532511
41
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
31
Troubleshooting
Symptom Check Points Action
Video
troubles
Colors in the monitor screen are
abnormal. (During genlocking)
Is the SC phase adjusted properly?
A P12
Synchronization is not possible. Are the Tri-level sync signal or BB signals applied to the
[GENLOCK INPUT] connectors?
Is the VTR playback signal supplied directly without passing
through a TBC?
A
P12
Control
troubles
Pressing the corresponding
button cannot start the operation.
A
<EXT>
B
is displayed on the LCD.
Functions that are not available on the camera cannot be
controlled.
hCheck the camera functions again.
^
The LCD display keeps on
displaying
A
NOW INITIALIZING
JUST A MOMENTB.
Are cables connected properly?
Is the power switch of the camera set to ON?
A P8
A P9
A P10
The LCD display keeps on
display
A
PLEASE CHECK THE
CAMERAB.
Are cables connected properly?
Is the power switch of the camera set to ON?
(When power of camera is turned off while RM-HP790DU/RM-
HP790DE is on, APLEASE CHECK THE CAMERAB will be
displayed after about 20 seconds if RM-HP790DU/RM-HP790DE
is operated. In addition, when turning on RM-HP790DU/RM-
HP790DE while the power switch of camera is off, similar display
will appear after about 30 seconds. )
A
P8
A P9
A P10
LCD display shows
A
---B. The connected camera does not have the assigned function.
Check the camera functions again and assign the proper functions
to the [F1] to [F4] buttons.
A P25
white balance adjustment cannot
be started.
Is the [W. BAL] switch set to AAB or ABB?
Is FAS or FAW ON (which is indicated by the lighting of the
[AUTO] light)?
A P18
The white balance adjustment will
not complete.
Are the color temperature filters and lighting conditions
appropriate?
Does the object have colors?
A P18
The tally lamp does not light. Is the tally system of the RM-HP790DU/RM-HP790DE compatible
with that of the camera system?
The RM-HP790DU/RM-HP790DE has been set to the voltage
supply at the factory.
If it is required to use the [TALLY] input in the contact supply mode,
the setting of the internal circuitry should be changed ; consult the
nearest JVC-authorized service agent.
A P14
Incorrect operation even when
FAS button is ON.
Is the Studio cable of KA-M790G pulled out or loose?
hConnect the cable properly.
^
A
E.02B will be displayed on RM-
LP25U
Are cables connected properly?
Is the power switch of the camera set to ON?
(When power of camera is turned off while RM-HP790DU/RM-
HP790DE/RM-LP25U is on, similar display will appear after about
10 seconds.)
A
P8
A P9
A P10
[OPERATE] button of RM-LP25U
keeps blinking.
Are cables connected properly?
Is the power switch of the camera set to ON?
(When turning on RM-HP790DU/RM-HP790DE/RM-LP25U while
the power switch of camera is off, the [OPERATE] button will keep
blinking.)
A P8
A P9
A P10
41

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC GY-HM790 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC GY-HM790 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info