512785
3
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
LT-26DA20J
©2010 Victor Company of Japan, Limited
0410TMH-VT-VT
50162791
INSTRUCTIONS
WIDE LCD PANEL TV
ENGLISH
If something doesn't seem to work
If there is something about your appliance which you do
not understand and you live in the UK you can
Phone our help line during normal office hours on:
0844 8009595
Calls are charged at standard rates.
We apologise for any inconvenience caused by minor
inconsistencies in these instructions, which may occur
as a result of product improvement and development.
Kesa U.K HU1 3AU 29 / 04 / 2008
䄰ㅟ孇䉝彍䈴㕍彃佖䕒弱〰㘷ㄹ㥟㔰ㄶ㈷㤱
〶⁎楳慮′〱〠卡泽‱㘺㌲㨳
English - 1 -
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic
compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Information for Users on Disposal of Old Equipment and Batteries
[European Union]
These symbols indicate that the electrical and electronic equipment and the battery with this
symbol should not be disposed of as general household waste at its end-of-life. Instead,
the products should be handed over to the applicable collection points for the recycling
of electrical and electronic equipment as well as batteries for proper treatment, recovery
and recycling in accordance with your national legislation and the Directive 2002/96/EC
and 2006/66/EC.
By disposing of these products correctly, you will help to conserve natural resources and
will help to prevent potential negative effects on the environment and human health which
could otherwise be caused by inappropriate waste handling of these products.
For more information about collection points and recycling of these products, please contact
your local municipal of ce, your household waste disposal service or the shop where you
purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
[Business users]
If you wish to dispose of this product, please con rm attached “KESA ELECTRICALS
SAFETY INSTRUCTIONS” to obtain information about the take-back of the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance with applicable national
legislation or other rules in your country for the treatment of old electrical and electronic
equipment and batteries.
Notice:
The sign Pb below
the symbol for
batteries indicates
that this battery
contains lead.
Products
Battery
Logo & License
HDMI, the HDMI Logo, and High-De nition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
DVB is a registered trademark of the DVB Project
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 1A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 1 08.04.2010 08:47:1108.04.2010 08:47:11
English - 2 -
Contents
IDTV Menu System .............................................. 13
Channel List ...................................................... 13
Timers ............................................................... 15
Conditional Access ........................................... 15
TV Setup ........................................................... 15
Setup ................................................................ 16
Analogue TV Menu System .................................. 19
Picture Menu..................................................... 19
Sound Menu ..................................................... 20
Feature Menu ................................................... 21
Install Menu ...................................................... 22
Source Menu .................................................... 23
PC Mode Menu System........................................ 23
PC Position Menu ............................................. 23
Displaying TV Information .................................... 24
Muting Function .................................................... 24
Freezing Picture ...................................................
24
Zoom Modes......................................................... 24
Auto .................................................................. 24
16:9 ................................................................... 24
4:3 ..................................................................... 25
Panoramic......................................................... 25
14:9 ................................................................... 25
Cinema ............................................................. 25
Subtitle .............................................................. 25
Zoom................................................................. 25
Teletext ................................................................. 25
Tips ....................................................................... 26
Image Persistence ............................................ 26
No Power .......................................................... 26
Poor Picture ...................................................... 26
No Picture ......................................................... 26
Sound ............................................................... 26
Remote Control................................................. 26
Input Sources.................................................... 26
Appendix A: PC Input Typical Display Modes ....... 27
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 28
Speci cations ....................................................... 29
Important Instruction ............................................. 30
Logo & License ....................................................... 1
Accessories ............................................................ 3
Features ................................................................. 3
Introduction ............................................................. 3
Preparation ............................................................. 3
Safety Precautions ................................................. 4
Power Source ..................................................... 4
Power Cord ......................................................... 4
Moisture and Water ............................................ 4
Cleaning.............................................................. 4
Heat and Flames ................................................ 4
Lightning ............................................................. 4
Replacement Parts ............................................. 4
Servicing ............................................................. 4
Waste Disposal ................................................... 4
Disconnecting the Device ................................... 4
Headphone Volume ............................................ 4
Installation........................................................... 4
LCD Screen ........................................................ 4
Warning .............................................................. 5
Inserting Batteries into the Remote Control Handset ..5
Operating Range for the Remote Control ............... 5
Overview of the Remote Control ............................ 6
LCD TV and Operating Buttons .............................. 7
Viewing the Connections- Back Connectors .......... 7
Viewing the Connections - Side Connectors .......... 8
Using the Cable Holder .......................................... 8
Power Connection .................................................. 8
Aerial Connection ................................................... 8
Connecting the LCD TV to a PC ............................. 9
Connecting to a DVD Player................................... 9
Using Side AV Connectors ................................... 10
Connecting Other Equipment via SCART ............ 10
Switching the TV On/Off ....................................... 10
To Switch the TV On ......................................... 10
To Switch the TV Off ......................................... 10
Input Selection ...................................................... 10
Basic Operations ...................................................11
Operation with the Buttons on the TV ................11
Initial Settings ........................................................11
General Operation ................................................ 12
Electronic Programme Guide (EPG) .................... 12
Displaying Subtitles .......................................... 12
Digital Teletext (** for UK only) ......................... 12
Analogue Teletext ............................................. 13
Widescreen ....................................................... 13
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 2A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 2 08.04.2010 08:47:1608.04.2010 08:47:16
English - 3 -
Accessories
Remote Controller
Batteries: 2 X AAA
Instruction Book
Quick Guide
Cable Holder
Features
• Remote controlled colour LCD TV.
• Fully integrated digital TV (DVB-T).
• HDMI connectors for digital video and audio. This
connection is also designed to accept high de nition
signals.
200 programmes from VHF, UHF(analogue).
500 programmes for digital mode (IDTV).
• OSD menu system.
SCART socket for external devices (such as video,
video games, audio set, etc.).
• Stereo sound system.
• Teletext, fastext, TOP text.
• Headphone connection.
Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer
.
• Child lock.
• Automatic sound muting when no transmission.
• NTSC playback.
A
VL (Automatic Volume Limiting).
• When no valid signal is detected, after 5 minutes the
TV switches automatically to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98,ME,2000,XP, Vista,
Windows7.
• Game Mode
Introduction
Thank you for choosing this product. This manual will
guide you for the proper operation of your
TV. Before operating the TV, please read
this manual thoroughly.
Please do keep this manual in a safe place
for future references.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top
of the set.
Use this device in moderate climates.
10 cm
10 cm
10 cm
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 3A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 3 08.04.2010 08:47:1608.04.2010 08:47:16
English - 4 -
ame sources, such as lighted candles, are placed
on top of the TV.
Warning
To prevent the spread of re, keep candles or other
open ames away from this product at all times.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are speci ed by the manufacturer or have the
same speci cations as the original one. Unauthorized
substitutions may result in re, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourself as this may result in an electric
shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
The LCD panel is a very high technology product with
about a million thin lm transistors, giving you ne
picture details. Occasionally, a few non-active pixels
Safety Precautions
Please read the following recommended
safety precautions carefully for your
safety.
Power Source
The main power supply for this TV is controlled by
inserting or removing the power plug.
The TV set should be operated only from a 220-240
V AC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the
power cord with wet hands as this could cause a short
circuit or electric shock. Never make a knot in the cord
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on. A damaged power cord can cause re or
give you an electric shock. When it is damaged and
needs to be replaced, it should be done by quali ed
personnel.
Make enough room for inserting and removing the
power plug.
Place the TV as close to the outlet as possible.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sink in the kitchen, and near the washing
machine). Do not expose this device to
rain or water, as this may be dangerous
and do not place objects lled with liquids,
such as ower vases, on top. Avoid from
dripping or splashing.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by quali ed personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid or
aerosol cleaners. Use soft and dry cloth.
Ventilation
The slots and openings on the TV set are intended for
ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or
covered in anyway.
Heat and Flames
The set should not be placed near to open
ames and sources of intense heat such
as an electric heater. Ensure that no open
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 4A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 4 08.04.2010 08:47:1908.04.2010 08:47:19
English - 5 -
may appear on the screen as a xed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning
Do not leave your TV in standby or operating mode
when you leave your house.
Inserting Batteries into the
Remote Control Handset
• Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right directions and
replace the battery cover.
Note: Remove the battery from remote control handset when
it is not to be used for a long period. Otherwise it can be
damaged due to any leakage of batteries.
Batteries should not be exposed to excessive heat
such as sunshine, re or the like.
Operating Range for the
Remote Control
• Point the top of the remote control toward the LCD
TV’s remote sensor LED while pressing a button.
Remote range is approximately 7m/23ft.
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 5A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 5 08.04.2010 08:47:2008.04.2010 08:47:20
English - 6 -
Overview of the Remote Control
TV/DTV1. : TV – Digital TV
OK2. : OK / Con rm / Freezing Picture(in
analogue mode) / Channel list (in DTV mode)
3. : Cursor left
MENU4. : Menu on-off
ZOOM5. : Image size
RED6. : Sound menu / Page Up (**) (in DTV
mode)
GREEN7. : Picture Menu / Page Down (**) (in
DTV mode)
AV8. : Source selection
9.
/ : Programme up / down
10. : Info
11. : Index Page (in TXT mode)
12. : Expand (in TXT mode)
13. : Hold (in TXT mode)
TV/RADIO14. : Switches between TV and radio
broadcasts.(in DTV mode)
15. : Standby
GUIDE16. : Programme guide
17. : Cursor up
18. : Cursor right
BACK19. : Return
20. : Cursor down
21. : Jump to now (in EPG mode)
BLUE22. : Install Menu / Favourite Mode (in DTV
mode) (*)
YELLOW23. : Feature Menu / Current Language
(in DTV mode) (*)
24. / : Volume up / down
25. : Muting
0,1...8,9 :Numeric buttons.26.
27. : Teletext on / PAT (Picture-and-text) /
Teletext off
28. : Reveal
29. : Time (in analogue mode)
30. : Subtitle on-off
31. : Mono-stereo / Dual I-II
(*) for EU countries only
(**) Scrolls page up or down in DTV Channel list.
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 6A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 6 08.04.2010 08:47:2208.04.2010 08:47:22
English - 7 -
LCD TV and Operating Buttons
FRONT and REAR VIEW Control Buttons
Standby button1.
TV/AV button2.
Programme Up/Down 3.
buttons
Volume Up/Down buttons4.
Note: Press “ ” /“
buttons at the same time to view main
menu.
Viewing the Connections- Back Connectors
SCART socket inputs or outputs for external devices.1.
Connect the SCART cable between SCART socket on TV and SCART socket on your external device
(such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket,
the TV will automatically switch to AV mode.
Note: S-VHS VCR should be connected to EXT-1 and can be
watched from EXT-1S source.
PC Input is for connecting a personal computer to the TV set. 2.
Connect the PC cable between the PC INPUT on the
TV and
the PC output on your PC. Please do not connect a device to
YPbPr socket while using PC input..
SPDIF3. Coaxial Out outputs digital audio signals of the
currently watched source.
RF Input connects to an antenna or a cable.4.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustration in the following
pages.
HDMI
5. 2: HDMI input
HDMI6. 1: HDMI input
HDMI Input is for connecting a device that has an HDMI
TM
connector.
Your LCD Television is capable of displaying High De nition pictures from devices such as a High
De nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI
TM
connector or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i,
1080p signals. No sound connection is needed for an HDMI to HDMI connection.
When you use the wall mount kit (optional) with the LCD TV, we would de nitely recommend to plug all your cables into the
back of the LCD before mounting to the wall.
SPDIF
SCART
VGA
Coax.OUT
HDMI 2
HDMI 1
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 7A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 7 08.04.2010 08:47:2508.04.2010 08:47:25
English - 8 -
Viewing the Connections -
Side Connectors
CI Slot is used for 1.
inserting a CI card. A
CI card allows you to
view all the channels
that you subscribe to.
For more information,
see “Conditional
Access” section.
Component Video 2.
Inputs (YPbPr) are
used for connecting
component video.
You can connect the
component video
and audio sockets
with a device that
has component
output. Connect the
component video
cables between the
COMPONENT VIDEO
INPUTS on on the
TV and the component video outputs of your
device. While connecting, be sure that the
letters on your TV, “Y”, “Pb”, “Pr” correspond
with your device’s connectors.
IMPORTANT:Please do not connect a device to
PC socket while using YPbPr input.
Video Input 3. (INPUT FAV) is used for connecting
video signals of external devices.Connect the
video cable between the VIDEO IN socket
on the
TV and the VIDEO OUT jack on your
device.
Audio Inputs 4. (INPUT FAV) are used for
connecting audio signals of external devices.
Connect the audio cable between the
AUDIO
INPUTS on the TV and the AUDIO OUTPUT
jacks on your device.
Also to enable PC/YPbPr sound connection
in such a case, use an appropriate audio cable
between the connected device’s audio outputs
and the TV’s audio inputs
Note: If you connect a device to the TV via the
VIDEO or PC/YPbPr cable you should also
connect your device with an audio cable to the
AUDIO INPUTS of the TV to enable audio.
Headphone jack is used for connecting an 5.
external headphone to the system. Connect to
the HEADPHONE jack to listen to the TV from
headphones.
Standby switch is used for turning the TV on 6.
or of
f.
INPUT AV
Using the Cable Holder
You can use the supplied cable holder as the
following:
• Place the cable holder into the cable holder hole
located on the rear side of the TV as illustrated
above.
• Place cables into the cable holder after all necessary
connections are made.
Power Connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the
ambient room temperature before you connect the
set to the mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL
INPUT socket located at the rear of the TV.
SPDIF
SCART
VGA
Coax.OUT
HDMI 2
HDMI 1
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 8A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 8 08.04.2010 08:47:2708.04.2010 08:47:27
English - 9 -
Connecting the LCD TV to a
PC
For displaying your computer’s screen image on
your LCD TV, you can connect your computer to the
TV set.
• Power off both computer and display before making
any connections.
• Use 15-pin D-sub display cable to connect a PC
to the LCD TV.Use an audio cable between audio
inputs of the TV (side) and audio output of your PC
to enable sound connection.
• When the connection is made, switch to PC source.
See “Input selection” section.
• Set the resolution that suits your viewing requirements.
Resolution information can be found in the appendix
parts.
SPDIF
SCART
VGA
Coax.OUT
HDMI 2
HDMI 1
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
PC RGB cable
(not supplied)
to PC input
Audio
Inputs
PC Input
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component
video cable to connect video input. To enable sound
connection, use AUDIO IN located side of the
TV
(YPbPr cable is not supplied).
• When the connection is made, switch to YPbPr
source. See, “Input selection” section.
• You may also connect through the SCART socket.
Use a SCART cable as shown below.
HDMI
input
Scart socket
Component
video
inputs
Component
audio
inputs
DVD Player
Note: These methods of connection perform the same
function but in different levels of quality. It is not necessary
to connect by all three methods.
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 9A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 9 08.04.2010 08:47:3008.04.2010 08:47:30
English - 10 -
Using Side AV Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• For connecting a camcorder, connect to the VIDEO
IN socket and the AUDIO SOCKETS. For selecting
the related source, see the section “Input selection”
in the following parts.
• To listen the TV sound from headphones, connect
to the HEADPHONE jack of theTV
Headphone
Connecting Other Equipment
via SCART
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to
your LCD TV by using the SCART socket. Note that
cables shown in the illustration are not supplied.
Power off both the TV and the devices before making
any connections.
For more information, refer to your device’s own
instruction book.
Note: S-VHS VCR should be connected to EXT-1 and can
be watched from EXT-1S source.
Scart socket
Decoder
DVD Recorder
Video Recorder
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240V AC 50
Hz.
• Switch the “
” button to position “|” so the TV will
switch to standby mode.
• To switch on the TV from standby mode either:
• Press the “
” button, / or a numeric button
on the remote control.
• Press the
or button on the TV.
The TV will then switch on and the standby LED
lights up.
Note : If you switch on your TV via PROGRAMME UP/DOWN
buttons on the remote control or on the TV set, the programme
that you were watching last will be reselected.
By either method the TV will switch on and the standby
LED lights up.
To Switch the TV Off
• Switch the “ button to position 2 as illustrated,
(
) so the TV will switch OFF.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, standby LED
can blink to indicate that features such as Standby Search,
Over Air Download or Timer is active.
Input Selection
Once you have connected external systems to your TV,
you can switch to different input sources.
• Press “AV” button on your remote control for directly
changing sources.
or
• Select “Source” option from the main menu by
using “
” or “ ” button. Use then “ ” or
” button to highlight an input and press “ ” button
to select.
Note: You can mark desired source options by pressing the OK
button. Therefore, when
AV button is pressed, only the marked
source options will be available (except for the TV source).
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 10A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 10 08.04.2010 08:47:3208.04.2010 08:47:32
English - 11 -
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press “ ” button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
• Press “ ” button to select the next programme or
” button to select the previous programme.
Viewing Main Menu
• Press “ ” / “ ” buttons at the same time
to view main menu. In the Main menu select sub-
menu using “
” or “ ” buttons and enter the
sub-menu using “ ” or “ ” buttons. To
learn the usage of the menus, refer to the menu
system sections.
AV Mode
• Press the “TV/AV” button in the control panel on the
TV to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press “ ” button to increase the volume. Press
” button to decrease the volume. A volume
level scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “ ” button to select the previous programme.
• Press “ ” button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between 10-500 (for IDTV) or 10-199 (for analogue),
press the numeric buttons consecutively
• Press directly the programme number to reselect
single digit programmes
Initial Settings
When the TV is turned on for the rst time, the menu
for the language selection appears on the screen. The
message “Welcome please select your language!”
is displayed in all language options sequentially in
the OSD.
By pressing the “
” or “ ” buttons highlight the
language you want to set and press OK button. After
then, “First time installation” OSD will appear on the
screen. By pressing “
” or “ ” buttons, select the
country you want to set and press OK button (* for
EU countries).
Note: Country selection OSD will not be available for UK.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
• To select the “Yes” or “No” option, highlight the item
by using “ ” or “ ” buttons and press the “OK”
button.
The IDTV will automatically tune to the UHF or VHF(*)
(* for EU countries) transmission channels, searching
for digital terrestrial TV broadcasts and displaying the
names of channels found. This process will take about
a few minutes.
After Automatic Search is completed, the following
message asking for analogue channel search appears
on the screen:
To search for analogue channels, select “Yes”. TV
switches to the analogue TV mode. The menu is
displayed to search for analogue channels.
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 11A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 11 08.04.2010 08:47:3308.04.2010 08:47:33
English - 12 -
Select your Country, Language and Text language by
using “ ” or “ ” and “ ” or “ ” buttons. Press OK or
RED button to continue. To cancel, press the BLUE
button.
For more information on this process, see “Install Menu”
section.
Note: For proper functioning of digital teletext in DTV mode, you
should set country as UK in analogue AUTO PROGRAM (for UK
broadcasts only).
Do not turn off the TV while initializing rst time installation.
General Operation
Press the “TV/DTV” button on the remote control and
select DTV to switch the TV set to digital terrestrial
television broadcasting.
Information Banner
• Whenever you change the channel using the /
button or numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen. This will remain on the
screen for approximately a few seconds.
• The information banner can also be displayed by
pressing the
button at any time while watching
the TV. Pressing
button again removes the
banner.
If the selected channel is locked, you must enter the
correct four numeric code to view the channel. “Enter
PIN” will be displayed on the screen in such a case:
Electronic Programme Guide (EPG)
• Some, but not all, channels send information about
the current and next events. Press GUIDE button to
view the EPG menu. EPG appears on the screen. It
is able to get Information of the channel - programs
weekly by means of 7-DAY-EPG. All programs of
channels are displayed. On the bottom of the screen;
info bar, showing all the available commands, will
be displayed.
RED button (Shrink): makes the info boxes smaller.
GREEN button (Expand): makes the info boxes larger.
YELLOW button (Prev. Day): displays the programmes
of previous day.
BLUE button (Next day): displays the programmes of
the next day.
(Details): displays the programmes in detail.
Numeric buttons (Jump): go to preferred channel
directly via numeric buttons.
OK : view for current broadcast/reminders for future
programs.
: jumps to the current broadcast.
• Press “0” button on the remote control to view Guide
Search menu. Using this feature, you can search the
programme guide database in accordance with the
genre selected or with name match.
Displaying Subtitles
With digital terrestrial broadcasting (DVB-T), some
programmes are being broadcasted with subtitles.
Press the “MENU” button to display the main menu,
highlight the Setup and then Language menu using “
” or “ ” button and press the OK button to display the
“Language settings” menu.
Highlight the “Subtitle” item in “Language settings”
menu and use
” or “ button to set Subtitle to the
desired language.
If “Subtitle” is on and a language option is set, pressing
the “
” button causes the following warning message
display on the screen (** for UK only):
Digital Teletext (** for UK only)
• Press the “ ” button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
• When Press “OK” button or similar message appears
on the screen, press the OK button.
• When the “
” button is pressed, the TV returns to
television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in
addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 12A01_[GB]_MB45M_26741W_(RM-C2503-1C_UK)_IDTV_NICKEL13_10067199_50162791.indd 12 08.04.2010 08:47:3408.04.2010 08:47:34
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC LT-26DA20J bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC LT-26DA20J in de taal/talen: Engels als bijlage per email.

De handleiding is 1,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info