39778

JVC GR-DVX9 Handleiding

1
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
LYT0629-001B
EN
DIGITAL VIDEO CAMERA
INSTRUCTIONS
GR-DVX10
GR-DVX9
ENGLISH
CONTENTS
AUTOMATIC DEMONSTRATION
5
GETTING STARTED
6 – 15
RECORDING
16 – 39
Basic Recording For Video........................ 16
Basic Recording For Digital Still Camera (D.S.C.)
.. 19
Basic Recording For Video And D.S.C. .......... 20
Advanced Features For Video And D.S.C. ...... 22
PLAYBACK
40 – 55
Basic Playback For Video......................... 4 0
Advanced Features For Video ................... 41
Basic Playback For D.S.C. ........................ 45
Advanced Features For D.S.C. ................... 48
CONNECTIONS
56 – 59
Basic Connections .................................. 56
Advanced Connections ............................ 58
DUBBING
60 – 65
Dubbing To A VCR ................................. 60
Dubbing From A VCR .............................. 61
Dubbing To A Video Unit
Equipped With A DV Connector ................ 62
Dubbing From A Video Unit
Equipped With A DV Connector ................ 63
Dubbing Images Stored In A
MultiMediaCard To A Tape ..................... 64
Dubbing Images Recorded
On A Tape To A MultiMediaCard .............. 6 5
USING THE REMOTE
CONTROL UNIT
66 – 77
Slow-Motion Playback, Frame-By-Frame
Playback and Playback Zoom .................. 68
Playback Special Effects .......................... 69
Random Assemble Editing ........................ 70
For More Accurate Editing ........................ 74
Audio Dubbing ...................................... 76
Audio Dubbing Using Digital Sound Effects .... 77
USER MAINTENANCE
78
TROUBLESHOOTING
79 – 84
INDEX
85 – 92
Docking Station .................................... 85
Controls, Connectors And Indicators ............ 86
Indications .......................................... 88
CAUTIONS
93 – 95
TERMS
96 – 97
SPECIFICATIONS
98 – 99
Please visit our Homepage on the World Wide
Web and answer our Consumer Survey
(in English only):
http://www.jvc-victor.co.jp/english/index-e.html
2 EN
This camcorder is designed to be used with PAL-type
colour television signals. It cannot be used for playback
with a television of a different standard. However, live
recording and LCD monitor/ viewfinder playback are
possible anywhere. Use the BN-V507U/V514U battery
packs and, to recharge them, the provided multi-voltage
AC Power Adapter/Charger. (An appropriate conversion
adapter may be necessary to accommodate different
designs of AC outlets in different countries.)
Using This Instruction Manual
• All major sections and subsections are listed in the Table Of Contents on the cover page.
• Notes appear after most subsections. Be sure to read these as well.
• Basic and advanced features/operation are separated for easier reference.
It is recommended that you . . .
..... refer to the Index (
pgs. 85 – 92) and familiarize yourself with button locations, etc. before use.
..... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe use of
this product.
SAFETY PRECAUTIONS
You are recommended to carefully read the cautions on pages 93 through 95 before use.
NOTES:
●
The rating plate (serial number plate) and safety
caution are on the bottom and/or the back of the
main unit.
●
The rating plate (serial number plate) of the AC Power
Adapter/Charger is on its bottom.
●
The rating plate (serial number plate) of the Docking
Station is on its bottom.
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
Dear Customer,
Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions
contained in the following pages to ensure safe use of this product.
When the equipment is installed in a cabinet or on a
shelf, make sure that it has sufficient space on all sides
to allow for ventilation (10 cm or more on both sides,
on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or
cloth etc. the heat may not be able to get out.)
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental problems
must be considered and the local rules or laws
governing the disposal of these batteries must be
followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or places with
water.
Also do not place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases,
potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment,
fire or electric shock may be caused.)
CAUTIONS:
To prevent shock, do not open the cabinet. No user
serviceable parts inside. Refer servicing to qualified
personnel.
When you are not using the AC Power Adapter/
Charger for a long period of time, it is recommended
that you disconnect the power cord from AC outlet.
Connection to the mains supply in the United Kingdom.
DO NOT cut off the mains plug from this equipment. If
the plug fitted is not suitable for the power points in
your home or the cable is too short to reach a power
point, then obtain an appropriate safety approved
extension lead or consult your dealer.
BE SURE to replace the fuse only with an identical
approved type, as originally fitted, and to replace the
fuse cover.
If nonetheless the mains plug is cut off be sure to
remove the fuse and dispose of the plug immediately, to
avoid possible shock hazard by inadvertent connection
to the mains supply.
If this product is not supplied fitted with a mains plug
then follow the instructions given below:
DO NOT make any connection to the Larger Terminal
coded E or Green.
The wires in the mains lead are coloured in accordance
with the following code:
Blue to N (Neutral) or Black
Brown to L (Live) or Red
If these colours do not correspond with the terminal
identifications of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured
black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt — consult a competent electrician.
IMPORTANT
(for owners in the U.K.)
EN3
Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the
malfunctioning of internal circuitry. There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical damage to the camcorder and to the user.
When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or holding the
camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction.
Take care not to get your finger caught in the cassette holder cover. Do not let children operate the camcorder, as
they are particularly susceptible to this type of injury.
Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder.
CAUTION!
Attaching the camcorder to the Docking Station with cables (Audio/Video, S-Video, Editing, DC, etc.) connected,
then leaving it on top of the TV is not recommended, as tripping on the cables will cause the camcorder to fall,
resulting in damage.
This camcorder is designed exclusively for the digital video cassette and MultiMediaCard. Only cassettes marked
“
” and memory cards marked “ ” can be used with this unit.
Before recording an important scene . . .
..... make sure you only use cassettes with the Mini DV mark .
..... make sure you only use memory cards with the mark
.
..... remember that this camcorder is not compatible with other digital video formats.
..... remember that this camcorder is intended for private consumer use only. Any commercial use without proper
permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you obtain permission beforehand.)
SOME DO’S AND DON’TS ON THE SAFE USE
OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards but, like any electrical
equipment, care must be taken if you are to obtain the best results and safety is to be assured.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and interconnections
between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions.
Switch off and withdraw the mains plug when making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in
any way — switch off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for
unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure
that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped
people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road
safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will
cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the
manufacturer’s approved stand or legs with the fixings provided according to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
— NEVER let anyone especially children push anything into holes, slots or any other opening in the case — this
could result in a fatal electrical shock;
— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!
4 EN
PROVIDED ACCESSORIES
•Core Filter x 2
(for optional S-Video cable
and Audio/Video (RCA plug
– RCA plug) cable)
• AC Power Adapter/Charger
AA-V51EG or AA-V51EK
• Remote Control Unit
RM-V716U
•DC Cord
•CD-ROM
The CD ROM contains the
following 11 software
programmes:
• MultiMediaNavigator
• JLIP Video Capture
• JLIP Video Producer
• Picture Navigator (for Windows
®
)
• Picture Navigator (for Macintosh
®
)
• CardNavigator
• Video Player
• JVC Video Decoder
Mr. Photo Gold
• Mr. Photo
• PhotoAlbum
• ProImage Plus
•AAA (R03) Battery x 2
(for remote control unit)
• PC Connection Cable
•Editing Cable
(One plug has 3 rings
around the pin, and
the other has 1 ring
around the pin.)
• Cleaning Cloth
•Battery Pack
BN-V507U
• MultiMediaCard (8 MB)
(Already inserted in the
camcorder)
• JLIP Cable (Both plugs have
3 rings around the pin.)
•Docking Station
CU-V502E
•Audio/Video Cable
(ø3.5 mini-plug to
RCA plug)
•Cable Adapter
EN5
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when
“DEMO. MODE” is set to “ON” (factory-preset).
Available when the POWER Switch is set to “ ” and no
cassette is in the camcorder.
Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for
more than 1 minute after that, the demonstration will resume.
“DEMO. MODE” remains “ON” even if the camcorder power
is turned off.
To cancel Automatic Demonstration, set the Operation Switch
to “ ” and set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch, then press the
MENU wheel twice while the demo is in progress. This takes
you directly to the demo mode’s Setting Menu (so you will not
have to go through the Menu Screen). Rotate the MENU wheel
to select “OFF” and press it. The normal screen appears.
1
R
S
Z
S
G
B
I
D
R
E
O
O
N
A
E
D
E
E
C
U
O
A
I
E
M
C
T
N
M
P
N
P
N
O
A
U
M
D
/
U
.
M
R
O
M
U
T
M
E
N
D
M
O
P
A
B
M
R
E
O
D
L
E
O
A
D
E
L
R
D
E
Y
E
ME
O
O
N
N
F
U
F
MENU Wheel
How To Attach Core Filters
Attach the provided Core Filters to an optional S-Video cable or Audio/Video (RCA plug – RCA plug) cable.
Core Filters reduce interference.
Release the
stoppers on both
ends of the Core
Filter.
Run the cable through the Core Filter, leaving approx.
3 cm of cable between the cable plug and the Core
Filter. Wind the cable around the outside of the Core
Filter as shown in the illustration.
•Wind the cable so that it is not slack.
NOTE:
Take care not to damage the cable.
Close the Core Filter until it
clicks shut.
3 cm
Stopper
When connecting cables, attach the end with the Core Filter to the camcorder.
12 3
Wind once
6 EN
GETTING STARTED
Power
This camcorder’s 2-way power supply system lets you
choose the most appropriate source of power. Do not use
provided power supply units with other equipment.
CHARGING THE BATTERY PACK
1
Make sure you unplug the camcorder’s DC cord from
the AC Power Adapter/Charger. Plug the AC Adapter/
Charger’s power cord into an AC outlet. The POWER
indicator lights.
2
Attach the battery pack with the mark aligned
with the corresponding marks on the AC Power
Adapter/Charger. The CHARGE Indicator begins
blinking to indicate charging has started.
3
When the CHARGE indicator stops blinking but stays
lit, charging is finished. Pull the battery out. Remem-
ber to unplug the AC Adapter/Charger’s power cord
from the AC outlet.
To
AC outlet
CHARGE
indicator
POWER
indicator
DC OUT connector
AC Power
Adapter/Charger
NOTES:
●
Perform charging where the temperature is between 10°C and 35°C. 20°C to 25°C is the ideal temperature
range for charging. If the environment is too cold, charging may be incomplete.
●
Charging times noted above are for a fully discharged battery pack.
●
Charging time varies according to the ambient temperature and the status of the battery pack.
●
To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
●
If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the
camcorder and charging stops.
●
Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.
●
When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may
not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.
●
If the battery operation time remains extremely short even after having been fully charged, the battery is
worn out and needs to be replaced. Please purchase a new one.
Lithium-ion is vulnerable in colder
temperatures.
About Batteries
DANGER! Do not attempt to take the batteries apart, or
expose them to flame or excessive heat, as it may cause a
fire or explosion.
WARNING! Do not allow the battery or its terminals to
come in contact with metals, as this can result in a short
circuit and possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large power
capacity. However, when one is exposed to cold tempera-
tures (below 10°C), its usage time becomes shorter and it
may cease to function. If this happens, place the battery
pack in your pocket or other warm, protected place for a
short time, then re-attach it to the camcorder. As long as
the battery pack itself is not cold, it should not affect
performance.
(If you’re using a heating pad, make sure the battery pack
does not come in direct contact with it.)
Battery pack
BN-V507U
BN-V514U (optional)
Charging time
approx. 1 hr. 30 min.
approx. 3 hrs.
Battery pack
BN-V507U or
BN-V514U
EN7
1
2
To battery
pack mount
To DC OUT
terminal
To AC outlet
AC Power
Adapter/
Charger
DC cord
ATTENTION:
Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.
USING THE BATTERY PACK
1
Insert the terminal end 1 of the battery pack into the
battery pack mount, then firmly push the end 2 of
the battery pack in the direction of the arrow until it
locks into place as shown in the illustration.
•If the battery pack is attached in the wrong position,
a malfunction may occur.
To Detach The Battery Pack . . .
.... while sliding down BATT. RELEASE, detach it.
Power cord
Approximate recording time
BATT. RELEASE
Switch
1 When using GR-DVX10
2 When using GR-DVX9
NOTES:
●
Recording time is reduced significantly under the
following conditions:
•
Zoom or Record-Standby mode is engaged repeatedly.
•
The LCD monitor is used repeatedly.
•
The playback mode is engaged repeatedly.
●
Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in
the illustration).
NOTES:
●
The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from 110 V
to 240 V.
●
For other notes,
pg. 6.
INFORMATION:
VU-V856KIT is a set composed of the
BN-V856U battery pack and AA-V80EG or
AA-V80EK AC Power Adapter/Charger.
Read the VU-V856KIT’s instruction manuals
before using.
It is impossible to charge the BN-V856U battery
pack using the provided AC Power Adapter/
Charger. Use the optional AA-V80EG or
AA-V80EK AC Power Adapter/Charger.
Battery
pack
BN-V507U
BN-V514U
(optional)
BN-V856U
(optional)
LCD monitor on/
Viewfinder off
12
45 min. 50 min.
1 hr. 1 hr.
35 min. 45 min.
6 hrs. 7 hrs.
40 min.
LCD monitor off/
Viewfinder on
12
55 min. 1 hr.
1 hr. 2 hrs.
55 min. 5 min.
8 hrs. 8 hrs.
30 min.
8 EN
PAUSE
Grip Adjustment
1
Separate the Velcro strip.
2
Pass your right hand through the loop and grasp
the grip.
3
Adjust so that your thumb and fingers can easily
operate the START/STOP Button and Power
Zoom Lever. Refasten the Velcro strip.
Viewfinder Adjustment
1
Set the POWER Switch to “ ” while
pressing down the Lock Button located on the
switch and set the MODE Dial to any position.
2
Pull out the viewfinder fully.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
START/STOP Button
Power Zoom Lever
Dioptre Adjustment Control
POWER Switch
GETTING STARTED
(cont.)
MODE Dial
CAUTION:
When using a tripod, be sure to open and
extend its legs fully to stabilise the
camcorder. To prevent damage to the unit
caused by falling over, do not use a small-
sized tripod.
Tripod Mounting
1
Align the screw on the tripod with the camera’s
mounting socket. Then tighten the screw.
Lock Button
EN9
4
FAD
W
W
R
O
F
F
F
E
I
I
A
F
A
A
A
R
P
P
N
F
D
D
D
/
E
E
D
E
E
E
W
–
–
O
R
R
R
I
S
S
M
–
–
–
P
C
H
W
B
B
E
R
U
H
L
.
O
T
I
A
W
L
T
T
C
L
E
E
K
R
1
O
D
T
C
R
N
A
I
L
D
E
T
M
O
A
I
T
S
E
E
C
D
S
U
C
/
K
J
P
R
R
T
C
.
L
N
E
I
O
A
E
M
D
Y
N
E
E
MEN
1
U
.
1
1
2
.
:
0
0
0
0
Date/Time Settings
The date/time is recorded onto the tape at all times, but its
display can be turned on or off during playback ( pg. 41).
1
Set the Operation Switch to “ ” and set the POWER
Switch to “ ” while pressing down the Lock
Button located on the switch, then open the LCD
monitor fully or pull out the viewfinder fully. The
POWER lamp lights and the camcorder is turned on.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ”. Press it and
“DISPLAY MENU” appears.
4
Rotate the MENU wheel to select “CLOCK ADJ.”.
Press it and “day” is highlighted.
Rotate the MENU wheel to input the day. Press it.
Repeat to input the month, year, hour and minute.
Rotate the MENU wheel to select “
1
RETURN”, and
press it twice. The Menu Screen closes.
Built-in Clock’s Rechargeable Lithium Battery
To store the date/time in memory, the clock’s rechargeable
lithium battery is integrated in the camcorder. While the
camcorder is connected to an AC outlet using the AC
Power Adapter/Charger, or while the battery pack attached
to the camcorder continues to supply power, the clock’s
rechargeable lithium battery is always charged. However,
if the camcorder is not used for approx. 3 months, the
clock’s lithium battery will become discharged and the
date/time stored in memory will be lost. When this occurs,
first connect the camcorder to an AC outlet using the AC
Power Adapter/Charger for over 24 hours to charge the
clock’s rechargeable lithium battery. Then perform the
date/time setting before using the camcorder.
Note that the camcorder can be used without setting the
date/time.
NOTE:
Even if you select “CLOCK ADJ.”, if the parameter is not
highlighted the camcorder’s internal clock continues to
operate. Once you move the highlight bar to the first date/
time parameter (day), the clock stops. When you finish
setting the minute and press the MENU wheel, the date
and time begin operation from the date and time you just
set.
Display
MENU Wheel
POWER Switch
DISPLAY MENU
POWER Lamp
Operation
Switch
Lock Button
10 EN
Loading/Unloading A Cassette
The camcorder needs to be powered up to load or eject a
cassette.
1
Slide down and hold OPEN/EJECT in the direction of
the arrow then pull the cassette holder cover open
until it locks. The cassette holder opens automati-
cally.
•Do not touch internal components.
2
Insert or remove a tape and press “PUSH HERE” to
close the cassette holder.
•Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
•When the battery’s charge is low, you may not be
able to close the cassette holder cover. Do not
apply force. Replace the battery with a fully charged
one before continuing.
3
Close the cassette holder cover firmly until it locks
into place.
OPEN/EJECT Switch
Cassette holder
PUSH HERE
Cassette holder cover
Make sure the
window side
is facing out.
Erase protection tab*
Tape
Recording mode
SP LP
30 min. 30 min. 45 min.
60 min. 60 min. 90 min.
80 min. 80 min. 120 min.
Approximate recording time
NOTES:
●
It takes a few seconds for the cassette holder to open. Do not apply force.
●
If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try
again. If the cassette holder still does not open, turn the camcorder off then on again.
●
If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few
minutes later, insert it again.
●
When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before
opening the cassette holder cover.
●
Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder.
●
Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is
closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on
before loading or unloading.
●
When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the
tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder
came out or not. See page 21 for information about recording from the middle of a tape.
*
To Protect Valuable Recordings . . .
.... slide the erase protection tab on the back of
the tape in the direction of “SAVE”. This
prevents the tape from being recorded over.
To record on this tape, slide the tab back to
“REC” before loading it.
GETTING STARTED
(cont.)
EN11
1
R
S
Z
S
G
B
I
D
R
E
O
O
N
A
E
D
E
E
C
U
O
A
I
E
M
C
T
N
M
P
N
P
N
O
A
U
M
D
/
U
.
M
R
O
M
U
T
M
E
N
D
M
O
P
A
B
M
R
E
O
D
L
E
O
A
D
E
L
R
D
E
Y
E
ME
S
L
N
P
P
U
Recording Mode Setting
Set the tape recording mode depending on your preference.
1
Set the Operation Switch to “ ” and set the POWER
Switch to “ ” while pressing down the Lock
Button located on the switch, then open the LCD
monitor fully or pull out the viewfinder fully. The
POWER lamp lights and the camcorder is turned on.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ” and press it.
“CAMERA MENU” appears.
4
Rotate the MENU wheel to select “REC MODE” and
press it. The Sub Menu appears. Select “SP” or “LP”
by rotating the MENU wheel and press it. Rotate the
MENU wheel to select “
1
RETURN”, and press it
twice. The Menu Screen closes.
•Audio Dubbing ( pg. 76) is impossible on a tape
recorded in the LP mode.
•“LP” (Long Play) is more economical, providing
1.5 times the recording time.
NOTES:
●
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
●
It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
●
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
Display
Menu Screen
Sub Menu
MENU Wheel
POWER Switch
POWER Lamp
Operation
Switch
Lock Button
12 EN
GETTING STARTED
(cont.)
MultiMediaCard
Clipped edge
Card Cover
Loading A MultiMediaCard
The provided MultiMediaCard is already inserted in the
camcorder when you receive the camcorder.
1
Make sure the camcorder’s power is off.
2
Open the card cover.
3
Insert the MultiMediaCard clipped edge first.
•Do not touch the terminal on the reverse side of the
label.
4
To close the card cover, push it until you hear a click.
NOTES:
●
Be sure to use only MultiMediaCards marked
“ ”.
●
Some brands of MultiMediaCards are not compatible
with this camcorder. Before purchasing a
MultiMediaCard, consult its manufacturer or dealer.
To Unload A MultiMediaCard . . .
.... in step 3 push the MultiMediaCard, which then comes
out of the camcorder automatically. Pull it out and
close the card cover.
ATTENTION:
Do not insert/remove the MultiMediaCard while the
camcorder is turned on, as this may cause the
MultiMediaCard to be corrupted or cause the
camcorder to become unable to recognize whether or
not the card is installed.
Label
EN13
XGA
FINE
Picture Quality/Size Mode Setting
Picture quality and size can be selected to best match your
needs. Four different modes are available: XGA (1024 x
768 pixels) FINE, XGA STD, VGA (640 x 480 pixels) FINE
and VGA STD, listed in order of quality.
1
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch and set
the MODE Dial to “ ”, then open the LCD monitor
fully. The POWER lamp lights and the camcorder is
turned on.
2
Press IMAGE SIZE/RES. until the desired mode
appears.
NOTES:
●
The number of storable images depends on the selected
Picture Quality/Size mode as well as the composition of
the subjects in the images.
●
When the MODE Dial is set to “
D
U
A
L
”, only the picture
quality can be set.
Picture Quality/Size
Mode
XGA FINE
XGA STD
VGA FINE
VGA STD
Picture size
Display
Lock Button
IMAGE SIZE/RES. Button
Picture quality
POWER Lamp
Approximate Number of Storable Images
MultiMediaCard
4 MB
(optional)
12
36
26
76
8 MB 8 MB
(provided, (optional)
with Sound
Effects pre-
stored)
21 24
64 75
46 54
133 155
POWER Switch
MODE Dial
14 EN
GETTING STARTED
(cont.)
F.AUTO
Operation Mode
Choose the appropriate operation mode according to your
preference using the POWER Switch, Operation Switch
and MODE Dial.
When the Operation Switch is set to “ ”,
“F. AUTO” appears. When set to “ ”, there is
no indication.
To turn on the camcorder, set the POWER
Switch to any operation mode except “OFF”
while pressing down the Lock Button located
on the switch.
POWER Switch
POWER Lamp
POWER Switch Position
:
Allows you to record on a tape or in the
MultiMediaCard.
OFF:
Allows you to switch off the camcorder.
:
Allows you to play back a recording on the tape or to
transfer a still image recorded on the tape or in the
MultiMediaCard to a computer.
M
E
M
O
R
Y
P
L
A
Y
:
Allows you to display an image stored in the
MultiMediaCard.
Operation Switch Position
(Manual):
Allows you to set various recording functions using
the Menus. If you want more creative capabilities than
Full Auto recording, try this mode.
(Full Auto):
Allows you to record using NO special effects or
manual adjustments. Suitable for standard recording.
When the POWER Switch is set to “
M
E
M
O
R
Y
P
L
A
Y
”,
the type of file (IMAGE, E-MAIL CLIP or
SOUND) is displayed. When set to “ ”
or “ ”, there is no indication.
Operation
Switch
Lock Button
EN15
DUAL
P
S
V
I
D
E
O
D
U
A
L
D
S
C
MODE
MODE Dial
Function
•Allows you to record video on
a tape and store still images in a
MultiMediaCard simultaneously
( pg. 24).
•File size of still images: 640 x
480 pixels
•Video quality is the same as in
the VIDEO mode.
•Allows you to record video and
still images on a tape. Approx.
6 seconds of a still image is
inserted between video
recordings ( pg. 18).
•Zoom magnification over 10X
is available ( pg. 20, 27).
•Allows you to record moving
images (successive jitter-free
still images) with superior
quality on a tape ( pg. 22).
The still images can also be
processed on a PC or printed
out.
•Zoom magnification over 10X
is available ( pg. 20, 27).
•Playback of images recorded in
this mode is not smooth.
•Allows you to record still
images in a MultiMediaCard
( pg. 13, 19).
•File size: 1024 x 768 pixels
(XGA), 640 x 480 pixels (VGA)
MODE Dial
Position
D
U
A
L
VIDEO
(Progressive
mode)
The following indications appear in the upper
left corner, depending on the MODE Dial
position.
DUAL :
When set to “
D
U
A
L
”
No display :
When set to “VIDEO”
PS :
When set to “
”
XGA or VGA :
When set to “
”
16 EN
180°
90°
25
90 min
89 min
3 min
2 min
1 min0 min
min
BR I GHT
RECORDING
Basic Recording For Video
POWER Lamp
Tally lamp
(lights while
recording is
in progress)
MODE Dial
START/STOP Button
Tape remaining
time indicator
(Approximate)
(Now calculating)
(Blinking) (Blinking) (Blinking)
Display
To Adjust The Brightness Of The Display
.... rotate the MENU wheel until the bright level indicator
on the display moves and the appropriate brightness is
reached.
•It is also possible to adjust the brightness of the viewfinder.
POWER Switch
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
●
Power (
pg. 6)
●
Grip Adjustment (
pg. 8)
●
Viewfinder Adjustment (
pg. 8)
●
Load A Cassette (
pg. 10)
●
Recording Mode Setting (
pg. 11)
1
Set the MODE Dial to “VIDEO” and set the POWER
Switch to “ ” while pressing down the Lock
Button located on the switch.
Shooting while using the viewfinder:
Make sure the
LCD monitor is closed and locked. Pull out the
viewfinder fully.
•Be sure to pull out the viewfinder until you hear a
click, otherwise it may be pushed back in during
use.
Shooting while using the LCD monitor:
Make sure
the viewfinder is pushed back in. Open the LCD
monitor fully.
•The POWER lamp lights and the camcorder enters
the Record-Standby mode. “PAUSE” is displayed.
2
Press START/STOP. “ ” appears while recording is
in progress.
To Stop Recording . . .
.... press START/STOP. The camcorder re-enters the
Record-Standby mode.
MENU Wheel
Lock Button
EN17
Self-Recording
JOURNALISTIC SHOOTING
In some situations, different shooting angles may
provide more dramatic results. Hold the camcorder
in the desired position and tilt the LCD monitor in
the most convenient direction. It can rotate 270°
(90° downward, 180° upward).
NOTES:
●
When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this
happens, use the viewfinder instead.
●
The image will not appear simultaneously in the LCD monitor and the viewfinder.
●
The cassette holder cannot be opened unless a power supply is attached.
●
There may be a delay after you open the cassette holder cover until the cassette holder opens. Do not use force.
●
Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing
the cassette holder cover.
●
The time required to calculate and display the remaining tape length, and the accuracy of the calculation,
may vary according to the type of tape used.
●
“TAPE END” appears when the tape reaches its end, and the power goes off automatically if left in this
condition for 5 minutes. “TAPE END” also appears when a cassette at its end is loaded.
●
If the Record-Standby mode continues for 5 minutes, the camcorder’s power shuts off automatically. To turn
the camcorder on again, push back and pull out the viewfinder again or close and re-open the LCD monitor.
●
When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors
may occur when editing the tape. To avoid this, refer to “Recording from the middle of a tape” (
pg. 21).
●
During recording, sound is not heard from the speaker. To hear the sound, connect optional headphones to
the headphone connector. The sound volume is at the level it was adjusted to during playback (
pg. 40).
●
To turn the tally lamp off during recording,
pg. 26, 27.
●
To remove the indications from the camcorder’s display during recording,
pg. 26, 29.
SELF-RECORDING
You can shoot yourself while viewing your own
image in the LCD monitor. Open the LCD monitor
and tilt it upward 180° so that it faces forward, then
point the lens toward yourself and start recording.
18 EN
FULL
Snapshot mode
with no frame*
PIN-UP
Pin-Up mode
1
R
S
Z
S
G
B
I
D
R
E
O
O
N
A
E
D
E
E
C
U
O
A
I
E
M
C
T
N
M
P
N
P
N
O
A
U
M
D
/
U
.
M
R
O
M
U
T
M
E
N
D
M
O
P
A
B
M
R
E
O
D
L
E
O
A
D
E
L
R
D
E
Y
E
ME
F
P
N
U
I
U
L
N
L
–UP
RECORDING
Basic Recording For Video (cont.)
Snapshot (For Video Recording)
This feature lets you record still images that look like
photographs onto a tape.
SNAPSHOT MODE SELECTION
1
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch and the
MODE Dial to “VIDEO” or “ ”, then set the
Operation Switch to “ ”. Pull out the viewfinder
fully or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ”. Press it and
“CAMERA MENU” appears.
4
Rotate the MENU wheel to select “SNAP MODE”,
then press it.
5
Rotate the MENU wheel to select the desired
Snapshot mode, then press it.
Rotate the MENU wheel to select “
1
RETURN” and
press it twice. The Menu Screen closes.
SNAPSHOT RECORDING
1
Press SNAPSHOT.
If you press during Record-Standby . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 6 seconds, then the
camcorder re-enters the Record-Standby mode.
If you press during Recording . . .
.... “PHOTO” appears and a still image will be
recorded for approx. 6 seconds, then the normal
recording resumes.
•To use the flash, pg. 30.
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar to serial
photography. (Interval between still images: approx. 1 second)
NOTES:
●
To remove the shutter sound,
“BEEP/TALLY” on pg. 27.
●
If Snapshot recording is not possible, “PHOTO” blinks when
SNAPSHOT is pressed.
●
If Programme AE with special effects (
pg. 36) is engaged,
certain modes of Programme AE with special effects are
disabled during Snapshot recording. In such a case, the icon
blinks.
●
If SNAPSHOT is pressed when “DIS” is set to “ON”
(
pg. 28), the Stabiliser will be disabled.
●
To dub images recorded on a tape to a MultiMediaCard,
pg. 65.
●
To reduce the Red-Eye effect in the subject’s eyes when the
flash fires,
pg. 30.
●
During playback as well, all snapshot modes are available
when “
COPY” is set to “OFF” in the Menu
Screen (
pg. 41).
●
When a headphone set is connected to the headphone
connector, the shutter sound is not heard from the speaker,
however it is recorded onto the tape.
Display
SNAPSHOT Button
MODE Dial
Operation Switch
POWER Switch
MENU Wheel
Menu Screen
* There is the sound effect of a shutter closing.
When the MODE Dial is set to “
”, snapshot
recording will be performed with higher quality
(
pg. 22).
Lock Button
EN19
RECORDING
Basic Recording For Digital Still Camera (D.S.C.)
Basic Shooting (Snapshot)
You can use your camcorder as a Digital Still Camera for
taking snapshots.
NOTE:
You should already have performed the procedures listed below. If
not, do so before continuing.
●
Power (
pg. 6)
●
Grip Adjustment (
pg. 8)
●
Viewfinder Adjustment (
pg. 8)
●
Loading A MultiMediaCard (
pg. 12)
●
Picture Quality/Size Mode Setting (
pg. 13)
1
Set the MODE Dial to “ ”and the POWER Switch
to “ ” while pressing down the Lock Button
located on the switch. Open the LCD monitor fully or
pull out the viewfinder fully.
2
Press SNAPSHOT halfway. The screen becomes a still
image, which is captured into the camcorder’s
memory. However, it is not rcorded until SNAPSHOT
is pressed fully.
•At this moment, if you release SNAPSHOT,
snapshot recording will be cancelled.
3
Press SNAPSHOT fully.
The image is recorded in the MultiMediaCard.
•Still images are recorded in the snapshot mode with
no frame.
•To use the flash, pg. 30.
To Delete Unwanted Still Images . . .
.... when unwanted still images are stored in the
MultiMediaCard or its memory is full, refer to “Deleting
Files” ( pg. 49) and delete unwanted still images.
To Remove The Shutter Sound . . .
.... when you do not want to hear the shutter sound, set
BEEP/TALLY to “OFF” on the Menu Screen ( pg. 26,
27). The sound is no longer heard from the speaker.
NOTES:
●
Even if “DIS” is set to “ON” (
pg. 28), the Stabiliser will be
disabled.
●
If Snapshot recording is not possible, “PHOTO” blinks when
SNAPSHOT is pressed.
●
If Programme AE with special effects (
pg. 36) is engaged,
certain modes of Programme AE with special effects are disabled
during Snapshot recording. In such a case, the icon blinks.
●
If shooting is not performed for approx. 5 minutes when the
POWER Switch is set to “
” and power is supplied from
the battery pack, the camcorder shuts off automatically to save
power. To perform shooting again, close the LCD monitor and
re-open it. When using the viewfinder, push back it in and pull it
out again.
●
The Motor Drive mode (
pg. 18) is disabled when the MODE
Dial is set to “
”.
●
To reduce the Red-Eye effect in the subject’s eyes when the flash
fires,
pg. 30.
●
When a headphone set is connected to the headphone
connector, the shutter sound is not heard from the speaker.
●
Still images taken are compliant to DCF (Design rules for
Camera File systems). They do not have any compatibility with
devices which are not compliant to DCF.
●
In the XGA mode, images shot using a 680,000-pixel Progres-
sive Scan CCD (effective area: 630,000 pixels, 962 x 654 pixels)
are converted and stored in the XGA mode file size (1024 x 768
pixels).
Number of shots taken
Displays the number of images
that have already been shot.
Total number of shots
Displays the approximate total number of shots that
can be stored, including those already taken. The
number increases or decreases depending on the shots
stored, the Picture Quality/Size mode, MODE Dial
setting, etc.
Picture Quality/Size mode
Displays the Picture Quality/Size mode of the stored
image. There are 4 modes available:
XGA FINE, XGA STD, VGA FINE, VGA STD (in order
of quality) (
pg. 13).
Shooting icon
Appears and blinks during shooting.
Card icon
Appears during shooting and blinks
when a MultiMediaCard is not
loaded.
Display
SNAPSHOT Button
MODE Dial
POWER Switch
MENU Wheel
FULL
Snapshot mode
with no frame
Lock Button
There is the sound effect of a shutter closing.
20 EN
10
x
W
T
1
x
W
T
10
x
W
T
20
x
W
T
40
x
W
T
RECORDING
Basic Recording For Video And D.S.C.
Zoom in (T: Telephoto)
Zoom out (W: Wide angle)
Power Zoom Lever
Zoom display
FEATURE:
Zooming
PURPOSE:
To produce the zoom in/out effect, or an instantaneous
change in image magnification.
OPERATION:
Zoom In
Slide the Power Zoom Lever towards “T”.
Zoom Out
Slide the Power Zoom Lever towards “W”.
The further you slide the Power Zoom Lever, the
quicker the zoom action.
NOTES:
●
Focusing may become unstable during Zooming. In
this case, set the zoom while in Record-Standby,
lock the focus by using the manual focus
(
pg. 25), then zoom in or out in Record mode.
●
Zooming is possible to a maximum of 200X, or it
can be switched to 10X magnification using the
optical zoom (
pg. 27).
●
Zoom magnification of over 10X is done through
Digital image processing, and is therefore called
Digital Zoom.
●
During Digital zoom, the quality of image may
suffer.
●
Digital zoom cannot be used in the following cases:
•
When digital image processing, such as Picture
Wipe/Dissolve (
pg. 34, 35) or Video Echo
(
pg. 36), is activated.
•
When the MODE Dial is set to “
D
U
A
L
or “ ”.
●
Macro shooting (as close as approx. 5 cm to the
subject) is possible when the Power Zoom Lever is
set all the way to “W”. Also see “TELE MACRO” in
the Menu Screen on page 28.
Approximate zoom ratio
Digital zoom
zone
10X (optical)
zoom zone
POWER Switch
EN21
NOTE: Recording From The Middle Of A Tape
Time Code
During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded
scene on the tape during playback.
If recording starts from a blank portion, the time code begins counting from “00:00:00”
(minute:second:frame). If recording starts from the end of a previously recorded scene, the time code
continues from the last time code number.
To perform Random Assemble Editing ( pg. 70 – 75), time code is necessary. If during recording a blank
portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time
code starts counting up again from “00:00:00”. This means the camcorder may record the same time
codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The
Middle of A Tape” below in the following cases;
•When shooting again after playing back a
recorded tape.
•When power shuts off during shooting.
•When a tape is removed and re-inserted during
shooting.
•When shooting using a partially recorded tape.
•When shooting on a blank portion located
partway through the tape.
•When shooting again after shooting a scene
then opening/closing the cassette holder cover.
Recording From The Middle Of A Tape
1. Play back a tape or use Blank Search ( pg. 43) to find the spot at which you want to start recording,
then engage the Still Playback mode ( pg. 40).
2. Set the POWER Switch to “ ” while pressing down the Lock Button located on the switch, then
start recording.
NOTES:
●
The time code cannot be reset.
●
During fast-forwarding and rewinding, the time code indication does not move smoothly.
●
The time code is displayed only when “TIME CODE” is set to “ON” (
pg. 29, 41).
Shooting start point
Newly recorded sceneBlankAlready recorded scene
Time code
05:43:21
Time code
00:00:00
Tape
Time code
00:00:00
Shooting start pointShooting stop point
TC
12
:
34
:
24
Display
When a blank portion is recorded on a tape
Shooting start point
Time code
05:43:21
Time code
05:44:00
Tape
Time code
00:00:00
Shooting start pointShooting start point
Proper recording
Latest sceneNew sceneAlready recorded scene
Frames
(25 frames = 1 second)
Seconds
Minutes
Frames are not displayed
during recording.
22 EN
Progressive Mode Recording
This mode lets you record moving images (successive
jitter-free still images) onto a tape. Images can then played
back jitter-free, with superior quality. High-resolution still
images can also be processed on a personal computer or
can be printed out ( pg. 59).
1
Set the MODE Dial to “ ”, then set the POWER
Switch to “ ” while pressing down the Lock
Button located on the switch. Pull out the viewfinder
fully or open the LCD monitor fully.
2
To start Progressive Mode Recording, press START/
STOP.
To End Progressive Mode Recording . . .
.... press START/STOP. The camcorder enters the Record-
Standby mode.
NOTES:
●
When an image recorded using the Progressive Mode is
played back, the image may not look natural.
●
When the MODE Dial is set to “ ”, Picture Wipe/
Dissolve (
pg. 34) and some Programme AE with
special effects (
pg. 36) cannot be used.
●
If SNAPSHOT is pressed in the PS mode, a snapshot will
be recorded with higher quality than in VIDEO mode.
(
pg. 18).
SNAPSHOT Button
START/STOP Button
Lock Button
RECORDING
Advanced Features For Video And D.S.C.
MODE Dial
POWER Switch
EN23
Description of Progressive Scan CCD
Progressive Scan is a special image sensing method which, unlike conventional interlace scanning, is able to
pick up all the lines of picture information in one Scan. Since the Progressive Scan CCD is capable of
outputting 50 full Frames* per second — twice the amount of conventional systems — it is able to deliver a
high quality picture even when its output signal is converted to a format that can be viewed on a TV screen.
* A PAL TV screen image is composed of 25 Frames per second. 1 Frame is made up of 2 Fields.
Scan CScan A
1 Frame
Scan B
Skip
Scan D
Skip
Scan A
1. Regular shooting of moving images
Records 25 odd and 25 even image Fields, for a total of 50
per second. Since there is a time lag between an odd and
even Field, when they are combined to make 1 Frame the
part of the image that is moving appears as image jitter.
However, during normal playback, the moving picture
looks smooth and natural.
2. Progressive mode shooting of moving images (Progressive Mode Recording pg. 22)
Scan A is recorded, divided into an odd- and even-number Field, and then Scan B is skipped. Scans C and D
are handled in the same way as Scans A and B, as illustrated below, thereby recording 25 Frames per second.
Since each recorded odd- and even-number Field originates from the same Scan there is no time lag between
them, and so when they are combined into a Frame and a still image is displayed on a TV or PC monitor the
picture does not look jittery. However, when moving images are played back, the picture can look unnatural.
Even-number
Field
25 Frames per second
Odd-number
Field
Odd-number
Field
Even-number
Field
Scan B
24 EN
F
O
C
U
S
B
A
C
K
L
I
G
H
T
E
X
P
O
S
U
R
E
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Dual Shooting
Lets you record images on a tape and store still images in a
MultiMediaCard simultaneously. In other words, it is
possible to store still images in the MultiMediaCard
without interrupting image recording on the tape.
1
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch and the
MODE Dial to “
D
U
A
L
” . Pull out the viewfinder fully
or open the LCD monitor fully.
2
While recording to a tape, press SNAPSHOT halfway.
A still image is displayed in the lower right corner of
the screen where the video image being recorded is
displayed.
•At this moment, if you release SNAPSHOT,
snapshot recording will be cancelled.
3
Press SNAPSHOT fully. The displayed still image is
stored in the MultiMediaCard.
NOTES:
●
If SNAPSHOT is pressed in the Record-Standby mode,
only a still image is stored in the MultiMediaCard. Video
recording does not take place.
●
If SNAPSHOT is pressed when “DIS” is set to “ON”
(
pg. 28), the Stabiliser will be disabled.
●
The Stabiliser is less effective in the DUAL mode than in
other modes.
●
The flash is disabled during video recording.
●
Still images are stored in the MultiMediaCard in VGA
mode file size (
pg. 15).
●
When the MODE Dial is set to “DUAL”, all Fade/Wipe
Effects and some Programme AE with special effects
cannot be used (
pg. 34 – 36).
MODE Dial
Operation Switch
Lock Button
FOCUS Button (
3
)
SNAPSHOT Button
MENU Wheel
Video image
Half-pressed
position
Still image
Fully-pressed
position
Released position
POWER Switch
EN25
FOCUS FOCUS
While focusing on a nearer
subject
While focusing on a further
subject
FEATURE:
Auto Focus
PURPOSE:
The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx.
5 cm to the subject) to infinity.
However, correct focus may not be obtainable in the situations listed below (in these cases use manual
focusing):
•When two subjects overlap in the same scene.
•When illumination is low.*
•When the subject has no contrast (difference in brightness and darkness), such as a flat, one-colour wall,
or a clear, blue sky.*
•When a dark object is barely visible in the viewfinder.*
•When the scene contains minute patterns or identical patterns that are regularly repeated.
•When the scene is affected by sunbeams or light reflecting off the surface of a body of water.
•When shooting a scene with a high-contrast background.
* The following low-contrast warnings appear blinking: , , and
NOTES:
●
If the lens is smeared or blurred, accurate focusing is not possible. Keep the lens clean, wiping with a
piece of soft cloth if it gets dirty. When condensation occurs, wipe with a soft cloth or wait for it to dry
naturally.
●
When shooting a subject close to the lens, zoom out first (
pg. 20). If zoomed-in in the auto focus
mode, the camcorder may automatically zoom out depending on the distance between the camcorder
and the subject. This will not occur when “TELE MACRO” (
pg. 28) is activated.
FEATURE:
Manual Focus
PURPOSE:
To obtain correct focus.
OPERATION:
1) If you are using the viewfinder, you should already have made the necessary viewfinder adjustments
( pg. 8).
2) Set the Operation Switch to “ ” and set the POWER Switch to “ ” while pressing down the Lock
Button located on the switch, then press FOCUS (
3
). The manual focus indicator appears.
3) To focus on a farther subject, rotate the MENU wheel towards “+”. “ ” appears and blinks.
To focus on a nearer subject, rotate the MENU wheel towards “–”. “ ” appears and blinks.
4) Press the MENU wheel. Focus adjustment is complete.
To reset to Auto Focus, press FOCUS (
3
) twice or set the Operation Switch to “ ”.
If FOCUS (
3
) is pressed once, the camcorder will enter the focus adjustment mode again.
NOTES:
●
Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If
you focus in on a subject in the wide-angle position, sharply focused images cannot be obtained when
zoomed up because the depth-of-field is reduced at longer focal lengths.
●
When the focus level cannot be adjusted any further or closer, “ ” or “ ” will blink.
Focus detection zone
26 EN
1
D
S
5
T
W
W
F
F
R
I
E
S
E
I
I
L
L
E
S
L
L
D
N
A
A
M
T
F
E
E
D
S
S
A
U
–
H
H
N
R
T
M
M
C
U
N
I
A
O
U
A
A
M
C
D
T
D
L
E
R
E
J
R
O
.
ME
O
O
N
F
N
U
F
4
FAD
W
W
R
O
F
F
F
E
I
I
A
F
A
A
A
R
P
P
N
F
D
D
D
/
E
E
D
E
E
E
W
–
–
O
R
R
R
I
S
S
M
–
–
–
P
C
H
W
B
B
E
R
U
H
L
.
O
T
I
A
W
L
T
T
C
L
E
E
K
R
1
O
D
T
C
R
N
A
I
L
D
E
T
M
O
A
I
T
S
E
E
C
D
S
U
C
/
K
J
P
R
R
T
C
.
L
N
E
I
O
A
E
M
D
Y
N
E
E
MEN
1
U
.
1
1
2
.
:
0
0
0
0
END
1
R
S
Z
S
G
B
I
D
R
E
O
O
N
A
E
D
E
E
C
U
O
A
I
E
M
C
T
N
M
P
N
P
N
O
A
U
M
D
/
U
.
M
R
O
M
U
T
M
E
N
D
M
O
P
A
B
M
R
E
O
D
L
E
O
A
D
E
L
R
D
E
Y
E
ME
S
L
N
P
P
U
Display
Menu Screen
MENU Wheel
Lock Button
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Using Menus For Detailed Adjustment
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings ( pg. 27 – 29) .
1
Set the Operation Switch to “ ” and set the POWER
Switch to “ ” while pressing down the Lock
Button located on the switch, then pull out the
viewfinder fully or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select the desired function
icon, and press it. The selected function menu
appears.
4
Function menu setting depends on the function.
If you have selected “ ”, “ ” or “ ” . . .
.... see pg. 27.
If you have selected “ ”, “ ” or “ ” . . .
.... go to step 5.
5
Rotate the MENU wheel to select the desired function
and press it. The Sub Menu appears.
Then, rotate the MENU wheel to select the parameter,
and press it. Selection is complete.
6
Rotate the MENU wheel to select “
1
RETURN” and
press it twice. The Menu Screen closes.
•The icon represents “END”.
Sub Menu
Normal Screen
POWER Switch
Operation Switch
EN27
Menu Screen Explanations
: Factory-preset
CONTINUED ON NEXT PAGE
CAMERA MENU
FADER/WIPE
P.AE/EFFECT
W.BALANCE
REC MODE
SOUND
MODE
ZOOM
GAIN UP
BEEP/
TALLY
SNAP
MODE
ID
NUMBER
12 BIT
16 BIT
10X
40X
200X
NOTE:
The “ CAMERA MENU” settings are effective when the Operation Switch is set to both “ ” and “ ”.
Refer to “Fade/Wipe Effects” ( pg. 34, 35).
Refer to “Programme AE With Special Effects” ( pg. 36).
Refer to “White Balance Adjustment” and “Manual White Balance Operation”
( pg. 39).
Allows you to set the recording mode (SP or LP) depending on your
preference ( pg. 11).
Enables video recording of stereo sound on four separate channels, and is
recommended for use when performing audio dubbing. (Equivalent to the 32
kHz mode of previous models)
Enables video recording of stereo sound on two separate channels. (Equivalent
to the 48 kHz mode of previous models)
When set to “10X” while using digital zoom, the zoom magnification will
reset to 10X since digital zoom will be disengaged.
Allows you to use the Digital Zoom. By digitally processing and magnifying
images, zooming is possible from 10X (the optical zoom limit), to a maximum
of 40X digital magnification.
Allows you to use the Digital Zoom. By digitally processing and magnifying
images, zooming is possible from 10X (the optical zoom limit), to a maximum
of 200X digital magnification.
Refer to “Snapshot (For Video Recording)” ( pg. 18).
Allows you to shoot dark scenes with no picture brightness adjustment.
The overall appearance may be grainy, but the image is bright.
The shutter speed is automatically adjusted (1/25 — 1/200 sec.). Shooting a
subject in low or poor lighting at 1/25 sec. shutter speed provides a brighter
image than in the AGC mode, but the subject’s movements are not smooth or
natural. The overall appearance may be grainy. When shooting a subject in
low lighting in this mode, “ ” is displayed.
The tally lamp comes on to signal the start of recording. Instead of a beep, a
melody sounds when any operation is performed. It also activates the shutter
sound effect ( pg. 18, 19).
The tally lamp comes on to signal the start of recording.
The beep sounds when the power is turned on or off, and at the beginning and end
of recording. Also to activate the shutter sound effect ( pg. 18, 19).
The tally lamp remains off at all times.
Even though not heard while shooting, shutter sound is recorded on the tape.
This number is necessary when connecting the camcorder to a device such as a computer
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
OFF
AGC
AUTO
ON: MEL.
ON:BEEP
OFF
FULL
PIN-UP
28 EN
Menu Screen Explanations (cont.)
RECORDING
Advanced Features For Video And D.S.C. (cont.)
DIS
SELF-
TIMER
5S
TELE
MACRO
WIDE
MODE
DEMO.
MODE
CAMERA MENU
Demonstrates certain functions such as Programme AE with special effects,
etc., and can be used to confirm how these functions operate. When “DEMO.
MODE” is set to “ON” and the Menu Screen is closed, demonstration starts.
Performing any operation during the demonstration stops the demonstration
temporarily. If no operation is performed for more than 1 minute after that,
the demonstration will resume.
NOTES:
● If a tape is in the camcorder, the demonstration cannot be turned on.
● “DEMO. MODE” remains “ON” even if the camcorder power is turned off.
● If “DEMO. MODE” remains “ON”, some functions will not be available.
After viewing demo, set to “OFF”.
Automatic demonstration will not take place.
To compensate for unstable images caused by camera-shake, particularly at
high magnification.
NOTES:
● Accurate stabilisation may not be possible if hand shake is excessive, or
under the following conditions:
•When shooting subjects with vertical or horizontal stripes.
•When shooting dark or dim subjects.
•When shooting subjects with excessive backlighting.
•When shooting scenes with movement in various directions.
•When shooting scenes with low-contrast backgrounds.
● Switch off this mode when recording with the camcorder on a tripod.
● The “ ” indicator blinks or goes out if the Stabiliser cannot be used.
Refer to “Self-Timer” ( pg. 32).
Refer to “5-Second Recording” ( pg. 33).
Allows you to record a few frames only. By using an inanimate object and
changing its position between shots, you can record the subject as though it is
moving ( pg. 33).
Usually the distance to a subject where the lens is in focus depends on the
zoom magnification. Unless there is a distance more than 1m to the subject,
the lens is out of focus at the maximum telephoto setting. When set to “ON”,
you can shoot a subject as large as possible at a distance of approx. 60 cm.
•Depending on the zoom position, the lens may go out of focus.
Records with no change in the screen ratio. For playback on a TV with a
normal screen ratio.
Inserts black bands at the top and bottom of the screen. During playback on
wide-screen TVs, the black bands at the top and bottom of the screen are cut
and the screen ratio becomes 16:9. appears. When using this mode, refer
to your wide-screen TV’s instruction manual. During playback/recording on
4:3 TVs/LCD monitor/viewfinder, black bands are inserted at the top and
bottom of the screen and the image appears like a letterboxed 16:9 movie.
•
“CINEMA” mode is effective only when the MODE Dial is set to “VIDEO” or “ ”.
For playback on TVs with an aspect ratio of 16:9. Naturally expands the image
to fit the screen without distortion. appears. When using this mode, refer to
your wide-screen TV’s instruction manual. During playback/recording on 4:3
TVs/LCD monitor/viewfinder, the image is elongated vertically.
•
“SQUEEZE” mode is effective only when the MODE Dial is set to “VIDEO” or “ ”.
“
SW
” appears. The zoom range is extended beyond the maximum optical
zoom wide angle range. This mode’s wide angle setting is equivalent to using
a 0.7X wide conversion lens. Zooming is possible from 0.7X to 10X. This
mode is suitable for shooting in a small room.
•“PS-WIDE” mode is effective only when the MODE Dial is set to “ ”.
OFF
ON
ON
OFF
OFF
5S
ANIM.
OFF
ON
OFF
CINEMA
SQUEEZE
PS-WIDE
MANUAL MENU
: Factory-preset
EN29
NOTES:
●
The “MANUAL MENU” settings are effective only when the Operation Switch is set to “ ”.
●
“DISPLAY MENU” functions which are set when the POWER Switch is set to “ ” are also applied
when the POWER Switch is set to “ ” (
pg. 41). “CLOCK ADJ.” only appears when the POWER
Switch is set to “ ”.
●
The “DISPLAY MENU” settings are effective even when the Operation Switch is set to “ ”.
●
The “ON SCREEN” setting can also be changed by pressing the DISPLAY Button on the remote control
(provided) (
pg. 57, 60, 71).
: Factory-preset
DISPLAY MENU
FLASH
FLASH
ADJ.
ON
SCREEN
DATE/
TIME
TIME
CODE
CLOCK
ADJ.
WIND
CUT
Disengages the function which cuts down on noise created by wind.
Helps cut down on noise created by wind. “ ” appears. The quality of the
sound will change. This is normal.
Refer to “Snapshot Flash” ( pg. 30).
Refer to “Flash Brightness Adjustment” ( pg. 31).
Keeps the camcorder’s display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorder’s display appear on screen when the camcorder is
connected to a TV.
Keeps the indications (except the tape running indicator, warnings, date, time,
time code, etc.) from appearing in the camcorder. Also keeps the camcorder’s
display (except the date, time and time code) from appearing on the
connected TV screen.
Displays the date/time for approx. 5 seconds in the following cases:
•When the POWER Switch is set from “OFF” to “ ” or “ ”.
•When playback starts. The camcorder displays the date/time when scenes
are recorded.
•When the date is changed during playback.
The date/time does not appear.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time ( pg. 9).
LCD
LCD/TV
SIMPLE
AUTO
OFF
ON
OFF
ON
OFF
ON
MANUAL MENU
30 EN
1
D
S
5
T
W
W
F
F
R
I
E
S
E
I
I
L
L
E
S
L
L
D
N
A
A
M
T
F
E
E
D
S
S
A
U
–
H
H
N
R
T
M
M
C
U
N
I
A
O
U
A
A
M
C
D
T
D
L
E
R
E
J
R
O
.
ME
A
A
O
O
N
U
U
N
F
U
T
T
F
O
O
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Snapshot Flash
The flash can be used when a snapshot is taken in Record-
Standby ( pg. 18, 19).
•In Full Auto mode, the flash automatically fires if it is
dark ( appears).
•In Manual mode, you can select the “FLASH” setting as
follows:
AUTO : Fires automatically if it is dark ( appears).
AUTO : Fires automatically if it is dark ( appears)
and reduces the Red-Eye effect in the subject’s
eyes.
ON : Always fires.
OFF : Will not fire.
Perform the procedure below.
1
Set the Operation Switch to “ ” and set the POWER
Switch to “ ” while pressing down the Lock
Button located on the switch, then pull out the
viewfinder or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ”, and press it.
“MANUAL MENU” appears.
4
Rotate the MENU wheel to select “FLASH”, and press
it. The Sub Menu appears.
5
Rotate the MENU wheel to select “AUTO”, “AUTO
”, “ON” or “OFF”, and press it. Rotate the MENU
wheel to select “
1
RETURN”. Press it twice to close
the Menu Screen.
If “AUTO ” Is Selected . . .
.... the Red-Eye reduction indicator lights. Press
SNAPSHOT. The flash fires twice. The first flash is for
reduction of the human eye’s red reflection and the
second flash is for the actual recording.
Display
NOTES:
●
Do not fire the flash at a person at short range.
●
The flash does not fire when the flash is set to “OFF” in the Menu Screen, and also when the battery
remaining power is low. Moreover, the flash does not fire when it is set to “AUTO” in the Menu Screen with
GAIN UP set to “OFF” (
pg. 27) and with Programme AE with special effects set to “TWILIGHT”
(
pg. 36).
●
When taking several snapshots in succession (Motor Drive Mode), the flash fires only during the first one.
●
Although images shot with a flash tend to look whiter than they actually are, to compensate for this the
camcorder automatically darkens the picture when using the flash. When shooting a subject at a distance
where the flash light cannot reach (over approx. 2 m), push down the flash to prevent the picture from
becoming too dark or becoming too tinted.
●
The colour tone changes depending on the background lighting conditions, such as under fluorescent or
halogen lamps.
●
To change the brightness of the flash,
“Flash Brightness Adjustment” (
pg. 31).
●
While charging the flash, blinks and the flash will not fire. Although noise may appear, this is not a
malfunction and is not recorded. It can take up to 10 seconds to charge the flash.
SNAPSHOT Button
POWER Switch
Operation Switch
Menu Screen
MENU Wheel
Lock Button
EN31
1
D
S
5
T
W
W
F
F
R
I
E
S
E
I
I
L
L
E
S
L
L
D
N
A
A
M
T
F
E
E
D
S
S
A
U
–
H
H
N
R
T
M
M
C
U
N
I
A
O
U
A
A
M
C
D
T
D
L
E
R
E
J
R
O
.
MEN
2
U
Flash Brightness Adjustment
When a snapshot ( pg. 18, 19) is taken in the dark the
camcorder fires the flash ( pg. 30) and adjusts the
brightness automatically. You can also adjust the flash
brightness manually. When you find that the snapshots
you took look too bright or too dark, adjust it manually.
1
Set the Operation Switch to “ ” and set the POWER
Switch to “ ” while pressing down the Lock
Button located on the switch, then pull out the
viewfinder or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ”, and press it.
“MANUAL MENU” appears.
4
Rotate the MENU wheel to select “FLASH ADJ.”, and
press it. The parameter appears.
5
To intensify the flash, rotate the MENU wheel towards
“+”. To weaken the flash, rotate it towards “–”.
Adjustment range: –3 to +3.
6
Press the MENU wheel. Rotate it to select
“
1
RETURN” and press it twice to close the Menu
Screen.
NOTE:
When you change the subject you are shooting or the
shooting location, set it back to ±0 as described in step 5
and take a snapshot to check the flash brightness. After
doing this adjust to your desired brightness.
POWER Switch
MENU Wheel
Menu Screen
Operation Switch
Display
Lock Button
32 EN
1
D
S
5
T
W
W
F
F
R
I
E
S
E
I
I
L
L
E
S
L
L
D
N
A
A
M
T
F
E
E
D
S
S
A
U
–
H
H
N
R
T
M
M
C
U
N
I
A
O
U
A
A
M
C
D
T
D
L
E
R
E
J
R
O
.
ME
O
O
N
F
N
U
F
Self-Timer
Once the camcorder is set, the camcorder operator can
become part of the scene in a more natural way, adding
the final touch to a memorable picture.
1
Set the Operation Switch to “ ” and set the POWER
Switch to “ ” while pressing down the Lock
Button located on the switch, then pull out the
viewfinder or open the LCD monitor fully.
•You can tilt the LCD monitor upward to 180° so that
it faces forward and view yourself while self-
recording with the viewfinder pushed back.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ”, and press it.
4
Rotate the MENU wheel to select “SELF-TIMER”, and
press it. The Sub Menu appears. Rotate the MENU
wheel to select “ON”, and press it. Selection is
complete. Rotate the MENU wheel to select
“
1
RETURN”, and press it twice to close the Menu
Screen.
5
To engage the Self-Timer for video recording, press
START/STOP. After 15 seconds, the beep sounds and
video recording starts. To stop Self-Timer recording,
press START/STOP again. The camcorder re-enters
Record-Standby mode.
OR
Press SNAPSHOT. After 15 seconds, the beep sounds
and snapshot recording starts. After that, the
camcorder re-enters Record-Standby mode.
6
To end Self-Timer recording, select “OFF” in step 4 or
set the POWER Switch to “OFF” or set the Operation
Switch to “ ”.
NOTE:
If “BEEP/TALLY” is set to “OFF” (
pg. 27), the beep does
not sound and the tally lamp does not light.
Self-Timer
indication
When START/STOP or SNAPSHOT
is pressed, the tally lamp changes
as shown:
POWER Switch
Display
MENU Wheel
Menu Screen
Blinks quickly
(Self-Timer shooting
starts soon)
Stops blinking
and stays on
(Self-Timer
video record-
ing starts)
Begins blinking
(Self-Timer starts)
After approx. 15 sec.
Turns off
(Self-Timer
snapshot
recording
starts)
4 4
4
4
RECORDING
Advanced Features For Video And D.S.C. (cont.)
START/STOP Button
SNAPSHOT Button
Operation Switch
Lock Button
EN33
1
D
S
5
T
W
W
F
F
R
I
E
S
E
I
I
L
L
E
S
L
L
D
N
A
A
M
T
F
E
E
D
S
S
A
U
–
H
H
N
R
T
M
M
C
U
N
I
A
O
U
A
A
M
C
D
T
D
L
E
R
E
J
R
O
.
ME
O
5
A
N
F
S
N
U
F
I M.
5-Second Recording
Record a vacation or an important event in 5-second clips
to keep the action moving. This function is available only
for video recording.
1
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch and set
the MODE Dial to “VIDEO”, “ ” or “
D
U
A
L
”, then
set the Operation Switch to “ ”. Pull out the
viewfinder fully or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ”, and press it.
“MANUAL MENU” appears.
4
Rotate the MENU wheel to select “5S”, and press it.
The Sub Menu appears.
5
Rotate the MENU wheel to select “5S”, and press it.
•“5S MODE” appears.
6
Press START/STOP. The tally lamp lights and beep
sounds to indicate the start of recording, and after 5
seconds the camcorder enters Record-Standby mode.
•Even if you press START/STOP again within 5
seconds after recording starts, Record-Standby
mode is not engaged.
7
To exit the 5S mode, select “OFF” in step 5.
To Take A Snapshot In The 5-Second Recording Mode . . .
.... instead of pressing START/STOP in step 6, select the
desired Snapshot mode in the Menu Screen, then press
SNAPSHOT. The camcorder records a 5-second still
( pg. 18). When “5S” is set to “ANIM.” ( pg. 28)
this function is not available.
NOTE:
When “5S” is set to “ANIM.” in the Menu Screen the
5-second recording mode is not available. Animation
recording of a few frames only is taken instead (
pg. 28).
Display
Menu Screen
SNAPSHOT Button
POWER Switch
MENU Wheel
START/STOP Button
MODE Dial
Lock Button
Operation Switch
34 EN
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Fade/Wipe Effects
These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next. You can also vary
transitions from scene to scene.
IMPORTANT:
Some Fade/Wipe Effects cannot be used with
certain modes of Programme AE with special
effects (
墌
pg. 36). If an unusable Fade/Wipe
Effect is selected, its indicator blinks or goes
out.
START/STOP Button
MENU Wheel
POWER Switch
FADE/WIPE SELECTION ( , , , ,
, , , , and )
Fade or Wipe works when video recording is started or
when you stop recording.
1
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch and the
MODE Dial to “VIDEO” or “ ”, then set the
Operation Switch to “ ”. Pull out the viewfinder
fully or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ”, then press it.
4
Rotate the MENU wheel to select the desired
function, then press it. Selection is complete.
•The FADER/WIPE Menu disappears and the effect is
reserved. The indicator representing the selected
effect appears.
5
Press START/STOP to activate the Fade-in/out or
Wipe-in/out.
PICTURE WIPE OR DISSOLVE SELECTION
( , , , , , and )
The Picture Wipe or Dissolve works when video recording
is started.
1
Follow steps 1 through 4 above.
2
Engage the Record-Standby mode.
If you select Picture Wipe/Dissolve during
recording . . .
.... press START/STOP when one scene is finished.
The point at which the scene ended is stored in
memory.
If you select Picture Wipe/Dissolve during Record-
Standby mode . . .
.... press START/STOP to start recording and press it
again when one scene is finished. The point at
which the scene ended is stored in memory.
If you select Picture Wipe/Dissolve during Record-
Standby mode after performing a Picture Wipe/
Dissolve . . .
.... the point at which the scene ended is already
stored in memory.
3
If you start recording a new scene within 5 minutes of
the end of the previous recording (without having
turned the camcorder’s power off), the previous scene
wipes out, revealing the new scene.
To Deactivate The Selected Effect . . .
.... select “OFF” in step 4.
NOTES:
●
You can extend the length of a Fade or Wipe
by pressing and holding START/STOP.
●
If the power is turned off after a scene is
finished recording, the stored point is erased,
disabling the Picture Wipe/Dissolve combina-
tion. When this happens, the Picture Wipe/
Dissolve indicator blinks. Also note that
power shuts off automatically if 5 minutes
elapse in the Record-Standby mode.
●
Picture Wipe/Dissolve cannot be used when
the MODE Dial is set to “ ”.
●
All Fade/Wipe Effects cannot be used when
the MODE Dial is set to “
D
U
A
L
”.
●
The sound at the end of the last recorded
scene is not stored.
MODE Dial
Lock Button
Operation Switch
EN35
Fader And Wipe Menu
Menu Effect
Fade in or out with a white screen.
Fade in or out with a black screen.
Fade in to a colour screen from a black and white screen, or fade out
from colour to black and white.
Wipe in on a black screen from the upper right to the lower left
corner, or wipe out from lower left to upper right, leaving a black
screen.
The scene starts in the centre of a black screen and wipes in toward
the corners, or comes in from the corners, gradually wiping out to the
centre.
Wipe in from right to left, or wipe out from left to right.
Wipe in as the two halves of a black screen open to the left and right,
revealing the scene, or wipe out and the black screen reappears from
left and right to cover the scene.
The scene wipes in from the bottom to the top of a black screen, or
wipes out from top to bottom, leaving a black screen.
Wipe in from the centre of a black screen toward the top and bottom,
or wipe out from the top and bottom toward the centre leaving a
black screen.
The new scene gradually appears as the old one gradually disappears.
The new scene wipes in over the previous one from the upper right
corner to the lower left corner.
The next scene gradually wipes in from the centre of the screen
toward the corners, covering the previous scene.
The next scene gradually wipes in over the previous one from right to
left.
The previous scene wipes out from the centre to the right and left, like
a door being pushed open to reveal the next scene.
The new scene wipes in over the last one from the bottom of the
screen to the top.
The new scene wipes in over the previous one from the centre toward
the top and bottom of the screen.
When this function is activated, the camcorder randomly selects the
effect used in scene transition (from , , , , , ,
, , and ). The Picture Wipe/Dissolve function is not
available.
FADER — WHITE
FADER — BLACK
WIPE — CORNER
WIPE — WINDOW
WIPE — SLIDE
WIPE — DOOR
WIPE — SCROLL
WIPE — SHUTTER
FADER — B.W
DISSOLVE
WIPE — CORNER
WIPE — WINDOW
WIPE — SLIDE
RANDOM
WIPE — SHUTTER
WIPE — DOOR
WIPE — SCROLL
36 EN
1/50
1/100
1/250
1/50
1/100
1/250
4
P
1
2
.
S
S
V
S
S
S
A
L
L
I
O
H
H
H
E
O
O
D
F
U
U
U
/
W
W
E
F
T
T
T
E
O
T
T
T
F
E
E
E
F
1
2
E
R
R
R
E
C
C
H
T
O
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Programme AE With Special Effects
1
Set the Operation Switch to “ ”, then set the
POWER Switch to “ ” while pressing down the
Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ”, then press it.
4
Rotate the MENU wheel to select the desired mode,
then press it. Selection is complete.
•The P.AE/EFFECT Menu disappears and the selected
mode is activated. The selected mode indicator
appears.
To Deactivate The Selected Mode . . .
.... select “OFF” in step 4.
NOTE:
Programme AE with special effects can be changed during
recording or during Record-Standby.
MENU Wheel
POWER Switch
TWILIGHT
Makes evening scenes look more natural.
White Balance (墌 pg. 39) is initially set to
, but can be changed to your desired
setting. When Twilight is chosen, the
camcorder automatically adjusts the focus
from approx. 10 m to infinity. From less than
10 m, adjust the focus manually. The flash
does not fire in this mode.
SEPIA*1
Recorded scenes have a brownish tint like
old photos. Combine this with the Cinema
mode for a classic look.
MONOTONE*1
Like classic black and white films, your
footage is shot in B/W. Used together with
the Cinema mode, it enhances the “classic
film” effect.
CLASSIC FILM*2
Gives recorded scenes a strobe effect.
STROBE*2
Your recording looks like a series of
consecutive snapshots.
VIDEO ECHO*3
Adds a “ghost” to the subject, giving your
recording a “fantasy” feeling. Zoom
magnification of over 10X is not available.
SLOW (Slow Shutter)*4
Lights dark subjects or areas even brighter than they
would be under good natural lighting. Use “SLOW”
only in dark areas.
SLOW 1
Slow Shutter raises light sensitivity to allow shooting in
dark environments.
SLOW 2
Slow Shutter raises light sensitivity further to allow
shooting in even darker environments.
NOTES:
●
When using “SLOW”, the image takes on a strobe-like
effect.
●
If the manual focus indicator blinks when “SLOW” is
used, adjust focus manually and use a tripod.
SHUTTER (Variable Shutter Speed)
1/50 – The shutter speed is fixed at 1/50th of a second.
Black bands that usually appear when shooting a TV
screen become narrower.
1/100 – The shutter speed is fixed at 1/100th of a
second. The flickering that occurs when shooting under
a fluorescent light or mercury-vapour lamp is reduced.
1/250 – This setting allows fast-moving images to be
captured one frame at a time, for vivid, stable slow-
motion playback. The faster the shutter speed, the
darker the picture becomes. Use the shutter function
under good lighting conditions.
IMPORTANT:
Some modes of Programme AE with special
effects cannot be used with certain Fade/Wipe
Effects (
墌
pg. 35). If an unusable mode is
selected, its indicator blinks or goes out.
MODE Dial
Display
Menu Screen
*
1
Not available when the MODE Dial is set to “
D
U
A
L
”.
*
2
Available only when the MODE Dial is set to “VIDEO” or “ ”.
*
3
Available only when the MODE Dial is set to “VIDEO” or “ ” (VGA STD/VGA FINE only).
*
4
Available only when the MODE Dial is set to “VIDEO”, “ ” or “ ”.
Lock Button
Operation Switch
EN37
F
S
FS
FF
001 002
003
005
004
EXIT
100-DVC00001
006
SOUND
Digital Sound Effects
12 sound effects (EXPLOSION, SIREN, LAUGHTER, RACE
CAR, DOOR BELL, BUZZER, FANFARE, APPLAUSE,
CHEERS, BOING, SCREAM and JEERS) pre-stored in the
provided MultiMediaCard can be dubbed onto a tape.
SOUND EFFECT MODE SELECTION
1
Load the provided MultiMediaCard (墌 pg. 12) and a
cassette (墌 pg. 10).
2
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch and set
the MODE Dial to “ ”, “VIDEO” or “
D
U
A
L
”. Open
the LCD monitor fully or pull out the viewfinder fully.
3
Press INDEX. The SOUND Index Screen appears.
4
Rotate the MENU wheel to select the desired sound
effect.
•Pressing DIGITAL SOUND starts playback of the
currently selected sound effect so you can check it
without recording it onto the tape. Press DIGITAL
SOUND again to stop the sound effect playback.
5
Press the MENU wheel. The selection is complete.
SOUND EFFECT RECORDING
6
Press DIGITAL SOUND during recording. The
selected sound effect indication with a “ ” mark
appears blinking and the sound effect is recorded
onto the tape.
•The sound effect cannot be heard from the speaker
during recording. Use a headphone set to hear the
sound effect.
To cancel recording the sound effect midway . . .
.... press DIGITAL SOUND again. The camcorder stops
recording the sound effect and the sound effect
indication disappears.
NOTES:
●
Sound effects can also be used for Audio Dubbing
(
墌
pg. 77).
●
Sound effects created on a PC can be transferred to a
MultiMediaCard by copying them into the
MultiMediaCard’s sound folder with the specified file
name. For details, refer to the instruction manual of the
provided software.
INDEX Button
DIGITAL SOUND Button
Display
Selected
(framed in green)
You can download sound data available at
our Web Site (see below for URL) and
transfer them from your PC to the
MultiMediaCard to create more sound
effects.
http://www.jvc-victor.co.jp/english/
download/d-sound/index.html
• Use the PC card adapter CU-V50U or
floppy adapter CU-VFM40U to transfer
sound data from a PC to the
MultiMediaCard.
• Sound data should be copied into the
MultiMediaCard’s DCSD¥100JVCGR
folder.
• The file names should be in numerical
sequence starting from DVC00001.mp3.
If you are using the provided
MultiMediaCard, file names should be
from DVC00013.mp3 since 12 sound
effects are pre-stored as DVC00001.mp3
through DVC00012.mp3.
38 EN
RECORDING
Advanced Features For Video And D.S.C. (cont.)
Exposure Control
Manual exposure adjustment is recommended in the
following situations:
•
When shooting using reverse lighting or when the
background is too bright.
•
When shooting on a reflective natural background
such as at the beach or when skiing.
•
When the background is overly dark or the subject
light.
1
Set the Operation Switch to “ ” and set the
POWER Switch to “ ” while pressing
down the Lock Button located on the switch,
then pull out the viewfinder fully or open the
LCD monitor fully.
2
Press EXPOSURE. “EXP.” and the exposure
control indicator appear.
3
Rotate the MENU wheel towards “+” to
brighten the image, or towards “–” to darken the
image. (maximum ±6)
4
Press the MENU wheel. Exposure adjustment is
complete. “EXP.” goes out.
To Return To Automatic Exposure Control . . .
.... press EXPOSURE or set the Operation Switch to
“ ”.
To Brighten The Subject Quickly . . .
.... press BACKLIGHT. is displayed and the
subject is brightened. If pressed again,
disappears and the brightness returns to the
previous level.
• +3 exposure has the same effect as the
BACKLIGHT Button.
• Using BACKLIGHT may cause the light around the
subject to become too bright and the subject to
become white.
• Backlight compensations is also available when the
Operation Switch is set to “ ”.
EX
0
P.
Iris lock indicator
MENU Wheel
POWER Switch
Iris Lock
Use this function in the following situations:
•
When shooting a moving subject.
•
When the distance to the subject changes (so its
size in the LCD monitor or the viewfinder changes),
such as when the subject is backing away.
•
When shooting on a reflective natural background
such as at the beach or when skiing.
•
When shooting objects under a spotlight.
•
When zooming.
When the subject is close, keep the iris locked. Even
when the subject moves away from you, the image
will not darken or brighten.
Before the following steps, perform steps 1 and 2 of
“Exposure Control”.
3
Adjust zoom so that the subject fills the LCD
monitor or the viewfinder, then press and hold
the MENU wheel for over 2 seconds. The
exposure control indicator and “ ” appear.
Press the MENU wheel. “ ” changes to “ ”
and the iris is locked. “EXP.” goes out.
To Return To Automatic Iris Control . . .
.... press EXPOSURE so that the exposure control
indicator and “ ” disappear. Or, set the
Operation Switch to “ ”.
To Lock The Exposure Control And The Iris . . .
.... after step 2, adjust the exposure rotating the
MENU wheel. Then lock the iris in step 3. For
automatic locking, press EXPOSURE again in
step 2. The iris becomes automatic after about 2
seconds.
Iris
Like the pupil of the human eye, it contracts in well-
lit environments to keep too much light from
entering, and dilates in dim environments to allow in
more light.
Operation Switch
BACKLIGHT Button (
2
)
EXPOSURE Button (
4
/6)
EN39
White Balance Adjustment
A term that refers to the correctness of colour
reproduction under various lighting. If the white
balance is correct, all other colours will be
accurately reproduced.
The white balance is usually adjusted automatically.
However, more advanced camcorder operators
control this function manually to achieve a more
professional colour/tint reproduction.
1
Set the Operation Switch to “ ” and set the
POWER Switch to “ ” while pressing
down the Lock Button located on the switch,
then pull out the viewfinder fully or open the
LCD monitor fully.
2
Press the MENU wheel. The Menu Screen
appears.
3
Rotate the MENU wheel to select “ ”, then
press it. The “W.BALANCE” Menu appears.
4
Rotate the MENU wheel to select “MANUAL”,
and press it. The Menu Screen disappears and
“W.BAL” and the currently selected mode are
displayed. Rotate it to select the desired mode.
“ MAN.” – White balance is set manually.
“ ”–Outdoors on a sunny day.
“ ”– Outdoors on a cloudy day.
“ ”–A video light or similar type of lighting
is used.
5
Press the MENU wheel. Selection is complete.
To Return To Automatic White Balance . . .
.... select “AUTO” in step 4. Or, set the Operation
Switch to “ ”.
NOTE:
White balance cannot be used when Sepia or
Monotone (
墌
pg. 36) is activated.
Manual White Balance Operation
Perform Manual White Balance when shooting under
various types of lighting.
1
Follow steps 1 through 4 of the white balance
adjustment, and select “ MAN.”.
2
Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that
the white paper fills the screen.
3
Press the MENU wheel until begins
blinking.
When the setting is completed, stops
blinking.
4
Press the MENU wheel. Only the Manual White
Balance indicator is displayed.
White paper
POWER Switch
MENU Wheel
To Change The Tint For Recording . . .
.... in step 2, substitute coloured paper for white.
The white balance is adjusted based on the
colour, changing the tint. Red paper = deeper
green; blue paper = orange; yellow paper =
deeper purple.
NOTES:
●
In step 2, it may be difficult to focus on the white
paper. In such a case, adjust focus manually
(
墌
pg. 25).
●
A subject can be shot under various types of
lighting conditions indoors (natural, flourescent,
candlelight, etc.). Because the colour temperature
is different depending on the light source, the
subject tint will differ depending on the white
balance settings. Use this function for a more
natural result.
●
Once you adjust white balance manually, the
setting is retained even if the power is turned off or
the battery removed.
Operation Switch
Lock Button
40 EN
F
O
C
U
S
B
A
C
K
L
I
G
H
T
E
X
P
O
S
U
R
E
PLAYBACK
Basic Playback For Video
Rewind Button (
2
)
Fast-Forward Button (
3
)
Play/Pause Button (
4
/6)
Stop Button (5)
1
Load a tape (墌 pg. 10).
2
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch. To start
playback, press
4
/6.
•To stop playback, press 5.
•Press
2
to rewind, or
3
to fast-forward the tape
during Stop mode.
To Control The Speaker Volume . . .
.... slide the Power Zoom Lever (VOL.) towards “+” to
turn up the volume, or towards “–” to turn down the
volume.
NOTES:
●
If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off automati-
cally. To turn on again, set the POWER Switch to “OFF”,
then to “
”.
●
The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (
墌
pg. 56).
●
You can also view the playback picture on the LCD monitor
with it flipped over and pushed against the camera body.
●
LCD monitor/viewfinder indications:
•
When power is supplied from a battery: the “ ”
battery pack remaining power indicator is displayed.
When power is supplied through the DC cord: “
”
does not appear.
•
During Stop mode, none of the indications are displayed.
●
When a cable is connected to the AV OUT connector, the
sound is not heard from the speaker.
Power Zoom
Lever (VOL.)
Speaker
MENU Wheel
Still Playback:
Pauses during playback.
1) Press
4
/6 during playback.
2) To resume normal playback, press
4
/6 again.
●
If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
●
When
4
/6
is pressed, the image may not pause immediately while the camcorder stabilises the still
image.
Shuttle Search:
Allows high-speed search in either direction.
1) Press
3
for forward or
2
for reverse search during playback.
2) To resume normal playback, press
4
/6.
●
During playback, press and hold
2
or
3
. The search continues as long as you hold the button.
Once you release it, normal playback resumes.
●
A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
Frame-By-Frame Playback:
Allows frame-by-frame search.
1) Engage Still Playback.
2) Rotate the MENU wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse
Frame-By-Frame Playback during Still Playback.
䡲 To resume normal playback, press
4
/6.
●
You can also use the provided remote control for Frame-By-Frame Playback (
墌
pg. 68).
Slow-Motion Playback, Playback Zoom and Playback Special Effects
Available only with the remote control (provided) (墌 pg. 68, 69).
POWER Switch
Lock Button
EN41
1
S
1
S
R
B
A
R
O
2
Y
E
L
V
E
U
B
N
C
A
/
V
T
N
I
C
N
S
I
U
D
T
H
M
K
–
D
R
R
O
C
V
E
N
M
M
O
D
S
O
I
O
O
O
E
R
P
D
D
D
C
Y
E
M
E
E
H
O
EN
S
S
S
U
T
O
O
E
U
U
R
N
N
E
D
D
O
L
R
1
O
D
T
R
N
A
I
D
E
T
M
I
T
S
E
E
S
U
C
/
P
R
R
T
C
L
N
E
I
O
A
E
M
D
Y
N
E
E
M
E
O
O
N
F
N
U
F
Using Menus For Detailed Adjustment
The following procedure applies to all except Synchro
Comp (墌
pg. 74, 75).
1
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select the desired function
icon, and press it. The selected function menu
appears.
4
Rotate the MENU wheel to select the desired
function, and press it to display the Sub Menu.
5
Rotate the MENU wheel to select the desired
parameter and press it. Selection is complete.
6
Rotate the MENU wheel to select “
1
RETURN” and
press it twice to close the Menu Screen.
Display
POWER Switch
MENU Wheel
墌 pg. 42.
墌 pg. 42.
墌 pg. 75.
Allows you to set the video recording
mode (SP or LP) depending on your
preference (
墌 pg. 11). It is recom-
mended you use “REC MODE” in the
“VIDEO MENU” when using this
camcorder as a recorder during digital
dubbing (GR-DVX10 only 墌 pg. 61, 63).
Helps find a blank portion of tape when
you want to record from the middle of a
tape (墌 pg. 43).
ON:
Enables dubbing of images recorded
on a tape to a MultiMediaCard (
墌
pg. 65).
OFF: Enables snapshots to be taken
during video playback.
IN: Enables audio/video signal input
from the AV and S-VIDEO connectors
(
墌 pg. 61).
OUT: Enables audio/video signal output
to a TV, VCR, etc. via the AV and S-
VIDEO connectors (墌 pg. 56 ,60).
Makes the camcorder’s indications appear/
disappear from the connected TV screen.
Makes the date/time appear/disappear
on the camcorder.
Makes the time code appear/disappear
on the camcorder.
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
BLANK SRCH
COPY
AV/S-VIDEO
(GR-DVX10
only)
ON SCREEN*
DATE/TIME*
TIME CODE*
Menu Screen
START/STOP Button
* Each setting is linked with “DISPLAY MENU”,
which appears when the Operation Switch is
set to “ ” (墌 pg. 29). The parameters are
the same as in the description on pg. 29.
NOTES:
●
It is also possible to change the ON SCREEN
settings by pressing DISPLAY on the remote
control (provided).
●
“REC MODE” can be set when the Operation
Switch is set to “ ” (
墌
pg. 11, 27).
●
If “ON SCREEN” is set to “SIMPLE”, it keeps
the camcorder’s display (except the date,
time and time code) from appearing on the
connected TV. It also makes the playback
sound mode and tape speed disappear on the
camcorder.
VIDEO MENU
DISPLAY MENU
Lock Button
PLAYBACK
Advanced Features For Video
GR-DVX10 only
CONTINUED ON NEXT PAGE
42 EN
12
BIT/SOUND
1
SP
4
25. 1
1
2
7
.
:
0
3
0
0
TC
12
:
34
:
24
Playback Sound
During playback, the camcorder detects the sound mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany your playback picture. According to the menu access
explanation on pg. 41, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the
desired parameter.
Minutes
Seconds
Frames*
*25 frames = 1 second
NOTES:
●
The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions,
“12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)
●
The camcorder cannot detect the sound mode in which the recording was made during fast-forward or
rewind. During playback the sound mode is displayed in the upper left corner.
SOUND MODE
12BIT MODE
: Factory-preset
STEREO
SOUND L
SOUND R
SOUND 1
SOUND 2
MIX
Sound is output on both “L” and “R” channels in stereo.
Sound from the “L” channel is output in stereo.
Sound from the “R” channel is output in stereo.
Original sound is output on both “L” and “R” channels in stereo.
Dubbed sound is output on both “L” and “R” channels in stereo.
Original and dubbed sounds are combined and output in stereo on
both “L” and “R” channels in stereo.
ON SCREEN setting:
For playback sound, tape
speed and tape running.
DATE/TIME setting:
For date/time.
TIME CODE setting:
For time code.
Display
PLAYBACK
Advanced Features For Video (cont.)
EN43
1
S
1
S
R
B
A
R
O
2
Y
E
L
V
E
U
B
N
C
A
/
V
T
N
I
C
N
S
I
U
D
T
H
M
K
–
D
R
R
O
C
V
E
N
M
M
O
D
S
O
I
O
O
O
E
R
P
D
D
D
C
Y
E
M
E
E
H
O
EN
S
S
S
C
E
U
T
O
O
A
X
E
U
U
N
E
R
N
N
C
C
E
D
D
E
U
O
L
T
L
R
E
BLANK SEARCH
44
POWER Switch
MENU Wheel
Blank Search
Helps you find where you should start recording in the
middle of a tape to avoid time code interruption (墌 pg. 21).
1
Load a tape (墌 pg. 10) and set the POWER Switch to
“ ” while pressing down the Lock Button
located on the switch.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ”, then press it.
“VIDEO MENU” appears.
4
Rotate the MENU wheel to select “BLANK SRCH”,
then press it. The Sub Menu appears.
5
Rotate the MENU wheel to select “EXECUTE”, then
press it.
•“BLANK SEARCH” appears blinking and the
camcorder automatically starts reverse or forward
shuttle search, then stops at the spot which is about
3 seconds of tape before the beginning of the
detected blank portion.
To cancel Blank Search midway . . .
.... press 5.
NOTES:
●
In step 5, if the current position is at a blank portion the
camcorder searches in the reverse direction, and if the
current position is at a recorded portion the camcorder
searches in the forward direction.
●
Blank Search does not work if “HEAD CLEANING
REQUIRED. USE CLEANING CASSETTE” has appeared
with the tape.
●
If the beginning or end of the tape is reached during
Blank Search, the camcorder stops automatically.
●
A blank portion which is shorter than 5 seconds of tape
cannot be detected.
●
The detected blank portion may be located between
recorded scenes. Before you start recording, make sure
there is no recorded scene after the blank portion.
Lock Button
Display
Menu Screen
Stop Button (5)
GR-DVX10 only
44 EN
E
-
M
R
A
E
I
C
L
OR
C
D
L
I
I
N
P
G
E
-
M
R
C
A
E
O
I
C
M
L
O
P
R
L
C
D
E
L
I
T
I
N
E
P
G
D
E
-
M
R
A
E
I
C
L
OR
C
D
L
I
I
N
P
G
After approx. 20 seconds or
when START/STOP is pressed
POWER Switch
Playback Screen
START/STOP Button
PLAYBACK
Advanced Features For Video (cont.)
E-Mail Clip Recording
You can make video clips from recorded video footage
and store them in a MultiMediaCard as files which can be
conveniently sent via e-mail.
1
Load a MultiMediaCard (墌 pg. 12) and cassette
(墌 pg. 10). Set the POWER Switch to “ ” while
pressing down the Lock Button located on the switch.
2
Press
4
/6 to start video playback.
3
Press E-MAIL CLIP REC. “E-MAIL CLIP STAND-BY”
appears and the camcorder enters the E-Mail Clip
Record-Standby mode.
4
Press START/STOP. “E-MAIL CLIP RECORDING ”
appears.
•The camcorder stops E-Mail Clip Recording
automatically after approx. 20 seconds, then starts
storing the recorded video data in the
MultiMediaCard which takes approx. 100 seconds
additionally. “COMPLETED” appears when it is
complete.
To cancel E-Mail Clip Recording . . .
.... after step 3, press E-MAIL CLIP REC again or press 5
to stop video playback.
To view video clips stored in a MultiMediaCard . . .
.... the video clip selected in the E-CLIP Index Screen
(墌 pg. 47, Index Playback) can be viewed in the LCD
monitor or viewfinder; video clips cannot be displayed
on a connected TV.
NOTES:
●
Playback operation cannot be performed during E-Mail
Clip Recording.
●
If you press START/STOP while E-Mail Clip Recording is
in progress, only the portion which is recorded before
START/STOP is pressed will be stored in the
MultiMediaCard.
●
Also, if the end of the tape is reached during E-Mail Clip
Recording, that portion will be automatically stored in
the MultiMediaCard.
●
If the end of the tape is reached in step 3, the E-Mail Clip
Record-Standby mode will be automatically cancelled.
●
Refer to the instruction manual of the provided software,
CardNavigator, Video Player and JVC Video Decoder.
●
Video noise may appear while viewing video clips in the
LCD monitor or viewfinder, however, this noise is not
present in the actual video clips stored in the
MultiMediaCard.
Storing is complete
E-MAIL CLIP REC
Button
Display
Play/Pause Button (
4
/6)
Stop Button (5)
Lock Button
EN45
IM
1
A
3
G
/
E
24
100
–
0013
IM
1
A
0
G
/
E
24
100
–
0010
IM
1
A
1
G
/
E
24
100
–
0011
IM
1
A
2
G
/
E
24
100
–
0012
F
O
C
U
S
B
A
C
K
L
I
G
H
T
E
X
P
O
S
U
R
E
POWER Switch
Normal Playback
Images shot with the camcorder are automatically
numbered, then stored in numerical order in the
MultiMediaCard. You can view the stored images, one at a
time, much like flipping through a photo album.
1
Load a MultiMediaCard (墌 pg. 12).
2
Set the POWER Switch to “
M
E
M
O
R
Y
P
L
A
Y
” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
•A stored image is displayed.
3
Press
3
to display the next image.
Press
2
to display the previous image.
Auto Playback
You can run through all the images stored in memory
automatically.
1
Perform steps 1 and 2 above.
2
Press
4
/6.
•If you press
2
during Auto Playback, images are
displayed in descending order.
•If you press
3
during Auto Playback, images are
displayed in ascending order.
3
To end Auto Playback, press 5.
NOTES:
●
Even if you shoot a new image after playing back a low-
numbered one, this will not overwrite an existing image,
because new images are automatically stored after the
last-recorded one.
●
Image number, directory and file names appear if “ON
SCREEN” is set to either “LCD” or “LCD/TV” in the
Menu Screen (
墌
pg. 29).
PLAYBACK
Basic Playback For D.S.C.
[For Normal Playback]
To display the next image
Display
[For Auto Playback]
Stop Button (5)
To display the
previous image
Image number
Displays the index number of the image file (
墌 pg. 46, 47).
Total number of images
Displays the total number of stored images.
Rewind Button (
2
)
Fast-Forward Button (
3
)
Directory and File names
Displays the directory and file names (
墌 pg. 46, 47).
Play Button (
4
/6)
Lock Button
46 EN
001 F 002 S
003 S
005 F
004 F
EXIT
100-DVC00003 VGA
006 F
IMAGE
Index number Selected file
Picture Quality/Size
mode: Appears only
when displaying still
images
Protect icon
POWER Switch
Index Screen
The files you stored can be displayed together with their
index information. Convenient for checking files stored
beforehand, the Index Screen also shows the Picture
Quality/Size mode, directory and file names as well as
which files are protected against accidental erasure.
100-DVC00003: Directory and File names
Shows that the selected file is in a directory called “100”
and its file name is “DVC00003”.
Each time shooting takes place, a file name is made using
a number which is larger by one than the largest number
of the file names which are in use. If the file name reaches
DVC09999, a new directory will be made and the file
name will start again from DVC00001.
In the playback screen (墌 pg. 45), the directory and only
the last four digits of the file name are displayed.
001: Index number
Index numbers are marked from 001. For example, when
10 files are stored (index number: 001 to 010), if three files
with index numbers 002, 004 and 006 are deleted from
memory, the remaining files are automatically moved up
to fill any gaps in the numerical sequence. Therefore, the
number of remaining files is 7, and the new index
numbers range from 001 to 007.
F/S/XGA/VGA: Picture Quality/Size mode
Displays the Picture Quality/Size mode of the stored
image. There are 4 modes available: XGA FINE, XGA STD,
VGA FINE and VGA STD (in order of quality) (墌 pg. 13).
: Protect icon
When a file is protected against its accidental erasure, a
padlock mark appears next to the index number, and that
file cannot be deleted.
Selected File
A file is framed in green when it is selected. Rotate the
MENU wheel to move the green frame to the desired file.
MENU Wheel
Directory and
File names
PLAYBACK
Basic Playback For D.S.C. (cont.)
Lock Button
Type of file
EN47
F
S
FS
FF
001 002
003
005
004
EXIT
100-DVC00001 VGA
006
IMAGE
F
S
FS
FF
001 002
003
005
004
EXIT
100-DVC00001
006
E-CLIP
F
S
FS
FF
001 002
003
005
004
EXIT
100-DVC00001
006
SOUND
Playback Screen
Index Playback
You can view or listen to the files (still images, video clips,
or sound effects) stored in memory six at a time. Use this
mode when looking for a file you wish to view or hear.
1
Perform steps 1 and 2 of “Normal Playback” on
pg. 45.
2
To access the Index Screen, press INDEX once.
If you press INDEX twice . . .
the Index Screen for E-Mail Clip Rec (墌 pg. 44)
appears, if a video clip has been stored. (If there is no
video clip, this will be skipped.)
If you press INDEX three times . . .
the Index Screen for Digital Sound Effect (墌 pg. 37)
appears. (If there is no sound effect, the display will
return to the still image Index Screen.)
3
Rotate the MENU wheel to move the green frame to
the desired file and press it. The file selected in the
Index Screen is displayed or played back.
Still image
Video clip
Sound effect
INDEX Button
Display
48 EN
1
I
I
S
S
E
E
F
D
F
R
M
M
O
O
–
–
R
P
O
E
A
A
U
U
C
C
A
O
R
M
T
G
G
N
N
L
L
M
F
M
E
U
E
E
D
D
I
I
E
A
M
R
P
P
T
O
N
P
D
P
D
D
R
R
E
R
E
P
D
E
Y
O
L
O
L
R
E
L
.
.
.
.
O
L
.
ENUM
.
.
001 F 002 S
003 S
005 F
004 F 006 F
EXIT PROTECT
001 F 002 S
003 S
005 F
004 F 006 F
EXIT PROTECT
Display
POWER Switch
MENU Wheel
If Protection is removed
PROTECT Index
Screen
Normal playback
Padlock mark
Normal playback
Protecting Files
The Protect mode helps prevent the accidental erasure of
files. When a padlock mark is displayed next to the index
number, that file cannot be deleted.
1
Set the POWER Switch to “
M
E
M
O
R
Y
P
L
A
Y
” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
•A stored file is displayed.
2
Press the MENU wheel. The Menu Screen appears.
Rotate it to select “ ” and press it. “MEMORY
MENU” appears.
3
By rotating the MENU wheel...
... select “IMAGE PRO.” to access the PROTECT
Index Screen.
... select “E-CLIP PRO.” to access the E-Clip Rec
PROTECT Index Screen.
... select “SOUND PRO.” to access the Sound Effect
PROTECT Index Screen.
Then press the MENU wheel.
TO PROTECT A FILE
Before doing the following, perform steps 1 through 3
above.
4
Rotate the MENU wheel to move the green frame to
the desired file and press it. A “ ” padlock mark
appears on the selected file.
Repeat this procedure for all files you do not wish to
delete by accident.
5
Rotate the MENU wheel upward to select “EXIT” and
press it. The normal playback screen appears.
NOTE:
When the memory is initialised or corrupted, even
protected files are deleted. If you do not want to lose
important files, transfer them to a PC and save them.
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3
above.
4
Rotate the MENU wheel to move the green frame to
the desired file and press it. The “ ” padlock mark
located above the file disappears and the file is no
longer protected.
Repeat this procedure for all files from which you
wish to remove protection.
5
Rotate the MENU wheel upward to select “EXIT” and
press it. The normal playback screen appears.
PLAYBACK
Advanced Features For D.S.C.
Menu Screen
Lock Button
EN49
001 F 002 S
003 S
005 F
004 F 006 F
DELETE
EXIT
C
E
A
X
N
E
M
C
C
E
E
U
M
L
T
O
E
RY MENU
Deleting Files
Previously stored files can be deleted either one at a time
or all at once.
1
Set the POWER Switch to “
M
E
M
O
R
Y
P
L
A
Y
” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
•A stored file is displayed.
2
Press the MENU wheel. The Menu Screen appears.
Rotate it to select “ ” and press it. “MEMORY
MENU” appears.
3
By rotating the MENU wheel...
... select “IMAGE DEL.” to delete images.
... select “E-CLIP DEL.” to delete E-clip recording
files.
... select “SOUND DEL.” to delete sound effects.
Then press the MENU wheel. The Sub Menu appears.
TO SELECT A FILE BY BROWSING FILES
STORED IN MEMORY
Before doing the following, perform steps 1 through 3 above.
4
Rotate the MENU wheel to select “SELECT” and press
it. The DELETE Index Screen appears.
5
Rotate the MENU wheel to move the green frame to the
desired file that you wish to delete and press it. An “ ”
appears above the selected file.
Repeat this procedure for all files that you wish to delete.
To deselect a file, press the MENU wheel again. The “ ”
disappears.
6
Rotate the MENU wheel upward to select “EXIT” and
press it. The Deletion Confirmation Screen appears.
7
Rotate the MENU wheel to select “EXECUTE” and
press it. The selected files are deleted and the normal
playback screen appears.
•To cancel deletion, rotate the MENU wheel to select
“CANCEL” and press it.
TO DELETE ALL FILES
Before doing the following, perform steps 1 through 3 above.
4
Rotate the MENU wheel to select “ALL” and press it.
The Deletion Confirmation Screen appears.
5
Rotate the MENU wheel to select “EXECUTE” and
press it. All the files are deleted.
•To cancel deletion, rotate the MENU wheel to select
“CANCEL” and press it.
NOTES:
●
Protected files (
墌
pg. 48) cannot be deleted with the
above operation. To delete them, remove protection first.
●
Once files are deleted, they cannot be restored. Check
files before deleting.
POWER Switch
MENU Wheel
Display
DELETE Index
Screen
CAUTION:
Do not remove the MultiMediaCard or
perform any other operation (such as
turning off the camcorder) during deletion.
Also, be sure to use the provided AC Power
Adapter/Charger, as the MultiMediaCard
may be corrupted if the battery becomes
exhausted during deletion. If the
MultiMediaCard becomes corrupted,
initialise it. (墌 pg. 50)
Deletion
Confirmation
Screen
Lock Button
50 EN
PLAYBACK
Advanced Features For D.S.C. (cont.)
1
I
I
S
S
E
E
F
D
F
R
M
M
O
O
–
–
R
P
O
E
A
A
U
U
C
C
A
O
R
M
T
G
G
N
N
L
L
M
F
M
E
U
E
E
D
D
I
I
E
A
M
R
P
P
T
O
N
P
D
P
D
D
R
R
E
R
E
P
D
E
Y
O
L
O
L
R
E
L
.
.
.
.
O
L
.
ENUM
.
.
E
M
X
E
M
I
S
M
A
S
O
C
E
O
Y
T
U
A
X
R
I
N
N
E
Y
E
N
D
C
C
R
G
E
U
E
S
P
F
E
N
E
R
F
U
E
E
–
C
S
T
E
S
T
M
A
E
L
T
MENU Wheel
POWER Switch
Display
Initialising A MultiMediaCard
You can initialise a MultiMediaCard anytime.
After initialising, all images and data stored in the
MultiMediaCard, including those which have been
protected, are cleared.
1
Set the POWER Switch to “
M
E
M
O
R
Y
P
L
A
Y
” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ” and press it.
“MEMORY MENU” appears.
4
Rotate the MENU wheel to select “FORMAT” and
press it. The Confirmation Screen appears.
5
Rotate the MENU wheel to select “EXECUTE” and
press it. The MultiMediaCard is initialised. When
initialisation is finished, “NO STORED DATA”
appears.
•To cancel initialisation, rotate the MENU wheel to
select “CANCEL” and press it.
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Power
Adapter/Charger, as the MultiMediaCard may be
corrupted if the battery becomes exhausted
during initialisation. If MultiMediaCard becomes
corrupted initialise it.
Menu Screen
Lock Button
Confirmation
Screen
EN51
EXIT
001 002
003
005
004 006
EXIT
FRAME 5
FRAME
Superimposing A Print Frame
A selection of print frames are stored in the camcorder. A
frame can be superimposed over a still image.
1
Play back an image stored in the MultiMediaCard.
2
Press PRINT FRAME. The Print Frame Index Screen
appears.
3
Rotate the MENU wheel to move the green frame to
the desired print frame and press it. Selection is
complete. The selected print frame is superimposed
over the still image.
To Make The Print Frame Disappear . . .
.... press PRINT FRAME.
NOTES:
●
A print frame created on a PC can be transferred to a
MultiMediaCard using the provided software. Trans-
ferred print frames are displayed from print frame index
number 007, and they can be used together with the
print frames in the camcorder’s memory. For details on
creating/transferring print frames, refer to the software
instructions.
●
Depending on the images you play back, the print frame
outline may become grainy or vague.
MENU Wheel
Print Frame
Index Screen
PRINT FRAME Button
Display
52 EN
013
F
014
F
015
F
017
F
016
F
018
F
DELETE
EXIT
C
E
A
X
N
E
M
C
C
E
E
U
M
L
T
O
E
RY MENU
Print Frame Deletion
A print frame created on a PC can be transferred to a
MultiMediaCard using the provided software. Print frames
that have been transferred to a MultiMediaCard can be
deleted when they are no longer needed.
There are 2 ways of deleting previously created print
frames: by browsing through print frames individually or
by deleting them all at once.
TO SELECT A PRINT FRAME BY BROWSING
PRINT FRAMES STORED IN MEMORY
1
Set the POWER Switch to “
M
E
M
O
R
Y
P
L
A
Y
” while pressing
down the Lock Button located on the switch.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ” and press it.
“MEMORY MENU” appears.
4
Rotate the MENU wheel to select “FRAME DEL.” and
press it. The Sub Menu appears.
5
Rotate the MENU wheel to select “SELECT” and press
it. The DELETE Index Screen appears.
6
Rotate the MENU wheel to move the green frame to
the desired print frame that you wish to delete and
press it. An “ ” appears above the selected print
frame.
Repeat this procedure for all print frames that you
wish to delete.
To deselect a print frame, press the MENU wheel
again. The “ ” disappears.
7
Rotate the MENU wheel upward to select “EXIT” and
press it. The Deletion Confirmation Screen appears.
8
Rotate the MENU wheel to select “EXECUTE” and
press it. The selected print frames are deleted and the
normal playback screen appears.
•To cancel deletion, rotate the MENU wheel to select
“CANCEL” and press it.
NOTES:
●
If print frames created on a PC have not been transferred
to a MultiMediaCard, it is not possible to delete them
using these steps.
●
The print frames in the camcorder’s memory cannot be
deleted.
Display
POWER Switch
DELETE Index
Screen
Deletion
Confirmation
Screen
CAUTION:
Do not remove the MultiMediaCard or
perform any other operation (such as
turning off the camcorder) during deletion.
Also, be sure to use the provided AC Power
Adapter/Charger, as the MultiMediaCard
may be corrupted if the battery becomes
exhausted during deletion. If the
MultiMediaCard becomes corrupted,
initialise it. (墌 pg. 50)
MENU Wheel
PLAYBACK
Advanced Features For D.S.C. (cont.)
Lock Button
EN53
1
I
I
S
S
E
E
F
D
F
R
M
M
O
O
–
–
R
P
O
E
A
A
U
U
C
C
A
O
R
M
T
G
G
N
N
L
L
M
F
M
E
U
E
E
D
D
I
I
E
A
M
R
P
P
T
O
N
P
D
P
D
D
R
R
E
R
E
P
D
E
Y
O
L
O
L
R
E
L
.
.
.
.
O
L
.
M
.
.
EN
C
A
S
U
A
L
E
N
L
L
C
E
E
C
L
T
C
E
A
X
N
E
M
C
C
E
E
U
M
L
T
O
E
RY MENU
TO DELETE ALL PRINT FRAMES
1
Perform steps 1 through 4 on pag. 52.
2
Rotate the MENU wheel to select “ALL” and press it.
The Deletion Confirmation Screen appears.
3
Rotate the MENU wheel to select “EXECUTE” and
press it. All the print frames are deleted.
•To cancel deletion, rotate the MENU wheel to select
“CANCEL” and press it.
POWER Switch
Menu Screen
Deletion
Confirmation
Screen
MENU Wheel
Display
Lock Button
54 EN
1
I
I
S
S
E
E
F
D
F
R
M
M
O
O
–
–
R
P
O
E
A
A
U
U
C
C
A
O
R
M
T
G
G
N
N
L
L
M
F
M
E
U
E
E
D
D
I
I
E
A
M
R
P
P
T
O
N
P
D
P
D
D
R
R
E
R
E
P
D
E
Y
O
L
O
L
R
E
L
.
.
.
.
O
L
.
M
.
.
EN
S
A
R
U
E
L
E
L
L
S
E
E
C
T
T
C
E
A
X
N
E
M
C
C
E
E
U
M
L
T
O
E
RY MENU
Setting Print Information (DPOF Setting)
This camcorder is compatible with the DPOF (Digital Print
Order Format) standard in order to support future systems
such as automatic printing, which records information
about the still images you wish to print (such as the
number of prints to make). There are 2 print information
settings available: “To print all still images (one print for
each)” explained below and “To print by selecting still
images and no. of prints” ( 墌
pg. 55).
TO PRINT ALL STILL IMAGES (ONE PRINT
FOR EACH)
1
Set the POWER Switch to “
M
E
M
O
R
Y
P
L
A
Y
” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ ” and press it.
“MEMORY MENU” appears.
4
Rotate the MENU wheel to select “DPOF” and press
it. The Sub Menu appears.
5
Rotate the MENU wheel to select “ALL” and press it.
Selection is complete. The Confirmation Screen
appears.
6
Rotate the MENU wheel to select “EXECUTE” and
press it. The normal playback screen appears.
•To cancel selection, rotate the MENU wheel to
select “CANCEL” and press it.
To Reset The Setting . . .
.... select “RESET” in step 5. The setting is reset to 0 for all
still images.
MENU Wheel
Menu Screen
PLAYBACK
Advanced Features For D.S.C. (cont.)
Display
POWER Switch
Lock Button
Confirmation
Screen
EN55
019 00
00
00
00
03
00
020
021
023
022
EXIT
100-DVC00021 VGA
024
DPOF
C
E
A
X
N
E
M
C
C
E
E
U
M
L
T
O
E
RY MENU
TO PRINT BY SELECTING STILL IMAGES
AND NO. OF PRINTS
1
Perform steps 1 through 4 on pg. 54.
2
Rotate the MENU wheel to selsect “SELECT” and
press it. Selection is complete. The DPOF Screen
appears.
3
Rotate the MENU wheel to move the green frame to
the image you wish to print and press it.
4
Select the number of prints by rotating the MENU
wheel towards “+” to increase the number, or
towards “–” to decrease the number and press it.
Repeat steps 3 and 4 for the desired number of prints.
•The number of prints can be set up to 15.
•To correct the number of prints, select the image
again and change the number.
5
Rotate the MENU wheel upward to select “EXIT” and
press it. Selection is complete. The Confirmation
Screen appears.
6
Rotate the MENU wheel to select “EXECUTE” and
press it. The normal playback screen appears.
•To cancel selection, rotate the MENU wheel to
select “CANCEL” and press it.
To Reset The No. Of Prints . . .
.... select “RESET” in step 5 on pg. 54. The number of
prints is reset to 0 for all still images.
MENU Wheel
DPOF Screen
NOTES:
●
If you load a MultiMediaCard already set as shown
above in a printer compatible with DPOF, it will make
prints of the selected still images automatically.
●
To print images recorded on a tape, first dub them to a
MultiMediaCard (
墌
pg. 65).
CAUTION:
While performing the above, never disconnect power,
as this may cause the memory to be corrupted. For
safety, all buttons including the POWER Switch are
disabled in step 5.
Display
Confirmation
Screen
POWER Switch
Lock Button
56 EN
CONNECTIONS
Basic Connections
1 2
These are some basic types of connections. When making the connections, refer also to your VCR and TV
instruction manuals.
A. Connection to a TV or VCR equipped with a SCART connector compatible only with regular video
signal
B. Connection to a TV or VCR equipped with a SCART connector compatible with Y/C signal
TV
VCR
Yellow to VIDEO
Audio/Video cable
[mini-plug to RCA plug]
(provided)
Red to AUDIO R**
White to AUDIO L**
Red to AUDIO R**
White to AUDIO L**
White to AUDIO L**
To -IN
To
AV OUT
Cable Adapter
(provided)
Set to CVBS
Red to AUDIO R**
Yellow to VIDEO*
Yellow to VIDEO*
To S
S-Video cable
(optional)
Audio/Video cable
[RCA plug to RCA
plug] (optional)
Cable
Adapter
(provided)
Set to Y/C
TV
VCR
Docking Station Attachment
1 Align the direction stud and screw on
the Docking Station with the stud hole
and tripod mounting socket on the
camcorder.
2 Tighten the screw.
• When removing the camcorder, loosen
the screw and detach the camcorder.
Connector
cover*
* When connecting the cables, open this cover.
** The Audio cable is not required for watching still images with the POWER Switch set to “
MEMORY
PLAY
”.
To TV or VCR
To TV or VCR
* Connect when an S-Video cable is not used.
** The Audio cable is not required for watching still images with the POWER Switch set to “
M
E
M
O
R
Y
P
L
A
Y
”.
Tripod
mouting
socket
Stud hole
Stud
Screw
EN57
NOTES:
●
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack (
墌
pg. 7).
●
When connecting the cables, make sure to
connect the ends with a core filter to the
camcorder. The core filter reduces interference.
●
To monitor the picture and sound from the
camcorder without inserting a tape or
MultiMediaCard, set the camcorder’s POWER
Switch to “ ”, then set your TV to the
appropriate input mode.
●
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
●
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.
●
While the Audio/Video cable is connected to the
AV OUT connector, sound cannot be heard from
the speaker.
●
Set the video out select switch of the cable adapter
as required:
Y/C : When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video
cable.
CVBS : When connecting to a TV or VCR which
does not accept Y/C signals and uses an
audio/video cable.
C.
Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors
Audio/Video cable
[RCA plug to RCA
plug] (optional)
Red to
AUDIO R IN*
TV
VCR
To S-VIDEO IN
Yellow to VIDEO IN
Red to AUDIO R*
White to AUDIO L*
Yellow to VIDEO
To S
S-Video cable
(optional)
To TV or VCR
pp
pp
p
( )
[[
[[
[
When an S-Video
cable is not used.
* The Audio cable is not required for watching still images with the POWER Switch set to “
MEMORY
PLAY
”.
White to
AUDIO L IN*
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration (墌 pg. 56, 57).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF”
in the Menu Screen (墌 pg. 41).
• Time Code
.... set “TIME CODE” to “ON” or “OFF” in the
Menu Screen (墌
pg. 41).
• Playback Sound Mode, Tape Speed And Tape
Running Displays for video playback
Or
Directory/File Names and Image Number/Total
Number of Images for D.S.C. Playback
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the
Menu Screen (墌 pg. 41).
Or, press DISPLAY on the remote control.
58 EN
CONNECTIONS
Advanced Connections
Connection To A Personal
Computer
This camcorder can transfer still images to a PC by using
the provided software when connected as shown in the
illustration. It is also possible to transfer still images to a PC
with a DV connector-equipped capture board installed.
1
Make sure the camcorder and PC are turned off.
2
Connect the camcorder or Docking Station to your
PC using the appropriate cable as shown in the
illustration.
•To attach the camcorder to Docking Station, refer to
“Docking Station Attachment” on pg. 56.
3
Turn the camcorder’s POWER Switch to “ ”
while pressing down the Lock Button located on the
switch and turn on the PC.
NOTES:
●
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(
墌
pg. 7).
●
Never connect the PC connection cable and the DV
cable simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.
●
The date/time information cannot be captured into the
PC.
●
Refer to the instruction manuals of the provided
Software.
●
Also refer to the manufacturer’s instruction manual for
the DV connector-equipped capture board.
To DV
OUT
To
RS-232C
DV cable*
To DV
connector
PC
connection
cable
(provided)
To P C
POWER Switch
PC with DV
connector-equipped
capture board
PC
Core filter
Core filter
Open the
connector
cover.
Lock Button
* Use the DV cable provided with the capture
board.
EN59
Video unit equipped
with a DV input
connector
Connection To A Video Unit Equipped With
A DV Connector
Connection to the GV-DT3 Digital Printer (optional) allows
you to print out images or transfer them to a PC. It is also
possible to copy recorded scenes from the camcorder onto
another video unit equipped with a DV connector. This
function is called Digital Dubbing (墌 pg. 62), which
offers virtually no image or sound deterioration.
1
Make sure all units are turned off.
2
Make connections to the device you want to connect
to using a DV cable, as shown in the illustration.
3
If necessary, connect the PC connection cable
(provided) to the printer’s PC connector and the PC’s
RS-232C connector.
4
Turn the camcorder’s POWER Switch to “ ”
while pressing down the Lock Button located on the
switch and turn on the other units.
NOTES:
●
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(
墌
pg. 7).
●
For Digital Dubbing, this camcorder can be connected
only to one device at a time. The GR-DVX10 can be
used as both a player and a recorder. The GR-DVX9 can
be used only as a player (
墌
pg. 62, 63).
●
If Still Playback, Slow-Motion Playback, Fast-Forward or
Rewind is attempted with the camcorder connected to a
video unit via the DV connector, the image will take on
an effect similar to a coloured mosaic pattern or it will
become black.
●
Also refer to the instruction manuals of the connected
units.
●
When using a DV cable, be sure to use the optional JVC
VC-VDV204U DV cable.
To DV OUT
To D V
connector
Digital Printer
To DV IN
connector
PC
DV cable
(optional)
To P C
connector
PC connection
cable (provided)
To RS-232C
POWER Switch
Core filter
Core filter
Core filter
Lock Button
Open the
connector cover.
60 EN
DUBBING
Dubbing To A VCR
[To use this camcorder as a player]
1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 56 and 57.
2
Set the camcorder’s POWER Switch to “ ”
while pressing down the Lock Button located on the
switch, turn on the VCR’s power, and insert the
appropriate cassettes in the camcorder and the VCR.
3
[For GR-DVX10 owners only]
Set “AV/S-VIDEO” to “OUT” in the Menu Screen
(墌 pg. 41).
4
Engage the VCR’s AUX and Record-Pause modes.
5
Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4
/6 on the camcorder.
6
Press
4
/6 on the camcorder and engage the VCR’s
Record mode.
7
Engage the VCR’s Record-Pause mode and press
4
/6 on the camcorder.
8
Repeat steps 5 through 7 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
●
When connecting the cables, make sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
●
You can use the AV OUT connector on the camcorder for
connection.
●
You can use Playback Zoom (
墌
pg. 68) or Playback
Special Effects (
墌
pg. 69) in step 5.
●
Before you start dubbing, make sure that the indications do
not appear on the connected TV. If they do, they are being
recorded onto the new tape.
●
Set the video out select switch of the cable adapter as required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video cable.
To choose whether or not the following displays appear on
the connected TV . . .
• Date/Time
..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen (
墌 pg. 41).
• Time Code
..... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (
墌
pg. 41).
• Playback Sound Mode, Tape Speed And Tape Running Displays
..... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu
Screen (
墌 pg. 41). Or, press DISPLAY on the remote
control.
VCR
TV
* Connect when an S-Video cable is not used.
POWER Switch
To S
S-Video
cable
(optional)
Red to
AUDIO R
Yellow to
VIDEO*
White to
AUDIO L
Audio/Video cable
[RCA plug to RCA
plug] (optional)
Lock Button
To AUDIO,
VIDEO*
and
-IN
connectors
“Y/C”/“CVBS”
video out
select switch
Cable Adapter
(provided)
If your VCR has a
SCART connector,
use the provided
cable adapter.
Core filter
EN61
VCR
TV
* Connect when an S-Video cable is not used.
POWER Switch
To S
S-Video
cable
(optional)
Red to
AUDIO R
Yellow to
VIDEO*
White to
AUDIO L
Audio/Video cable
[RCA plug to RCA
plug] (optional)
Lock Button
Core filter
Dubbing From A VCR
[To use this camcorder as a recorder: Only
for GR-DVX10 owners]
1
Make sure all units are turned off, then connect the
camcorder and the VCR as shown in the illustration.
Also refer to pg. 56 and 57.
2
Set “SOUND MODE” to “12 BIT” or “16 BIT” and
“REC MODE” to “SP” or “LP” in the Menu Screen
depending on your preference (墌 pg. 11, 26, 27).
3
Set the camcorder’s POWER Switch to “ ”
while pressing down the Lock Button located on the
switch. Turn on the VCR’s power and insert the
appropriate cassettes in the camcorder and the VCR.
4
Set “AV/S-VIDEO” to “IN” in the Menu Screen to
engage the analogue input mode (墌 pg. 41).
5
Press START/STOP on the camcorder to engage the
Record-Pause mode. “AV. IN” appears on the screen.
6
Engage the VCR’s Play mode, then engage the Still
Playback mode when you have found a spot just
before the edit-in point.
7
Press START/STOP on the camcorder to engage the
Record mode. “
AV. IN
” appears on the screen.
Engage the VCR’s Play mode.
8
To stop dubbing, press START/STOP on the
camcorder so that “AV. IN” reappears, then engage
the VCR’s Stop mode.
9
Repeat steps 6 through 8 for additional editing.
10
Set “AV/S-VIDEO” back to “OUT” in the Menu
Screen to disengage the analogue input mode
(墌 pg. 41).
NOTES:
●
When connecting the cables, make sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
●
To use an output cable adapter (commercially avail-
able), refer to its instructions.
●
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
(
墌
pg. 7).
●
Analogue signals can be converted to digital signals with
this procedure.
●
It is also possible to dub from another camcorder.
Cable Adapter
(not provided)
If your VCR has a
SCART connector,
use a commercially
available output
cable adapter.
To Audio, Video*
and S-Video
connectors
62 EN
PLAY (
4
)
STOP (5)
Dubbing To A Video Unit Equipped With A
DV Connector (Digital Dubbing)
It is also possible to copy recorded scenes from the
camcorder onto another video unit equipped with a DV
connector. Since a digital signal is sent, there is little if any
image or sound deterioration.
[To use this camcorder as a player]
1
Make sure the camcorder’s power is off.
2
Connect the camcorder to your video unit equipped
with a DV connector using a DV cable as shown in
the illustration.
3
Set the camcorder’s POWER Switch to “ ”
while pressing down the Lock Button located on the
switch. Press
4
to play back the source tape.
4
While watching the playback on the monitor, engage
the DV connector-equipped video unit’s record mode
from the spot on the source tape you want to begin
recording.
NOTES:
●
It is recommended to use the AC Power Adapter/ Charger
as the power supply instead of the battery pack (
墌
pg. 7).
●
If the remote control is used when both the player and
recorder are JVC video units, both units will perform the
same operation. To prevent this from happening, press
the buttons on both units.
●
For Digital Dubbing, this camcorder can be connected
only to one device at a time.
●
If a blank portion or disturbed image is played back on
the player during dubbing, the dubbing may stop so that
an unusual image is not dubbed.
●
Even though the DV cable is connected correctly,
sometimes the image may not appear in step 3. If this
occurs, turn off the power and make connections again.
●
If “Playback Zoom” (
墌
pg. 68), “Playback Special
Effects” (
墌
pg. 69) or “Snapshot” is attempted during
playback, only the original playback image recorded on
the tape is output from the DV OUT connector.
●
When using a DV cable, be sure to use the optional JVC
VC-VDV204U DV cable.
DV cable
(optional)
Video unit equipped
with DV connector
To DV IN
To DV OUT
POWER Switch
Core filter
Core filter
Lock Button
Open the
connector cover.
DUBBING
(cont.)
EN63
DV cable
(optional)
Video unit equipped
with DV connector
To DV OUT
To DV IN/OUT
POWER Switch
Core filter
Core filter
Lock Button
Open the
connector cover.
Dubbing From A Video Unit Equipped With
A DV Connector (Digital Dubbing)
[To use this camcorder as a recorder: Only
for GR-DVX10 owners]
NOTE:
Before the following steps, make sure that “AV/S-VIDEO”
is set to “OUT” in the Menu Screen (
墌
pg. 41).
1
Make sure all units are turned off. Connect the
camcorder to a video unit equipped with a DV output
connector using a DV cable as shown in the
illustration.
2
Set “REC MODE” to “SP” or “LP” in the Menu Screen
depending on your preference (墌 pg. 11).
3
Set this camcorder’s POWER Switch to “ ”
while pressing down the Lock Button located on the
switch. Turn on the video unit’s power and insert the
appropriate cassettes in the camcorder and the video
unit.
4
Press START/STOP on the camcorder to engage the
Record-Pause mode.
“DV. IN” appears on the screen.
5
Engage the video unit’s Play mode, then engage the
Still Playback mode when you have found a spot just
before the edit-in point.
6
Press START/STOP on the camcorder to engage the
Record mode. “
DV. IN
” appears on the screen.
Engage the video unit’s Play mode.
7
To stop dubbing, press START/STOP on the
camcorder so that “DV. IN” reappears, then engage
the video unit’s Stop mode.
8
Repeat steps 5 through 7 for additional editing.
NOTES:
●
It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack
(
墌
pg. 7).
●
If the remote control is used when both the player and recorder are JVC video units, both units will perform
the same operation. To prevent this from happening, press the buttons on both units.
●
For Digital Dubbing, this camcorder can be connected only to one device at a time.
●
If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so
that an unusual image is not dubbed.
●
Even though the DV cable is connected correctly, sometimes the image may not appear in step 5. If this
occurs, turn off the power and make connections again.
●
When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.
●
Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current
“SOUND MODE” setting (
墌
pg. 27).
●
During Digital Dubbing, no signals are output from the video or audio connectors.
64 EN
T
P
O
US
C
H
OP
"
Y
SN
T
A
O
PS
T
H
A
O
P
T
E
"
POWER Switch
Rewind Button (
2
)
Fast-Forward Button (
3
)
Dubbing Images Stored In A
MultiMediaCard To A Tape
Images can be dubbed from a MultiMediaCard to a tape.
1
Load a MultiMediaCard (墌 pg. 12) and cassette
(墌 pg. 10).
2
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
3
2
To locate the point where you wish to dub a still
image, play back the tape. Stop playback at the
desired point.
4
3
Set the POWER Switch to “
M
E
M
O
R
Y
P
L
A
Y
” while pressing
down the Lock Button located on the switch. To
select a still image to be dubbed, perform Index
Playback (墌 pg. 47), Auto Playback (墌 pg. 45) or
press
2
or
3
to select the image you wish.
5
To engage Dub-Standby, press SNAPSHOT. The
message “TO COPY TO TAPE PUSH "SNAPSHOT"”
appears.
6
While the message is being displayed, press
SNAPSHOT again. The selected still image is
recorded on the tape for approx. 6 seconds.
•The indicator disappears when dubbing is
complete.
NOTES:
●
If SNAPSHOT is pressed in step 5 when the tape’s erase
protection tab is set to “SAVE”, the message “COPYING
FAILED” is displayed.
●
The XGA image is dubbed onto the tape at 720 x 480
pixels.
●
You can superimpose a print frame over the selected still
image to be dubbed (
墌
pg. 51) and dub it to a tape.
After step 4, superimpose a print frame over the still
image and go to step 5.
Display
DUBBING
(cont.)
SNAPSHOT Button
Lock Button
EN65
SP
6
1
S
1
S
R
B
A
R
O
2
Y
E
L
V
E
U
B
N
C
A
/
V
T
N
I
C
N
S
I
U
D
T
H
M
K
–
D
R
R
O
V
E
N
M
M
O
D
S
C
I
O
O
O
E
R
O
D
D
D
C
P
E
M
E
E
H
Y
O
EN
O
O
U
F
N
F
Play/Pause
Button (
4
/6)
Display
POWER Switch
SNAPSHOT Button
Dubbing Images Recorded On A Tape To A
MultiMediaCard
Images can be dubbed from a tape to a MultiMediaCard.
1
Load a MultiMediaCard (墌 pg. 12) and cassette
(墌 pg. 10).
2
Set the POWER Switch to “ ” while pressing
down the Lock Button located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
3
Press the MENU wheel. The Menu Screen appears.
Rotate it to select “ ” and press it. “VIDEO MENU”
appears.
4
Rotate the MENU wheel to select “ COPY”
and press it. The Sub Menu appears. Rotate it to
select “ON” and press it. Selection is complete.
5
Rotate the MENU wheel to select “
1
RETURN” and
press it twice. The normal playback screen resumes.
6
To select a video image to be dubbed, start playback
by pressing
4
/6. At the moment you find the image
you wish to dub, press it again to engage Still
Playback.
7
To start dubbing, press SNAPSHOT. The selected
image is stored in the MultiMediaCard.
•“ ” blinks during dubbing.
NOTES:
●
If SNAPSHOT is pressed in step 7 when a
MultiMediaCard is not loaded, the message “COPYING
FAILED” is displayed.
●
If an image recorded on the tape using the WIDE mode
(
墌
pg. 28) is dubbed to a MultiMediaCard, the WIDE
mode identifying signal is not dubbed with it.
●
To use Playback Special Effects with a video image you
wish to dub, perform up to step 7 using the remote
control (provided) (
墌
pg. 69).
●
Images are dubbed in VGA file size.
MENU Wheel
Lock Button
GR-DVX10 only
66 EN
30°
30°
5m
1
3
2
+
–
+
–
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible.
Installing The Batteries
The remote control uses two “AAA (R03)” size
batteries. See “General Battery Precautions”
( pg. 93).
1
Remove the battery compartment cover while
pushing up the tab as illustrated.
2
Insert two “AAA (R03)” size batteries in the
correct direction.
3
Re-attach the battery compartment cover.
USING THE REMOTE CONTROL UNIT
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.
Transmitted beam
effective area
Remote sensor
Tab
EN67
10
)
@
$
!
#
%
^
&
*
(
2
3
4
6
8
5
7
9
Buttons
1 Infrared beam transmitting window
2 Zoom (T/W) Buttons
3 DISPLAY Button
4 SHIFT Button
5 SLOW Rewind/Forward Buttons
Left/Right Buttons
6 REW Button
7 FADE/WIPE Button
8 EFFECT ON/OFF Button
9 EFFECT Button
0 PAUSE IN Connector
! START/STOP Button
@ MBR SET Button
# SNAPSHOT Button
$ Up Button
INSERT Button*
% Down Button
A. DUB Button
^ PLAY Button
& FF Button
* STOP Button
( PAUSE Button
) R.A.EDIT Buttons
Functions
With the camcorder’s POWER
Switch set to the camera position
(“ ”).
Transmits the beam signal.
Zoom in/out ( pg. 20)
—
—
—
—
—
—
—
—
—
Functions the same as START/STOP on the camcorder.
—
Functions the same as SNAPSHOT on the camcorder.
—
—
—
—
—
—
—
—
—
With the camcorder’s POWER
Switch set to “ ” or
“
MEMORY
PLAY
”.
Zoom in/out ( pg. 68)
pg. 71
pg. 68, 70
pg. 68
pg. 68
• Rewind/Reverse Shuttle Search
on a tape (
pg. 40)
• Displays previous image in a
MultiMediaCard ( pg. 45)
pg. 72
pg. 69
pg. 69
pg. 71
pg. 70
pg. 68
—
pg. 68
pg. 76
• Starts Playback of a tape (
pg. 40)
• Starts Auto Playback of a
MultiMediaCard ( pg. 45)
• Forward/Forward Shuttle Search
on a tape (
pg. 40)
• Displays next image in a
MultiMediaCard ( pg. 45)
• Stops the tape (
pg. 40)
• Stops Auto Playback ( pg. 45)
Pauses the tape (
pg. 68)
pg. 70 – 75
* This function is unavailable with this camcorder.
68 EN
USING THE REMOTE CONTROL UNIT
(cont.)
Press TNormal playback
Left or SLOW
Rewind Button
To move image,
press
(Right)
while keeping
SHIFT held down.
PAUSE
PLAY
Zoom Buttons
SHIFT
Remote sensor
Right or SLOW
Forward Button
Up Button
Down
Button
STOP
FEATURE:
Slow-Motion Playback
PURPOSE:
To allow slow-speed search in either direction during
video playback.
OPERATION:
1) To change from normal to Slow-Motion Playback, press
SLOW (
9
or
0
) more than approx. 2 seconds. After
approx. 1 minute in Slow Rewind or approx. 2 minutes
in Slow Forward, normal playback resumes.
To stop Slow-Motion Playback, press PLAY (
4
).
NOTES:
●
You can also engage Slow-Motion Playback from Still
Playback by pressing SLOW more than approx. 2
seconds.
●
During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic effect.
●
After SLOW
(
9
or
0
)
is pressed and held, the still
image may be displayed for a few seconds, followed by
a blue screen for a few seconds. This is not a
malfunction.
●
There may be a small margin between the slow-motion
playback start point you chose and the actual start
point for Slow-Motion Playback.
●
During Slow-Motion Playback, there will be distur-
bances in video and the picture may seem unstable,
especially with steady images. This is not a malfunc-
tion.
●
During Slow-Motion Playback, press PAUSE
(6)
to
pause playback.
FEATURE:
Frame-By-Frame Playback
PURPOSE:
To allow frame-by-frame search during video playback.
OPERATION:
1) To change from normal to Frame-By-Frame Playback,
press SLOW (
0
) repeatedly for forward or SLOW (
9
)
repeatedly for reverse. Each time it is pressed, the frame
is played back.
NOTE:
You can also engage Frame-By-Frame Playback from Still
Playback by pressing SLOW
(
9
or
0
)
repeatedly.
FEATURE:
Playback Zoom
PURPOSE:
To magnify the recorded image up to 10X at any time during playback.
OPERATION:
1) Press PLAY (
4
) to find the scene of interest.
2) Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
3) You can move the image on screen around to find a particular portion of the picture. While holding down
SHIFT, press
(Left), (Right), (Up) and (Down).
To end zoom, press and hold W until magnification returns to normal. Or, press STOP (5) and then press PLAY (
4
).
NOTES:
●
Zoom can also be used during slow-motion and still playback.
●
Due to digital image processing, the quality of the image may suffer.
●
Playback Zoom cannot be used on images that were recorded with the MODE Dial set to “ ”.
EN69
P
4
L
O
A
F
1
2
3
4
5
Y
F
BACK
C
M
S
S
V
L
O
E
T
I
E
A
N
P
R
D
F
S
O
I
O
E
F
S
T
A
B
O
E
I
O
E
C
C
N
E
T
E
C
F
H
I
O
LM
PLAY
EFFECT
EFFECT ON/OFF
PLAYBACK
EFFECT Select
Menu
Remote sensor
FEATURE:
Playback Special Effects
PURPOSE:
To allow you to add creative effects to the video
playback image.
OPERATION:
1) To start playback, press PLAY (
4
).
2) Point the remote control at the camcorder's remote
sensor and press EFFECT. The PLAYBACK EFFECT
Select Menu appears.
3) Move the highlight bar to the desired effect by
pressing EFFECT. The selected function is activated
and after 2 seconds the menu disappears.
To deactivate the selected effect, press EFFECT ON/
OFF on the remote control. Pressing it again re-
activates the selected effect.
To change the selected effect, repeat from step 2
above.
NOTE:
The effects that can be used during playback are
Classic Film, Monotone, Sepia, Strobe and Video Echo.
The effects work the same in playback as they did in
recording. Refer to page 36 for more information.
70 EN
VCR CODE LIST
6 2
6 4
7 7
MITSUBISHI 6 7
6 8
NEC 3 7
3 8
GRUNDIG 1 4
3 4
HITACHI 6 6
6 3
PANASONIC 1 3
1 7
1 1
9 4
1 8
JVC 9 1
9 6
9 3
BLAUPUNKT
AKAI
9 7
9 8
3 2
FERGUSON
1 3
A
B
C
VCR BRAND
NAME
BUTTONS
(A) (B)
SANYO 3 6
3 5
SHARP 1 5
1 `
TOSHIBA 6 9
6 1
SONY
6 5
6 `
3 9
3 1
THOMSON,
TELEFUNKEN,
SABA,
NORDMENDE
9 1
9 6
9 7
3 2
SELECO,
REX
9 1
9 6
PHILIPS
1 9
9 5
1 1
9 4
9 1
9 6
1 2
3 3
7 2
VCR BRAND
NAME
BUTTONS
(A) (B)
MBR SET
SHIFT
3
1
6
789`
4
2
5
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as
the source player. You can select up to 8 “cuts” for
automatic editing, in any order you like. R.A.Edit is
more easily performed when the MBR (Multi-Brand
Remote) is set to operate with your brand of VCR (see
VCR CODE LIST), but can also be performed by
operating the VCR manually.
Before operation, make sure the batteries are installed
in the remote control ( pg. 66).
SET REMOTE/VCR CODE
1
Turn off the power to the VCR and point the
remote towards the VCR’s infrared sensor. Then,
referring to the VCR CODE LIST, press and hold
MBR SET, and press button (A) and then (B).
The code is automatically set once you release
MBR SET, and the VCR’s power comes on.
2
Make sure the VCR’s power is on. Then, while
holding SHIFT, press the button on the remote
for the desired function. The functions the
remote can control are PLAY, STOP, PAUSE, FF,
REW and VCR REC STBY (you do not need to
press SHIFT for this one).
You are now ready to try Random Assemble
Editing.
IMPORTANT
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with
yours or may offer limited functions.
NOTES:
●
If the VCR’s power does not come on in step 1, try
another code from the VCR CODE LIST.
●
Some brands of VCR do not come on automati-
cally. In this case, turn the power on manually and
try step 2.
●
If the remote control is not able to control the VCR,
use the controls on the VCR.
●
When the remote control’s batteries run out, the
VCR brand you have set will be erased.
In that case, replace the old battery with a new one
to reset the VCR brand.
USING THE REMOTE CONTROL UNIT
(cont.)
VCR (Recording deck)
EN71
DISPLAY
MAKE CONNECTIONS
Also refer to pg. 56 and 57.
1
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a remote
pause connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control’s PAUSE IN connector.
2
Insert a recorded tape into the camcorder and set the
POWER Switch to “ ” while pressing down the
Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s instructions).
NOTES:
●
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen ( pg. 41).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (
pg. 41).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the
Menu Screen ( pg. 41). Or, press DISPLAY on the
remote control.
●
For GR-DVX10 owners: Make sure to set “AV/S-VIDEO”
to “OUT” in the Menu Screen (
pg. 41).
●
When connecting the cables, make sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
●
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video cable.
●
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
●
You can use the AV OUT connector on the camcorder
for connection.
CONTINUED ON NEXT PAGE
To Remote
PAUSE or R.A.EDIT
VCR
TV
To PAUSE IN
Editing
cable
(provided)
S-Video
cable
(optional)
Audio/Video
cable [RCA plug
to RCA plug]
(optional)
* Connect when an S-Video cable is not used.
To JLIP
(EDIT)
To S
Core filter
Core filter
ATTENTION FOR EDITING CABLE
• Be careful not to mistake it for the JLIP
cable ( pg. 4).
• Make sure you connect the end with the
core filter to the camcorder.
Red to
AUDIO
R
Yellow to
VIDEO*
White to
AUDIO
L
To AUDIO,
VIDEO* and
-IN
connectors
“Y/C”/“CVBS”
video out
select switch
If your VCR has the
SCART connector,
use the provided
cable adapter.
72 EN
1
2
3
4
5
6
7
8
––
T
T
I
O
M
T
–
E
A
I
–
L
N
:
C
–
O
–
D
~
~
~
~
~
~
~
~
E
O
–
0
U
–
0
T
:
:
–
0
–
0
M
ODE
PLAY
CANCEL
R.A.EDIT
ON/OFF
FADE/WIPE
EFFECT
EDIT IN/OUT
SELECT SCENES
4
Point the remote control at the camcorder’s remote
sensor. Press PLAY (
4
) and then press R.A.EDIT ON/
OFF on the remote control.
The Random Assemble Editing Menu appears.
5
If using a Fade/Wipe at the beginning of the scene,
press FADE/WIPE on the remote control.
•Cycle through the effects by pressing repeatedly,
and stop when the one you want is displayed.
•You cannot use a Picture Wipe/Dissolve at the
beginning of Programme 1.
6
At the beginning of the scene, press EDIT IN/OUT on
the remote control. The Edit-In position appears in
the Random Assemble Editing Menu.
7
At the end of the scene, press EDIT IN/OUT. The
Edit-Out position appears in the Random Assemble
Editing Menu.
8
If using a Fade/Wipe at the end of the scene, press
FADE/WIPE.
•Cycle through the effects by pressing repeatedly,
and stop when the one you want is displayed.
•If you select a Fade/Wipe effect for an Edit-Out
point, the effect is automatically applied to the
following Edit-In point.
•You cannot use a Picture Wipe/Dissolve at the end
of the last scene.
•When you use Fade/Wipe effects, that time is
included in the total time (this does not apply to
Picture Wipe/Dissolve).
1
9
If using Playback Special Effects, press EFFECT
( pg. 69).
10
Repeat steps 6 through 9 to register additional scenes.
•To change previously registered points, press
CANCEL on the remote control. The registered
points disappear, one at a time, from the most
recently registered point.
•If you are not using Fade/Wipe or Programme AE
with special effects, repeat steps 6 and 7 only.
USING THE REMOTE CONTROL UNIT
(cont.)
NOTES:
●
When choosing a scene, set Edit-In and Edit-Out points so that there is a relatively large difference between
them.
●
If the search time for an in-point exceeds 5 minutes, the recording deck’s Record-Standby mode will be
cancelled and editing will not take place.
●
If there are blank portions before or after the Edit-In and Edit-Out points, a blue screen may be included in
the edited version.
●
Since time codes register time only as accurately as seconds, the time code total time may not match the
total programme time exactly.
●
Turning off the camcorder’s power erases all registered Edit-In and Edit-Out points.
●
If you select Sepia or Monotone mode from Programme AE with special effects, you cannot use the Dissolve
or Black & White Fader. In this case the Dissolve or Black & White indicator begins blinking. Once the next
Edit-In point is registered, the effect is turned off. To combine these effects, use Sepia or Monotone during
recording, then use the Dissolve or Black & White Fader during Random Assemble Editing.
●
It is not possible to use Fade/Wipe effects and Programme AE with special effects during Random Assemble
Editing using a DV cable.
Random Assemble
Editing Menu
Programme
Remote sensor
EN73
1
2
3
4
5
6
7
8
–
–
–
–
T
T
I
O
M
T
0
0
0
0
1
–
E
A
I
0
7
3
9
5
–
L
N
:
:
:
:
:
:
C
2
1
3
3
5
–
O
5
8
3
0
5
–
D
~
~
~
~
~
~
~
~
E
O
0
0
0
1
1
1
U
2
8
5
3
6
6
9
T
:
:
:
:
:
:
:
0
3
5
1
2
3
3
5
1
3
5
0
0
9
M
–
–
O
–
–
DE
–
–
–
–
–
–
PAUSE
VCR REC
STBY
REW
STOP
CANCEL
R.A.EDIT
ON/OFF
FADE/WIPE
EFFECT
EDIT IN/OUT
AUTOMATIC EDITING TO VCR
11
Rewind the tape in the camcorder to the beginning of
the scene you want to edit and press PAUSE (6).
12
Point the remote control towards the VCR’s remote
sensor and press VCR REC STBY (q6), or manually
engage the VCR’s Record-Pause mode.
13
Press START/STOP on the camcorder. Editing
proceeds as programmed, right through to the end of
the last registered scene.
•Pressing START/STOP on the remote control does
not start editing.
•When dubbing is complete, the camcorder enters
the Pause mode, and the VCR enters its Record-
Pause mode.
•If you do not register an Edit-Out point, the tape will
be dubbed all the way to the end automatically.
•If you operate the camcorder during automatic
editing, the VCR will enter its Record-Pause mode
and automatic editing will stop.
1
14
Engage the Stop modes for the camcorder and the
VCR.
To make the R.A.Edit counter display disappear, press
R.A.EDIT ON/OFF on the remote control.
NOTES:
●
Pressing R.A.EDIT ON/OFF on the remote control clears
all settings registered during Random Assemble Editing.
●
When the editing cable is connected to the remote
control’s Pause In connector during dubbing, make sure
the remote control is pointed at the VCR’s sensor, and
the path between the two is unobstructed.
●
Random Assemble Editing may not function properly
when using a tape including several duplicated time
codes (
pg. 21).
START/STOP
Button
Random Assemble
Editing Menu
Remote Sensor
74 EN
1
2
3
4
5
6
7
8
––
T
T
I
O
M
T
–
E
A
I
–
L
N
:
C
–
O
–
D
~
~
~
~
~
~
~
~
E
O
–
0
U
–
0
T
:
:
–
0
–
0
M
ODE
R.A.EDIT
ON/OFF
USING THE REMOTE CONTROL UNIT
(cont.)
For More Accurate Editing
Some VCRs make the transition from Record-Pause to
Record mode faster than others. Even if you begin editing
for the camcorder and the VCR at exactly the same time,
you may lose scenes you wanted, or find that you have
recorded scenes you did not want. For a cleanly edited
tape, confirm and adjust the timing of the camcorder
against your VCR.
DIAGNOSING VCR/CAMCORDER TIMING
1
Play back the tape in the camcorder, then point the
remote control at the camcorder’s remote sensor and
press R.A.EDIT ON/OFF.
The Random Assemble Editing Menu appears.
2
Perform Random Assemble Editing on Programme 1
only. In order to check VCR and camcorder timing,
select the beginning of a scene transition as your Edit-
In point.
3
Play back the dubbed scene.
•If any images from the scene prior to the
transition you chose for your Edit-In point were
recorded, that means your VCR moves too quickly
from Record-Pause to Record mode.
•If the scene you tried to dub starts in progress, the
VCR is slow to start recording.
Random Assemble
Editing Menu
Programme 1
VCR
(Recording deck)
Remote sensor
TV
EN75
1
S
1
S
R
B
A
R
O
2
Y
E
L
V
E
U
B
N
C
A
/
V
T
N
I
C
N
S
I
U
D
T
H
M
K
–
D
R
R
O
C
V
E
N
M
M
O
D
S
O
I
O
O
O
E
R
P
D
D
D
C
Y
E
M
E
E
H
O
EN
+
U
1
.
0
ADJUSTMENT OF VCR/CAMCORDER
TIMING
4
Point the remote control at the camcorder’s remote
sensor and press R.A.EDIT ON/OFF to make the
Random Assemble Editing menu disappear, then
press the MENU wheel. The Menu Screen appears.
5
Rotate the MENU wheel to select “ ” and press it.
“VIDEO MENU” appears. Then, rotate it to
“SYNCHRO” and press it. The value for “SYNCHRO”
is highlighted.
6
Based on the diagnostics performed ( pg. 74), you
can now advance the VCR’s record timing by rotating
the MENU wheel towards “+”. You can also delay the
VCR’s record timing by rotating the MENU wheel
towards “–”. The adjustment range is from –1.3 to
+1.3 seconds, in 0.1-second increments.
Press the MENU wheel to finish the setting.
7
Rotate the MENU wheel to select “
1
RETURN” and
press it twice.
Now perform Random Assemble Editing beginning
with step 4 on page 72.
NOTES:
●
Before performing actual Random Assemble Editing, do
a few Random Assemble Editing trial runs to check
whether the value you have input is appropriate or not,
and make adjustments accordingly.
●
Depending on the recorder, there may be situations
where the timing difference cannot be fully corrected.
Display
MENU Dial
VCR
(Recording deck)
TV
GR-DVX10 only
76 EN
6e
PAUSE
PLAY
DISPLAY
A.DUB
STOP
USING THE REMOTE CONTROL UNIT
(cont.)
Audio Dubbing
The audio track can be customized only when recorded in
the 12-bit mode ( pg. 27).
NOTES:
●
Audio Dubbing is not possible on a tape recorded in 16-
bit audio, on a tape recorded in the LP mode or on a
blank portion of a tape.
●
To perform Audio Dubbing while watching on the
television, make connections (
pg. 56).
1
Play back the tape to locate the point where editing
will start, then press PAUSE (6).
2
While holding A.DUB (e) on the remote control,
press PAUSE (6). “6e” appears.
3
Press PLAY (
4
) , then begin “narrating”.
Speak into the microphone.
•To pause dubbing, press PAUSE (6).
4
To end Audio Dubbing, press PAUSE (6), then STOP
(5).
To hear the dubbed sound during playback . . .
.... set “12BIT MODE” to “SOUND 2” or “MIX” in the
Menu Screen ( pg. 41, 42).
NOTES:
●
Audio dubbing is also possible using an optional
microphone connected to the MIC connector on the
Docking Station.
●
Sound is not heard from the speaker during Audio
Dubbing. To hear sound, connect optional headphones
to the AV OUT connector.
●
While an optional microphone is connected, the built-in
microphone is disabled.
●
When editing onto a tape that was recorded at 12-bit,
the old and new soundtracks are recorded separately.
●
If you dub onto a blank space on the tape, the sound
may be disrupted. Make sure you only edit recorded
areas.
●
If feedback or howling occurs during TV playback, move
the camcorder’s microphone away from the TV, or turn
down the TV’s volume.
●
If you change from 12-bit to 16-bit in mid-recording and
then use the tape for Audio Dubbing, it is not effective
from the point where 16-bit recording began.
●
During Audio Dubbing, when the tape moves to scenes
recorded in the LP mode, scenes recorded in 16-bit
audio or a blank portion, Audio Dubbing stops
(
pg. 91).
●
For GR-DVX10 owners: To perform Audio Dubbing with
a video unit connected to the camcorder’s AV connector,
first set “AV/S-VIDEO” to “IN” in the Menu Screen
(
pg. 41). You can hear sound from the video unit
using optional headphones.
Speaker
Audio Dub
Standby mode
POWER Switch
Display
AV OUT
(headphone)
connector
Stereo microphone
Remote sensor
External
microphone
input connector
Located
beneath
the cover.
Lock Button
EN77
EXPLOS ION
6e
PAUSE
PLAY
STOP
EDIT IN/OUT
Audio Dub
Standby mode
Display
Audio Dubbing Using Digital Sound Effects
1
Load the provided MultiMediaCard ( pg. 12) and
perform step 1 and 2 of page 76.
2
Press EDIT IN/OUT so that “ ” appears.
•To select the sound effect, press INDEX to display
the SOUND Index Screen ( pg. 47), then use the
MENU wheel to select the desired sound effect.
•If no Digital Sound Effect is displayed the
microphone input will be dubbed onto the tape.
3
Press PLAY (
4
) to begin Audio Dubbing.
4
Press DIGITAL SOUND where you want to use the
sound effect.
•The displayed sound effect blinks while it is being
dubbed.
•To stop dubbing the sound effect midway, press
DIGITAL SOUND again.
5
Press STOP (5) to end Audio Dubbing.
NOTES:
●
The dubbed sound effect is recorded on SOUND 2
(
pg. 42).
●
If you press PAUSE (
6
) to pause dubbing in step 4 the
selected sound effect indication remains displayed.
●
If you press STOP (
5
) to end Audio Dubbing in step 5
the selected sound effect continues to be heard from the
connected headphones (optional); press DIGITAL
SOUND to stop the sound effect.
MENU Wheel
POWER Switch
MODE Dial
INDEX Button
DIGITAL SOUND Button
Lock Button
78 EN
1
2
1
2
3
USER MAINTENANCE
OPEN/EJECT SwitchPUSH HERE
Cassette holder
Cleaning The Camcorder
1
To clean the exterior, wipe gently with a soft
cloth.
Put the cloth in diluted mild soap and wring it
well to wipe off heavy dirt. Then wipe again
with a dry cloth.
2
Open the LCD monitor. Wipe gently with a soft
cloth. Be careful not to damage the monitor.
Close the LCD monitor.
3
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
4
Pull out the viewfinder fully.
5
Open the viewfinder cleaning hatch in the
direction of the arrow 1.
Insert a lens blower or soft cloth into the gap at
the side of the viewfinder and clean the interior
of the viewfinder with it 2.
6
Close the hatch until it locks in place and push
the viewfinder back in.
NOTES:
●
Avoid using strong cleaning agents such as benzine
or alcohol.
●
Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
●
Mould may form if the lens is left dirty.
●
When using a cleaner or chemically treated cloth
refer to the cautions of each product.
After Use
1
Turn off the camcorder.
2
Slide down and hold OPEN/EJECT in the
direction of the arrow, then pull the cassette
holder cover open until it locks. The cassette
holder opens automatically. Remove the
cassette.
3
Press “PUSH HERE” to close the cassette holder.
•Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
4
Open the card cover, then press EJECT. The
MultiMediaCard is disengaged from the
camcorder. Remove the MultiMediaCard.
5
Close the card cover.
6
Slide down BATT. RELEASE 1 and remove the
battery pack 2 3.
BATT. RELEASE
Switch
Remove.
Hatch Lens blower
EN79
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
TROUBLESHOOTING
1.
No power is supplied.
2.
“SET DATE/TIME!” appears.
3.
Recording cannot be
performed.
4.
There is no picture.
5.
Some functions are not
available using the MENU
wheel.
6.
The focus does not adjust
automatically.
7.
The cassette will not load
properly.
8.
The MultiMediaCard will not
load properly.
9.
In the 5-Second mode,
recording ends before
5 seconds have elapsed.
10.
Snapshot mode cannot be
used.
1.
• The power is not connected
properly.
• The battery is dead.
• The LCD monitor is not open
fully or the viewfinder is not
pulled out when recording.
2.
• The built-in clock’s
rechargeable lithium battery is
discharged.
• The previously set date/time is
erased.
3.
• The tape’s erase protection tab
is set to “SAVE”.
• The POWER Switch is set to
“
”, “
M
E
M
O
R
Y
P
L
A
Y
” or “OFF”.
•“TAPE END” appears.
• The cassette holder cover is
open.
4.
• The camcorder is not getting
power, or some other
malfunction exists.
5.
• The Operation Switch is set to
“
”.
6.
• Focus is set to the Manual
mode.
• The recording was done in a
dark place, or the contrast
was low.
• The lens is dirty or covered
with condensation.
7.
• The cassette is in the wrong
position.
• The battery’s charge is low.
8.
• The MultiMediaCard is in the
wrong position.
9.
• The 5-Second mode is set to
“ANIM.” in the Menu Screen.
10.
• The Squeeze mode is
selected.
1.
• Connect the AC Power
Adapter/Charger securely
(
pg. 7).
• Replace the dead battery with
a fully charged one (
pg. 6,
7).
• Open the LCD monitor fully
or pull out the viewfinder.
2.
• Connect the camcorder to an
AC outlet using the AC Power
Adapter/Charger for over
24 hours to charge the clock’s
lithium battery (
pg. 9).
3.
• Set the tape’s erase protection
tab to “REC” (
pg. 10).
• Set the POWER Switch to
“
” ( pg. 14).
• Replace with new cassette
(
pg. 10).
• Close the cassette holder
cover.
4.
• Turn the camcorder’s power
off and on again (
pg. 16).
5.
• Set the Operation Switch to
“
” ( pg. 14).
6.
• Set Focus to the Auto mode
(
pg. 25).
• Clean the lens and check the
focus again (
pg. 78).
7.
• Set it in the right position
(
pg. 10).
• Install a fully charged battery
(
pg. 6, 7).
8.
• Set it in the right position
(
pg. 12).
9.
• Select “5S” in the Menu
Screen (
pg. 33).
10.
• Disengage the Squeeze mode
(
pg. 28).
If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery
pack, AC Power Adapter/Battery Charger, etc.) and wait a few minutes; and then re-connect it and proceed
as usual from the beginning.
CONTINUED ON NEXT PAGE
80 EN
TROUBLESHOOTING
(cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
11.
The colour of Snapshot looks
strange.
12.
Although Snapshot is
attempted, flash does not
take place.
13.
Although a Snapshot is taken
with the flash, Red-Eye
Reduction does not take
place.
14.
The image taken using
Snapshot is too dark.
15.
The image taken using
Snapshot is too bright.
16.
Digital Zoom does not work.
11.
• The light source or the subject
does not include white. Or
there are various different
light sources behind the
subject.
• The Sepia or Monotone mode
is activated.
12.
• The subject is too bright with
the flash set to “AUTO” or
“AUTO
”.
• If
blinks, the flash is being
charged.
• The camcorder is in the
Record mode.
• In the Menu Screen, “GAIN
UP” is set to “OFF” or “P.AE/
EFFECT” is set to
“TWILIGHT”.
13.
• The subject does not look
straight toward the flash.
• The subject does not look at
the first flash, which is an
important part of Red-Eye
Reduction.
• The camcorder is too far from
the subject.
•“FLASH” is not set to “AUTO
” in the Menu Screen.
14.
•“FLASH” is set to “OFF” in the
Menu Screen.
• The flash emission window is
covered by fingers, etc..
• The flash brightness is set to
produce a darker image
(adjustment value: –3).
• The camcorder is too far from
the subject.
• Shooting was performed
under backlit conditions.
15.
•“FLASH” is set to “ON” in the
Menu Screen.
16.
• 10X optical zoom is selected.
• The MODE Dial is set to
“
D
U
A
L
” or “ ”.
•“P.AE/EFFECT” is set to
“VIDEO ECHO” in the Menu
Screen.
•“WIDE MODE” is set to “PS-
WIDE” in the Menu Screen.
• Picture Wipe or Dissolve are
being used in a scene
transition.
11.
• Set “FLASH” to “ON” in the
Menu Screen. Or find a white
subject and compose your
shot so that it also appears in
the frame (
pg. 18, 19, 30).
• Turn off Sepia and Monotone
(
pg. 36).
12.
• Set “FLASH” to “ON” in the
Menu Screen (
pg. 30).
• It can take up to 10 seconds
to charge the flash.
• Set the camcorder in the
Record-Standby mode
(
pg. 30).
• Set “GAIN UP” to “AUTO
” or “AGC” ( pg. 27) or
disengage the “TWILIGHT”
mode (
pg. 36).
13.
• The subject should look straight
toward the flash, especially the
first flash. If the subject does not
see the first flash, it will be
difficult for Red-Eye Reduction
to take place (
pg. 30).
• The flash is effective for
subjects at a distance of
approx. 0.7 m to 2 m from the
camcorder (
pg. 30).
• Set “FLASH” to “AUTO
”
in the Menu Screen to display
the Red-Eye Reduction
indicator (
pg. 30).
14.
• Set “FLASH” to any position
except “OFF” in the Menu
Screen (
pg. 30).
• Do not cover the flash
emission window.
• Adjust the flash brightness to a
larger value (
pg. 31).
• The flash is effective for
subjects at a distance of
approx. 0.7 m to 2 m
(
pg. 30).
• Press the BACKLIGHT Button
(
pg. 38).
15.
• Set “FLASH” to any parameter
other than “ON” in the Menu
Screen (
pg. 30).
16.
• Set “ZOOM” to “40X” or
“200X” in the Menu Screen
(
pg. 27).
• Set the MODE Dial to “
”
or “VIDEO” (
pg. 15, 20).
• Disengage the “VIDEO
ECHO” mode (
pg. 20, 36).
• Disengage the “PS-WIDE”
mode (
pg. 28).
• Wait until the Picture Wipe or
Dissolve effects are completed
(
pg. 20, 34).
EN81
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
17.
Programme AE with special
effects and Fade/Wipe Effects
do not work.
18.
The Black & White Fader
does not work.
19.
The Dissolve function does
not work.
20.
The Picture Wipe and
Dissolve functions do not
work.
21.
The picture wipe function
does not work.
22.
Scene transition does not go
as expected.
23.
The Video Echo mode does
not work.
17.
• The Operation Switch is set to
“
”.
18.
• The Sepia or Monotone mode
is activated.
19.
• The Sepia, Monotone or Slow
Shutter mode of Programme
AE with special effects is
activated.
•“WIDE MODE” is set to
“SQUEEZE” or “PS-WIDE” in
the Menu Screen.
• The previously selected mode
of Programme AE with special
effects was changed after the
last selected scene for editing
was registered.
20.
• The last selected editing scene
is ending.
• At the end of the last selected
scene for editing, the POWER
Switch was set to “OFF”.
• The power is off.
21.
• The Slow Shutter mode is
activated.
•“WIDE MODE” is not set to
“OFF”.
22.
• When using “Picture Wipe/
Dissolve” (
pg. 34), there is
a delay of a fraction of a
second between the previous
record stop-point and the
Dissolve start-point. This is
normal, but this slight delay
becomes especially
noticeable when shooting
fast-moving subject or during
rapid panning.
23.
• The Picture Wipe or
Dissolve functions are in use.
•“WIDE MODE” is set to
“SQUEEZE” or “PS-WIDE” in
the Menu Screen.
• A Fade-In or Fade-Out is in
progress.
17.
• Set the Operation Switch to
“
” ( pg. 34, 36).
18.
• Turn off Sepia and Monotone
(
pg. 34, 36).
19.
• Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene transition
(
pg. 34, 36).
• Set “WIDE MODE” to
“CINEMA” or “OFF” mode
(
pg. 28).
• Make sure you have selected
the mode of Programme AE
with special effects you want
before starting editing
(
pg. 34, 36).
20.
• Select Picture Wipe or
Dissolve before beginning
recording. The effects are then
automatically activated
(
pg. 34).
• Do not turn off the
camcorder’s power after
setting Edit-In and Edit-Out
points, as they will all be
erased (
pg. 34).
• The camcorder automatically
shuts off after 5 minutes have
elapsed in the Record-Standby
mode. Make sure you
continue operations within 5
minutes after engaging Record-
Standby mode (
pg. 34).
21.
• Disengage the Slow Shutter
mode or set “WIDE MODE”
to “OFF” before preparing to
use the Picture Wipe
(
pg. 28, 34, 36).
22.
————
23.
• Set “WIDE MODE” to
“CINEMA” or “OFF” mode
(
pg. 28).
• Do not try to use the Video
Echo mode during a Fade-In
or Fade-Out (
pg. 34, 36).
CONTINUED ON NEXT PAGE
82 EN
TROUBLESHOOTING
(cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
24.
Even when Slow Shutter is
not selected, the image looks
like it is activated.
25.
There is no strobe when the
Classic Film or Strobe mode
is activated.
26.
White Balance cannot be
activated.
27.
When shooting a subject
illuminated by bright light,
vertical lines appear.
28.
When the screen is under
direct sunlight during
shooting, the screen becomes
red or black for an instant.
29.
During recording, the date/
time does not appear.
30.
Files stored in the
MultiMediaCard cannot be
deleted.
31.
The indicators and messages
do not appear.
32.
Images on the LCD monitor
appear dark or whitish.
33.
The rear of the LCD monitor
is hot.
34.
The indicators and the image
colour on the LCD monitor
are not clear.
24.
• When shooting in the dark,
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.
25.
• The Picture Wipe or Dissolve
function is in use.
26.
• The Sepia or Monotone mode
is activated.
27.
• This is a result of exceedingly
high contrast, and is not a
malfunction.
28.
• This is not a malfunction.
29.
•“DATE/TIME” is set to “OFF”
in the Menu Screen.
• Self-Recording is performed.
30.
• Files stored in the
MultiMediaCard are protected.
31.
•“ON SCREEN” is set to
“SIMPLE” or “TIME CODE” is
set to “OFF” in the Menu
Screen.
32.
• In places subject to low
temperature, images become
dark due to the characteristics
of the LCD monitor. When
this happens, the displayed
colours differ from those that
are actually recorded. This is
not a defect of the camcorder.
• When the LCD monitor's
fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest
JVC dealer.
33.
• The light used to illuminate
the LCD monitor causes it to
become hot.
34.
• This may occur when the
surface or the edge of the LCD
monitor is pressed.
24.
• If you want the lighting to
look more natural, set GAIN
UP to “AGC” or “OFF” in the
Menu Screen (
pg. 27).
25.
• Do not try to use the Classic
Film or Strobe mode during a
scene transition (
pg. 34,
36).
26.
• Turn off Sepia or Monotone
before setting White Balance
(
pg. 36, 39).
27.
————
28.
————
29.
• Set “DATE/TIME” to “ON” in
the Menu Screen (
pg. 29).
• During Self-Recording, the
date/time does not appear
(
pg. 17).
30.
• Remove protection from the
files stored in the
MultiMediaCard and delete
them (
pg. 48, 49).
31.
• Set “ON SCREEN” to “LCD”
or “LCD/TV” and set “TIME
CODE” to “ON” in the Menu
Screen (
pg. 29, 41).
32.
• Adjust the brightness and
angle of the LCD monitor
(
pg. 16, 17).
33.
• Close the LCD monitor to turn
it off or set the POWER
Switch to “OFF”, and let the
unit cool down.
34.
————
EN83
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
35.
• Certain Fade/Wipe effects,
certain modes of Programme
AE with special effects, “DIS”
and other functions that
cannot be used together are
selected at the same time.
36.
• The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or bright
spots of light (red, green or
blue) may appear constantly
on the LCD monitor or the
viewfinder. These spots are not
recorded on the tape. This is
not due to any defect of the
unit. (Effective dots: more than
99.99 %)
37.
• The optional headphones are
not connected to the
headphones connector.
• The sound volume of the
headphones connector was
not adjusted appropriately. The
sound volume at this point is
the same as the level it was
adjusted to during playback.
38.
• The POWER Switch is not set
to “
”.
39.
• The POWER Switch is set to
“
” or “ ”.
40.
• Your TV has AV input
terminals, but is not set to its
VIDEO mode.
• The cassette holder cover is
open.
41.
• During playback of the
unrecorded portion, High-
speed Search and still
playback, LCD monitor
indications appear distorted.
This is not a defect.
42.
• The speaker volume is too great.
43.
• Since the analogue input
mode is engaged, the
camcorder is in the Record-
Standby mode.
44.
————
35.
• Re-read the sections covering
Fade/Wipe effects,
Programme AE with special
effects and “DIS” (
pg. 28,
34 – 36).
36.
————
37.
• Connect the optional
headphones to the headphone
connector (
pg. 86, 87).
• Adjust the sound volume
during playback (
pg. 40).
38.
• Set the POWER Switch to
“
” ( pg. 40).
39.
• Set the POWER Switch to
“
M
E
M
O
R
Y
P
L
A
Y
” ( pg. 45).
40.
• Set the TV to the mode or
channel appropriate for video
playback (
pg. 56, 57).
• Close the cassette holder
cover (
pg. 10).
41.
————
42.
• Turn the speaker volume
down (
pg. 40).
43.
• Set “AV/S-VIDEO” to “OUT”
in the Menu Screen
(
pg. 41).
44.
•Clean the video heads with an
optional cleaning cassette
(
pg. 94).
35.
The LCD monitor or
viewfinder indications blink.
36.
Coloured bright spots appear
all over the LCD monitor or
the viewfinder.
37.
During recording, sound
cannot be heard.
38.
Play, Rewind and Fast-
Forward functions do not
work.
39.
A MultiMediaCard cannot
be played back.
40.
The tape is moving, but
there is no picture.
41.
The LCD monitor image is
distorted.
42.
Images on the LCD monitor
are jittery.
43.
For GR-DVX10 owners:
There is no playback picture
on the connected TV.
44.
Blocks of noise appear
during playback, or there is
no playback picture and the
screen becomes blue.
CONTINUED ON NEXT PAGE
84 EN
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
45.
The LCD monitor, the
viewfinder and the lens have
become dirty
(ex. fingerprints).
46.
An unusual mark appears.
47.
An error indication
(E01 — E06) appears.
48.
The charger indicator on the
AC Power Adapter/Charger
does not light.
49.
Picture does not appear on
the LCD monitor.
50.
When the image is printed
from the printer, a black bar
appears at the bottom of the
screen.
51.
When the camcorder is
connected via the DV
connector, the camcorder
does not operate.
52.
During transport, the lens
cover opens.
53.
The MultiMediaCard cannot
be removed from the
camcorder.
45.
————
46.
————
47.
• A malfunction of some kind
has occurred. In this case the
camcorder’s functions
become unusable.
48.
• The temperature of the battery
is extremely high/low.
• Charging is difficult in places
subject to extremely high/low
temperatures.
49.
• The viewfinder is pulled out.
• The LCD monitor's brightness
setting is too dark.
50.
• This is not a malfunction.
51.
• The DV cable was plugged/
unplugged with power turned
on.
52.
————
53.
————
45.
• Wipe them gently with soft
cloth. Wiping strongly can
cause damage (
pg. 78).
46.
• Check the section of the
manual that explains LCD
monitor/viewfinder indica-
tions (
pg. 88 – 92).
47.
• Remove the power supply
(battery pack, etc.) and wait a
few minutes for the indication
to clear. When it does, you
can resume using the
camcorder.
If the indication remains even
though you repeat the above
two or three times, please
consult your nearest JVC
dealer.
48.
• To protect the battery, it is
recommended to charge it in
places with a temperature of
10°C to 35°C (
pg. 93).
49.
• Push the viewfinder back in.
• Adjust the brightness of the
LCD monitor (
pg. 16).
• If the monitor is tilted upward
180 degrees, open the
monitor fully (
pg. 16).
50.
• By recording with “DIS”
activated (
pg. 28) this can
be avoided.
51.
• Turn the camcorder’s power
off and on again, then operate
it.
52.
• Do not subject the camcorder
to shock or excessive
vibration during transport.
• Turn the camcorder on and
off. The lens cover closes.
53.
• Push in the MultiMediaCard a
few more times (
pg. 12).
TROUBLESHOOTING
(cont.)
EN85
INDEX
Docking Station
1 PC Connector [DIGITAL STILL] ............ pg. 58
2 J Terminal/Edit Connector
[JLIP (Joint Level Interface Protocol)
(EDIT)] ................................................ pg. 71
•Connect to a JLIP-compatible camcorder or
VCR to control it from the computer using the
provided Software.
NOTE:
Make sure that the camcorder is turned on while
connecting the camcorder to a PC using the
Docking Station’s JLIP connector. If the camcorder
is turned off (because the POWER Switch is set to
“OFF” or due to Auto Shut Off* etc.) while the
JLIP programme software is used, it will be
impossible to control the connected devices from
the computer. In such a case, first try turning the
camcorder on again, or unplug the JLIP connec-
tion cable from the Docking Station’s JLIP
connector. Then, initialise or run the software
again.
* Auto Shut Off:
If 5 minutes elapse in the Record-Standby mode
or in the Pause mode, the camcorder’s power
shuts off automatically to conserve energy.
•Connect the editing cable when performing
Random Assemble Editing ......... pg. 70 – 75
5
6
7
1
4
3
!
2
8
9
0
3 PRINTER Connector
Connect to the optional printer equipped with a
PRINT DATA connector. Refer to the separate
“FOR OWNERS OF AN OPTIONAL PRINTER”
instruction sheet.
4 External Stereo Microphone Input
Connector [MIC] ................................. pg. 76
5 Stud .................................................... pg. 56
6 Screw .................................................. pg. 56
7 Multi Connector
The Docking Station can be connected with this
camcorder through this connector. Never touch it
with your hand or hit it with a hard object; if the
pins are damaged, the connectors will become
unusable due to contact failure.
8 S-Video Input/Output Connector (GR-DVX10)
S-Video Output Connector (GR-DVX9)
[S] ................................................. pg. 56, 71
9 Video Input/Output Connector (GR-DVX10)
Video Output Connector (GR-DVX9)
[VIDEO] ........................................ pg. 56, 71
0 Audio Input/Output Connectors (GR-DVX10)
Audio Output Connectors (GR-DVX9)
[AUDIO L/R] ................................. pg. 56, 71
! Screw Knob ......................................... pg. 56
To attach the camcorder, tighten this clockwise.
86 EN
INDEX
Controls, Connectors And Indicators
O
F
O
C
U
S
B
A
C
K
L
I
G
H
T
E
X
P
O
S
U
R
E
1 2 3
4
5
6
7
o
u
i
&
(
*
)
@
!
98 0
#
^
%
$
t
Y
U
R
E
W
e w
QTp
d
s
r
P
a
y
I
q
EN87
Controls
1 PRINT Button
Enables printing using the optional printer
equipped with a PRINT DATA connector. Refer to
the separate “FOR OWNERS OF AN OPTIONAL
PRINTER” instruction sheet.
2 PRINT FRAME Button .......................... pg. 51
3 E-MAIL CLIP REC Button ...................... pg. 44
4 START/STOP Button ............................. pg. 16
5 •Power Zoom Lever [T/W] .................. pg. 20
•Speaker/Headphone Volume Control
[VOL.] .............................................. pg. 40
6 •MENU Wheel [+, –,
4
] ..................... pg. 26
•LCD Monitor Brightness
Control [+, –] .................................... pg. 16
7 Snapshot Button
[SNAPSHOT] ................ pg. 18, 19, 22, 24, 65
8 INDEX Button .......................... pg. 37, 46, 47
9 IMAGE SIZE/RES. Button ...................... pg. 13
0 DIGITAL SOUND Button ............... pg. 37, 77
! Battery Release Switch
[BATT. RELEASE] .................................... pg. 7
@ OPEN/EJECT Switch ............................. pg. 10
# •Play/Pause Button [
4
/6] ................... pg. 40
•EXPOSURE Button ............................ pg. 38
$ •Rewind Button [
2
] ......................... pg. 40
•BACKLIGHT Button .......................... pg. 38
% Stop Button [5] ................................... pg. 40
^ •Fast-Forward Button [
3
] ................. pg. 40
•FOCUS Button .................................. pg. 25
& Operation Switch [ , ] .................. pg. 14
* POWER Switch
[ , ,
M
E
M
O
R
Y
P
L
A
Y
, OFF] ............ pg. 14
( Lock Button ......................................... pg. 14
) MODE Dial
[ , VIDEO,
D
U
A
L
, ] .................. pg. 15
q Dioptre Adjustment Control ................... pg. 8
Connectors
The connectors w to r are located beneath a cover.
w Digital Video Connector
[DV IN/OUT: GR-DVX10,
DV OUT: GR-DVX9]
(i.link*) .............................. pg. 58, 59, 62, 63
* i.Link refers to the IEEE1394-1995 industry
specification and extensions thereof. The logo
is used for products compliant with the i.Link
standard.
e •Audio/Video Output Connector
[AV OUT] ......................................... pg. 56
• Headphone Connector [ ] ............... pg. 76
r Multi Connector
When attached to the Docking Station, this part is
connected.
Indicators
t Tally Lamp ........................................... pg. 16
y POWER Lamp ..................................... pg. 16
Other Parts
u LCD Monitor ................................. pg. 16, 17
i Battery Pack Mount ............................... pg. 7
o Speaker ............................................... pg. 40
p Camera Sensor
Be careful not to cover this area, a sensor
necessary for shooting is built-in here.
Q Stereo Microphone .............................. pg. 76
W Flash Sensor
Be careful not to cover this area, as it contains a
sensor required by the flash.
E Flash ................................................... pg. 30
R Lens
T Lens Protector
When using an optional lens filter (commercially
available), you must first detach the lens cover.
Y Remote Sensor ..................................... pg. 66
U Grip Strap .............................................. pg. 8
I Viewfinder ............................................. pg. 8
O Viewfinder Cleaning Hatch .................. pg. 78
P Memory Card Cover ............................ pg. 12
a Cassette Holder Cover ......................... pg. 10
s Tripod Mounting Socket ......................... pg. 8
d Stud Hole ............................................ pg. 56
88 EN
INDEX
Indications
LCD Monitor/Viewfinder Indications During Video Recording Only
1 Displays the selected Fade/Wipe effect.
( pg. 34, 35)
2 Appears when in the Squeeze, Cinema or PS
Wide mode. ( pg. 28)
3
*
Displays the recording mode (SP or LP).
( pg. 11)
4
*
Displays the tape remaining time. ( pg. 16)
5 •“REC” appears during recording.
•“PAUSE” appears during Record-Standby mode.
( pg. 16)
6 Appears when the wind cut mode is engaged to
cut down on noise created by wind. ( pg. 29)
7 Appears while the tape is running. ( pg. 16)
8 5S MODE/ANIM. MODE: Displays the 5 second
recording mode or Animation recording mode.
( pg. 28, 33)
9 Displays the sound mode for approx. 5 seconds
after turning on the camcorder. ( pg. 27)
0 Displays the Time Code. ( pg. 21, 29)
* Setting “ON SCREEN” to “SIMPLE” in the Menu Screen removes indications marked with * from the screen
(
pg. 29, 41).
1 Displays the Picture Quality/Size mode of the
stored image. There are 4 modes available:
XGA FINE, XGA STD, VGA FINE and VGA STD
(in order of quality). ( pg. 13)
2 Appears and blinks during shooting. ( pg. 19)
3 •Appears during shooting.
•Blinks when a MultiMediaCard is not loaded.
( pg. 19)
4 Displays the number of images that have already
been shot. ( pg. 19)
5 Displays the total number of shots that can
be stored, including those already taken.
( pg. 19)
LCD Monitor/Viewfinder Indications During D.S.C. Recording Only
TC
2
A
S
3
N
O
:
I
U
2
M
N
5
.
D
MO
1
D
2
E
BIT
SP
35
R
4
E
4
C
4
0 9 8
1
2
3
*
4
*
7 6
5
XGA
STD
10/24
4 52 31
These indications also appear during DUAL mode.
EN89
LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording
F
P
.
S
2
A
4
U
0
P
T
x
3
H
B
O
O
R
W
T
I
E
O
G
X
H
P
T
L
T
OS I ON
1.
1
1
2
.
:
0
0
0
0
1
*
2
3
4
6
8
5
7
9
#
%
^
$
*
&
0 ! @
1
*
Appears when the Operation switch
is set to “ ”.( pg. 14)
2 Displays the shooting mode position. ( pg. 15)
3 Appears when backlight compensation is used.
( pg. 38)
4 Appears when “FLASH” is set to “AUTO ” in
the Menu Screen. ( pg. 30)
5 Appears when the white balance is adjusted.
( pg. 39)
6 Appears when the exposure is adjusted.
( pg. 38)
7 Displays the selected Programme AE with special
effects. ( pg. 36)
8 Appears when Digital Image Stabiliser (“DIS”) is
engaged. ( pg. 28)
9 Appears when the focus is adjusted manually.
( pg. 25)
0 • Approximate zoom ratio: Appears during
zooming. ( pg. 20)
• : Appears when “GAIN UP” is set to
“AUTO” and the shutter speed is automatically
adjusted. ( pg. 27)
! Appears during zooming.
Zoom level indicator ( pg. 20)
@ Displays the selected Digital Sound Effect.
( pg. 37)
# Appears when the flash is ready. A number
appears next to the indication after adjusting
the brightness of the flash. ( pg. 30, 31)
$ Appears when taking a Snapshot. ( pg. 18, 19)
% Appears when the iris is locked. ( pg. 38)
^ Appears during Self-Timer recording. ( pg. 32)
& Displays the brightness of the LCD monitor or the
viewfinder. ( pg. 16)
* Displays the date/time. ( pg. 9)
* Setting “ON SCREEN” to “SIMPLE” in the Menu Screen removes indications marked with * from the screen
(
pg. 29, 41).
90 EN
INDEX
Indications (cont.)
LCD Monitor/Viewfinder Indications During Video Playback
1 Displays the sound mode. ( pg. 41, 42)
2 Displays the selected Digital Sound Effect.
( pg. 37)
3 Displays the tape speed. ( pg. 11)
4 Appears while a tape is running.
4
: Playback
3
: Fast-Forward/Shuttle search
2
: Rewind/Shuttle search
6 : Pause
6
4
: Forward slow-motion
1
6 : Reverse slow-motion
e : Audio Dubbing
6e : Audio Dubbing Pause
5 Displays the Blank Search mode. ( pg. 43)
6 Displays the date/time. ( pg. 41, 42)
7 BRIGHT :
Displays the brightness of the LCD
monitor or the viewfinder.
( pg. 16)
VOLUME : Displays the speaker or headphone
volume. ( pg. 40)
The level indicator moves.
8 Displays the time code. ( pg. 41, 42)
1
L
T
2
C
BI
1
T
0
/
B
V
:
S
L
O
0
O
E
A
L
6
U
X
N
U
:
N
P
K
M
2
D
L
E
0
1
O
S
S
E
I
A
O
R
N
C
1
L
H
.
P
1
1
2
.
:
4
0
0
0
0
8 7
1 32 4 5
6
LCD Monitor/Viewfinder Indications During D.S.C. Playback
1 Displays the type of file (IMAGE/E-MAIL CLIP/
SOUND).
2 Displays the directory and file names. ( pg. 45)
3 Displays the brightness of the LCD monitor or the
viewfinder. ( pg. 16)
The level indicator moves.
4 Displays the total number of stored files.
( pg. 45)
5 Displays the index number of the file. ( pg. 45)
IM
1
A
0
G
B
/
E
R
2
I
4
GHT
100
–
0001
5 3
1 2
4
EN91
Indications Function
Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator blinks.
When the battery power is exhausted, power turns off automatically.
Appears when no tape is loaded. ( pg. 10)
Appears when the erase protection tab is set to “SAVE” while the POWER
Switch is set to “ ”.( pg. 10)
Appears if dirt is detected on the heads during recording. Use an optional
cleaning cassette. ( pg. 94)
Appears if condensation occurs. When this indication is displayed, wait
more than 1 hour until condensation disappears.
Appears if a tape is not loaded when START/STOP is pressed while the
POWER Switch is set to “ ” and the MODE Dial is set to “VIDEO”,
“ ” or “
D
U
A
L
”.
Appears when the tape ends during recording or playback. ( pg. 17)
Appears if a tape in another format is loaded.
● Appears when the date/time is not set. ( pg. 9)
● Appears when the built-in clock (lithium) battery is discharged and the
previously set date/time is erased. ( pg. 9)
Appears if Audio Dubbing is attempted on a blank portion of a tape.
( pg. 76)
● Appears if Audio Dubbing is attempted on a tape recorded in the LP
mode. ( pg. 76)
● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit
audio. ( pg. 76)
● Appears if A. DUB (e) on the remote control is pressed when the erase
protection tab is set to “SAVE”.( pg. 76)
Appears when the MultiMediaCard’s memory is full and shooting is not
possible.
Warning Indications
TAPE!
TAPE END
SET DATE/TIME!
MEMORY IS FULL
CHECK TAPE’S ERASE
PROTECTION SWITCH
HEAD CLEANING
REQUIRED USE
CLEANING CASSETTE
CONDENSATION
OPERATION PAUSED
PLEASE WAIT
DIFFERENT
FORMATTED TAPE
A. DUB ERROR!
<CANNOT DUB
ON A LP RECORDED
TAPE>
<CANNOT DUB
ON A 16BIT
RECORDING>
<CHECK TAPE’S ERASE
PROTECTION SWITCH>
A. DUB ERROR!
CONTINUED ON NEXT PAGE
92 EN
Indications Function
● Appears if dubbing of copyguarded signals is attempted while this
camcorder is being used as a recorder (GR-DVX10 only).
● Appears in the following cases when dubbing from a tape to a
MultiMediaCard (as digital stills or video clips):
– when no MultiMediaCard is loaded.
– when the MultiMediaCard's memory is full.
– when the MultiMediaCard is not formatted.
● Appears in the following cases when dubbing still images or sound effects
stored in the MultiMediaCard’s memory to a tape:
– when condensation occurs.
– when no tape is loaded.
– when the erase protection tab is set to “SAVE”.
– when a tape in another format is loaded.
– when the tape ends. ( pg. 64)
Appears if a MultiMediaCard is not loaded when SNAPSHOT is pressed
while the POWER Switch is set to “ ” and the MODE Dial is set to
“ ” or “
D
U
A
L
”.
Appears when there is a problem with a MultiMediaCard and its memory is
corrupt, or it has not been initialised. Initialise the MultiMediaCard.
( pg. 50)
Appears when the POWER Switch is set to “
M
E
M
O
R
Y
P
L
A
Y
” and there are no files
stored in the MultiMediaCard.
Appears if there are no sound files stored in the MultiMediaCard when
DIGITAL SOUND is pressed.
Appears when the POWER switch is set to “
M
E
M
O
R
Y
P
L
A
Y
” and all image files are
deleted.
Appears when the POWER switch is set to “
M
E
M
O
R
Y
P
L
A
Y
” and all E-clip recording
files are deleted.
Appears when a file in a format other than MP3 is selected.
The error indications (E01 — E06) show what type of malfunction has
occured. When an error indication appears, the camcorder turns off
automatically. Remove the power supply (battery, etc.) and wait a few
minutes for the indication to clear. When it does, you can resume using the
camcorder. If the indication remains, consult your nearest JVC dealer.
NO STORED
DATA
PLEASE
FORMAT
MEMORY CARD!
E01 — E06
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY
COPYING FAILED
INDEX
Indications (cont.)
NO SOUND DATA
NO STORED IMAGE
NO E-CLIP DATA
UNSUPPORTED DATA
EN93
General Battery Precautions
If the remote control is not functioning even if it is
being operated correctly, the batteries are ex-
hausted. Replace them with fresh ones.
Use only the following batteries: AAA (R03) size x 2
Please make note of the following rules for battery
use. When misused, the batteries can leak or
explode.
1. When replacing batteries, refer to page 66.
2. Do not use any different size of batteries from those
specified.
3. Be sure to install batteries in the correct direction.
4. Do not use rechargeable batteries.
5. Do not expose the batteries to excessive heat as
they can leak or explode.
6. Do not dispose of the batteries in a fire.
7. Remove the batteries from the unit if it is to be
stored for an extended period to avoid battery
leakage which can cause malfunctions.
CAUTIONS
Battery Packs
The supplied battery pack is
a lithium-ion battery. Before
using the supplied battery
pack or an optional battery
pack, be sure to read the
following cautions:
1. To avoid hazards . . .
.... do not burn.
.... do not short-circuit the terminals.
.... do not modify or disassemble.
.... do not expose the battery to temperatures
exceeding 60°C, as this may cause the battery
to overheat, explode or catch fire.
.... use only specified chargers.
2. To prevent damage and prolong service life . . .
.... do not subject to unnecessary shock.
.... charge in an environment where temperatures
are within the tolerances shown in the chart
below. This is a chemical reaction type
battery—cooler temperatures impede chemical
reaction, while warmer temperatures can
prevent complete charging.
.... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
.... fully charge and then fully discharge the
battery every 6 months when storing the
battery pack over a long period time.
.... remove from charger or powered unit when
not in use, as some machines use current even
when switched off.
NOTES:
●
It is normal for the battery pack to be warm after
charging, or after use.
Temperature Range Specifications
Charging ........................... 10
°
C to 35
°
C
Operation ......................... 0
°
C to 40
°
C
Storage ............................. –10
°
C to 30
°
C
●
Recharging time is based on room temperature of
20
°
C.
●
The lower the temperature, the longer recharging
takes.
Terminals
94 EN
CAUTIONS
(cont.)
Cassettes
To properly use and store your cassettes, be sure to
read the following cautions:
1. During use . . .
.... make sure the cassette bears the Mini DV mark.
.... be aware that recording onto prerecorded
tapes automatically erases the previously
recorded video and audio signals.
.... make sure the cassette is positioned properly
when inserting.
.... do not load and unload the cassette
repeatedly without allowing the tape to run at all.
This slackens the tape and can result in damage.
.... do not open the front tape cover. This exposes
the tape to fingerprints and dust.
2. Store cassettes . . .
.... away from heaters or other heat sources.
.... out of direct sunlight.
.... where they won’t be subject to unnecessary
shock or vibration.
.... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
.... vertically, in their original cases.
MultiMediaCards
To properly use and store your MultiMediaCards, be
sure to read the following cautions:
1. During use . . .
.... make sure the MultiMediaCard bears the
MultiMediaCard mark.
.... make sure the MultiMediaCard is positioned
properly when inserting.
2. While the MultiMediaCard is being accessed (during
recording, playback, deletion, initialisation, etc.) . . .
.... never unload the MultiMediaCard and never
turn off the camcorder.
3. Store MultiMediaCards . . .
.... away from heaters or other heat sources.
.... out of direct sunlight.
.... where they won’t be subject to unnecessary
shock or vibration.
.... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
LCD Monitor
1. To prevent damage to the LCD monitor,
DO NOT . . .
.... push it strongly or apply any shocks.
.... place the camcorder with the LCD monitor on
the bottom.
2. To prolong service life . . .
.... avoid rubbing it with coarse cloth.
3. Be aware of the following phenomena for LCD
monitor use.
These are not malfunctions:
•While using the camcorder, the surface around
the LCD monitor and/or the back of the LCD
monitor may heat up.
•If you leave power on for a long time, the
surface around the LCD monitor becomes hot.
Main Unit
1. For safety, DO NOT . . .
.... open the camcorder’s chassis.
.... disassemble or modify the unit.
.... short-circuit the terminals of the battery pack.
Keep it away from metallic objects when not in
use.
.... allow inflammables, water or metallic objects
to enter the unit.
.... remove the battery pack or disconnect the
power supply while the power is on.
.... leave the battery pack attached when the
camcorder is not in use.
2. Avoid using the unit . . .
.... in places subject to excessive humidity or dust.
.... in places subject to soot or steam such as near
a cooking stove.
.... in places subject to excessive shock or vibration.
.... near a television set.
.... near appliances generating strong magnetic or
electric fields (speakers, broadcasting antennas,
etc.).
.... in places subject to extremely high (over 40°C)
or extremely low (under 0°C) temperatures.
3. DO NOT leave the unit . . .
.... in places of over 50°C.
.... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
.... in direct sunlight.
.... in a closed car in summer.
.... near a heater.
EN95
Serious malfunctioning
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
The camcorder is a microcomputer-controlled
device. External noise and interference (from a
TV, a radio, etc.) might prevent it from function-
ing properly. In such cases, first disconnect its
power supply unit (battery pack, AC Power
Adapter/Battery Charger, etc.) and wait a few
minutes and then re-connect it and proceed as
usual from the beginning.
About moisture condensation . . .
● You have observed that pouring a cold liquid
into a glass will cause drops of water to form
on the glass‘ outer surface. This same
phenomenon occurs on the head drum of a
camcorder when it is moved from a cool
place to a warm place, after heating a cold
room, under extremely humid conditions or
in a place directly subjected to the cool air
from an air conditioner.
● Moisture on the head drum can cause severe
damage to the video tape, and can lead to
internal damage to the camcorder itself.
How To Handle A CD-ROM
•Take care not to soil or scratch the mirror surface
(opposite to the printed surface). Do not write
anything or put a sticker on either the front or
back surface. If the CD-ROM gets dirty, gently
wipe it with a soft cloth outward from the centre
hole using a circular motion.
•Do not use conventional disc cleaners or cleaning
spray.
•Do not bend the CD-ROM or touch its mirror
surface.
•Do not store your CD-ROM in a dusty, hot or
humid environment. Keep it away from direct
sunlight.
4. To protect the unit, DO NOT . . .
.... allow it to become wet.
.... drop the unit or strike it against hard objects.
.... subject it to shock or excessive vibration
during transportation.
.... keep the lens directed at extremely bright
objects for long periods.
.... expose the lens to direct sunlight.
.... carry it by holding the LCD monitor or the
viewfinder.
.... swing it excessively when using the hand strap
or the grip.
.... swing the soft camera case excessively when
the camcorder is inside it.
5. Dirty heads can cause the following problems:
• No picture during playback.
• Blocks of noise appear during playback.
• During recording, the Head Clog Warning
indicator “ ” appears.
In such cases, use an optional cleaning cassette.
Insert it and play back. If the cassette is used
more than once consecutively, damage to the
video heads may result. After the camcorder
plays back for about 20 seconds, it stops
automatically. Also refer to the cleaning cassette’s
instructions.
If, after using the cleaning cassette, the problems
still exist, consult your nearest JVC dealer.
Mechanical moving parts used to move the video
heads and video tape tend to become dirty and
worn out over time. In order to maintain a clear
picture at all times, periodic check-ups are
recommended after using the unit for about
1,000 hours. For periodic check-ups please
consult your nearest JVC dealer.
96 EN
TERMS
F
Fade-In/Out ........................................ pg. 34, 35
Fast-Forward The Tape .............................. pg. 40
5-second recording mode ......................... pg. 33
Flash .................................................. pg. 30, 31
Frame-By-Frame Playback .................. pg. 40, 68
G
Gain Up ................................................... pg. 27
Grip Adjustment ......................................... pg. 8
I
Icons ................................................ pg. 27 – 29
Index Playback ......................................... pg. 47
Index Screen ............................................ pg. 46
Initialise A MultiMediaCard ...................... pg. 50
Iris............................................................ pg. 38
Iris Lock ................................................... pg. 38
J
Journalistic Shooting ................................. pg. 17
L
LCD monitor/Viewfinder
Indications ..................................... pg. 88 – 92
Load A Tape ............................................. pg. 10
M
Manual Focus........................................... pg. 25
Menu Screen, CAMERA MENU ................. pg. 27
Menu Screen, DISPLAY MENU ........... pg. 29, 41
Menu Screen, MANUAL MENU.......... pg. 28, 29
Menu Screen, MEMORY MENU ............... pg. 48
Menu Screen, VIDEO MENU .................... pg. 41
MODE Dial Position ................................. pg. 15
Monotone ................................................ pg. 36
Motor Drive Mode.................................... pg. 18
MultiMediaCard ................................. pg. 12, 94
O
Operation Switch Position ........................ pg. 14
A
AC Power Adapter/Charger ..................... pg. 6, 7
Analogue Input ................................... pg. 41, 61
Animation ................................................ pg. 33
Audio Dubbing ........................................ pg. 76
Auto Date................................................. pg. 29
Auto Focus ............................................... pg. 25
Auto Playback .......................................... pg. 45
Auto Shut off ................................ pg. 17, 19, 40
B
Backlight Compensation ........................... pg. 38
Battery Low .............................................. pg. 91
Battery Pack ..................................... pg. 6, 7, 93
Beep/Tally ................................................ pg. 27
Blank Search ............................................ pg. 43
Brighten The LCD Monitor ........................ pg. 16
Built-in Clock’s Lithium Battery ................... pg. 9
C
Channels (Left/Right) ................................. pg. 42
Charge The Battery Pack ............................. pg. 6
Cinema .................................................... pg. 28
Classic Film .............................................. pg. 36
Clean The Camcorder ............................... pg. 78
Connections ............................ pg. 7, 56 – 63, 71
D
Darken The LCD Monitor ......................... pg. 16
Date/Time Display ........................ pg. 29, 41, 42
Date/Time Settings ...................................... pg. 9
Deleting Files ........................................... pg. 49
Demonstration Mode ............................ pg. 5, 28
Digital Sound Effect .................................. pg. 37
Digital Zoom ...................................... pg. 20, 27
DIS (Digital Image Stabiliser) ..................... pg. 28
Dioptre Adjustment .................................... pg. 8
DPOF (Digital Print Order Format) ............ pg. 54
Dual Shooting ......................................... pg. 24
Dubbing ........................................... pg. 60 – 65
E
E-Mail Clip Recording ............................... pg. 44
Erase Protection ........................................ pg. 10
Exposure Control ...................................... pg. 38
EN97
P
Picture Quality/Size Mode ........................ pg. 13
Picture Wipe/Dissolve ......................... pg. 34, 35
Playback Special Effects ............................ pg. 69
Playback Zoom ........................................ pg. 68
POWER Switch Position ........................... pg. 14
Print Frame Deletion ........................... pg. 52, 53
Printer ...................................................... pg. 59
Programme AE With Special Effects ........... pg. 36
Progressive Mode ............................... pg. 22, 23
Progressive Wide ...................................... pg. 28
Protecting Files ......................................... pg. 48
Provided Accessories .................................. pg. 4
R
Random Assemble Editing ................. pg. 70 – 75
Record-Standby ........................................ pg. 16
Recording Mode ....................................... pg. 11
Red-Eye Reduction ................................... pg. 30
Remote Control ........................................ pg. 66
Rewind The Tape ...................................... pg. 40
S
Self-Recording .......................................... pg. 17
Self-Timer ................................................. pg. 32
Sepia ........................................................ pg. 36
Set Remote Control/VCR Code .................. pg. 70
Shooting Mode, DUAL ............................ pg. 15
Shooting Mode, DSC ................................ pg. 15
Shuttle Search ........................................... pg. 40
Shutter Speed ........................................... pg. 36
Slow-Motion Playback .............................. pg. 68
Slow Shutter ............................................. pg. 36
Snapshot ...................................... pg. 18, 19, 24
Snapshot Mode .................................. pg. 18, 19
Sound Mode ................................. pg. 27, 41, 42
Speaker Volume ....................................... pg. 40
Specifications ..................................... pg. 98, 99
Squeeze ................................................... pg. 28
Still Playback ............................................ pg. 40
Strobe ...................................................... pg. 36
Superimposing A Print Frame .................... pg. 51
T
Tele Macro ............................................... pg. 28
Time Code.............................. pg. 21, 29, 41, 42
Tripod Mounting ......................................... pg. 8
Twilight .................................................... pg. 36
U
Unload A Tape ......................................... pg. 10
V
Video Echo ............................................... pg. 36
W
White Balance .......................................... pg. 39
Wide Mode .............................................. pg. 28
Wind Cut ................................................. pg. 29
Wipe In/Out ....................................... pg. 34, 35
Z
Zooming .................................................. pg. 20
98 EN
SPECIFICATIONS
Camcorder
For General
Power supply : DC 6.3 V (Using AC Power Adapter/Charger)
DC 7.2 V (Using battery pack)
Power consumption
LCD monitor off, viewfinder on
GR-DVX10 : Approx. 4.9 W
GR-DVX9 : Approx. 4.6 W
LCD monitor on, viewfinder off
GR-DVX10 : Approx. 5.8 W
GR-DVX9 : Approx. 5.5 W
Dimensions (W x H x D) : 51 mm x 125 mm x 97 mm
(with the LCD monitor closed and the viewfinder pushed back in)
Weight : Approx. 515 g (without cassette, MultiMediaCard and battery)
Approx. 590 g (incl. cassette, MultiMediaCard and battery)
Operating temperature :0°C to 40°C
Operating humidity : 35% to 80%
Storage temperature : –20°C to 50°C
Pickup : 1/4" CCD (Progressive Scan)
Lens : F 1.8, f = 3.8 mm to 38 mm, 10:1 power zoom lens
Filter diameter : ø27 mm
LCD monitor : 2.5" diagonally measured, LCD panel/TFT active matrix system
Viewfinder : Electronic viewfinder with 0.44" colour LCD
Speaker : Monaural
For Digital Video Camera
Format : DV format (SD mode)
Signal format : PAL standard
Recording/Playback format : Video: Digital component recording
: Audio: PCM digital recording, 32 kHz 4-channel (12-bit),
48 kHz 2-channel (16-bit)
Cassette : Mini DV cassette
Tape speed : SP: 18.8 mm/s
LP: 12.5 mm/s
Maximum recording time : SP: 80 min.
(using 80 min. cassette) LP: 120 min.
For Digital Still Camera
Storage media : MultiMediaCard
Compression system : JPEG (compatible)
File size : 2 modes (XGA: 1024 x 768 pixels/VGA: 640 x 480 pixels)
Picture quality : 2 modes (FINE/STANDARD)
Approximate number of storable images
(with the provided MultiMediaCard [8 MB], with Sound Effects pre-stored)
FINE : 46 (VGA), 21 (XGA)
STANDARD : 133 (VGA), 64 (XGA)
(with an optional MultiMediaCard [4 MB])
FINE : 26 (VGA), 12 (XGA)
STANDARD : 76 (VGA), 36 (XGA)
(with an optional MultiMediaCard [8 MB])
FINE : 54 (VGA), 24 (XGA)
STANDARD : 155 (VGA), 75 (XGA)
EN99
For Connectors
Video output :1 V
(
p-p
)
, 75 Ω, analogue
Audio output : 300 mV (rms), 1 kΩ, analogue, stereo
DV
Input/output (GR-DVX10 only) : 4-pin, IEEE 1394 compliant
Output (GR-DVX9 only) : 4-pin, IEEE 1394 compliant
Headphone output : ø3.5 mm, stereo
AC Power Adapter/Charger AA-V51EG or AA-V51EK
Power requirement : AC 110 V to 240 V`, 50 Hz/60 Hz
Power consumption : 23 W
Output
Charge : DC 7.2 V , 0.77 A
VTR : DC 6.3 V , 1.8 A
Dimensions (W x H x D) : 68 mm x 45 mm x 110 mm
Weight
AA-V51EG : Approx. 255 g
AA-V51EK : Approx. 330 g
Docking Station CU-V502E
For General
Dimensions (W x H x D) : 55 mm x 36 mm x 107 mm
Weight : Approx. 89.9 g
For Connectors
S
Output :Y:1 V
(
p-p
)
, 75 Ω, analogue
C : 0.29 V
(
p-p
)
, 75 Ω, analogue
Input (GR-DVX10 only) : Y : 0.8 V
(
p-p
)
– 1.2 V
(
p-p
)
, 75 Ω, analogue
C : 0.2 V
(
p-p
)
– 0.4 V
(
p-p
)
, 75 Ω, analogue
VIDEO
Video output :1 V
(
p-p
)
, 75 Ω, analogue
Video input (GR-DVX10 only) : 0.8 V
(
p-p
)
– 1.2 V
(
p-p
)
, 75 Ω, analogue
AUDIO
Audio output : 300 mV (rms), 1 kΩ, analogue, stereo
Audio input (GR-DVX10 only) : 300 mV (rms), 50 kΩ, analogue, stereo
JLIP (EDIT) : ø3.5 mm, 4-pole, mini-head jack (compatible with RC-5325 plug)
PC (DIGITAL STILL) : ø2.5 mm, 3-pole
External microphone input : 506 µV (rms), high impedance unbalanced with ø3.5 mm (stereo)
PRINTER : For an optional video printer equipped with a PRINT DATA
connector
Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject
to change without notice.
COPYRIGHT© 2000 VICTOR COMPANY OF JAPAN, LTD.
Printed in Japan
0600FOV
*
UN
*
VP
VICTOR COMPANY OF JAPAN, LIMITED
EN
GR-DVX10
GR-DVX9
EG/EK
1 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC GR-DVX9 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC GR-DVX9 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van JVC GR-DVX9

JVC GR-DVX9 Gebruiksaanwijzing - Nederlands - 100 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info