57249
50
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
MICRO COMPONENT SYSTEM
UX-G950V
—Consists of CA-UXG950V and SP-UXG950V
SUPER VIDEO
INSTRUCTIONS
GVT0254-001A
[B]
Cover_UX-G950V[B].indd 1Cover_UX-G950V[B].indd 1 08.4.15 5:26:37 PM08.4.15 5:26:37 PM
G-1
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover or cabinet. There are
no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation
when open. Do not view directly with optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE
THE UNIT.
CAUTION
• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get
out.)
• Do not place any naked flame sources, such as lighted
candles, on the apparatus.
• When discarding batteries, environmental problems must
be considered and local rules or laws governing the disposal
of these batteries must be followed strictly.
• Do not expose this apparatus to rain, moisture, dripping
or splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
CAUTION:
Excessive sound pressure from earphones or headphones can
cause hearing loss.
Dear Customer,
This apparatus is in conformance with the valid European
directives and standards regarding electromagnetic
compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Warnings, Cautions and Others
IMPORTANT for the U.K.
DO NOT cut off the mains plug from this equipment. If the
plug fitted is not suitable for the power points in your home
or the cable is too short to reach a power point, then obtain
an appropriate safety approved extension lead or consult
your dealer.
BE SURE to replace the fuse only with an identical approved
type, as originally fitted.
If nonetheless the mains plug is cut off ensure to remove the
fuse and dispose of the plug immediately, to avoid a possible
shock hazard by inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains plug then
follow the instructions given below:
IMPORTANT:
DO NOT make any connection to the terminal which is
marked with the letter E or by the safety earth symbol or
coloured green or green-and-yellow.
The wires in the mains lead on this product are coloured in
accordance with the following code:
Blue: Neutral
Brown: Live
As these colours may not correspond with the coloured
markings identifying the terminals in your plug proceed as
follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.
CAUTION
The
button in any position does not disconnect the mains
line.
Disconnect the mains plug to shut the power off completely (the
STANDBY lamp goes off).
The MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
• When the system is on standby, the STANDBY lamp lights red.
• When the system is turned on, the STANDBY lamp goes off.
The power can be remote controlled.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
Safety_UX-G950V[B].indd 1Safety_UX-G950V[B].indd 1 08.4.14 4:35:30 PM08.4.14 4:35:30 PM
G-2
Information for Users on Disposal of Old equipment
Attention:
This symbol is only valid in
the European Union.
[European Union]
This symbol indicates that the electrical and electronic equipment should not be disposed as general
household waste at its end-of-life. Instead, the product should be handed over to the applicable
collection point for the recycling of electrical and electronic equipment for proper treatment, recovery
and recycling in accordance with your national legislation.
By disposing of this product correctly, you will help to conserve natural resources and will help
prevent potential negative effects on the environment and human health which could otherwise
be caused by inappropriate waste handling of this product. For more information about collection
point and recycling of this product, please contact your local municipal office, your household waste
disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
(Business users)
If you wish to dispose of this product, please visit our web page www.jvc-europe.com to obtain
information about the take-back of the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national legislation
or other rules in your country for the treatment of old electrical and electronic equipment.
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1. Front: No obstructions and open spacing.
2. Sides/Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or
more.
Front view Side view
Safety_UX-G950V[B].indd 2Safety_UX-G950V[B].indd 2 08.4.14 4:35:32 PM08.4.14 4:35:32 PM
1
How to Read This Manual
Button and control operations are explained in the table
below.
Some related tips and notes are explained later in
the sections “Learning More about This System”
and “Troubleshooting,” but not in the same section
explaining the operations (
INFO
indicates that the
content has some information).
Indicates that you press the button briefly.
Indicates that you press the button briefly
and repeatedly until the option you want
is selected.
Indicates that you press one of the buttons.
2
sec.
Indicates that you press and hold the
button for a specified period.
Indicates that you turn the control in the
specified direction(s).
Remote
ONLY
Indicates that this operation is only
possible using the remote control.
Main Unit
ONLY
Indicates that this operation is only
possible using the main unit.
How to cancel the demonstration
Press and hold DEMO button on the main unit (until
“DEMO CLR” appears on the display) while on standby.
Refer to the attached sheet “Information about the
demonstration function.”
Introduction
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete
understanding and to obtain the best possible performance from the System.
Precautions
Installation
Install the System in a location with adequate ventilation
to prevent internal heat build-up in the System.
DO NOT install the System in a location near
heat sources, or in a place subject to direct
sunlight, excessive dust or vibration.
Install in a place which is level, dry and neither too hot
nor too cold—between 5°C and 35°C.
Leave sufficient distance between the System and the TV.
Keep the speakers away from the TV to avoid
interference with the TV.
Power sources
When unplugging the System from the wall outlet, always
pull on the plug, not the power cord.
DO NOT handle the power cord with wet
hands.
Moisture condensation
Moisture may condense on the lens inside the System in the
following cases:
After starting to heat the room
In a damp room
If the System is brought directly from a cold to a warm
place.
Should this occur, the System may malfunction. In this
case, leave the System turned on for a few hours until the
moisture evaporates, unplug the power cord, then plug it
in again.
Internal heat
Make sure there is good ventilation around the System.
Poor ventilation could overheat and damage the System.
DO NOT block the ventilation openings or
holes. If they are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.
Others
Should any metallic object or liquid fall into the System,
unplug the power cord and consult your dealer before
operating any further.
DO NOT disassemble the System since there
are no user serviceable parts inside.
If you are not going to operate the System for an
extended period of time, unplug the power cord from the
wall outlet.
If anything goes wrong, unplug the power cord and consult
your dealer.
EN_UX-G950V[B]5.indb 1EN_UX-G950V[B]5.indb 1 08.4.18 5:31:51 PM08.4.18 5:31:51 PM
2
Connections ............................................................ 4
Preparing the remote control ............................................... 6
Display Indicators .................................................... 7
Daily Operations—Playback .................................... 8
Listening to the Radio ......................................................... 9
Listening to the TV Sound ................................................. 10
Playing Back a Disc/USB Mass Storage Class Device ..... 10
Playing Back a Digital Audio Player ................................. 12
Daily Operations—Sound & Other Adjustments ......... 13
Adjusting the Volume ......................................................... 13
Adjusting the Sound ........................................................... 13
Creating a Soothing Tone for Your Ear
—MY SOUND ................................................................. 14
Creating 3-Dimensional Sound Field—3D Phonic ........ 15
Making Dialogues Clear—Clear Voice ............................ 15
Presetting Automatic DVD Sound Increase Level ......... 16
Changing the Display Brightness ...................................... 16
Setting the ECO (ecology) Mode ....................................... 16
Changing the Scanning Mode ........................................... 16
Changing the Picture Tone ................................................ 17
Setting the Clock .................................................................. 18
Turning Off the Power Automatically ............................. 18
Advanced Radio Operations ...................................... 19
Receiving FM Stations with Radio Data System ............. 19
Searching for a Program by PTY Codes ........................... 19
Switching Temporarily to a Program of Your Choice
Automatically ................................................................... 20
Unique Video Disc/File Operations ............................ 21
Selecting the Audio Track .................................................. 21
Selecting the Subtitle Language ......................................... 22
Special Effect Playback ........................................................ 23
Advanced Playback Operations ................................. 24
Programming the Playing Order—Program Play ........... 24
Playing at Random—Random Play .................................. 25
Playing Repeatedly .............................................................. 26
Prohibiting Disc Ejection—Child Lock ............................ 26
Recording and Editing Operations ............................. 27
Recording from a Disc ........................................................ 28
Giving (Editing) Titles to Tracks or Groups ................... 28
Erasing the Tracks or Groups ............................................ 30
On-Screen Operations .............................................. 31
On-screen Bar Operations ................................................. 31
Control Screen Operations ................................................ 34
Daily Timer Operations ............................................. 36
Setting the Daily Timer ....................................................... 36
Setup Menu Operations ............................................ 38
Initial Settings ...................................................................... 38
Additional Information ............................................ 40
Learning More about This System .................................... 40
Maintenance ......................................................................... 42
Troubleshooting .................................................................. 43
Display Messages for Recording or Editing
Operations ........................................................................ 44
Language Code List ............................................................. 45
Optical Digital Out Signals ................................................ 46
Operating JVC’s TVs Using the Remote Control ........... 46
Specifications ....................................................................... 47
Parts Index ............................................................. 48
Contents
EN_UX-G950V[B]5.indb 2EN_UX-G950V[B]5.indb 2 08.4.18 5:31:56 PM08.4.18 5:31:56 PM
3
Playable Disc/File Types
DIGITAL VIDEO
SUPER VIDEO
COMPACT
DIGITAL AUDIO
CD-R/-RW: Recorded in the Audio CD, Video
CD, and SVCD formats. MP3, WMA, WAV,
JPEG, MPEG-1, MPEG-2 and DivX files written in
accordance with the “ISO 9660” format can also be
played.
DVD-R/-RW, +R/+RW: Recorded in the DVD Video
format. MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2
and DivX files written in the UDF-Bridge format can
also be played.
DVD-R/-RW: Recorded in the DVD Video Recording
(VR) format.
DVD-ROM: Recorded in the MP3, WMA, WAV
format.
USB mass storage class device: MP3, WMA, WAV,
JPEG, MPEG-1, MPEG-2 and DivX* files.
In addition to the above discs/files, this System can
play back audio data recorded on CD-Extra and CD-G
(CD-Graphics).
The following discs cannot be played back:
DVD-RAM, CD-I (CD-I Ready), CD-ROM, and Photo
CD.
Playing back these discs will generate noise and damage
the speakers.
CD Text and DVD Text can be played, but Text
information will not be shown on the display.
In this manual, “file” and “track” are used
interchangeably.
It is possible to play back finalized +R/+RW (DVD Video
format only) discs. DVD indicator lights on the front
display panel when a +R/+RW disc is loaded.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
This System can play back EVERIO files (see page 41)
recorded on DVD, CD*, and USB mass storage class
device*.
* Only when the maximum bit rate is less than 2 Mbps.
About color system
This System is compatible with PAL video format. You
cannot play back NTSC discs properly.
Note on Region Code
DVD players and DVDs have their own Region Code
numbers. This System can play back only DVDs with
Region Code numbers including “2.”
“RG ERROR” appears if DVD with other Region Code is
loaded.
Ex.:
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with
the “Compact Disc Digital Audio” standard. Therefore,
the use of the Non-DVD side of a DualDisc in this product
may not be recommended.
IMPORTANT: Before playing a disc/file, make sure of the
following...
Turn on the TV and select an appropriate input mode
on the TV to view the pictures or on-screen displays.
For disc/file playback, you can change the initial setting
to your preference. See “Setup Menu Operations” on
page 38.
If “
” appears on the TV screen when you press a
button, the disc/file cannot perform the operation you
have tried to do.
When playing a multi-channel encoded software, the
System properly converts the multi-channel signals into
2 channels, and emits the downmixed sound from the
speakers. To enjoy the powerful sound of these multi-
channel encoded software, connect a proper decoder
or an amplifier with a proper built-in decoder to the
OPTICAL DIGITAL OUT terminal on the rear.
EN_UX-G950V[B]5.indb 3EN_UX-G950V[B]5.indb 3 08.4.18 5:31:57 PM08.4.18 5:31:57 PM
4
Connections
INFO
Do not connect the power cord until all other
connections have been made.
Connect AV (SCART) directly to the video input of your
TV. Connecting AV (SCART) to a TV via a VCR may
interfere with your viewing when playing back copy-
protected discs/files. Connecting AV (SCART) to an
integrated TV/VCR system may also interfere with your
viewing.
Supplied accessories
Check to be sure that you have all the following items.
FM antenna (×1)
AM loop antenna (×1)
Remote control, RM-SUXG500VR (×1)
• Batteries (×2)
• Core filter (×1), see page 44 for details
If any items are missing, consult your dealer
immediately.
Rear panel
~ From AM/FM antenna
See page 5.
Ÿ From the speakers
See page 5.
@ From the digital input of digital audio
component
See page 5.
! From the powered subwoofer
See page 6.
From the input of TV/monitor
See page 6.
¤ To a wall outlet
Plug in the power cord only after all connections
have been completed.
Front panel
From the digital audio player
See page 6.
From the USB mass storage class device
See page 6.
To the headphones
EN_UX-G950V[B]5.indb 4EN_UX-G950V[B]5.indb 4 08.4.18 5:31:58 PM08.4.18 5:31:58 PM
5
~ AM/FM antenna
To assemble the AM loop antenna
To connect AM/FM antenna
For better FM reception
Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75 Ω wire with coaxial type
connector (IEC or DIN45325).
AM loop antenna (supplied)
Turn it until the best reception is obtained.
If the cords are covered with vinyl,
remove the vinyl to expose the tip of the
cord by twisting the vinyl.
FM antenna (supplied)
Extend it so that you can obtain the
best reception.
FM outdoor antenna
(not supplied)
Ÿ Speakers
When connecting the speaker cords, match the polarity
of the speaker terminals: red to (+) and black to (–)
DO NOT connect more than one speaker to
each terminal.
DO NOT push or pull the speakers as this
will damage the foot spacers at the bottom of
the speakers.
! Digital audio component
Set “DIGITAL AUDIO OUTPUT” in the “AUDIO”
menu correctly according to the connected digital audio
equipment (see page 39).
The digital signal through the OPTICAL DIGITAL OUT
terminal is transmitted only when “DVD/CD” is selected
as the source.
Insert Release
Red
Black
From right speaker From left speaker
Press and hold
Optical digital cord
(not supplied)
Protective cap
Red
Black
EN_UX-G950V[B]5.indb 5EN_UX-G950V[B]5.indb 5 08.4.18 5:31:59 PM08.4.18 5:31:59 PM
6
To connect the powered subwoofer
The connected subwoofer can reproduce the bass sounds
recorded in front left and right channels, but cannot
reproduce the LFE signals encoded in multi-channel
software.
Before plugging the System to the power supply, make
sure that the powered subwoofer is turned off.
@ TV/monitor
Connect either component cord or SCART cord.
This connection allows you to use the progressive
scanning mode. To select progressive (PROGRE)
scanning mode (see page 16), use VIDEO OUT
(COMPONENT) jacks.
This connection sends the
video signal (Composite, Y/C,
or RGB) and receives audio
signal from TV. To listen to
the TV sound, see page 10.
After connecting a TV, select the appropriate video
signal output according to the connection method. See
“Changing the Scanning Mode” on page 16.
When connecting a USB mass storage class device
From the powered subwoofer
(not supplied)
Green
Red
Blue
Component video
cord (not supplied)
SCART cord
(not supplied)
On the front panel
When connecting with a USB cable, use the USB 2.0 cable
whose length is less than 1 m.
You can connect a USB mass storage class device such as
a USB flash memory device, hard disk drive, multimedia
card reader, etc. to this System.
You cannot connect a computer to the USB MEMORY
REC/PLAY (
) terminal of the System.
You cannot connect JVC Everio camcorder to the USB
MEMORY REC/PLAY (
) terminal of the System.
Noise and static electricity may stop the USB mass
storage class device sound. In this case, disconnect and
connect the USB mass storage class device again after
turning off the System.
When connecting a digital audio player
Preparing the remote control
Insert the battery into the remote control by matching the
polarity (+ and –) correctly.
If the range or effectiveness of the remote control decreases,
replace both batteries.
Caution
Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.
When using the remote control
Point the top of the remote control towards the remote
sensor as directly as possible. If you operate it from a
diagonal position, the operating range (approx. 5 m) may
be shorter.
Stereo mini plug (not supplied)
On the front panel
From audio output (or
headphone out, etc.)
USB cable (not supplied)
EN_UX-G950V[B]5.indb 6EN_UX-G950V[B]5.indb 6 08.4.18 5:32:00 PM08.4.18 5:32:00 PM
7
Display Indicators
The indications on the display tell you a lot of things while you are operating the System.
Before operating the System, be familiar with when and how the indicators illuminate on the display.
q FM reception indicators
ST (stereo): lights while an FM stereo station with
sufficient signal strength is tuned in.
MONO (monaural): lights while receiving an FM
stereo station in monaural.
w Daily Timer indicators
: lights when Daily Timer is on standby or is being
set; flashes while it is working.
1/2/3: lights when a Daily Timer (1, 2, or 3) is on
standby or is working; flashes while being set.
e SLEEP indicator
Lights when the Sleep Timer is activated.
r AHB PRO indicator
Lights when AHB Pro (Active Hyper Bass Pro) is
activated.
t USB indicator
Lights when “USB MEM” is selected as the source.
y Main display
While listening to the radio: band (or preset number)
and station frequency appear.
While “AUDIO IN” is selected as the source:
“AUDIO IN” appears.
While “TV” is selected as the source: “TV SOUND”
appears.
While playing a disc or file: current status appears.
u
(EALA surround mode) indicator
Lights when EALA surround sound is activated.
i REC 3 (recording) indicator
Lights when recording started.
o
(My Sound) indicator
Lights when MY SOUND is activated.
; A.STBY (Auto Standby) indicator
Lights when Auto Standby is activated.
Flashes when playback stops with Auto Standby
activated.
1 PRGR. (progressive) indicator
Lights when the progressive scanning mode is
selected.
2 S.TURBO (Sound Turbo) indicator
Lights when Sound Turbo II is activated.
3 RESUME indicator
Lights when the System memorizes the position where
the playback is interrupted.
4 Disc format indicators
SVCD: lights when playing back an SVCD.
VCD: lights when playing back a VCD.
CD: lights when playing back a CD.
DVD: lights when playing back a DVD.
5 Audio format indicators
MP3: lights when an MP3 file is detected.
WMA: lights when a WMA file is detected.
6 Playback mode indicators
PRGM: lights when Program Play is activated.
RND: lights when Random Play is activated.
Repeat Mode indicators:
1
: lights when One Track/File/Chapter/Step
Repeat is activated.
: lights when any Repeat Mode other than above
is activated.
7 3D PHONIC indicator
Lights when 3D Phonic is activated.
8 C. VOICE (Clear Voice) indicator
Lights when Clear Voice is activated.
9 Enhanced Other Networks indicators
TA/News/Info:
Lights to indicate the currently selected program
type for PTY Standby Reception.
Flashes when a program is automatically tuned in
with PTY Standby Reception.
p Radio band indicators
AM: lights when tuning in to an AM station.
FM: lights when tuning in to an FM station.
EN_UX-G950V[B]5.indb 7EN_UX-G950V[B]5.indb 7 08.4.18 5:32:02 PM08.4.18 5:32:02 PM
8
Daily Operations—Playback
In this manual, operations using the remote control
are mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
1 Turn on the power.
The STANDBY lamp on the main unit turns off.
Instead of pressing AUDIO/TV
, the System is
turned on by pressing one of the source buttons.
2 Select the source.
Playback automatically starts if the selected source
is ready.
You can change the display information by pressing
DISP/CHARA. For details, see page 18.
3 Adjust the volume.
To turn off (standby) the System
The STANDBY lamp on the main unit
lights in red.
A small amount of power is always
consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack
on the main unit. The sound will no longer come out
of the speakers. “H-PHONE” appears on the display
for a while. Be sure to turn down the volume before
connecting or putting on the headphones.
Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (standby) the System
with the volume set at an extremely high
level; otherwise, the sudden blast of sound
may damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
Remote control
Number
buttons
EN_UX-G950V[B]5.indb 8EN_UX-G950V[B]5.indb 8 08.4.18 5:32:03 PM08.4.18 5:32:03 PM
9
How to select a number
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press
10, 1,
then 5.
To select number 30, press
10, 3,
then 0.
To select number 125, press
10,
10, 1, 2, then 5.
Listening to the Radio
INFO
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength
is tuned in, the frequency stops changing.
When you repeatedly press the button, the frequency
changes step by step.
To manually stop the search, press either button.
If the FM reception is poor
Remote
ONLY
The MONO (monaural) indicator lights on the display.
Reception will improve though stereo effect is lost—
Monaural reception.
To restore the stereo effect, press the button again. The
MONO (monaural) indicator disappears.
To preset the stations
Remote
ONLY
You can preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset.
You can also store the monaural reception mode for
FM preset stations if it is selected.
2 Activate the preset number entry mode.
Finish the following process while the indication on
the display is flashing.
3 Select a preset number for the station you store.
To select a number, see “How
to select a number” on the left
column.
4 Store the station.
To tune in to a preset station
Remote
ONLY
1 Select the band (FM or AM).
2 Select the preset number for the station you stored.
To select a number, see “How
to select a number” on the left
column.
EN_UX-G950V[B]5.indb 9EN_UX-G950V[B]5.indb 9 08.4.18 5:32:04 PM08.4.18 5:32:04 PM
10
Listening to the TV Sound
You can listen to the TV sound through this System when
the TV is connected using the SCART cord (see page 6).
Playing Back a Disc/USB Mass Storage Class
Device
INFO
To insert a disc
When using an 8 cm disc, place it on the inner circle of
the disc tray.
To close the disc tray, press 0 again.
If you press DVD/CD 6, disc tray closes automatically
and playback starts (depending on how the disc is
programmed internally).
To connect a USB mass storage class device
For connecting a USB mass storage class device, see page
6.
Always set volume level to the minimum level when
connecting or disconnecting a USB mass storage class
device.
To disconnect a USB mass storage class device safely,
turn off the System before disconnecting it.
To play back a disc/USB mass storage class device
To start:
To pause: To stop:
To release, press the same button
again.
You can use the control screen shown on the TV. (For
still/moving picture files, it appears while playback is
stopped.) For details, see page 34.
The System can store the stop point, and when you start
playback again by pressing DVD/CD 6 or USB 6
(even while on standby), it starts from the position where
you have stopped—Resume Play. (RESUME indicator
lights on the display when you stop playback.)
To stop completely while Resume is activated, press
7 twice. (To deactivate Resume, see “RESUME” in
“OTHERS” menu on page 39.)
On-screen guide icons
During playback, the following icons may appear on
the TV:
At the beginning of a scene containing
multi-angle views.
At the beginning of a scene containing
multi-audio sounds.
At the beginning of a scene containing
multi-subtitles.
The following icons will also be shown on the TV to
indicate your current operation.
, , , , ,
To deactivate the on-screen guide icon, see “ON
SCREEN GUIDE” in “OTHERS” menu on page 39.
To select the file type
If different types of playable files (audio/still picture/
moving picture) are recorded, select a file type to play.
You can also select the file type using Setup Menu. See
“FILE TYPE” in “PICTURE” menu on page 38.
USB mass storage class deviceDisc
(See page 12.)
Main Unit
ONLY
(while holding...)
EN_UX-G950V[B]5.indb 10EN_UX-G950V[B]5.indb 10 08.4.18 5:32:05 PM08.4.18 5:32:05 PM
11
To select a title/group
Remote
ONLY
Not applicable for DVD-VR.
While playing...
To select a chapter/track/file
For SVCD/VCD, cancel PBC (see page 12).
While playing...
When you press 4 for the
first time, you will go back to
the beginning of the current
chapter/track/file.
To locate a particular portion
Remote
ONLY
This does not function for JPEG files.
While playing...
For MP3/WMA/WAV/MPEG-1/MPEG-2/DivX files,
the search speed and indications on the TV are different
from those above.
No sound comes out if searching is carried out while
showing the moving picture.
To return to normal playback, press DVD/CD 6 or
USB 6 (depending on the current source).
For DivX/MPEG-1/MPEG-2 files, each time you press
the 3 or 2 button, you can skip to a scene by 30 seconds
or 5 minutes depending on the files.
To locate an item directly
Remote
ONLY
You can select a title/chapter/track/file directly and start
playback.
For DVD Video, you can select a title before starting
playback, while you can select a chapter after starting
playback.
To select a number, see “How to
select a number” on page 9.
To play back using the disc menu
Remote
ONLY
For DVD Video:
1 Show the disc menu.
2 Select an item on the disc menu.
For some discs, you can also select items by entering
the number using the number buttons.
(while holding...)
EN_UX-G950V[B]5.indb 11EN_UX-G950V[B]5.indb 11 08.4.18 5:32:07 PM08.4.18 5:32:07 PM
12
Playing Back a Digital Audio Player
For connecting a digital audio player, see page 6.
You can listen to the digital audio player connected to the
AUDIO IN jack.
Make sure to turn down the volume on the System to
minimum level before starting playback.
To adjust the audio input level
Remote
ONLY
If the sound from the device connected to the
AUDIO IN jack is too loud or too quiet, you can preset the
audio input level through the AUDIO IN jack (without
changing the volume level).
While “AUDIO IN” is selected as the source...
As the number of the level increases, the preset input
level is increased.
For SVCD/VCD with PBC:
While playing a disc with PBC, “PBC” appears on the
display.
When disc menu appears on the TV, select an item on the
menu. Playback of the selected item starts.
To select a number, see “How to
select a number” on page 9.
To move to the next or previous page of the current
menu:
To return to the previous menu:
To cancel PBC, press 7, then select a track by using the
number buttons (see page 9). Playback starts with the
selected track.
To reactivate PBC, press 7 (twice if Resume is turned on),
then press DVD/CD 6.
Moves to the next page.
(See page 10.)
(while holding...)
Moves to the previous page.
(while holding...)
EN_UX-G950V[B]5.indb 12EN_UX-G950V[B]5.indb 12 08.4.18 5:32:09 PM08.4.18 5:32:09 PM
13
Adjusting the Volume
You can adjust the volume level from “VOL MIN” (level 0)
to “VOL MAX” (level 40).
Remote control: Main unit:
To drop the volume in a moment
Remote
ONLY
To restore the volume, press again, or
adjust the volume level.
Adjusting the Sound
INFO
To activate EALA surround mode
As the number of the surround mode increases, the
surround effect becomes stronger.
To reinforce the heavy sound
This boosts the low and high frequency sound—Sound
Turbo II.
When Sound Turbo II is turned on, AHB Pro (see below)
is automatically turned on, and cannot be turned off.
(The AHB PRO indicator does not light even though the
function is turned on.)
To reinforce the bass sound
Remote
ONLY
While Sound Turbo II is off, the richness and fullness of the
bass sound is clearly maintained regardless of how you set
the volume—AHB Pro (Active Hyper Bass Pro).
Daily Operations—Sound & Other Adjustments
(while holding...)
Remote control
Main unit
(Canceled)
(Canceled)
(Canceled)
EN_UX-G950V[B]5.indb 13EN_UX-G950V[B]5.indb 13 08.4.18 5:32:10 PM08.4.18 5:32:10 PM
14
3 Start the measurement.
A test tone comes out of the speakers.
4 Memorize the measurements.
Each time you hear a test tone, press the button. You
hear 5 test tones from the speakers.
5 Select a preset number from 1 to 3 to store the
equalization pattern.
After finishing the measurement, an appropriate
equalization pattern is created and it is shown in white
on the TV screen.
The last equalization pattern stored into the selected
preset number is shown in green.
To return to the measurement, select “EXIT” on the
TV screen then press ENTER/SET.
Canceled
To adjust the tone
Remote
ONLY
You can adjust the bass and treble level from –3 to +3.
To adjust the bass
To adjust the treble
Creating a Soothing Tone for Your Ear
—MY SOUND
INFO
Remote
ONLY
The sound tone you can hear is different in individuals.
MY SOUND creates an appropriate equalization pattern
for your listening condition.
To set up MY SOUND
1 While playing...
2 Enter MY SOUND setup.
“MYSOUND” and “MEASURE” appear alternately on
the display.
Canceled
3
EXIT
1
2
PRESET
MY SOUND
SELECT PRESET 1 TO 3 AND PRESS
THE ENTER KEY TO STORE.
MY SOUND
MEASURING... DATA 1 2 3 4 5
PRESS THE ENTER KEY IMMEDIATELY
AFTER YOU HEAR THE TEST TONE.
ENTER EXIT
On the TV
On the TV
Signal level
Continued on the next page
MY SOUND
SELECT START AND PRESS THE ENTER KEY
TO START MEASUREMENT.
START EXIT
On the TV
EN_UX-G950V[B]5.indb 14EN_UX-G950V[B]5.indb 14 08.4.18 5:32:11 PM08.4.18 5:32:11 PM
15
Canceled
On
(while holding...)
Creating 3-Dimensional Sound Field
—3D Phonic
Remote
ONLY
This only functions while listening to disc/USB mass
storage class device.
This does not function for MPEG-1/MPEG-2/DivX files.
While playing...
ACTION
Suitable for action movies and sports
programs.
DRAMA
Creates natural and warm sound. Enjoy
movies in a relaxed mood.
THEATER
Enjoy sound effects like in a major theater.
Making Dialogues Clear
—Clear Voice
Remote
ONLY
Clear Voice works for multi-channel software which
contains a center channel signal and for 2-channel software
with 3D Phonic activated.
This only functions while listening to disc/USB mass
storage class device.
(Canceled)
(while holding...)
(Canceled)
6 Store the equalization pattern.
To store other equalization patterns, press the button
again and repeat steps 3 to 6.
To exit MY SOUND setup
To select the preset MY SOUND
Remote
ONLY
This does not function for DivX file.
EN_UX-G950V[B]5.indb 15EN_UX-G950V[B]5.indb 15 08.4.18 5:32:12 PM08.4.18 5:32:12 PM
16
Presetting Automatic DVD Sound
Increase Level
Remote
ONLY
DVD sound is sometimes recorded at a lower level than
other discs and sources. You can set the increase level for
the currently loaded DVD, so you do not have to adjust the
volume when you change the source.
This only functions for DVD Video and DVD-VR.
While “DVD/CD” is selected as the source...
NORMAL
Original recording level.
MIDDLE
Output level is increased (less than
“HIGH”).
HIGH
Output level is increased (more than
“MIDDLE”). [Initial setting]
Changing the Display Brightness
You can dim the display.
While the System is turned on...
DIM 1/2
Dims the display.
AUTO
Dims the display during playback of still/
moving pictures.
Dimmer is canceled when playback stops.
(Canceled)
(while holding...)
Setting the ECO (ecology) Mode
Setting the ECO mode allows you to reduce power
consumption by turning the display off while on standby.
While the System is on standby...
Changing the Scanning Mode
INFO
This System supports progressive scanning.
Select the video signal output according to the type of your
TV. If you connect a progressive TV through the VIDEO
OUT (COMPONENT) jacks, you can enjoy a high quality
picture playback by selecting “PROGRE.”
Before playback...
RGB
For a conventional TV.
Select to send the composite video signals
or RGB signals through the AV (SCART)
terminal.
Y/C
For a conventional TV.
Select to send S-Video signals through the
AV (SCART) terminal.
PROGRE
For a progressive TV.
Select to enjoy a progressive scanned
picture through the VIDEO OUT
(COMPONENT) jacks.
The PRGR. (Progressive) indicator lights
on the display.
(while holding...)
Remote
ONLY
(Canceled)
EN_UX-G950V[B]5.indb 16EN_UX-G950V[B]5.indb 16 08.4.18 5:32:13 PM08.4.18 5:32:13 PM
17
To adjust the picture tone
1 Select “USER1” or “USER2.”
Follow steps 1 and 2 explained in “To select a preset
picture tone.”
2 Select a parameter you want to adjust.
GAMMA
Adjust if the neutral color is bright or
dark (–3 to +3).
BRIGHTNESS
Adjust if the entire picture is bright
or dark (–8 to +8).
CONTRAST
Adjust if the brightness ratio is
unnatural (–7 to +7).
SATURATION
Adjust if the picture is whitish or
blackish (–7 to +7).
TINT
Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS
Adjust if the picture is indistinct
(–8 to +8).
3 Adjust the parameter.
4 Repeat steps 2 and 3 to adjust other parameters.
To clear the screen, press VFP again while holding SHIFT.
Changing the Picture Tone
Remote
ONLY
While showing a playback picture on the TV, you can
select a preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1 While playing, display VFP setting screen.
2 Select a preset picture tone.
NORMAL
Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters and can
store the settings. (See the right
column.)
To clear the screen, press VFP again while holding SHIFT.
(while holding...)
On the TV
EN_UX-G950V[B]5.indb 17EN_UX-G950V[B]5.indb 17 08.4.18 5:32:13 PM08.4.18 5:32:13 PM
18
Turning Off the Power
Automatically
Remote
ONLY
Auto Standby
This only functions while playing a disc or USB mass
storage class device.
A.STBY indicator lights on the display.
When the playback stops, the A.STBY indicator starts
flashing. If no operation is done for about 3 minutes while
the indicator is flashing, the System turns off (standby)
automatically.
Changing the source to “TUNER FM,” “TUNER AM,”
“AUDIO IN,” or “TV SOUND” temporarily deactivates
Auto Standby.
To cancel this function, press and hold SLEEP/A.STBY
again.
Sleep Timer
You can set the shut-off time so that you can go to bed
without turning off the System yourself.
1 Specify the time (in minutes).
2 Wait until the set time disappears.
To check the time remaining until the shut-off time,
press SLEEP/A.STBY once.
If you press the button repeatedly, you can change the
shut-off time.
Setting the Clock
INFO
Remote
ONLY
Without setting the built-in clock, you cannot use Daily
Timers (see page 36).
To exit the clock settings, press CLOCK/TIMER as
required.
To correct a mis-entry during the process, press
CANCEL (while holding SHIFT). You can return to the
previous step.
1 Activate the clock setting mode.
If you have already adjusted the clock before, press
the button repeatedly until the clock setting mode is
selected.
2 Adjust the hour, then the minute.
Now the built-in clock starts working.
To check the current clock time during playback
Ex.: While playing a disc...
* Only while playing back a disc or USB mass storage class
device.
** Only while playing back the following discs/files:
DVD-VR: Program number/Play List number and
chapter number.
MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/DivX
files: Group and file number.
DVD Video: Title and chapter number.
Canceled
EN_UX-G950V[B]5.indb 18EN_UX-G950V[B]5.indb 18 08.4.18 5:32:15 PM08.4.18 5:32:15 PM
19
Advanced Radio Operations
Remote control
Receiving FM Stations with Radio
Data System
Remote
ONLY
Radio Data System allows FM stations to send an additional
signal along with their regular program signals.
This System can receive the following types of Radio Data
System signals.
PS (Program
Service)
Shows commonly known station
names.
PTY (Program
Type)
Shows types of broadcast programs.
RT (Radio Text)
Shows text messages the station
sends.
Enhanced Other
Networks
Provides information about the
types of the programs broadcast by
the Radio Data System stations of
the different networks.
To show the Radio Data System information
While listening to an FM station...
PS
Station names are displayed. “NO PS” will appear
if no signal is sent.
PTY
The broadcast program type is displayed.
“NO PTY” will appear if no signal is sent.
RT
Text messages the station sends are displayed.
“NO RT” will appear if no signal is sent.
Searching for a Program by PTY
Codes
Remote
ONLY
You can locate a particular kind of program from the preset
channels (see page 9) by specifying the PTY codes.
To search for a program using the PTY codes
1 While listening to an FM station...
2 Select a PTY code (see page 20).
3 Start searching.
The System searches for 30 preset FM stations, stops
when it finds the one you have selected, and tunes in to
that station.
If no program is found, “NOTFOUND” appears on
the display.
To stop searching any time during search, press
PTY SEARCH.
To continue searching after it stops on an unwanted station
While the indications on the display are flashing, press
PTY SEARCH again.
Ex.: When “NEWS” is selected
Frequency
(Non-Radio Data System signal)
EN_UX-G950V[B]5.indb 19EN_UX-G950V[B]5.indb 19 08.4.18 5:32:17 PM08.4.18 5:32:17 PM
20
Switching Temporarily to a Program of Your
Choice Automatically
Remote
ONLY
The Enhanced Other Networks function allows the System
to switch temporarily to a preset FM station broadcasting a
program of your choice (TA, NEWS, or INFO).
This function works while listening to an FM station
providing the required signals.
While listening to an FM station...
TA
Traffic announcement in your area
NEWS
News
INFO
Program the purpose of which is to impart
advice in the widest sense
How the Enhanced Other Networks function works:
CASE 1
If a station is not broadcasting the program of your
choice
The System continues tuning in to the current station.
«
When a station starts broadcasting the program of your
choice, the System automatically switches to that station.
The Enhanced Other Networks indicator starts flashing.
«
When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).
CASE 2
If a station is broadcasting the program of your
choice
The System automatically switches to the station. The
Enhanced Other Networks indicator starts flashing.
«
When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).
CASE 3
If the station currently tuned in is broadcasting the
program of your choice
The Enhanced Other Networks indicator starts flashing.
«
When the program is over, the indicator stops flashing
(the function still remains active).
Description of the PTY codes
NEWS: News.
AFFAIRS: Topical program expanding or enlarging
upon the news—debate, or analysis.
INFO: Programs the purpose of which is to impart
advice in the widest sense.
SPORT: Programs concerned with any aspect of
sports.
EDUCATE: Educational programs.
DRAMA: All radio plays and serials.
CULTURE: Programs concerning any aspect of
national or regional culture, including
language, theater, etc.
SCIENCE: Programs about natural sciences and
technology.
VARIED: Used for mainly speech-based programs
such as quizzes, panel games and
personality interviews.
POP M: Commercial music of current popular
appeal.
ROCK M: Rock music.
EASY M: Current contemporary music considered to
be “easy-listening”.
LIGHT M: Instrumental music, and vocal or choral
works.
CLASSICS: Performances of major orchestral works,
symphonies, chamber music, etc.
OTHER M: Music not fitting into any of the other
categories.
WEATHER: Weather reports and forecasts.
FINANCE: Stock Market reports, commerce, trading,
etc.
CHILDREN: Programs targeted at a young audience.
SOCIAL: Programs about sociology, history,
geography, psychology and society.
RELIGION: Religious programs.
PHONE IN: Involving members of the public
expressing their views either by phone or
at a public forum.
TRAVEL: Travel information.
LEISURE: Programs about recreational activities.
JAZZ: Jazz music.
COUNTRY: Songs which originate from, or continue
the musical tradition of the American
Southern States.
NATION M: Current popular music of the nation or
region in that country’s language.
OLDIES: Music from the so-called “golden age” of
popular music.
FOLK M: Music which has its roots in the musical
culture of a particular nation.
DOCUMENT: Programs concerning factual matters,
presented in an investigative style.
TEST: Broadcasts for testing emergency
broadcast equipment or unit.
ALARM: Emergency announcement.
NONE: No program type, undefined program, or
difficult to categorize into particular types.
Classification of the PTY codes for some FM stations may
be different from the above list.
(Canceled)
EN_UX-G950V[B]5.indb 20EN_UX-G950V[B]5.indb 20 08.4.18 5:32:18 PM08.4.18 5:32:18 PM
21
Unique Video Disc/File Operations
Remote control
Selecting the Audio Track
INFO
Remote
ONLY
For DivX files/DVD Video: While playing back a chapter/
file containing several audio languages, you can select the
language to listen to.
For DVD-VR/SVCD/VCD: While playing back a track,
you can select the audio channel to listen to.
For DVD Video/DVD-VR/SVCD/VCD: You can also
select the audio track using the on-screen bar (see page
31).
While playing a DVD Video...
Ex.:
While playing a DivX file...
While playing a DVD-VR or SVCD/VCD...
ST1/ST2/ST
To listen to normal stereo
(2-channel) playback.
L1/L2/L
To listen to the left audio channel.
R1/R2/R
To listen to the right audio channel.
SVCD can have 4 audio channels. SVCD usually uses
these 4 channels to record two 2-channel recordings
(ST1/ST2).
ENGLISH
1/3
3/3
FRENCH
2/3
JAPANESE
ENGLISH
1/3
FRENCH
2/3
JAPANESE
3/3
1/3
2/3
3/3
(while holding...)
ST1 ST2 L1
R2 L2 R1
ST L R
SVCD
DVD-VR/VCD
EN_UX-G950V[B]5.indb 21EN_UX-G950V[B]5.indb 21 08.4.18 5:32:20 PM08.4.18 5:32:20 PM
22
Selecting the Subtitle Language
Remote
ONLY
For DivX files/DVD Video: While playing back a chapter/
file containing subtitles in different languages, you can
select the subtitle language to display on the TV.
For DVD-VR: While playing, you can turn the subtitles on
or off.
For SVCD: While playing, you can select the subtitles even
if no subtitles are recorded on the disc.
For DVD Video/DVD-VR/SVCD: You can also select the
subtitle language using the on-screen bar (see page 31).
While playing a DivX file/DVD Video...
1
2
Ex.:
1/3
3/3
2/3
FRENCH JAPANESEENGLISH
1/3 2/3
JAPANESE
3/3
ENGLISH FRENCH JAPANESE
While playing a DVD-VR...
While playing an SVCD...
To select multi-angle view, use the on-screen bar (see
page 31).
(while holding...)
(while holding...)
(while holding...)
EN_UX-G950V[B]5.indb 22EN_UX-G950V[B]5.indb 22 08.4.18 5:32:21 PM08.4.18 5:32:21 PM
23
Special Effect Playback
INFO
Still picture playback
To display the still picture:
To resume normal playback, press DVD/CD 6 or
USB 6 (depending on the current source).
Frame-by-frame playback
Remote
ONLY
This function is used only while playing DVD Video/
DVD-VR/SVCD/VCD.
1 While playing...
2 Advance the still picture frame by frame.
To resume normal playback, press DVD/CD 6.
Slow-motion playback
Remote
ONLY
This function is used only while playing DVD Video/
DVD-VR/SVCD/VCD.
1 While playing...
2 Select slow motion speed.
* Only available for DVD Video.
To resume normal playback, press DVD/CD 6.
USB mass storage class device
Disc
To replay the previous scenes
(One-Touch Replay)
This function is only used while playing DVD Video/
DVD-VR.
While playing....
The playback position moves back about
10 seconds before the current position
(only within the same title for DVD
Video).
Zoom
Remote
ONLY
1 While playing...
While playing a DVD Video/DVD-VR/SVCD/VCD and MPEG-1/
MPEG-2/DivX file:
While playing a JPEG file (not available during slide-show):
2 Move the zoomed-in position.
To cancel Zoom, press ZOOM (while holding SHIFT)
repeatedly until “ZOOM OFF” appears on the TV.
(while holding...)
ZOOM 1 ZOOM 2 ZOOM 3 ZOOM 4
ZOOM 6 ZOOM 5
ZOOM OFF
ZOOM 1 ZOOM 2
ZOOM OFF
Forward slow motion starts.
Reverse slow motion* starts.
Remote
ONLY
While playing...
EN19-26_UX-G950V[B].indd 23EN19-26_UX-G950V[B].indd 23 08.4.21 9:46:29 AM08.4.21 9:46:29 AM
24
Advanced Playback Operations
Remote control
Number
buttons
Programming the Playing Order
—Program Play
INFO
Remote
ONLY
You can arrange the playing order of the chapters/tracks/
files (up to 99) before you start playback.
Program Play cannot be used for the USB mass storage
class device, DVD-VR and JPEG/MPEG-1/MPEG-2/
DivX files on a disc.
Resume does not work for Program Play.
1 Before starting playback, activate Program Play.
2 Select chapters/tracks/files you want for Program Play
using the number buttons.
To select a number, see “How to select a number” on
page 9.
1 For DVD Video and MP3/WMA/WAV files: Select a
title or group number.
2 Select a chapter or track/file number.
3 Repeat step 2 until you complete your program.
4 Start playback.
Playback starts in the order you have
programmed.
To skip: To pause: To stop:
To release, press
the same button
again.
Main unit
PROGRAM
No Group/Title Track/Chapter
1
2
3
4
5
6
7
8
9
10
On the display
On the TV
Canceled
EN_UX-G950V[B]5.indb 24EN_UX-G950V[B]5.indb 24 08.4.18 5:32:22 PM08.4.18 5:32:22 PM
25
To check the programmed contents
Before or after playback...
You can also use 4 or ¢ to check the programmed
contents.
To modify the program
Before or after playback...
To erase the last step:
To erase the entire program: To add another step
in the program:
Repeat step 2 on page
24.
To exit Program Play
Before or after playback...
(while holding...)
(while holding...)
In the reverse order.
In the programmed order.
Playing at Random
—Random Play
Remote
ONLY
You can play all chapters or tracks at random.
Random Play cannot be used for the USB mass storage
class device, DVD-VR and JPEG/MPEG-1/MPEG-2/
DivX files on a disc.
1 Before starting playback, activate Random Play.
2 Start playback.
Playback starts in random order. Random
Play ends when the entire disc has been
played.
To skip a chapter/
track:
To pause: To stop:
To release, press
the same button
again.
To exit Random Play
Before or after playback...
Canceled
Canceled
Canceled
EN_UX-G950V[B]5.indb 25EN_UX-G950V[B]5.indb 25 08.4.18 5:32:23 PM08.4.18 5:32:23 PM
26
Playing Repeatedly
INFO
Remote
ONLY
For DVD Video/DVD-VR/SVCD/VCD/CD: You can
also select the repeat mode using the on-screen bar (see
pages 32 and 33).
For DVD Video:
While playing...
For CD/SVCD/VCD:
While playing (without PBC for SVCD/VCD) or before
playback...
For DVD-VR:
While playing an Original Program...
While playing a Play List...
For MPEG-1/MPEG-2/DivX/MP3/WMA/WAV files:
While playing or before playback...
For JPEG files during slide-show:
While playing or before playback...
(Canceled)
(Canceled)
(Canceled)
(Canceled)
(Canceled)
REP CHAP * [
1
]
Repeats the current chapter.
REP TTL [
]
Repeats the current title.
REP TRK * [
1
]
Repeats the current track/file.
REP GRP [
]
Repeats the current group.
REP PG [
]
Repeats the current program.
REP PL [
]
Repeats the current Play List.
REP ALL [
]
Repeats all the contents or
programmed tracks/files.
* During Program Play and Random Play, “REP STEP”
appears instead of these indications, and the repeat mode
changes as follows for all discs.
Prohibiting Disc Ejection —Child Lock
You can lock the disc tray so that no one can eject
the loaded disc.
This function is available only while the System is
on standby.
While the disc tray is closed...
To cancel the prohibition, repeat the same procedure.
“UNLOCKED” appears on the display.
(while holding...)
Main Unit
ONLY
REP OFF
REP STEP REP ALL
(Canceled)
(Canceled)
EN_UX-G950V[B]5.indb 26EN_UX-G950V[B]5.indb 26 08.4.18 5:32:25 PM08.4.18 5:32:25 PM
27
Recording and Editing Operations
INFO
Remote control
Before You Start Recording
It should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the
consent of the owner of copyright in the sound or video
recording, broadcast or cable program and in any literary,
dramatic, musical, or artistic work embodied therein.
The recording level is not affected by the volume.
Active Hyper Bass Pro, tone adjustment and/or sound
mode effect (see page 13) does not affect recordings.
Random Play and Repeat mode are canceled in the
recording mode.
You can record up to 999 tracks to the USB device. If
you try to record a track after recording 999 tracks,
“FILEFULL” appears on the display and the track will not
be recorded.
The tracks which are recorded to the USB device will be
converted into MP3 format.
You cannot start recording into a USB device while
“READING” is shown on the display.
Some USB devices have limit of recordable track number
in the root group. Select another group or make a new
group to record tracks when the number of target tracks
to record is over the limit.
Do not disconnect a USB device while playing/recording/
editing. It may cause malfunction.
About SCMS (Serial Copy Management System)
The System uses the Serial Copy Management System
which allows only first-generation digital copies to be made
of premastered software such as regular CDs.
If you try to record from a duplicated CD-R or CD-RW
into the USB device, “SCMS VLT” appears on the display.
1st generation
2nd generation
Number
buttons
Main unit
EN_UX-G950V[B]5.indb 27EN_UX-G950V[B]5.indb 27 08.4.18 5:32:27 PM08.4.18 5:32:27 PM
28
Recording from a Disc
You can record tracks in digital recording from a CD onto
the USB device.
Do not vibrate the System while recording/editing
tracks. Take care especially while “WAIT” is shown on
the display. It may damage the recorded tracks on the
System.
Before recording....
Connect a recordable USB device to the USB MEMORY
REC/PLAY (
) terminal. (See also page 6.)
1 Start and stop playback of the disc.
2 Select the first track you want to record.
The System records from the
track to the last one.
3 Enter recording mode.
4 Select a group to record tracks into.
You can also select a group from a list shown on the
TV screen.
If “NEW GROUP” is selected, the System will
automatically create the new group as “001_group.”
If “001_group” already exists, “002_group,” “003_
group,” etc. will be created.
(on the main unit)
5 Start recording.
Both recording and playback start at the same time.
When playback ends, recording also stops.
You cannot change the source while recording.
If Program Play is activated (see “Programming the
Playing Order—Program Play” on page 24), the tracks
are recorded in the programmed order.
To stop recording
manually:
To record the playing
track (1 track):
During play or pause...
(on the main unit)
Then, repeat step 4 on the
left column.
Giving (Editing) Titles to Tracks
or Groups
INFO
Remote
ONLY
You can give titles (up to 24 characters) to the tracks and
groups (up to 28 characters) in the USB device.
While playing, you cannot edit track/group titles.
1 Start and stop playback of the USB device.
2 Select a track/group you want to edit.
To select a track:
To select a group:
GROUP SELECTION
USE % TO SELECT GROUP.
TO EXIT, PRESS 7.
PLEASE SELECT GROUP IN WHICH YOU WANT TO RECORD.
THEN PRESS ENTER TO START RECORDING.
NEW GROUP
GROUP01
GROUP02
GROUP03
GROUP04
(while holding...)
Continued on the next page
EN_UX-G950V[B]5.indb 28EN_UX-G950V[B]5.indb 28 08.4.18 5:32:27 PM08.4.18 5:32:27 PM
29
When you record tracks into “NEW GROUP” in step 4 of
“Recording from a Disc” on page 28, you can give a group
title before starting to record.
1 After selecting “NEW GROUP” in step 4 of
“Recording from a Disc” on page 28...
2 Edit the group title by following step 5 in the left
column.
3 Finish the procedure.
Recording starts.
See page 44 for more information about the warning
messages shown on the display.
How to enter titles
1 Select the character type.
2 Enter a character.
Several characters are assigned
to one button. Press the button
repeatedly until the desired
character is displayed.
For available characters, refer to
“Available Characters” on page
30.
3 Confirm the entry.
“NO NAME” appears on the display if no characters is
entered in step 2. Enter a title.
3 Select the track/group title editing mode.
TTL EDIT
For editing a track title
GRP EDIT
For editing a group title
4 Confirm the selection.
5 Enter a title.
For entering a title, see “How to enter titles” on the
right column.
You can also enter a title using the TV on-screen.
6 Finish the procedure.
To give title to other groups/tracks, repeat steps 2 to 6.
(Canceled)
(while holding...)
GROUP TITLE EDIT
ABCDE
01234
GROUP01
[0 – 9] KEY ENTER LETTERS
[CANCEL] DELETE A LETTER
[ENTER] REGISTER NEW NAME
CHANGE CHARACTER TABLE
MOVE CURSOR
Ex.: When “GRP EDIT” is selected in step 3
A (upper case)
1 (number)
or
Character type
EN_UX-G950V[B]5.indb 29EN_UX-G950V[B]5.indb 29 08.4.18 5:32:29 PM08.4.18 5:32:29 PM
30
Erasing the Tracks or Groups
Remote
ONLY
You can erase tracks/groups on the USB device.
Once the tracks are erased, you cannot resume them.
1 Start and stop playback of the USB device.
2 Select a track/group you want to erase.
To select a track:
To select a group:
3 Select the track/group erase mode.
TTL DEL
For deleting a track
GRP DEL
For deleting a group
4 Confirm the selection.
To quit erasing, press CANCEL (while holding
SHIFT).
5 Erase your selection.
When you delete the last track in a group, the group is
also deleted.
Available Characters
Button Uppercase character
Numerical
character
(Space) , ! , # , $ , % , & , ’, ( , ) , +, –,
. , = , @ ,
Some symbols may not
appear on the display.
1
ABC 2
DEF 3
GHI 4
JKL 5
MNO 6
PQRS 7
TUV 8
WXYZ 9
—0
To move the character entry position
To erase a character
When the character entry position is on the character you
want to erase...
To enter a space
Select the space from “Symbols.” (See “Available
Characters” above.)
You can also enter a space at the end of a title by pressing
3.
To quit title entry
The entered titles are not stored.
Move the entry position to the
right.
Move the entry position to the left.
(while holding...)
(while holding...)
(Canceled)
(while holding...)
EN_UX-G950V[B]5.indb 30EN_UX-G950V[B]5.indb 30 08.4.18 5:32:30 PM08.4.18 5:32:30 PM
31
On-Screen Operations
Remote control
On-screen Bar Operations
INFO
Remote
ONLY
You can check the source information (disc/USB mass
storage class device) and playback status by using the
on-screen bar (not applicable for MP3/WMA/WAV/JPEG
files). You can also use some functions when playing back
DVD Video/DVD-VR/SVCD/VCD/CD.
On-screen Bar Information
DVD Video
DVD-VR
SVCD
Number
buttons
2
OFF
1/3
1/3 1/3
TIME
4
TITLE
14
TOTAL
1:25:58
CHAP
23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/31/1
TIME 0:00:58
CHAP 3
Dolby D
3/2.1ch
1
3
2
OFF
1/3
1/3 1/3
TIME
4
TITLE
14
TOTAL
1:25:58
CHAP
23
SVCD
TIME OFF ST1
TRACK 3
1
3
1/3
-/4
TIME 0:00:58
PROGRAM
VCD
CD
MPEG-1/MPEG-2/DivX files on a disc
MPEG-1/MPEG-2/DivX files in a USB mass storage class
device
1 Disc/source
2 Playback information
Dolby D Audio format
3/2.1ch, 2/0.0 ch Channel number
PROGRAM, RANDOM Current play mode
TITLE
2
Current title
CHAP
3
Current chapter
TRACK
14
Current track
Current program
Current Play List
TIME 0:00:58
Time indication
3 Operation modes
Playback
/ Forward/Reverse search
/ Forward/Reverse slow-motion
Pause
Stop
4 Function icons (on the pull-down menu)
TIME
Select to change the time indications.
OFF
Select to repeat playback.
Select for time search.
CHAP.
Select for chapter search.
1/3
Select to change the audio language or
channel (see also page 21).
1/3
Select to change subtitle language (see also
page 22).
1/3
Select to change the view angle (see also page
10).
2
OFF
1/3
1/3 1/3
TIME
4
TITLE
14
TOTAL
1:25:58
CHAP
23
VCD
TIME OFF ST
TRACK 3
1
3
TIME 0:00:58
PROGRAM
2
OFF
1/3
1/3 1/3
TIME
4
TITLE
14
TOTAL
1:25:58
CHAP
23
CD
TIME OFF
TRACK 3
1
3
TIME 0:00:58
RANDOM
TOTAL
1:25:58
CHAP
23
FILE
Time 00:00:58
213
TOTAL
1:25:58
CHAP
23
USB
Time 00:00:58
213
EN_UX-G950V[B]5.indb 31EN_UX-G950V[B]5.indb 31 08.4.18 5:32:32 PM08.4.18 5:32:32 PM
32
To operate using the On-screen Bar
Ex.: Selecting a subtitle (French) for DVD Video
While “DVD/CD” is selected as the source...
1 Display the entire on-screen bar.
* This does not appear for MPEG-1/MPEG-2/DivX files.
2 Select (highlight) the item you want.
3 Display the pop-up window.
4 Select the desired option in the pop-up window.
5 Finish the setting.
Pop-up window disappears.
To remove the on-screen bar
OFF
1/3
1/3 1/3
TIME
TITLE
14
TOTAL
1:25:58
CHAP
23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/31/1
TIME 0:00:58
CHAP 3
Dolby D
3/2.1ch
1/3
1/3 1/3
TOTAL
1:25:58
CHAP
23
TITLE 2
1/31/31/1
TOTAL 1:01:58
CHAP 3
ENGLISH
1/3
1/3 1/3
T
ITLE
14
TOTAL
1:25:58
CHAP
23
TITLE 2
1/32/31/1
TOTAL 1:01:58
CHAP 3
FRENCH
To change the time information
You can change the time information on the on-screen bar
and the display on the main unit.
1 While playing, display the entire on-screen bar.
2 Make sure
TIME
is selected (highlighted).
3 Change the time indication.
TIME
Elapsed playing time of the current chapter/
track (not applicable for DVD-VR).
REM
Remaining time of the current chapter/track
(not applicable for DVD-VR).
TOTAL
Elapsed disc time.
T. REM
Remaining time of title (DVD Video)/
program (DVD-VR)/disc (SVCD/VCD).
To remove the on-screen bar
Repeat Play
See also page 26.
1 While playing (without PBC for SVCD/VCD), display
the entire on-screen bar.
Repeat mode can also be selected before starting
playback (not applicable for DVD Video/DVD-VR).
2 Select
OFF
.
3 Display the pop-up window.
OFF
1/3
1/3 1/3
TIME
TITLE
14
TOTAL
1:25:58
CHAP
23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/31/1
TIME 0:00:58
CHAP 3
Dolby D
3/2.1ch
OFF
1/3
1/3 1/3
TIME
TITLE
14
TOTAL
1:25:58
CHAP
23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/31/1
TOTAL 1:01:58
CHAP 3
OFF
Dolby D
3/2.1ch
disappears
Continued on the next page
EN_UX-G950V[B]5.indb 32EN_UX-G950V[B]5.indb 32 08.4.18 5:32:34 PM08.4.18 5:32:34 PM
33
4 Select the repeat mode you want.
A-B
Repeats a desired portion (see below).
TITLE*
Repeats the current title.
ALL
Repeats the disc (not applicable for
DVD) or programmed track.
CHAPTER**
Repeats the current chapter.
TRACK**
Repeats the current track.
OFF
Cancels Repeat Play.
* While playing a DVD-VR, “PG” appears, and while
playing a Play List, “PL” appears.
** During Program Play and Random Play, “STEP”
appears.
5 Finish the setting.
A-B Repeat
You can repeat playback of a desired portion by specifying
the beginning (point A) and the ending (point B).
A–B Repeat cannot be used for MP3/WMA/WAV/JPEG/
MPEG-1/MPEG-2/DivX files and some DVDs.
1 While playing, display the entire on-screen bar.
2 Select
OFF
.
3 Display the pop-up window.
4 Select “A-B.”
5 Select the start point (A).
OFF
1/3
1/3 1/3
TIME
TITLE
14
TOTAL
1:25:58
CHAP
23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/31/1
TOTAL 1:01:58
CHAP 3
OFF
Dolby D
3/2.1ch
1/3
TIME
TITLE
14
C
H
DVD-VIDEO
TITLE 2
TIME A- CHAP. 1/3
C
Dolby D
3/2.1ch
6 Select the end point (B).
A-B Repeat starts. The selected
portion plays repeatedly.
You can search for the end point
using the ¡ button.
To cancel A-B Repeat, repeat steps 1 to 3, and select
“OFF” in step 4.
A-B Repeat will also be canceled when you stop play or
skip the chapter or track.
Time Search
You can move to a particular point by specifying the
elapsed playing time from the beginning.
This function is not available during Program Play and
Random Play.
1 While playing (without PBC for SVCD/VCD), display
the entire on-screen bar.
Time Search can also be used before starting playback
(not applicable for DVD Video/DVD-VR).
2 Select .
3 Display the pop-up window.
4 Enter the time.
You can specify the time in hours/minutes/seconds.
Examples:
To move to a point of 1 (hours):
02 (minutes): 00 (seconds), press
1, 0, 2, 0, then 0.
To move to a point of 54
(minutes): 00 (seconds), press 0, 5,
4, 0, then 0.
It is always required to enter the hour digit (even “0”
hours), but it is not required to enter the final zeros
(the last two digits in the examples above).
To correct a mis-entry, press 2 to erase the last entry.
5 Confirm your entry.
The System starts playing the disc
from the selected playing time.
OFF
1/3
1/3 1/3
TIME
TITLE
14
TOTAL
1:25:58
CHAP
23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/31/1
TIME 0:00:58
CHAP 3
TIME _ : _ _ : _ _
Dolby D
3/2.1ch
OFF
TIME
T
DVD-VIDEO
TIME OFF CHAP.
A–B
Dolby D
3/2.1ch
EN_UX-G950V[B]5.indb 33EN_UX-G950V[B]5.indb 33 08.4.18 5:32:35 PM08.4.18 5:32:35 PM
34
Chapter Search
For DVD Video/DVD-VR: You can search for the chapter
number to play.
This function is not available during Program Play and
Random Play.
1 While playing, display the entire on-screen bar.
2 Select
CHAP.
.
3 Display the pop-up window.
4 Enter the desired chapter number.
Examples:
To select chapter 5, press 5.
To select chapter 10, press 1, then
0.
To select chapter 15, press 1, then
5.
To select chapter 30, press 3, then
0.
To correct a mis-entry, press the number buttons
until the desired number is shown in the pop-up
window.
5 Confirm your entry.
The System starts playing the selected
chapter.
Control Screen Operations
Remote
ONLY
You can search for and play the desired items through the
control screen for DVD-VR and MP3/WMA/WAV/JPEG/
MPEG-1/MPEG-2/DivX files.
Control screen for DVD-VR
The control screen is superimposed onto the TV screen
when you call up Original Program (PG) or Play List (PL).
To select playback type
To display the Original
Programs:
To display the Play Lists:
To remove the list, press the same button again.
CHAPTER _
1/3
1/3 1/3
TIME
TITLE
14
TOTAL
1:25:58
CHAP
23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/31/1
TOTAL 1:01:58
CHAP 3
Dolby D
3/2.1ch
Ex.: When Original Program is selected.
Ex.: When Play List is selected.
1 Listed number
2 Recording/creating date
3 Recording channels
4 Recording time
5 Title
6 Highlight bar (current selection)
7 Chapters included
8 Playback time
To select an item in the list and start playback
If you move the highlight bar while playing back, the
selected item starts playback automatically.
ORIGINAL PROGRAM
No Date Ch Time Title
1 03/12/08 12:15L
L
L
L
L
L
2 09/12/08 23:05
3 18/12/08 08:17
4 20/12/08 07:47
5 25/12/08 19:38 Mr. Lawrence
Satisfy U
La fleur
The last struggle
free flyer
BOOM!
6 28/12/08 14:20
12 3 4 5 6
PLAY LIST
No Date Chap Length Title
1 03/12/08 002 0:23:24 Nebula G.
CDJ
Secret Garden
S. Walker
2 15/12/08 004 1:04:39
3 24/12/08 013 0:41:26
4 27/12/08 017 0:09:08
67 81 2
5
EN_UX-G950V[B]5.indb 34EN_UX-G950V[B]5.indb 34 08.4.18 5:32:37 PM08.4.18 5:32:37 PM
35
Control screen for MP3/WMA/WAV/JPEG/MPEG-1/
MPEG-2/DivX files
The control screen appears on the TV when the System
detects MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/DivX
files on the loaded disc or connected USB mass storage
class device.
For JPEG/MPEG-1/MPEG-2/DivX, it appears when
playback is stopped.
Ex.: While playing an MP3 file on a disc.
1 Current source
FILE: Current source is “DVD/CD.”
USB: Current source is “USB MEM.”
2 Current group number/total group number
3 Current group
4 Group list
5 File information (only for MP3/WMA/WAV files)
6 Current file
7 Random Play/Program Play setting (not applicable for
the files in the USB mass storage class device)
8 Repeat Play setting
9 Elapsed playing time of the current file (not applicable
for JPEG files)
0 Operation status icon
- Current file number/total number of files in the current
group (total number of files on the loaded disc/USB
mass storage class device)
= Highlight bar (current selection)
~ File list
If different types of playable files (audio/still picture/
moving picture) are recorded on a disc or USB mass
storage class device, select a file type to play (see page 10).
Group : 2 / 3
TIME : 00:00:14
Track : 6 / 14 (Total 41)
Spring
Summer
Fall
Winter
Track Information
Cloudy.mp3
Fair.mp3
Fog.mp3
Hail.mp3
Indian summer.mp3
Rain.mp3
Shower.mp3
Snow.mp3
Thunder.mp3
Typhoon.mp3
Wind.mp3
Winter sky.mp3
Title
Rain
Artist
Album
1
2
5
4
9
8
7
0
-
~
=
REPEAT STEP
3
RANDOM
To move the highlight bar between group list and file list
To select an item in the list
Move the highlight bar to the desired
item.
If you move the highlight bar
while playing back an MP3/WMA/
WAV file, the selected track starts
playback automatically.
To start playback
For JPEG:
The selected file (still picture) is
displayed until you change it.
Press one of the buttons
depending on the current source.
Slide-show playback starts. Each
file (still picture) is shown on the
screen for about 3 seconds, then
changes one after another.
To cancel slide-show and
display the current still picture,
press the same button again.
For the other files:
Playback starts with the selected
track.
• Pressing DVD/CD 6 or
USB 6 also starts playback.
Once you start to play back a picture, the control screen
disappears.
To show the control screen, press TOP MENU/PG or
MENU/PL.
Moves the bar to the file list.
Moves the bar to the group list.
USB mass storage class
device
Disc
EN_UX-G950V[B]5.indb 35EN_UX-G950V[B]5.indb 35 08.4.18 5:32:38 PM08.4.18 5:32:38 PM
36
Daily Timer Operations
Remote control
How Daily Timer works
Once the Daily Timer has been set, the timer indicator
(
) and timer number indicator (1/2/3) are lit on
the display. Daily Timer is activated at the same time
everyday until the timer is turned off manually (see “To
turn on or off the Daily Timer” on page 37) or another
timer is activated.
When the on-time comes
The System turns on, tunes in to the specified station or
starts playing from the specified source, and gradually
increases the volume level to the preset level after about
30 seconds.
While Daily Timer is working, the timer indicator
(
) and the timer number indicator (1/2/3) flash on
the display.
When the off-time comes
The System stops playback, and turns off (on standby)
automatically.
The timer setting remains in memory until you change
it.
1 Select one of the timer setting modes you want to
set—DAILY 1 ON time, DAILY 2 ON time, or DAILY
3 ON time.
When the clock has not been set, pressing
CLOCK/TIMER makes the System enter the clock
setting mode (see page 18).
Ex.: When Daily Timer 1 setting mode is selected
ON (Time) ON (Time) ON (Time)
Canceled Clock setting
(See page 18.)
Daily Timer 1 Daily Timer 2 Daily Timer 3
Continued on the next page
Setting the Daily Timer
INFO
Remote
ONLY
Using Daily Timer, you can wake up with your favorite
music.
You can store three Daily Timer settings; however, you can
activate only one of the timers at any one time.
To exit the timer settings, press CLOCK/TIMER as
required.
To correct a mis-entry during process, press CANCEL
(while holding SHIFT). You can go back to the previous
step.
Initial Daily Timer settings when shipped from the factory:
DAILY 1: ON Time (8:00)/OFF Time (10:00)/Source
(TUNER FM 1)/Volume level (1)
DAILY 2: ON Time (6:00)/OFF Time (8:00)/Source
(TUNER FM 1)/Volume level (1)
DAILY 3: ON Time (12:00)/OFF Time (14:00)/Source
(TUNER FM 1)/Volume level (1)
EN_UX-G950V[B]5.indb 36EN_UX-G950V[B]5.indb 36 08.4.18 5:32:39 PM08.4.18 5:32:39 PM
37
2 Set the timer as you like.
Repeat the procedure for the following settings until
finished.
1 Set the hour then the minute for on-time.
2 Set the hour then the minute for off-time.
3 Select the playback source—“TUNER-FM,”
“TUNER-AM,” “DISC,” “AUDIO IN,” “TV
SOUND,” or “USB.”
4 For “TUNER-FM” or “TUNER-AM”: Select a preset
channel.
For “DISC”: Select the title/group number, then the
chapter/track/file number*.
For “USB”: Select the group number, then the track/
file number*.
5 Select the volume level.
You can adjust the volume level (“0” to “40” and
“VOL – –”). If you select “VOL – –,” the volume
is set to the same level as when the System was last
turned off.
Once settings are completed, the timer setting
information appears in sequence.
3 Turn off the System (on standby), if you have set the
timer with the System turned on.
* You cannot select the 151st and over.
To turn on or off the Daily Timer
Since Daily Timer is activated at the same time everyday,
you may need to cancel it on some particular days.
To cancel the Daily Timer
1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3)
you want to cancel.
2 Turn off the selected Timer.
To turn on the Daily Timer
1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3)
you want to activate.
2 Activate the selected Timer.
3 Wait until the indication disappears.
Ex.: To cancel Daily Timer 1
Ex.: When Daily Timer 1 (DAILY 1) is
activated
(while holding...)
ON (Time)
Canceled Clock setting
(See page 18.)
Daily Timer 1 Daily Timer 2
Daily Timer 3
ON (Time) ON (Time)
ON (Time)
Canceled Clock setting
(See page 18.)
Daily Timer 1 Daily Timer 2
Daily Timer 3
ON (Time) ON (Time)
EN_UX-G950V[B]5.indb 37EN_UX-G950V[B]5.indb 37 08.4.18 5:32:40 PM08.4.18 5:32:40 PM
38
Setup Menu Operations
INFO
Remote control
Initial Settings
Remote
ONLY
You can change the settings of the System.
The Setup Menu can be used only when “DVD/CD” or
“USB MEM’ is selected as the source.
1 Press SET UP while playback is stopped.
2 Press 3 (or 2) to select the menu.
3 Press (or 5) to move to select the item.
4 Press ENTER/SET.
5 Press (or 5) to select the options, then press
ENTER/SET.
To remove a preference display
Press SET UP.
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
LANGUAGE
Menu Item Contents
LANGUAGE
MENU LANGUAGE
You can select the initial menu language for DivX files/DVD Video. (See page 45.)
AUDIO LANGUAGE
You can select the initial audio language for DivX files/DVD Video. (See page 45.)
SUBTITLE
You can select the initial subtitle language for DivX files/DVD Video. (See page
45.)
ON SCREEN LANGUAGE You can select “ENGLISH,” “FRENCH,” “GERMAN,” “CZECH,” “SLOVAK,”
POLISH” or “HUNGARIAN” as the on-screen language.
PICTURE
MONITOR TYPE
16:9 4:3 LB
4:3 PS
You can select the monitor type to match your TV when you play back picture
recorded for wide-screen televisions.
16:9 NORMAL (Wide-screen television): Select this when the aspect ratio of your
wide-screen TV is fixed to 16:9.
16:9 AUTO (Wide-screen television): Select this when your TV is an ordinary
wide-screen TV.
4:3 LB (Letter Box conversion): For a conventional (4:3) TV. Displays a wide-
screen picture to fit the width of the TV screen keeping the aspect ratio.
4:3 PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed
in to fill the screen vertically and the left and right sides of the picture are cut off.
PICTURE SOURCE
You can obtain optimal picture quality by selecting the source type of the video
source.
AUTO: Normally, select this option. The System recognizes the picture type (film
or video source) of the current picture according to its information.
FILM: For a film source picture.
VIDEO: For a video source picture.
SCREEN SAVER You can set the screen saver function (ON or OFF). If no operation is done for
about 5 minutes, the TV screen dims.
FILE TYPE
You can select the file type to play.
AUDIO: To play MP3/WMA/WAV files.
STILL PICTURE: To play JPEG files.
VIDEO: To play MPEG-1/MPEG-2/DivX files.
EN_UX-G950V[B]5.indb 38EN_UX-G950V[B]5.indb 38 08.4.18 5:32:42 PM08.4.18 5:32:42 PM
39
Menu Item Contents
AUDIO
DIGITAL AUDIO OUTPUT
Set this item correctly when using the OPTICAL DIGITAL OUT terminal on the
rear.
PCM ONLY: When connecting to audio equipment which is compatible with only
linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an
amplifier with a built-in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-
in DTS decoder.
DOWN MIX This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is
set to “PCM ONLY.”
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, etc.
D. RANGE COMPRESSION
You can enjoy powerful audio even at a low volume level while playing Dolby
Digital software.
AUTO: Select to apply the effect to multi-channel encoded software.
ON: Select to always use this function.
OTHERS
RESUME
You can select Resume.
ON: The System resumes playback from the position where playback has been
stopped.
OFF: Resume is deactivated.
ON SCREEN GUIDE Activate (ON) or deactivate (OFF) the on-screen guide (see page 10).
DivX REGISTRATION
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded,
the System’s Registration Code is overwritten for copyright protection.
EN_UX-G950V[B]5.indb 39EN_UX-G950V[B]5.indb 39 08.4.18 5:32:44 PM08.4.18 5:32:44 PM
40
Additional Information
Learning More about This System
Connections (see pages 4 to 6)
Make sure the antenna conductors do not touch any
other terminals, connecting cords or the power cord.
Also, keep the antennas away from metallic parts of the
System, connecting cords, and the power cord. These
could cause poor reception.
Use only speakers with the same speaker impedance
as indicated by the speaker terminals on the rear of the
System.
The speakers are magnetically shielded to avoid color
distortions on TVs. However, if not installed properly,
it may cause color distortions. So, pay attention to the
following when installing the speakers.
When placing the speakers near a TV set, turn off the
TV’s main power switch or unplug it before installing
the speakers.
Then wait at least 30 minutes before turning on the
TV’s main power switch again.
Some TVs may still be affected even though you have
followed the above instructions. If this happens, move
the speakers away from the TV.
Daily Operations—Playback (see pages 8 to 12)
Listening to the Radio:
If you store a new station into an occupied preset
number, the previously stored station in that number will
be erased.
When you unplug the power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
Playing Back a Disc/USB Mass Storage Class Device:
JVC bears no responsibility for any loss of data in the
USB mass storage class device while using this System.
When you change the source to “DVD/CD” or “USB
MEM,” it may take a while to activate the source.
While the System is reading a disc, the source may not
change to “USB MEM” properly. In this case, press 7,
then change the source to “USB MEM.”
On some discs, the actual operations may be different
from what is explained in this manual due to the
programming and disc structure; such differences are not
a malfunction of this System.
The System recognizes up to 999 tracks (files) per group,
and 99 groups per disc/USB mass storage class device.
The total number of tracks (files) that the System can
detect is 4 000.
If there are any unplayable files in a folder, those files
are also counted in the total file number.
Playable files which do not belong to any groups are
handled as GROUP01.
For playback of files in the USB mass storage class
device...
When connecting a USB mass storage class device, refer
also to its manual.
Connect one USB mass storage class device to the
System at a time. Do not use a USB hub.
You cannot charge any USB mass storage class device
through the USB MEMORY REC/PLAY (
)
terminal.
While playing back a file in a USB mass storage class
device, do not disconnect the device. It may cause
malfunction on both the System and the device.
This System is compatible with USB 2.0 Full Speed.
You cannot play back a file larger than 2 Gigabytes.
When playing a file of a large transfer rate, frames or
sounds may be dropped during playback.
This System cannot recognize a USB mass storage
class device whose rating is other than 5 V and exceeds
500 mA.
This System may not play back some USB mass storage
class devices and does not support DRM (Digital Rights
Management).
It will take some time to start up a digital audio player
whose contents are larger than 1 Gigabyte.
For DVD-VR playback...
This System can play only a disc of UDF-Bridge format.
For details about DVD-VR format and Play List, refer
to the manual of the recording equipment.
For MP3/WMA/WAV playback...
MP3/WMA/WAV discs require a longer readout time
than regular CDs. (It depends on the complexity of the
group/file configuration.)
Some MP3/WMA/WAV files cannot be played back
and will be skipped. This results from their recording
processes and conditions.
This System can play only a disc of ISO 9660 Level 1 or
Level 2.
This System can play back MP3/WMA/WAV files
with the extension code <.mp3>, <.wma>, or <.wav>
(regardless of the letter case—upper/lower).
It is recommended that you make each MP3/WMA/
WAV files as following conditions:
For MP3/WMA files: At a sample rate of 44.1 kHz
and at a data transfer rate of 128 kbps. This System
cannot play back files made at a bit rate of less than
64 kbps.
For WAV files: At a sample rate of 44.1 kHz and at a
quantization rate of 16 bit Linear PCM.
EN_UX-G950V[B]5.indb 40EN_UX-G950V[B]5.indb 40 08.4.18 5:32:45 PM08.4.18 5:32:45 PM
41
For JPEG files playback...
It is recommended that you record a file at 640 x 480
resolution. (If a file has been recorded at a resolution
of more than 640 x 480, it will take a long time to be
shown.)
This System can play back JPEG files with the extension
code <.jpg> or <.jpeg> (regardless of the letter case—
upper/lower).
This System may not play back JPEG files properly if
they are recorded from a device other than a digital
camera.
For MPEG-1/MPEG-2 playback...
This System can play back MPEG-1/MPEG-2 files with
the extension code <.mpg>, <.mpeg>, or <.mod>*.
* <.mod> is an extension code used for the MPEG-2 files
recorded by JVC Everio camcorders. The MPEG-2 files
with the <.mod> extension code cannot be played back
if HD format is used or its maximum bit rate is more
than 2 Mbps.
The stream format should conform to MPEG system/
program stream.
720 x 576 pixels (25 fps) / 720 x 480 pixels (30 fps) is
recommended for the highest resolution.
This System also supports the resolutions of 352 x 576 /
480 x 576 / 352 x 288 pixels (25 fps) and 352 x 480 /
480 x 480 / 352 x 240 pixels (30 fps).
The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple profile at Main Level)/
MP@LL (Main Profile at Low Level).
Audio streams should conform to MPEG1 Audio
Layer-2 or MPEG2 Audio Layer-2.
For DivX playback...
This System can play only a disc of UDF-Bridge format.
“Multi-border” is not supported.
The System supports all versions of DivX
®
video
(including DivX
®
6).
The System supports DivX files whose resolution is
720 x 480 pixels or less (30 fps), and 720 x 576 pixels or
less (25 fps).
Audio stream should conform to Dolby Digital,
MPEG1 Audio Layer-2 or MPEG Audio Layer-3
(MP3).
This System can play back DivX files with the extension
code <.divx> <.div> <.avi> (regardless of the letter
case—upper/lower).
The System does not support GMC (Global Motion
Compression).
The file encoded in the interlaced scanning mode may
not be played back correctly.
Daily Operations—Sound & Other Adjustments
(see pages 13 to 18)
Adjusting the Sound:
This function also affects the sound through the
headphones.
Creating a Soothing Tone for Your Ear —MY SOUND
MY SOUND setup is prohibited for certain file format.
Changing the Scanning Mode:
You cannot change the scanning mode to progressive in
the following cases:
When your TV does not support the progressive video
input.
When you have not connected your TV to the system
using a component video cord.
Setting the Clock:
“0:00” will flash on the display until you set the clock.
The clock may gain or lose 1 to 2 minutes per month. If
this happens, reset the clock.
Advanced Radio Operations (see pages 19 and
20)
If you want to know more about Radio Data System, visit
«http://www.rds.org.uk».
If the System takes time to display the Radio Data System
information—PS, PTY, RT signals, “WAIT PS,” “WAIT
PTY,” or “WAIT RT” will appear while searching.
Unique Video Disc/File Operations (see pages 21
to 23)
Selecting the Audio Track:
On some discs/files, you cannot change audio language
during playback.
Special Effect Playback:
During slow-motion playback, no sound will be emitted.
While zoomed in, the picture may look coarse.
Advanced Playback Operations (see pages 24 to
26)
Programming the Playing Order—Program Play:
While programming steps...
Your entry will be ignored if you have tried to program
an item number that does not exist (for example,
selecting track 14 on a disc that only has 12 tracks).
EN_UX-G950V[B]5.indb 41EN_UX-G950V[B]5.indb 41 08.4.18 5:32:46 PM08.4.18 5:32:46 PM
42
Recording and Editing Operations (see pages 27
to 30)
Giving (Editing) Titles to Tracks or Groups:
When a track is recorded, the track title is given to the
track automatically. When you give a title to the track,
delete that title first, then enter your desired title.
On-Screen Operations (see pages 31 to 35)
On-screen Bar Operations:
A-B Repeat is available only within the same title/
program/track.
Daily Timer Operations (see pages 36 and 37)
Setting the Daily Timer:
If you do not specify the preset station or track number
correctly while setting a timer, the currently selected
station or the first track will be played when the timer is
activated.
When you unplug the power cord or if a power failure
occurs, the timer will be canceled. You need to set the
clock first, then the timer again.
If you set DVD Video as the source, Daily Timer will not
work correctly.
If you set the Sleep Timer after Daily Timer starts playing
the selected source, Daily Timer is canceled.
Setup Menu Operations (see pages 38 and 39)
General:
If the upper and lower parts of the menu are cut off,
adjust the picture size control of the TV.
LANGUAGE menu:
When the language you have selected for “MENU
LANGUAGE,” “AUDIO LANGUAGE,” or “SUBTITLE”
is not recorded, the original language is used as the initial
language.
PICTURE menu—MONITOR TYPE:
Even if “4:3 PS” is selected, the screen size may become
4:3 letter box while playing a disc/file. This depends on
how the discs are recorded.
When you select “16:9” for a picture whose aspect ratio
is 4:3, the picture changes slightly due to the process of
converting the picture width.
OTHERS menu—ON SCREEN GUIDE:
The setup menu and on-screen bar will be displayed (and
recorded) even if this function is set to “OFF.”
Subtitles and the information for zoom-in always appear
on the display regardless of this setting.
Maintenance
To get the best performance of the System, keep your discs
and mechanism clean.
Handling Discs
Remove the disc from its case by holding it at the edge
while pressing the center hole lightly.
Do not touch the shiny surface of the disc, or bend the
disc.
Put the disc back in its case after use to prevent warping.
Be careful not to scratch the surface of the disc when
placing it back in its case.
Avoid exposure to direct sunlight, extreme temperature,
and moisture.
To clean the disc:
Wipe the disc with a soft cloth in a straight line from center
to edge.
Cleaning the System
Stains should be wiped off with a soft cloth. If the System
is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean
with a dry cloth.
Since the System may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
following:
DO NOT wipe it with a hard cloth.
DO NOT wipe it forcefully.
DO NOT wipe it with thinner or benzine.
DO NOT apply any volatile substance such as
insecticides to it.
DO NOT allow any rubber or plastic to remain in
contact for a long time.
To remove the speaker grilles
Holes Projection
Speaker grille
EN_UX-G950V[B]5.indb 42EN_UX-G950V[B]5.indb 42 08.4.18 5:32:48 PM08.4.18 5:32:48 PM
43
Troubleshooting
General
Adjustments or settings are suddenly canceled before you
finish.
] There is a time limit. Repeat procedure again.
Operations are disabled.
] The built-in microprocessor may malfunction due to
external electrical interference. Unplug the power cord
and then plug it back in.
Unable to operate the System from the remote control.
] The path between the remote control and the remote
sensor on the System is blocked.
] The batteries are exhausted.
No sound is heard.
] Speaker connections are incorrect or loose.
] Headphones are connected.
No picture appears on the TV screen.
] The video cord connections are incorrect or loose.
No picture is displayed on the TV screen, the picture is
blurred, or the picture is divided into two parts.
] The System is connected to a TV which does not
support progressive video input.
] Incorrect scanning mode is selected (see page 16).
] When you unplug the power cord and plug it back
again, the scanning mode may change back to the initial
setting (“RGB”) (see page 16).
The left and right edges of the picture are missing on the
screen.
] Select “4:3 LB” for “MONITOR TYPE” (see page 38).
Radio Operations
Hard to hear broadcasts because of noise.
] Antenna connections are incorrect or loose.
] The AM loop antenna is too close to the System.
] The FM antenna is not properly extended and
positioned.
Disc/USB mass storage class device Playback
Operations
The disc does not play.
] You have inserted a disc whose Region Code is not “2.”
(“RG ERROR” appears on the display.)
] The disc is placed upside down. Place the disc with the
label side facing up.
ID3 Tag on an MP3 file cannot be shown.
] There are two types of ID3 Tag—Version 1 and Version
2. This System can only show ID3 Tag Version 1.
Groups and tracks are not played back as you expect.
] The playing order is determined when the groups
and tracks were recorded. It depends on the writing
application.
MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2 or DivX
files are not played back.
] The disc or the USB mass storage class device may
contain different types of files (ex. MP3/WMA/WAV/
JPEG). In this case, you can only play back the files
selected by pressing FILE TYPE (while holding SHIFT)
(see page 38).
] You have changed the “FILE TYPE” setting after the
System read the disc or the USB mass storage class
device. In this case, reload the disc or disconnect the
USB mass storage class device and connect it again.
The disc sound is discontinuous.
] The disc is scratched or dirty.
No subtitle appears on the display though you have
selected the initial subtitle language.
] Some DVDs/DivX files are programmed not to display
any subtitle initially. If this happens, press SUBTITLE
(while holding SHIFT) after starting playback (see page
22).
Audio language is different from the one you have
selected as the initial audio language.
] Some DVDs/DivX files are programmed to always use
the original language initially. If this happens, press
AUDIO/MPX (while holding SHIFT) after starting
playback (see page 21).
The disc tray does not open or close.
] The power cord is not plugged in.
] Child Lock is in use. “LOCKED” appears on the display
(see page 26).
EN_UX-G950V[B]5.indb 43EN_UX-G950V[B]5.indb 43 08.4.18 5:32:49 PM08.4.18 5:32:49 PM
44
Recording and Editing Operations
Unable to record into the USB device.
] The capacity of the USB device is full. Erase some tracks.
] There have been 999 tracks or group on the USB device
you want to record into. Erase unwanted tracks.
] The USB device is write-protected.
] The connected USB device is incompatible to this
System.
Unable to assign title to tracks on the USB device.
] When a track is damaged, you cannot edit that track. In
this case, turn off the System and turn on again.
] The USB device is write-protected.
Timer Operations
Daily Timer does not work.
] The System has been turned on when the on-time came.
Timer starts working only when the System is turned
off.
Daily Timer does not start playback.
] The loaded disc is a DVD Video. Change the disc.
Display Messages for Recording or Editing
Operations
NODEVICE
No USB device is connected or the connected USB device
is not compatible with this System.
PROHIBIT
The USB device is prohibited from editing file/group.
D. (data) FULL
The capacity of memory for USB device is full.
FILEFULL
The USB device exceeds the maximum number of files it
can store.
W. PROT (write-protect)
The USB device is write-protected.
SCMS VLT (Serial Copy Management System violation)
You have tried to copy from a duplicated disc to the USB
device.
DUPLI. (duplicate)
The same title has been recorded.
NO NAME
No name is entered (blank) when editing the file/group
name.
D. (device) FAIL
The unit has failed to read the USB device.
How to attach the core filter
Attach the provided core filter to the USB cable to reduce interference.
1 Release the stopper of the core filter.
2 Run the USB cable through the core filter, leaving approx. 2 cm between the unit-side end of the USB cable and the
core filter.
Firmly wind the USB cable once inside the cutout of the core filter.
3 Close the core filter until you hear a clicking sound.
Do not damage the USB cable by applying excessive power when winding.
12 3
Stopper
2 cm
USB cable
To the System
EN_UX-G950V[B]5.indb 44EN_UX-G950V[B]5.indb 44 08.4.18 5:32:50 PM08.4.18 5:32:50 PM
45
Language Code List
AA
Afar
GD
Scots Gaelic
MI
Maori
SN
Shona
AB
Abkhazian
GL
Galician
MK
Macedonian
SO
Somali
AF
Afrikaans
GN
Guarani
ML
Malayalam
SQ
Albanian
AM
Ameharic
GU
Gujarati
MN
Mongolian
SR
Serbian
AR
Arabic
HA
Hausa
MO
Moldavian
SS
Siswati
AS
Assamese
HI
Hindi
MR
Marathi
ST
Sesotho
AY
Aymara
HR
Croatian
MS
Malay (MAY)
SU
Sundanese
AZ
Azerbaijani
HY
Armenian
MT
Maltese
SV
Swedish
BA
Bashkir
IA
Interlingua
MY
Burmese
SW
Swahili
BE
Byelorussian
IE
Interlingue
NA
Nauru
TA
Tamil
BG
Bulgarian
IK
Inupiak
NE
Nepali
TE
Telugu
BH
Bihari
IN
Indonesian
NL
Dutch
TG
Tajik
BI
Bislama
IS
Icelandic
NO
Norwegian
TH
Thai
BN
Bengali, Bangla
IW
Hebrew
OC
Occitan
TI
Tigrinya
BO
Tibetan
JI
Yiddish
OM
(Afan) Oromo
TK
Turkmen
BR
Breton
JW
Javanese
OR
Oriya
TL
Tagalog
CA
Catalan
KA
Georgian
PA
Panjabi
TN
Setswana
CO
Corsican
KK
Kazakh
PS
Pashto, Pushto
TO
Tonga
CY
Welsh
KL
Greenlandic
PT
Portuguese
TR
Turkish
DA
Danish
KM
Cambodian
QU
Quechua
TS
Tsonga
DZ
Bhutani
KN
Kannada
RM
Rhaeto-Romance
TT
Tatar
EL
Greek
KO
Korean (KOR)
RN
Kirundi
TW
Twi
EO
Esperanto
KS
Kashmiri
RO
Rumanian
UK
Ukrainian
ET
Estonian
KU
Kurdish
RW
Kinyarwanda
UR
Urdu
EU
Basque
KY
Kirghiz
SA
Sanskrit
UZ
Uzbek
FA
Persian
LA
Latin
SD
Sindhi
VI
Vietnamese
FI
Finnish
LN
Lingala
SG
Sangho
VO
Volapuk
FJ
Fiji
LO
Laothian
SH
Serbo-Croatian
WO
Wolof
FO
Faroese
LT
Lithuanian
SI
Singhalese
XH
Xhosa
FY
Frisian
LV
Latvian, Lettish
SL
Slovenian
YO
Yoruba
GA
Irish
MG
Malagasy
SM
Samoan
ZU
Zulu
EN_UX-G950V[B]5.indb 45EN_UX-G950V[B]5.indb 45 08.4.18 5:32:52 PM08.4.18 5:32:52 PM
46
Optical Digital Out Signals
DIGITAL AUDIO OUTPUT Output Signals
Playback disc/file
STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY
DVD Video
with 48 kHz, 16/20/24 bit Linear PCM
48 kHz, 16 bit Linear PCM*
with 96 kHz, Linear PCM 48 kHz, 16 bit Linear PCM
with Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bit
Linear PCM
with DTS DTS bitstream 48 kHz, 16 bit Linear PCM
DVD-R/-RW
in DVD-VR
format
with 48 kHz, 16/20/24 bit Linear PCM
48 kHz, 16 bit Linear PCM*
with Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bit
Linear PCM
SVCD/VCD/CD
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
CD with DTS
DTS bitstream 44.1 kHz, 16 bit Linear PCM
MP3/WMA/WAV/MPEG-1/MPEG-2
32/44.1/48 kHz, 16 bit Linear PCM
DivX
with MP2, MP3 32/44.1/48 kHz, 16 bit Linear PCM
with Dolby Digital
Dolby Digital bitstream
32/44.1/48 kHz,
16 bit Linear PCM
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the
OPTICAL DIGITAL OUT terminal if the discs are not copy-protected.
Operating JVC’s TVs Using the Remote Control
You can use the remote control to operate JVC’s TVs.
TV/VIDEO
Change the input mode.
TV CH UP, DOWN
Change the channel.
While holding SHIFT, press...
TV
Turn on/off TV.
TV VOL +, –
Adjust the TV volume.
Remote control
EN_UX-G950V[B]5.indb 46EN_UX-G950V[B]5.indb 46 08.4.18 5:32:53 PM08.4.18 5:32:53 PM
47
General
Power requirements: AC 230 V , 50 Hz
Power consumption: 155 W (at operation)
18 W (at standby)
1 W or less (at ECO mode)
Dimensions (approx.): 166 mm × 252 mm × 304 mm
(W/H/D)
Mass (approx.): 5.4 kg
Speakers—SP-UXG950V
Speaker units: Tweeter: 4 cm cone x 1
Woofer: 12 cm cone x 1
Impedance: 6 Ω
Dimensions (approx.): 160 mm × 250 mm × 179 mm
(W/H/D)
Mass (approx.): 2.2 kg each
Supplied Accessories
See page 4.
Design and specifications are subject to change without
notice.
Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic”, and the double-D symbol are trademarks of Dolby
Laboratories.
“DTS” is a registered trademark of DTS, Inc. and
“DTS2.0+Digital Out” is a trademark of DTS, Inc.
“Official DivX® Ultra Certified product” “Plays all versions of
DivX® video (including DivX® 6) with enhanced playback of
DivX® media files and the DivX® Media Format” “DivX, DivX
Ultra Certified, and associated logos are trademarks of DivX,
Inc. and are used under licence.”
Microsoft and Windows Media are either registered trademarks
or trademarks of Microsoft Corporation in the United States
and/or other countries.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS
TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD DEFINITION’
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR
TV SET COMPATIBILITY WITH THIS MODEL 525p AND
625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.”
Specifications
Amplifier section—CA-UXG950V
Output Power: 160 W (80 W + 80 W) at 6 Ω
(10% THD)
Audio Input: AUDIO IN: Stereo min. ( 3.5 mm)
500 mV/47 kΩ (at “IN_LVL1”)
250 mV/47 kΩ (at “IN_LVL2”)
125 mV/47 kΩ (at “IN_LVL3”)
Audio input/output: AV-Scart:
Input: TV Sound only
SUBWOOFER OUT:
500 mV/10 kΩ
Digital output: OPTICAL DIGITAL OUT:
–21 dBm to –15 dBm (660 nm
±30 nm)
Digital input: USB MEMORY REC/PLAY
AV (SCART):
Color system: PAL (interlaced/progressive)
Composite video: 1 V(p-p)/75 Ω
S-VIDEO: Y (luminance) 1 V(p-p)/75 Ω
C (chrominance, burst) 0.3 V(p-p)/75 Ω
RGB: 0.7 V(p-p)/75 Ω
VIDEO OUT (COMPONENT): (Y) 1 V(p-p)/75 Ω
(P
B/PR) 0.7 V(p-p)/75 Ω
Speaker impedance: 6 Ω – 16 Ω
Tuner section
FM tuning range: 87.50 MHz – 108.00 MHz
AM (MW) tuning range: 522 kHz – 1 629 kHz
Disc player section
Playable disc:DVD Video/CD/VCD/SVCD/
CD-R/CD-RW (CD/SVCD/VCD/MP3/
WMA/WAV/JPEG/MPEG-1/MPEG-2/
DivX format)
DVD-R/-RW (DVD-VR/DVD Video/
MP3/WMA/WAV/JPEG/MPEG-1/
MPEG-2/DivX format)
+R/+RW (DVD Video/MP3/WMA/
WAV/JPEG/MPEG-1/MPEG-2/DivX
format)
DVD-ROM (MP3/WMA/WAV format)
Dynamic range: 80 dB
Horizontal resolution: 500 lines
Wow and flutter: Immeasurable
USB section
Playable files: MP3/WMA/WAV/JPEG/MPEG-1/
MPEG-2/DivX format
USB specification: Compatible with USB 2.0 Full Speed
Compatible device: Mass storage class
Compatible system: FAT16, FAT32
Bus power supply: DC 5 V
500 mA
EN_UX-G950V[B]5.indb 47EN_UX-G950V[B]5.indb 47 08.4.18 5:32:54 PM08.4.18 5:32:54 PM
48
Parts Index
Remote control
Main unit
This remote control can also operate
JVC’s TVs (see page 46).
Remote control
Name Page Name Page
AUDIO/TV
o
8, 37, 46 MY SOUND
n
14, 15
7
d
10, 12, 14, 24, 25,
28, 30, 40
Number buttons,
Character entry
buttons
6
9, 11, 12, 29, 30, 33, 34
1, ¡
4
11, 33 ON SCREEN
x
32
4, ¢
s
9, 11, 12, 24, 25,
28, 30
PTY 9
8
19
5, , 2, 3,
ENTER/SET
q
9, 11, 14 – 18, 22,
23, 25, 28 – 30,
32 – 35, 37, 38
PTY (
z
19
(One Touch
Replay)
f
23 PTY SEARCH
p
19
m
13 REPEAT
y
26
3D P/HPS
m
15 RETURN
9
12
AHB PRO
b
13 S.TURBO II
b
13
AUDIO IN/TV
;
8, 10, 12 SCAN MODE
d
16
AUDIO/MPX
c
21 SET UP
w
38
AUDIO/
TV VOL +, –
v
8, 13, 14, 46 SHIFT
u
10 – 13, 15 – 18,
21 – 23, 25, 28 – 30,
36, 37, 46
BASS/TREBLE
c
14 SLEEP/A.STBY
i
18
C.VOICE
,
15
SLOW 9, (
4
23
CANCEL
l
18, 25, 30, 36, 37 SUBTITLE
x
22
CLOCK/TIMER
,
18, 36, 37 TA/News/Info
/
20
DIMMER
1
16 TITLE/DEL
j
29, 30
DISP/CHARA
h
8, 18, 19, 29 TOP MENU/PG
9
11, 34, 35
DVD/
AUDIO IN LEVEL
i
12, 16 TUNER
a
8, 9
DVD/CD 6
3
8, 10 – 12,
23 – 25, 28, 35
TUNER/PLAY
MODE
t
9, 24, 25
ECO
1
16 TV CH UP,
DOWN
r
46
FADE MUTING
e
13 TV/VIDEO
g
46
FILE TYPE
w
10
USB 6
2
8, 10, 11, 23, 28, 30, 35
GROUP/
TITLE SKIP
s
11, 28, 30 VFP
k
17
MARK
5
30 ZOOM
7
23
MENU/PL
l
11, 34, 35
Main unit
Name Page Name Page
3
8, 46
DVD/CD #/8
5
8, 10, 23,
28, 35
7
8
10, 12, 26,
28, 40
ECO
4
16
0
#
10, 26 PHONES jack
9
4, 8
AUDIO IN jack
^
4, 6, 12 Remote sensor
-
6
AUDIO IN,
TV SOUND
$
8, 10, 12 SOUND TURBO II
7
13
CD 3 USB REC
0
28 STANDBY lamp
2
8
DEMO
7
1 TUNER FM, AM
@
8, 9
Disc tray
=
10, 26
USB MEMORY #/8
!
8, 10, 23,
35
Display
1
7 USB MEMORY REC/PLAY
(
)
&
4, 6
DOWN 4,
UP ¢
6, %
9, 11, 12, 25, 28 VOLUME +, –
~
8, 13
EN_UX-G950V[B]5.indb 48EN_UX-G950V[B]5.indb 48 08.4.18 5:32:56 PM08.4.18 5:32:56 PM
SAFETY INSTRUCTIONS
“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”
This equipment has been designed and manufactured to meet international safety standards but, like any electrical
equipment, care must be taken if you are to obtain the best results and safety is to be assured.
Do read the operating instructions before you attempt to use the equipment.
Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between
pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and
withdraw the mains plug when making or changing connections.
Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
Do be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any
way — switch off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for
unattended operation or has a standby mode.
Switch off using the switch on the equipment and make sure that your family know how to do this.
Special arrangements may need to be made for infirm or handicapped people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic
safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume as such use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the
manufacturers approved stand or legs with the fixings provided according to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case.
— this could result in a fatal electrical shock.
NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!
UX-G950V
0408WMKMDWJMM© 2008 Victor Company of Japan, Limited
EN
MICRO COMPONENT SYSTEM
Rear_UX-G950V[B].indd 1Rear_UX-G950V[B].indd 1 08.4.21 2:01:56 PM08.4.21 2:01:56 PM
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC SP-UXG950 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC SP-UXG950 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van JVC SP-UXG950

JVC SP-UXG950 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano - 201 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info