Handleiding JVC HR-S5902 (pagina 19 van 24) (Engels)

658620

Verklein

Vergroot

Pagina terug

1/24

Pagina verder

— 19 —

Page 19 October 31, 2002 9:59 am

Audio Dubbing

Audio Dubbing replaces the normal audio sound of a previously

recorded tape with a new soundtrack.

Make connections

Connect an audio cable between the VCR’s audio input

connectors and the audio component’s audio output connectors.

● When connecting a monaural audio component, use only the

VCR’s AUDIO L input connector.

● Audio Dubbing is possible by using the audio input connectors

on the front panel or on the rear panel.

Select input mode

Select “F-1” —when connecting the audio component to the

audio input connectors on the front panel.

Select “L-1” —when connecting the audio component to the

audio input connectors on the rear panel.

Press AUX or CH+/– on the Remote. Or push the JOG dial, then

turn it to the left or right.

Locate start point, and engage Audio Dubbing mode

Load a cassette and press PLAY (4) on the VCR. Press PAUSE (9)

at the point where you want to start dubbing, then press A.DUB.

● The VCR enters the Audio Dubbing Pause mode. “

䡬

” blinks

and “$” lights on the display panel.

Start dubbing

Engage the Play mode of the audio component, then press PLAY

(4) on the VCR. Audio Dubbing begins at this point.

● To pause dubbing, press PAUSE (9). Press PLAY (4) to resume

dubbing.

End Audio Dubbing

Press STOP (8) on the Remote or STOP/EJECT (0) on the VCR,

then engage the Stop mode of the audio component.

NOTES:

● When monitoring the sound during Audio Dubbing, the normal

soundtrack is automatically selected. If you wish to hear the

Hi-Fi or mixed sound (Hi-Fi + normal soundtracks), press

A.MONITOR to select “NORM HI-FI”. (

墌

pg. 9, “Selecting

monitor sound”)

● Audio Dubbing stops automatically when the counter reaches

“0:00:00”, and the VCR enters the Play mode. Check the

counter reading on the screen before dubbing.

● Audio Dubbing is not possible with a cassette whose record

safety tab has been removed.

● When playing back an audio-dubbed tape, press A.MONITOR

to select the soundtrack you wish to hear. (

墌

pg. 9, “Selecting

monitor sound”)

Insert Editing and AV Dubbing

Insert Editing:

You can replace a recorded scene with new scene recorded on

another tape or with other material. Both the picture and the

sound recorded on the Hi-Fi sound track are replaced at the same

time.

AV Dubbing:

You can perform Audio Dubbing and Insert Editing at the same

time. This means that the picture and the sounds recorded on the

Hi-Fi sound track and on the normal track are replaced at the

same time.

● For AV Dubbing, you can edit pictures and sound using different

sources; connect a video source to the video input connector,

and an audio source to the audio input connectors.

Make connections

Connect an audio/video cable between the VCR’s audio/video

input connectors and the other component’s audio/video output

connectors.

● Insert Editing and AV Dubbing are possible by using the audio/

video input connectors on the front panel or on the rear panel.

Select input mode

Select “F-1” —when connecting the other component to the

audio/video input connectors on the front panel.

Select “L-1” —when connecting the other component to the

audio/video input connectors on the rear panel.

Press AUX or CH+/– on the Remote. Or push the JOG dial, then

turn it to the left or right.

Various connection for editing tapes

The following three methods can be used for editing tapes.

● VHS to S-VHS editing (VIDEO-VIDEO connection):

Although the picture quality is inherently limited by the

original VHS quality, the edited tape has better picture quality

than those made by VHS-to-VHS editing.

● S-VHS to VHS editing (VIDEO-VIDEO connection):

Since the original source is recorded in S-VHS mode, the

edited tape has better picture quality than those made by

VHS-to-VHS editing.

● S-VHS to S-VHS (S-VIDEO connection):

Original picture quality of S-VHS made can be duplicated

with minimal picture degradation. This is the best editing

method you can use on S-VHS VCRs.

To AUDIO input

This VCR

CD player, etc.

To AUDIO output

To S-video output

This VCR (for recording)

Another VCR (for playback)

S-video cable

(supplied)

To S-VIDEO IN

To audio/video output

Audio/video cable

(not supplied)

To AUDIO/VIDEO IN

CONTINUED ON NEXT PAGE

HR-S5902U-EN.fm Page 19 Thursday, October 31, 2002 10:00 AM

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

JVC HR-S5902 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info