532511
38
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
28
General
To prevent operational errors, the LCD display shows one of the following warning messages when an erroneous operation is
performed.
When the LCD display shows one of the following error messages during an auto white balance adjustment and Auto Set mode,
check ACauseB and ACheck PointB below and then retry the auto white balance adjustment. (The error message is displayed for
about 5 seconds.)
Warning Messages
Displayed Message Cause Check Point
INVALID ENTRY
GAIN : LOLUX
The gain is set to the Lolux mode. Exit from the Lolux mode, and then adjust the gain again.
INVALID ENTRY
FULL AUTO : ON
The [FULL AUTO] button is ON. Press the [FULL AUTO] button so that the lamp in it turns off, then retry
operation.
INVALID ENTRY
GAIN : ALC + EEI
[ALC + EEI] is AONB. Exit from the [ALC + EEI] mode, and then retry operation.
INVALID ENTRY
GAIN : ALC
[ALC] is AONB. Exit from the [ALC] mode, and then retry operation.
INVALID ENTRY
W.BAL : FAW
The white balance is set to the FAW
mode.
Cancel FAW and start the white balance adjustment.
INVALID ENTRY
W.BAL : PRESET
The [W. BAL] button is set to
APRESETB.
Auto white balance adjustment cannot be started in this mode.
INVALID ENTRY
W.BAL : MANUAL
The white balance adjustment is set to
manual mode by the [WHITE-AUTO]
button.
Auto white balance adjustment cannot be started in this mode.
INVALID ENTRY
BARS : ON
The [BARS] button is pressed. Press the [BARS] button so that the lamp in it turns off, then retry
operation.
Error Messages
Displayed Message Cause Check Point
AUTO WHITE A (B)
ERROR: LOW LIGHT
The light intensity is insufficient. Increase the lighting (illumination) or boost the gain with the [GAIN]
button.
(Note that the sensitivity deteriorates when the gain is boosted.)
AUTO WHITE A (B)
NG: OBJECT
The object is not suitable for shooting. Check if the object is white and change the object if required.
AUTO WHITE A (B)
ERROR: OVER LIGHT
The amount of incident light is too
high.
Check if a strong light source, such as the sun, is shining into the
camera either directly or as a result of a reflection caused by the
object.
The color temperature conversion filter
is not set properly.
Set the color temperature conversion filter to the correct position.
AUTO BLACK LENS NOT
CLOSED?
The lens will not close for auto black-
balance adjustment.
Set the camera so that the lens can be closed.
AUTO BLACK ERROR!
Auto black adjustment is not working
properly.
Check the setups of the RM-HP790DU/RM-HP790DE and camera
again.
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC GY-HM790 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC GY-HM790 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info