70
11. MENU SCREENS
MASTER
BLACK
DETAIL
DTL. V/H
BALANCE
SKIN DTL
DETECT
SCAN
WHITE CLIP
KNEE
POINT
ADVANCED
PROCESS
PAGE BACK
NORMAL
NORMAL
NORMAL
OFF
VIDEO
108%
100%
–––––
11-6 CAMERA PROCESS MENU Screen
Item Function Variation Range Initial Setting
Adjusts the pedestal level (master black), which is the reference of black.
● To increase the pedestal level ..... Increase the number. (UP)
● To decrease the pedestal level .... Decrease the number. (DOWN)
Adjusts the detail enhancement level.
● To sharpen details ....................... Increase the number. (UP)
● To soften details .......................... Decrease the number. (DOWN)
Sets the direction, horizontal (H) or vertical (V), in which stronger detail
enhancement is applied.
To strengthen the H enhancement......Increase the number (UP).
To strengthen the V enhancement ...... Decrease the number (DOWN).
Sets the Skin Detail function to ON or OFF.
ON :Skin Detail function activated.
OFF :Skin Detail function not activated.
☞ See “Using the Skin Detail Function” on page 86.
Increases the vertical resolution.
● VIDEO :Vertical resolution 380 lines.
● FRAME MODE :Vertical resolution 450 lines
Sets the point where white clipping is to take place for an input video
signal with a high luminance level.
108% :The luminance level is white-clipped at the point of 108%.
100% :The luminance level is white-clipped at the point of 100%. If the
screen appears too white even with the point set at 108%, set the
point at 100%.
Sets the knee point (brightness level) when the AUTO KNEE function is
set to OFF.
Displays the ADVANCED PROCESS Screen.
☞ See “ADVANCED PROCESS Screen” on page 71.
The TOP MENU returns when the SHUTTER dial is pressed with the
cursor at this position.
MAX (10)
9
to
NORMAL (0)
to
–9
MIN (–10)
MAX (10)
9
to
NORMAL (0)
to
–9
MIN (–10)
H-MAX (5)
4
to
NORMAL (0)
to
–4
H-MIN (–5)
ON
OFF
VIDEO
FRAME MODE
108%
100%
100%
96%
92%
88%
84%
80%
–––––
The CAMERA PROCESS menu screen is only displayed in the Camera mode.
Note:
In the FRAME MODE the bright sections may be coloured depending
on the colour temperature of the subject.
Note:
When LOLUX is ON, “FIX” is displayed and setting is not possible.
Note:
When LOLUX is ON, “FIX” is displayed and setting is not possible.
71
11. MENU SCREENS
Item Function Variation Range Initial Setting
CINE MODE
COLOR
MATRIX
GAMMA
FLARE <R>
FLARE <B>
SKIN COLOR
ADJUST
PAGE BACK
OFF
ON
OFF
STD
WARM
EXTRA1
EXTRA2
EXTRA3
MAX (2)
1
to
NORMAL (0)
to
–7
MIN (–8)
OFF
MAX
+9
to
NORMAL
to
–9
MIN
–––––
–––––
OFF
STD
NORMAL
NORMAL
–––––
–––––
Item Function Variation Range Initial Setting
SKIN COLOR
DET.
SKIN COLOR
RANGE
PAGE BACK
Sets whether it is possible to change the color used by the Skin Tone
Detail function.
EXECUTE:Choose this setting to allow detection of the color used by the
Skin Tone Detail function.
STOP :Choose this setting to stop detection of the color used by the
Skin Tone Detail function.
☞ See “Using the Skin Tone Detail Function” on page 86.
The setting of this item can only be changed when the SKIN COLOR DET.
item is set to EXECUTE.
This setting is for adjusting the skin color range where Skin Tone Detail
functions. (When this item is selected, the area where the Skin Tone Detail
function is applicable is indicated by zebra patterns on the screen.)
While viewing the zebra pattern range, perform the adjustment.
Increasing the range ........ Increase the number
Increasing the range ........ Decrease the number
The ADVANCED PROCESS menu screen returns when the SHUTTER
dial is pressed with the cursor at this position.
STOP
EXECUTE
WIDE
+11
to
NORMAL
to
–11
NARROW
–––––
STOP
NORMAL
–––––
11-8 SKIN COLOR ADJUST Screen
11-7 ADVANCED PROCESS Screen
When set to ON, produces gamma curve close to the picture characteristics
of movies.
Used to set the color matrix. When set to ON, color reproduction becomes
good. However, noise will increase.
5 types of color matrix functions are provided.
OFF : The function is OFF
STD : Standard colour matrix
WARM : Colour adjustment with red tinge
EXTRA 1 to 3 : To set a color matrix other that those described above.
Select the desired option.
Compensates for the gamma curve that determines the reproducibility of
black color.
● To enhance the black color reproducibility. However, halftones will be
lost for white section
............... Increase the number
● When reproducibility of the black color is not so important
............... Decrease the number
For correcting the black level of Rch when the flare phenomenon in which
light entering the lens is diffused and results in reflection that colors the
black portions of the image occurs.
To weaken tinge of red ... Increase the number
To strengthen tinge of red ... Decrease the number
For correcting the black level of Bch when the flare phenomenon in which
light entering the lens is diffused and results in reflection that colors the
black portions of the image occurs.
To weaken tinge of blue ... Increase the number
To strengthen tinge of blue ... Decrease the number
Pressing the SHUTTER dial once when the cursor is at this position
switches the screen to display the SKIN COLOR ADJUST screen.
The CAMERA PROCESS menu screen returns when the SHUTTER dial
is pressed with the cursor at this position.
Note:
When CINE MODE is ON, “FIX” is displayed and setting is not possible.
Note:
When CINE MODE is ON, “FIX” is displayed and setting is not possible.
Note:
When LOLUX is ON, “FIX” is displayed and setting is not possible.
Note:
When LOLUX is ON, “FIX” is displayed and setting is not possible.
