546765
25
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
22
1 Setting the Speakers
To obtain the best possible surround sound from the Surround and
DSP modes, you have to register the setting about the speaker
arrangement after all connections are completed.
7
Subwoofer settingSUBWOOFER
[On-screen display] [Front panel]
Select whether you have connected a subwoofer or not.
YES : Select this when a subwoofer is connected.
NO : Select this when no subwoofer is used.
Note:
If you have selected NO for the subwoofer, you cannot use
SUBWOOFER OUT ON/OFF on the front panel.
7
Sizes for front speakers, center speaker, surround
speakers, and surround back speakers–—FRONT
SPK, CENTER (CNTR) SPK, SURR SPK, S BACK
(SBACK) SPK
[On-screen display] [Front panel]
Select the sizes for each connected speaker.
LARGE : Select this when the speaker size is relatively large.
SMALL : Select this when the speaker size is relatively small.
NONE : Select this when you have not connected a speaker.
(Not selectable for the front speakers)
Notes:
Keep the following comments in mind as reference when
adjusting.
If the size of the cone speaker unit built in your speaker is
larger than 12 cm (4
3
/
4
inches), select LARGE, and if it is
smaller than 12 cm (4
3
/
4
inches), select SMALL.
If you have selected NO for the subwoofer setting, you can
only select LARGE for the front speakers.
If you have selected SMALL for the front speakers, you
cannot select LARGE for the center, surround, and surround
back speakers.
If you have selected SMALL for the surround speakers, you
cannot select LARGE for the surround back speakers.
If you have selected NONE for the surround speakers, the
surround back speakers are fixed to NONE.
7
Surround back speakers quantityS BACK (SBACK)
OUT
[On-screen display] [Front panel]
Select the surround back speakers quantity.
2SPK : Select this to use 2 surround back speakers.
1SPK : Select this to use 1 surround back speaker.
Notes:
If you have selected NONE for the surround back speakers
(see the left), this setting cannot be available.
If you have selected 1SPK for the surround back speaker
quantity, connect the surround back speaker to the PRE OUT
SURR BACK L (left) jack.
7
Selecting surround speakers to useSURR CH (OUT)
[On-screen display] [Front panel]
Select the surround speakers to activate when playing back
5.1-multi-channel software.
SURR : Select this to use only the left and right
surround speakers.
SBACK : Select this to use only the surround back
speakers.
SURR+SBK : Select this to use both the surround speakers
(S+SBK) and surround back speakers.
Notes:
If you have selected NONE for the surround back speakers
(see the left), this setting is skipped.
If you have selected 1SPK for the surround back speaker
quantity, this setting is skipped. The surround channels signals
are output through the surround speakers.
This setting is ignored when performing 6.1-channel
reproduction.
EN21-26.RX-8020V[UJ]_f 02.5.22, 9:47 AM22
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC RX-8020VBK bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC RX-8020VBK in de taal/talen: Engels als bijlage per email.

De handleiding is 3,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info