up on the display and the power is

turned off for five minutes for snoozing.

Use the Sleep Timer to turn the System off after a certain number of

minutes when it is playing. By setting the Sleep Timer, you can fall

asleep to music and know that your System will turn off by itself

rather than play all night.

■

You can only set the Sleep Timer when the System is on and a

source is playing.

■

1. Play a CD, MD, or tune in to the desired sta-

tion.

■

2. Press the SLEEP button on the Remote

Control.

The "SLEEP" indicator lights up.

■

3. Set the length of time you want the source

to play before shutting off.

• Each time you press the SLEEP button, it changes the number

of minutes shown on the display in this sequence:

= 30 = 60 = 90 = 120 = Cancelled = (back to the begin-

ning)

After setting the number of minutes for the Sleep Timer, the display

will stop blinking and return to the display as before setting the

Sleep Timer. (The display is dimmed.)

The System is now set to turn off after the number of minutes you

set.

To Confirm the Sleep Time

When the SLEEP button is pressed, the remaining sleep time is dis-

played. Wait until the display returns to the original display.

To Cancel the SLEEP Timer Setting

Press the SLEEP button until the “SLEEP” indicator goes out on the

display.

Turning off the System also cancels the SLEEP Timer.

■

If you are setting the Daily Timer, the System will be turned on

at the set time to wake you up.

Setting the SLEEP Timer

■■

Information on MDs (Minidiscs)

This is a new digital audio disc format: it has a diameter of 64 mm and enables up to 74 minutes of playback and recording.

The cartridge

The diameter of the disc itself is 64 mm, smaller than a CD single.

The disc sits inside a 68 x 72 mm cartridge, which also being pocket

size, makes minidiscs extremely handy for carrying and storage.

Since the disc is protected by the cartridge, dust and dirt cannot eas-

ily get into it. And thanks to a shutter which is closed at all times

except during use, there is no need to worry about scratches or fin-

ger marks, making the handling of minidiscs very simple.

Two types of minidisc

There are two types of minidisc, “recordable MDs” and “playback-

only MDs.” The playback method for each is the same: a laser irra-

diates the disc and the signal is read from the beam which comes

back. However, the recording method for each type is different.

Playback-only MD

This is the type used for commercially-available pre-recorded MDs,

on which recording cannot be done. Like a CD, data is recorded

based on the presence or absence of small indentations called pits.

A disc recorded with this format is called an “optical disc.”

Recordable MDs

These are the so-called “blank” MDs you can use to make your own

recordings. Data is recorded by magnetism, which is easily proc-

essed, so that recording can be done again and again. By using a la-

ser to heat the disc, the magnetism is erased and the magnetic head

records the new data. Discs with this type of recording method are

called magneto-optical (MO) discs.

Cartridge

Disc

Shutterc

SOUND

Ux-MD9000-e.fm Page 23 Tuesday, June 23, 1998 9:38 AM

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

JVC UXMD9000R Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info