56263

JVC SP-FSY1 Handleiding

83
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
FS-Y1—Consists of CA-FSY1 and SP-FSY1
—Composé CA-FSY1 et SP-FSY1
INSTRUCTIONS
Français English
GVT0142-002A
[C]
MANUEL D’INSTRUCTIONS
COMPACT COMPONENT SYSTEM
SYSTEME DE COMPOSANTS COMPACT
FS-Y1[C].book Page 1 Wednesday, February 16, 2005 7:46 AM
G-1
IMPORTANT FOR LASER PRODUCTS
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
ATTENTION
Afin d’éviter tout risque d’électrocution, d’incendie,
etc.:
1. Ne pas enlever les vis ni les panneaux et ne pas
ouvrir le coffret de l’appareil.
2. Ne pas exposer l’appareil à la pluie ni à l’humidité.
CAUTION — STANDBY/ON button!
Disconnect the mains plug to shut the power off
completely (the STANDBY lamp goes off).
The STANDBY/ON
button in any position does
not disconnect the mains line.
• When the system is on standby, the STANDBY
lamp lights red.
• When the system is turned on, the STANDBY
lamp lights green.
The power can be remote controlled.
Attention––Touche
STANDBY/ON
(attente/sous tension)!
Déconnectez la fiche secteur pour mettre l’appareil
complètement hors tension (tous les témoins et
toutes les indications s’éteignent). La touche
STANDBY/ON
dans n’importe quelle position
ne déconnecte pas l’appareil du secteur.
• Quand l’appareil est en mode d’attente, le témoin
STANDBY/ON est allumé en rouge.
• Quand l’appareil est sous tension, le témoin
STANDBY/ON est allumé en vert.
L’alimentation ne peut pas être commandée à
distance.
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are
no user serviceable parts inside the unit; leave all
servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation
when open and interlock failed or defeated. Avoid
direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE THE UNIT.
1. PRODUIT LASER CLASSE 1
2. ATTENTION: N’ouvrez pas le couvercle
supérieur. Il n’y a aucune pièce réparable par
l’utilisateur à l’intérieur de l’appareil; confiez toute
réparation à un personnel qualifié.
3. ATTENTION: Risque de radiations laser visible et
invisible quand l’appareil est ouvert ou que le
systéme de verrouillage ne fonctionne pas ou a
été mis hors service. Évitez toute exposition
directe au rayon.
4. REPRODUCTION DE L’ÉTIQUETTE:
ÉTIQUETTE DE PRÉCAUTION PLACÉE
L’INTERIEUR DE L’APPAREIL
Warnings, cautions and others/
Mises en garde, précautions et indications diverses
FS-Y1[C].book Page 1 Wednesday, February 16, 2005 7:46 AM
G-2
FS-Y1[C].book Page 2 Wednesday, February 16, 2005 7:46 AM
G-3
For Canada/pour le Canada
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS
ELECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQUAU FOND.
For Canada/pour le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED
THE CLASS B LIMITS FOR RADIO NOISE
EMISSIONS FROM DIGITAL APPARATUS AS SET
OUT IN THE INTERFERENCE-CAUSING
EQUIPMENT STANDARD ENTITLED “DIGITAL
APPARATUS”, ICES-003 OF THE DEPARTMENT OF
COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES
LIMITES DE BRUITS RADIOELECTRIQUES
APPLICABLES AUX APPAREILS NUMIRIQUES DE
CLASSE B PRESCRITES DANS LA NORME SUR LE
MATERIEL BROUILLEUR: “APPAREILS
NUMERIQUES”, NMB-003 EDICTEE PAR LE
MINISTRE DES COMMUNICATIONS.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Section 820-40 of the NEC
which provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
FS-Y1[C].book Page 3 Wednesday, February 16, 2005 7:46 AM
1
Introduction
English
Introduction
About discs......................................................3
Description of parts .........................................5
Getting started
Using the remote control .................................6
Putting the batteries in the remote control.......... 6
Operating the TV using the remote control......... 7
Connecting up .................................................8
Basic operations
Playing discs .................................................12
Playback ........................................................... 12
To switch the display ........................................ 13
Select what you want to play by using
the number buttons.................................... 14
To stop playback............................................... 14
To pause playback............................................ 14
To advance picture frame-by-frame.................. 14
Fast reverse/Fast forward search..................... 14
Playing back from a position 10 seconds
before (One Touch Replay)....................... 15
Slow Motion Playback....................................... 15
Skip to the beginning of the selection............... 15
To change the brightness of
the display window (DIMMER) .................. 16
Adjusting the volume ........................................ 16
Adjusting sound quality..................................... 16
Turning off the sound temporarily (MUTING) ... 16
Advanced operations
Playing audio/video files................................16
Resume Playback .........................................18
Select the scene to be played .......................19
Program Playback/Random Playback...........20
Repeat Playback ...........................................22
Other convenient functions............................24
Selecting the subtitles....................................... 24
Selecting the audio language ........................... 24
Selecting a view angle...................................... 24
Enlarging the picture (ZOOM)........................... 25
Adjusting the picture quality (VFP) ................... 25
Creating realistic sound (3D PHONIC) ............. 26
Adjusting playback level (DVD LEVEL) ............ 26
Enjoying better pictures (SCAN MODE)........... 26
Functions specific to DVD AUDIO.................27
Playing the Bonus Group...................................27
Browsable Still Pictures (B.S.P.) .......................27
Using the menu bar.......................................28
Preferences...................................................29
Country/Area codes.......................................31
Listening to radio
Listening to a radio broadcast .......................32
Tuning in to a preset station..........................33
Convenient functions
Listening to the sound of other audio device
....34
Setting the Various Timer..............................34
Setting the built-in clock.....................................34
Setting the daily timer........................................34
Auto Standby.....................................................35
Sleep Timer .......................................................36
Tray Lock.......................................................36
Reference
Troubleshooting.............................................37
Language codes............................................38
Specifications ................................................39
How to read this manual
• Operations are described by mainly using the
remote control buttons. If there are the same
marks on the main unit, the buttons on the main
unit can also be used.
• The following marks tell you for which type of the
discs the operation can be made.
• The illustrations and TV screens may be different
between the actual case and the description.
• “VCD” is an abbreviation of “Video CD”.
• “SVCD” is an abbreviation of “Super Video CD”.
Table of contents
FS-Y1[C].book Page 1 Wednesday, February 16, 2005 7:46 AM
2
English
7 Important cautions
Installation of the system
• Select a place which is level, dry and neither too hot
nor too cold; between 5°C and 35°C.
• Leave sufficient distance between the system and the
TV.
• Do not use the system in a place subject to vibration.
Power cord
• Do not handle the power cord with wet hands.
• A small amount of power is always consumed while
the power cord is connected to the wall outlet.
• When unplugging the power cord from the wall outlet,
always pull on the plug, not the power cord.
To prevent malfunctions of the system
• There are no user-serviceable parts inside. If anything
goes wrong, unplug the power cord and consult your
dealer.
• Do not insert any metallic object into the system.
• Do not use any non-standard shape disc (like a heart,
flower or credit card, etc.) available on the market,
because it may damage the system.
• Do not use a disc with tape, stickers, or paste on it,
because it may damage the system.
Note about copyright laws
Check the copyright laws in your country before
recording from DVDs, VCDs, SVCDs, and CDs.
Recording of copyrighted material may infringe copyright
laws.
Note about copy guard system
DVDs are protected by copy guard system. When you
connect the system to your VCR directly, the copy guard
system activates and the picture may not be played back
correctly.
7 Safety precautions
Avoid moisture, water and dust
Do not place the system in moist or dusty places.
Avoid high temperatures
Do not expose the system to direct sunlight and do not
place it near a heating device.
When you are away
When away on travel or for other reasons for an extended
period of time, disconnect the power cord plug from the
wall outlet.
Do not block the vents
Blocking the vents may damage the system.
Care of the cabinet
When cleaning the system, use a soft cloth and follow the
relevant instructions on the use of chemically-coated
cloths. Do not use benzene, thinner or other organic
solvents including disinfectants. These may cause
deformation or discoloring.
If water gets inside the system
Turn the system off and disconnect the power cord plug
from the wall outlet, then call the store where you made
your purchase. Using the system in this condition may
cause fire or electrical shock.
7 When condensation or water drops adhere to the
lens
In any of the following cases, condensation or water
drops may adhere to the lens to prevent the system from
working properly:
• Immediately after starting to heat the room
• When the system is installed in a steamy or damp
space
• When the system is suddenly moved from a cold place
to a warm space
In any of these cases, leave the system turned on for 1 or
2 hours before use.
Check to be sure you have all of the supplied
accessories.
The number in parentheses is the quantity of the pieces
supplied. If anything is missing, contact your dealer
immediately.
• Remote control (1)
• Batteries (2)
• FM antenna (1)
• AM loop antenna (1)
• Power cord (1)
• Composite video cord (1)
• Speaker cords (2)
Notes on handling
Paste
Sticker
Label sticker
Supplied accessories
Special cautions
• Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “MLP Lossless”, and the double-D
symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS 2.0+DIGITAL OUT” are registered trademarks of Digital Theater Systems, Inc.
• This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
FS-Y1[C].book Page 2 Wednesday, February 16, 2005 7:46 AM
3
Introduction
English
About discs
This system has been designed to play back the following
discs:
DVD VIDEO, DVD AUDIO, VCD, SVCD, CD
This system can also play back the following discs:
• Finalized DVD-R/-RW discs recorded in the DVD
VIDEO format.
• CD-R/RW discs recorded in the following formats
• Music CDs (finalized discs)
• VCDs
• SVCDs
• MP3/WMA/JPEG discs recorded in ISO 9660 (for
details, refer to “Notes on CD-R and CD-RW ”)
However, some discs may not be played back because of
their disc characteristics, recording conditions, or
damage or stain on them.
Only sounds can be played back from the following discs:
MIX-MODE CD CD-G
CD-EXTRA CD TEXT
Discs you can play:
is a trademark of DVD Format/Logo
licensing Corporation.
* Note on Region Code
DVD players and DVD VIDEOs have their own Region
Code numbers. This system can only play back a DVD
VIDEO recorded with the Region Code number and
video format mentioned below.
For your available Region Code, check the rear panel
of your main unit.
If a DVD VIDEO with an improper Region Code
number is loaded, “REGION CODE ERROR!” appears
on the TV screen and playback cannot start.
• On some DVD VIDEOs, DVD AUDIOs, VCDs or SVCDs,
their actual operation may be different from what is
explained in this manual. This is due to the disc
programming and disc structure, not a malfunction of
this system.
Notes on DVD-R, DVD-RW
• This system can also play finalized DVD-Rs or DVD-
RWs recorded in DVD-Video format.
Notes on CD-R and CD-RW
• This system can also play CD-Rs or CD-RWs if MP3,
WMA, and JPEG files are recorded on them with ISO
9660 format.
• This system supports “multi-session” discs (up to 20
sessions).
• This system cannot play “packet write” (UDF format)
discs. Some discs may not be played back because of
their disc characteristics, recording conditions, or
damage or stain on them.
Discs that cannot be played back
• The following discs cannot be played back:
DVD-ROM, DVD-RAM, DVD-R/-RW (recorded in VR
format), CD-ROM, CD-I (CD-I Ready), Photo CD,
SACD, etc.
Playing back these discs will generate noise and
damage the speakers.
Damaged discs and discs in an extraordinary shape
(other than a disc of 12 cm or 8 cm in diameter) cannot
be played back.
Caution for DualDisc playback:
The non-DVD side of a “DualDisc” does not comply
with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc
on this product may not be recommended.
Playable disc types
Disc
Type
Mark (Logo)
Video
Format
DVD
VIDEO
NTSC
DVD
AUDIO
—
VCD NTSC
SVCD NTSC
CD —
CD-R —
CD-RW —
AUDIO
Examples:
FS-Y1[C].book Page 3 Wednesday, February 16, 2005 7:46 AM
4
English
Notes on all files
• The system can only recognize and play files with one
of the following extensions, which can be in any
combination of upper and lower case;
• MP3: “.MP3”, “.mp3”
• WMA: “.WMA” , “.wma”
• JPEG: “.JPG”, “.JPEG”, “.jpg”, “.jpeg”
• If a character other than single byte English characters
is used in the file name of an MP3/WMA/JPEG file, the
track/file name will not be displayed correctly.
• The system recognizes up to 150 tracks (files) per
group, 99 groups per disc, and the total number of the
tracks (files) that the system can play is 1 000.
• Some files may not be played back normally because
of their disc characteristics or recording conditions.
For MP3/WMA files
• An off-the-shelf MP3 disc may be played in an order
different from that indicated on the label attached to
the disc.
• The system supports MP3/WMA files recorded with a
bit rate of 32 – 320 kbps and a sampling frequency of
16 kHz, 22.05 kHz, 24 kHz (WMA only), 32 kHz,
44.1 kHz, or 48 kHz.
• If the tag information (album name, artist, and track
title, etc.) is recorded on a disc, it appears in the file
control display on the TV screen.
• We recommend to record each piece of material
(song) at a sample rate of 44.1 kHz and at a data
transfer rate of 128 (96 for WMA only) kbps.
• This system cannot play back files encoded with
Multiple Bit Rate (MBR). (MBR is a format to encode a
file content at several different bit rates.)
For JPEG files
• We recommend to record a file at 640 x 480 resolution.
• This system can play a baseline JPEG file, excluding
monochromatic JPEG files.
• This system can play JPEG data taken with a digital
camera conforming to the DCF (Design Rule for
Camera File System) standard (when a function is
applied such as the automatic rotation function of a
digital camera, data goes beyond the DCF standard,
so the image may not be displayed).
• If data has been processed, edited and restored with
PC image editing software, the data may not be
displayed.
• This system cannot play animations such as MOTION
JPEG, or still images (TIFF etc.) other than JPEG, and
image data with sound.
• An image with a resolution of more than 8 192 x 7 680
pixels cannot be displayed.
DVD VIDEO
A DVD VIDEO consists of “titles” and each title
may be divided into “chapters”.
DVD AUDIO
A DVD AUDIO consists of “groups” and each group
may be divided into “tracks”.
Some discs include a “bonus group” that requires a
password for playing (page 27).
VCD/SVCD/CD
VCD, SVCD and CD consist of “tracks”.
In general, each track has its own track number.
(On some discs, each track may also be further
divided by indexes.)
MP3/WMA [JPEG] discs
On an MP3/WMA [JPEG] disc, each still picture
(material) is recorded as a track [file]. Tracks [Files]
are usually grouped into a folder. Folders can also
include other folders, creating hierarchical folder
layers.
This unit simplifies the hierarchical construction of
a disc and manages folders by “groups”.
This product can recognize up to 1 000 tracks
[files] in a disc. Also, the product can recognize up
to 150 tracks [files] per group and up to 99 groups
in a disc. Since the unit ignores the tracks [files]
whose numbers are exceeding 150 and the groups
whose numbers are exceeding 99, they cannot be
played back.
• If there is any type of files other than MP3/WMA
[JPEG] files in a folder, those files are also
counted in the total file number.
Disc structure
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Group 1 Group 2
Track 1 Track 2 Track 3 Track 1 Track 2
Track 1 Track 2 Track 3 Track 4 Track 5
Group 1 Group 2
Track 1
[File 1]
Track 2
[File 2]
Group 3 Group 4 Group 5
About discs (continued)
FS-Y1[C].book Page 4 Wednesday, February 16, 2005 7:46 AM
5
Introduction
English
The numbers represent the page numbers.
* Connect headphones (not supplied) with a stereo mini plug. If the headphones are connected, the
speakers and subwoofer will not produce any sound.
Front panel
PHONES
PLAY
MULTI CONTROL UPDOWN
DIMMER 3D PHONICBASS/TREBLE
A M A U XF M
PAUSE
16
12
11
16
16
26
34
15
14
32
15
14
12
12
12
See “Display
window” below.
In the door
Top of the unit
Display window
RESUME
PRGM. ALL SLEEP 3D PHONICA. STANDBYA-B 12 31RANDOM
BONUS B.S.P. ST AUTOPROGRESSIVESVCDVD-A
13
20
21 17, 22 35 36 35 32 26
18 26 27 27 13
Rear panel
SPEAKER IMPEDANCE
4Ω -16Ω
VIDEO
S-VIDEO
COMPONENT
YP
B
P
R
VIDEO OUT
AM
EXT
RL
R
L
AM
LOOP
PCM/
STREAM
FM75
Ω
COAXIAL
ANTENNA
AUX
DVD OPTICAL
DIGITAL OUT
SUB-
WOOFER
OUT
SPEAKERS
CAUTION:
9
11
11
11
8
10
8
10
10
11
These holes discharge heat
generated inside the unit.
Do not cover up these holes.
Description of parts
FS-Y1[C].book Page 5 Wednesday, February 16, 2005 7:46 AM
6
English
The numbers represent the page numbers.
If the range or effectiveness of the remote control
decreases, replace the batteries. Use two R6
(SUM-3)/AA(15F) type dry-cell batteries.
CAUTION
•
Do
not use a used battery and a new battery
together.
• Do not use different types of batteries at the
same time.
• Take out the batteries if the remote control is not
to be used for a long time. Otherwise it may
cause a leakage.
Remote control operation
When operating the remote control, point it
towards the front panel of the main unit. If the
remote control is operated from a direction that is
extremely oblique or when there is an obstacle in
the way, signals may not be transmitted.
If the remote control sensor is exposed to a strong
light such as direct sunlight, correct operation may
not be carried out.
13, 16
12
12
16
16
7, 13,
14, 16
7, 15
16
15, 32
34
15
14
12, 17
14
19
28
24
25
13
25, 26
26
33
22
10
32
23
26
7
7
32
15, 17
7
7
15, 32
14
19
19, 28
29
24
24
27
34
34, 35
35
36
35
16
20
16
14
Putting the batteries in
the remote control
Batteries
Using the remote control
FS-Y1[C].book Page 6 Wednesday, February 16, 2005 7:46 AM
7
Introduction
English
This page is for when operating your TV using the
remote control of this product.
Setting the manufacturer's code
1 Slide the remote control mode
selector to the TV side.
2 Keep pressing down TV.
NOTE
Keep pressing down TV until Step 4 is complete.
3 Press ENTER.
4 Press number buttons (1-9, 0).
Ex.:
For a Hitachi TV: Press 1, then 0.
For a Toshiba TV: Press 0, then 8.
If there are more than one manufacturer’s codes,
try them in turn and select the one that causes the
product to work properly.
NOTE
Manufacturer’s codes may be changed without notice.
You may not be able to operate a TV produced by the
manufacturer shown above.
5 Release TV.
For TV operation
Operate the remote control by pointing it towards
the TV.
*1 Make sure to slide the remote control mode
selector to the TV side in advance.
NOTE
When the batteries are replaced, perform the
manufacturer's code setting again.
Operating the TV using
the remote control
Manufacturer Code Manufacturer Code
JVC 01 Samsung 12
Hitachi 10 Sanyo 13
Magnavox 02 Sharp 06
Mitsubishi 03 Sony 07
Panasonic 04, 11 Toshiba 08
RCA 05 Zenith 09
Turn ON/OFF the power.
Change channels.
Adjust volume.
Select channels.
Alternates between the
previously selected channel
and the current channel.
Switch TV and video input.
100+
9
*1
Getting started
FS-Y1[C].book Page 7 Wednesday, February 16, 2005 7:46 AM
8
Connection
English
When positioning the antenna, listen to an actual radio program (refer to “Listening to a radio broadcast” on page 32).
Connecting antennas
C
onnecting AM loop antenna
(
supplied
)
1 Set up the AM loop antenna.
2 Connect antenna cords.
3 Turn the AM loop antenna to the direction of the
best radio reception.
Locate the AM loop antenna as far away from
the main unit as possible.
• Do not locate the AM loop antenna on a metallic
table or close to a TV, personal computer, etc.
Otherwise it may result in bad radio reception.
7 When good radio reception cannot be
obtained with the supplied AM loop antenna
AM
EXT
AM
LOOP
Main unit
(rear panel)
How to insert antenna cords
Connect two antenna cords
as described above.
If the antenna cord is
covered with vinyl on the
tip, twist and pull the vinyl
off and remove.
AM
EXT
AM
LOOP
Electric wire: 3 - 5 m (commercially available)
Put up an electric
wire extending
horizontally,
preferably at a high
place such as
above a window or
outdoors.
Connect the AM loop
antenna cords together.
Main unit
(rear panel)
Electric wire
Twist
AM loop
antenna
Connecting FM antenna (supplied)
7 When good radio reception cannot be
obtained with the supplied antenna or when
using a communal antenna
For details of connecting a separately sold
antenna, refer to the user guide for the antenna
or converter.
FM75Ω
COAXIAL
Put the antenna up straight in the direction where
the best radio reception can be obtained, and fix
by using tape.
Main unit
(rear panel)
FM antenna
FM75Ω
COAXIAL
Antenna cord (not
supplied)
Communal
antenna terminal
Outdoor FM antenna
(commercially
available)
Coaxial cable
(commercially
available)
Converter
(sold separately:
compatible with 300Ω/
75Ω)
Main unit
(rear panel)
Depending on the radio reception
conditions, an FM feeder antenna (sold
separately: compatible with 300Ω) can
be used. In the case, a converter (not
supplied) is required.
or
Connecting up
–
Do not turn on the power until the connection is complete
–
FS-Y1[C].book Page 8 Wednesday, February 16, 2005 7:46 AM
9
Connecting up Connection
English
There is no difference between the left and right
speakers.
CAUTION
• DO NOT connect more than one speaker to one
speaker terminal.
• The speakers of this product are magnetically
shielded, but color irregularities may occur on
the TV depending on how the speakers are
installed. Keep in mind the following.
1. Turn off the main power of your TV before
installing the speakers. Wait for about 30
minutes before turning on the TV again.
2. If color irregularity occurs in pictures, keep a
distance of more than 10 cm between the TV
and the speakers.
NOTE
• Impedance of speaker that can be connected to the
main unit is within a range of 4
Ω
to 16
Ω
.
• In order to have a sufficient cooling effect, leave a
space of more than 1 cm between the main unit and
the speakers or other objects.
Connecting speakers
RL
SPEAKERS
Speaker terminal
Speaker cord
Speaker cord
(supplied)
Speaker cord
(supplied)
Without black line
Without
black line
With black line
With black
line
Right speaker
(rear panel)
Left speaker
(rear panel)
Main unit
(rear panel)
Speaker
grille
Speaker grille can be detached.
Getting started
FS-Y1[C].book Page 9 Wednesday, February 16, 2005 7:46 AM
10
Connecting up Connection
English
This page is for when connecting the main unit with
other devices.
Connecting subwoofer
Connecting with other audio device
When you want to hear sound from the subwoofer,
press S.WFR OUT on the remote control to display
“SUBWOOFER” on the display window on the
main unit. Each time you press the button, the
display toggles between “SUBWOOFER” and
“OFF”.
NOTE
When "SUBWOOFER" is selected, bass sound from
the left and right speakers will be automatically
lowered and the bass sound will be emitted mainly
from the subwoofer.
Connecting with a digital device
CAUTION
• For details of signals to be output, refer to page
30.
• If connecting the main unit with equipment with the
function of a Dolby Digital decoder, the setting in
“D. RANGE COMPRESSION” of “AUDIO” (page 30)
will be invalid regarding sound from the digital
audio output of the main unit.
Connecting other devices
SUB-
WOOFER
OUT
With an amplifier-built in subwoofer (not supplied), you can enjoy a more dynamic bass sound.
Refer to the manual of the subwoofer for details.
Audio cord (not supplied)
(If an audio cord comes with the amplifier-built-in subwoofer,
you can use the cord.)
Amplifier-built-in subwoofer
(not supplied)
Main unit
R
L
AUX
Main unit
Output
Input
Other audio
device
Audio cord (not
supplied)
WhiteRed
PCM/
STREAM
DVD OPTICAL
DIGITAL OUT
Output
Optical digital cord
(not supplied)
Digital device
(MD recorder etc.)
To digital input terminal
Input
Main unit
(continued) – Do not turn on the power until the connection is complete –
FS-Y1[C].book Page 10 Wednesday, February 16, 2005 7:46 AM
11
Connecting up Connection
English
CAUTION
Connect the main unit directly with a TV (or a
monitor) without routing through a VCR.
Otherwise it may cause picture distortion while
playing.
Also, when connecting the main unit to a TV with
a VCR built in, there may be picture distortion
while playing.
You can enjoy pictures of better quality using the
following cord instead of the supplied video cord.
Connecting by using the S-Video cord
Connecting by using the component video
cord
You can enjoy better quality pictures than when
using the S-Video cord.
CAUTION
Use one of either the S-Video cord or the
component video cord. If both cords are used,
pictures may not be played properly.
NOTE
• In order to enjoy pictures with Progressive mode
(page 26), the TV is required to have Progressive
video input.
• If the component video input jacks of your TV are
BNC type, use a plug adapter (not supplied) to
convert the plugs.
• Connect the power cord after all other
connections are complete.
• The standby lamp (on the front panel) will be lit.
Connecting with TV
VIDEO
S-VIDEO
COMPONENT
YPB PR
VIDEO OUT
TV
Supplied composite video cord
Main unit
Main unit
Connecting directly
TV (or
monitor)
VIDEO
S-VIDEO
COMPONENT
YPB PR
VIDEO OUT
TV
Main unit
S-Video cord (not
supplied)
Connecting the power cord
VIDEO
S-VIDEO
COMPONENT
YPB PR
VIDEO OUT
Component video cord
(not supplied)
Main unit
Blue
Red
Green
AC outlet
Supplied power cord
Main unit
Getting started
FS-Y1[C].book Page 11 Wednesday, February 16, 2005 7:46 AM
12
English
(Refer to page 17 for playing MP3/WMA and JPEG.)
• The power will be turned on when any of
PLAY 3, FM, AM, AUX, or 0 on the main unit
and DVD/CD
3, FM, AM, AUX, or 0OPEN/
CLOSE on the remote control is pressed while
the power is off.
If any button other than 0 or 0OPEN/CLOSE is
pressed, the source will also be changed (if
there is a disc loaded, playback will start).
NOTE
• A menu screen may be displayed on the TV after
starting playback of a DVD/VCD/SVCD. In this
case, select a desired item to playback by using the
following buttons on the remote control.
• Select a desired item using cursor
5/3/∞/2 and
press ENTER.
• Select a desired item using the number buttons.
• Depending on the disc, actual operation may be
different from the description.
Playback
1
3
2
page 5
Place a disc with the label side
facing up.
• Place an 8 cm disc in to the
hollow part in the cen
ter.
Press AUDIO.
• The power will be turned on and the STANDBY
lamp will go off.
• Press AUDIO again to turn off the power.
Press 0OPEN/CLOSE to open the disc
tray to load a disc.
Press DVD/CD 3.
The disc tray will close and playback will start.
Screens displayed on the TV when the power is turned ON.
The following messages appear depending on the status of the system.
(When FM, AM or AUX is selected as a source, the messages do not appear.)
Appears when the system is reading the disc information. Wait for a while.
Appears when the Region Code of the DVD VIDEO does not match the code
the system supports. (page 3)
Appears when no disc is loaded.
Appears when opening the disc tray.
Appears when closing the disc tray.
Appears when trying to play back an unplayable disc.
NOW READING
REGION CODE
ERROR!
NO DISC
OPEN
CLOSE
CANNOT PLAY THIS
DISC
Playing discs
FS-Y1[C].book Page 12 Wednesday, February 16, 2005 7:46 AM
13
Basic operations
English
Display window during disc playback
Ex.:
When a DVD VIDEO is played
Ex.:
When a DVD AUDIO is played
If “BONUS” or “B.S.P.” is displayed during a DVD
AUDIO playback, refer to page 27.
Ex.:
When an SVCD or VCD is played
• When playing an SVCD, the SVCD indicator
lights instead of the VCD indicator.
• PBC (Play Back Control): A signal recorded in a
VCD (version 2.0) for controlling playback. It is
possible to enjoy interactive software or software
with a search function using a menu screen
recorded in a PBC compatible VCD. To play a
disc with the PBC function OFF, carry out the
following operations.
• Designate the track number using the number
buttons while the disc is stopped.
• Designate the track number using
¢ while
the disc is stopped, and then press
DVD/CD 3.
• Press RETURN to go back to the upper layer
during the PBC playback of a VCD or SVCD.
Ex.: When a CD is played
Ex.: When an MP3/WMA file is played
Press DISPLAY.
Each time you press the button, the display
indication changes temporarily as follows:
• For DVD VIDEO
• For DVD AUDIO
• For MP3/WMA
• For SVCD/VCD/CD
The clock time indication appears on the display
window.
• Before setting the clock (page 34), “AM 12:00”
appears.
• When the unit is turned off, pressing DISPLAY
turns off the clock indication to save the power
consumption.
SVCDVD-A
Elapsed
playing time
Chapter number
Disc type
SVCDVD-A
Track number
S VCDVD-A
Track number
To switch the display
SVCDVD-A
Track number
SVCDVD-A
Track number
SVCDVD-A
Title number
Chapter number
SVCDVD-A
Group
number
Track number
SVCDVD-A
Group
number
Track number
FS-Y1[C].book Page 13 Wednesday, February 16, 2005 7:46 AM
14
Playing discs (continued)
English
NOTE
• Set the remote control mode selector to
AUDIO before using the number buttons.
• For a VCD or SVCD, this operation can
be carried out when the disc is stopped, or during
playback without the PBC function.
• For a DVD AUDIO, CD, MP3/WMA or JPEG, this
operation can also be carried out when the disc is
stopped.
• This operation may not be carried out for some
discs.
Designate the chapter number or
track number to play during
playback.
• Refer to “How to use the number buttons” on
page 15.
Press 7 during playback.
Press 8 during playback.
To start normal playback again, press DVD/CD 3.
• For JPEG slide-show, pressing DVD/CD
3
starts
playback from the next file.
• It is not possible to pause by pressing 8 on the
main unit during JPEG disc slide-show.
Press 8 during pause.
• Each time you press the button, picture will be
advanced frame-by-frame.
Press 1 or ¡ during playback.
• Each time you press the button, the speed
increases (
×2, ×5, ×10, ×20, ×60). To restore
the normal speed, press DVD/CD 3.
NOTE
• Fast reverse/Fast forward search cannot be carried
out for MP3, WMA, and JPEG.
• For a DVD VIDEO, VCD or SVCD, no sound comes
out during Fast reverse/Fast forward search.
• For a CD or DVD AUDIO, sound is intermittent
during Fast reverse/Fast forward search.
Select what you want to
play by using the number
buttons
To stop playback
To pause playback
To advance picture
frame-by-frame
Fast reverse/Fast forward
search
FS-Y1[C].book Page 14 Wednesday, February 16, 2005 7:46 AM
15
Basic operations
English
Press during playback.
NOTE
• This operation may not be carried out for some
discs.
• It is not possible to go back to the previous title.
Press SLOW or SLOW during
pause.
• Each time you press the button, the playback
speed increases (
×1/32, ×1/16, ×1/8, ×1/4,
×1/2).
•Press
DVD/CD
3 to start normal playback again.
NOTE
• No sound will be produced.
• The picture motion in the reverse direction may not
be smooth.
• For a VCD or SVCD, Slow Motion Playback can be
carried out in the forward direction only.
Press 4 or ¢ during playback*.
• Press ¢ to skip the next chapter or track.
• Press 4 once to skip back to the beginning of
the chapter or track currently being played
(except for JPEG).
•Press GROUP/TITLE or to select the title
or group.
• During playback of a JPEG disc, press ¢ or
cursor ∞ to play the next file, or press 4 or
cursor 5 to play the previous file.
NOTE
* For a VCD or SVCD, this operation can be carried
out during playback without the PBC function.
• Except for a DVD VIDEO, this operation can also be
carried out while the disc is stopped.
• This operation may not be carried out for some
discs.
Playing back from a position
10 seconds before
(One Touch Replay)
Slow Motion Playback
Skip to the beginning of
the selection
5:
20:
15:
25:
: Containing multi-angle views
(page 24)
: Containing multi-audio languages
(page 24)
: Containing multi-subtitle languages
(page 24)
: The disc cannot accept the operation you
have attempted.
How to use the number buttons
Ex.:
Guide icons displayed on the TV screen (On-screen guide)
: Play
: Pause
: Fast reverse/Fast forward search
: Slow Motion Playback (reverse/
forward directions)
FS-Y1[C].book Page 15 Wednesday, February 16, 2005 7:46 AM
16
English
Playing discs (continued)
Press DIMMER repeatedly.
• Each time you press the button, the dimmer
mode changes as follows:
• When the unit is turned off, pressing DISPLAY
turns off the clock indication to save the power
consumption.
The items above can be carried out for all sources.
Press AUDIO VOL +/–.
NOTE
The volume can be also adjusted by turning the
VOLUME control on the main unit.
Bass: Press BASS +/–.
Treble:
Press TREBLE +/–.
• Adjustable range: –5 to +5
Press MUTING.
• No sound will come out from the speakers,
headphones and the subwoofer.
• Press MUTING again to restore the sound.
When the power is turned off once and turned
on again, the sound will be restored.
NOTE
Set the remote control mode selector to
AUDIO before using the number buttons.
To change the
brightness of the display
window (DIMMER)
Adjusting the volume
Adjusting sound quality
Turning off the sound
temporarily (MUTING)
AUTO DIMMER
: During the video source
playback, the display window dims
and the illumination automatically
turns off.
DIMMER ON
: The display window and the
illumination dim.
DISPLAY OFF
: The display window and the
illumination turn off.
DISPLAY ON
: Cancels the dimmer function.
Playing audio/video files
FS-Y1[C].book Page 16 Wednesday, February 16, 2005 7:46 AM
17
Advanced operations
English
Display of an MP3/WMA disc is described here as
an example.
For a JPEG disc, read “track” as “file”.
NOTE
When playing a disc containing both MP3/WMA and
JPEG files, set one of them to be played (page 29).
1 Load a disc.
2 Press cursor 5/∞ to select a
group.
3 Press cursor 3 to move to the
track list.
• Press cursor 2 to go back to the group list.
4 Press cursor 5/∞ to select a
track.
5 Press DVD/CD 3 or ENTER.
NOTE
• GROUP/TITLE can also be used in Step 2.
• The number buttons can also be used in Step 4. In
this case, Step 5 is not needed. (For how to use the
number buttons, refer to page 15).
• 4 or
¢ can also be used in Step 4. In this case,
Step 5 is not needed.
1 Press REPEAT.
• Each time you press the button, the Repeat
mode and its indication change as follows:
2 Press DVD/CD 3.
NOTE
• The Repeat types can be changed during playback.
• The Repeat mode will be automatically canceled if
there is a file that cannot be played (page 3).
Playback
Current group /total
group number
Current track
(file)
Tag information (for
MP3/WMA)
Playback mode (PROGRAM,
RANDOM, REPEAT)
Elapsed playing time of
current track (for MP3/
WMA)
Playback status
Current track (file) /
total track (file)
number on current
group
Current group
Total track (file)
number on disc
Repeat playback
Repeat items On the TV On the display
window
Current track
(MP3/WMA only)
REPEAT
TRACK
Current group REPEAT
GROUP
Entire disc REPEAT
ALL
Cancel No indication
Current track
during Program/
Random play
(MP3/WMA only)
REPEAT
STEP
All tracks during
Program/Random
play (MP3/WMA
only)
REPEAT
ALL
Slide-Show Playback
• In Step 5, for a JPEG disc, when DVD/CD 3 is pressed, files will be continuously played from the
selected file (Slide-Show Playback), and when ENTER is pressed, only a selected file will be played.
• Display time for a file in Slide-Show Playback is about 3 seconds.
• When all files are played through, the playback will be automatically stopped.
FS-Y1[C].book Page 17 Wednesday, February 16, 2005 7:46 AM
18
English
NOTE
Set the remote control mode selector to
AUDIO before using the number buttons.
This system can store the stop point, and when
you start playback again by pressing DVD/CD
3
(even while on standby), it starts from the position
where you have stopped—Resume Play. The
RESUME indicator lights on the display window
when you stop playback.
How to suspend playback
Perform any of the following operations during
playback.
* Even if the power is turned off by pressing
AUDIO after this, the position where playback
has been stopped will be stored.
To start playback from the stored
position
Press DVD/CD 3.
NOTE
• This function does not work in Program Playback or
Random Playback.
• The position where playback starts again may be a
little different from the stopped position.
• When a disc menu is displayed, the Resume
function may not work.
• The audio language, the subtitle language and the
angle at that time are stored as well as the stopped
position.
• The stored position will be cleared if the disc tray is
opened. Further, if 7 is pressed during playback,
“RESUME” will be displayed. If 7 is pressed again,
the stored information will be cleared.
• At the time of purchase, Resume is set to ON.
Resume can be set to OFF (page 30).
Press 7 once.*
Press AUDIO to turn off the power.
Change the source to FM, AM or AUX.*
Resume Playback
FS-Y1[C].book Page 18 Wednesday, February 16, 2005 7:46 AM
19
Advanced operations
English
NOTE
Set the remote control mode selector
to AUDIO before using the number
buttons.
1 Press MENU or TOP MENU
while the disc is stopped or
during playback
*1
.
• The disc menu screen will be displayed.
•Only TOP MENU can be used for DVD
AUDIOs.
2 Press cursor 5/3/∞/2 (only
for a DVD VIDEO or DVD AUDIO)
or the number buttons to select
the scene to be played.
• Refer to “How to use the number buttons”
(page 15).
• When the menu screen has a couple of
pages, press
4 or ¢ to change the
page (only for a VCD and SVCD).
3 Press ENTER.
NOTE
*
1
For a VCD and SVCD, this operation can be carried
out only when the PBC function is off.
• This operation cannot be carried out for a disc
without a menu screen.
• Playback may start for some discs without pressing
ENTER.
1 Press ON SCREEN twice during
playback
*2
.
The menu bar will be displayed (page 28).
2 Press cursor 2 /3 to select
.
3 Press ENTER.
4 Input the time
*3
using the
number buttons (1-9, 0).
Ex.: When you want to play a DVD VIDEO
from the position of (0 hour) 23
minutes 45 seconds, press the
buttons in the order:
• If you input wrong numbers, press cursor
2
to delete the numbers and re-input.
5 Press ENTER.
To delete the menu bar, press ON SCREEN.
NOTE
• This function does not work for a DVD VIDEO with
no time information recorded.
• This function does not work during Program or
Random Playback.
*
2
For a VCD and an SVCD, the operation can be
carried out when the disc is stopped or during
playback without the PBC function.
*
3
Time search for a DVD VIDEO is from the beginning
of the title, for a DVD AUDIO from the beginning of
the track being played. Time search for a VCD, an
SVCD and a CD is as follows:
• When the disc is stopped, time search is from the
beginning of the disc.
• When the disc is being played, time search is
within the track currently being played.
Select the scene from
the menu
Designate the time
(Time search)
2
3
4
5
Select the scene to be played
FS-Y1[C].book Page 19 Wednesday, February 16, 2005 7:46 AM
20
English
NOTE
Set the remote control mode selector to
AUDIO before using the number buttons.
It is possible to program a maximum of 99 chapters
or tracks. The same chapter or track can be
programmed more than once.
1 While the disc is stopped, press
PLAY MODE repeatedly to
display “PRGM.” on the display
window on the main unit.
2 Create a program following the
description on the TV screen.
Refer to “How to use the number buttons”
(page 15).
• The input content varies depending on the
disc type.
• DVD VIDEO: Titles and chapters
• VCD, SVCD, CD: Tracks
• DVD AUDIO, MP3/WMA:
Groups and tracks
• To select a DVD AUDIO bonus group, carry
out the operations of “Playing the Bonus
Group” on page 27 in advance to erase the
display “BONUS”.
• If the input number of chapters or tracks is
greater than 99, “MEM FULL” will be
displayed.
• In the case of a VCD, SVCD or CD, when
the total playback time reaches 9 hours 59
minutes 59 seconds, “--:--” will be displayed
on the display window (it is possible to
continue programming).
Play the disc in the
desired order
(Program Playback)
TV screen
Program
screen
Program Playback/Random Playback
FS-Y1[C].book Page 20 Wednesday, February 16, 2005 7:46 AM
21
Advanced operations
English
To program on the display window on the main
unit, operate as follows:
(1) Select a title/group using the number
buttons.
(2) Designate a chapter/track number using the
number buttons.
• Refer to “How to use the number buttons”
(page 15).
• The program number will be displayed on
the lower display window (Ex.: “P2”).
(3) Repeat the above operations (1) and (2) to
complete the program. Then, advance to
Step 3.
NOTE
• The group/title number flashes on the display
window after making each program step.
• Only for a DVD VIDEO, DVD AUDIO, VCD, or an
MP3/WMA: If you press ENTER instead of
designating a track/chapter number,
“ALL” is
displayed and all of the tracks/chapters in the
selected group/title are programmed.
3 Press DVD/CD 3.
• To resume normal playback, press PLAY
MODE repeatedly to show the playback
indication on the display window on the
main unit while the disc is stopped. The
program content will not be erased.
• The following operations erase the program
content:
• Press CANCEL repeatedly (Programs
will be erased one by one)
• Press
7 while the disc is stopped
• Open the disc tray
• Turn off the power
1 Press PLAY MODE repeatedly
to display “RANDOM” on the
display window on the main unit
while the disc is stopped.
• “RANDOM” will also be displayed on the TV
screen.
2 Press DVD/CD 3.
• The same chapter or track will not be
played twice.
• To resume normal playback, press PLAY
MODE repeatedly to show the playback
indication on the display window on the
main unit while the disc is stopped.
• Random Playback will also be canceled by
carrying out the following operations:
• Open the disc tray
• Turn off the power
• The previous track will not be returned to
even if
4 is pressed repeatedly during
Random Playback (the beginning of the
current chapter or track will be returned to).
Playing the disc in a
random order
(Random Playback)
FS-Y1[C].book Page 21 Wednesday, February 16, 2005 7:46 AM
22
English
Refer to page 17 for Repeat Playback of MP3 and
JPEG files.
1 Press REPEAT during playback.
• Each time you press the button, the Repeat
mode and its indication change as follows:
For DVD VIDEO
For DVD AUDIO
For CD/VCD/SVCD
NOTE
• For a VCD and SVCD, the operation can be carried
out only when the disc is stopped or during playback
without the PBC function.
• It is possible to set Repeat mode on the menu bar.
For how to operate, refer to “Playing the designated
part repeatedly (A-B Repeat Playback)”(page 23).
• For a DVD VIDEO and DVD AUDIO, if the source is
switched to FM, AM or AUX, the Repeat mode will
be canceled.
Repeat Playback during Program or
Random Playback
Playing the title/chapter/
group/track/all tracks
repeatedly (REPEAT)
Repeat items On the TV On the display
window
Current chapter
Current title
Cancel
CHAP
TITLE
OFF
Repeat items On the TV On the display
window
Current track
Current group
Cancel
Repeat items On the TV On the display
window
Current track
All tracks
Cancel
Repeat items On the TV On the display
window
Current chapter/
track
or REPEAT
STEP
All tracks during
Program/Random
play
or REPEAT
ALL
Cancel
or no
indication
TRACK
GROUP
OFF
TRACK
ALL
OFF
STEP
ALL
OFF
Repeat Playback
FS-Y1[C]-04.fm Page 22 Thursday, February 17, 2005 1:25 PM
23
Advanced operations
English
1 Press ON SCREEN twice during
playback.
The menu bar (page 28) will be displayed.
2 Press cursor2/3 to select
.
3 Press ENTER.
4 Press cursor5/∞ to display
.
Other Repeat modes can be selected here.
For other Repeat modes, refer to “Playing the
title/chapter/group/track/all tracks repeatedly
(REPEAT)”
(page 22).
5 Press ENTER at the start point
of the part to be repeated
(designating A point).
• The icon on the menu bar will be .
6 Press ENTER at the end point of
the part to be repeated
(designating B point).
• The icon on the menu bar will be
and the part between A and B points will be
played repeatedly.
• A-B Repeat Playback will be canceled by
carrying out the following operations:
• Press
7.
• Select and press ENTER twice.
NOTE
• A-B Repeat Playback is possible only within the
same title or track. A-B Repeat Playback cannot be
carried out during PBC playback, Program
Playback, Random Playback and Repeat Playback.
• You can do the A-B Repeat Playback using the
REPEAT A-B button on the remote control.
Playing the designated
part repeatedly
(A-B Repeat Playback)
OFF
OFF
A B
A-
A-B
A-B
FS-Y1[C].book Page 23 Wednesday, February 16, 2005 7:46 AM
24
English
1 Press SUBTITLE during
playback of a disc containing
subtitles in several languages.
• Each time you press the button, the subtitle
will be alternated between ON and OFF.
2 Press cursor 5/∞ to select a
subtitle language.
• For a language code such as “AA”, refer to
“Language codes” (page 38).
• The manner of displaying subtitle
languages may be different depending on
the disc.
3 Wait for a few seconds or press
ENTER to go off the window.
NOTE
• It is also possible to operate by using the menu bar
(page 28).
• For an SVCD, each time you press SUBTITLE in
Step 1, the subtitle type and OFF will be alternated.
1 Press AUDIO during playback of
a disc containing several audio
languages.
• Each time you press the button, the audio
language will be alternated. Also, the audio
language can be changed by pressing
cursor
5/∞.
• For a language code such as “AA”, refer to
“Language codes” (page 38).
• “ST”, “L” and “R” displayed when playing a
VCD or SVCD respectively represent
“Stereo”, “Left sound” and “Right sound”.
2 Wait for a few seconds or press
ENTER to go off the window.
NOTE
It is also possible to operate by using the menu bar
(page 28).
1 Press ANGLE during playback
of a scene containing multi-view
angles.
• Each time you press the button, the angle
will be alternated. Also, the angle can be
changed by pressing cursor
5/∞.
2 Wait for a few seconds or press
ENTER to go off the window.
NOTE
It is also possible to operate by using the menu bar
(page 28).
Selecting the subtitles
(only for moving image)
TV screen
Ex.:
Selecting the audio
language
Selecting a view angle
TV screen
Ex.:
(only for moving image)
TV screen
Ex.:
Other convenient functions
FS-Y1[C].book Page 24 Wednesday, February 16, 2005 7:46 AM
25
Advanced operations
English
1 Press ZOOM during playback or
while paused.
• Each time you press the button, the picture
magnification will be changed.
• (For a JPEG) You cannot change the
picture magnification during slide-show
playback.
2 Select the portion you want to
see by using cursor 3/5/2/∞.
• To resume normal playback, select “ZOOM
OFF” in Step 1.
1 Press VFP during playback or
while paused.
The current setting will be displayed on the
TV screen.
• GAMMA: Adjust this if the neutral color is
bright or dark. The brightness of dark and
bright portion is maintained.
• BRIGHTNESS: Adjust this if the picture is
bright or dark on the whole.
• CONTRAST: Adjust this if the far and near
position is unnatural.
• SATURATION: Adjust this if the picture is
whitish or blackish.
• TINT: Adjust this if the appearance of flesh
tone is unnatural.
• SHARPNESS: Adjust this if the picture is
indistinct.
2 Press cursor 2/3 to select VFP
mode.
• It is recommended to select “NORMAL”
usually, or “CINEMA” in a dark room. When
either “NORMAL” or “CINEMA” is selected,
go to Step 7.
• When either “USER 1” or “USER 2” is
selected, the adjustment can be carried out
in detail in the operations after Step 3.
3 Press cursor 5/∞ to select an
item to be adjusted.
4 Press ENTER.
5 Press cursor 5/∞ to change the
value.
6 Press ENTER.
To adjust other items, go back to Step 3.
7 Press VFP to go off the window.
NOTE
• If no operation is made for several seconds during
the procedure, the settings made so far will be
automatically stored.
• “VFP” is an abbreviation of “Video Fine Processor”.
Enlarging the picture
(ZOOM)
Adjusting the picture
quality (VFP)
(only for moving image)
GAMMA
TV screen
Ex.:
FS-Y1[C].book Page 25 Wednesday, February 16, 2005 7:46 AM
26
Other convenient functions (continued)
English
The two speakers produce an effect resembling
surround-sound.
1 Press 3D PHONIC during
playback.
• Each time you press the button, the 3D
PHONIC will be alternated as follows:
• While 3D PHONIC is activated,
“
3D
PHONIC
”
appears and the 3D PHONIC
indicator lights on the display window.
NOTE
• 3D PHONIC is effective for the speakers and
headphones.
• When noise is produced or sound is distorted, set
3D PHONIC to “OFF”.
• You cannot operate some DVD AUDIO discs.
The audio of a DVD VIDEO may be recorded at a
lower level (volume) than for other types of disc. If
the difference is not to your liking, adjust the DVD
Level.
1 Press DVD LEVEL during
playback.
• Each time you press the button, the level
will be alternated among “NORMAL”,
“MIDDLE” and “HIGH”.
• Select the level while listening to the sound
played.
NOTE
• DVD Level is effective only for playback of a DVD
VIDEO.
• Even if the DVD Level is changed, the output level
from the digital audio output terminal will not be
changed.
In the Progressive mode, better pictures can be
enjoyed.
CAUTION
• In order to enjoy pictures in the Progressive
mode, the following requirements should be met:
• There must be a component video input terminal
on the TV set connected to the main unit.
• The main unit and the TV set must be
connected using a component video cord
(page 11).
When the above requirements are not satisfied,
leave the main unit in the Interlace mode. If the
Progressive mode is set, pictures may be distorted.
Press and hold SCAN MODE for 2
seconds when there is no disc loaded
or while the disc is stopped.
• Each time you press and hold the button, the
scan mode alternates between the
“PROGRESSIVE” mode and the “INTERLACE”
mode.
NOTE
Progressive mode:
All scanned lines will be displayed at once. Pictures
of higher resolution than those in the Interlace mode
can be realized.
Interlace mode:
This is a conventional image method. Half of the
scanned lines displayed in the Progressive mode
will appear, alternating with the other half.
Creating realistic sound
(3D PHONIC)
3D PHONIC
TV screen
Ex.:
ACTION : Suitable for action movies,
sport programs or other lively
programs.
DRAMA : You can relax with a natural
atmosphere.
THEATER : You can enjoy the sound effect
as if you were watching the
movie in a theater.
OFF : Cancels 3D PHONIC (initial
setting).
Adjusting playback level
(DVD LEVEL)
Enjoying better pictures
(SCAN MODE)
FS-Y1[C].book Page 26 Wednesday, February 16, 2005 7:46 AM
27
Advanced operations
English
NOTE
Set the remote control mode selector to
AUDIO before using the number buttons.
There are some DVD AUDIO discs with a special
group, called “Bonus Group”, recorded.
NOTE
This operation can be carried out when “BONUS” is lit
on the display window on the main unit.
1 Press GROUP/TITLE
repeatedly during playback to
select a bonus group.
“KEY_ _ _ _” appears on the TV screen, and
on the display window on the main unit.
• The bonus group is usually recorded as the
last group.
2 Press the number buttons to
enter a pin code (4 digits).
The method of getting a pin code may be
different depending on the disc.
3 Press ENTER.
• When a correct pin code is entered,
“BONUS” disappears and the playback of
the bonus group starts.
• If an incorrect pin code is entered, try
entering a correct pin code again.
There are some DVD AUDIO discs with still
pictures recorded. Among the still pictures, there
are pictures called B.S.P. (Browsable Still
Pictures). With these pictures, it is possible to
switch a picture as if turning over pages.
NOTE
This operation can be carried out when “B.S.P.” is lit
on the display window on the main unit.
1 Press PAGE during playback.
Each time you press the button, the still picture
will be switched over. It is also possible to
switch the picture using cursor
5
/
∞
.
2 Wait for a few seconds or press
ENTER to go off the window.
Playing the Bonus Group
Browsable Still Pictures
(B.S.P.)
TV screen
Ex.:
Functions specific to DVD AUDIO
FS-Y1[C].book Page 27 Wednesday, February 16, 2005 7:46 AM
28
English
NOTE
• Set the remote control mode selector to
AUDIO before using the number buttons.
• This operation can be carried out when there is a
disc loaded. There are some functions that may not
work while the disc is stopped.
1 Press ON SCREEN twice.
The status bar and the menu bar will appear
on the TV screen.
2 Press cursor 2/3 to select an
item to be operated.
3 Press ENTER.
• The selected function can be set. For the
setting content, refer to the following
“Functions list”.
• The currently active function shows.
• To delete the menu bar, press ON
SCREEN.
Functions list
For the functions with no special description for the
operations, press cursor
5/∞ to select, and press
ENTER to determine.
Information displayed on the status bar
DVD VIDEO/DVD AUDIO (the example below is for
a DVD VIDEO)
VCD/SVCD/CD (the example below is for a CD)
The above is an example for a DVD VIDEO.
Status bar
Menu bar
Time display
selection
Select this to change time information
displayed on the display window on the
main unit and the status bar. Each time
ENTER is pressed, the display will be
alternated.
DVD VIDEO/DVD AUDIO (operating
during playback)
TOTAL : Elapsed playing time of current title/
group.
T.REM : Remaining time of current title/group.
TIME : Elapsed playing time of current
chapter/track.
REM : Remaining time of current chapter/track.
CD (operating during playback)/VCD/
SVCD
TIME : Elapsed playing time of current
track.
REM : Remaining time of current track.
TOTAL: Elapsed playing time of disc.
T.REM : Remaining time of disc.
Repeat mode
See page 22.
Time search
See page 19.
Chapter search
(DVD VIDEO)/Track
search (DVD
AUDIO)
Select a chapter/track. Press the
number buttons to input the chapter/
track number and press ENTER.
Ex.:
Audio language/
Audio (DVD VIDEO/
DVD AUDIO/VCD/
SVCD)
See page 24.
Subtitle language
(DVD VIDEO/SVCD)
See page 24.
View angle (DVD
VIDEO/DVD AUDIO)
See page 24.
Page switch (DVD
AUDIO)
Switch the still pictures (B.S.P.) recorded
on a DVD AUDIO disc (page 27).
TIME
CHAP
TRACK
.
/
5
2
4
5:
24:
PAGE
Transfer rate
(only for DVD VIDEO)
DVD VIDEO:
Current title number
DVD AUDIO:
Current group number
Time Playback status
DVD VIDEO:
Current chapter number
DVD AUDIO:
Current track number
Playback mode
Current track number
Time Playback status
Using the menu bar
FS-Y1[C].book Page 28 Wednesday, February 16, 2005 7:46 AM
29
Advanced operations
English
NOTE
The playback status mark has the same meaning of
the mark on the On-screen guide (page 15).
The initial settings of the system can be changed
according to the environment the system is used
in.
NOTE
• Set the remote control mode selector to
AUDIO before using the number buttons.
• The top and bottom of the preference screen may
not be displayed on a wide TV. Adjust the picture
size on the TV.
1 Press SET UP while the disc is
stopped or no disc is loaded
(“NO DISC” is displayed).
• The following screen will be displayed on
the TV.
• Proceed with operations by following the
description on the TV screen.
NOTE
• If the selected language is not recorded on the disc,
the optimum language set for the disc will be
displayed.
• For a language code such as “AA”, refer to the
“Language codes ” (page 38).
Basic operations
LANGUAGE
Items Contents
MENU LANGUAGE
Select the language for the DVD VIDEO menu.
AUDIO
LANGUAGE
Select the audio language for the DVD VIDEO.
SUBTITLE
Select the subtitle language for the DVD
VIDEO.
ON SCREEN
LANGUAGE
Select the language displayed on the
preference screens.
PICTURE
Items Contents ( : initial setting)
MONITOR
TYPE
Select a display method suitable for your TV.
16 : 9:
Select this when the aspect ratio of your wide
TV is fixed to 16:9 (when playing a DVD
VIDEO recorded at 4:3, the system
automatically adjusts the screen width of the
output signal).
:
Select this when the aspect ratio of your TV is
conventional 4:3. While viewing a wide screen
picture, the black bars appear on the top and
bottom of the screen.
4 : 3 PS (Pan Scan):
Select this when the aspect ratio of your TV is
conventional 4:3. While viewing a wide screen
picture, the left and right edges of the picture
will not be shown on the screen. (If the disc is
not compatible with Pan Scan, the picture will
be displayed at the Letter Box ratio.)
PICTURE
SOURCE
Select an item suitable to the video source.
The video source type (a video or film) is
automatically selected.
FILM:
Select this item when you want to view a film
or video recorded with the progressive scan
method.
VIDEO:
Select this item when you want to view a
normal video.
SCREEN
SAVER
Select the Screen Saver mode between /
OFF (Screen Saver activates when there is
no operation made for about 5 minutes since
a still picture was last displayed).
FILE TYPE If there are both MP3/WMA and JPEG files on
a disc, you can select which files to play.
Select this item when you want to play back
MP3/WMA files.
STILL PICTURE:
Select this item when you want to play back
JPEG files.
4 : 3 LB (Letter Box)
AUTO:
ON
AUDIO
Preferences
FS-Y1[C].book Page 29 Wednesday, February 16, 2005 7:46 AM
30
Preferences (continued)
English
AUDIO
Items Contents ( : initial setting)
DIGITAL
AUDIO
OUTPUT
Select an output signal type from the
following in accordance with the device
connected to the digital audio output
terminal (AV amplifier, etc.). (See the list
below for the preference items and output
signal.)
PCM ONLY:
Device corresponding only to linear PCM.
DOLBY DIGITAL/PCM:
Dolby digital decoder or a device having the
same function.
:
DTS/Dolby digital decoder or a device
having the same function.
DOWN MIX Switch signal from the digital output
terminal of the DVD VIDEO according to the
connected device. Select this when Digital
Audio Output is set to “PCM ONLY”.
DOLBY SURROUND:
A Dolby Pro Logic decoder-built-in device.
:
An ordinary device.
• When 3D PHONIC is activated, Down
Mix does not work.
D (Dynamic).
RANGE
COMPRESSI
ON
To make adjustments for the difference
between a high volume and a low volume
when playing back with low volume (only for
a DVD recorded with Dolby digital).
:
D. Range Compression automatically
works.
ON:
D. Range Compression always works.
STREAM/PCM
STEREO
AUTO
OTHERS
Items Contents ( : initial setting)
RESUME Select /OFF. (page 18)
ON
SCREEN
GUIDE
Select /OFF. (page 15)
PARENTAL
LOCK
Set the Parental Lock function to cut off
violent scenes or replace the scenes with
others. (This is effective only for discs
equipped with the Parental Lock function.)
COUNTRY CODE (page 31)
Select your country.
SET LEVEL:
The restriction is stricter as the number
becomes smaller. “NONE” is no restriction.
PASSWORD (essential):
Enter four-digit number as your password
using the number buttons (1-9, 0) every
time. (Enter “8888” if you forget your
password.)
The password is required at the time of
playback.
• If you enter a wrong password three
times, “EXIT” will be automatically
selected.
ON
ON
List of relationships of DIGITAL AUDIO OUTPUT preference items and output signal
NOTE
• For a DVD VIDEO: There is a 20 bit or 24 bit output for DVD VIDEO without content protection set.
• For a DVD AUDIO: There is no output for DVD AUDIO with content protection set.
Playback disc
DIGITAL AUDIO OUTPUT
STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY
48 kHz, 16/20/24 bits
Linear PCM DVD VIDEO
96 kHz linear PCM DVD VIDEO
48 kHz, 16 bits stereo linear PCM
48/96/192 kHz,
16/20/24 bits linear PCM DVD AUDIO
44.1/88.2/176.4 kHz,
16/20/24 bits linear PCM DVD AUDIO
44.1 kHz, 16 bits stereo linear PCM
DTS DVD VIDEO
DTS bit stream 48 kHz, 16 bits stereo linear PCM
DOLBY DIGITAL DVD VIDEO/
DVD AUDIO
DOLBY DIGITAL bit stream
48 kHz, 16 bits stereo
linear PCM
CD/VCD/SVCD
44.1 kHz, 16 bits stereo linear PCM/48kHz, 16 bits linear PCM
DTS CD
DTS bit stream 44.1 kHz, 16 bits linear PCM
MP3/WMA disc
32/44.1/48 kHz, 16 bits stereo linear PCM
FS-Y1[C]-04.fm Page 30 Thursday, February 17, 2005 8:43 AM
34
English
Connect the other audio device to this system in
advance (page 10).
1 Press AUX.
The source changes to AUX.
2 Play the other audio device.
For details, refer to the manual of the device
connected.
3 Adjust the volume and the
sound quality of the system
(page 10).
Without setting the built-in clock, you cannot use
any timers.
• To exit from the clock setting, press CLOCK/
TIMER as required.
• To correct a misentry during the procedure
below, pressing CANCEL can return to the
previous step.
1 Press CLOCK/TIMER.
• If you have already adjusted the clock
before, press the button repeatedly until the
clock time starts flashing.
2 Press cursor 3/2 to adjust the
hour, then press SET.
3 Press cursor 3/2 to adjust the
minute, then press SET.
Now the built-in clock starts to work.
Using the daily timer, you can wake up with your
favorite song.
• You can store the three daily timer settings;
however, you can activate only one of the daily
timer.
• To correct a misentry during the procedure
below, pressing CANCEL can return to the
previous step.
Setting the built-in clock
Setting the daily timer
SVCDVD-A
Setting the Various Timer
Listening to the sound of
other audio device
FS-Y1[C].book Page 34 Wednesday, February 16, 2005 7:46 AM
39
Français
Généralités
Source d'alimentation: Secteur 120 V , 60 Hz
Consommation: 25 W (en fonctionnement)
1,0 W (en attente)
Poids: 2,7 kg
Dimensions extérieures
(W x H x D): 150 mm x 152 mm x 246 mm
Lecteur de DVD
Disques reproductibles: DVD VIDEO, DVD AUDIO,
VCD, SVCD, CD, CD-R/RW (format
CD, VCD, MP3, WMA, JPEG),
DVD-R/-RW (format vidéo)
Sortie vidéo
Standard de couleur: NTSC
Résolution horizontale:500 lignes
Vidéo composite x1: 1,0 V (c-c)/75
Ω,
synchronisation négative
S-vidéo x1: Sortie Y: 1,0 V (c-c)/75
Ω,
synchronisation négative
Sortie C: 0,286 V (c-c)/75
Ω
Vidéo en composantes x1: Sortie Y: 1,0 V (c-c)/75 Ω
Sortie PB/PR: 0,7 V (c-c)/75 Ω
Sortie audio
Sortie sonore analogique:
Enceintes x2
Puissance de sortie: 18 W par canal, min.
RMS, à 4
Ω à 1 kHz
avec moins de 10% de
distorsion harmonique
totale
Impédance convenable: 4 Ω 16 Ω
Casque d'écoute x1: 11 mW/32 Ω
Impédance convenable: 16 Ω à 1 kΩ
Caisson de grave x1: 500 mVrms/10 kΩ
Sortie sonore numérique:
Optique x1: –21 dBm à –15 dBm
Entrée audio
Entrée sonore: AUX x1
400 mV/50 k
Ω
Tuner
Tun er FM :
Fréquences reçues: 87,5 MHz à 108,0 MHz
Antenne: 75
Ω- Type asymétrique
Tun er AM :
Fréquences reçues: 530 kHz à 1 710 kHz
Antenne: Prise d'antenne extérieure
(antenne cadre)
Enceinte
Type: Haute fidélité
Type à évent acoustique
accordé à 1 voies
Type blindé
magnétiquement
Haut-parleurs: 1 cône de 8 cm
Réponse en fréquence 60 à 20 000 Hz
Capacité de puissance soutenue: 20 W
Impédance: 4
Ω
Niveau de pression sonore: 81 dB/W m
Dimension (L
x
H
x
P): 120 mm
x
150 mm
x
188 mm
Poids (1 enceinte): 1,5 kg
La conception et les spécifications sont sujettes à
changement sans notification.
•
Spécifications
Références
FS-Y1[C]FR-specification.fm Page 39 Thursday, February 17, 2005 8:53 AM
… 83

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC SP-FSY1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC SP-FSY1 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van JVC SP-FSY1

JVC SP-FSY1 Gebruiksaanwijzing - Nederlands, Deutsch, Français - 138 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info