655781
5
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
EN
LPT0326-001A
ENGLISH
CONTENTS
Filename [Cov1.fm]
VIDEO CASSETTE RECORDER
SAFETY FIRST 2
Safety Precautions ......................................... 2
INDEX 4
INSTALLING YOUR NEW RECORDER 8
Basic Connections ........................................ 8
S-VIDEO Connection .................................... 9
INITIAL SETTINGS 10
Auto Set Up ................................................ 10
Preset Download ........................................ 12
Language .................................................... 14
SAT CONTROL SET 15
Satellite Receiver Control Setting ................ 15
T-V LINK 17
T-V Link Functions ...................................... 17
PLAYBACK 18
Basic Playback ............................................ 18
Playback Features ....................................... 19
RECORDING 23
Basic Recording .......................................... 23
Recording Features ..................................... 24
B.E.S.T. Picture System ............................... 27
TIMER RECORDING 28
S
HOW
V
IEW
®
Timer Programming ................ 28
Express Timer Programming ........................ 30
Automatic Satellite Programme
Recording ................................................... 34
EDITING 35
Edit From A Camcorder ..............................35
Output/Input Set ......................................... 36
Edit To Or From Another Video
Recorder ..................................................... 38
Audio Dubbing ........................................... 40
Insert Editing ............................................... 42
SYSTEM CONNECTIONS 44
Connecting To A Satellite Receiver ............. 44
Connecting/Using A Decoder ..................... 46
Connecting/Using A Stereo System ............. 47
SUBSIDIARY SETTINGS 48
Mode Set .................................................... 48
Tuner Set ....................................................52
Video Channel Set ...................................... 58
S
HOW
V
IEW
®
Setup ......................................59
Clock Set ....................................................60
TROUBLESHOOTING 62
QUESTIONS AND ANSWERS 65
SPECIFICATIONS 66
LIST OF TERMS 67
Cov1.fm Page 1 Thursday, March 9, 2000 3:40 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Left-FullColx2
2
EN
Filename [HRS7700EU1.fm]
Page 2 March 8, 2000 1:13 pm
SAFETY FIRST
Safety Precautions
The rating plate and the safety caution are on the rear of the unit.
WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
CAUTION
8
When you are not using the recorder for a long period of time, it is recommended that you disconnect
the power cord from the mains outlet.
8
Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric
shock or fire hazard, remove the power cord from the mains outlet prior to connecting or
disconnecting any signal lead or aerial.
WARNING
There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-
West), and SECAM-B, used in Eastern European countries (also called SECAM-East).
1. This recorder can also receive SECAM-B colour television signals for recording and playback.
2. Recordings made of SECAM-B television signals produce monochrome pictures if played back on a
video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a
PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).
3. SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce
monochrome pictures when played back with this recorder.
4. This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L
signals.
IMPORTANT
8
Please read the various precautions on page 2 and 3 before installing or operating the recorder.
8
It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without
the consent of the owner of copyright in the sound or video recording, broadcast or cable programme
and in any literary, dramatic, musical, or artistic work embodied therein.
Cassettes marked “S-VHS” and “VHS” can be used with this video cassette recorder. However, S-VHS recordings are possible only
with cassettes marked “S-VHS”.
By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.
S
HOW
V
IEW
is a registered trademark of Gemstar Development Corporation. The S
HOW
V
IEW
system is manufactured under licence
from Gemstar Development Corporation.
HRS7700EU1.fm Page 2 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-Full-NoTitle0
EN
3
Filename [HRS7700EU1.fm]
Page 3 March 8, 2000 1:13 pm
Failure to heed the following precautions may result in damage to the recorder, remote control or video
cassette.
1. DO NOT place the recorder . . .
...in an environment prone to extreme temperatures or humidity.
...in direct sunlight.
...in a dusty environment.
...in an environment where strong magnetic fields are generated.
...on a surface that is unstable or subject to vibration.
2. DO NOT block the recorder’s ventilation openings.
3. DO NOT place heavy objects on the recorder or remote control.
4. DO NOT place anything which might spill on top of the recorder or remote control.
5. AVOID violent shocks to the recorder during transport.
MOISTURE CONDENSATION
Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or
under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold
liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where
condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.
For Italy:
“It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.’95
published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.’95
The STANDBY/ON
1
button does not completely shut off mains power from the unit, but switches
operating current on and off. “
`
“ shows electrical power standby and “
!
“ shows ON.
Video tapes recorded with this video recorder in the LP (Long Play) mode cannot be played back on a
single-speed video recorder.
HRS7700EU1.fm Page 3 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Left-index
4
EN
Filename [HRS7700EU1.fm]
Page 4 March 8, 2000 1:13 pm
INDEX
FRONT VIEW
* Attach the provided connector cover when you do not use the front panel connectors.
A
STANDBY/ON
1
Button
pg. 10
B
DIGITAL TBC/NR Button
pg. 21
C
SP/LP Button
pg. 23
D
Cassette Loading Slot
E
Play
4
Button
pg. 18
F
JOG Dial
pg. 19
G
SHUTTLE Ring
pg. 18
H
S-VIDEO Input Connector
pg. 35, 42
I
VIDEO/AUDIO Input Connectors
pg. 35, 40,
42
J
PR +/– Buttons
pg. 23
K
S-VHS ET Button
pg. 25
L
SAT
#
Button
pg. 34
M
Front Display Panel
pg. 5
N
Infrared Beam Receiving Window
O
Record
7
Button
pg. 23
P
Pause
9
Button
pg. 19
Q
INSERT Button
pg. 42
R
Audio Dubbing (A.DUB) Button
pg. 40
S
Stop/Eject
0
Button
pg. 18, 23
REAR VIEW
A
Mains Power Cord
pg. 8
B
S OUT Connector
pg. 9
C
AV1 (L-1) IN/OUT Connector
pg. 8, 38, 44,
45, 46
D
ANT. IN Connector
pg. 8
E
Remote PAUSE Connector
pg. 35
F
AUDIO OUT (L/R) Connectors
pg. 47
G
AV2 (L-2) IN/DECODER Connector
pg. 15,
38, 44, 45, 46
H
SAT CTL Connector
pg. 15
I
RF OUT Connector
pg. 8
HRS7700EU1.fm Page 4 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-index
EN
5
Filename [HRS7700EU1.fm]
Page 5 March 8, 2000 1:13 pm
FRONT DISPLAY PANEL
A
B.E.S.T. Picture System Display
pg. 27
Audio Level Indicator
B
Programme Time Indicators
pg. 30
C
Symbolic Mode Indicators
D
“Timer” Indicator
pg. 29, 31
E
S-VHS Indicator
pg. 25, 51
F
Channel/Clock Display
pg. 13
G
Tape Speed Indicators
pg. 23
* EP is for NTSC playback only.
H
Instant REVIEW Indicator
pg. 20
I
Audio Mode Indicator
pg. 22
J
Tape Remaining Time Indicator
pg. 25
K
“Cassette Loaded” Mark
L
VPS/PDC Indicator
pg. 29, 31
M
VCR Indicator
pg. 24
N
Counter/Remain Display
O
Mode Display (L-1, L-2, F-1, S-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
pg. 37), “SAT” appears
instead of “L-2”.
PLAY:
FF/REW VARIABLE
SEARCH:
STILL:
SLOW:
RECORD:
RECORD
PAUSE:
AUDIO DUBBING:
AUDIO DUBBING PAUSE:
INSERT:
INSERT PAUSE:
AV INSERT:
AV INSERT PAUSE:
HRS7700EU1.fm Page 5 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
6
EN
Page 6 March 8, 2000 6:15 pm
INDEX (cont.)
ON-SCREEN DISPLAY
When “O.S.D.” is set to “ON” (
pg. 49), various operational indicators appear on the TV screen.
A
Operation Mode Indicators
B
Tape Speed SP/LP/EP
* EP is for NTSC playback only.
C
Tape Direction
D
Counter Display
E
Tape Remaining Time Indicator
pg. 25
F
Audio Mode Display
pg. 22
G
Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press
3 or
5 from the Stop mode
or perform an Index Search
(
pg. 21). The position of
q” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
H
Type of Broadcast
pg. 26
I
Current Day/Month/Year
J
Clock Display
K
Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1, S-1 or
SAT*)
* When “L-2 SELECT” is set to “SAT” (
pg. 37), “SAT” appears
instead of “L-2”.
L
Timer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
& on the remote control.
M
“Cassette Loaded” Mark
Beginning End
HRS7700EU1.fm Page 6 Wednesday, March 8, 2000 6:15 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
7
Filename [HRS7700EU1.fm]
Page 7 March 8, 2000 1:13 pm
REMOTE CONTROL
A
TV Button
“Operating JVC TVs” in the right
column
B
TV/VCR Button
pg. 24 and “Operating JVC
TVs” in the right column
C
REVIEW Button
pg. 20
D
NUMBER Keys
pg. 23, 28
E
VPS/PDC Button
pg. 29, 31
F
Cancel
&
Button
pg. 32
0000 Button
pg. 25
G
STOP +/– Button
pg. 30
H
START +/– Button
pg. 30
I
PROG Button
pg. 28
J
Programme Check
"
Button
pg. 32
K
Rewind
3
Button
pg. 18, 20
L
Record
7
Button
pg. 23
M
Stop
8
Button
pg. 18, 23
N
MENU Button
pg. 14
O
r
t
Button
pg. 10
TV PR +/– Button
“Operating JVC TVs” below
P
STANDBY/ON
1
Button
pg. 10
Q
AUDIO Button
pg. 22
^
(TV Muting) Button
“Operating JVC TVs”
below
R
Display – – : – – Button
pg. 25
S
DAILY Button
pg. 29, 31
T
WEEKLY Button
pg. 29, 31
U
AUX Button
pg. 35
V
Timer
#
Button
pg. 29, 31
W
DATE +/– Button
pg. 30
X
PR +/– Button
pg. 23
Y
Auto Tracking
p
Button
pg. 21
SP/LP Button
pg. 23
Z
30 SEC Button
pg. 20
a
Play
4
Button
pg. 18
b
Fast Forward
5
Button
pg. 18, 20
c
Pause
9
Button
pg. 19
d
OK Button
pg. 11
e
w
e
Button
pg. 19, 21
TV
%
+/– Button
“Operating JVC TVs” below
Buttons with a small dot on the left side of the name can also
be used to operate your JVC TV while holding down the
TV
button. (
“Operating JVC TVs” in the right column)
This remote control transmits A code signals only; it is not
applicable to B code signals.
How To Use
The remote control can operate most of your video recorder’s
functions, as well as basic functions of JVC TV sets.
(
“Operating JVC TVs” below)
Point the remote control toward the receiving window.
The maximum operating distance of the remote control is
about 8 m.
Operating JVC TVs
To operate your TV, while holding down the
TV
button, press
the corresponding button:
1,
TV/VCR
,
TV PR
+/–,
TV
%
+/–
, ^ (TV Muting).
NOTES:
When inserting the batteries, be sure to insert in the correct
directions as indicated under the battery cover.
Depending on the type of JVC TV, some or all functions
may not be operated using the remote control.
If the remote control doesn’t work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.
HRS7700EU1.fm Page 7 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
8
EN
Page 8 March 9, 2000 3:43 pm
INSTALLING YOUR NEW RECORDER
Basic Connections
It’s essential that your video recorder be properly
connected.
A
Check the contents.
Make sure the package contains all of the accessories
listed in “SPECIFICATIONS” on page 66.
B
Situate the recorder.
Place the recorder on a stable, horizontal surface.
C
Connect the recorder to TV.
The connection method you use depends on the type of
TV you have.
RF Connection
8
To connect to a TV with NO AV input connectors . . .
A
Disconnect the TV aerial cable from the TV.
B
Connect the TV aerial cable to the ANT. IN connector
on the rear panel of the recorder.
C
Connect the provided RF cable between the RF OUT
connector on the rear panel of the recorder and the
TV’s aerial connector.
AV Connection
8
To connect to a TV with AV input connectors . . .
A
Connect the aerial, recorder and TV as per “RF
Connection”.
B
Connect an optional 21-pin SCART cable between the
AV1 (L-1) IN/OUT connector on the rear panel of the
recorder and the TV’s 21-pin SCART connector.
D
Connect the recorder to mains.
Plug the end of the mains power cord into a mains outlet.
Make AV connection if your TV has a 21-pin AV input
connector (SCART) in order to reduce the possibility of
interference. With AV connection, you can enjoy
stereo playback of video tapes if you are using a stereo
TV.
NOTES:
The AV1 (L-1) IN/OUT connector accepts and delivers
either a composite signal (regular video signal) or a Y/C
signal (a signal in which the luminance and chrominance
signals are separated). If your TV’s 21-pin AV input
connector (SCART) is compatible with the Y/C signal, set
“L-1 OUTPUT” to “S-VIDEO” after the connection and the
initial settings are completed (
pg. 36). You can obtain
high-quality S-VHS pictures. (For connection, be sure to
use a 21-pin SCART cable that is compatible with the Y/C
signal.)
Set your TV to the VIDEO (or AV), Y/C, or RGB mode
according to the type of your TV’s SCART connector.
For switching the TV’s mode, refer to the instruction
manual of your television.
To obtain high-quality S-VHS pictures, you can also use the
S-VIDEO connection described on page 9.
Aerial connector
Back of TV
21-pin SCART
connector
TV aerial cable
RF cable
(provided)
21-pin SCART
cable
(not provided)
Mains power cord
Mains outlet
Back of recorder
AV1 (L-1) IN/OUT
ANT. IN
RF OUT
THESE STEPS MUST BE COMPLETED BEFORE ANY
VIDEO OPERATION CAN BE PERFORMED.
After the connection is completed, perform “Auto Set
Up” on page 10.
HRS7700EU1.fm Page 8 Thursday, March 9, 2000 3:43 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
9
Filename [HRS7700EU1.fm]
Page 9 March 8, 2000 1:13 pm
S-VIDEO Connection
8 To connect to a TV with S-VIDEO/AUDIO IN
connectors . . .
A
Connect the recorder to TV.
A
Connect the aerial, recorder and TV as per “RF
Connection” (
pg. 8).
B
Connect the recorder’s S OUT connector to the TV’s
S-VIDEO IN connector.
C
Connect the recorder’s AUDIO OUT connectors to the
TV’s AUDIO IN connectors.
B
Connect the recorder to mains.
Plug the end of the mains power cord into a mains outlet.
NOTES:
You can obtain high-quality S-VHS pictures.
With S-VIDEO connection, you cannot use the Preset
Download function (
pg. 12).
If your TV is not stereo-capable, use the recorder’s AUDIO
OUT connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction. (
pg. 47)
To operate the recorder with your TV using the S-VIDEO
connection, set your TV to its AV mode.
For switching the TV’s mode, refer to the instruction manual of
your television.
Back of TV
Aerial connector
S-VIDEO IN
connector
AUDIO IN connectors
S-Video cable
(not provided)
Audio cable
(not provided)
Mains outlet
Mains power
cord
Back of recorder
RF cable (provided)
S OUT
AUDIO OUT
TV aerial cable
After the connection is completed, perform “Auto Set
Up” on page 10.
HRS7700EU1.fm Page 9 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
10
EN
Page 10 March 8, 2000 1:13 pm
INITIAL SETTINGS
Auto Set Up
Auto Channel Set/Auto Clock Set/
Auto Guide Program Number Set
A
Turn on the recorder.
Press
1
on the recorder or remote control. The Country
Set display appears on the front display panel and/or on
the TV screen.
B
Select your country.
On the front display panel
Press
rt
to select your international telephone country
code of your country referring to the chart in the left
column.
(Example) DEUTSCHLAND (49) is selected.
NOTES:
If you have selected BELGIUM (32) or SUISSE (41), go to
step
3
.
If you have selected MAGYARORSZÁG (36),
C
ESKÁ
REPUBLIKA (42), POLSKA (48), РОССИЯ (07) or OTHER
EASTERN EUROPE (EE), press
OK
. The Clock Set screen
appears. Set the clock manually (
pg. 60), then go to step
4
.
If you have selected any other country name (code), press
OK
and go to step
4
.
After the
1 button on the recorder or remote control is
pressed for the first time to power on the recorder
, by simply
selecting your country*, the Auto Set Up function sets the
tuner channels, clock** and Guide Program numbers
automatically.
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also
need to select your language.
**If you live in Hungary (MAGYARORSZÁG), Czech Republic (
C
ESKÁ
REPUBLIKA), Poland (POLSKA), Russia (
РОССИЯ
) or other
countries in Eastern Europe (OTHER EASTERN EUROPE), set the
clock manually.
International Telephone Country Code
BELGIUM
C
ESKÁ REPUBLIKA
DANMARK
DEUTSCHLAND
ESPAÑA
GREECE
ITALIA
MAGYARORSZÁG
NEDERLAND
NORGE
:
:
:
:
:
:
:
:
:
:
32
42
45
49
34
30
39
36
31
47
ÖSTERREICH
POLSKA
PORTUGAL
SUISSE
SUOMI
SVERIGE
РОССИЯ
OTHER WESTERN EUROPE
OTHER EASTERN EUROPE
:
:
:
:
:
:
:
:
:
43
48
351
41
358
46
07
– –
EE
Before starting, make sure of the following:
The TV aerial cable should be connected to the recorder.
The recorder’s mains power cord should be connected to a
mains outlet.
If you want to use the on-screen display, the TV should be
set to its AV mode (with AV or S-VIDEO connection
pg. 8, 9) or UHF channel 36 (with RF connection
pg. 8).
NOTE:
If you have connected your TV to
the recorder with RF connection
and the on-screen display
appearing on UHF channel 36
looks distorted, perform “Video
Channel Set” on page 58.
On the on-screen display
Press
rt
to move the
highlight bar (pointer) to your
country’s name.
HRS7700EU1.fm Page 10 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
11
Filename [HRS7700EU1.fm]
Page 11 March 8, 2000 1:13 pm
C
Select the language.
Press
OK
. The Language Set display appears on the front
display panel and/or on the TV screen.
On the front display panel
Press
rt
to select your language code.
(Example) DEUTSCH (02) is selected for SUISSE (41).
D
Perform Auto Set Up.
Press
OK
. The AUTO SET/T-V LINK display appears on
the front display panel and/or on the TV screen.
On the front display panel
Press
rt
to select “Auto” and press
OK
or
e
.
If you have connected the recorder to your TV via the AV
connection (
pg. 8), the recorder will automatically perform
Preset Download (
pg. 12) instead of the Auto Set Up.
NOTES:
In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the recorder can perform neither
Auto Clock Set nor Auto Guide Program Number Set.
If there is a power cut, or if you press
1 or
MENU
while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the recorder power once and try again from step
1
.
Auto Clock Set may not function properly depending on the
reception condition.
If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels
(
pg. 55, “INFORMATION”).
Language Code
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
CASTELLANO
NEDERLANDS
SVENSKA
:
:
:
:
:
:
:
01
02
03
04
05
06
07
NORSK
SUOMI
DANSK
POLSKI
C
E
c
TINA
MAGYAR
ЯЗЫК
:
:
:
:
:
:
:
08
09
10
11
12
13
14
On the on-screen display
Press
rt
to move the
highlight bar (pointer) to the
language of your choice.
On the on-screen display
Press
rt
to move the
highlight bar (pointer) to
AUTO SET” and press
OK
or
e
.
Auto” blinks on the front display panel; do NOT press
any button on the recorder or remote control until the
front display panel shows clock time, “(CH) 1” or
– –:– –
” as illustrated on page 13.
International telephone
country code
Language code
If you are using the on-screen
display, the AUTO SET
screen will appear. As Auto
Set Up progresses, the “
q
mark on the TV screen
moves from left to right.
When the Auto Set Up is
completed, “SCAN
COMPLETED” appears for
about 5 seconds, then the
normal screen appears.
ATTENTION
Once you have performed Auto Set Up, even if the recorder’s
memory backup has expired, all the stored stations and their
Guide Program numbers remain in the recorder’s memory
and the recorder will not perform Auto Set Up again. You
only need to set the clock. (
pg. 60)
If you have moved to a different area, perform each setting as
required.
Video channel setting (for RF connection users)
pg. 58
Tuner setting
pg. 52
Clock setting
pg. 60
If a new station starts broadcasting in your area, perform
tuner setting (
pg. 52) and, if necessary, video channel
setting (
pg. 58).
Beginning End
HRS7700EU1.fm Page 11 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
12
EN
Page 12 March 8, 2000 1:13 pm
INITIAL SETTINGS (cont.)
Preset Download
Auto Channel Set by Downloading
from TV/Auto Clock Set/Auto Guide
Program Number Set
NOTES:
For details, refer to the instruction manual of your TV.
In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the recorder can perform neither
Auto Clock Set nor Auto Guide Program Number Set.
If there is a power cut, or if you press
1 or
MENU
while
downloading or set up is in progress, it will be interrupted; be
sure to turn off the recorder power once and try again from the
beginning.
Auto Clock Set may not function properly depending on the
reception condition.
On this recorder, the characters available for station names
(ID) are A–Z, 0–9, –,
f, + and I (space). Some names of
downloaded stations may differ from those of your TV
(
pg. 56).
If you have connected the recorder to your TV via the AV
connection (
pg. 8), the recorder will automatically perform
Preset Download instead of the Auto Set Up in step
4
on page
11. After downloading, the recorder sets the clock and Guide
Program numbers automatically.
A
Perform Preset Download.
Press
OK
. The AUTO SET/T-V LINK display appears on
the front display panel and/or on the TV screen.
On the front display panel
Press
rt
to select “CH – –” and press
OK
or
e
.
B
Set the video channel.
Set the video channel to off manually. (
pg. 58)
ATTENTION
You can use this function only with a TV offering T-V Link,
etc.* Be sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-
wired 21-pin SCART cable. The degree of compatibility and
available functions may differ by system.
Perform steps
1
to
3
of “Auto Set Up” on page 10 before
continuing.
On the on-screen display
Press
rt
to move the
highlight bar (pointer) to
“T-V LINK” and press
OK
or
e
.
Preset positions on the front display panel increase from
“CH1”; do NOT press any button on the recorder or remote
control until the front display panel shows clock time,
“(CH) 1” or “– –:– –” as illustrated on page 13.
If you are using the on-screen
display, the T-V LINK screen
will appear. Then the GUIDE
PROG SET screen will appear
during Guide Program
Number Set. When Preset
Download is completed,
“COMPLETED” appears for
about 5 seconds, then the
normal screen appears.
If you press any button on the
recorder or remote control
while downloading is in
progress, it will be interrupted.
HRS7700EU1.fm Page 12 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-Full-NoTitle0
EN
13
Filename [HRS7700EU1.fm]
Page 13 March 8, 2000 1:13 pm
Results of Auto Set Up/Preset Download appear on the front display panel
If both Auto Channel Set and Auto Clock Set have been performed successfully, the
correct current time is displayed.
Turn on the TV and select its video channel or AV mode, then make sure that all necessary stations
have been stored in the recorder’s memory by using the
PR
button(s).
If station names (ID –
pg. 57) have also been stored in the recorder’s memory, the station name
will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is
tuned to a different station.
If you want to set the tuner manually such as to add or skip channels, to change channel
positions, or to set or change station names, see pages 54 – 57.
If Auto Channel Set has succeeded but Auto Clock Set has not, “1” (channel position) is
displayed.
A
Turn on the TV and select its video channel or AV mode, then make sure that all necessary
stations have been stored in the recorder’s memory by using the
PR
button(s).
If station names (ID –
pg. 57) have also been stored in the recorder’s memory, the station name
will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is
tuned to a different station.
If you want to set the tuner manually such as to add or skip channels, to change channel
positions, or to set or change station names, see pages 54 – 57.
B
Perform “Clock Set” on page 60.
If both Auto Channel Set and Auto Clock Set have failed, “– –:– –” is displayed.
Make sure the cables are connected properly and turn off the recorder’s power once, then turn the
recorder’s power back on again.
The Country Set display appears on the front display panel and/or on the TV screen; perform “Auto
Set Up” on page 10 or “Preset Download” on page 12 again.
IMPORTANT
To check if the Guide Program numbers have been set correctly, perform the S
HOW
V
IEW
Timer Programming (
pg. 28).
In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work
properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the S
HOW
V
IEW
system, the recorder will record a TV programme of a different station. When programming the timer using the S
HOW
V
IEW
system, be sure to check the desired channel is selected correctly (
pg. 28, “S
HOW
V
IEW
®
Timer Programming”).
Your video recorder memorizes all detected stations even if reception of some of them is poor. You can delete those stations with
an unacceptable picture (
pg. 55, “Delete A Channel”).
INFORMATION
Language for the on-screen display
Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made in
step
2
on page 10 (unless you have selected BELGIUM or SUISSE), as shown below.
If you want to change the language setting manually, see “Language” on page 14.
Just Clock
Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at
regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON”
(
pg. 60, “Just Clock”).
SUOMI
]
SUOMI DANMARK
]
DANSK NEDERLAND
]
NEDERLANDS
PORTUGAL
]
ENGLISH ÖSTERREICH
]
DEUTSCH GREECE
]
ENGLISH
DEUTSCHLAND
]
DEUTSCH
C
ESKÁ REPUBLIKA
]
C
E
c
TINA РОССИЯ
]
ЯЗЫК
POLSKA
]
POLSKI ITALIA
]
ITALIANO OTHER WESTERN EUROPE
]
ENGLISH
NORGE
]
NORSK MAGYARORSZÁG
]
MAGYAR OTHER EASTERN EUROPE
]
ENGLISH
SVERIGE
]
SVENSKA ESPAÑA
]
CASTELLANO
HRS7700EU1.fm Page 13 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
14
EN
Page 14 March 8, 2000 1:13 pm
INITIAL SETTINGS (cont.)
Language
This recorder offers you the choice to view on-screen
messages in 14 different languages. Though Auto Set Up
selects the language automatically (
pg. 13), you can
change the language setting manually as required.
A
Access the Main Menu screen.
Press
MENU
.
B
Access the Country Set screen.
C
Select your country.
Press
rt
to move the highlight bar (pointer) to your
country’s name, then press
OK
or
e
.
D
Select the language.
E
Return to the normal screen.
Press
MENU
.
Turn on the TV and select the video channel (or
AV mode).
Press
rt
to move the
highlight bar (pointer) to
AUTO CH SET”, then press
OK
or
e
.
Press
rt
to move the
highlight bar (pointer) to the
language of your choice.
You do not have to press
OK
;
pressing
OK
enters AUTO SET/
T-V LINK screen.
HRS7700EU1.fm Page 14 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right
EN
15
Filename [HRS7700EU1.fm]
Page 15 March 8, 2000 1:13 pm
SAT CONTROL SET
Satellite Receiver
Control Setting
The following procedure is required if you receive
satellite channels through a satellite receiver.
Approximately 20 seconds before the S
HOW
V
IEW
timer
programming (
pg. 28) or Express timer programming
(
pg. 30) starts, the recorder sets its input mode to “L-2”
and automatically switches the satellite receiver’s
channels using the provided Satellite Controller.
Installing Satellite Controller
A
Situate the Satellite Controller.
Place the Satellite Controller so that the path between its
transmitter and the satellite receiver’s remote sensor is
unobstructed.
B
Attach the Satellite Controller.
Fix securely using the adhesive strip attached on the back
of the Satellite Controller.
C
Make connections.
Be sure to connect the recorder’s AV2 (L-2) IN/DECODER
connector to the satellite receiver’s 21-pin SCART
connector.
NOTE:
When connecting your satellite receiver, refer to its instruction
manual.
D
Connect the Satellite Controller to recorder.
Connect the Satellite Controller to the SAT CTL connector
on the rear panel.
Satellite receiver
Satellite Controller
(suggested locations)
Transmitter
21-pin SCART
cable
(not provided)
SAT CTL
AV2 (L-2) IN/DECODER
Your recorder
Satellite Controller
Back of recorder
Satellite receiver
HRS7700EU1.fm Page 15 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
16
EN
Page 16 March 8, 2000 1:13 pm
SAT CONTROL SET (cont.)
Setting satellite receiver's brand and
channel
After installation, set the satellite receiver’s brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
A
Turn on the satellite receiver.
Turn on the satellite receiver’s power.
B
Access the Main Menu screen on the
recorder.
Press
MENU
.
C
Access the Initial Set screen.
Press
rt
to move the highlight bar (pointer) to “INITIAL
SET”, then press
OK
or
e
.
D
Access the Sat Control Set screen.
E
Enter the satellite receiver’s brand.
F
Select the satellite receiver’s channel for
testing.
Turn on the TV and select the video channel (or AV
mode).
Press
rt
to move the
highlight bar (pointer) to
“SAT CONTROL SET”, then
press
OK
or
e
.
Press the appropriate
NUMBER
keys to enter the
brand code from the list on
page 17, then press
OK
.
If the brand code you entered
is invalid, the code field will
be reset. Enter the correct
brand code again.
If the recorder is in playback or
recording mode, you cannot
set the brand code.
Press the appropriate
NUMBER
keys to enter one
of the channel positions on
the satellite receiver, then
press
OK
.
You can select the channel
position between 1 to 999.
After pressing
OK
, the recorder
enters the Test mode.
HRS7700EU1.fm Page 16 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-2lineTitle0
EN
17
Filename [HRS7700EU1.fm]
Page 17 March 8, 2000 1:13 pm
SAT CONTROL SET (cont.)
T-V LINK
G
Check the result of the test.
If the satellite receiver’s
channel number has been
changed to the same one as
you set in step 6 ...
Press
rt
to move the highlight
bar (pointer) to “CHANGED
TO ...”, then press
OK
or
e
to
finish the Sat Control Set mode.
If the satellite receiver’s
channel number has not been changed correctly ...
Press
rt
to move the highlight bar (pointer) to “NOT
CHANGED”, then press
OK
or
e
. Then perform the
procedure again from step
5
.
NOTES:
The Satellite Controller may not work with all types of satellite
receiver.
For some satellite receivers, you need to set its channel input
mode to 2-digit.
If your satellite receiver has more than two channel modes, be
sure to set to “All Channel Mode”. For details, refer to the
instruction manual of the satellite receiver.
When selecting the satellite receiver’s channel (
step
6
),
signals from the remote control may interfere with signals
transmitted from the Satellite Controller. In this case, move the
remote control as close to the recorders infrared beam
receiving window as possible.
T-V Link Functions
When you connect the recorder to your TV via a fully-wired
21-pin SCART cable (
pg. 8), the following functions are
available. You can use these functions only with a TV offering
T-V Link, etc.*
For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired
21-pin SCART cable. The degree of compatibility and available
functions may differ by system.
NexTView Link
You can download the EPG (Electronic Programme Guide)
information from your TV for timer-programming on the
recorder.
For details, refer to the instruction manual of your TV.
TV Auto Power On
The TV will turn on and be set to its AV mode automatically
whenever you play a tape.
For details, refer to the instruction manual of your TV.
VCR Auto Standby
You can use your TV’s remote control to turn off the recorder.
For details, refer to the instruction manual of your TV.
Direct Rec
You can easily start recording the programme that you are
watching on your TV. When you use this function, set “DIRECT
REC” to “ON” (
pg. 49).
BRAND NAME CODE
JVC
AMSTRAD
CANAL SATELLITE
CANAL +
D-BOX
ECHOSTAR
ECHOSTAR (VIA DIGITAL)
FINLUX
FORCE
GALAXIS
GRUNDIG
HIRSCHMANN
ITT NOKIA
JERROLD
KATHREIN
LUXOR
MASCOM
MASPRO
NOKIA
PACE
PANASONIC
PHILIPS
RFT
SAGEM
SALORA
SIEMENS
SKYMASTER
TPS
TRIAX
WISI
73
60, 61, 62, 63, 92
81
81
85
78, 79, 80
82
68
89
88
64, 65
64, 78
68
75
70, 71
68
93
70
87
65, 67, 74, 86, 92
74
66, 84
69
83
68
64
69
83
91
64
HRS7700EU1.fm Page 17 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
18
EN
Page 18 March 8, 2000 1:13 pm
PLAYBACK
Basic Playback
A
Load a cassette.
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointed toward the recorder.
Don’t apply too much pressure when inserting.
The recorder’s power comes on automatically and the counter
is reset to “0:00:00”.
If the record safety tab has been removed, playback begins
automatically.
B
Find the programme start point.
If the tape is advanced past the start point, press
3
or
turn the
SHUTTLE
ring to the left. To go forward, press
5
or turn the
SHUTTLE
ring to the right.
C
Start playback.
Press
4
. “BEST” appears blinking in the recorder’s front
display panel during automatic tracking. (
pg. 27)
D
Stop playback.
Press
8
on the remote control or
0
on the recorder’s
front panel. Then press
0
to remove the cassette.
Turn on the TV and select the video channel (or
AV mode).
Clean the video heads using a dry cleaning
cassette — TCL-2UX — when:
Rough, poor picture appears while a tape is played back.
The picture is unclear or no picture appears.
“USE CLEANING CASSETTE” appears on the screen (only
with “O.S.D.” set to “ON” (
pg. 49)).
Usable cassettes
Compact VHS camcorder recordings can be played on this
video recorder. Simply place the recorded cassette into a
VHS Cassette Adapter and it can be used just like any full-
sized VHS cassette.
This video recorder can record on regular VHS and Super
VHS cassettes. While only VHS signals can be recorded on
regular VHS cassettes*, both VHS and Super VHS signals
can be recorded and played back using Super VHS
cassettes.
* By using the S-VHS ET function, it is possible to record and
play back with S-VHS picture quality on VHS cassettes
with this recorder.
HRS7700EU1.fm Page 18 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
19
Filename [HRS7700EU1.fm]
Page 19 March 8, 2000 1:13 pm
Playback Features
NOTE:
Refer to the
SHUTTLE
ring
illustration on the
right as you read
the following
procedures.
Still Picture/Frame-By-Frame
Playback
1
Pause during playback.
Press
9
.
If there is vertical jitter, use the
PR
buttons to correct the
picture.
2
Activate frame-by-frame playback.
Turn the
JOG
dial to the right for forward frame-by-frame
playback, or to the left for reverse frame-by-frame
playback.
OR
Press
9
.
OR
Press
w
or
e
.
Slow Motion
During playback or still, turn the
SHUTTLE
ring to the
right for forward slow motion, or to the left for reverse
slow motion (refer to the illustration on the left).
OR
During still picture, press and hold
9
for 2 seconds, then
release. Press and release again to return to still picture.
OR
During still picture, press and hold
w
or
e
. Release to
return to still picture.
Variable Speed Search
During playback or still, turn the
SHUTTLE
ring to the
right for forward variable-speed search, or to the left for
reverse variable-speed search (refer to the illustration on
the left).
OR
During playback, press
w
or
e
.
The more times you press, the faster the playback picture
moves.
To decrease speed, press the button for the opposite direction.
ATTENTION
Picture may not appear during high-speed search with an
LP-recorded tape.
In the high-speed search, still, slow motion or frame-by-
frame playback mode, the picture will be distorted, and
there will be a loss of colour.
When normal playback resumes from search, still, slow
motion or frame-by-frame playback, the picture may jitter
vertically momentarily depending on the type of TV being
used.
To resume normal playback, press
4
.
HRS7700EU1.fm Page 19 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
20
EN
Page 20 March 8, 2000 1:13 pm
PLAYBACK (cont.)
Skip Search
During playback, press
30 SEC
1 to 4 times to skip over
unwanted sections.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
High-Speed (Turbo) Search
During playback or still, turn the
SHUTTLE
ring all the
way to the right for forward high-speed search, or to the
left for reverse high-speed search. Releasing
SHUTTLE
ring resumes still picture playback.
For forward high-speed search, turn the
SHUTTLE
ring all the
way to the right and release it within 1 second.
For reverse high-speed search, turn the
SHUTTLE
ring all the
way to the left and release it within 1 second.
OR
During playback or still, press
5
for forward high-
speed search, or
3
for reverse high-speed search.
NOTE:
For short searches, press and hold 5 or 3 for over 2
seconds during playback or still picture. When released, normal
playback resumes.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
Activate Instant ReView.
Press
REVIEW
. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
The front display panel tells you how many programmes have
been timer-recorded. If you have, for example, 3 programmes,
“REVIEW” and “3” appear and blink. To watch the first of the 3
programmes, press
REVIEW
three times
. The recorder searches
and begins playback automatically. You can access a
programme as far as 9 index codes away from the current tape
position.
Instant ReView is not possible while the recorder is in the
Timer mode.
The number of recorded programmes will not be displayed on
the front display panel after Automatic Satellite Programme
Recording (
pg. 34).
To resume normal playback during a Skip Search,
press
4
.
To resume normal playback, press
4
.
HRS7700EU1.fm Page 20 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
21
Filename [HRS7700EU1.fm]
Page 21 March 8, 2000 1:13 pm
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Activate Index Search.
Press
w
or
e
(
2
or
6
). “
2
1” or “
6
1” is
displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press
w or e repeatedly
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
w
twice.
To locate the beginning of D from the current position, press
e
once.
When the specified index code is located, playback begins
automatically.
Next Function Memory
The Next Function Memory “tells” the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a-
For Automatic Start Of Playback
Press
3
, then press
4
within 2 seconds.
b-
For Automatic Power Off
Press
3
, then press
1
within 2 seconds.
c-
For Automatic Timer Standby
Press
3
, then press
#
(
TIMER
) within 2 seconds.
Manual Tracking
Your recorder is equipped with automatic tracking control.
During playback, you can override this and adjust the tracking
manually by pressing the
PR
buttons.
1
Override automatic tracking.
Press
p
on the remote control.
2
Adjust the tracking manually.
Press
PR
+
or
.
3
Return to automatic tracking.
Press
p
on the remote control.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Digital TBC/NR
Your recorder is equipped with the Digital TBC (Time Base
Corrector) that removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is on.
We recommend that you use Digital TBC/NR when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this video recorder as the source player for editing.
Activate Digital TBC/NR.
Press
DIGITAL TBC/NR
so that the button lights up.
To turn off Digital TBC/NR, press
DIGITAL TBC/NR
again so
that the light goes off.
NOTES:
If you play back a tape recorded under poor TV reception
condition, the picture may become more stable with Digital
TBC/NR set to off.
When Digital TBC/NR is set to on, if you play back a tape
where certain types of signals are recorded (using a PC or
some character generators), the playback picture may be
distorted. If this is the case, turn off Digital TBC/NR.
When playing back a MESECAM tape, Digital TBC/NR does
not function even though the DIGITAL TBC/NR button is lit.
Current position
Index number
HRS7700EU1.fm Page 21 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
22
EN
Page 22 March 8, 2000 1:13 pm
PLAYBACK (cont.)
Repeat Playback
Your recorder can automatically play back the whole tape 100
times repeatedly.
1
Start playback.
Press
4
.
2
Activate Repeat Playback.
Press
4
and hold for over 5 seconds, then release.
The Play indicator (
u) on the front display panel blinks
slowly.
After playing back a tape 100 times, the recorder stops
automatically.
3
Stop Repeat Playback.
Press
8
at any time.
Pressing
4, 3, 5 or 9 also stops Repeat Playback.
Soundtrack Selection
Your recorder is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing
AUDIO
on the remote control changes the soundtrack
as follows:
NOTES:
a + s” should normally be selected. In this mode, Hi-Fi
stereo tapes are played back in stereo, and the normal audio
track is played back automatically for tapes with only normal
audio.
For instructions on recording stereo and bilingual
programmes, refer to page 26.
“O.S.D.” must be set to “ON” or the on-screen displays will
not appear (
pg. 49).
TRACK
USE
Recorder’s Front
Display Panel
On-Screen
Display
a
+
s
HI FI
L
j
h
R
For Hi-Fi stereo
tapes
a
HI FI
L
j
For main audio of
Bilingual tapes
s
HI FI
h
R
For sub audio of
Bilingual tapes
NORM NORM
For audio-dubbed
tapes
a
+
s
+ NORM
HI FI
NORM
For audio-dubbed
tapes
HRS7700EU1.fm Page 22 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right
EN
23
Filename [HRS7700EU1.fm]
Page 23 March 8, 2000 1:13 pm
RECORDING
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
The recorder’s power comes on automatically and the counter
is reset to “0:00:00”.
B
Choose a programme.
Press
PR +/–
or the
NUMBER
keys to select the channel
you wish to record.
C
Set the tape speed.
Press
SP/LP
(
p
). Check the SP/LP indicator on the
recorder’s front display panel to confirm the selected tape
speed.
D
Start recording.
Press and hold
7
and press
4
on the remote control, or
press
7
on the recorder.
E
Pause/Resume recording.
Press
9
. Press
4
to resume recording.
F
Stop recording.
Press
8
on the remote control or
0
on the recorder.
Then press
0
to remove the cassette.
Turn on the TV and select the video channel (or
AV mode).
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (
pg. 24) or timer recording (
pg. 28, 30), the
recording will resume automatically when power is restored
to the recorder unless the recorder’s memory backup has
expired.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP recording after inserting the cassette. (
pg. 27)
If “DIRECT REC” is set to “ON”, the programme that appears
on the TV screen will be recorded (
pg. 49).
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
HRS7700EU1.fm Page 23 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
24
EN
Page 24 March 8, 2000 1:13 pm
RECORDING (cont.)
Recording Features
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
1
Start recording.
Press
7
on the recorder.
2
Engage the ITR mode.
Press
7
again. “
o
” blinks and “0:30” appears on the front
display panel.
3
Set the recording duration.
If you want to record for more than 30 minutes, press
7
to extend the time. Each press extends recording time by
30 minutes.
NOTE:
You can only perform ITR using the 7 button on the recorder’s
front panel.
Record One Programme While
Watching Another
If your recorder is connected to the TV via the AV
connection, press
TV/VCR
. The recorder’s VCR indicator
and the TV broadcast being recorded disappear. Once
recording is in progress, all you need to do is to set the
channel controls on the TV for the station you wish to
view.
The programme selected with the TV’s channel controls
appears on the TV screen, while the one selected with the
recorder’s
PR
buttons is recorded on the tape.
If a decoder is connected to the recorder (
pg. 46), you can
select a scrambled channel as well with the TV channel
controls.
HRS7700EU1.fm Page 24 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
25
Filename [HRS7700EU1.fm]
Page 25 March 8, 2000 6:16 pm
Elapsed Recording Time Indication
1
Set the counter display.
Press
– –:– –
until a counter reading appears on the front
display panel.
2
Reset the counter.
Press
0000
before starting recording or playback.
The counter is reset to “0:00:00” and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Tape Remaining Time
Press
– –:– –
until the time remaining on the tape appears.
The front display panel shows the tape remaining time with
y” displayed.
By pressing the
– –:– –
button, you can change the display to
show the counter reading, channel position*, clock time or
tape remaining time.
* Channel position is not displayed during playback.
NOTE:
Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
“– –:– –” may sometimes appear, or the display may blink on
occasion.
Super VHS ET (S-VHS ET)
— Recording on VHS cassettes with
S-VHS quality
You can record in SP mode on VHS cassettes with S-VHS picture
quality. Tapes recorded using this function can be played back
on a recorder equipped with the S-VHS ET function.
You can activate the S-VHS ET function only before you start
recording on a VHS cassette.
Before recording, make sure that “B.E.S.T.” is set to “ON”.
(
pg. 49)
Engage the S-VHS ET mode.
Press
S-VHS ET
on the recorder. The button lights up.
The S-VHS indicator lights up on the front display panel.
To disengage the S-VHS ET mode, press
S-VHS ET
. The button’s
light goes off.
NOTES:
You cannot activate the S-VHS ET function ...
... while recording is in progress.
... while timer-recording or Instant Timer Recording
(
pg. 24) is in progress.
... while B.E.S.T. (
pg. 27) is in progress.
The S-VHS ET function does not work ...
... with S-VHS cassettes.
... with recordings in LP mode.
To keep the highest quality recording and playback pictures
over a long period of time, S-VHS recording on S-VHS
cassettes is recommended.
Use of high grade tapes is recommended for S-VHS ET
recordings. On some tapes, picture quality will not improve
even if the S-VHS ET function is used. Check the recording
quality before you start important recordings.
You can play back a tape recorded using the S-VHS ET
function on most of S-VHS recorders and of VHS recorders
equipped with SQPB (S-VHS QUASI PLAYBACK) function.
(Notice some recorders are not compatible with the S-VHS ET
function.)
While playing back a tape recorded using the S-VHS ET
function on some recorders, noise may appear. (If playback
picture becomes blurred or interrupted, use a cleaning
cassette.)
In the high-speed search, still, slow-motion or frame-by-frame
playback modes (
pg. 19,
20), noise may appear. If these
modes are performed frequently on a tape recorded using the
S-VHS ET function, the tape may be damaged and the picture
may be deteriorated.
HRS7700EU1.fm Page 25 Wednesday, March 8, 2000 6:16 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU1.fm]
Masterpage:Left
26
EN
Page 26 March 8, 2000 1:13 pm
RECORDING (cont.)
Retake
You can cut out unnecessary parts of a TV programme while you
are recording it.
1
Engage the Record-Pause mode.
Press
9
during recording.
2
Locate the start point.
Turn the
JOG
dial to the left or right (or hold down
3
or
5
) and release it when you reach the point where
you want to resume recording.
Your recorder returns to the Record-Pause mode.
3
Resume recording.
Press
4
when you wish to resume recording.
NOTE:
Retake function does not work during Direct Rec (
pg. 17, 49).
Receiving Stereo and Bilingual
Programmes
Your recorder is equipped with a Sound-Multiplex decoder (A2)
and a Digital stereo sound decoder (NICAM) making reception
of stereo and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
To listen to a stereo programme, press
AUDIO
until “
a” and
s” appear on the front display panel or “HIFI L jhR”
appears on the TV screen.
To listen to a bilingual programme, press
AUDIO
until “
a” or
s” appears on the front display panel, or “HIFI L j” or
“HIFI
h R” appears on the TV screen (as required).
To listen to the standard (Regular Monaural) audio while
receiving a NICAM broadcast, press
AUDIO
until “NORM”
appears on the front display panel or the TV screen.
NOTE:
“O.S.D.” must be set to “ON” or the on-screen displays will not
appear (
pg. 49).
To Record Stereo and Bilingual Programmes (A2)
Stereo programmes are automatically recorded in stereo on the
Hi-Fi audio track (with the normal audio track recording mixed L
and R channel sound).
Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack will be
recorded on the normal audio track.
To Record NICAM Stereo and Bilingual
Programmes
The NICAM audio programme will be recorded on the Hi-Fi
audio track, and the standard audio programme will be recorded
on the normal audio track.
NOTES:
If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
Before playing back a programme recorded in stereo, or a
bilingual programme, refer to “Soundtrack Selection” on page
22.
End of programme Beginning of programme
Recorded part
Go back to end of programme to cut out
unnecessary part
Programme Programme
Unnecessary
part
Unnecessary
part
Type of Broadcast Being
Received
On-screen Display
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
ST
BIL.
(none)
ST NICAM
BIL. NICAM
NICAM
HRS7700EU1.fm Page 26 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
27
Filename [HRS7700EU1.fm]
Page 27 March 8, 2000 1:13 pm
B.E.S.T. Picture
System
The B.E.S.T. (Biconditional Equalised Signal Tracking)
system checks the condition of the tape in use during
playback and recording, and compensates to provide the
highest-possible playback and recording pictures. You
can set “B.E.S.T.” to “ON” or “OFF” to your preference
(
pg. 49).
Playback
The recorder assesses the quality of the tape once you
initiate playback.
The recorder adjusts the playback picture quality based on the
quality of the tape in use.
B.E.S.T. is active during automatic tracking. “BEST” appears
blinking on the recorder’s front display panel.
NOTES:
When watching a tape recorded with “B.E.S.T.” set to “ON”, it
is recommended that you leave B.E.S.T. on during playback as
well.
When watching a rental tape or one recorded on another
video recorder, or when using this recorder as the player for
editing, set B.E.S.T. to your preference (
pg. 49).
“BEST” only appears at the beginning of automatic tracking.
Even though it doesn’t appear after that, the B.E.S.T. function is
operative.
Recording
The recorder assesses the quality of the tape once you
initiate recording.
DURING B.E.S.T.
The recorder spends approximately 7 seconds assessing the
condition of the tape, then begins recording.
NOTES:
The B.E.S.T. system works for both SP and LP modes only after
a tape has been inserted and the Record mode is first initiated.
It does not work during recording.
The B.E.S.T. system does not work while Automatic Satellite
Programme Recording is in progress (
pg. 34).
In the case of timer recordings, the B.E.S.T. system works
before recording is initiated.
Once the cassette is ejected, the B.E.S.T. data is cancelled. The
next time the cassette is used for recording, B.E.S.T. is re-
performed.
Pressing the recorder’s
7 button while “BEST” is displayed
does not start Instant Timer Recording (
pg. 24).
ATTENTION
Since the B.E.S.T. system works before recording actually
starts, there is a delay of approximately 7 seconds after
7
and
4 on the remote control are pressed, or 7 on the
recorder is pressed. To make sure you record the desired
scene or programme in its entirety, first perform the following
steps:
A
Press and hold
9 and press 7 to engage the Record
Pause mode.
The recorder then automatically checks the condition of
the tape and, after approximately 7 seconds, re-enters
Record Pause mode.
B
Press
4 to start recording.
If you want to bypass the B.E.S.T. system and begin recording
immediately, set “B.E.S.T.” to “OFF” (
pg. 49).
B.E.S.T. COMPLETE
HRS7700EU1.fm Page 27 Wednesday, March 8, 2000 1:14 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU2.fm]
Masterpage:Left
28
EN
Page 28 March 9, 2000 11:04 am
TIMER RECORDING
S
HOW
V
IEW
®
Timer
Programming
With the S
HOW
V
IEW
system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
A
Access the S
HOW
V
IEW
screen.
The front display panel looks like this:
B
Enter the S
HOW
V
IEW
number.
The S
HOW
V
IEW
number you enter appears on the front display
panel with only a 4-digit number:
C
Access the S
HOW
V
IEW
Program screen.
The front display panel shows the programme start time. Pressing
" changes the display to the programme stop time, then the
date and channel position.
If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Press
& and input a valid S
HOW
V
IEW
number.
If the “GUIDE PROG SET” screen appears, see “ATTENTION”
on page 29.
Before performing the S
HOW
V
IEW
Timer
Programming:
Make sure that the recorder’s built-in clock is set properly.
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the video channel (or AV mode).
Press
PROG
.
Press the
NUMBER
keys to
enter the S
HOW
V
IEW
number
of a programme you wish to
record.
If you make a mistake, press
&
and input the correct number.
Press
OK
, then the
S
HOW
V
IEW
Program screen
appears (if you’re just starting
out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see “S
HOW
V
IEW
®
Setup” on page 59 and set
the Guide Program number correctly.
HRS7700EU2.fm Page 28 Thursday, March 9, 2000 11:04 AM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
29
Filename [HRS7700EU2.fm]
Page 29 March 8, 2000 1:33 pm
D
Set the tape speed.
Press
SP/LP
(
p
).
E
Set the VPS/PDC mode.
Press
VPS/PDC
to select “ON” or “OFF”.
If “VPS/PDC ON” is displayed on the TV screen or “VPS/PDC”
is lit on the front display panel, VPS/PDC is set to ON.
If “VPS/PDC OFF” is displayed on the TV screen or “VPS/PDC”
is not lit on the front display panel, VPS/PDC is set to OFF.
“VPS/PDC Recording” on page 31.
F
Return to the normal screen.
Press
PROG
or
OK
. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears. If “PROGRAM OVERLAPPED” appears
on the TV screen and “Err” on the front display panel, see
page 33.
Repeat steps
1
6
for each additional programme.
G
Engage the recorder’s timer mode.
Press
#
(
TIMER
). The recorder turns off automatically
and “
#
” appears on the front display panel.
To disengage the timer mode, press
# (
TIMER
) again.
NOTES:
To Change The Stop Time . . .
. . . press
STOP
+/–
after pressing
OK
in step
3
. You can
compensate for anticipated programme schedule delays.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing
OK
in step
3
, press
WEEKLY
(
NUMBER
key
9
”) for weekly serials or
DAILY
(
NUMBER
key “
8
”) for daily
serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes (
pg. 32).
It is not possible to timer-record a TV programme with a
S
HOW
V
IEW
number which starts with “0”.
Satellite Receiver Users
To timer-record a satellite broadcast using the S
HOW
V
IEW
system:
A Perform “Satellite Receiver Control Setting” on page 15.
B Perform steps
1
7
. In step
3
, the front display panel
shows “L2” for the channel position. In step
5
, you cannot
set “VPS/PDC” to “ON”.
C Leave the satellite receiver’s power on.
ATTENTION
Guide Program Number Set
“GUIDE PROG SET” appears after performing step
3
if the
Guide Program number for the S
HOW
V
IEW
number you
entered has not been set.
If you want to set the Guide Program number for the satellite
broadcast station, press the
NUMBER
key “
0
” to change “TV
PROG” to “SAT”. Press
rt to input the channel position
number on which your recorder or satellite receiver receives
that station, then press
OK
or
e to set the Guide Program
number. The S
HOW
V
IEW
Program screen appears.
(Example)
To timer-record a ZDF
programme with the
S
HOW
V
IEW
system.
* If your recorder receives ZDF on
the channel position 2, press
OK
or
e
after entering “2”.
HRS7700EU2.fm Page 29 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU2.fm]
Masterpage:Left
30
EN
Page 30 March 9, 2000 11:04 am
TIMER RECORDING (cont.)
Express Timer
Programming
If you don’t know the S
HOW
V
IEW
number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
A
Access the S
HOW
V
IEW
screen.
Press
PROG
.
B
Access the Programme screen.
The front display panel looks like this:
C
Enter the programme start time.
The front display panel looks like this:
D
Enter the programme stop time.
Press
STOP+/–
to enter the time you want recording to
stop.
Press and hold
STOP+/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter the programme date.
Press
DATE+/
.
The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programming:
Make sure that the recorder’s built-in clock is set properly.
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the video channel (or AV mode).
Press
START+/–
. (If you’re
just starting out, “P1”
appears.)
Press
START+/–
to enter the
time you want recording to
start.
Press and hold
START+/–
to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
HRS7700EU2.fm Page 30 Thursday, March 9, 2000 11:05 AM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
31
Filename [HRS7700EU2.fm]
Page 31 March 8, 2000 1:33 pm
F
Enter the channel position.
G
Set the tape speed.
Press
SP/LP
(
p
).
H
Set the VPS/PDC mode.
Press
VPS/PDC
to select “ON” or “OFF”.
If “VPS/PDC ON” is displayed on the TV screen or “VPS/PDC”
is lit on the front display panel, VPS/PDC is set to ON.
If “VPS/PDC OFF” is displayed on the TV screen or “VPS/PDC”
is not lit on the front display panel, VPS/PDC is set to OFF.
“VPS/PDC Recording” in the right column
I
Return to the normal screen.
After confirming all information is correct, press
PROG
or
OK
. “PROGRAM COMPLETED” appears on the TV
screen for about 5 seconds, then the normal screen
appears. If “PROGRAM OVERLAPPED” appears on the
TV screen and “Err” on the front display panel, see
page 33.
Repeat steps
1
9
for each additional programme.
J
Engage the recorder’s timer mode.
Press
#
(
TIMER
). The recorder turns off automatically
and “
#
” appears on the front display panel.
To disengage the timer mode, press
# (
TIMER
) again.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps
2
through
9
, press
WEEKLY
(
NUMBER
key “
9
”) for weekly serials or
DAILY
(
NUMBER
key “
8
”) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.
NOTE:
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on the TV screen and “FULL”
appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary programmes
(
pg. 32).
Press
PR+/–
.
Satellite Receiver Users
To timer-record a satellite broadcast using Express Timer
Programming:
A Perform “Satellite Receiver Control Setting” on page 15.
B Perform steps
1
10
. In step
6
, press the
NUMBER
key
0
” to change “TV PROG” to “SAT”. The front display
panel shows “L2” for the channel position. Then press
PR+/–
to enter the channel position for the satellite
broadcast. In step
8
, you cannot set “VPS/PDC” to “ON”.
C Leave the satellite receiver’s power on.
VPS/PDC Recording
Now available from some TV stations, PDC (Programme
Delivery Control) and VPS (Video Programme System) are
service designed to assure safe, accurate timer recording.
With this system, special code signals are transmitted
together with the audio/video signals. These code signals
control your video recorder and have precedence over the
advertised times you may have preset into the timer. This
means that your recorder will start and stop recording when
the preset TV programmes actually start and end — even if
the broadcast time of a preset TV programme is changed.
NOTES:
When you use Express Timer Programming, set the start
time (VPS or PDC time) exactly as advertised in the TV
listing. A different time than advertised will result in no
recording.
VPS/PDC recording is also possible when a satellite
receiver or a cable system is connected to AV2 (L-2) IN/
DECODER connector on your recorder.
VPS/PDC recording is also possible via the AV1 (L-1) IN/
OUT connector.
How to check if the station being received transmits a
VPS/PDC signal
A Press
– –:– –
until the channel position appears on the
front display panel.
B Hold down
START+
for about 5 seconds.
“VPS/PDC” appears blinking on the front display panel.
If a VPS/PDC signal is detected from the station,
“VPS/PDC” will stop blinking.
If no VPS/PDC signal is detected from the station,
“VPS/PDC” will blink at a slower rate.
C Press
– –:– –
or
START+
again to return to normal display.
HRS7700EU2.fm Page 31 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU2.fm]
Masterpage:Left
32
EN
Page 32 March 8, 2000 1:33 pm
TIMER RECORDING (cont.)
Check, cancel and change programmes
A
Disengage the timer mode.
Press
#
(
TIMER
), then press
1
.
B
Access the Programme Check screen/display.
C
Access the Programme screen/display.
The front display panel shows the programme start time. Pressing
OK
changes the display to the programme stop time, then the
date and the channel position.
To cancel or change a programme...
D
Cancel or change a programme.
Press
&
to cancel a programme. To change programme
settings, press the appropriate button:
START+/–
,
STOP+/–
,
DATE+/
,
PR+/–
,
VPS/PDC
and/or
SP/LP
(
p
).
You can change “TV PROG” to “SAT” for the channel position
by pressing the
NUMBER
key “
0
”.
E
Return to the normal screen/display.
Press
"
as many times as necessary. If there are still
some programmes remaining, go on to step
6
.
F
Return to the timer mode.
Press
#
(
TIMER
).
NOTE:
You can also check the programmes on the front display panel
even if the recorder’s power is off (unless the recorder is in the
Power Save mode
pg. 50) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.
Press
"
.
Press
"
again to check
more information. Each time
you press
"
, the next
programme’s information
appears.
HRS7700EU2.fm Page 32 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
33
Filename [HRS7700EU2.fm]
Page 33 March 8, 2000 1:33 pm
When programmes overlap each other
If “PROGRAM OVERLAPPED” appears, you have another
programme overlapping the programme you have just made.
The Programme Check screen appears and conflicting
programmes will start blinking.
Example: Programme 1 (you have just made) and
Programme 4 overlap each other.
A
Confirm the overlapping programmes.
Overlapping programmes blink on the TV screen.
B
Select the programme to modify.
Press
rt
, then press
OK
or
e
.
You can only select one of the overlapping programmes.
NOTE:
If you do not mind this overlap, press
PROG
to finish the timer
programme setting. The programme with the lower programme
number will be recorded and the other one will not be recorded
correctly. If no changes are made for approximately 1 minute,
the recorder will return to the normal screen.
C
Cancel or change programme setting.
To cancel a programme,
press
&
when the Programme
screen you do not want is shown. “PROGRAM
COMPLETED” appears on the TV screen for about 5
seconds, then the normal screen appears.
To change a programme,
press the appropriate button:
START+/–
,
STOP+/–
,
DATE+/
,
PR+/–
,
VPS/PDC
and/or
SP/LP
(
p
) when the Programme screen on which you
want to make changes is shown, then press
OK
.
“PROGRAM COMPLETED” appears on the TV screen for
about 5 seconds, then the normal screen appears.
NOTE:
If the overlap is not yet solved, or another overlap occurs with
the timer programme setting after making the last correction on a
programme, the conflicting programmes will be shown on the
Programme Check screen again. Repeat the above steps again
until the overlap is solved.
HRS7700EU2.fm Page 33 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right
EN
35
Filename [HRS7700EU2.fm]
Page 35 March 8, 2000 1:33 pm
EDITING
Edit From A
Camcorder
You can use a camcorder as the source player and your
recorder as the recording deck.
A
Make connections.
A
If the camcorder has no S-VIDEO output connector ...
... connect the camcorders AUDIO OUT and VIDEO
OUT connectors to the recorder’s front panel AUDIO
and VIDEO input connectors.
B
If the camcorder has an S-VIDEO output connector ...
... connect the camcorder’s AUDIO OUT and
S-VIDEO OUT connectors to the recorder’s front panel
AUDIO and S-VIDEO input connectors.
When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
When a Master Edit Control-equipped JVC camcorder is used,
the camcorder is capable of controlling the recorder. Refer to
the camcorder’s instruction manual for operating procedure.
B
Set the recorder’s input mode.
Press
AUX
(
NUMBER
key “
0
”) and/or
PR
to select “F-1”
for the AUDIO and VIDEO input connectors, or “S-1” for
the AUDIO and S-VIDEO input connectors, depending
on the connectors being used.
C
Set the edit mode.
See “PICTURE CONTROL” on page 49.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
All necessary cables can be obtained from your dealer.
When you select “EDIT” to dub tapes in step
3
, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
A
If the camcorder has no S-VIDEO output connector ...
B
If the camcorder has an S-VIDEO output connector ...
Your recorder
Audio cable (not provided)
VIDEO OUT
AUDIO OUT
Camcorder
VIDEO
input
Player
AUDIO input
EDIT
Video cable (not provided)
Mini-plug cable
(not provided)
(JVC camcorder
only)
To rear panel
PAUSE connector
Your recorder
Audio cable (not provided)
S-VIDEO OUT
AUDIO OUT
Camcorder
S-VIDEO
input
Player
AUDIO input
EDIT
S-Video cable (not provided)
Mini-plug cable
(not provided)
(JVC camcorder
only)
To rear panel
PAUSE connector
HRS7700EU2.fm Page 35 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU2.fm]
Masterpage:Left
36
EN
Page 36 March 8, 2000 1:33 pm
EDITING (cont.)
Output/Input Set
L-1 OUTPUT and L-1 INPUT Setting
The AV1 (L-1) IN/OUT connector accepts and delivers either a
composite signal (regular video signal) or a Y/C signal (a signal
in which the luminance and chrominance signals are separated).
Set “L-1 OUTPUT” and “L-1 INPUT” to the appropriate mode
depending on the type of appliance connected to the recorder’s
AV1 (L-1) IN/OUT connector.
A
Access the Main Menu screen.
Press
MENU
.
B
Access the Output/Input Set screen.
C
Select the output or input mode for the AV1
(L-1) IN/OUT connector.
D
Return to the normal screen.
Press
MENU
.
NOTES:
If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set
“L-1 INPUT” to “S-VIDEO”.
If “L-2 SELECT” is set to “DECODER”, it is impossible to set
“L-1 INPUT” to “S-VIDEO”.
Press
rt
to move the
highlight bar (pointer) to
“OUTPUT/INPUT SET”, then
press
OK
or
e
.
Press
rt
to move the
highlight bar (pointer) to “L-1
OUTPUT” or “L-1 INPUT”.
Then, press
OK
or
e
to select
the appropriate setting.
* The default setting is
bold
in
the table below.
8
L-1 OUTPUT
VIDEO
: If a connected appliance’s input is
compatible only with regular video
signals, set to “VIDEO”.
S-VIDEO:
If a connected appliance’s input is
compatible with Y/C signals, set to
“S-VIDEO”. You can obtain high-
quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)
8
L-1 INPUT
VIDEO
: If a connected appliance’s output is
compatible only with regular video
signals, set to “VIDEO”.
S-VIDEO
: If a connected appliance’s output is
compatible with Y/C signals, set to
“S-VIDEO”. You can obtain high-
quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)
HRS7700EU2.fm Page 36 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
37
Filename [HRS7700EU2.fm]
Page 37 March 8, 2000 1:33 pm
L-2 SELECT and L-2 INPUT Setting
The AV2 (L-2) IN/DECODER connector accepts either a
composite signal (regular video signal) or a Y/C signal (a signal
in which the luminance and chrominance signals are separated).
Set “L-2 SELECT” to the appropriate mode depending on the
type of appliance connected to the recorder’s AV2 (L-2) IN/
DECODER connector. Set “L-2 INPUT” to the appropriate mode
depending on the output signals of the connected appliance.
A
Select the input mode for the AV2 (L-2) IN/
DECODER connector.
B
Return to the normal screen.
Press
MENU
.
NOTES:
If you have a satellite receiver or a decoder connected to the
AV2 (L-2) IN/DECODER connector, be sure to set “L-2
SELECT” back to appropriate mode after editing.
If you are not connecting a satellite receiver or a decoder to
the AV2 (L-2) IN/DECODER connector, leave “L-2 SELECT” set
to “A/V”.
The default setting is “A/V”; if the recorder’s memory backup
has expired due to a power cut or because the AC was
removed from the recorder, “A/V” will be automatically
selected when the power is restored to the recorder. If you are
using a satellite receiver or a decoder, be sure to set “L-2
SELECT” back to appropriate mode.
When “L-2 SELECT” is set to “SAT”, “SAT” appears on TV
screen or front display panel instead of “L-2” or “L2”.
If “L-2 SELECT” is set to “DECODER”, it is impossible to set
“L-2 INPUT” to “S-VIDEO”.
If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set
“L-2 SELECT” to “DECODER”.
Perform steps
1
and
2
of “L-1 OUTPUT and L-1 INPUT
Setting” on page 36.
Press
rt
to move the
highlight bar (pointer) to “L-2
SELECT
” or “L-2 INPUT”.
Then, press
OK
or
e
to select
the appropriate setting.
* The default setting is
bold
in
the table below.
8
L-2 SELECT
A/V
: To use this recorder as the recording
deck with the player connected to
the AV2 (L-2) IN/DECODER
connector, or to use the satellite
receiver connected to the AV2 (L-2)
IN/DECODER connector.
DECODER
: To use a decoder connected to the
AV2 (L-2) IN/DECODER connector.
SAT
: To view a satellite programme with
the TV set while the recorder is
turned off. (
pg. 44)
8
L-2 INPUT
VIDEO
: If a connected appliance’s output is
compatible only with regular video
signals, set to “VIDEO”.
S-VIDEO
: If a connected appliance’s output is
compatible with Y/C signals, set to
“S-VIDEO”. You can obtain high-
quality S-VHS picture. (For
connection, be sure to use a 21-pin
SCART cable that is compatible with
the Y/C signal.)
HRS7700EU2.fm Page 37 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU2.fm]
Masterpage:Left
38
EN
Page 38 March 8, 2000 1:33 pm
EDITING (cont.)
Edit To Or From
Another Video
Recorder
You can use your recorder as the source player or as the
recording deck.
A
Make connections.
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on
page 39.
A
When using your recorder as the source player ...
... connect its AV1 (L-1) IN/OUT connector to the
recording deck.
B
When using your recorder as the recording deck ...
... connect its AV1 (L-1) IN/OUT or AV2 (L-2) IN/
DECODER connector to the source player.
C
If another recorder is compatible with the Y/C signal ...
... connect your recorder’s AV1 (L-1) IN/OUT
connector to another recorder.
With
C
connection ...
When using your recorder as the recording deck, set “L-1
INPUT” to “S-VIDEO” and “L-2 SELECT” to “A/V” (
pg. 36,
37).
When using your recorder as the source player, set “L-1
OUTPUT” to “S-VIDEO” (
pg. 36).
B
Set the input mode of recording deck.
With this video recorder, press
AUX
(
NUMBER
key “
0
”)
and/or
PR
to select “L-1” for the AV1 (L-1) IN/OUT
connector, or “L-2” for the AV2 (L-2) IN/DECODER
connector, depending on the connector being used.
When using another recorder as the recording deck, refer to its
instruction manual.
When using the AV2 (L-2) IN/DECODER connector, set “L-2
SELECT” to “A/V” (
pg. 37).
C
Set the edit mode.
See “PICTURE CONTROL” on page 49.
D
Start the source player.
Engage the Play mode of the source player.
E
Start the recording deck.
Engage the Record mode of the recording deck.
Advantages of S-VHS video recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
HRS7700EU2.fm Page 38 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-Full-NoTitle0
EN
39
Filename [HRS7700EU2.fm]
Page 39 March 8, 2000 1:33 pm
NOTES:
All necessary cables can be obtained from your dealer.
For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.
When you select “EDIT” to dub tapes in step
3
, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you
finish dubbing the tapes.
When you use this recorder as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting (
pg. 49).
If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this
recorder’s S-VIDEO and AUDIO input/output connectors.
When using your recorder as the source player ...
... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck’s S-Video and Audio input connectors.
When using your recorder as the recording deck ...
... connect its front panel S-VIDEO and AUDIO input connectors to the source player’s S-Video and Audio output connectors. Then,
set the recorder’s input mode to “S-1”.
Video
channel or
AV mode
21-pin SCART cable
(not provided)
Recorder Your recorder
Another recorder
Player
TV receiver
RF cable
(provided)
AB
Video
channel or
AV mode
21-pin SCART cable
(not provided)
Recorder
Your recorder
Another recorder
Player
TV receiver
RF cable
(provided)
C
21-pin SCART cable
(not provided)
Recorder
Your recorder
Another recorder
Player
TV receiver
S-Video cable
(not provided)
HRS7700EU2.fm Page 39 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU2.fm]
Masterpage:Left
40
EN
Page 40 March 8, 2000 1:33 pm
EDITING (cont.)
Audio Dubbing
Audio Dubbing replaces the normal audio sound of a
previously recorded tape with a new soundtrack.
Normal audio track
Video/Hi-Fi audio
track
Pre-recorded tape
Audio-dubbed tape
CD player, etc.
Your recorder
CD player, etc.
Mixer
output
Audio mixer
Original sound
AUDIO OUT
Your recorder
HRS7700EU2.fm Page 40 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
41
Filename [HRS7700EU2.fm]
Page 41 March 9, 2000 3:45 pm
A
Make connections.
Connect an audio component to the AUDIO L + R input
connectors on the recorder’s front panel.
When connecting a monaural audio component, use only the
recorder’s AUDIO L input connector.
B
Set the recorder’s input mode.
Press
AUX
(
NUMBER
key “
0
”) and/or
PR
to select “F-1”
or “S-1”.
C
Locate the start point.
Press
4
to start playback of the tape in your recorder, and
press
9
when you reach the point where you want to start
dubbing.
D
Engage the Audio Dubbing mode.
Press
A.DUB
.
Your recorder enters the Audio Dubbing Pause mode. (“
o
blinks, “
u” and “i” light up on the front display panel.)
To perform Audio Dubbing with audio mixing, press
AUDIO
on the remote control to select “
a + s (L+R)” at this point.
* Audio Dubbing with audio mixing is not possible if you are using a
monaural audio component, or if you don’t have an audio mixer.
E
Start dubbing.
Engage the audio component’s Play mode, then press
4
to start the tape in your recorder; Audio Dubbing begins
at this point.
o” blinks and “u” is displayed on the front display panel.
To stop dubbing temporarily, press
9. Press 4 to resume
dubbing.
F
End Audio Dubbing.
Press
8
(or
0
) to stop the tape in your recorder, and
engage the audio component’s Stop mode.
NOTES:
When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the mixed sound (Hi-Fi + Normal soundtracks), press
AUDIO
on the remote control to select “
a
+
s
(L+R) +
NORM” (
pg. 22).
Audio Dubbing stops automatically when the counter reaches
“0:00:00”, and the recorder enters the Play mode. Check the
counter reading before dubbing.
Audio Dubbing is also possible using the rear panel AV1 (L-1)
IN/OUT or AV2 (L-2) IN/DECODER connector. When using
these 21-pin SCART connectors, be sure to select the correct
input mode (“L-1” or “L-2”) in step
2
.
Audio Dubbing is not possible with cassettes whose record
safety tab has been removed.
When playing back an audio-dubbed tape, press
AUDIO
on
the remote control to select the soundtrack you wish to hear
(
pg. 22).
HRS7700EU2.fm Page 41 Thursday, March 9, 2000 3:45 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU2.fm]
Masterpage:Left
42
EN
Page 42 March 8, 2000 1:33 pm
EDITING (cont.)
Insert Editing
Insert Editing replaces part of the recorded scene with
new material. Both the picture and Hi-Fi audio
soundtrack are replaced with new ones, while the
normal audio soundtrack remains unchanged. If you
wish to change the normal audio track as well, use the
Audio Dubbing function simultaneously.
For Insert Editing, use your recorder as the recording
deck.
Source tape
Recording tape
Before Insert Editing
Normal audio
track
After Insert Editing
Video/Hi-Fi
audio track
Another recorder
Audio/Video signalS-Video signal
Recorder
Your recorder
Player
HRS7700EU2.fm Page 42 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
43
Filename [HRS7700EU2.fm]
Page 43 March 9, 2000 3:46 pm
A
Make connections.
Connect the player’s VIDEO OUT or S-VIDEO OUT and
AUDIO OUT connectors to your recorder’s VIDEO or
S-VIDEO and AUDIO input connectors on the front
panel.
B
Set the recorder’s input mode.
Press
AUX
(
NUMBER
key “
0
”) and/or
PR
to select “F-1”
for the AUDIO and VIDEO input connectors or “S-1” for
AUDIO and S-VIDEO input connectors.
C
Locate the end point.
Load the recording cassette into your recorder, and play it
back to determine the edit-out point (the end of the
segment to be replaced) using the
SHUTTLE
ring or the
JOG
dial, or pressing
w
e
and
9
.
D
Reset the counter.
Press
0000
.
The counter is reset to “0:00:00”.
E
Locate the start point.
Determine the edit-in point (the beginning of the segment
to be replaced) using the
SHUTTLE
ring or the
JOG
dial,
or pressing
w
e
and
9
.
Be sure to engage the Still mode at the edit-in point.
F
Engage the Insert Editing mode.
Press
INSERT
.
Your recorder enters the Insert Pause mode. (“
o”, “u” and
i” light up on the front display panel.)
The TV screen changes from the still picture to the input
source you are going to record.
G
Start Editing.
Load the source cassette and play back the segment that
is to be inserted. When you reach the start of the section
of the source tape that you wish to insert, press
4
to start
the tape in your recorder; Insert Editing begins at this
point.
o” and “u” are displayed on the front display panel.
H
End Insert Editing.
At counter “0:00:00”, Insert Editing will stop
automatically while the tape continues running in the
Play mode. If you wish to stop Insert Editing before the
specified edit-out point, press
0000
.
AV Insert Editing
If you want to replace the picture, Hi-Fi audio soundtrack
and normal audio soundtrack all at the same time ...
... In step
6
, after you press
INSERT
, press
A.DUB
also.
(“
o
” and “
u
” blink and “
i
” lights up on the front display
panel.)
NOTES:
All necessary cables can be obtained from your dealer.
Insert Editing is not possible with cassettes whose record safety
tab has been removed.
When Insert Editing is performed on a tape that has been
recorded on another video recorder, the inserted portion may
appear distorted.
In Insert Editing, the recording speed (SP/LP) is determined by
the previous recording to be replaced. If the previous
recording’s speed changes within a single edit, the inserted
picture will be distorted at the switching point.
A small portion of the recording which precedes an insert edit
may become erased.
Insert Editing is also possible using the rear panel AV1 (L-1) IN/
OUT or AV2 (L-2) IN/DECODER connector. When using these
21-pin SCART connectors, be sure to select the correct input
mode (“L-1” or “L-2”) in step 2.
HRS7700EU2.fm Page 43 Thursday, March 9, 2000 3:46 PM
Downloaded from www.Manualslib.com manuals search engine
Filename [HRS7700EU2.fm]
Masterpage:Left
44
EN
Page 44 March 8, 2000 1:33 pm
SYSTEM CONNECTIONS
Connecting To A Satellite Receiver
Simple Connections
This is an example of simple connection if your TV has
one 21-pin AV input (SCART) connector.
Connect the satellite receiver to the AV2 (L-2) IN/
DECODER connector, then connect the AV1 (L-1) IN/
OUT connector to the TV’s connector.
NOTES:
Set “L-2 SELECT” to “A/V” (
pg. 37).
You can use Automatic Satellite Programme Recording
function (
pg. 34) with this connection.
To record a programme via the satellite receiver, select L-2
mode by pressing
AUX
(
NUMBER
key “
0
”) and/or
PR
so that
“L-2” appears on the front display panel.
For details, refer to the instruction manual of the satellite
receiver.
IMPORTANT
When you set “L-2 SELECT” to “SAT” (
pg. 37), it is possible to view a satellite broadcast with the TV set to its AV mode even if
the recorder is turned off. When the recorder is in Stop mode or recording, press
TV/VCR
on the remote control to turn off the VCR
indicator on the front display panel.
If you turn on the recorder when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the
satellite receiver, or set the TV to its TV mode, or press
TV/VCR
on the remote control to set the recorder to the video mode.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
21-pin SCART connector
Back of TV
ANT. IN
RF OUT
Aerial
connector
Mains outlet
Back of recorder
HRS7700EU2.fm Page 44 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
Masterpage:Right-NoTitle0
EN
45
Filename [HRS7700EU2.fm]
Page 45 March 8, 2000 1:33 pm
Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector
if you have a decoder, AV1 (L-1) IN/OUT connector to
TV’s connector, and AV2 (L-2) IN/DECODER connector
to the satellite receiver’s connector. Then connect the
satellite receiver and TV.
NOTES:
Set “L-2 SELECT” to “A/V” (
pg. 37).
You can use Automatic Satellite Programme Recording
function (
pg. 34) with this connection.
To record a programme via the satellite receiver, select L-2
mode by pressing
AUX
(
NUMBER
key “
0
”) and/or
PR
so that
“L-2” appears on the front display panel.
To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
For details, refer to the instruction manual of the satellite
receiver and decoder.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
21-pin SCART
connector
Back of TV
ANT. IN
RF OUT
Aerial
connector
Decoder
Mains outlet
Back of recorder
HRS7700EU2.fm Page 45 Wednesday, March 8, 2000 1:33 PM
Downloaded from www.Manualslib.com manuals search engine
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC HR-S7722EU bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC HR-S7722EU in de taal/talen: Engels als bijlage per email.

De handleiding is 3,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info