Handleiding JVC SP-UXG68 (pagina 45 van 48) (Engels)

56661

Verklein

Vergroot

Pagina terug

1/48

Pagina verder

MICRO COMPONENT SYSTEM

UX-G68—Consists of CA-UXG68 and SP-UXG68

INSTRUCTIONS

SUPER VIDEO

GVT0203-006A

[US,UN,UG,UX,A,UW]

Cover[U].fm Page 1 Friday, December 15, 2006 6:28 PM

G-1

Warnings, Cautions and Others

CAUTION— (Standby/on) button!

Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus,

ensure that the plug is easily accessible. The (Standby/on)

button in any position does not disconnect the mains line.

• When the System is on standby, the STANDBY lamp lights red.

• When the System is turned on, the STANDBY lamp goes off.

The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

CAUTION:

Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service

personnel.

CAUTION:

Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.

CAUTION

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted candles, on the apparatus.

• When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these

batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall

be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1. Front: No obstructions and open spacing.

2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.

3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm

or more.

15 cm

10 cm

15 cm

1 cm

15 cm

1 cm

Front view Side view

SP-UXG68

CA-UXG68

[European Union only]

Safty[U].fm Page 1 Tuesday, December 5, 2006 2:45 PM

Precautions

Installation

• Install the System in a location with adequate ventilation to

prevent internal heat build-up in the System.

• Install in a place which is level, dry and neither too hot nor

too cold—between 5°C and 35°C.

• Leave sufficient distance between the System and the TV.

• Keep the speakers away from the TV to avoid interference

with the TV.

Power sources

• When unplugging the System from the wall outlet, always

pull on the plug, not the AC power cord.

Moisture condensation

Moisture may condense on the lenses inside the System in

the following cases:

• After starting to heat the room

• In a damp room

• If the System is brought directly from a cold to a warm

place.

Should this occur, the System may malfunction. In this case,

leave the System turned on for a few hours until the moisture

evaporates, unplug the AC power cord, then plug it in again.

Internal heat

• Make sure there is good ventilation around the unit. Poor

ventilation could overheat and damage the unit.

Others

• Should any metallic object or liquid fall into the System,

unplug the AC power cord and consult your dealer before

operating any further.

• If you are not going to operate the System for an extended

period of time, unplug the AC power cord from the wall

outlet.

If anything goes wrong, unplug the AC power cord and

consult your dealer.

Contents

Introduction .............................................................1

Playable Disc/File Types .................................................... 2

How to Read This Manual .................................................. 2

Connections ..............................................................3

Display Indicators.................................................... 6

Daily Operations—Playback ..................................7

Daily Operations—Sound & Other Adjustments

.....12

Adjusting the Volume ....................................................... 12

Adjusting the Sound.......................................................... 12

Creating 3-dimensional Sound Field—3D Phonic............ 13

Using Headphone Surround .............................................. 13

Presetting Automatic DVD Video Sound Increase Level........ 13

Changing the Display Brightness...................................... 13

Adjusting the Audio Input Level ...................................... 14

C h a n g i n g t h e S c a n n i n g M o d e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4

Changing the Picture Tone................................................ 14

Setting the Clock............................................................... 15

Turning Off the Power Automatically .............................. 15

Unique DVD/VCD Operations .............................16

Selecting the Audio Track................................................. 16

Selecting the Subtitle Language........................................ 17

Selecting the View Angle ................................................. 17

Selecting the Browsable Still Pictures .............................. 17

Playing Back Bonus Group............................................... 17

Making Dialogues Clear—Clear Voice ............................ 18

Special Effect Playback .................................................... 18

Advanced Playback Operations ...........................19

Programming the Playing Order—Program Play ............. 19

Playing at Random—Random Play .................................. 20

Playing Repeatedly ........................................................... 21

Prohibiting Disc Ejection—Child Lock............................ 21

On-screen Bar Operations ................................................. 22

Audio/Video File Operations ................................26

Advanced Tape Operations ..................................28

Recording on a Tape ......................................................... 28

Synchronized Recording ................................................... 29

Enjoying Karaoke..................................................30

Singing Along (Karaoke) .................................................. 30

Microphone Mixing .......................................................... 31

Reserving Karaoke Songs—Karaoke Program Play......... 32

Timer Operations .................................................. 33

Setup Menu Operations ........................................35

Additional Information ......................................... 37

Learning More about This System.................................... 37

Troubleshooting ................................................................ 41

Operating JVC’s TVs Using the Remote Control............. 43

Specifications .................................................................... 44

Parts Index ............................................................45

DO NOT install the System in a location near

heat sources, or in a place subject to direct

sunlight, excessive dust or vibration.

DO NOT handle the AC power cord with wet

hands.

DO NOT block the ventilation openings or

holes. If they are blocked by a newspaper or

cloth, etc., the heat may not be able to get out.

DO NOT disassemble the System since there

are no user serviceable parts inside.

Introduction

UX-G68[U].book Page 1 Tuesday, December 5, 2006 4:03 PM

Playable Disc/File Types

In addition to the above discs/files, this System can playback

audio data recorded on CD-Extra.

• The following discs cannot be played back:

DVD-RAM, CD-I (CD-I Ready), CD-ROM, Photo CD,

CD-G (CD-Graphics) and DVD/CD Text.

Playing back these discs will generate noise and damage

the speakers.

• In this manual, “file” and “track” are interchangeably used

for MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/ASF/

DivX operations.

• It is possible to playback finalized +R/+RW (DVD format

only) discs. “DVD” lights on the front display panel when

a +R/+RW disc is loaded.

About color system

This System accommodates the NTSC and PAL system and

can playback discs recorded in either the NTSC or the PAL

system.

• To change the color system, see page 14.

Note on Region Code

DVD players and DVDs have their own Region Code

numbers. This System can playback only DVDs with an

appropriate Region Code number.

• For details, see “Specifications” on page 44.

(For Central and South American countries and Australia)

Audio formats

The System can playback the following digital audio

formats.

•

LPCM

(Linear PCM), DIGITAL (Dolby Digital),

DTS (Digital Theater Systems),

MLP

(Meridian Lossless

Packing)

When playing a multi-channel encoded DVDs, the System

properly converts these multi-channel signals into 2

channels, and emits the downmixed sound from the

speakers.

•

To enjoy the powerful sound of these multi-channel

encoded DVDs,

connect a proper decoder or an amplifier

with a proper built-in decoder to the OPTICAL DIGITAL

OUT terminal on the rear.

How to Read This Manual

• Button and control operations are explained in the table

below.

•

Some related tips and notes are explained later in the

sections “Learning More about This System” and

“Troubleshooting,” but not in the same section

explaining the operations ( indicates that the

content has some information).

“DVD Logo” is a trademark of DVD Format/Logo

Licensing Corporation registered in the US, Japan and other

countries.

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with

the “Compact Disc Digital Audio” standard. Therefore, the

use of the Non-DVD side of a DualDisc in this product is not

recommended.

• CD-R/-RW: Recorded in the Audio CD, Video CD, and

SVCD formats. MP3, WMA, WAV, JPEG, MPEG-1,

MPEG-2, ASF, and DivX files written in accordance

with the “ISO 9660” format can also be played.

• DVD-R/-RW, +R/+RW: Recorded in the DVD Video

format. MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2,

ASF and DivX files written in the UDF-Bridge format

can also be played.

• DVD-R/-RW: Recorded in the DVD Video Recording

(VR) format.

• DVD-ROM: Recorded in the MP3, WMA, WAV, JPEG,

MPEG-1, MPEG-2, ASF, and DivX format.

• USB mass storage class device: MP3, WMA, WAV,

JPEG, MPEG-1, MPEG-2, ASF and DivX files.

EX.:

DIGITAL VIDEO

SUPER VIDEO

COMPACT

DIGITAL AUDIO

IMPORTANT: Before playing a disc, make sure of

the following...

• Turn on the TV and select an appropriate input mode on

the TV to view the pictures or on-screen displays.

• For disc playback, you can change the initial setting to

your preference. See “Setup Menu Operations” on

page 35.

If “ ” appears on the TV screen when you press a

button, the disc cannot perform the operation you have

tried to do.

Indicates that you press the button

briefly

Indicates that you press the button

briefly and

repeatedly

until an option you want is

selected.

Indicates that you press one of the buttons.

Indicates that you

press and hold

the button

for a specified period.

Indicates that you turn the control toward the

specified direction(s).

Indicates that this operation is only possible

using the remote control.

Indicates that this operation is only possible

using the main unit.

INFO

sec.

Remote

ONLY

Main Unit

ONLY

UX-G68[U].book Page 2 Tuesday, December 5, 2006 4:03 PM

Connections

• Connect VIDEO OUT directly to the video input of your

TV. Connecting VIDEO OUT to a TV via a VCR may

interfere with your viewing when playing back a copy-

protected disc. Connecting VIDEO OUT to an integrated

TV/VCR system may also interfere with your viewing.

Do not connect the AC power cord until all other

connections have been made.

Supplied accessories

Check to be sure that you have all the following items.

• FM antenna (x1)

• AM loop antenna (x1)

• Composite video cord (x1)

• Remote control (x1)

• Batteries (x2)

• AC plug adapter (x1) (except for the Middle East and

Australia)

If any item is missing, consult your dealer immediately.

Front panel

Pull down the cover until you hear a clicking sound.

From the portable audio device

See page 5.

From the headphones

See page 7.

110V

127V

220V

230V

-240V

VOLTAGE

SELECTOR

From the input of TV/monitor

See page 5.

@ From the digital input of digital

audio component

See page 5.

¤ To a wall outlet

Plug in the AC power cord only after

all connections are completed.

• If the wall outlet does not match the

AC plug, use the supplied AC plug

adapter (except for the Middle East

and Australia

! From the powered subwoofer

See page 4.

Ÿ From the speakers

See page 4.

~ From AM/FM antenna

See page 4.

From the USB mass storage class device

See page 5.

Voltage selector (except for Australia)

See page 5.

Rear panel

UX-G68[U].book Page 3 Tuesday, December 5, 2006 4:03 PM

~ AM/FM antenna

To assemble the AM loop antenna

To connect AM/FM antenna

For better FM reception

• Disconnect the supplied FM antenna, and connect to an

outdoor FM antenna using a 75

Ω

wire with coaxial type

connector (IEC or DIN45325).

Ÿ Speakers

• When connecting the speaker cords, match the polarity of

the speaker terminals: red color to (+) and black color to (–).

! To connect the powered subwoofer

The subwoofer connected can reproduce the bass sounds

recorded in front left and right channels, but cannot

reproduce the LFE signals in DVD multi-channel discs.

• Before plugging the unit to the main supply, make sure that

the powered subwoofer is turned off.

Extend it so that you can obtain the best

reception.

FM antenna (supplied)

AM loop antenna

(supplied)

FM outdoor antenna

(not supplied)

• DO NOT connect more than one speaker to

each terminal.

• DO NOT push or pull the speakers as this

will damage the foot spacers at the bottom

of the speakers.

CAUTION:

From right

speaker

From left

speaker

Red

Black

Press and hold

ReleaseInsert

SUBWOOFER

OUT

From the powered

subwoofer

(not supplied)

UX-G68[U].book Page 4 Tuesday, December 5, 2006 4:03 PM

TV/monitor

Connect the COMPONENT, S-VIDEO, or VIDEO jacks

which you want to use.

• To select progressive scanning mode (see page 14), use

COMPONENT jacks.

• After connecting a TV, select the proper video signal mode

according to the connection method. See “Changing the

Scanning Mode” on page 14.

@ Digital audio component

• Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu

correctly according to the connected digital audio

equipment (see page 36). If

the

setting is incorrect, loud

noise may be generated causing damage to the speakers.

• By using QP Link (Quick Portable Link), you can easily

start playing back a portable audio device on this unit. See

page 11 for details.

• If an external device is not equipped with a stereo mini plug

audio output, use a plug adaptor to convert the stereo mini

plug to the corresponding plug of the audio output.

• You can connect a USB mass storage class device such as a

USB flash memory device, hard disk drive, multimedia card

reader, etc. to this System. See pages 10 and 37 for details.

•

If you press USB MEMORY 3, the System detects the

USB mass storage class device and the control screen

appears on the TV screen

. See page 26 for details.

• You cannot connect a computer to the USB MEMORY

terminal of the System.

Before plugging in the System

(except for Australia)

Set the correct voltage for your area with the voltage selector

on the rear.

Preparing the remote control

• Dispose of batteries in the proper manner, according to

federal, state, and local regulations.

When using the remote control

Point the top of the remote control toward the remote sensor

as directly as possible. If you operate it from a diagonal

position, the operating range (approx. 5 m) may be shorter.

When connecting a portable audio device (AUX)

Green

Blue

Red

Component video cord

(not supplied)

S-Video cord (not supplied)

Composite video cord (supplied)

Protective cap

Stereo mini plug

(not supplied)

At the front

panel

When connecting a USB mass storage class device

DO NOT recharge, short, disassemble, heat

the battery or dispose of it in a fire.

USB cable

(not supplied)

At the front

panel

110V

127V

220V

230V

-240V

VOLTAGE

SELECTOR

Use a screwdriver to set the voltage

selector to the same voltage as

where you are plugging in the unit.

(See also the back cover page.)

R6(SUM-3)/AA(15F)

UX-G68[U].book Page 5 Tuesday, December 5, 2006 4:03 PM

Display Indicators

The indications on the display tell you a lot of things while you are operating the System.

Before operating the System, be familiar with when and how the indicator illuminates on the display.

1 QP Link (Quick Portable Link) indicator

• Lights when QP Link is activated.

2 Disc format indicators

• SVCD: lights when playing back an SVCD.

• VCD: lights when playing back a VCD.

• CD: lights when playing back a CD.

• DVD: lights when playing back a DVD.

3 Audio file format indicators

• MP3: lights when an MP3 track is detected.

• WMA: lights when a WMA track is detected.

4 3D PHONIC indicator

• Lights when 3D Phonic is activated.

• Lights when HP Surround is activated.

5 C.VOICE (Clear Voice) indicator

• Lights when Clear Voice is activated.

6 PG/PL indicators

• PG: lights when a DVD-VR formatted disc is called up.

• PL: lights when a Play List recorded on a DVD-VR

formatted disc is called up.

7 Radio band indicators

• AM: lights when tuning in to an AM station.

• FM: lights when tuning in to an FM station.

8 FM reception indicators

• ST (stereo): lights while an FM stereo station with

sufficient signal strength is tuned in.

• MONO: lights while receiving an FM stereo station in

monaural.

9 S.TURBO (Sound Turbo) indicator

• Lights when Sound Turbo II is activated.

p PRGR. (Progressive) indicator

• Lights when the progressive scanning mode is selected.

q Main display

• While listening to radio: band (or preset number) and

station frequency appear.

• While selecting “AUX”: “AUX” appears.

• While playing a disc or file: current status appears.

• While selecting “TAPE”: “TAPE” appears.

w B.S.P. (Browsable Still Picture) indicator

• Lights when

Browsable

Still Pictures are detected while

playing a DVD Audio disc.

e AHB PRO indicator

• Lights when Active Hyper Bass Pro is activated.

r BONUS indicator

• Lights when

a DVD Audio disc with a bonus group is

detected

t USB indicator

• Lights when “USB MEMORY” is selected as the source.

y Playback mode indicators

• PRGM: lights when Program Play is activated.

• RND: lights when Random Play is activated.

•

(repeat)1

– : lights when One Track/Chapter/Step Repeat is

activated.

– : lights when One Group/Title/All Tracks Repeat is

activated.

u Indicators for Karaoke function

• MIC: lights when the microphone is connected.

• V.MASK (Voice Mask): lights when Voice Mask is

activated.

i A.STBY (Auto Standby) indicator

• Lights when Auto Standby is activated.

• Flashes when disc playback stops with Auto Standby

activated.

REC

indicator

• Lights while recording.

; 23

(tape

direction) indicators

– Lights to indicate the current tape running direction.

– Flashes slowly during playback and recording.

– Flashes quickly while rewinding a tape.

SLEEP

indicator

• Lights when the Sleep Timer is activated.

s Daily Timer indicators

• : lights when Daily Timer is on standby or is being set;

flashes while is working.

• 1/2/3: lights when a Daily Timer (1, 2, or 3) is on standby

or is working; flashes while being set.

• REC: lights when the Recording Timer is on standby or

is working; flashes while being set.

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

12 3

S.TURBO

SLEEP

PRGM

QPLink

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

ewrt yqp9uio;a s

UX-G68[U].book Page 6 Tuesday, December 5, 2006 4:03 PM

Daily Operations—Playback

1 Turn on the power.

The STANDBY lamp on the main unit turns off.

• Without pressing AUDIO, the System turns on

by pressing one of the source buttons.

• The System turns on and activates the AUX source

by starting playback on an external device when QP

Link is activated. (See page 11 for details.)

2 Select the source.

Playback automatically starts if the selected source is

ready.

• If you press AUX, start playback on the external

component.

3 Adjust the volume.

4 Operate the target source as explained

later.

To turn off (standby) the unit

You can reduce power consumption by pressing DIMMER

(while holding SHIFT) to turn the display off while on

standby.

• When the display is turned off, QP Link does not work.

AUDIO VOL

TV VOL

DVD/CD

USB

MEMORY

FM/AM

/AUX

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PROS.TURBO

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

TAPE

GROUP/TITLE SKIP

FM/PLAY MODE

4,x

1,y

SHIFT

,, ,

ENTER/SET

MENU/PL

RETURN

TOP MENU/PG

QP LINK

GROUP/TITLE

Number

buttons

Remote control

In this manual, operations using the remote control are

mainly explained; however, you can use the buttons

and controls on the main unit if they have the same (or

similar) name and marks.

The STANDBY lamp on the main unit

lights in red.

• A small amount of power is always

consumed even while on standby.

For private listening

Connect a pair of headphones to the PHONES jack on the

main unit. The sound will no longer come out of the

speakers. Be sure to turn down the volume before

connecting or putting on the headphones.

• Disconnecting the headphones will activate the

speakers again.

DO NOT turn off (standby) the System with

the volume set to an extremely high level;

otherwise, the sudden blast of sound may

damage your hearing, speakers and/or

headphones when you turn on the System or

start playback.

UX-G68[U].book Page 7 Tuesday, December 5, 2006 4:03 PM

Listening to the Radio

To set the AM tuner interval spacing

Before operating the tuner, it is required to select the

appropriate AM space interval used for your area.

• This is possible only while the System is on standby.

1 Select the AM band.

2 Turn off the power.

3 Select the appropriate AM space interval for your

area.

To select the band (FM or AM)

To tune in to a station

While FM or AM is selected...

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is

tuned in, the frequency stops changing.

• When you repeatedly press the button, the frequency

changes step by step.

To stop searching manually,

press either button.

If the FM station has poor reception

The MONO indicator lights on the display. Reception will

improve though stereo effect is lost—Monaural reception.

To restore the stereo effect,

press the button again (the

MONO indicator disappears).

To preset the stations

You can preset 30 FM and 15 AM stations.

1 Tune in to a station you want to preset.

• You can also store the monaural reception mode for

FM preset stations if selected.

2 Activate the preset number entry mode.

• Finish the following process while the indication on

the display is flashing.

INFO

Main Unit

ONLY

FM AM

FM/AM

/AUX

AUX

DVD/CD

3/8

AM 9KHZ

AM 10KHZ

DISPLAY

(while holding...)

(9 kHz interval)

(10 kHz interval)

Remote control: Main unit:

FM/AM

/AUX

FM/AM

/AUX

GROUP/TITLE SKIP

2 sec.

DOWN

Remote

ONLY

FM/PLAY

MODE

Remote

ONLY

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

12 3

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

ENTER/SET

UX-G68[U].book Page 8 Tuesday, December 5, 2006 4:03 PM

3 Select a preset number for the station you store.

• You can also use the y or 1 button.

4 Store the station.

To tune in to a preset station

Select the band (FM or AM).

2 Select the preset number for the station you stored.

• You can also use the y or 1 button.

Playing Back a Tape

To insert a tape

You can playback type I tapes.

Examples:

To select preset number 5,

press 5.

To select preset number 10,

press 10.

To select preset number 15,

press 10, 1, then 5.

To select preset number 30,

press 10, 3, then 0.

Examples:

To select preset number 5,

press 5.

To select preset number 10,

press 10.

To select preset number 15,

press 10, 1, then 5.

To select preset number 30,

press 10, 3, then 0.

ENTER/SET

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

12 3

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

Remote

ONLY

FM/AM

/AUX

AUX

To start: To stop:

To rewind/fast-forward the tape:

Remote control:

Main unit:

Push Insert Close

With the tape side facing outside

When “TAPE” is not selected as the

current source, press twice.

GROUP/TITLE SKIP

Fast-forward the tape.

Rewind the tape.

DOWN

Rewind the tape.

Fast-forward the tape.

UX-G68[U].book Page 9 Tuesday, December 5, 2006 4:03 PM

Playing Back a Disc/File

Before operating a disc/file, be familiar how a disc/file is

recorded.

• DVD Video comprises of “

Titles

” which includes

“

Chapters

,” DVD Audio/MP3/WMA

/WAV

/MPEG-1/

MPEG-2/ASF

DivX comprises of “

Groups

” which

includes “

Tracks

,” JPEG comprises of “

Groups

” which

includes “

Files

,” and CD/SVCD/VCD comprises of only

“

Tracks

.”

•

For playback of MP3/WMA/WAV/JPEG/MPEG-1/

MPEG-2/ASF/DivX files in a USB mass storage class

device, see also page 26.

To insert a disc

You can insert a disc while playing another source.

• When using an 8 cm disc, place it on the inner circle of the

disc tray.

To close the disc tray,

press 0 again.

• If you press DVD/CD 3, disc tray closes automatically

and playback starts (depending on how the disc is

programmed internally).

To connect a USB mass storage class device

You can connect a USB mass storage class device

(see page 5) while playing another source.

• If you press USB MEMORY 3, the System detects the

USB mass storage class device, the control screen appears

on the TV screen, and playback starts.

• To disconnect the USB mass storage class device safely,

disconnect the device after turning the System off.

To playback a disc/file

•

While playing a disc/file:

This System can store the stop

point, and when you start playback again by pressing

DVD/CD 3 or USB MEMORY 3 (even while on

standby), it starts from the position where you have

stopped—Resume Play. (“RESUME” appears on the

display when you stop playback.)

To stop completely while Resume is activated,

press 7

twice. (To cancel Resume, see “RESUME” on page 36.)

• When operating the System, the on-screen guide icon (see

the following table) appears on the TV.

To select a title/group

While playing a disc/file...

• You can select a title/group directly by pressing a number

button after pressing GROUP/TITLE (except for DVD-VR

disc).

• Group name appears for MP3/WMA/WAV playback.

To select a chapter/track

• For VCD/SVCD, cancel PBC (see next page).

While playing a disc/file...

To locate a particular portion

While playing a disc/file...

• Search speed changes as illustrated above except for MP3/

WMA/WAV/DivX discs/files. For MP3/WMA/WAV/

DivX discs/files, search speed and the indications on the

TV are different.

• No sound comes out if searching is carried out while

showing the moving picture.

To return to normal playback,

press DVD/CD 3 or USB

MEMORY 3 (depending on the source type).

To start: To pause: To stop:

To release, press

DVD/CD 3 or

USB MEMORY 3.

INFO

DVD/CD

USB

MEMORY

DVD/CD USB

On-screen guide icons

• During playback, the following icons may appear on the

TV:

At the beginning of a scene containing

multi-angle views.

At the beginning of a scene containing

multi-audio sounds.

At the beginning of a scene containing

multi-subtitles.

• The following icons will be also shown on the TV to

indicate your current operation.

, , , , ,

• To deactivate the on-screen guide icons, see “ON

SCREEN GUIDE” in “OTHERS” menu on page 36.

• First time you press 4, you

will go back to the beginning of

the current chapter/track.

Remote

ONLY

GROUP/TITLE SKIP

(while holding...)

GROUP/TITLE SKIP

Remote

ONLY

SLOW

–

x2 x5

x10 x20 x60

x2 x5

x10 x20 x60

UX-G68[U].book Page 10 Tuesday, December 5, 2006 4:03 PM

• For DivX, each time you press the > or < button, you can

skip to a scene for 30 seconds or 5 minutes depending on

the DivX file.

To locate an item directly

You can select a title/chapter/track directly and start

playback.

• For DVD Video, you can select

a title before starting

playback

, while you can select

a chapter after starting

playback

To playback using the disc menu

7 For DVD Video/DVD Audio:

1 Show the disc menu.

2 Select an item on the disc menu.

• With some discs, you can also select items by entering the

number using the number buttons.

7 For SVCD/VCD with PBC:

While playing a disc with PBC, “PBC” appears on the

display.

When disc menu appears on the TV, select an item on the

menu. Playback of the selected item starts.

To cancel PBC,

press 7, then select a track. Playback starts

with the selected track.

To reactivate PBC,

press 7 (twice if Resume is turned

“ON”), then press DVD/CD 3.

Playing Back a

Portable Audio Device

By using QP Link (Quick Portable Link), you can easily start

playing back a portable audio device connected to the AUX

jack.

• Make sure to set the volume of your portable audio device

loud enough so that the System can detect the sound signal.

To activate QP Link

When QP Link is activated, connecting a portable device to

the AUX jack and starting playback performs the following:

• While listening to another source...

Changes the source to AUX automatically. (If you change

from AUX to another source, QP Link will be canceled.)

• While the System is on standby...

Turns on the System and activates the AUX source

automatically (except when the display is turned off).

While QP Link plays back the device...

Examples:

To select number 5, press 5.

To select number 10, press 10.

To select number 15, press 10,

1, then 5.

To select number 30, press 10,

3, then 0.

Examples:

To select number 5, press 5.

To select number 10, press 10.

To select number 15, press 10,

1, then 5.

To select number 30, press 10,

3, then 0.

Remote

ONLY

Remote

ONLY

TOP MENU/PG MENU/PL

TV CH

ENTER/SET

TV CH

To move to the next or previous page of the current

menu:

To return to the previous menu:

GROUP/TITLE SKIP

Moves to the next page.

Moves to the previous page.

RETURN

(while holding...)

Remote

ONLY

INFO

AHB PRO

QP LINK

QPL ON

QPL OFF

(Initial setting)

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

12 3

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

Bubbles appear when

QP Link works.

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

12 3

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

Bubbles disappear

when the sound signal

stops or is too weak.

UX-G68[U].book Page 11 Tuesday, December 5, 2006 4:03 PM

Daily Operations—Sound & Other Adjustments

Adjusting the Volume

You can adjust the volume level from VOL MIN to level 40

(VOL MAX).

To drop the volume in a moment

Adjusting the Sound

To reinforce the heavy sound

This boosts the low and high frequency sound—Sound

Turbo II.

• When Sound Turbo II is turned on, AHB Pro is

automatically turned on, and cannot be turned off.

(AHB PRO indicator does not light even though the

function is turned on.)

To reinforce the bass sound

While Sound Turbo II is off, the richness and fullness of the

bass sound is clearly maintained regardless of how you set

the volume—Active Hyper Bass Pro.

• When Sound Turbo II is turned on, AHB Pro setting cannot

be changed.

SOUND

TURBO

VOLUME +,–

3D PHONIC/

HP SURROUND

Remote control

Main unit

SOUND

TURBO

AUDIO VOL

+,–

A.STANDBY

SLEEP

ENTER/SET

AHB PRO

DISPLAY

CLOCK/TIMER

BASS/TREBLE

VFP

DVD/AUX

LEVEL

DIMMER

SCAN MODE

SHIFT

FADE

MUTING

,, ,

3D PHONIC

CANCEL

Remote control: Main unit:

To restore the volume,

press again, or

adjust the volume level.

AUDIO VOL

TV VOL

VOLUME

Remote

ONLY

FADE

MUTING

INFO

SOUND

TURBO

TURBO ON

TURBOOFF

Remote

ONLY

AHB PRO

QP LINK

AHB ON

AHB OFF

(while holding...)

UX-G68[U].book Page 12 Tuesday, December 5, 2006 4:03 PM

To adjust the tone

You can adjust the bass and treble level from –3 to +3.

To adjust the bass

To adjust the treble

Creating 3-dimensional Sound Field

—3D Phonic

• This does not function for MPEG-1/MPEG-2/ASF/DivX

discs.

While playing a disc...

Using Headphone Surround

You can enjoy a surround effect while listening through

headphones.

• This only functions for disc/USB mass storage class device

playback.

• This does not function for MPEG-1/MPEG-2/ASF/DivX

discs.

While playing a disc...

• If you plug in the headphones while 3D Phonic is activated,

Headphone Surround turns to SURR ON automatically.

• When 3D Phonic is OFF and Headphone Surround is SURR

ON, unplugging the headphones turns 3D Phonic to ACTION.

Presetting Automatic DVD Video Sound

Increase Level

DVD Video sound is sometimes recorded at a lower level

than other discs and sources. You can set the increase level

for the currently loaded DVD Video, so you do not have to

adjust the volume when you change the source.

• This only functions for DVD Video and DVD-VR format disc.

Changing the Display Brightness

You can dim the display window.

* “AUTO DIM” does not work for CD/MP3/WMA/WAV.

Remote control: Main unit:

ACTION Suitable for action movies and sports

programs.

DRAMA Creates natural and warm sound. Enjoy

movies in a relaxed mood.

THEATER Enjoy sound effects like in a major theater.

Remote

ONLY

BASS/

TREBLE

BASS

TREBLE

AUDIO VOL

TV VOL

Canceled

BASS/

TREBLE

BASS

TREBLE

AUDIO VOL

TV VOL

Canceled

3D PHONIC

(while holding...)

3D PHONIC

ACTION

3D PHONIC

DRAMA

3D PHONIC

THEATER

3D PHONIC

OFF

Remote control: Main unit:

SURR ON

Creates a dynamic sound through the headphones.

NORMAL Original recording level.

MIDDLE Output level is increased (less than “HIGH”).

HIGH Output level is increased (more than

“MIDDLE”). (initial setting)

DIM ON Dims the display.

AUTO DIM*

Removes the display illumination when

starting playback a disc with a video source.

• The display illuminates when playback

stops.

3D PHONIC

(while holding...)

SURR ON

SURR OFF

Remote

ONLY

DVD/AUX

LEVEL

NORMAL MIDDLE

HIGH

Remote

ONLY

DIMMER

DIM ON

AUTO DIM

DIM OFF

(while holding...)

(Canceled)

UX-G68[U].book Page 13 Tuesday, December 5, 2006 4:03 PM

Adjusting the Audio Input Level

If the sound from the component connected to the

AUX jack is too loud or is too quiet when changing from

another source to “AUX,” you can change the audio input

level through the AUX jack (without changing the volume

level).

While the “AUX” is selected as a source...

Changing the Scanning Mode

Select the color system and the video signal mode according

to the type of your TV. If you connect a progressive TV to

the System through the COMPONENT jacks, you can enjoy

a high quality picture from the built-in DVD player by

selecting “PAL PRG” or “NTSC PRG.”

Changing the Picture Tone

• While showing a playback picture on the TV, you can

select a preset picture tone, or adjust it and store your own

taste.

To select a preset picture tone

While playing, display VFP setting screen.

2 Select a preset picture tone.

To remove the screen,

press VFP again while holding

SHIFT.

To adjust the picture tone

Select “USER1” or “USER2.”

• Follow steps 1 and 2 explained above.

2 Select a parameter you want to adjust.

AUX LVL1 Select this when the sound is too loud with

“AUX LVL2” selected. This setting is

recommended for listening and recording

when connecting an audio device other than a

portable audio device to the AUX jack.

AUX LVL2 Select this when the sound is too loud with

“AUX LVL3” selected.

AUX LVL3 Select this when listening to a portable audio

device or recording the sound from it (initial

setting).

PAL Select for a conventional PAL TV.

PAL PRG Select for a progressive PAL TV.

Select to enjoy a progressive scanned

picture with a progressive PAL TV.

NTSC Select for a conventional NTSC TV.

NTSC PRG Select for a progressive NTSC TV.

Select to enjoy a progressive scanned

picture with a progressive NTSC TV.

Remote

ONLY

AUX LVL1 AUX LVL2

DVD/AUX

LEVEL

AUX LVL3

Remote

ONLY

INFO

SCAN MODE

PAL PRGPAL

NTSC PRG

NTSC

ENTER/SET

(while holding...)

NORMAL Normally select this.

CINEMA Suitable for a movie source.

USER1/USER2 You can adjust parameters and can

store the settings.

GAMMA Adjust if the neutral color is bright or

dark (–3 to +3).

BRIGHTNESS Adjust if the entire picture is bright

or dark (–8 to +8).

CONTRAST Adjust if the far and near positions

are unnatural (–7 to +7).

SATURATION Adjust if the picture is whitish or

blackish (–7 to +7).

TINT Adjust if the human skin color is

unnatural (–7 to +7).

SHARPNESS Adjust if the picture is indistinct

(–8 to +8).

Remote

ONLY

VFP

NORMAL

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

(while holding...)

On the TV

NORMAL CINEMA

USER2

USER1

ENTER/SET

TV CH

UX-G68[U].book Page 14 Tuesday, December 5, 2006 4:03 PM

3 Adjust the parameter.

4 Repeat steps 2 to 3 to adjust other parameters.

To erase the screen,

press VFP again while holding SHIFT.

Setting the Clock

Without setting the built-in clock, you cannot use Daily

Timers (see page 33).

• To exit from setting the clock, press CLOCK/TIMER

(while holding SHIFT) as required.

• To correct a mis-entry during the process, press CANCEL

(while holding SHIFT) or CLOCK/TIMER (while holding

SHIFT). You can return to the previous step.

1 Activate the clock setting mode.

• If you have already adjusted the clock before, press the

button repeatedly until the clock setting mode is

selected.

2 Set the time.

• Adjust the hour, then the minute.

Now the built-in clock starts working.

To check the current clock time during play

Ex.: While playing a disc...

* Only when the source is DVD/CD.

** DVD-VR: Program number/play list number and chapter

number.

DVD Audio/MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/

ASF/DivX: Group and track/file number.

DVD Video: Title and chapter number.

Turning Off the Power Automatically

Auto Standby

When Auto Standby is in use, the A.STBY indicator lights

on the display.

When disc play stops, the A.STBY indicator starts flashing.

If no operation is done for about 3 minutes while the

indicator is flashing, the System turns off (standby)

automatically.

Sleep Timer

You can set the shut-off time so that you can go to bed

without turning it off yourself.

1 Specify the time (in minutes).

2 Wait until the set time disappears.

To check the time remaining until the shut-off time, press

SLEEP while holding SHIFT.

• If you press the button repeatedly, you can change

the shut-off time.

ENTER/SET

TV CH

Remote

ONLY

INFO

CLOCK/TIMER

MP3

WMA

RND

3DPHONIC

BONUS

PRO

PRGM

USB

MIC

V.MASK C.V

(while holding...)

ENTER/SET

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

12 3

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

DISPLAY

Source information

Clock

Disc/file type*

Title and chapter

number**

Remote

ONLY

A.STANDBY

(while holding...)

Canceled

SLEEP

10 20 30 60 90 120 150

180

(while holding...)

Canceled

UX-G68[U].book Page 15 Tuesday, December 5, 2006 4:03 PM

Unique DVD/VCD Operations

Selecting the Audio Track

For DVD Video/DivX:

While playing back a chapter

containing audio languages, you can select the language to

listen to.

For DVD Audio:

While playing back a track containing

audio channels, you can select the audio channel to listen to.

For DVD-VR and SVCD/VCD:

When playing back a track,

you can select the audio channel to play.

• You can also select the audio track using the on-screen bar

(see page 22).

While playing a DVD Video...

While playing a DVD Audio/DivX...

While playing a DVD-VR, or SVCD/VCD...

• SVCD can have 4 audio channels. SVCD usually uses

these 4 channels to record two 2-channel recordings (ST1/

ST2).

ANGLE

ENTER

/SET

SLOW ,

AUDIO/MPX

ZOOM

SHIFT

DVD/CD 3

,, ,

C.VOICE

PAGE

SUBTITLE

Remote control

Number

buttons

ST1/ST2/

To listen to normal stereo (2-channel)

playback.

L1/L2/L To listen to the left audio channel.

R1/R2/R To listen to the right audio channel.

Remote

ONLY

INFO

AUDIO/MPX

ENGLISH

1/3

3/3

FRENCH

2/3

JAPANESE

ENGLISH

1/3

FRENCH

2/3

JAPANESE

3/3

Ex.:

1/3

2/3

3/3

Ex.:

AUDIO/MPX

ST1 ST2 L1

R2 L2 R1

ST L R

SVCD

DVD-VR/VCD

UX-G68[U].book Page 16 Tuesday, December 5, 2006 4:03 PM

Selecting the Subtitle Language

For DVD Video/DivX:

While playing back a chapter

containing subtitles in different languages, you can select the

subtitle language to display on the TV.

For DVD-VR:

While playing, you can turn the subtitles on

or off.

For SVCD:

While playing, you can select the subtitles even

if no subtitles are recorded on the disc.

• You can also select the subtitle language using the

on-screen bar (see page 22).

While playing a DVD Video

/DivX

...

While playing a DVD-VR...

While playing an SVCD...

Selecting the View Angle

For DVD Video only:

While playing back a chapter

containing multi-view angles, you can view the same scene

from different angles.

• You can also select the multi-view angles using the on-

screen bar (see page 22).

While playing...

Selecting the Browsable Still Pictures

For DVD Audio only:

While playing back a track linked to

browsable still pictures (B.S.P.), you can select the still

picture (turn the page) to be shown on the TV screen.

• If a track is linked to browsable still pictures (B.S.P.), they

are usually shown automatically during playback.

• You can also select the page using the on-screen bar (see

page 25).

Playing Back Bonus Group

For DVD Audio only: Some DVD Audio discs have a

special group called “bonus group” whose contents are not

open to the public.

• To playback a bonus group, you have to enter the specific

“key number” (a kind of password) for the bonus group.

The way of getting the key number depends on the disc.

1 Select the bonus group.

• The bonus group is usually recorded as the last group

(for example, if a disc contains 4 groups including a

bonus group, “group 4” is the bonus group).

• For how to select the group, see “To select a title/group”

on page 10.

Continued on the next page

Remote

ONLY

SUBTITLE

ENGLISH

1/3

ENGLISH

1/3

3/3

2/3

FRENCH JAPANESEENGLISH

1/3 2/3

JAPANESE

3/3

ENGLISH FRENCH JAPANESE

TV CH

Ex.:

OFF

SUBTITLE

Each time you press

the button (while

holding SHIFT), the

still picture changes

one after another (if

available).

Remote

ONLY

1/3

2/3

3/3

1/3

2/3

3/3

ANGLE

Ex.:

(while holding...)

Remote

ONLY

PA G E

SUBTITLE

(while holding...)

Remote

ONLY

UX-G68[U].book Page 17 Tuesday, December 5, 2006 4:03 PM

2 Enter the key number.

Follow the interactive instructions shown on the

screen.

To cancel the key number entry,

press 7.

Making Dialogues Clear—Clear Voice

When you playback a disc or USB mass storage class device,

you can make the singer’s voices or dialogues of the movie

clear—Clear Voice. When Clear Voice is in use, the

C.VOICE indicator lights on the display.

• This function works for center-channel encoded multi-

channel discs and 2-channel discs with 3D Phonic

activated.

Special Effect Playback

Pause playback

Frame-by-frame playback

While playing...

2 Advance the still picture frame by frame.

To resume normal playback,

press DVD/CD 3.

Slow-motion playback

• This does not function for MPEG-1/MPEG-2/ASF/DivX

discs.

1 While playing...

2 Select slow motion speed.

* Only available for DVD Video.

To resume normal playback,

press DVD/CD 3.

To replay the previous scenes

(One-Touch Replay)

• This function is only used while playing DVD Video/

DVD-VR.

While playing back...

Zoom

While playing back...

2 Move the zoomed-in position.

To cancel Zoom,

press ZOOM (while holding SHIFT)

repeatedly until “ZOOM OFF” appears on the TV.

To pause: To resume normal

playback:

While playing...

Still picture playback starts.

ENTER/SET

Remote

ONLY

C.VOICE

(while holding...)

Off

Remote

ONLY

INFO

DVD/CD

Still picture playback starts.

The playback position moves

back about 10 seconds before the

current position (only within the

same title).

SLOW

–

1/32 1/16 1/8 1/4 1/2

Reverse slow motion*

starts.

Forward slow motion starts.

ZOOM 1

ZOOM OFF

ZOOM

ZOOM 2 ZOOM 3 ZOOM 4

ZOOM 6 ZOOM 5

(while holding...)

TV CH

UX-G68[U].book Page 18 Tuesday, December 5, 2006 4:03 PM

Advanced Playback Operations

Programming the Playing Order

—Program Play

You can arrange the playing order of the chapters or tracks

(up to 99) before you start playback.

• Program play cannot be used for DVD-VR/JPEG/

MPEG-1/MPEG-2/ASF/DivX and files in a USB mass

storage class device.

• Resume does not work for Program Play.

1 Before starting playback, activate Program Play.

2 Select chapters or tracks you want for Program Play.

• For DVD Video/DVD Audio/MP3/WMA/WAV:

1 Select a title or group number.

2 Select a chapter or track number.

3 Repeat the above steps 1 and 2.

• For SVCD/VCD/CD:

1 Select tracks.

Remote control

SHIFT

CANCEL

DVD/CD 3

FM/PLAY

MODE

REPEAT A-B

REPEAT

ZOOM

ENTER/SET

,, ,

MENU/PL

TOP MENU/PG

ON SCREEN

USB

MEMORY

Number

buttons

Main unit

, 7,

DVD/CD #/

USB

MEMORY

To enter the numbers directly:

Examples:

To enter number 5, press 5.

To enter number 10, press 10.

To enter number 15, press 10,

1, then 5.

To enter number 30, press 10,

3, then 10.

Remote

ONLY

INFO

FM/PLAY

MODE

PROGRAM RANDOM

USE NUMERIC KEYS TO PROGRAM TRACKS.

USE CANCEL TO DELETE THE PROGRAM.

PROGRAM

No Group/Title Track/Chapter

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

12 3

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

On the display

On the TV

Canceled

Continued on the next page

UX-G68[U].book Page 19 Tuesday, December 5, 2006 4:03 PM

3 Start playback.

To check the programmed contents

Before or after playback...

• You can also use 4 or x to check the programmed

contents.

To modify the program

Before or after playback...

To exit from Program Play

Before or after playback...

Playing at Random—Random Play

You can play all chapters or tracks at random.

• Random Play cannot be used for DVD-VR/JPEG/

MPEG-1/MPEG-2/ASF/DivX, some DVDs and files in the

USB mass storage class device.

1 Before starting playback, activate Random Play.

2 Start playback.

To exit from Random Play

Before or after playback...

Playback starts in the order you

have programmed.

To skip a step: To pause: To stop:

To release, press

DVD/CD 3.

To erase the last track/file:

To erase the entire program: To add another track/

file to the program:

Repeat step 2.

DVD/CD

GROUP/TITLE SKIP

TV CH

In the programmed order.

In the reverse order.

CANCEL

(while holding...)

CANCEL

(while holding...)

2 sec.

FM/PLAY

MODE

PROGRAM RANDOM

Canceled

Playback starts in random order.

Random Play ends when the

entire disc has been played.

To skip a chapter/

track:

To pause: To stop:

To release, press

DVD/CD 3.

Remote

ONLY

FM/PLAY

MODE

PROGRAM RANDOM

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

12 3

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

Canceled

DVD/CD

FM/PLAY

MODE

PROGRAM RANDOM

Canceled

UX-G68[U].book Page 20 Tuesday, December 5, 2006 4:03 PM

Playing Repeatedly

• You can also select the repeat mode using the on-screen bar

(see pages 23 and 24).

• For MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/ASF/

DivX, see page 27.

Repeat Play

You can repeat playback.

•

For DVD Video:

While playing...

•

For DVD Audio:

While playing or before playback...

•

For CD/SVCD/VCD:

While playing (without PBC for SVCD/VCD) or before

playback...

•

For DVD-VR:

While playing an original program...

While playing a Program List...

* During Program Play and Random Play, “REP STEP”

appears instead of these indications, and repeat modes

change as follows for all the discs.

A-B Repeat

You can repeat playback of a desired portion by specifying

the beginning (point A) and the ending (point B).

• A-B Repeat cannot be used for MP3/WMA/WAV/MPEG-1/

MPEG-2/ASF/DivX, some DVDs and files in the USB mass

storage class device.

1 While playing (without PBC for SVCD/VCD), select

the start point (A).

2 Select the end point (B).

To cancel A-B Repeat,

press REPEAT A-B again while

holding SHIFT.

• A-B Repeat will also be canceled when you stop play or

skip the chapter or track.

Prohibiting Disc Ejection—Child Lock

You can lock the disc tray so that no one can eject the loaded

disc.

• This is possible only while the System is on standby.

While the disc tray is closed...

To cancel the prohibition,

repeat the same procedure.

“UNLOCKED” appears on the display.

REP CHAP

* Repeats the current chapter.

REP TTL Repeats the current title.

REP TRK* Repeats the current track.

REP GRP Repeats the current group.

REP PG Repeats the current program.

REP ALL Repeats the disc or program.

REP PL Repeats the current Program List.

Remote

ONLY

INFO

REPEAT

REP OFF

REP CHAP REP TTL

REPEAT A-B

(Canceled)

REPEAT

REP OFF

REP TRK REP GRP

REPEAT A-B

(Canceled)

REPEAT

REP OFF

REP TRK

REP ALL

REPEAT A-B

(Canceled)

REPEAT

REP OFF

REP CHAP REP PG

REP ALL

REPEAT A-B

(Canceled)

REPEAT

REP OFF

REP CHAP REP PL

REPEAT A-B

(Canceled)

starts flashing on the

display.

• appears on the

TV if the TV is turned on.

stops flashing.

• appears on the

TV.

• You can search for the

end point using the y

button.

REP OFF

REP STEP REP ALL

(Canceled)

REPEAT

REPEAT A-B

(while holding...)

A-

REPEAT

REPEAT A-B

(while holding...)

A-B

Main Unit

ONLY

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

12 3

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

(while holding...)

UX-G68[U].book Page 21 Tuesday, December 5, 2006 4:03 PM

On-screen Bar Operations

You can check the disc information and use some functions

through the on-screen bar.

Remote

ONLY

INFO

OFF

1/ 3

TIME

TRACK

DVD-AUDIO

GROUP 14

TIME 0:00:58

TRACK 23

1/ 3

PAGE

LPCM

2/0.0ch

OFF

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

DVD-VIDEO

TITLE 2

TIME OFF CHAP. 1/31/ 3 1/1

TIME 0:00:58

CHAP 3

Dolby D

3/2.1ch

OFF

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

SVCD

TIME OFF ST1

TRACK 3

1/3

-/ 4

TIME 0:00:58

OFF

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

VCD

TIME OFF ST

TRACK 3

TIME 0:00:58

OFF

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

TIME OFF

TRACK 3

TIME 0:00:58

TOTAL

1:25:58

CHAP

USB

TIME 00:00:58

213

On-screen bars

DVD Video

DVD Audio

SVCD

VCD

MPEG-1/MPEG-2/ASF/DivX

TOTAL

1:25:58

CHAP

FILE

TIME 00:00:58

213

USB for MPEG-1/MPEG-2/ASF/DivX

DVD-VR

On-screen Bar Information

1 Disc type

2 Playback information

Indication Meanings

Dolby D, LPCM Audio format

3/2.1ch, 2/0.0 ch Channel number

Current title

Current chapter

Current group

Current track

Current title

Current play list

Time indications

3 Operation modes

Indication Meanings

Playback

/ Forward/Reverse search

/ Forward/Reverse slow-motion

Pause

Stop

4 Function icons (on the pull-down menu)

Indication Meanings

Select to change the time

indication.

Select to repeat playback.

Select for time search.

Select for chapter search.

Select for track search.

Select to change the audio

language or channel (see also

page 16).

Select to change subtitle

language (see also page 17).

Select to change the view angle

(see also page 17).

Select to change the page (see

also page 17).

TITLE

CHAP

GROUP 1

TRACK

TOTAL

1:25:58

TIME

OFF

CHAP.

TRACK

1/3

PAGE 1 / 5

UX-G68[U].book Page 22 Tuesday, December 5, 2006 4:03 PM

To operate using the On-screen Bar

Ex.: Selecting a subtitle (French) for DVD Video

While a disc is selected as the source...

1 Display the entire on-screen bar.

* This does not appear for MP3/WMA/WAV/JPEG/MPEG-

1/MPEG-2/ASF/DivX discs and files in a USB mass

storage class device.

2 Select (highlight) the item you want.

3 Display the pop-up window.

4 Select the desired option in the pop-up window.

5 Finish the setting.

To remove the on-screen bar

To change the time information

You can change the time information in the on-screen bar

and the display window on the main unit.

1 While playing, display the on-screen bar with the

pull-down menu.

2 Make sure is selected (highlighted).

3 Change the time indication.

To remove the on-screen bar

Repeat Play

• See also page 21.

1 While playing a disc (without PBC for SVCD/VCD),

display the entire on-screen bar.

• Repeat Play can be selected before starting playback,

except for DVD Video/DVD-VR.

2 Select .

3 Display the pop-up window.

Pop-up window disappears.

ON SCREEN

OFF

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

DVD-VIDEO

TITLE 2

TIME OFF CHAP. 1/31/31/1

TIME 0:00:58

CHAP 3

Dolby D

3/2.1ch

DVD-VIDEO

TITLE 2

TIME 0:00:58

CHAP 3

Dolby D

3/2.1ch

disappears

OFF

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

DVD-VIDEO

TITLE 2

TIME OFF CHAP. 1/31/31/1

TIME 0:00:58

CHAP 3

Dolby D

3/2.1ch

ENTER/SET

1/3

1/3 1/3

TOTAL

1:25:58

CHAP

TITLE 2

1/31/31/1

TOTAL 1:01:58

CHAP 3

ENGLISH

TV CH

1/3

1/3 1/3

ITLE

TOTAL

1:25:58

CHAP

TITLE 2

1/32/31/1

TOTAL 1:01:58

CHAP 3

FRENCH

ENTER/SET

ON SCREEN

For detailed operations of the following functions, see

also “To operate using the On-screen Bar” on the left.

TIME Elapsed playing time of the current

chapter/track (except for DVD-VR).

REM Remaining time of the current chapter/

track (except for DVD-VR).

TOTAL Elapsed disc time.

T. REM Remaining disc time.

OFF

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

DVD-VIDEO

TITLE 2

TIME OFF CHAP. 1/31/31/1

TIME 0:00:58

CHAP 3

Dolby D

3/2.1ch

TIME

ENTER/SET

TOTAL 1:01:58T. REM 0:35:24

REM 0:11:23

TIME 0:00:58

ON SCREEN

OFF

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

DVD-VIDEO

TITLE 2

TIME OFF CHAP. 1/31/31/1

TOTAL 1:01:58

CHAP 3

OFF

Dolby D

3/2.1ch

Continued on the next page

UX-G68[U].book Page 23 Tuesday, December 5, 2006 4:03 PM

4 Select the repeat mode you want.

While playing a DVD-VR disc, “PG” appears, and

while playing a Play list, “PL” appears.

During Program Play and Random Play, “STEP”

appears.

5 Finish the setting.

A-B Repeat

• See also page 21.

1 While playing, display the entire on-screen bar.

2 Select .

3 Display the pop-up window.

4 Select “A-B.”

5 Select the start point (A).

6 Select the end point (B).

To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF”

in step 4.

Time Search

You can move to a particular point by specifying the elapsed

playing time from the beginning.

1 While playing (without PBC for SVCD/VCD), display

the entire on-screen bar.

• Time Search can be used before starting playback,

except for DVD Video/DVD-VR.

2 Select .

3 Display the pop-up window.

4 Enter the time.

You can specify the time in hours/minutes/seconds.

• It is always required to enter the hour digit (even “0”

hour), but it is not required to enter trailing zeros (the

last two digits in the examples above).

•

To correct a mis-entry,

press cursor

to erase the last

entry.

5 Finish the setting.

Chapter/Track Search

You can search for the chapter (DVD Video/DVD-VR) or

track (DVD Audio) number to play.

1 While playing, display the entire on-screen bar.

2 Select or .

3 Display the pop-up window.

A-B Repeats a desired portion (see below).

TITLE*

Repeats the current title.

GROUP Repeats the current group.

ALL Repeats the disc (except for DVD) or

program.

CHAPTER*

Repeats the current chapter.

TRACK*

Repeats the current track.

OFF Cancels Repeat Play.

A-B Repeat starts. The selected

portion plays repeatedly.

• Before pressing ENTER/SET, you

can search for the end point using

the y button.

ENTER/SET

OFF

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

DVD-VIDEO

TITLE 2

TIME OFF CHAP. 1/31/31/1

TOTAL 1:01:58

CHAP 3

OFF

Dolby D

3/2.1ch

OFF

TIME

DVD-VIDEO

TIME OFF CHAP.

A–B

Dolby D

3/2.1ch

TV CH

ENTER/SET

1/3

TIME

TITLE

DVD-VIDEO

TITLE 2

TIME A- CHAP. 1/3

Dolby D

3/2.1ch

ENTER/SET

Examples:

To move to a point of 1

(hours): 02 (minutes): 00

(seconds), press 1, 0, 2, 0, then

To move to a point of 54

(minutes): 00 (seconds), press

0, 5, 4, 0, then 0.

The System starts playing the disc

from the selected playing time.

OFF

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

DVD-VIDEO

TITLE 2

TIME OFF CHAP. 1/31/31/1

TIME 0:00:58

CHAP 3

TIME _ : _ _ : _ _

Dolby D

3/2.1ch

ENTER/SET

CHAP. TRACK

CHAPTER _

1/3

1/3 1/3

TIME

TITLE

TOTAL

1:25:58

CHAP

DVD-VIDEO

TITLE 2

TIME OFF CHAP. 1/31/31/1

TOTAL 1:01:58

CHAP 3

Dolby D

3/2.1ch

UX-G68[U].book Page 24 Tuesday, December 5, 2006 4:03 PM

4 Enter the desired chapter/track number.

•

To correct a mis-entry,

press the number buttons until

the desired number shown in the pop-up window.

5 Finish the setting.

Browsable Still Pictures

For DVD Audio only: While playing back a track linked to

browsable still pictures (B.S.P.), you can select the still

picture (turn the page) to be shown on the TV.

• If a track is linked to browsable still pictures (B.S.P.), they

are usually shown automatically during playback.

1 While playing a DVD Audio, display the entire

on-screen bar.

2 Select .

3 Display the pop-up window.

4 Select a still picture you want.

5 Finish the setting.

Control screen for DVD-R/-RW in DVD-VR format

The control screen is superimposed on the TV screen when

you call up Program List (PG) or Play List (PL).

To select playback type

To select an item in the list and start playback

Examples:

To select chapter/track 5, press

To select chapter/track 10,

press 1, then 0.

To select chapter/track 15,

press 1, then 5.

To select chapter/track 30,

press 3, then 0.

The System starts playing the

searched chapter or track.

ENTER/SET

PAGE 1 / 5

OFF

1/3

TIME

TRACK

DVD-AUDIO

GROUP 14

TIME 0:00:58

TRACK 23

1/5

PAGE

LPCM

2/0.0ch

1/3

P 14

TIME 0:00:58

TRACK 23

3/5

PAGE

TV CH

ENTER/SET

To select the Program

List:

To select the Play List:

To remove the list, press the same button again.

Ex.: When Program List is selected.

Ex.: When Play List is selected.

1 Listed number

2 Recording date

3 Recording channels

4 Recording time

5 Title

6 Highlight bar (current selection)

7 Chapters included

8 Playback time

TOP MENU/PG

MENU/PL

ORIGINAL PROGRAM

No Date Ch Time Title

1 03/12/07 12:15L

2 09/12/07 23:05

3 18/12/07 08:17

4 20/12/07 07:47

5 25/12/07 19:38 Mr. Lawrence

Satisfy U

La fleur

The last struggle

free flyer

BOOM!

6 28/12/07 14:20

12 3 4 5 6

PLAY LIST

No Date Chap Length Title

1 03/12/07 002 0:23:24 Nebula G.

CDJ

Secret Garden

S. Walker

2 15/12/07 004 1:04:39

3 24/12/07 013 0:41:26

4 27/12/07 017 0:09:08

67812

ENTER/SET

TV CH

UX-G68[U].book Page 25 Tuesday, December 5, 2006 4:03 PM

Audio/Video File Operations

Operations on the Control Screen

You can search for and play the desired items through the

control screen for MP3/WMA/WAV/JPEG/MPEG-1/

MPEG-2/ASF/DivX files.

Control screen for MP3/WMA/WAV/JPEG/

MPEG-1/MPEG-2/ASF/DivX files

The control screen automatically appears on the TV screen

when you load a disc or connect and select a USB mass

storage class device in which MP3, WMA, WAV, JPEG,

MPEG-1, MPEG-2, ASF, or DivX is recorded.

To move the highlight bar between group list and track

list

To select an item in the list

GROUP/TITLE

ENTER/SET

REPEAT A-B

REPEAT

VD/CD 3

ZOOM

,, ,

USB MEMORY 3

SHIFT

GROUP/TITLE

SKIP

Remote control

Remote

ONLY

INFO

Ex.: While playing a MP3 disc.

1 Current group number/total group number

2 Current group

3 Group list

4 Track information (ID3 Tag Version 1.0: only for

MP3/WMA/WAV)

5 Current track

6 Random/Program Play setting (except for USB)

7 Repeat Play setting

8 Elapsed playing time of the current track

(except for JPEG)

9 Operation mode icon

0 Current track number/total number of tracks in the

current group (total number of tracks on the loaded

disc)

- Highlight bar

= Track list

• If files of different types (MP3, WMA, WAV, JPEG,

MPEG-1, MPEG-2, ASF and DivX) are recorded on a

disc or device, select the file type to play (see

page 35).

Move the highlight bar to the

desired item.

• If you move the highlight bar

while playing back an MP3/

WMA/WAV file or DVD-VR

(PG/PL) disc, the selected track

starts playback automatically.

Group : 2 / 3

TIME : 00:00:14REPEAT STEP

Track : 6 / 14 (Total 41)

Spring

Summer

Fall

Winter

Track Information

Cloudy.mp3

Fair.mp3

Fog.mp3

Hail.mp3

Indian summer.mp3

Rain.mp3

Shower.mp3

Snow.mp3

Thunder.mp3

Typhoon.mp3

Wind.mp3

Winter sky.mp3

Title

Rain

Artist

Album

RANDOM

Moves the bar to the track

list.

Moves the bar to the group

list.

TV CH

UX-G68[U].book Page 26 Tuesday, December 5, 2006 4:03 PM

To start playback

• Once you start viewing a JPEG/MPEG-1/MPEG-2/

ASF/DivX track, the control screen disappears.

• To cancel slide-show and display the current still picture,

press 8.

• You can select a group directly by pressing a number

button after pressing GROUP/TITLE (except for DVD-VR

disc).

To repeat MP3

WMA/WAV playback

While playing or before playback...

To repeat slide-show for JPEG

While playing or before playback...

To repeat MPEG-1/MPEG-2/ASF

DivX playback

While playing or before playback...

* During Program Play and Random Play, “REP STEP”

appears instead of this indication.

To zoom in the JPEG files

• You cannot zoom in the still picture during slide-show.

1 While playing back a still picture...

• During slide-show, press 8 to display the still picture,

then...

2 Move the zoomed-in position.

To cancel Zoom,

press ZOOM (while holding SHIFT)

repeatedly until “ZOOM OFF” appears on the TV.

For JPEG:

The selected track (still picture)

is displayed until you change it.

Press one of the buttons

depending on the current source.

Slide-show playback starts.

Each track (still picture) is shown

on the screen for about 3

seconds, then changes one after

another.

For the other files:

Playback starts with the selected

track.

• Pressing DVD/CD 3 or

USB MEMORY 3 also starts

playback.

To select a group:

To skip a track: To stop playback:

ENTER/SET

DVD/CD

USB

MEMORY

DVD/CD

USB

ENTER/SET

GROUP/TITLE SKIP

(while holding...)

GROUP/TITLE SKIP

REP TRK* Repeats the current track.

REP GRP Repeats the current group.

REP ALL Repeats the disc.

REPEAT

REP OFF

REP TRK

REP GRP

REP ALL

REPEAT A-B

(Canceled)

REPEAT

REP OFF

REP GRP REP ALL

REPEAT A-B

(Canceled)

REPEAT

REP OFF

REP TRK

REP GRP

REP ALL

REPEAT A-B

(Canceled)

ZOOM

ZOOM 1 ZOOM 2

ZOOM OFF

(while holding...)

TV CH

UX-G68[U].book Page 27 Tuesday, December 5, 2006 4:03 PM

Advanced Tape Operations

Recording on a Tape

You can use type I tapes for recording.

• To play a tape, see page 9.

1 Insert a recordable cassette.

2 Select and start playing the source—“FM,” “AM,”

“DVD/CD,” “USB MEM,” or “AUX.”

• When recording from a disc or USB source, you can

also use “Synchronized Recording” (see page 29).

3 Start recording.

DVD/CD

USB

MEMORY #/

PUSH OPEN 0

REC

TAPE

FM/AM/AUX

Remote control

Main unit

TAPE

DVD/CD

FM/AM/AUX

USB MEMORY

IMPORTANT

It may be unlawful to record or playback copyrighted

material without the consent of the copyright owner.

To stop recording:

INFO

With the tape side facing outside

Push Insert

REC

On the main unit

UX-G68[U].book Page 28 Tuesday, December 5, 2006 4:03 PM

Synchronized Recording

You can start and stop both playback and tape recording at

the same time.

To record the entire tracks

Load a disc or connect a USB mass storage class

device and insert a recordable cassette.

• Press DVD/CD 3 or USB MEMORY 3 to select the

current playing source, then 7.

2 Start recording.

• When either playback* or recording ends, both playback

and recording stop at the same time.

* For DVD Video: When a title is finished playing.

• When the tape reaches its end, both playback and recording

also stop at the same time.

To record only your favorite track

You can specify tracks to be recorded on the tape while

listening from a disc (except for DVD Video/DVD-VR) or

USB mass storage class device.

1 Start playing a disc/file.

2 While a track you want to record on the tape is

playing...

3 Repeat steps 1 and 2 to record other tracks you want.

• You can change the disc if necessary.

On the main unit

The System automatically

creates 4-second blanks between

the tunes recorded on the tapes.

To record a “Live” disc

It will not be desirable to put 4-second blank portions

between the tunes recorded on the tape.

To record the entire tracks without any interruption

recorded, pause playback (press DVD/CD 3 or USB

MEMORY 3, then 8) before pressing REC.

To record Program Play

1 Select Program Play (and make a program), but do not

start playback.

2 Press REC to start recording.

• When disc play stops, recording stops automatically.

INFO

REC

Playback returns to the

beginning of that track and the

track is recorded on the tape.

After recording the track,

playback and recording

automatically stop.

To protect your recording

Cassettes have two small tabs on the back to protect

from unexpected erasure or re-recording.

To protect your recording,

remove these tabs.

To re-record on a protected tape,

cover the holes with

adhesive tape.

DVD/CD

USB

MEMORY

REC

On the main unit

UX-G68[U].book Page 29 Tuesday, December 5, 2006 4:03 PM

Enjoying Karaoke

Singing Along (Karaoke)

To sing along using the Karaoke discs

You can enjoy Karaoke using the Karaoke disc (except

Karaoke CD).

• By pressing REC, you can record your singing-along (for

SVCD/VCD without PBC).

1 Turn MIC VOLUME to MIN.

2 Connect the microphone (not supplied) to the MIC

jack.

3 Insert and start playing a Karaoke disc.

4 Select an audio track.

• For details, see “Selecting the Audio Track” on page 16.

5 Sing into the microphone.

6 Adjust the MIC VOLUME and VOLUME.

SHIFT

KARAOKE

AUDIO/MPX

RESERVE

TAPE

DVD/CD

ECHO

FM/AM

/AUX

USB MEMORY

KEY KEY

MIC VOLUME

DVD/CD

USB

MEMORY

REC

TAPE

FM/AM/AUX

VOLUME

Remote control

Main unit

MIC jack

IMPORTANT

Always set MIC VOLUME to MIN when connecting or

disconnecting the microphone.

DO NOT keep the microphone connected

while they are not in use.

INFO

VOLUME

MAXMIN

VOLUMEMIC

MAXMIN

AUDIO/MPX

VOLUME

MAXMIN

VOLUME

Karaoke function is not available in the Australian model.

UX-G68[U].book Page 30 Tuesday, December 5, 2006 4:03 PM

To adjust the Key (disc/file playback only)

Activate Key Control.

2 Adjust the Key

• Key Control cannot be activated for DVD Audio/

DVD-VR/MPEG-1/MPEG-2/ASF/DivX.

To deactivate Key Control,

press KARAOKE (while

holding SHIFT) to select “OFF.”

To apply echo to your voice

To sing along using the stereo discs/audio files

—Vocal Masking

You can enjoy Karaoke while playing a stereo disc or an

audio file.

Vocal Masking reduces the lead vocal of any disc except

DVD Audio and DVD-VR.

1 Turn MIC VOLUME to MIN.

2 Connect the microphone (not supplied) to the MIC

jack.

3 Insert and start playing a stereo disc or start playing

an audio file.

4 Activate Vocal Masking.

5 Sing into the microphone.

6 Adjust the MIC VOLUME and VOLUME.

• You can apply echo to your voice.

To deactivate Vocal Masking,

select “OFF” in step 4.

Microphone Mixing

You can enjoy microphone mixing while playing any source.

• By pressing REC, you can record your singing-along

(except when the playing source is “TAPE”).

1 Turn MIC VOLUME to MIN.

2 Connect the microphone (not supplied) to the MIC

jack.

3 Start playing the source—“FM,” “AM,” “DVD/CD,”

“USB MEM,” “TAPE,” or “AUX.”

4 Sing into the microphone.

5 Adjust the MIC VOLUME and VOLUME.

• You can apply echo to your voice. While playing a disc,

you can also adjust Key Control and apply echo.

• When selecting “TAPE” as the source, microphone

mixing is available only during tape playback.

To use the microphone only,

select “AUX” in step 3, but do

not start playback.

ON SCREEN

KARAOKE

KEYCON

V-CANCEL

OFF

(while holding...)

(Canceled)

KEY KEY

To raise the

key.

To lower the

key.

(while holding...)

MENU/PL

ECHO

ECHO ON

ECHO OFF

(while holding...)

(Canceled)

VOLUME

MAXMIN

DVD/CD

USB

MEMORY

DVD/CD USB

ON SCREEN

KARAOKE

KEYCON

V-CANCEL

OFF

(while holding...)

(Canceled)

VOLUME

MAXMIN

VOLUME

MAXMIN

VOLUME

MAXMIN

VOLUME

Karaoke function is not available in the Australian model.

UX-G68[U].book Page 31 Tuesday, December 5, 2006 4:03 PM

Reserving Karaoke Songs

—Karaoke Program Play

You can determine the playback order of the titles or tracks

on the disc player. You can program up to 12 steps.

1 Change the source to “DVD/CD.”

2 Activate Karaoke Program Play.

• PRGM indicator flashes during this mode.

3 Select songs you want for Karaoke Program Play.

Press the number buttons to select a song in the following

order.

4 Start playback.

To check the programmed contents

During Karaoke Program Play...

To modify the program

While the Karaoke reserve screen is shown on the TV...

To exit from Karaoke Program Play

Before or after playback...

During playback...

1 Select a title/group.

2 Select a chapter/track.

Examples:

To select preset number 5,

press 5.

To select preset number 10,

press 10.

To select preset number 15,

press 10, 1, then 5.

To select preset number 30,

press 10, 3, then 0.

Remote

ONLY

DVD/CD

SET UP

RESERVE

Tr/Chap

Gr/Tt

(while holding...)

On the TV screen

To remove the unwanted track:

To add another track to the program:

Repeat step 3.

To erase the entire program:

DVD/CD

Playback starts in the order

you have programmed.

The Karaoke reserve screen appears.

TV CH

CANCEL

(while holding...)

CANCEL

2 sec.

SET UP

RESERVE

(while holding...)

SET UP

RESERVE

(while holding...)

Karaoke function is not available in the Australian model.

UX-G68[U].book Page 32 Tuesday, December 5, 2006 4:03 PM

Timer Operations

Setting the Timer

Using Daily Timer, you can wake up with your favorite

music. On the other hand, with Recording Timer, you can

make a tape of a radio broadcast automatically.

You can store three Daily Timer settings and one Recording

Timer setting; however, you can activate only one of the

timers at the same time.

• To exit from the timer setting, press CLOCK/TIMER

(while holding SHIFT) as required.

• To correct a mis-entry during process, press CANCEL

(while holding SHIFT). You can go back to the previous

step.

1 Select one of the timer setting modes you want to set—

DAILY 1 ON time, DAILY 2 ON time, DAILY 3 ON

time, or REC TMR(Recording Timer) ON time.

• When the clock has not been set, pressing CLOCK/

TIMER (while holding SHIFT) makes the System enter

the clock setting mode.

2 Make the timer setting as you want.

Repeat the procedure for the following settings until

finished—

Set the hour then the minute for on-time.

Set the hour then the minute for off-time.

Select the playback source—“TUNER FM,”

“TUNER AM,” “TAPE,” “DISC,”

“USB MEM,” or “AUX.”

For “TUNER FM” and “TUNER AM”:

Select a

preset channel.

For “DISC”:

Select the title/group number, then

the chapter/track number.

For “USB

MEM

”: Select the group number, then

the track/file number.

Daily Timer initial settings when shipped from the

factory

• DAILY 1: ON Time (6:00)/OFF Time (8:00)/

Source (TUNER FM 1)/Volume level (– –)

• DAILY 2: ON Time (7:00)/OFF Time (9:00)/

Source (TUNER FM 1)/Volume level (– –)

• DAILY 3: ON Time (10:00)/OFF Time (12:00)/

Source (TUNER FM 1)/Volume level (– –)

ENTER/SET

AUDIO

CLOCK/TIMER

SHIFT

CANCEL

Remote control

Remote

ONLY

INFO

CLOCK/TIMER

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

1 23

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

Ex. When Daily Timer 1 setting mode is selected

Clock setting

(see page 15)

DAILY 1

ON (Time)

DAILY Timer 1

DAILY 2

ON (Time)

DAILY Timer 2

DAILY 3

ON (Time)

DAILY Timer 3

Canceled

(while holding...)

REC TMR

ON (Time)

Recording Timer

ENTER/SET

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

1 23

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

Continued on the next page

UX-G68[U].book Page 33 Tuesday, December 5, 2006 4:03 PM

Select the volume level.

• You can adjust the volume level (“1” to “40”

and “VOL – –”).

If you select “VOL – –,” the volume is set to the last

level when the unit has been turned off.

Once settings are completed, the Timer setting

information appears in sequence.

• This function is not available for VCD with PBC

activated.

For Recording Timer:

Set the hour then the minute for on-time.

Set the hour then the minute for off-time.

Select the playback source—“TUNER FM,”

“TUNER AM,” or “AUX.”

For “TUNER FM” and “TUNER AM”: Select a

preset channel.

Once settings are completed, the Timer setting

information appears in sequence. The volume is set to the

last level when the unit has been turned off.

3 Turn off the unit (on standby).

To turn on or off the Timer

Since Daily Timer is activated at the same time everyday,

you may need to cancel it on some particular days.

To cancel the Timer

1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3)

you want to cancel.

2 Turn off the selected Timer.

To turn on the Timer

1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3)

you want to activate.

2 Activate the selected Timer.

3 Wait until the indication disappears.

How Daily Timer works

Once the Daily Timer has been set, the timer indicator

( ) and timer number indicator (1/2/3) are lit on the

display. Daily Timer is activated at the same time

everyday until the timer is turned off manually (see the

next column) or another timer is activated.

When the on-time comes

The System turns on, tunes in to the specified station or

starts playing the loaded disc with the specified chapter or

track, and sets the volume level gradually to the preset

level after about 30 seconds.

• While Daily Timer is working, the timer indicator ( )

flashes on the display.

When the off-time comes

The System stops playback, and turns off (on standby)

automatically.

• The timer setting remains in memory until you change

it.

How Recording Timer works

When Recording Timer has been set, Timer ( )

indicator and the REC indicator are lit on the display.

Recording Timer works only once.

When the on-time comes

The System turns on, tunes in to the specified station or

changes the source to “AUX”, and starts recording.

When the off-time comes

The System stops recording, and turns off (on standby).

• The timer setting remains in memory until you change

it.

CLOCK/TIMER

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

1 23

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

Ex. To cancel Daily

Timer 1

DAILY 1

ON (Time)

DAILY Timer 1

DAILY 2

ON (Time)

DAILY Timer 2

DAILY 3

ON (Time)

DAILY Timer 3

Canceled

Clock setting

(see page 15)

(while holding...)

REC TMR

ON (Time)

Recording Timer

CANCEL

(while holding...)

CLOCK/TIMER

DAILY 1

ON (Time)

DAILY Timer 1

DAILY 2

ON (Time)

DAILY Timer 2

DAILY 3

ON (Time)

DAILY Timer 3

Canceled

Clock setting

(see page 15)

(while holding...)

ON (Time)

REC TMR

Recording Timer

ENTER/SET

MONO

MP3

WMA

RND

PRGR.

3DPHONIC

B.S.P. BONUS

NEWS

INFO

AHB PRO

A.STBY

1 23

S.TURBO

SLEEP

PRGM

QP Link

USB

SVCDVD

MIC

V.MASK C.VOICE

L-BANDIII

REC

Ex. When Daily Timer 1 (DAILY 1) is

activated

UX-G68[U].book Page 34 Tuesday, December 5, 2006 4:03 PM

Setup Menu Operations

INFO

Initial settings

The Setup Menu cannot be activated during playback.

1 Press SET UP.

2 Press (or )to select the menu.

3 Press (or ) to move to select the item.

4 Press ENTER/SET.

5 Press (or ) to select the options, then press

ENTER/SET.

• For settings of the LANGUAGE menu, see also

“Language Code List” on page 42.

To remove a preference display

Press SET UP.

ENTER/SET

SET UP

,, ,

Remote Control

Remote

ONLY

MENU LANGUAGE

ENGLISH

AUDIO LANGUAGE

ENGLISH

SUBTITLE

ENGLISH

ON SCREEN LANGUAGE

ENGLISH

LANGUAGE

Item Contents

MENU LANGUAGE You can select the initial menu language of the DVD Video.

AUDIO LANGUAGE You can select the initial audio language of the DVD Video.

SUBTITLE You can select the initial subtitle language of the DVD Video.

ON SCREEN LANGUAGE You can select “ENGLISH,” “CHINESE,” or “SPANISH” as the on-screen language.

LANGUAGE menu

PICTURE menu

Item Contents

MONITOR TYPE You can select the monitor type to match your TV when you playback DVD Video discs recorded for

wide-screen televisions.

16:9 NORMAL/16:9 MULTI NORMAL (Wide television screen): Select this when the aspect ratio

of your wide TV is fixed to 16:9.

16:9 AUTO/16:9 MULTI AUTO (Wide television screen): Select this when your TV is an ordinary

wide TV.

4:3 LB/4:3 MULTI LB (Letter Box conversion): For a conventional (4:3) TV. Displays a

wide-screen picture to fit the width of the TV screen keeping the aspect ratio.

4:3 PS/4:3 MULTI PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed

in to fill the screen vertically and the left and right sides of the picture are cut off.

• For multi-color system TVs, select the [MULTI] option.

PICTURE SOURCE You can obtain optimal picture quality by selecting the source type of the disc contents.

AUTO: Normally, select this option. The System recognizes the picture type (film or video source) of

the current disc according to the disc information.

FILM: For a film source disc.

VIDEO: For a video source disc.

SCREEN SAVER You can set the screen saver function to ON or OFF. If no operation is done for about 5 minutes, the

display dims.

FILE TYPE You can select the file type to play.

AUDIO: To play MP3/WMA/WAV files.

STILL PICTURE: To play JPEG files.

VIDEO: To play MPEG-1/MPEG-2/ASF/DivX files.

16:9 4:3 LB

4:3 PS

UX-G68[U].book Page 35 Tuesday, December 5, 2006 4:03 PM

AUDIO menu

Item Contents

DIGITAL AUDIO OUTPUT Set this item correctly when using the OPTICAL DIGITAL OUT terminal on the rear.

PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals.

DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built-

in Dolby Digital decoder.

STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.

DOWN MIX This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is set to “PCM

ONLY.”

DOLBY SURROUND: Select this when connecting to a surround decoder.

STEREO: Select this when connecting to a stereo receiver, MD player, TV, etc.

D. RANGE COMPRESSION Set this item to listen to DVD Video recorded in Dolby Digital format at low or middle volume.

AUTO: You can enjoy powerful playback sound with full dynamic range.

ON: Select this when you want to fully apply the compression effect to make the sound at lower

volume clear (useful at midnight).

OTHERS menu

Item Contents

RESUME You can select Resume.

ON: The System resumes playback from the position where playback has been stopped if the disc is

still in the disc tray.

OFF: Resume is deactivated.

ON SCREEN GUIDE Activate or deactivate the on-screen guide.

DivX REGISTRATION The System has its own Registration Code.

If necessary, you can confirm it.

Once you have played back a disc in which the Registration Code is recorded, the System’s

Registration Code is overwritten for copyright protection.

UX-G68[U].book Page 36 Tuesday, December 5, 2006 4:03 PM

Additional Information

Learning More about This System

Connections (see pages 3 to 5)

• Make sure the antenna conductors do not touch any other

terminals, connecting cords or the power cord. Also, keep

the antennas away from metallic parts of the System,

connecting cords and the AC power cord. This could cause

poor reception.

• Use only speakers with the same speaker impedance as

indicated by the speaker terminals on the rear of the System.

• The speakers are magnetically shielded to avoid color

distortions on TVs. However, if not installed properly, it

may cause color distortions. So, pay attention to the

following when installing the speakers.

– When placing the speakers near a TV set, turn off the

TV’s main power switch or unplug it before installing the

speakers.

Then wait at least 30 minutes before turning on the TV’s

main power switch again.

– Some TVs may still be affected even though you have

followed the above instructions. If this happens, move

the speakers away from the TV.

Daily Operations—Playback (see pages 7 to 11)

Listening to the Radio:

• If you store a new station into an occupied preset number,

the previously stored station in that number will be erased.

• When you unplug the AC power cord or if a power failure

occurs, the preset stations will be erased in a few days. If

this happens, preset the stations again.

Playing Back a Disc/File:

• When you change the source to DVD/CD or USB

MEMORY, it may take a while to activate the source.

• The following functions cannot be used for the files in the

USB mass storage class device:

– Selecting the View Angle (page 17)

– Special Effect Playback (page 18)

– Program Play (page 19)

– A-B Repeat (page 21)

– Time Search (page 24)

• On some DVD, SVCD, or VCD discs, the actual operations

may be different from what is explained in this manual, due

to the programming and disc structure; such differences are

not a malfunction of this System.

• If you playback a DVD Video for more than 10 hours, “_”

appears instead of the hour digits.

• Some DVD Audio discs prohibit downmix. When you

playback such a disc, “LR ONLY” appears on the display

and the System plays back the left front and right front

signals.

• When playing back a DVD Audio disc recorded in MLP

(Meridian Lossless Packing; a lossless audio compression

system that can completely recreate the PCM signal), the

signals are recognized as the linear PCM signals, however,

no indicator lights up on the display.

• This System can recognize up to 4 000 tracks in a disc.

Also, the System can recognize up to 150 tracks per group

and up to 99 groups in a disc.

– If there are any unplayable files in a folder, those files are

also counted in the total file number.

– Playable files which do not belong to any groups are

handled as group 1.

• For playback of files in the USB mass storage class

device...

– While the System is reading a disc, changing the source

to USB MEMORY may cause the System to continue

playback the DVD/CD source. In this case, press 7 on

the main unit to reactivate the USB source.

– When connecting a USB mass storage class device, refer

also to its manual.

– Connect one USB mass storage class device to the

System at a time. Do not use a USB hub.

– You cannot charge any USB device through the USB

MEMORY jack of this System.

– While playing back a file in a USB mass storage class

device, do not disconnect the device. It may cause a

malfunction of both the System and the device.

– JVC bears no responsibility for any loss of data in the

USB mass storage class device while using this System.

– When connecting with a USB cable, use the cable whose

length is less than 1 m.

– This System is compatible with the USB Full-Speed (not

compatible with the USB 1.1).

– You can playback the following types of files in a USB

mass storage class device (maximum data transfer rate:

2 Mbps):

– Music: MP3, WMA, WAV

– Picture: JPEG

– Movie: MPEG-1, MPEG-2, ASF, DivX (maximum

frame rate of 30 fps for progressive)

– You cannot playback a file larger than 2 Gigabyte.

– When playing a file which has a large transfer rate,

frames or sounds may be dropped during playback.

– This System cannot recognize a USB mass storage class

device whose rating is other than 5 V and does not

exceed 500 mA.

– This System may not playback some USB mass storage

class devices and does not support DRM (Digital Rights

Management).

– This System may not playback some files even though

their formats are listed above.

– It will take some time to start up a Digital Audio Player

(DAP) larger than 1 Gigabyte.

• For DVD-VR playback...

– This System can play only a disc of UDF-Bridge format.

– For details about DVD-VR format and play list, refer to

the manual of the recording equipment.

– You cannot use reverse slow motion, Program Play, or

Random Play.

UX-G68[U].book Page 37 Tuesday, December 5, 2006 4:03 PM

• For MP3/WMA/WAV playback...

– MP3/WMA/WAV discs require a longer readout time

than regular CDs. (It depends on the complexity of the

group/file configuration.)

– Some MP3/WMA/WAV files cannot be played back and

will be skipped. This results from their recording

processes and conditions.

– This System can play only a disc of ISO 9660 Level 1 or

Level 2.

– This System can playback MP3/WMA/WAV files with

the extension code <.mp3>, <.wma>, or <.wav>

(regardless of the letter case—upper/lower).

– It is recommended that you make each MP3/WMA/

WAV file at a sampling rate of 44.1 kHz and at a bit rate

of 128 kbps. For WAV files: 44.1 kHz/16 bit. This

System cannot playback files made at a bit rate of less

than 64 kbps.

• For JPEG files playback...

– It is recommended that you record a file at 640 x 480

resolution. (If a file has been recorded at a resolution of

more than 640 x 480, it will take a long time to be

shown.)

– This System can play only baseline JPEG files*.

Progressive JPEG files* or lossless JPEG files* cannot

be played.

* Baseline JPEG format: Used for digital cameras,

web, etc.

Progressive JPEG format: Used for web.

Lossless JPEG format: An old type and rarely

used now.

– This System can playback JPEG files with the extension

code <.jpg> or <.jpeg> (regardless of the letter case—

upper/lower).

– This System may not playback JPEG files properly if

they are recorded from a device other than a digital

camera.

– During slide-show playback, zoom cannot be operated.

• For MPEG-1/MPEG-2 playback...

– The stream format should conform to MPEG system/

program stream.

– 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is

recommended for the highest resolution.

– This System also supports the resolutions of 352 x 576/

480 x 576/352 x 288 pixels (25 fps) and 352 x 480/480 x

480/352 x 240 pixels (30 fps).

– The file format should be MP@ML (Main Profile at

Main Level)/SP@ML (Simple profile at Main Level)/

MP@LL (Main Profile at Low Level).

– Audio streams should conform to Dolby Digital, MPEG1

Audio layer-2 or MPEG2 Audio Layer-2.

• For ASF playback...

– This System can playback ASF files with the extension

code <.asf> (regardless of the letter case—upper/lower).

– This System supports ASF files whose resolution is 352

x 288 pixels or less.

– Some recorded files may not be able to playback

depending on file characteristics, kind of digital camera/

video camera, or recording conditions.

– You cannot use the following functions—One Touch

Replay, Slow motion, A-B Repeat, Program Play and

Random Play.

• For DivX playback...

– This System can play only a disc of UDF-Bridge format.

“Multi-border” is not supported.

– The System supports all versions of DivX

video

(including DivX

6).

– The System supports DivX files whose resolution is 720

x 480 pixels or less (30 fps), and 720 x 576 pixels or less

(25 fps).

– Audio stream should conform to Dolby Digital, MPEG1

Audio Layer-2, or MPEG Audio Layer-3 (MP3).

– This System can playback DivX files with the extension

code <.divx> <.div> <.avi> (regardless of the letter

case—upper/lower).

– The System does not support GMC (Global Motion

Compression).

– The file encoded in the interlaced scanning mode may

not be played back correctly.

– You cannot use the following functions—One Touch

Replay, Slow motion, A-B Repeat, Program Play,

Random Play and on-screen operations.

Playing Back a Portable Audio Device:

• When QP Link fails due to a weak sound signal from the

AUX jack, Auto Standby may turn the System off even if

you can hear the sound from the speakers.

In such cases, adjust the volume level of the component

louder so that the System can detect the sound signal

properly.

• Changing from AUX to another source while QP Link

works will deactivate QP Link temporarily.

In this case, the following reactivates QP Link:

– Pressing QP LINK on the remote control twice.

– Unplug the component from the AUX jack, then plug it

in again.

• If you press

(Standby/on) to turn the System off or if

preset Timer turns the System off while QP Link works,

the System will deactivate QP Link temporarily.

In such cases, the following reactivates QP Link:

– When the sound signal from the AUX jack stops or is too

weak for about 30 seconds after the System is turned off.

– When you turn on the power again.

• QP Link may start working when you just plug in the

component to the AUX jack or unplug it. This is not a

malfunction.

UX-G68[U].book Page 38 Tuesday, December 5, 2006 4:03 PM

Daily Operations—Sound & Other Adjustments

(see pages 12 to 15)

Adjusting the Sound:

• This function also affects the sound through the headphones.

Changing the Scanning Mode:

• You cannot change the scanning mode to progressive in the

following cases:

– When your TV does not support the progressive video input.

– When you have not connected your TV to the system

using a component video cord.

Setting the Clock:

• “0:00” will flash on the display until you set the clock.

• The clock may gain or lose 1 to 2 minutes per month. If this

happens, reset the clock.

Unique DVD/VCD Operations (see pages 16 to 18)

Selecting the Audio Track:

• On some DVD Video discs, you cannot change audio

languages while playing back.

Special Effect Playback:

• During slow-motion playback, no sound will be reproduced.

• While zoomed in, the picture may look coarse.

Advanced Playback Operations (see pages 19

to 25)

Programming the Playing Order—Program Play:

• While programming steps...

Your entry will be ignored if you have tried to program an

item number that does not exist (for example, selecting

track 14 on a disc that only has 12 tracks).

Playing Repeatedly:

• A-B Repeat can be used within the same title while playing

a DVD Video, and within the same track for the other discs.

On-screen Bar Operations:

• For DVD-R/-RW in the VR format, “PG” or “PL” appears

instead of “TITLE” on the on-screen bar.

Audio/Video File Operations (see pages 26

and 27)

Operations on the Control Screen:

• If you press ON SCREEN on the remote control during

video file playback, playback information appears on the

TV screen.

• If you press ON SCREEN on the remote control during

audio file playback, “ ” will appear on the TV screen.

Advanced Tape Operations (see pages 28 and 29)

Recording on a Tape:

• The recording level is automatically set correctly. Thus,

you can adjust the sound you are actually listening to

without affecting the recording level.

• There is leader tape which cannot be recorded onto at the

start and end of cassette tapes. Thus, when recording CDs

or radio broadcasts, wind the leader tape first to ensure that

the recording will be made without any music part lost.

• If you start recording with no cassette inserted, “NO REC”

appears on the display. If a protected tape has been

inserted, “NO REC” appears.

• You cannot open or close the disc tray while recording a

disc.

Synchronized Recording:

• Synchronized recording does not function on the file

format of MPEG-1, MPEG-2, ASF, and DivX.

Enjoying Karaoke (see pages 30 to 32) (Not

available in the Australian model)

Singing Along (Karaoke):

• Karaoke mode setting (Key Control and Vocal Masking)

can be used when selecting “DVD/CD” or “USB

MEMORY” as the source, except for DVD-VR/DVD

Audio/MPEG-1/MPEG-2/ASF/DivX files.

Even if the source is “DVD/CD” or “USB MEMORY,”

Karaoke mode setting cannot be used while “NO DISC” or

“NO DEVICE” appears on the display.

• Karaoke mode setting is automatically canceled when the

source is changed.

• When selecting “DVD/CD” or “USB MEMORY” as the

source, the microphone is not available while playback is

stopped or paused. To use the microphone, activate Key

Control or Vocal Masking.

• Karaoke mode setting is also applied to the optical digital

output signals.

• When Vocal Masking is activated, 3D Phonic will be

canceled temporarily.

• On some music discs, Vocal Masking does not provide the

correct effect.

• You can also use the microphone when selecting “FM,”

“AM,” or “AUX” as the source. When selecting “TAPE”

as the source, you can use the microphone only during tape

playback.

Timer Operations (see pages 33 and 34)

Setting the Timer:

• If you do not specify the preset station or track number

correctly while setting a timer, the currently selected

station or the first track will be played when the timer is

activated.

• When you unplug the AC power cord or if a power failure

occurs, the timer will be canceled. You need to set the

clock first, then the timer again.

• If you set DVD Video as the source, Daily Timer will not

work correctly.

Timer Priority:

• If you set the Sleep Timer after Daily Timer starts playing

the selected source, Daily Timer is canceled.

UX-G68[U].book Page 39 Tuesday, December 5, 2006 4:03 PM

Setup Menu Operations (see pages 35 and 36)

General:

• If the upper and lower parts of the menu are cut off, adjust

the picture size control of the TV.

LANGUAGE menu:

• When the language you have selected for MENU

LANGUAGE, AUDIO LANGUAGE, or SUBTITLE is

not recorded on a disc, the original language is used as the

initial language.

PICTURE menu—MONITOR TYPE:

• Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size

may become 4:3 letter box while playing a disc. This

depends on how the discs are recorded.

• When you select “16:9 NORMAL/16:9 MULTI

NORMAL” or “16:9 AUTO/16:9 MULTI AUTO” for a

picture whose aspect ratio is 4:3, the picture slightly

changes due to the process for converting the picture width.

OTHERS menu—ON SCREEN GUIDE:

• The setup menu and on-screen bar will be displayed (and

recorded) even though this function is set to “OFF.”

Subtitles and the information for zoom-in always appear on

the display regardless of this setting.

Maintenance

To get the best performance of the System, keep your discs,

tapes and mechanism clean.

Handling discs

• Remove the disc from its case by holding it at the edge

while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

• Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when

placing it back in its case.

• Avoid exposure to direct sunlight, extreme temperature,

and moisture.

To clean the disc:

Wipe the disc with a soft cloth in a straight line from center

to edge.

Handling cassette tapes

• If the tape is loose in its cassette, take up the slack by inserting

a pencil in one of the reels and rotate it.

– If the tape is loose, it may get stretched, cut, or caught in the

cassette.

• Be careful not to touch the tape surface.

• Avoid the following places to store the tape—in dusty places,

in direct sunlight or heat, in moist areas, on a TV or speaker,

or near a magnet.

To keep the best recording and playback sound quality:

• Use a cotton swab moistened with alcohol to clean the heads,

capstans, and pinch rollers.

• Use a head demagnetizer (available at electronics and audio

shops) to demagnetize the heads (when the System turned off).

Cleaning the System

• Stains should be wiped off with a soft cloth. If the System

is heavily stained, wipe it with a cloth soaked in water-

diluted neutral detergent and wrung well, then wipe clean

with a dry cloth.

• Since the System may deteriorate in quality, become

damaged or get its paint peeled off, be careful about the

following:

– DO NOT wipe it with a hard cloth.

– DO NOT wipe it forcefully.

– DO NOT wipe it with thinner or benzine.

– DO NOT apply any volatile substance such as

insecticides to it.

– DO NOT allow any rubber or plastic to remain in contact

for a long time.

To remove the speaker grilles:

Holes

Speaker

grille

Projection

AdditonalInfo.fm Page 40 Friday, January 26, 2007 11:30 AM

Troubleshooting

General:

Adjustments or settings are suddenly canceled before

you finish.

sThere is a time limit. Repeat procedure again.

Operations are disabled.

sThe built-in microprocessor may malfunction due to

external electrical interference. Unplug the AC power

cord and then plug it back in.

Unable to operate the System from the remote control.

sThe path between the remote control and the remote

sensor on the System is blocked.

sThe batteries are exhausted.

No sound is heard.

sSpeaker connections are incorrect or loose.

sHeadphones are connected.

No picture appears on the screen.

sThe video cord connections are incorrect or loose.

No picture is displayed on the TV screen, the picture is

blurred, or the picture is divided into two parts.

sThe System is connected to a TV which does not support

progressive video input.

The left and right edges of the picture are missing on the

screen.

sSelect “4:3 LB” for “MONITOR TYPE” (see page 35).

Radio Operations:

Hard to hear broadcasts because of noise.

sAntennas connections are incorrect or loose.

sThe AM loop antenna is too close to the System.

The FM antenna is not properly extended and positioned.

Disc/File Playback Operations:

The disc does not play.

sYou have inserted a disc whose Region Code is not

correct. (“RG ERROR” appears on the display.)

sThe disc is placed upside down. Place the disc with the

label side up.

ID3 Tag on an MP3/WMA/WAV file cannot be shown.

There are two types of ID3 Tag—Version 1 and Version 2.

This System can only show ID3 Tag Version 1.

Groups and tracks are not played back as you expect.

sThe playing order is determined when the groups and

tracks were recorded. It depends on the writing

application.

MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2, ASF or

DivX files are not played back.

sThe disc or the USB mass storage class device may

include different types of tracks (ex. MP3/WMA/WAV

files and JPEG files). In this case, you can only playback

the files selected by the “FILE TYPE” setting (see

page 35).

sYou have changed the “FILE TYPE” setting after the

System read the disc or the USB mass storage class

device. In this case, reload the disc or disconnect the

USB mass storage class device and connect it again.

“NO AUDIO” appears.

sThis System cannot playback illegally produced DVD

Audio discs.

“LR ONLY” appears.

sSome DVD Audio discs prohibit downmixed output.

When you playback such a disc, this System plays back

the left front and right front signals only.

The disc sound is discontinuous.

sThe disc is scratched or dirty.

No subtitle appears on the display though you have

selected the initial subtitle language.

sSome DVDs are programmed to always display no

subtitle initially. If this happens, press SUBTITLE after

starting playback (see page 17).

Audio language is different from the one you have

selected as the initial audio language.

sSome DVDs are programmed to always use the original

language initially. If this happens, press AUDIO/MPX

after starting playback (see page 16).

The disc tray does not open or close.

sThe AC power cord is not plugged in.

sChild Lock is in use. “LOCKED” appears in the display

window (see page 21).

Tape Operations:

The cassette holder cannot be opened.

sPower supply from the AC power cord has been cut off

while the tape was running. Turn on the System.

QP Link Operations:

The System automatically turns on even if the Timer

turn the System to standby or if you turn the System to

standby while playback is going on the portable audio

device.

s In this case, deactivate QP Link or stop playback on the

device connected to the AUX jack.

Recordings:

Impossible to record.

sSmall tabs on the back of the cassette are removed.

Cover the holes with adhesive tape.

Timer Operations:

Daily Timer does not work.

sThe System has been turned on when the on-time comes.

Timer starts working only when the System is turned off.

Daily Timer does not start playback.

sThe disc loaded is a DVD Video. Change the disc.

sTitle/group number and chapter/track number are not

entered while setting the Daily Timer. Do not skip these

steps when you want to play a disc using Daily Timer.

UX-G68[U].book Page 41 Tuesday, December 5, 2006 4:03 PM

Language Code List

AA Afar

AB Abkhazian

AF Afrikaans

AM Ameharic

AR Arabic

AS Assamese

AY Aymara

AZ Azerbaijani

BA Bashkir

BE Byelorussian

BG Bulgarian

BH Bihari

BI Bislama

BN Bengali, Bangla

BO Tibetan

BR Breton

CA Catalan

CO Corsican

CS Czech

CY Welsh

DA Danish

DZ Bhutani

EL Greek

EO Esperanto

ET Estonian

EU Basque

FA Persian

FI Finnish

FJ Fiji

FO Faroese

FY Frisian

GA Irish

GD Scots Gaelic

GL Galician

GN Guarani

GU Gujarati

HA Hausa

HI Hindi

HR Croatian

HU Hungarian

HY Armenian

IA Interlingua

IE Interlingue

IK Inupiak

IN Indonesian

IS Icelandic

IW Hebrew

JI Yiddish

JW Javanese

KA Georgian

KK Kazakh

KL Greenlandic

KM Cambodian

KN Kannada

KO Korean (KOR)

KS Kashmiri

KU Kurdish

KY Kirghiz

LA Latin

LN Lingala

LO Laothian

LT Lithuanian

LV Latvian, Lettish

MG Malagasy

MI Maori

MK Macedonian

ML Malayalam

MN Mongolian

MO Moldavian

MR Marathi

MS Malay (MAY)

MT Maltese

MY Burmese

NA Nauru

NE Nepali

NL Dutch

NO Norwegian

OC Occitan

OM (Afan) Oromo

OR Oriya

PA Panjabi

PL Polish

PS Pashto, Pushto

PT Portuguese

QU Quechua

RM Rhaeto-Romance

RN Kirundi

RO Rumanian

RW Kinyarwanda

SA Sanskrit

SD Sindhi

SG Sangho

SH Serbo-Croatian

SI Singhalese

SK Slovak

SL Slovenian

SM Samoan

SN Shona

SO Somali

SQ Albanian

SR Serbian

SS Siswati

ST Sesotho

SU Sundanese

SV Swedish

SW Swahili

TA Tamil

TE Telugu

TG Tajik

TH Thai

TI Tigrinya

TK Turkmen

TL Tagalog

TN Setswana

TO Tonga

TR Turkish

TS Tsonga

TT Tatar

TW Twi

UK Ukrainian

UR Urdu

UZ Uzbek

VI Vietnamese

VO Volapuk

WO Wolof

XH Xhosa

YO Yoruba

ZU Zulu

UX-G68[U].book Page 42 Tuesday, December 5, 2006 4:03 PM

OPTICAL DIGITAL OUT Signals

* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL DIGITAL

OUT terminal if the discs are not copy-protected.

Operating JVC’s TVs Using the Remote Control

You can use the remote control to operate JVC’s TVs.

While holding SHIFT, press...

DIGITAL AUDIO

OUTPUT

Output Signals

Playback disc/file STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY

DVD Video

with 48 kHz, 16/20/24 bit Linear PCM

48 kHz, 16 bit Linear PCM*

with 96 kHz, Linear PCM 48 kHz, 16 bit Linear PCM

with Dolby Digital Dolby Digital bitstream 48 kHz, 16 bit Linear PCM

with DTS DTS bitstream 48 kHz, 16 bit Linear PCM

DVD Audio

with 48/96/192 kHz, 16/20/24 bit

Linear PCM

48 kHz, 16 bit Linear PCM

with 44.1/88.2/176.4 kHz,

16/20/24 bit Linear PCM

44.1 kHz, 16 bit Linear PCM

with Dolby Digital Dolby Digital bitstream 48 kHz, 16 bit Linear PCM

with DTS DTS bitstream 48 kHz, 16 bit Linear PCM

DVD-R/-RW/-ROM in DVD-VR format

with 48 kHz, 16/20/24 bit Linear PCM

48 kHz, 16 bit Linear PCM*

with Dolby Digital Dolby Digital bitstream 48 kHz, 16 bit Linear PCM

SVCD, VCD, CD 44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM

CD with DTS DTS bitstream 44.1 kHz, 16 bit Linear PCM

MP3/WMA/WAV/MPEG-1/

MPEG-2 disc/file

32/44.1/48 kHz, 16 bit Linear PCM

DivX disc/file

with MP2, MP3

32/44.1/48 kHz, 16 bit Linear PCM

with Dolby Digital

Dolby Digital bitstream

32/44.1/48 kHz,

16 bit Linear PCM

ASF disc/file 32 kHz, 16 bit Linear PCM

TV/VIDEO

SHIFT

TV VOL

+,–

TV CH ,

Remote control

TV Turn on/off TV.

TV/VIDEO Change the input mode.

TV VOL

+,– Adjust the volume.

TV CH , Change the channels.

UX-G68[U].book Page 43 Tuesday, December 5, 2006 4:03 PM

Specifications

Amplifier section—CA-UXG68

Output Power:

120 W (60 W + 60 W) at 6 Ω (10% THD)

Audio Input AUX: 500 mV/50 kΩ (at “AUX LVL1”)

250 mV/50 kΩ (at “AUX LVL2”)

125 mV/50 kΩ (at “AUX LVL3”)

Digital output: OPTICAL DIGITAL OUT:

–21 dBm to –15 dBm (660 nm ±30 nm)

Digital input: USB MEMORY

Video Out:

Color system: NTSC or PAL (interlaced/progressive)

VIDEO (composite): 1 V(p-p)/75 Ω

S-VIDEO: Y (luminance) 1 V(p-p)/75 Ω

C (chrominance, burst)

NTSC 0.286 V(p-p)/75 Ω

PAL 0.3 V(p-p)/75 Ω

COMPONENT: (Y) 1 V(p-p)/75 Ω

B/PR) 0.7 V(p-p)/75 Ω

Speaker impedance: 6 Ω – 16 Ω

Tuner section

FM tuning range: 87.50 MHz – 108.00 MHz

AM (MW) tuning range:

531 kHz – 1 710 kHz (at 9 kHz intervals)

530 kHz – 1 710 kHz (at 10 kHz intervals)

For Saudi Arabia only:

531 kHz – 1 602 kHz (at 9 kHz intervals)

530 kHz – 1 600 kHz (at 10 kHz intervals)

Tape section

Frequency response: 60 Hz – 14 000 Hz

Wow and flutter: 0.15 % (WRMS)

Disc/file player section

Region codes:

Middle East: 2

South East Asia: 3

Central and South America, Australia: 4

Playable disc:

DVD Video/DVD Audio/CD/VCD/SVCD/

CD-R/CD-RW (CD/SVCD/VCD/MP3/

WMA/WAV/JPEG/MPEG-1/MPEG-2/ASF/

DivX format)

DVD-R/-RW (DVD-VR/DVD Video/MP3/

WMA/WAV/JPEG/MPEG-1/MPEG-2/ASF/

DivX format)

+R/+RW (DVD Video/MP3/WMA/WAV/

JPEG/MPEG-1/MPEG-2/ASF/DivX format)

DVD-ROM (MP3/WMA/WAV/JPEG/

MPEG-1/MPEG-2/ASF/DivX format)

Playable file:

MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/

ASF/DivX format

Dynamic range: 80 dB

Horizontal resolution: 500 lines

Wow and flutter: Immeasurable

General

Power requirement:

AC 110 V/AC 127V/AC 220 V/AC 230 V-240V

(adjustable with the voltage selector), 50 Hz/60 Hz

For Oceanian countries: AC 240 V , 50 Hz

Power consumption: 125 W (at operation)

14 W (at standby)

3.5 W (at standby dimmer OFF mode)

Dimensions (approx.): 170 mm x 250 mm x 342 mm

(W/H/D)

Mass (approx.): 5.7 kg

Speaker section—SP-UXG68

Speaker units: Tweeter: 1.5 cm dome x 1

Squawker: 4 cm cone x 1

Woofer: 13.5 cm cone x 1

Impedance: 6 Ω

Dimensions (approx.): 166 mm x 250 mm x 232 mm

(W/H/D)

Mass (approx.): 2.8 kg each

Supplied Accessories

See page 3.

Design and specifications are subject to change without notice.

• Manufactured under license from Dolby Laboratories. “Dolby”,

“Pro Logic”, “MLP lossless”, and the double-D symbol are

trademarks of Dolby Laboratories.

• “DTS” is a registered trademark of DTS, Inc. and

“DTS2.0+Digital Out” is a trademark of DTS, Inc.

• “Official DivX

Certified product” “Plays all versions of DivX

video (including DivX

6) with standard playback of DivX

media files” “DivX, DivX certified, and associated logos are

trademarks of DivX, Inc. and are used under licence.”

• “Official DivX

Ultra Certified product” “Plays all versions of

DivX

video (including DivX

6) with enhanced playback of

DivX

media files and the DivX

Media Format” “DivX, DivX

Ultra Certified, and associated logos are trademarks of DivX, Inc.

and are used under licence.”

• Microsoft and Windows Media are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or

other countries.

• USE OF THIS PRODUCT IN ANY MANNER THAT

COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS

PROHIBITED, EXCEPT FOR USE BY A CONSUMER

ENGAGING IN PERSONAL AND NON-COMMERCIAL

ACTIVITIES.

• This product incorporates copyright protection technology that is

protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE

WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE

DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625

PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS

RECOMMENDED THAT THE USER SWITCH THE

CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.

IF THERE ARE QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD

PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE

CENTER.”

UX-G68[U].book Page 44 Tuesday, December 5, 2006 4:03 PM

Parts Index

Remote control

Main unit

Button Page

AUDIO

, ENTER/SET

(One-Touch Replay)

3D PHONIC

AHB PRO

;

ANGLE

AUDIO/MPX

AUDIO VOL + , –

A.STANDBY

BASS/TREBLE

C.VOICE

CANCEL

CLOCK/TIMER

DIMMER

DISPLAY

DVD/AUX LEVEL

DVD/CD

ECHO

FADE MUTING

FM/PLAY MODE

FM/AM/AUX

GROUP/TITLE

GROUP/TITLE SKIP

KARAOKE

KEY

MENU/PL

Number buttons

ON SCREEN

PAGE

QP LINK

;

REPEAT

REPEAT A-B

RESERVE

RETURN

SCAN MODE

SET UP

SHIFT

SLEEP

SLOW

(

SOUND TURBO II

SUBTITLE

TAPE

TOP MENU/PG

TV CH

(

TV VOL + , –

TV/VIDEO

USB MEMORY

VFP

ZOOM

Button Page

& STANDBY lamp

3D PHONIC/HP SURROUND

AUX jack

Cassette holder

Display

DISPLAY

DVD/CD

FM/AM/AUX

MIC jack

MIC VOLUME

PHONES

REC

Remote sensor

SOUND TURBO II

TAPE

,,,

UP, DOWN

USB MEMORY jack

(

USB MEMORY

VOLUME + , –

Remote control

Main unit

10 0

;

This remote control can also operate JVC’s TVs

(see page 43).

* Not on the Australian model.

UX-G68[U].book Page 45 Tuesday, December 5, 2006 4:03 PM

0207WMKMDCJEM

UX-G68 MICRO COMPONENT SYSTEM

Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada,

Australia, and U.K.)

CAUTION for mains (AC) line

BEFORE PLUGGING IN, do check

that your mains (AC) line voltage

corresponds with the position of the

voltage selector switch provided on

the outside of this equipment and, if

different, reset the voltage selector

switch, to prevent from a damage or

risk of fire/electric shock.

Cover[U].fm Page 2 Friday, January 26, 2007 11:35 AM

JVC SP-UXG68 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van JVC SP-UXG68

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info