546765
57
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
G-1
CAUTION
Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get
out.)
Do not place any naked flame sources, such as lighted
candles, on the apparatus.
When discarding batteries, environmental problems must
be considered and local rules or laws governing the
disposal of these batteries must be followed strictly.
Do not expose this apparatus to rain, moisture, dripping
or splashing and that no objects filled with liquids such as
vases, shall be placed on the apparatus.
Caution ––
switch!
Disconnect the mains plug to shut the power off completely.
The
switch in any position does not disconnect the mains
line. The power can be remote controlled.
Warnings, Cautions and Others
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
RX-8020V[UJ]Safety_f 02.5.22, 10:06 AM1
G-2
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect from
damage.
Locate the apparatus as follows:
Front: No obstructions open spacing.
Sides: No obstructions in 10 cm from the sides.
Top: No obstructions in 10 cm from the top.
Back: No obstructions in 15 cm from the back
Bottom: No obstructions, place on the level surface.
In addition, maintain the best possible air circulation as illus-
trated.
Floor
Spacing 15 cm or more
Wall or obstructions
RX-8020VBK
Front
Stand height 15 cm or more
RX-8020V[UJ]Safety_f 02.5.22, 10:06 AM2
2
Introduction
We would like to thank you for purchasing one of our JVC products.
Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance
from your unit, and retain this manual for future reference.
Features
Dolby Digital EX*
Dolby Digital EX is newly introduced surround encoding format
as an extension of multi-channel Dolby Digital, designed to add
an extra surround channel to Dolby Digital 5.1-channel. By using
a matrix encoding/decoding method, additional “surround back”
channel signal is encoded (and decoded) in both the left and right
surround channel signals.
DTS-ES Extended Surround (DTS-ES)**
DTS-ES is another new format developed by Digital Theater
Systems, Inc., adding a surround back channel on the basis of
DTS Digital Surround.
Dolby Pro Logic II*
Dolby Pro Logic II converts all 2-channel stereo software,
especially Dolby Surround encoded software, into 5-channel
(plus subwoofer) signals. It reproduces realistic Surround sounds
approaching to Dolby Digital 5.1-channel. Dolby Pro Logic II has
two modes to reproduce—Movie mode and Music mode.
Neo:6**
Neo:6 can reproduce realistic Surround fields by converting
2-channel stereo software into 6-channel (plus subwoofer) signals.
Neo:6 has two modes to reproduce—Neo:6 Cinema and Neo:6
Music.
DAP (Digital Acoustic Processor)
Sound field simulation technology allows precise ambience
recreation of existing theaters and halls. Thanks to the high-
performance DSP (Digital Signal Processor) and high-capacity
memory, you can enjoy 5.1-channel surround by playing
2-channel or multi-channel software.
Multi-channel headphone virtual surround
sound—3D HEADPHONE
The built-in headphone virtual surround system is compatible with
Multi-channel software like Dolby Digital, DTS Digital Surround,
etc. Thanks to the new signal processing algorithms used by the
high-performance DSP, you can enjoy a natural surround sound
through the headphones.
COMPU LINK/TEXT COMPU LINK/AV COMPU
LINK remote control systems
These COMPU LINK remote control systems allow you to
operate other JVC’s audio/video components from this receiver.
Precautions
Power sources
When unplugging the receiver from the wall outlet, always pull
the plug, not the AC power cord.
Do not handle the AC power cord with wet hands.
If you are not going to operate the receiver for an extended period
of time, unplug the AC power cord from the wall outlet.
Ventilation
High power amplifiers built in this receiver will generate heat inside
the cabinet. For safety, observe the following carefully.
Make sure there is good ventilation around the receiver. Poor
ventilation could overheat and damage the receiver.
Do not block the ventilation openings or holes. (If the ventilation
openings or holes are blocked by a newspaper or cloth, etc., the
heat may not be able to get out.)
Others
Should any metallic object or liquid fall onto the unit, unplug the
unit and consult your dealer before operating any further.
Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as vases
shall be placed on the apparatus.
Do not disassemble the unit since there are no user serviceable
parts inside.
If anything goes wrong, unplug the AC power cord and consult your
JVC dealer.
*
Manufactured under license from Dolby Laboratories. “Dolby, “Pro
Logic,” and the double-D symbol are trademarks of Dolby
Laboratories.
**
“DTS,“DTS-ES Extended Surround” and “Neo:6” are trademarks
of Digital Theater Systems, Inc.
EN01-15.RX-8020V[UJ]_f 02.5.22, 9:40 AM2
3
Parts Identification
Become familiar with the buttons and controls on the receiver before use.
Refer to the pages in parentheses for details.
ANALOG
DIGITAL EQ INPUT ATT
SLEEP
VOLUME
ONE TOUCH OPERATION
3D - PHONIC
MIDNIGHT MODE
AUTO MUTING
TUNED STEREO
LINEAR PCM
DIGITAL
L
SUBWFR
LS RS
CR
S
LFE
DGTL AUTO DVD MULTI
PRO LOGIC
DSP
HEADPHONE
SB
12
1
SPEAKERS
2
3
4
5
67
8
9
0
-
=
~
!
@
#
$
%
^
&
Front Panel
Display Window
When using the VIDEO input jacks and/or
USB AUDIO terminal on the front panel,
detach the front terminal cover.
f SOURCE NAME buttons (17)
g CONTROL UP 5/DOWN buttons (21, 41, 42)
h BASS BOOST button and lamp (31)
Display Window
1 ANALOG indicator (19)
2 Speaker indicators and signal indicators (17)
3 DGTL (digital) AUTO indicator (19)
4 DVD MULTI indicator (37)
5 DSP indicator (18, 34)
6
PRO LOGIC indicator (33)
PRO LOGIC II indicator (32)
7 3D-PHONIC indicator (33, 34)
8 MIDNIGHT MODE indicator (24)
9 TUNED indicator (27)
0 STEREO indicator (27, 28)
- ONE TOUCH OPERATION indicator (26)
= Digital signal format indicators (19)
~ SPEAKERS 1/2 indicators (18)
! Main Display
@ HEADPHONE indicator (18, 34)
# DIGITAL EQ (equalization) indicator (39)
$ INPUT ATT (attenuator) indicator (30)
% SLEEP indicator (20)
^ AUTO MUTING indicator (28)
& VOLUME level indicator (16, 20)
Front Panel
1 STANDBY/ON button and STANDBY lamp (16, 27)
2 SPEAKERS ON/OFF 1 button (18)
SPEAKERS ON/OFF 2 button (18)
3 FM/AM TUNING 5 / buttons (27)
4 DSP button and lamp (36)
5 FM/AM PRESET 5 / buttons (27, 28)
6 SURROUND/DSP OFF button (36)
7 FM MODE button (28)
8 MEMORY button (27)
9 Display window (16)
p EFFECT button (42)
q DIGITAL EQ (equalization) button (39)
w Remote sensor (15)
e LEVEL ADJUST button (41)
r SETTING button (21)
t MASTER VOLUME control (18)
y ANALOG DIRECT button and lamp (30)
u PHONES jack (18)
i SUBWOOFER OUT ON/OFF button (31)
o SURROUND button and lamp (36)
; USB AUDIO terminal (14)
a VIDEO input jacks (10)
s INPUT ANALOG/DIGITAL button (19)
INPUT ATT button (30)
d Source selecting buttons and lamps (16, 17, 19, 27, 28, 37)
DVD MULTI, DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS, PHONO,
CD, CDR, TAPE/MD, USB AUDIO, FM/AM
a;
o
u
2
1
34
5
7
8
w
9q y
i
s
d
6
h
prt
g
f
e
ANALOG
DIGITAL EQ INPUT ATT
SLEEP VOLUME
ONE TOUCH OPERATION
3D - PHONIC MIDNIGHT MODE
AUTO MUTING
TUNED STEREO
LINEAR PCM
DIGITAL
L
SUBWFR
LS RS
CR
S
SPEAKERS
LFE
DGTL AUTO DVD MULTI
PRO LOGIC
DSP
HEADPHONE
SB
12
CONTROL
DOWN UP
EFFECT SETTING
DIGITAL
EQ
TV SOUND/DBSVIDEOVCR 2VCR 1DVDDVD MULTI
DSP
S-VIDEO VIDEO
VIDEO
L—AUDIO—R
SURROUND
SUBWOOFER OUT ON/OFF
SPEAKERS ON/OFF
FM/AM TUNING FM/AM PRESET FM MODE
MEMORY
2
PHONES
STANDBY
USB AUDIO
SURROUND/DSP
OFF
FM / AMUSB AUDIOTAPE / MDCDRCDPHONO
LEVEL
ADJUST
RX-8020V
AUDIO/VIDEO CONTROL RECEIVER
ANALOG DIRECT
BASS BOOST
MASTER VOLUME
1
SOURCE NAME
SOURCE NAME
STANDBY/ON
INPUT
ANALOG/DIGITAL
INPUT ATT
S-VIDEO
VIDEO
VIDE
O
L—
AUDIO—R
U
S
B
A
U
D
IO
PUSH OPEN
EN01-15.RX-8020V[UJ]_f 02.5.22, 9:40 AM3
4
Remote Control
1 Remote control display window
2
buttons (16, 53 56)
CATV/DBS
, VCR1 , TV , AUDIO
3 Source selecting buttons (16, 17, 19, 27, 28, 37)
DVD, DVD MULTI, CD, FM/AM, TV/DBS, VIDEO, CDR, PHONO,
VCR1, VCR2, TAPE/MD, USB
4 SURROUND button (36)
5 DSP button (36)
6 ANALOG DIRECT button (30)
7 SOUND button (31, 39, 41)
8 DIMMER button (20)
9 MUTING button (20)
p CATV/DBS CONTROL button (55)
q TV/VIDEO button (53)
w TEXT DISPLAY button (45 48)
e MENU button (21, 29 31, 38)
r REC PAUSE button (52, 53, 55)
t SLEEP button (20)
y ANALOG/DIGITAL INPUT button (19)
u SURR (surround)/DSP OFF button (36)
i 10 keys for operating tuner (28)
10 keys for adjusting sound (31, 39, 41, 51)
10 keys for operating audio/video components (51 55)
o CH (channel) +/ buttons (53 55)
LEVEL +/ buttons (39, 41)
These buttons function only after pressing 10 keys which are marked with
an asterisk (*).
; VOLUME +/ buttons (18)
a TV VOL (volume) +/ buttons (53, 54)
s EXIT button (21, 29 31, 38, 40, 42, 45 47)
d TUNING UP /DOWN buttons (27)
On-screen operating buttons (21, 29 31, 38 40, 42, 45 48)
Operating buttons for audio/video components (52, 53, 55, 56)
f CONTROL button (51 53)
Remote Control
7
8
9
;
o
i
u
y
t
r
w
q
4
3
d
a
s
2
5
6
p
e
1
MENU
+
+
+
231
564
89
7/P
0
+10
10
BOOST
FRONTL
MENU
ENTER
FRONTR
BASS
TEST
CENTER
SUBWFR
DIMMER
DIGITAL EQ
SBACKL
SBACKR
SURRL
SURRR
MUTING
CH/
LEVEL
TV VOL
PLAY
STOP
/REW
DOWN TUNING UP
FF/
EXIT
VOLUME
CATV/DBS
CONTROL
TV/VIDEO
REC
PAUSE
SLEEP
PAUSE
SET
RETURN FM MODE 100
+
CONTROL
RM-SRX8020J
REMOTE CONTROL
CATV/DBS VCR1 TV AUDIO
DSP
OFF
DVD MULTI
USB
CD
CDR
TAPE/MD
TV/DBS VIDEO PHONO
FM/AM
VCR1 VCR2
SURROUND
SURR/DSP
ANALOG/DIGITAL
A/V CONTROL RECEIVER
INPUT
DIRECT
ANALOG
TEXT
DISPLAY
SOUND
DVD
f
Remote control display window
1
2
Remote control display window
1 Remote control operation mode display (16)
Remote control operation mode such as DVD, CD, SOUND, etc.
appears.
When the remote control operation mode changes, it is shown on the
display.
2 Signal transmission indicator
Lights up when transmitting the remote control signals.
EN01-15.RX-8020V[UJ]_f 02.5.22, 9:40 AM4
5
Getting Started
This section explains how to connect audio/video components and speakers to the receiver, and how to connect the
power supply.
Before Installation
General Precautions
Be sure your hands are dry.
Turn the power off to all components.
Read the manuals supplied with the components you are going to
connect.
Locations
Install the receiver in a location that is level and protected from
moisture.
The temperature around the receiver must be between 5˚C and
35˚C (23˚F and 95˚F ).
Make sure there is good ventilation around the receiver. Poor
ventilation could cause overheating and damage the receiver.
Handling the receiver
Do not insert any metal object into the receiver.
Do not disassemble the receiver or remove screws, covers, or
cabinet.
Do not expose the receiver to rain or moisture.
Checking the Supplied Accessories
Check to be sure you have all of the following items, which are
supplied with the receiver.
The number in the parentheses indicates quantity of the pieces
supplied.
Remote Control (1)
Batteries (2)
AM Loop Antenna (1)
FM Antenna (1)
AC Plug Adaptor (1)
If anything is missing, contact your dealer immediately.
Setting the Voltage Selector
Before connections, always do the following first if necessary.
Select the correct voltage in VOLTAGE SELECTOR on the rear by
using a screw driver. Check to be sure if the voltage mark is set to
the voltage for your area where this unit plugs in.
ANTENNA
AM
EXT
AM
LOOP
FM 75
COAXIAL
AM
LO
O
P
ANTENNA
AM
EXT
FM
75
C
O
A
XIA
L
AM
LO
O
P
ANTENNA
AM
EXT
FM
75
C
O
A
XIA
L
A. Using the Supplied FM Antenna
The FM antenna provided can be connected to the FM 75
COAXIAL terminal as temporary measure.
B. Using the Standard Type Connector (not supplied)
A standard type connector should be connected to the FM 75
COAXIAL terminal.
Note:
If reception is poor, connect the outdoor FM antenna (not supplied).
Before attaching a 75
coaxial cable (the kind with a round wire
going to an outdoor antenna), disconnect the supplied FM antenna.
B
FM Antenna (supplied)
Outdoor FM Antenna Cable (not
supplied)
Extend the supplied FM antenna horizontally.
A
Connecting the FM and AM Antennas
FM Antenna Connections
VOLTAGE SELECTOR
220V
230
-
240V
127V
110V
Voltage mark
EN01-15.RX-8020V[UJ]_f 02.5.22, 9:40 AM5
6
AM Antenna Connections
Turn the loop until you have
the best reception.
ANTENNA
AM
EXT
AM
LOOP
FM 75
COAXIAL
2
3
1
Notes:
If the AM loop antenna wire is covered with vinyl,
remove the vinyl by twisting it as shown in the
diagram.
Make sure the antenna conductors do not touch any other
terminals, connecting cords and power cord. This could cause poor
reception.
If reception is poor, connect an outdoor single vinyl-covered wire
(not supplied) to the AM EXT terminal. (Keep the AM loop antenna
connected.)
Connecting the Speakers
You can connect the following speakers:
Two pairs of front speakers to produce normal stereo sound.
One pair of surround speakers to enjoy the surround effect.
One surround back speaker or one pair of surround back speakers
to enjoy 6.1-channel sound reproduction.
One center speaker to produce more effective surround effect (to
emphasize human voices).
One subwoofer to enhance the bass.
IMPORTANT:
After connecting the speakers listed above, set the speaker
setting information properly to obtain the best possible
Surround and DSP effect. For details, see page 22.
CAUTION:
Use speakers with the SPEAKER IMPEDANCE indicated by the
speaker terminals.
Typical speaker layout
AM Loop Antenna
(supplied)
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop.
Outdoor single vinyl-covered wire (not supplied)
Left front speaker(s)
Right front speaker(s)
Left surround speakerLeft surround speaker
Right surround speaker
Subwoofer
Center speaker
Surround back speaker(s)
EN01-15.RX-8020V[UJ]_f 02.5.22, 9:40 AM6
10
Video component connections
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, the red plug to the
audio right jack, and the yellow plug to the video jack.
If your video components have S-video (Y/C-separation) and/or
component video (Y, P
B/CB, PR/CR) terminals, connect them using
an S-video cable (not supplied) and/or component video cable (not
supplied). By using these jacks, you can get a better picture
quality in the orderComponent video > S-video > Composite
video.
VCR(s)
VIDEO
FRONT
RIGHT
LEFT
DVD
TV SOUND
DBS
OUT
(REC)
IN
(PLAY)
VCR1
OUT
(REC)
IN
(PLAY)
VCR2
MONITOR
OUT
S-VIDEOVIDEO
AUDIO
A
B
D
E
F
A
B
E
F
D
C
C
Å To left/right audio output
ı To left/right audio input
Ç To composite video output
Î To S-video output
To composite video input
Ï To S-video input
S-VHS/VHS VCR
S-VHS/VHS VCR
S-VIDEO
VIDEO
VIDEO
LAUDIOR
To audio
output
To S-video
output
To composite
video output
When removing the cover
When attaching the cover
The VIDEO input jacks on the front panel are convenient when
connecting and disconnecting the equipment frequently.
When you do not use the terminals on the front panel, attach the
supplied front terminal cover to protect them from dust.
Video camera
S-VIDEO VIDEO
VIDEO
LAUDIOR
USB AUDIO
S
-V
ID
E
O
V
ID
E
O
V
ID
E
O
L
A
U
D
IO
R
U
SB
A
U
D
IO
PUSH OPEN
IMPORTANT:
This receiver is equipped with the following video jackscomposite
video, S-video and component video jacks. You can use any of the
three to connect a video component.
However, the video signals from one type of these input jacks are
output only through the video output jacks of the same type.
Therefore, if a recording video component and a playing video
component are connected to the receiver through the video jacks of
the different type, you cannot record the picture. In addition, if the TV
and a playing video component are connected to the receiver through
the video jacks of the different type, you cannot view the playback
picture on the TV.
EN01-15.RX-8020V[UJ]_f 02.5.22, 9:41 AM10
11
TV and/or DBS tuner
When connecting the TV to the AUDIO jacks
(TV SOUND/DBS), DO NOT connect the TVs video output
to these video input jacks.
VIDEO
FRONT
RIGHT
LEFT
DVD
TV SOUND
DBS
OUT
(REC)
IN
(PLAY)
VCR1
OUT
(REC)
IN
(PLAY)
VCR2
MONITOR
OUT
S-VIDEOVIDEO
COMPONENT VIDEO
MONITOR
OUT
DBS
DVD
Y
P
B
/C
B
P
R
/C
R
AUDIO
A
B
C
D
Å To audio output
ı To composite video input
Ç To S-video input
Î To component video input
VIDEO
FRONT
RIGHT
LEFT
DVD
TV SOUND
DBS
OUT
(REC)
IN
(PLAY)
VCR1
OUT
(REC)
IN
(PLAY)
VCR2
MONITOR
OUT
S-VIDEOVIDEO
COMPONENT VIDEO
MONITOR
OUT
DBS
DVD
Y
P
B
/C
B
P
R
/C
R
AUDIO
A
D
B
C
DBS
Å To audio output
ı To S-video output
Ç To component video output
Î To composite video output
Notes:
When connecting a DBS tuner to the TV SOUND/DBS jacks,
change the source name to DBS, which will be shown on the
display when it is selected as the source. See page 17 for details.
When connecting a DBS tuner to the component video input jacks,
make the component video input setting correctly. See pages 25
and 49 for details.
DBS tuner
Connect the TV to the
appropriate MONITOR
OUT jacks to view a
play-backing picture
from other connected
video components.
TV
EN01-15.RX-8020V[UJ]_f 02.5.22, 9:41 AM11
21
Basic Settings
Some of the following settings are required after connecting and positioning your speakers while others will make
operations easier.
When performing the basic settings, it is recommended to use the remote control so that you can show the
on-screen display on the TV.
When using the buttons on the front panel, you can perform the same settings. (The following on-screen display
cannot be shown if you use the buttons on the front panel.)
The on-screen display will disappear if no operation is done for about 1 minute.
Basic Procedure
Ex. When setting the subwoofer information
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1. Press SETTING repeatedly until
“SUB WOOFER” appears on the
display.
Each time you press the button, the setting items
change as follows.
For details about each setting item (1 to 9), see pages 22 to
26.
2. Press CONTROL UP 5 or
DOWN to select a setting you
want to use.
In this example, the subwoofer information is
set to “YES” to output bass sound through the
subwoofer.
Using the on-screen display (through the remote control):
1. Press MENU.
The MENU screen appears on
the TV.
2. Press 5 or to move to SETTING, then
press 2 or 3.
SETTING 1 menu showing setting items appears on the TV.
The item pointed by
is also shown on the display on the
unit.
3.
Press 5 or to move to
SUBWOOFER.
To go to the next screen, press continuously.
To go back to the previous screen, press 5 continuously.
For details about each setting item (1 to 9), see pages 22 to 26.
4. Press 2 or 3 to select
a setting you want to
use.
In this example, the
subwoofer information is set
to YES to output bass
sound through the
subwoofer.
5. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
On-screen operating
buttons
MENU
PLAY
STOP
/REW
DOWN – TUNING – UP
FF/
EXIT
PAUSE
SET
CONTROL
SETTING
ANALOG
VOLUME
L R
SPEAKERS
1
FRONT SPK:LARGE (1)
SUB WOOFER:NO (1)
SURR SPK:SMALL (1)
CNTR SPK:SMALL (1)
SBACK OUT:2SPK (1)
SBACK SPK:SMALL (1)
EX/ES:AUTO (2)
SURR CH:SURR (1)
FRONT DIST:3.0m (3)
DIST UNIT:meter (3)
SURR DIST:3.0m (3)
CNTR DIST:3.0m (3)
CROSS OVER:100Hz (4)
SBACK DIST:3.0m (3)
MID NIGHT:OFF (5)
LFE ATT:0dB (4)
2:CD 3:TV 4:CDR (6)
DGTL COAX 1:DVD (6)
VIDEO DBS:S/C (7)
VIDEO DVD:S/C (7)
FL DISP:TEXT (9)
ONE TOUCH:OFF (8)
(Back to the beginning)
CONTROL
DOWN UP
ANALOG
VOLUME
L
SUBWFR
R
SPEAKERS
1
NOTICE
Items shown on the on-screen display and on the front
panel display in this section are initial values when shipped
from the factory.
Some of the items cannot be shown or cannot be adjusted
according to currently selected settings. (For details, see
the respective explanation.)
SETTING 2 menu
1
2
SETTING 1 menu
6
7
8
9
SETTING 3 menu
3
4
5
EN21-26.RX-8020V[UJ]_f 02.5.22, 9:47 AM21
22
1 Setting the Speakers
To obtain the best possible surround sound from the Surround and
DSP modes, you have to register the setting about the speaker
arrangement after all connections are completed.
7
Subwoofer settingSUBWOOFER
[On-screen display] [Front panel]
Select whether you have connected a subwoofer or not.
YES : Select this when a subwoofer is connected.
NO : Select this when no subwoofer is used.
Note:
If you have selected NO for the subwoofer, you cannot use
SUBWOOFER OUT ON/OFF on the front panel.
7
Sizes for front speakers, center speaker, surround
speakers, and surround back speakers–—FRONT
SPK, CENTER (CNTR) SPK, SURR SPK, S BACK
(SBACK) SPK
[On-screen display] [Front panel]
Select the sizes for each connected speaker.
LARGE : Select this when the speaker size is relatively large.
SMALL : Select this when the speaker size is relatively small.
NONE : Select this when you have not connected a speaker.
(Not selectable for the front speakers)
Notes:
Keep the following comments in mind as reference when
adjusting.
If the size of the cone speaker unit built in your speaker is
larger than 12 cm (4
3
/
4
inches), select LARGE, and if it is
smaller than 12 cm (4
3
/
4
inches), select SMALL.
If you have selected NO for the subwoofer setting, you can
only select LARGE for the front speakers.
If you have selected SMALL for the front speakers, you
cannot select LARGE for the center, surround, and surround
back speakers.
If you have selected SMALL for the surround speakers, you
cannot select LARGE for the surround back speakers.
If you have selected NONE for the surround speakers, the
surround back speakers are fixed to NONE.
7
Surround back speakers quantityS BACK (SBACK)
OUT
[On-screen display] [Front panel]
Select the surround back speakers quantity.
2SPK : Select this to use 2 surround back speakers.
1SPK : Select this to use 1 surround back speaker.
Notes:
If you have selected NONE for the surround back speakers
(see the left), this setting cannot be available.
If you have selected 1SPK for the surround back speaker
quantity, connect the surround back speaker to the PRE OUT
SURR BACK L (left) jack.
7
Selecting surround speakers to useSURR CH (OUT)
[On-screen display] [Front panel]
Select the surround speakers to activate when playing back
5.1-multi-channel software.
SURR : Select this to use only the left and right
surround speakers.
SBACK : Select this to use only the surround back
speakers.
SURR+SBK : Select this to use both the surround speakers
(S+SBK) and surround back speakers.
Notes:
If you have selected NONE for the surround back speakers
(see the left), this setting is skipped.
If you have selected 1SPK for the surround back speaker
quantity, this setting is skipped. The surround channels signals
are output through the surround speakers.
This setting is ignored when performing 6.1-channel
reproduction.
EN21-26.RX-8020V[UJ]_f 02.5.22, 9:47 AM22
54
Operating Other Manufacturers Video Equipment
To change the transmittable signals for
operating another manufacturers TV
1. Press and hold TV .
2. Press TV/DBS.
CALL appears on the remote control display window.
3. Enter a manufacturers code using buttons 19,
and 0.
See the list below to find the code.
4. Release TV .
The following buttons can be used for operating the TV:
TV
:Turn on and off the TV.
TV VOL +/ :Adjust the volume.
TV/VIDEO :Set the input mode (either TV
or VIDEO).
After pressing TV/DBS, you can perform the following
operations on the TV:
CH +/ :Change the channels.
1 10, 0, 100+ (+10) :Select the channels.
The 10-key will function as the
ENTER button if your TV requires
pressing ENTER after selecting a
channel number.
Notes:
Refer also to the manual supplied with your TV.
All the functions listed above may not be assigned to the
buttons for some TVs.
If you cannot change the channels of some TVs by pressing
number buttons, press CH +/ for changing the channels.
5. Try to operate your TV by pressing TV .
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
MENU
+
+
+
231
564
89
7/P
0
+10
10
BOOST
FRONTL
MENU
ENTER
FRONTR
BASS
DIMMER
TEST
CENTER
SUBWFR
DIGITAL EQ
SBACKL
SBACKR
SURRL
SURRR
MUTING
CH/
LEVEL
TV VOL
PLAY
STOP
/REW
DOWN TUNING UP
FF/
EXIT
VOLUME
CATV/DBS
CONTROL
TV/VIDEO
REC
PAUSE
SLEEP
PAUSE
SET
RETURN FM MODE 100
+
CONTROL
RM-SRX8020J
REMOTE CONTROL
CATV/DBS VCR1 TV AUDIO
DSP
OFF
DVD MULTI
DVD
USB
CD
CDR
TAPE/MD
TV/DBS VIDEO PHONO
FM/AM
VCR1 VCR2
SURROUND
SURR/DSP
ANALOG/DIGITAL
A/V CONTROL RECEIVER
INPUT
DIRECT
ANALOG
TEXT
DISPLAY
SOUND
Note:
When you press one of the source selecting buttons, the
operation mode appears on the display window. For example,
the above illustration shows the remote control now works for
TV operation.
This remote control supplied with the receiver can transmit control
signals for other manufacturers TVs, CATV converters, DBS
tuners, VCRs and DVD players. By changing the transmittable
signals from preset ones to the other manufacturers, you can
operate the other manufacturers components using this remote
control.
When operating the other manufacturers components, refer also to
the manuals supplied with them. To operate these components with
the remote control, first you need to set the manufacturers codes for
each TV, CATV converters, DBS tuners VCR and DVD players.
After replacing batteries for the remote control, you need to set the
manufactures codes again.
Buttons Indications
TV/DBS TV
CATV/DBS CONTROL
CATV
VCR1 VCR1
DVD or DVD MULTI DVD
Manufacturers codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
Manufacturer Codes
JVC 00
*, 02, 13,
14, 47, 74
AKAI 01, 02
BLAUPUNKT 03, 04
FISHER 01, 05
GRUNDIG 03, 06, 07
HITACHI 08, 09, 10, 49
IRADDIO 02
ITT/NOKIA 11, 12
LOEWE 06, 15, 16
MAGNAVOX 08, 17, 49
METS 50, 51, 52, 53
MITSUBISHI 08, 18, 19, 20
MIVAR 21
NORDMENDE 22, 23
OKANO 15
PANASONIC 24, 25, 26, 27
76
PHILIPS 15, 17, 28, 75
QUELLE 52, 53, 54, 55,
56, 57, 58, 59,
60, 61, 62, 63,
64, 65, 66, 67
RCA/ 08, 24, 29, 30,
PROSCAN 31, 48
SABA 32, 33, 68, 69,
70
SAMSUNG 06, 08, 16, 34,
35, 49
SANYO 01, 05
SCHNEIDER 02, 15, 36
SHARP 37, 38, 77
SONY 39
TELEFUNKEN 40, 41, 42, 69
THOMSON 71, 72
TOSHIBA 37, 43, 44
ZENITH 45, 46
Manufacturer Codes
*Initial setting
EN49-60.RX-8020V[UJ]_f 02.5.22, 10:04 AM54
57

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC RX-8020VBK bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC RX-8020VBK in de taal/talen: Engels als bijlage per email.

De handleiding is 3,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info