Handleiding JVC KDMX3000R (pagina 6 van 54) (Engels)

28912

Verklein

Vergroot

Pagina terug

1/54

Pagina verder

MD/CD RECEIVER

RECEPTEUR MD/CD

MD/CD RECEIVER

INSTRUCTIONS

VNN3873-312

[E]

d in Japan

MNMMDWOZK

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

For installation and connections, refer to the separate manual.

Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesonderten Anleitung.

Pour l’installtion et les raccordements, se référer au manuel séparé.

Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het toestel.

Detachable

KD-MX3000R

PTY

SOUND

RND

RPT

RDS

DISP

MD / CD RECEIVER

SSM

8 9 10 11 12

40W

EXT/CH

FM/AM

MD/CD

/I/ATT

KD-MX3000R

SEL

NEDERLANDS

DEUTSCHFRANÇAIS ENGLISH

RM-RK25

KD-MX3000R[312]COVER 7/28/98, 5:58 PM3

Position And Reproduction Of Labels

IMPORTANT FOR LASER

PRODUCTS

Precautions:

1. CLASS 1 LASER PRODUCT

2. DANGER: Invisible laser radiation when

open and interlock failed or defeated. Avoid

direct exposure to beam.

3. CAUTION: Do not open the top cover.

There are no user-serviceable parts inside.

Leave all servicing to qualified service

personnel.

4. CAUTION: This CD player uses invisible

laser radiation and is equipped with safety

switches to prevent radiation emission

when unloading CDs. It is dangerous to

defeat the safety switches.

5. CAUTION: Use of controls, adjustments or

performance of procedures other than

those specified herein may result in

hazardous radiation exposure.

Note:

For security reasons, a numbered ID card is provided with this unit, and the same ID number is

imprinted on the unit’s chassis. Keep the card in a safe place, as it will help the authorities to

identify your unit if stolen.

CAUTION on Volume Setting

CDs and MDs produce very little noise compared with other sources. If the volume level is adjusted

for the tuner, for example, the speakers may be damaged by the sudden increase in the output level.

Therefore, lower the volume before playing a disc and adjust it as required during playback.

WARNING LABEL, PLACED INSIDE THE UNIT

Bottom panel of the main unit

Caution:

This product contains a laser component

of higher laser class than Class 1.

CLASS 1

LASER PRODUCT

Name/Rating plate

DANGER: Invisible laser

radiation when open and

interlock failed or defeated.

AVOID DIRECT EXPOSURE

TO BEAM. (e)

ADVARSEL: Usynlig laser-

stråling ved åbning, når

sikkerhedsafbrydere er ude

af funktion. Undgåudsæt-

telse for stråling. (d)

VARNING: Osynlig laser-

strålning när denna del

är öppnad och spärren är

urkopplad. Betrakta ej

strålen. (s)

VARO: Avattaessa ja suo-

jalukitus ohitettaessa olet

alttiina näkymättömälle

lasersäteilylle. Älä katso

säteeseen. (f)

EN 02-05 KD-MX3000R [E]/2 7/27/98, 4:12 PM2

ENGLISH

Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to

ensure your complete understanding and to obtain the best possible performance from the unit.

CONTENTS

BASIC OPERATIONS ....................................................5

RADIO BASIC OPERATIONS .........................................6

Listening to the radio ..................................................................... 6

Storing stations in memory ............................................................7

FM station automatic preset: SSM ............................................... 7

Manual preset.............................................................................. 8

Tuning into a preset station ........................................................... 9

Selecting FM reception sound ....................................................... 9

RDS OPERATIONS .....................................................10

What you can do with RDS EON ................................................ 10

Tracing the same programme automatically (Network-Tracking

Reception) ................................................................................. 10

Using Standby Reception.......................................................... 12

Selecting Your Favorite Programme for PTY Standby Reception .... 13

Searching Your Favorite Programme ............................................ 13

Other convenient RDS functions ................................................. 16

Automatic selection of the station when using the number buttons.. 16

Changing the display mode while listening to an FM station ..... 16

Setting the TA volume level ........................................................16

Automatic clock adjustment .......................................................17

CD OPERATIONS.......................................................19

Playing a CD ................................................................................. 19

Locating a track or a particular portion on a CD ..................... 20

Selecting CD playback modes......................................................21

Prohibiting CD ejection ............................................................... 22

MD OPERATIONS......................................................23

Playing an MD ..............................................................................23

Locating a track or a particular portion on an MD .................. 24

Selecting MD playback modes..................................................... 25

Prohibiting MD ejection...............................................................26

SOUND ADJUSTMENTS .............................................27

Selecting preset sound control modes ......................................... 27

Adjusting the sound...................................................................... 28

Storing your own sound adjustments ......................................... 29

BEFORE USE

* For safety....

• Do not raise the volume level too much, as this

will block outside sounds, making driving

dangerous.

• Stop the car before performing any complicated

operations.

* Temperature inside the car....

If you have parked the car for a long time in hot

or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

CONTINUED TO THE NEXT PAGE

EN 02-05 KD-MX3000R [E]/2 7/27/98, 4:12 PM3

OTHER MAIN FUNCTIONS .........................................30

Setting the clock............................................................................ 30

Changing the general settings (PSM) .........................................31

Selecting 24-hour or 12-hour clock ............................................33

Selecting the level display ......................................................... 33

Selecting the dimmer mode .......................................................33

Controlling the volume automatically (Audio Cruise Mode) ....... 34

Selecting the telephone muting ..................................................36

Turning on or off the key-touch tone ..........................................36

Turning on or off the power amplifier switch ..............................36

Adjusting the contrast level ........................................................37

Selecting the scroll mode .......................................................... 37

Assigning names to the sources ...................................................38

Detaching the control panel .........................................................41

REMOTE OPERATIONS............................................... 42

Installing the batteries..................................................................42

Using the remote controller .........................................................43

CD CHANGER OPERATIONS ......................................44

Playing CDs ...................................................................................44

Selecting CD playback modes...................................................... 46

Playing the CD Text......................................................................47

EXTERNAL COMPONENT OPERATIONS ..................... 48

MAINTENANCE......................................................... 49

Handling Discs ..............................................................................49

Taking care of CDs .................................................................... 49

Taking care of MDs.................................................................... 50

Moisture condensation .............................................................. 50

TROUBLESHOOTING .................................................51

SPECIFICATIONS .......................................................53

When this unit malfunctions or does not operate:

Press the reset button on the front panel

using a ball-point pen or a similar tool. If

this does not work, contact your JVC IN-

CAR ENTERTAINMENT dealer.

EN 02-05 KD-MX3000R [E]/2 7/27/98, 4:12 PM4

ENGLISH

BASIC OPERATIONS

Note:

When you use this unit for the

first time, set the built-in

clock correctly, see page 30.

Turn on the power.

Select the source.

To operate the tuner, see pages 6 – 18.

To operate the CD player, see pages 19 – 22.

To operate the MD player, see pages 23 – 26.

To operate the CD changer, see pages 44 – 47.

To operate an external component, see page 48.

Note on One-Touch Operation:

When you select a source in step 2 below, the power automatically comes on.

You do not have to press this button to turn on the power.

Volume level appears.

/I/ATT

Adjust the volume.

Adjust the sound as you want (see pages 27 – 29).

To drop the volume in a moment

Press briefly while listening to any source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the button briefly again.

To turn off the power

Press for more than 1 second.

Volume level indicator

(see page 33).

FM/AM MD/CDEXT/CH

EN 02-05 KD-MX3000R [E]/2 7/27/98, 4:13 PM5

RADIO BASIC OPERATIONS

Listening to the radio

Select the band (FM1, FM2, FM3 or AM).

You can select any one of FM1, FM2, and FM3 to listen to an

FM station.

Start searching a station.

When a station is received, searching stops.

To stop searching before a station is received, press the same button you have pressed

for searching.

To tune in a particular frequency without searching:

1 Press FM/AM repeatedly to select the band (FM or AM).

2 Press and hold ¢

or 4

until “M” (for Manual) starts flashing on the display.

Now you can manually change the frequency while “M” is flashing.

3 Press ¢

or 4

repeatedly until the frequency you want is reached.

• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and

9kHz intervals for AM–MW/LW) until you release the button.

Selected band appears.

To search stations

of lower

frequencies.

To search stations

of higher

frequencies.

(FM1)

(FM2)

(FM3)

SSM

FM/AM

EN 06-12 KD-MX3000R [E]/2 7/27/98, 4:12 PM6

ENGLISH

Select the FM band number (FM1, FM2 or

FM3) you want to store FM stations into.

Press and hold both buttons for more than

3 seconds.

Local FM stations with the strongest signals are searched and stored automatically in the

band number you have selected (FM1, FM2 or FM3). These stations are preset in the number

buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).

When automatic preset is over, the station stored in number button 1 will be automatically

tuned in.

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)

• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).

FM/AM

(FM1)

(FM2)

(FM3)

“SSM” appears, then disappears when

automatic preset is over.

SSM

EN 06-12 KD-MX3000R [E]/2 7/27/98, 4:12 PM7

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.

EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band

Select the FM1 band.

Tune into a station of 88.3 MHz.

See page 6 to tune into a station.

Press and hold the number button (in this

example, 1) for more than 2 seconds.

Repeat the above procedure to store other stations into other

preset numbers.

Notes:

• A previously preset station is erased when a new station is stored in the same preset number.

• Preset stations are erased when the power supply to the memory circuit is interrupted (for example,

during battery replacement). If this occurs, preset the stations again.

FM/AM

SSM

Preset number and “MEMO”

flash alternately for a while.

EN 06-12 KD-MX3000R [E]/2 7/27/98, 4:12 PM8

ENGLISH

Tuning into a preset station

You can easily tune into a preset station.

Remember that you must store stations first. If you have not stored them yet, see pages 7

and 8.

Select the band (FM1, FM2, FM3 or AM) you

want.

Select the number (1 – 6) for the preset station

you want.

To change the display information while receiving an FM RDS

station

Press DISP. Each time you press the button, the display changes as follows:

DISP

Selecting FM reception sound

When an FM stereo broadcast is hard to receive:

Press MO/RPT (Mono/Repeat) while listening to an FM stereo broadcast. “MONO” appears

on the display and the sound you hear becomes monaural but reception will be improved.

To restore the stereo effect, press the same button again.

2 1

FM/AM

789101112

RPT

Lights up when receiving an FM broadcast in stereo.

Station Frequency

PS (Station name)

PTY (Programme type)

EN 06-12 KD-MX3000R [E]/2 7/27/98, 4:12 PM9

What you can do with RDS EON

RDS OPERATIONS

RDS (Radio Data System) allows FM stations to send an additional signal along with their

regular programme signals. For example, the stations send their station names, as well as

information about what type of program they broadcast, such as sports or music, etc.

Another advantage of RDS function is called “EON (Enhanced Other Networks).” The EON

indicator lights up while receiving an FM station with the EON data. By using the EON data

sent from a station, you can tune into a different station of a different network broadcasting

your favorite programme or traffic announcement while listening to another programme or to

another source such as CD.

By receiving the RDS signals, this unit can do the following:

• Tracing the same programme automatically (Network-tracking Reception)

• Standby Reception of TA (Traffic Announcement) or your favorite programme

• PTY (Program Type) search

• TA (Traffic Announcement) search

• And some other functions

Tracing the same programme automatically (Network-

Tracking Reception)

When driving in an area where FM reception is not good, the tuner built in this unit automatically

tunes in another RDS station, broadcasting the same programme with stronger signals. So,

you can continue to listen to the same programme in its finest reception, no matter where you

drive. (See illustration.)

Two types of the RDS signals are used to make Network-Tracking Reception work correctly

— PI (Programme Identification) and AF (Alternative Frequency) data.

Without receiving these data correctly from the RDS station you are listening to, Network-

Tracking Reception will not operate.

To use Network-Tracking Reception, press and hold TP/RDS (Traffic

Programme/Radio Data System) for more than 1 second. Each time you

press and hold the button, Network-Tracking Reception modes change as

follows:

RDS

Mode 1 Mode 2 Mode 3

EN 06-12 KD-MX3000R [E]/2 7/27/98, 4:12 PM10

ENGLISH

Mode 1 (AF:on / REG:off)

Network-Tracking is activated with Regionalization set to “off.”

Switches to another station within the same network when the receiving

signals from the current station become weak.

Note:

In this mode, the programme may differ from the one currently received.

Mode 2 (AF:on / REG:on)

Network-Tracking is activated with Regionalization set to “on.”

Switches to another station, within the same network, broadcasting the same

programme when the receiving signals from the current station become weak.

Mode 3 (AF:off / REG:off)

Network-Tracking is deactivated.

The same programme can be received on different frequencies.

Programme 1 broadcasting on

frequency B

Programme 1 broadcasting

on frequency A

Programme 1 broadcasting on frequency D

Programme 1 broadcasting on frequency C

Programme 1 broadcasting on frequency E

EN 06-12 KD-MX3000R [E]/2 7/27/98, 4:12 PM11

Using Standby Reception

Standby Reception allows the unit to switch temporarily to your favorite programme (PTY:

Programme Type) and Traffic Announcement (TA) from the current source (another FM station,

MD, CD, and other connected components).

Note:

Standby Reception will not work if you are listening to an AM station.

TA Standby Reception

• When TP/RDS is pressed briefly in the FM mode, the TP indicator is lit

during reception of a TP station and the TA standby mode is engaged.

Note:

When the station being received is not a TP station, the TP indicator flashes. Press

or 4 to engage the TA standby mode. “SEARCH” appears on the

display, and TP station search starts. When a TP station is tuned in, the TP indicator

is lit.

• If you are listening to a CD or an MD, and wish to hear a TA broadcast,

press TP/RDS to enter the TA standby mode. (The TP indicator lights up.)

If a TA programme starts broadcasting while the TA standby mode is active,

“TRAFFIC” appears and the FM mode is engaged. The volume increases to

the preset “TA VOLUME” level and the TA programme can be heard (see

page 16).

Note:

To deactivate the TA standby mode, press TP/RDS again.

PTY Standby Reception

• When PTY is briefly pressed in the FM mode, the PTY indicator is lit during

reception of a PTY station and the PTY standby mode is engaged. The

selected PTY name stored on page 13 flashes for 5 seconds.

Note:

When the station being received is not a PTY station, the PTY indicator flashes.

Press ¢

or 4 to engage the PTY standby mode. “SEARCH” appears on

the display, and PTY station search starts. When a PTY station is tuned in, the PTY

indicator is lit.

• If you are listening to a CD or an MD, and wish to hear a selected PTY

broadcast, press PTY to enter the PTY standby mode. (The PTY indicator

lights up.)

If the PTY starts broadcasting while the PTY standby mode is active, the

selected PTY name appears and the FM mode is engaged. The selected

PTY can then be heard.

Note:

To deactivate the PTY standby mode, press PTY again.

RDS

PTY

EN 06-12 KD-MX3000R [E]/2 7/27/98, 4:12 PM12

ENGLISH

Selecting Your Favorite Programme for PTY Standby

Reception

You can select your favorite programme for PTY Standby Reception to store in memory.

When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby

Reception.

POP M

CLASSICS

AFFAIRS

VARIED

ROCK M

EASY M

Press and hold the button for more than 2

seconds to call up the Preferred Setting Mode

(PSM: see page 31).

Select “PTY STANDBY” if not shown on the

display.

Select one of twenty-nine PTY codes. (See

the table on page 18.)

Selected code name appears on the display and is stored

into memory.

Finish setting.

Searching Your Favorite Programme

You can search one of your 6 favorite programme types stored in memory.

When shipped from the factory, the following 6 programme types have been stored in the

number buttons (1 to 6).

To change the factory preset settings, see page 14.

To search your favorite programme, see page 15.

SEL

SSM

SEL

1, 4

EN 13-18 KD-MX3000R [E]/2 7/27/98, 4:11 PM13

To store your favorite programme types

SEL

Press and hold the button for more than 2

seconds to call up the Preferred Setting Mode

(PSM: see page 31).

Select “PTY SEARCH” if not shown on the

display.

Select one of twenty-nine PTY codes. (See

the table on page 18.)

Selected code name appears on the display.

• If the code already stored in memory is selected, it will

flash on the display.

Press and hold the number button for more than 2 seconds to

store the PTY code selected into the preset number you want.

PTY preset number appears, and selected code name and “MEMORY” alternate on

the display.

Finish setting.

SEL

SSM

789101112

1, 5

EN 13-18 KD-MX3000R [E]/2 7/27/98, 4:11 PM14

ENGLISH

To search your favorite programme type

Press and hold the button for more than 1

second while listening to an FM station.

The last selected PTY code and preset number appear.

Select one of PTY codes stored in the preset

number buttons (1 to 6).

PTY search for your favorite programme starts after 5

seconds.

• If there is a station broadcasting a programme of the same PTY code you selected, that

station is tuned in.

• If there is no station broadcasting a programme of the same PTY code you selected, the

station will not change.

Note:

In some areas, the PTY search will not work correctly.

PTY

789101112

Ex. When “CLASSICS” is stored in preset number button 2.

EN 13-18 KD-MX3000R [E]/2 7/27/98, 4:11 PM15

Other convenient RDS functions

Automatic selection of the station when using the number

buttons

Usually when you press the number button, the preset station is tuned in.

However, when the preset station is an RDS station, something different will happen. If the

signals from that preset station are not sufficient for good reception, this unit starts searching

another station broadcasting the same programme as the original preset station is broadcasting,

then if any station broadcasting the same programme is found, the station will be tuned in.

Changing the display mode while listening to an FM

station

You can change the initial indication on the display to either station name (PS) or to station

frequency, while listening to an FM RDS station.

• See also “Changing the general settings (PSM)” on page 31.

1. Press and hold SEL (select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “DISPLAY MODE” with ¢

or 4 .

3. Set to the desired indication (either station name or station frequency) with the control dial.

Note:

By pressing DISP, you can also change the display while listening to an FM RDS station.

Each time you press the button, the display changes to show the following:

Setting the TA volume level

You can preset the volume level for TA Standby Reception. When a traffic programme is

received, the volume level automatically changes to the preset level.

• See also “Changing the general settings (PSM)” on page 31.

1. Press and hold SEL (select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “TA VOLUME” with ¢

or 4 .

3. Set to the desired volume level with the control dial.

Station Frequency

PS (Station name)

PTY (Programme type)

EN 13-18 KD-MX3000R [E]/2 7/27/98, 4:11 PM16

ENGLISH

Automatic clock adjustment

When shipped from the factory, the clock built in this unit is set to be readjusted automatically

using the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock adjustment, follow the procedure below.

• See also “Changing the general settings (PSM)” on page 31.

1. Press and hold SEL (select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “AUTO ADJUST” with ¢

or 4 .

3. Select “ADJUST OFF” by turning the control dial counterclockwise.

Now automatic clock adjustment is canceled.

To reactivate clock adjustment, repeat the same procedure and select “ADJUST ON” in

step 3 by turning the control dial clockwise.

Note:

It takes about 2 minutes to adjust the time using the CT data. So, you must tune to the station for more

than 2 minutes continuously; otherwise, the clock time will not be adjusted.

EN 13-18 KD-MX3000R [E]/2 7/27/98, 4:11 PM17

PTY codes

Descriptions of the PTY Codes

NEWS: News

AFFAIRS: Topical programmes

expanding on current news or

affairs

INFO: Programmes which impart

advice on a wide variety of

topics.

SPORT: Sport events

EDUCATE: Educational programmes

DRAMA: Radio plays

CULTURE: Programmes on national or

regional culture

SCIENCE: Programmes on natural

science and technology

VARIED: Other programmes like

comedies or ceremonies

POP M: Pop music

ROCK M: Rock music

EASY M: Easy-listening music

LIGHT M: Light music

CLASSICS: Classical music

OTHER M: Other music

WEATHER: Weather information

FINANCE: Reports on commerce,

trading, the Stock Market,

etc.

CHILDREN: Entertainment programmes

for children

SOCIAL: Programmes on social

activities

RELIGION: Programmes dealing with any

aspect of belief or faith, or the

nature of existence or ethics

PHONE IN: Programmes where people

can express their views either

by phone or in a public forum

TRAVEL: Programmes about travel

destinations, package tours,

and travel ideas and

opportunities

LEISURE: Programmes concerned with

recreational activities such as

gardening, cooking, fishing,

etc.

JAZZ: Jazz music

COUNTRY: Country music

NATION M: Current popular music from

another nation or region, in

that country’s language

OLDIES: Classic pop music

FOLK M: Folk music

DOCUMENT: Programmes dealing with

factual matters, presented in

an investigative style

No.

Indications on

the display

Indications on

the display

WEATHER

NEWS

AFFAIRS

INFO

SPORT

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

POP M

ROCK M

EASY M

LIGHT M

CLASSICS

OTHER M

FINANCE

CHILDREN

SOCIAL

RELIGION

PHONE IN

TRAVEL

LEISURE

JAZZ

COUNTRY

NATION M

OLDIES

FOLK M

DOCUMENT

EN 13-18 KD-MX3000R [E]/2 7/27/98, 4:11 PM18

ENGLISH

CD OPERATIONS

1. Insert a CD into the loading slot.

The unit turns on, draws the CD and starts playback

automatically.

2. Close the control panel by hand.

Open the control panel.

If there is already a CD or an MD inside the unit,

it ejects automatically.

Playing a CD

Elapsed

playing timeCurrent track

Total playing time of

the inserted disc

Total track number

of the inserted disc

Note:

When a CD is inserted up side down, “PLEASE EJECT” appears on the display.

When you open the control panel by pressing 0, the CD automatically ejects.

To stop play and eject the CD

Press 0.

CD play stops, the control panel opens, then the CD automatically ejects from the loading slot.

If you change the source to FM/AM, CD changer or external component, the CD play also

stops (without ejecting the CD this time).

Notes:

• If the ejected disc is not removed for about 15 seconds , the disc is automatically inserted again into

the loading slot to protect it from dust. (CD play will not start this time.)

• You can eject the CD even when the unit is turned off.

• You cannot insert a CD and an MD inside the unit at the same time.

To show the assigned name while the elapsed playing time

appears

Press DISP. Each time you press the button, elapsed playing time and assigned name ( see

page 38) appear alternately on the display.

• See also “Selecting the scroll mode” on page 37.

Note on One-Touch Operation:

When a CD is already in the loading slot, pressing MD/CD turns on the unit and starts playback

automatically.

EN 19-22 KD-MX3000R [E]/2 7/27/98, 5:30 PM19

To fast forward or reverse the track

Press and hold ¢

, while playing a CD, to fast forward the track.

Press and hold 4

, while playing a CD, to reverse the track.

To go to the next track or the previous track

Press ¢

briefly, while playing a CD, to go ahead to the beginning of

the next track. Each time you press the button consecutively, the beginning

of the next track is located and played back.

Press 4

briefly, while playing a CD, to go back to the beginning of the

current track. Each time you press the button consecutively, the beginning

of the previous track is located and played back.

To go to a particular track directly

Press the number button corresponding to the track number to start its

playback.

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1 second.

Locating a track or a particular portion on a CD

SSM

789101112

Number buttons¢

EN 19-22 KD-MX3000R [E]/2 7/27/98, 5:30 PM20

ENGLISH

Selecting CD playback modes

To play back tracks at random (Random Play)

You can play back all tracks on the CD at random.

Each time you press RND (Random) while playing a CD, CD random play

mode turns on and off alternately.

When the random mode is turned on, the RND indicator lights up on the

display and a track randomly selected starts playing.

• To select the next track at random, press ¢

briefly.

To play back tracks repeatedly (Repeat Play)

You can play back the current track repeatedly.

Each time you press MO/RPT (Mono/Repeat) while playing a CD, CD repeat

play mode turns on and off alternately.

When the repeat mode is turned on, the RPT indicator lights up on the

display.

Track number of the currently playing track

RND

RPT

RND

MO/RPT

EN 19-22 KD-MX3000R [E]/2 7/27/98, 5:30 PM21

Prohibiting CD ejection

You can prohibit the CD ejection and can “lock” a CD in the loading slot.

While pressing MD/CD, press

for more than 2 seconds. “NO EJECT” flashes on the

display for about 5 seconds, and the CD is “locked” and cannot be ejected.

MD/CD

To cancel the prohibition and “unlock” the CD, press again for more than 2

seconds, while pressing MD/CD. “EJECT OK” appears on the display, and the CD is “unlocked.”

EN 19-22 KD-MX3000R [E]/2 7/27/98, 5:30 PM22

ENGLISH

MD OPERATIONS

Playing an MD

1.Insert an MD into the loading

slot.

The unit turns on, draws the MD and starts

playback automatically.

2.Close the control panel by hand.

Open the control panel.

If there is already a CD or an MD inside the unit,

it ejects automatically.

Label side

Insert an MD in the same way as

indicated on the MD

Note on One-Touch Operation:

When an MD is already in the loading slot, pressing MD/CD turns on the unit and starts

playback automatically.

To stop play and eject the MD

Press 0.

MD play stops, the control panel opens, then the MD automatically ejects from the loading slot.

If you change the source to FM/AM, CD changer or external component, the MD play also

stops (without ejecting the MD this time).

Notes

• If the ejected disc is not removed for about 15 seconds , the disc is automatically inserted again into

the loading slot to protect it from dust. (MD play will not start this time.)

• You can eject the MD even when the unit is turned off.

• You cannot insert a CD and an MD inside the unit at the same time.

• When you insert an MD recorded in monaural, it will be played in monaural. While playing such a

monaural MD, the elapsed playing time may not be displayed correctly.

To change the display while playing an MD

Press DISP. Each time you press the button, the display changes to show the following:

Note:

If “SCROLL MODE” is set to either “AUTO” or “ONCE”, names including more than 12 characters

will be scrolled. (See page 37.)

Title of the track

Current track

Elapsed

playing time

Track number and Elapsed playing time

Disc title

Track title

EN 23 KD-MX3000R [E]/F 7/28/98, 5:11 PM23

To fast forward or reverse the track

Press and hold ¢

, while playing an MD, to fast forward the track.

Press and hold 4

, while playing an MD, to reverse the track.

To go to the next track or the previous track

Press ¢

briefly, while playing an MD, to go ahead to the beginning of

the next track. Each time you press the button consecutively, the beginning

of the next track is located and played back.

Press 4

briefly, while playing an MD, to go back to the beginning of

the current track. Each time you press the button consecutively, the beginning

of the previous track is located and played back.

To go to a particular track directly

Locating a track or a particular portion on an MD

SSM

Press the number button corresponding to the track number to start its

playback.

• To select a track number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a track number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1 second.

789101112

Number buttons

EN 23-26 KD-MX3000R [E]/2 7/27/98, 4:14 PM24

ENGLISH

Selecting MD playback modes

To play back tracks at random (Random Play)

You can play back all tracks on the MD at random.

Each time you press RND (Random) while playing an MD, MD random play

mode turns on and off alternately.

When the random mode is turned on, the RND indicator lights up on the

display and a track randomly selected starts playing.

To play back tracks repeatedly (Repeat Play)

You can play back the current track repeatedly.

Each time you press MO/RPT (Mono/Repeat) while playing an MD, MD

repeat play mode turns on and off alternately.

When the repeat mode is turned on, the RPT indicator lights up on the

display.

MO/RPT

RPT

Track number of the currently playing track

RND

EN 23-26 KD-MX3000R [E]/2 7/27/98, 4:14 PM25

Prohibiting MD ejection

You can prohibit the MD ejection and can “lock” an MD in the loading slot.

While holding MD/CD, press

for more than 2 seconds. “NO EJECT” flashes on the

display for about 5 seconds, and the MD is “locked” and cannot be ejected.

To cancel the prohibition and “unlock” the MD, press

again for more than 2

seconds, while holding MD/CD. “EJECT OK” appears on the display, and the MD is “unlocked.”

MD/CD

EN 23-26 KD-MX3000R [E]/2 7/27/98, 4:14 PM26

ENGLISH

SOUND ADJUSTMENTS

Selecting preset sound control modes

You can select a preset sound adjustment suitable to the music genre.

Call up the sound control mode you want.

Each time you press the button, the sound control mode

(SCM) changes as follows:

Indication For: Preset values

Bass Treble Loudness

OFF (Flat sound) 00 00 On

BEAT Rock or disco music +02 00 On

SOFT Quiet background music +01 –03 Off

POP Light music +04 +01 Off

Notes:

• You can adjust the preset sound control mode to your preference, and store it in memory.

If you want to adjust and store your original sound control mode, see “Storing your own sound

adjustments” on page 29.

• To adjust only the bass and treble reinforcement levels to your preference, see “Adjusting the sound”

on page 28.

SOUND

OFF BEAT SOFT

POP

SOUND

EN 27-29 KD-MX3000R [E]/2 7/27/98, 4:15 PM27

Adjusting the sound

You can adjust the sound characteristics to your preference.

Select the item you want to adjust.

Indication To do: Range

BASS Adjust the bass. –06 (min.) — +06 (max.)

TREBLE Adjust the treble. –06 (min.) — +06 (max.)

FADER* Adjust the front and rear speaker R06 (rear only) — F06 (front only)

balance.

BALANCE Adjust the left and right speaker L06 (left only) — R06 (right only)

balance.

LOUDNESS

Boost low and high frequencies to

produce a well-balanced sound at low

volume level.

VOLUME Adjust the volume. 00 (min.) — 50 (max.)

ON — OFF

Note:

* If you are using a two-speaker system, set the fader level to “00” (center).

Adjust the level.

Note:

Normally the control dial is used to set the volume. So you do not have

to select “VOLUME” to adjust the volume level.

SEL

BASS TREBLE FADER

BALANCE

VOLUME LOUDNESS

EN 27-29 KD-MX3000R [E]/2 7/27/98, 4:15 PM28

ENGLISH

Call up the sound control mode you want to

adjust.

See page 27 for details.

Select “BASS,” “TREBLE” or “LOUDNESS.”

Adjust the bass or treble level or turn the

loudness function ON/OFF.

See page 28 for details.

Press and hold SOUND until the sound control

mode you selected flashes on the display.

Your setting is stored in memory.

Repeat the same procedure to store other settings.

To reset to the factory settings

Repeat the same procedure and reassign the preset values listed in the table on page 27.

Storing your own sound adjustments

You can adjust the sound control modes (BEAT, SOFT, POP: see page 27) to your preference

and store your own adjustments in memory.

1,4

Within

5 seconds

SOUND

SEL

SOUND

EN 27-29 KD-MX3000R [E]/2 7/27/98, 4:15 PM29

OTHER MAIN FUNCTIONS

Setting the clock

Press and hold the button for more than

2 seconds so that “PSM” appears on the

lower part of the display.

Set the hour.

1 Select “CLOCK HOUR” if not

shown on the display.

2 Adjust the hour.

SEL

SSM

Set the minute.

1 Select “CLOCK MINUTE.”

2 Adjust the minute.

Start the clock.

To check the current clock time while the unit is turned off, press DISP.

The power turns on, the clock time is shown for 5 seconds, then the power turns off.

• If the ignition of your car is turned off or set to the accessory-off (ACC OFF) position, you

cannot use this function.

DISP

3,5

2,4

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:16 PM30

ENGLISH

You can change the items listed on the next page by using the PSM (Preferred Setting Mode)

control.

Basic Procedure

Changing the general settings (PSM)

Press and hold the button for more than 2

seconds so that “PSM” appears on the lower

part of the display.

Select the PSM item you want to adjust (see

page 32).

Select or adjust the PSM item selected above.

SSM

SEL

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:16 PM31

Factory-

preset

settings

See

page

SEL

SSM

PS NAME 16

29 programme types

(See page 18.)

VOL (00 – 50) VOL (20)

CLOCK HOUR Hour adjustment

CLOCK MINUTE Minute adjustment

CLOCK24H/12H 24/12-hour time

display

AUTO ADJUST Automatic setting of

the clock

DISPLAY MODE Display mode

PTY STANDBY PTY standby

PTY SEARCH PTY search

TA VOLUME Traffic announcement

volume

LEVEL METER Level display

DIMMER MODE Dimmer

CRUISE MODE Audio cruise

+OR- RPM SET Idling speed*

BOOST Boost*

TELEPHONE Audio mute for cellular

phone system

BEEP SWITCH Key-touch tone

P.AMP SWITCH Power amplifier switch

CONTRAST Display contrast

SCROLL MODE Name display

Set.

Back Advance

Back

Advance

12HOUR

24HOUR

OFF ON

PS NAME

FREQUENCY

NORMAL PEAK

OFF

0:00

24HOUR

NEWS

NORMAL 33

AUTO

OFF

AUTO

OFF

MUTING 1

OFF

MUTING 2

ON ONOFF

OFF

1 –10

ONCE

AUTO

OFF

ONCE

Select.

01 – 15

—

800 rpm

(See page 13.)

* When you select “1” or “2” for Audio Cruise Mode, you can adjust these items.

• Press SEL (Select) when the setting is complete.

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:16 PM32

ENGLISH

Selecting 24-hour or 12-hour clock

You can change the clock built in this unit either to 24 hour system or 12 hour system.

1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “CLOCK24H/12H” with ¢

or 4 .

3. Select “CLOCK 24HOUR” or “CLOCK 12HOUR” with the control dial.

The clock alternates between 24-hour system and 12-hour system.

Selecting the level display

You can select the level display according to your preference. When shipped from the factory,

the level indicator on the display shows the audio level setting.

• NORMAL: Audio level indicator

• PEAK: Peak level indicator

• OFF: Volume level indicator

1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “LEVEL METER” with ¢

or 4 .

3. Select the desired mode with the control dial.

The level display setting changes as follows:

Selecting the dimmer mode

When you turn on the car head lights, the display automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer mode is activated.

• AUTO: Activates Auto Dimmer

• ON: Always dims the display

• OFF: Cancels Auto Dimmer

1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “DIMMER MODE” with ¢

or 4 .

3. Select the desired mode with the control dial.

The dimmer mode changes as follows:

Note on Auto Dimmer:

Auto dimmer provided for this unit may not work correctly on some vehicles, particularly on those

having a control dial for dimming.

In this case, set the dimmer mode to “ON” or “OFF.”

24HOUR 12HOUR

NORMAL PEAK

OFF

AUTO ON

OFF

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:16 PM33

Controlling the volume automatically (Audio Cruise

Mode)

You can select the proper cruise mode for your car.

This unit changes the volume level automatically (at 3 possible levels) based on the driving

speed of your car by detecting the alternator’s generating frequency (Audio Cruise).

If you want to use this mode, follow the procedures below. When shipped from the factory,

this mode is set to “OFF.”

• 1: Select this if your car is relatively quiet.

• 2: Select this if your car is relatively loud.

The volume increase rate is twice as much as that of the CRUISE 1 setting.

• OFF: Cancels Audio Cruise.

1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “CRUISE MODE” with ¢

or 4 .

3. Select the desired mode with the control dial.

The cruise mode changes as follows:

When this function is turned on (the CRUISE indicator lights up on the display), the proper

volume level is automatically selected among the 3 possible levels according to the driving

speed, and the selected level is shown on the display.

To adjust the volume increase rate

If you find Audio Cruise increase (or decrease) the volume either too much or too little as the

driving speed changes, you can adjust the increase rate by changing the boost level.

To change it, follow the procedure below.

1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “CRUISE MODE” with ¢

or 4 .

3. Select either “CRUISE 1” or “CRUISE 2” with the control dial.

4. Select “BOOST” with ¢

or 4 .

The current boost level appears on the display.

5. Select the desired boost level (among 1 to 15) with the control dial while the current boost

level is shown on the display.

• To increase the volume increase rate, rotate it clockwise.

• To decrease the volume increase rate, rotate it counterclockwise.

OFF

When the driving speed decreases.

When the driving speed increases.

CRUISE CRUISECRUISE

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:16 PM34

ENGLISH

If Audio Cruise does not function correctly

You may need to store the idling speed into memory to make Audio Cruise function correctly.

NOTICE that a number of factors, such as electric power steering, wipers, power windows,

air conditioner, etc. do generate noises and, as a result, may cause Audio Cruise not to

function correctly.

1. Start the engine and let it warm up.

2. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

3. Select “CRUISE MODE” with ¢

or 4 .

4. Select either “CRUISE 1” or “CRUISE 2” with the control dial.

5. Select “+OR- PRM SET” with ¢

or 4 .

6. Select the desired idling speed with the control dial.

When the setting is complete, the unit automatically checks to see if Audio Cruise functions

correctly with this new idling setting. If it does not function correctly, Audio Cruise is canceled

automatically and the idling setting becomes invalid.

• If this happens, see the NOTICE above.

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:17 PM35

Selecting the telephone muting

This mode is used when a cellular phone system is connected. Depending on the phone

system used, select either “MUTING 1” or “MUTING 2”, whichever mutes the sounds from

this unit.

When shipped from the factory, this mode is deactivated.

• MUTING 1: Select this if this setting can mute the sounds.

• MUTING 2: Select this if this setting can mute the sounds.

• OFF: Cancels the telephone muting.

1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “TELEPHONE” with ¢

or 4 .

3. Select the desired mode with the control dial.

The telephone muting mode changes as follows:

Turning on or off the key-touch tone

You can deactivate the key-touch tone if you do not want to make it beep when you press a

button. When shipped from the factory, the key-touch tone is activated.

• ON: Activates the key-touch tone

• OFF: Deactivates the key-touch tone

1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “BEEP SWITCH” with ¢

or 4 .

3. Select the desired mode with the control dial.

The key-touch tone alternates between on and off.

Turning on or off the power amplifier switch

You can switch off the built-in amplifier and send the audio signals only to the external

amplifier(s) to get clear sounds and to prevent internal heat buildup. When shipped from the

factory, the power amplifier switch is turned on so that built-in amplifier works.

• ON: Select this when not using external power amplifier(s).

• OFF: Select this when using external power amplifier(s).

1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “P.AMP SWITCH” with ¢

or 4 .

3. Select the desired mode with the control dial.

The power amplifier switch alternates between on and off.

MUTING 1 MUTING 2

OFF

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:17 PM36

ENGLISH

Adjusting the contrast level

You can adjust the display contrast level (among 1 to 10). When shipped from the factory, the

display contrast level is at level 5.

1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “CONTRAST” with ¢

or 4 .

3. Select the desired level with the control dial.

Selecting the scroll mode

You can select the scroll mode for the name display and disc information if they consist of

more than 12 characters. When shipped from the factory, Auto Scroll mode is set to “ONCE”.

• AUTO: Repeats the scroll (5-second intervals in between).

• ONCE: Scrolls only once.

• OFF: Cancels Auto Scroll.

1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower

part of the display.

2. Select “SCROLL MODE” with ¢

or 4 .

3. Select the desired mode with the control dial.

The scroll mode changes as follows:

Note:

Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP for more than 1

second.

AUTO ONCE

OFF

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:17 PM37

Assigning names to the sources

You can assign names to CDs and the external component connected to the LINE IN plugs.

After assigning a name, it will appear on the display when you select the source.

Sources Maximum number of the characters

CDs up to 32 characters (up to 46 discs)

External component up to 12 characters

Select a source you want to assign a name to.

Press and hold SEL (select) for more than 2

seconds while pressing DISP.

Note:

You cannot assign a name to an MD.

When you select the CD as

the source:

When you select the external

component connected to LINE IN

as the source:

DISP

SEL

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:17 PM38

ENGLISH

Select the character set you want while “ ”

is flashing.

Each time you press the button, the character set changes

as follows:

Select a character.

About the available characters, see page 40.

Move the cursor to the next (or previous)

character position.

Repeat steps 3 to 5 until you finish inputting

the name.

Press the button while the last selected

character is flashing.

The input name is stored in memory.

To erase the input characters

Insert spaces using the same procedure described above.

Note:

When you assign a name to the 47th disc, “NAME FULL” appears on the display. (In this case, delete

unwanted names before assignment.)

Capital letters

Small letters

Numbers and symbols

DISP

SSM

SEL

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:17 PM39

Available characters

Capital letters

A B C D E F G H I J

K L M N O P Q R S T

U V W X Y Z

Space

a b c d e f g h i j

k l m n o p q r s t

u v w x y z

0 1 2 3 4 5 6 7 8 9

! ” # $ % & ’ ( )

+ , – . / : ; < =

? @ _ `

Small letters

Numbers and symbols

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:17 PM40

ENGLISH

How to detach the control

panel

Before detaching the control panel, be sure

to turn off the power.

Unlock the control panel.

Pull the control panel out of

the unit.

Put the detached control

panel into the provided case.

How to attach the control

panel

Insert the left side of the

control panel into the groove

on the panel holder.

Press the right side of the

control panel to fix it to the

panel holder.

Note on cleaning the connectors:

If you frequently detach the control panel, the

connectors will deteriorate.

To minimize this possibility, periodically wipe

the connectors with a cotton swab or cloth

moistened with alcohol, being careful not to

damage the connectors.

Detaching the control panel

You can detach the control panel when leaving the car.

When detaching or attaching the control panel, be careful not to damage the connectors on

the back of the control panel and on the panel holder.

Connectors

EN 30-41 KD-MX3000R [E]/2 7/27/98, 4:17 PM41

REMOTE OPERATIONS

Before using the remote controller:

• Aim the remote controller directly at the remote sensor

on the main unit. Make sure there is no obstacle in

between.

• Do not expose the remote sensor to strong light (direct

sunlight or artificial lighting).

Remote sensor

1. Remove the battery case.

1) Push in the direction indicated by the arrow with

your right hand thumbnail.

2) Remove the battery case.

2. Replace the battery.

Put the battery in the case with the + side facing

upwards.

3. Return the battery case.

Insert again the battery case pushing until you hear a

clicking sound.

Installing the batteries

When it becomes necessary to bring the remote controller close to the remote sensor for it to

work, the battery is running low. At this point, the battery should be replaced. (Battery life is

about 1 year with normal use.)

WARNING:

• Store the batteries in a place which children cannot reach.

If a child accidentally swallows the battery, immediately consult a doctor.

• Do not recharge, short, disassemble or heat the batteries or dispose of in a fire.

Doing any of these things may cause the batteries to give off heat, crack or start a fire.

• Do not leave the batteries with other metallic materials.

Doing this may cause the batteries to give off heat, crack or start a fire.

• When throwing away or saving the batteries, wrap in tape and insulate; otherwise, , it may cause

the batteries to give off heat, crack or start a fire.

• Do not poke the batteries with tweezers or similar tools.

Doing this may cause the batteries to give off heat, crack or start a fire.

(back side)

Lithium coin battery

(product number:

CR2025)

(back side)

EN 42-43 KD-MX3000R [E]/2 7/27/98, 4:18 PM42

ENGLISH

Using the remote controller

1 Functions the same as the button on the main unit.

2 • Functions as the BAND button while listening to the radio.

Each time you press the button, the band changes.

• Functions as the DISC + button while listening to the CD

changer.

Each time you press the button, the disc number increases,

and the selected disc starts playing.

• Does not function as the PROG button.

3 • Functions as the PRESET button while listening to the radio.

Each time you press the button, the preset station number

increases, and the selected station is tuned in.

• Functions as the DISC – button while listening to the CD

changer.

Each time you press the button, the disc number decreases,

and the selected disc starts playing.

4 Functions the same as the control dial on the main unit.

• Does not function for the preferred setting mode adjustment.

5 Select the source.

Each time you press FUNC (function), the source changes.

6 • Searches stations while listening to the radio.

• Fast forwards or reverses the track if pressed and held

while listening to a CD or an MD.

• Skips to the beginning of the next tracks or goes back to

the beginning of the current (or previous) tracks if pressed

briefly while listening to a CD or an MD.

RM-RK25

EN 42-43 KD-MX3000R [E]/2 7/27/98, 4:18 PM43

Select the CD automatic changer.

Each time you press the button, you can select the CD

automatic changer and the external component alternately.

Playback starts from the first track of the first disc.

All tracks of all discs are played back.

CD CHANGER OPERATIONS

Number buttons

We recommend that you use one of the CH-X series (ex: CH-X1200) with your unit.

If you have another type of CD automatic changer, consult your JVC IN-CAR ENTERTAINMENT

dealer for connections.

• For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K)

for connecting it to this unit.

Before operating your CD automatic changer:

• Refer also to the Instructions supplied with your CD changer.

• If no discs are in the magazine of the CD changer or the discs are inserted upside

down, “NO DISC” will appear on the display. If this happens, remove the magazine and

set the discs correctly.

• If “RESET 1 - RESET 8” appears on the display, something is wrong with the connection

between this unit and the CD changer. If this happens, check the connection, connect

the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.

Playing CDs

Note on One-Touch Operation:

When you press EXT/CH, the power automatically comes on. You do not have to press

to turn on the power.

EXT/CH

Track number*

Disc number

Elapsed playing time*

* When you play a CD Text, the disc title and

performer appear. Then the current track

number and elapsed playing time appear on the

display.

EN 44-47 KD-MX3000R [E]/2 7/27/98, 4:19 PM44

ENGLISH

To fast forward or reverse the track

Press and hold ¢

, while playing a CD, to fast forward the track.

Press and hold 4

, while playing a CD, to reverse the track.

To go to the next track or the previous track

Press ¢

briefly, while playing a CD, to go ahead to the beginning of the

next track. Each time you press the button consecutively, the beginning of

the next track is located and played back.

Press 4

briefly, while playing a CD, to go back to the beginning of the

current track. Each time you press the button consecutively, the beginning

of the previous track is located and played back.

To go to a particular disc directly

Press the number button corresponding to the disc number to start its

playback (while the CD changer is playing).

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1 second.

SSM

Ex. When disc number 3 is selected

789101112

Disc number

Track number

EN 44-47 KD-MX3000R [E]/2 7/27/98, 4:19 PM45

Selecting CD playback modes

MO/RPT

RND

To play back tracks at random (Random Play)

Each time you press RND (Random) while playing a CD, CD random play

mode changes as follows:

Mode RND Indicator Plays at random

RANDOM1 Lights All tracks of the current disc, then the tracks of the

next disc, and so on.

RANDOM2 Flashes All tracks of all discs inserted in the magazine.

To play back tracks repeatedly (Repeat Play)

Each time you press MO/RPT(Mono/Repeat) while playing a CD, CD repeat

play mode changes as follows:

Mode RPT Indicator Plays repeatedly

REPEAT1 Lights The current track (or specified track).

REPEAT2 Flashes All tracks of the current disc (or specified disc).

RND

RPT

REPEAT1 REPEAT2

Canceled

RANDOM1 RANDOM2

Canceled

EN 44-47 KD-MX3000R [E]/2 7/27/98, 4:19 PM46

ENGLISH

Playing the CD Text

The following operations are possible only when a CD changer compatible with CD

Text is connected (ex.: CH-X1200).

In a CD Text, some information about the disc (its disc title, performer, and track title) is

recorded. You can show these disc information on the display.

Select the text display mode while playing a

CD.

Each time you press the button, the display changes as

follows:

Notes:

• The display shows up to 12 characters at one time and scrolls if there are more than 12 characters.

See also “Selecting the scroll mode” on page 37.

• When you press DISP while playing a CD you have assigned a name to, you can also show it on the

display. If you have not assigned a name, “NO NAME” appears on the display.

DISP

Disc Title/Performer

Track Title

Current Track and Elapsed Playing Time

EN 44-47 KD-MX3000R [E]/2 7/27/98, 4:19 PM47

EXTERNAL COMPONENT OPERATIONS

Select the external component.

Each time you press the button, you can select the CD

automatic changer and the external component alternately.

Turn on the connected device and start playing the source.

Adjust the volume.

Notes:

• For the external component connection, see the Installation/Connection Manual (separate volume).

• See also “Assigning names to the sources” on page 38 if you want to match the name shown on the

display with the name of the connected component.

Note on One-Touch Operation:

When you press EXT/CH, the power automatically comes on. You do not have to press

to turn on the power.

To turn up the

volume

To turn down

the volume

EXT/CH

EN 48-48 KD-MX3000R [E]/2 7/27/98, 4:19 PM48

ENGLISH

MAINTENANCE

Handling Discs

Taking care of CDs

This unit has been designed only to reproduce the CDs bearing the or mark.

Other discs cannot be played back.

How to handle CDs

When removing a CD from its case, press down the center holder of

the case and lift the CD out, holding it by the edges.

• Always hold the CD by the edges. Do not touch its recording surface.

When storing a CD into its case, gently insert the CD onto the

center holder (with the printed surface facing up).

• Make sure to store CDs into the cases after use.

To keep CDs clean

A dirty CD may not play correctly. If a CD does become dirty, wipe it with

a soft cloth in a straight line from center to edge.

To play new CDs

New CDs may have some rough spots around the inner and outer edges.

If such a CD is used, this unit may reject the CD.

To remove these rough spots, rub the edges with a pencil or ball-point

pen, etc.

CAUTIONS:

• Do not insert any CD of unusual shape – like a heart or flower; otherwise, it will cause a

malfunction.

• Do not expose CDs to direct sunlight or any heat source or place them in a place subject to high

temperature and humidity. Do not leave them in a car.

• Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.)

to clean CDs.

COMPACT

DIGITAL AUDIO

Center holder

About mistracking:

Mistracking may result from driving on extremely rough roads. This does not damage the

unit and the CD, but will be annoying.

We recommend that you stop CD play while driving on such rough roads.

EN 49-53 KD-MX3000R [E]/2 7/27/98, 4:20 PM49

Taking care of MDs

Since the disc is accommodated inside a cartridge, it can be handled easily without caring

about dust and dirt. However, to maintain the high audio quality for an extended period, use

care in the following points.

Disc storage

Do not place the MD in following places.

• In a place subject to direct sunlight or where the temperature rises, for example in a closed

automobile. The disc may be warped or damaged in these places.

• In a bathroom or where the humidity is high. The MD may be rusted in these places.

• On a beach where grit may penetrate through an opening on the cartridge.

Periodical maintenance

When the cartridge gets dusty or dirty, wipe it with a soft dry cloth.

Do not open the shutter

The shutter is usually locked to prevent opening.

Do not force it open or the disc may be

damaged.

Moisture condensation

Moisture may condense on the lens inside the unit in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the unit may malfunction. In this case, eject the disc and leave the unit

turned on for a few hours until the moisture evaporates.

EN 49-53 KD-MX3000R [E]/2 7/27/98, 4:20 PM50

ENGLISH

Causes

CD is inserted upside down.

You are driving on rough roads.

The disc is scratched.

Connections are incorrect.

The volume control is turned to

the minimum level.

Connections are incorrect.

“P. AMP (Power Amplifier)

SWITCH” is not set correctly.

Signals are too weak.

The antenna is not connected

firmly.

No CD is in the loading slot (or

in the magazine).

The CD is inserted incorrectly.

This unit is not connected to a

CD changer correctly.

The unit may function

incorrectly.

What appears to be trouble is not always serious. Check the following points before calling a

service center.

TROUBLESHOOTING

Remedies

Insert the CD correctly.

Stop playing CD or MD while

driving on rough roads.

Change the disc.

Check the cords and

connections.

Adjust it to the optimum level.

Check the cords and

connections.

Set “P. AMP SWITCH” correctly.

See page 36.

Store stations manually.

Connect the antenna firmly.

Insert a CD.

Insert it correctly.

Connect this unit and the CD

changer correctly and press the

reset button of the CD changer.

Press the reset button of the CD

changer.

Press MD/CD and SEL at the

same time for more than 2

seconds. (“PLEASE EJECT”

appears on the display.) When

you open the control panel by

pressing 0, be careful not to drop

the disc when it is ejected.

Symptoms

• CD cannot be played back.

• CD or MD sound is

sometimes interrupted.

• Sound cannot be heard from

the speakers.

• SSM (Strong-station

Sequential Memory)

automatic preset does not

work.

• Static noise while listening to

the radio.

• “NO DISC” appears on the

display.

• “RESET 8” appears on the

display.

• “RESET 1-RESET 7” appears

on the display.

• CD or MD can be neither

played back nor ejected.

CONTINUED TO THE NEXT PAGE

EN 49-53 KD-MX3000R [E]/2 7/27/98, 4:20 PM51

Causes

An error occurs while playing a

CD or an MD.

You have inserted a blank disc.

You have pressed MD/CD when

there was no CD or MD inside

the unit.

You have pressed DISP with a

disc for which no name was

assigned.

The temperature inside the unit

becomes very high.

The connectors are dirty.

Preset adjustments have been

lost or damaged due to noise

interference, etc.

The built-in microcomputer may

function incorrectly due to noise,

etc.

Remedies

Press 0, then reinsert the disc.

Insert a recorded MD.

Insert a CD or an MD.

Assign a name to the disc.

Switch the source to the tuner

and wait until the temperature

decreases.

Clean the connectors

periodically (once a month).

Contact the shop where you

have purchased the unit or a

service center.

• Press the reset button on the

front panel. (See page 4.)

• Press and SEL at the

same time for more than 2

seconds to reset the unit. (The

clock setting and preset stations

stored in memory are erased.)

Symptoms

• “DISC ERROR” appears on

the display.

• “BLANK DISC” appears on

the display.

• “NO DISC” appears on the

display.

• “NO NAME” appears on the

display.

• “HIGH TEMP” appears on the

display.

• Nothing appears on the

display.

• “NO PRE ADJ.” appears on

the display.

• The unit does not work at all.

EN 49-53 KD-MX3000R [E]/2 7/27/98, 4:20 PM52

ENGLISH

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front: 40 watts per channel

Rear: 40 watts per channel

Continuous Power Output (RMS):

Front: 16 watts per channel into 4 Ω, 40

to 20,000 Hz at no more than 0.8%

total harmonic distortion.

Rear: 16 watts per channel into 4 Ω, 40

to 20,000 Hz at no more than 0.8%

total harmonic distortion.

Load Impedance: 4 Ω (4 to 8 Ω allowance)

Tone Control Range

Bass: ±10 dB at 100 Hz

Treble:±10 dB at 10 kHz

Frequency Response: 40 to 20,000 Hz

Signal-to-Noise Ratio: 70 dB

Line-In Level/Impedance: 1.5 V/20 kΩ

Line-Out Level/Impedance: 2.0 V/20 kΩ load

(full scale)

Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range

FM: 87.5 to 108.0 MHz

AM: (MW) 522 to 1,620 kHz

(LW) 144 to 279 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 to 15,000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 to 20,000 Hz

Dynamic Range: 96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

MD PLAYER SECTION

Audio Playing System: MiniDisc digital audio

system

Reading System: Non-contact,

semiconductor laser pickup (λ=780 nm)

Error Correction System: CIRC (Cross

Interleave Reed-Solomon Code)

Sampling Frequency: 44.1 kHz

Audio Compression System: ATRAC

(Adaptive TRansform Acoustic Coding)

Number of Channels: 2

Frequency Response: 5 to 20,000 Hz

Dynamic Range: 92 dB

Signal-to-Noise Ratio: 95 dB

Wow And Flutter: Immeasurable

GENERAL

Power Requirement

Operating Voltage: DC 14.4 volts (11 to 16

volts allowance)

Grounding System: Negative ground

Dimensions (W x H x D)

Installation Size:

182 x 52 x 165 mm

Panel Size: 188 x 58 x 14 mm

Mass: 1.8 kg (excluding accessories)

Design and specifications subject to change

without notice.

US and foreign patents licensed from Dolby

Laboratories Licensing Corporation.

SPECIFICATIONS

EN 53 KD-MX3000R [E]/F 7/28/98, 5:12 PM53

MD/CD RE

MD/CD RECE

RECEPTEUR

MD/CD RECE

VICTOR COMPANY OF JAPAN, LIMITED

Printed in Japan

0798MNMMDWOZK

EN, GE, FR, NL

For installation and

Angaben zu Einba

Pour l’installtion

Zie de afzonderlijk

Detachable

KD-MX

KD-MX3000R[312]COVER 7/28/98, 5:58 PM2

JVC KDMX3000R Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info