119
Memo :
If you do not want to save the file, select [Cancel] or press
the [CANCEL] button to return to the previous screen.
When saving of a file fails, a AStore Error!B message
(indicated in red frame) appears for several seconds, after
which the previous screen is displayed.
8 Saving is complete.
After saving of the file is complete, ACompleteB appears on
the screen, and the menu screen closes automatically.
Loading a Setup File
1 Display the [Setup File Manage] menu.
Select the [Setup File Manage] menu on the [Main Menu]
screen, and press the Set button (
R). (A Page 95)
2 Select [Load File] and press the Set button (R).
3 Select [Scene File] or [Picture File], and press the Set
button (
R).
The existing files are displayed.
4 Select the file to load using the cross-shaped button
(
JK), and press the Set button (R).
Memo :
When the write-protect switch of the inserted SDHC card
is set, a mark appears beside the SDHC card icon.
Setup files can be loaded from an SDHC card even if the
write-protect switch is set.
A mark is displayed at the right end when there are
some settings that are not supported by the setup file
(e.g., picture files saved using the GY-HM700 series).
These files can be loaded by this camera recorder, but
some of the settings will not be compatible. (A Page 117)
Setup files that are completely incompatible will not be
displayed. (A Page 117)
5 Select [Load] on the confirmation screen, and press
the Set button (
R).
Loading starts, and ALoading...B appears on the screen.
Memo :
If you do not want to load the file, select [Cancel] or press
the [CANCEL] button to return to the previous screen.
When loading of a file fails, a ALoad Error!B message
(indicated in red frame) appears for several seconds, after
which the previous screen is displayed.
6 Loading is complete.
After loading of the file is complete, ACompleteB appears on
the screen, and the menu screen closes automatically.
Resetting Setup Files
1 Display the [Setup File Manage] menu.
Select the [Setup File Manage] menu on the [Main Menu]
screen, and press the Set button (
R). (A Page 95)
2 Select [Reset File] and press the Set button (R).
3 Select [Scene File] or [Picture File], and press the Set
button (
R).
The existing files are displayed.
4 Select the file to delete using the cross-shaped button
(
JK), and press the Set button (R).
Memo :
Scene files and preset scene files stored inside the SDHC
card cannot be selected or reset.
5 Select [Reset] on the confirmation screen, and press
the Set button (
R).
Deletion starts, and AResetting...B appears on the screen.
Memo :
If you do not want to reset the file, select [Cancel] or press
the [CANCEL] button to return to the previous screen.
6 Resetting is complete.
After resetting of the file is complete, ACompleteB appears on
the screen, and the menu screen closes automatically.
7
[Load File] Menu Screen
Cursor
5
