533227
1
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
Please visit our Homepage on the World Wide Web for Digital
Video Camera:
http://www.jvc-victor.co.jp/english/cyber/
For Accessories:
http://www.jvc-victor.co.jp/english/accessory/
INSTRUCTIONS
DIGITAL VIDEO CAMERA
ENLYT1098-001A
ENGLISH
CONTENTS
AUTOMATIC
DEMONSTRATION
6
GETTING STARTED 7 – 10
TAPE
RECORDING &
PLAYBACK
11 – 15
ADVANCED
FEATURES
16 – 33
REFERENCES 34 – 47
GR-D50
GR-D40
GR-D30
GR-D20
01 D50/40/30/20EK 01-10 02.12.4, 19:071
EN
2
CONTENTS
None
Refer to the diagrams on page 40 and 42 while reading the instruction manual as all the controls,
connectors, indicators and indications are numbered on the diagrams and those corresponding
numbers are used throughout this manual unless specified.
GETTING STARTED
Power ............................................................ 7 – 8
Grip Adjustment ...................................................... 8
Viewfinder Adjustment ............................................. 8
Shoulder Strap Attachment ......................................... 9
Tripod Mounting ...................................................... 9
Loading/Unloading A Cassette ............................... 9 – 10
Date/Time Settings................................................. 10
Recording Mode Setting ............................................ 10
TAPE RECORDING & PLAYBACK
TAPE RECORDING .................................. 11 – 13
Basic Recording ........................................... 11 – 12
Zooming .......................................................... 12
Time Code ........................................................ 13
TAPE PLAYBACK .................................... 13 – 15
Normal Playback ......................................... 13 – 14
Blank Search ..................................................... 14
Connections ...................................................... 15
ADVANCED FEATURES
FOR RECORDING ..................................... 16 – 20
Night-Scope ...................................................... 16
Programme AE With Special Effects........................... 16
Fade/Wipe Effects .............................................. 17
SAFETY PRECAUTIONS 3
SOME DOS AND DONTS ON THE
SAFE USE OF EQUIPMENT 4
PROVIDED ACCESSORIES 5
HOW TO ATTACH THE LENS CAP 5
HOW TO ATTACH THE CORE FILTER 6
AUTOMATIC DEMONSTRATION 6
Snapshot (For Tape Recording) ................................ 18
Auto Focus ........................................................ 18
Manual Focus .................................................... 19
Exposure Control ................................................ 19
Iris Lock ........................................................... 20
White Balance Adjustment ..................................... 20
Manual White Balance Operation ............................. 20
USING MENUS FOR DETAILED ADJUSTMENT .... 21 – 25
For Recording Menu ...................................... 21 – 24
For Playback Menu ....................................... 24 – 25
DUBBING .............................................. 26 – 27
Dubbing To Or From A VCR .................................... 26
Dubbing To Or From A Video Unit Equipped
With A DV Connector (Digital Dubbing) .................... 27
USING THE REMOTE CONTROL UNIT .............. 28 – 32
Slow-Motion Playback .......................................... 28
Frame-By-Frame Playback ..................................... 28
Playback Special Effects ........................................ 28
Playback Zoom .................................................. 28
Audio Dubbing ................................................... 29
Insert Editing ..................................................... 29
Random Assemble Editing [R.A.Edit] .................. 30 – 32
For More Accurate Editing ...................................... 32
SYSTEM CONNECTIONS ................................... 33
Connection To A Personal Computer .......................... 33
REFERENCES
TROUBLESHOOTING ................................. 34 – 36
CAUTIONS ............................................ 37 – 38
SPECIFICATIONS............................................ 39
INDEX ................................................. 40 – 45
Controls, Connectors And Indicators ................... 40 – 41
Indications ................................................. 42 – 44
Using The Optional RM-V717U Remote Control Unit ...... 45
TERMS ................................................. 46 – 47
01 D50/40/30/20EK 01-10 02.12.4, 19:072
EN
3
NoneNone
NOTES:
The rating plate (serial number plate) and safety caution
are on the bottom and/or the back of the main unit.
The rating information and safety caution of the AC
Adapter are on its upper and lower sides.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
Dear Customer,
Thank you for purchasing this digital video camera. Before use, please read the safety information and
precautions ( pgs. 3 and 4) to ensure safe use of this product.
SAFETY PRECAUTIONS
CAUTIONS:
To prevent shock, do not open the cabinet. No user
serviceable parts inside. Refer servicing to qualified
personnel.
When you are not using the AC Adapter for a long
period of time, it is recommended that you disconnect
the power cord from AC outlet.
CAUTION:
To avoid electric shock or
damage to the unit, first firmly
insert the small end of the power
cord into the AC Adapter until it
is no longer wobbly, and then plug the larger end
of the power cord into an AC outlet.
Connection to the mains supply in the United
Kingdom.
DO NOT cut off the mains plug from this equipment.
If the plug fitted is not suitable for the power points in
your home or the cable is too short to reach a power
point, then obtain an appropriate safety approved
extension lead or consult your dealer.
BE SURE to replace the fuse only with an identical
approved type, as originally fitted, and to replace
the fuse cover.
If nonetheless the mains plug is cut off be sure to
remove the fuse and dispose of the plug immediately,
to avoid possible shock hazard by inadvertent
connection to the mains supply.
If this product is not supplied fitted with a mains plug
then follow the instructions given below:
DO NOT make any connection to the Larger Terminal
coded E or Green.
The wires in the mains lead are coloured in accord-
ance with the following code:
Blue to N (Neutral) or Black
Brown to L (Live) or Red
If these colours do not correspond with the terminal
identifications of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt — consult a competent electrician.
IMPORTANT
Caution on Replaceable lithium battery
The battery used in this device may present a fire or
chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C or
incinerate.
Replace battery with Panasonic (Matsushita Electric),
Sanyo, Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is
incorrectly replaced.
Dispose of used battery promptly.
Keep away from children.
Do not disassemble and do not dispose of in fire.
When the equipment is installed in a cabinet or on a
shelf, make sure that it has sufficient space on all
sides to allow for ventilation (10 cm or more on both
sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or
cloth etc. the heat may not be able to get out.)
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental problems
must be considered and the local rules or laws
governing the disposal of these batteries must be
followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or places
with water.
Also do not place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases,
potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment,
fire or electric shock may be caused.)
CAUTIONS:
This camcorder is designed to be used with PAL-type
colour television signals. It cannot be used for
playback with a television of a different standard.
However, live recording and LCD monitor/viewfinder
playback are possible anywhere.
Use the JVC BN-V408U/V416U/V428U battery packs
and, to recharge them or to supply power to the
camcorder from an AC outlet, use the provided multi-
voltage AC Adapter and Power Cord. (An appropriate
conversion adapter may be necessary to accommo-
date different designs of AC outlets in different
countries.)
01 D50/40/30/20EK 01-10 02.12.4, 19:073
EN
4
None
Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the
malfunctioning of internal circuitry. There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical damage to the camcorder and to the user.
When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or holding the
camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction.
Take care not to get your finger caught in the cassette holder cover. Do not let children operate the camcorder,
as they are particularly susceptible to this type of injury.
Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder.
CAUTION!
Connecting cables (Audio/Video, S-Video, etc.) to the camcorder and leaving the unit on top of the TV is not
recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage.
SOME DOS AND DONTS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards but, like any
electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and interconnections
between pieces of equipment) are properly made and in accordance with the manufacturers instructions.
Switch off and withdraw the mains plug when making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in
any way switch off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for
unattended operation or has a standby mode. Switch off using the switch on the equipment and make
sure that your family knows how to do this. Special arrangements may need to be made for infirm or
handicapped people.
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of
road safety. It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will
cause damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood screws to ensure complete safety always fit the
manufacturers approved stand or legs with the fixings provided according to the instructions.
DON’T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
NEVER let anyone especially children push anything into holes, slots or any other opening in the case this
could result in a fatal electrical shock;
NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry!
This camcorder is designed exclusively for the digital video cassette. Only cassettes marked
can be used with this unit.
Before recording an important scene . . .
..... make sure you only use cassettes with the Mini DV mark .
..... remember that this camcorder is not compatible with other digital video formats.
..... remember that this camcorder is intended for private consumer use only. Any commercial use
without proper permission is prohibited. (Even if you record an event such as a show, performance or
exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)
01 D50/40/30/20EK 01-10 02.12.4, 19:084
EN
5
NOTE:
In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core
filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
Audio/Video Cable
(ø3.5 mini-plug to
RCA plug)
Shoulder Strap
USB Cable
(GR-D50/D40 only)
Battery Pack BN-V408U
AC Adapter AP-V11E or AP-V13E
Lens Cap
(See below for
attachment)
PROVIDED ACCESSORIES
CD-ROM
(GR-D50/D40 only)
Power Cord
Cable Adapter
Remote
Control Unit*
RM-V718U
Lithium Battery*
CR2025
(for remote
control unit)
To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.
NOTE:
To confirm the lens cap is on correctly make sure the cap is flush to the camera.
HOW TO ATTACH THE LENS CAP
1 Make sure the arrow (
) is
pointing upward.
Arrow
23
Core Filter x 2 (for
optional S-Video Cable
and Editing Cable
provided with Remote
Control kit RM-V717KITU
pg. 6 for attachment)
9
0
2
3
4
6
we
5
T
W
None
2
3
4
11
Pull out by inserting
a pointed instrument
into the slot.
Slot
* A battery is pre-installed in the Remote Control Unit
a time of shipment (with insulation sheet). To use the
Remote Control Unit, remove the insulation sheet.
or
01 D50/40/30/20EK 01-10 02.12.13, 9:215
EN
6
Automatic Demonstration takes place when
DEMO MODE is set to ON (factory-preset).
Automatic Demonstration starts when there is no operation for
about 3 minutes after the Power Switch y is set to or “
and no cassette is in the camcorder.
Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will resume.
“DEMO MODE” remains “ON” even if the camcorder power is
turned off.
To cancel Automatic Demonstration:
1. Set the Power Switch y to “ while pressing down the Lock
Button t located on the switch and press the MENU/VOLUME
wheel $ in. The Menu Screen appears.
2. Rotate the MENU/VOLUME wheel $ to select “ (SYSTEM)”
and press it.
3. Rotate the MENU/VOLUME wheel $ to select “DEMO MODE”
and press it. The Sub Menu appears.
4. Rotate the MENU/VOLUME wheel $ to select “OFF” and press
it.
5. Rotate the MENU/VOLUME wheel $ to select “ RETURN”,
and press it twice. The normal screen appears.
NOTE:
If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on
the LCD monitor or viewfinder.
AUTOMATIC DEMONSTRATION
None
RETURN
OFF
ON
EMO MODED
SYSTE
M
y
$
t
Sub Menu
Attach the Core Filter(s) (if provided with your model pg. 5) to an optional cable(s). The Core Filter reduces
interference.
HOW TO ATTACH THE CORE FILTER
12 3
Release the
stoppers on both
ends of the Core
Filter.
Run the cable through the Core Filter, leaving approx. 3 cm
of cable between the cable plug and the Core Filter. Wind
the cable once around the outside of the Core Filter as
shown in the illustration.
Wind the cable so that it is not slack.
NOTE:
Take care not to damage the cable.
Close the Core Filter until it
clicks shut.
3 cm
Stopper
When connecting cables, attach the end with the Core Filter to the camcorder.
Be sure to use a cable with a thickness that will allow it to be wound around the core filter.
Wind once
01 D50/40/30/20EK 01-10 02.12.13, 9:216
EN
7
yr@
p
Battery pack
BN-V408U
BN-V416U (optional)
BN-V428U (optional)
Charging time
approx. 1 hr. 30 min.
approx. 3 hrs.
approx. 5 hrs.
Power
CHARGING THE BATTERY PACK
1 With the arrow on the battery pack pointing upward,
push the battery pack slightly against the battery pack
mount @, then slide up the battery pack until it locks in
place.
2 Set the Power Switch y to OFF (CHARGE).
Connect the AC Adapter to the camcorder, then
connect the Power Cord to the AC Adapter.
3 Plug the Power Cord into an AC outlet. The
POWER/CHARGE lamp r on the camcorder blinks to
indicate charging has started.
4 When the POWER/CHARGE lamp r goes off,
charging is finished. Unplug the Power Cord from the
AC outlet. Disconnect the AC Adapter from the
camcorder.
To Detach The Battery Pack:
Slide the battery pack down slightly while sliding down
BATT. RELEASE p to detach it.
USING THE BATTERY PACK
Perform step 1 of CHARGING THE BATTERY PACK.
Battery pack
BN-V408U
BN-V416U
(optional)
BN-V428U
(optional)
BN-V840U
(optional)
BN-V856U
(optional)
LCD monitor on
1 hr. 10 min.
2 hrs. 30 min.
4 hrs. 20 min.
5 hrs. 20 min.
8 hrs. 10 min.
Viewfinder on
1 hr. 40 min.
3 hrs. 30 min.
6 hrs. 20 min.
7 hrs. 30 min.
11 hrs. 10 min.
Charging times are for a fully discharged battery pack.
USING AC POWER
Connect the AC Adapter to the camcorder as shown in
the following illustration.
The provided AC Adapter features automatic voltage
selection in the AC range from 110 V to 240 V.
GETTING STARTED
Battery pack
To DC
connector
To AC outlet
AC Adapter
ATTENTION
Before detaching the power source, make sure that the
camcorders power is turned off. Failure to do so can
result in a camcorder malfunction.
INFORMATION
The extended-use battery pack kit is a set composed of
a battery pack and AC Power Adapter/Charger:
VU-V840 KIT : BN-V840U battery pack & AA-V15EK
AC Power Adapter/Charger
VU-V856 KIT : BN-V856U battery pack & AA-V80EK
AC Power Adapter/Charger
Read the kit's instruction manual before using.
Also, by using the optional JVC VC-VBN856U DC
Cord, it will be possible to connect BN-V840U or
BN-V856U battery packs to the camcorder and supply
power directly to the camcorder.
NOTES:
If the protective cap is attached to the battery pack,
remove it first.
During charging, the camcorder cannot be operated.
Charging is not possible if the wrong type of battery is
used.
When charging the battery pack for the first time or after
a long storage period, the POWER/CHARGE lamp
r
may not light. Remove the battery pack from the
camcorder, then try charging again.
If a fully-charged batterys operation time remains
extremely short, the battery is worn out. Please purchase
a new one.
Recording time is reduced significantly when Zoom or
Record-Standby mode is engaged repeatedly or the LCD
monitor is used repeatedly.
Before extended use, it is recommended that you prepare
enough battery packs to cover 3 times the planned
shooting time.
Continued on next page.
Arrow
Approximate recording time
01 D50/40/30/20EK 01-10 02.12.4, 19:087
EN
8
Grip Adjustment
1 Separate the Velcro strip.
2 Pass your right hand through the loop and grasp the
grip.
3 Adjust your thumb and fingers through the grip, to
easily operate the Recording Start/Stop button w and
Power Switch y and Power Zoom Lever ^. Be sure to
fasten the Velcro strip to your preference.
Viewfinder Adjustment
1 Set the Power Switch y to or while
pressing down the Lock Button t located on the
switch.
2 Pull out the viewfinder fully and adjust it manually for
best viewability.
3 Turn the Dioptre Adjustment Control q until the
indications in the viewfinder are clearly focused.
w
y
^
Lithium-ion is vulnerable in colder temperatures.
About Batteries
DANGER! Do not attempt to take the batteries apart, or
expose them to flame or excessive heat, as it may
cause a fire or explosion.
WARNING! Do not allow the battery or its terminals to
come in contact with metals, as this can result in a
short circuit and possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large
power capacity. However, when one is exposed to cold
temperatures (below 10°C), its usage time becomes
shorter and it may cease to function. If this happens,
place the battery pack in your pocket or other warm,
protected place for a short time, then re-attach it to the
camcorder. As long as the battery pack itself is not
cold, it should not affect performance.
(If youre using a heating pad, make sure the battery
pack does not come in direct contact with it.)
Since the AC Adapter processes electricity internally,
it becomes warm during use. Be sure to use it only in
well-ventilated areas.
The following operation stops charging:
Set the Power Switch
y to PLAY, or .
Disconnect the AC Adapter from the camcorder.
Unplug the AC Adapter from the AC outlet.
Detach the battery from the camcorder.
This camcorder will be automatically turned off if its power
is supplied from the AC adapter and about 5 minutes pass
since it has entered into the recording standby mode with
a cassette inserted. If, under those conditions, the battery
is attached to the camcorder, its charging will start.
Using the optional AA-V40EK AC Power Adapter/
Charger, you can charge the BN-V408U/V416U/V428U
battery pack without the camcorder. However, it cannot
be used as an AC adapter.
To avoid interference with reception, do not use the AC
Adapter near a radio.
Perform charging where the temperature is between 10°C
and 35°C. 20°C to 25°C is the ideal temperature range for
charging. If the environment is too cold, charging may be
incomplete.
Charging time varies according to the ambient
temperature and the status of the battery pack.
GETTING STARTED
PAUSE
yt
q
01 D50/40/30/20EK 01-10 02.12.4, 19:088
EN
9
Q
Shoulder Strap Attachment
1 Thread the strap through the eyelet e, then fold it
back and thread it through the buckle. Repeat the
procedure to attach the other end of the strap to the
other eyelet
e located under the Grip Strap. Confirm
the strap is not twisted.
Tripod Mounting
CAUTION
When attaching the camcorder to a tripod, extend its
legs to stabilise the camcorder. It is not advised to use
small sized tripods. This may cause damage to the unit
by falling over.
1 To attach the camcorder to a tripod, align the
direction stud and screw to the stud hole u and
mounting socket i on the camcorder. Then tighten the
screw clockwise. Some tripods are not equipped with
studs.
GETTING STARTED
Loading/Unloading A Cassette
The camcorder needs to be powered up to load or eject
a cassette.
1 Slide and hold OPEN/EJECT Q in the direction of
the arrow then pull the cassette holder cover open until
it locks. The cassette holder opens automatically.
Do not touch internal components.
2 Insert or remove a tape and press PUSH HERE to
close the cassette holder.
Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely before
closing the cassette holder cover.
When the batterys charge is low, you may not be able
to close the cassette holder cover. Do not apply force.
Replace the battery with a fully charged one before
continuing.
3 Close the cassette holder cover firmly until it locks
into place.
To Protect Valuable Recordings:
Slide the erase protection tab on the back of the
tape in the direction of SAVE. This prevents the
tape from being recorded over. To record on this
tape, slide the tab back to REC before loading it.
Cassette holder
Cassette
holder
cover
Make sure the
window side
is facing out.
Tape
Recording mode
SP LP
30 min. 30 min. 45 min.
60 min. 60 min. 90 min.
80 min. 80 min. 120 min.
Approximate recording time
Be sure to press only the section labeled PUSH
HERE to close the cassette holder; touching other
parts may cause your finger to get caught in the
cassette holder, resulting in injury or product damage.
NOTES:
The cassette holder cannot be opened unless a power
supply is attached.
Continued on next page.
e
u
i
01 D50/40/30/20EK 01-10 02.12.4, 19:089
EN
10
It takes a few seconds for the cassette holder to open. Do
not apply force.
There may be a delay after you open the cassette holder
cover until the cassette holder opens. Do not use force.
If you wait a few seconds and the cassette holder does
not open, close the cassette holder cover and try again. If
the cassette holder still does not open, turn the
camcorder off then on again.
If the tape does not load properly, open the cassette
holder cover fully and remove the cassette. A few minutes
later, insert it again.
When the camcorder is suddenly moved from a cold
place to a warm environment, wait a short time before
opening the cassette holder cover.
Once the cassette holder is closed, it recedes automati-
cally. Wait until it recedes completely before closing the
cassette holder cover.
Closing the cassette holder cover before the cassette
holder comes out may cause damage to the camcorder.
Even when the camcorder is switched off, a cassette can
be loaded or unloaded. After the cassette holder is closed
with the camcorder switched off, however, it may not
recede. It is recommended to turn the power on before
loading or unloading.
When resuming recording, once you open the cassette
holder cover a blank portion will be recorded on the tape
or a previously recorded scene will be erased (recorded
over) regardless of whether the cassette holder came out
or not. See page 13 for information about recording from
the middle of a tape.
GETTING STARTED
Date/Time Settings
The date/time is recorded onto the tape at all times, but
its display can be turned on or off during playback
( pg. 24).
1 Set the Power Switch y to while pressing
down the Lock Button t located on the switch, and
open the LCD monitor fully or pull out the viewfinder
fully. The POWER/CHARGE lamp r lights and the
camcorder is turned on.
2 Press the MENU/VOLUME wheel $ in to access
the Menu Screen.
3 Rotate the MENU/VOLUME wheel $ to select
(CAMERA DISPLAY) and press it.
4 Rotate the MENU/VOLUME wheel $ to select
CLOCK ADJ.. Press it and day is highlighted. Rotate
the MENU/VOLUME wheel $ to input the day. Press it.
Repeat to input the month, year, hour and minute.
Rotate the MENU/VOLUME wheel $ to select
RETURN, and press it twice. The Menu Screen
closes.
NOTE:
Even if you select CLOCK ADJ., if the parameter is not
highlighted the camcorders internal clock continues to
operate. Once you move the highlight bar to the first date/
time parameter (day), the clock stops. When you finish
setting the minute and press the MENU/VOLUME wheel
$
in, the date and time begin operation from the date and
time you just set.
Recording Mode Setting
Set the tape recording mode depending on your
preference.
1 Set the Power Switch y to while pressing
down the Lock Button t located on the switch, and
open the LCD monitor fully or pull out the viewfinder
fully. The POWER/CHARGE lamp r lights and the
camcorder is turned on.
2 Press the MENU/VOLUME wheel $ in. The Menu
Screen appears.
3 Rotate the MENU/VOLUME wheel $ to select
(CAMERA) and press it.
4 Rotate the MENU/VOLUME wheel $ to select REC
MODE and press it. The Sub Menu appears. Select
SP or LP by rotating the MENU/VOLUME wheel $
and press it. Rotate the MENU/VOLUME wheel $ to
select RETURN, and press it twice. The Menu
Screen closes.
Audio Dubbing and Insert Editing ( pg. 29) are
possible on tapes recorded in the SP mode.
•“LP (Long Play) is more economical, providing
1.5 times the recording time.
NOTES:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
It is recommended that tapes recorded in the LP mode on
this camcorder be played back on this camcorder.
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
y
r
$
t
RETURN
AREMACD
ISPLAY
RE NEON SC
LCD / TV
UAOT
IMETDATE /
TIME CODE
CLOCK
ADJ .
FFO
2.025 .1
1
3
30:7
BR I GHT
AREMACD
ISPLAY
CLOCK
ADJ .
2.025 .1
1
3
30:7
01 D50/40/30/20EK 01-10 02.12.4, 19:0810
EN
11
OFF
(
CHARGE
)
PLAY
w
$
t y
r
180°
90°
o
20
5
m
h
1h30m
1h29m
0h03m
1h30m
0h02m (Blinking)
0h01m (Blinking)
0h00m (Blinking)
( )
Now
calculating
During shooting
Basic Recording
Perform the procedures listed below before continuing.
Power ( pg. 7)
Grip Adjustment ( pg. 8)
Viewfinder Adjustment (
pg. 8)
Load A Cassette (
pg. 9)
Recording Mode Setting ( pg. 10)
1 Remove the lens cap.
Pull on bottom end o of LCD monitor to open.
2 Set the Power Switch y to “ or ” while
pressing down the Lock Button
t located on the
switch.
Shooting while using the LCD monitor: Open the
LCD monitor fully.
Shooting while using the viewfinder: Pull out the
viewfinder fully.
The POWER/CHARGE lamp r lights and the
camcorder enters the Record-Standby mode. “PAUSE”
^ is displayed.
The image will not appear simultaneously on the LCD
monitor and the viewfinder. See “PRIORITY” in the
SYSTEM Menu ( pg. 23).
3 Press the Recording Start/Stop Button w. “
%, ^ appears and the tally lamp 3 lights while
recording is in progress.
To Stop Recording, press the Recording Start/Stop
Button w. The camcorder re-enters the Record-
Standby mode.
To Adjust The Brightness Of The Display
1. Make sure the Power Switch y is set to ” and
open the LCD monitor fully, then press the MENU/
VOLUME wheel $ in. The Menu Screen appears.
2. Rotate the MENU/VOLUME wheel $ to select
(CAMERA DISPLAY)” and press it.
3. Rotate the MENU/VOLUME wheel $ to select
“BRIGHT” and press it. The Menu Screen closes and
the bright level indicator 7 appears on the display.
To cancel, press the MENU/VOLUME wheel $
again so that the bright level indicator 7 disap-
pears.
4. Rotate the MENU/VOLUME wheel $ until the bright
level indicator 7 moves and the appropriate
brightness is reached, then press it. The bright level
indicator 7 disappears.
It is also possible to adjust the brightness of the
viewfinder by closing the LCD monitor, pulling out
the viewfinder and adjusting as described above.
TAPE RECORDING
NOTES:
If the Record-Standby mode continues for 5 minutes, the
camcorder’s power shuts off automatically. To turn the
camcorder on again, push back and pull out the
viewfinder again or close and re-open the LCD monitor.
When a blank portion is left between recorded scenes on
the tape, the time code is interrupted and errors may
occur when editing the tape. To avoid this, refer to
“RECORDING FROM THE MIDDLE OF A TAPE”
(
pg. 13).
To turn the tally lamp
3 or beep sounds off,
pg. 23.
When you use the LCD monitor outdoors in direct
sunlight, the LCD monitor may be difficult to see. If this
happens, use the viewfinder instead.
Black spots or bright spots of light (red, green or blue)
may appear constantly on the LCD monitor or the
viewfinder (
pg. 35).
When the Recording Start/Stop button
w is pressed, it
may take a few seconds before actual recording starts.
% starts rotating when the camcorder actually
starts recording.
The time required to calculate and display the remaining
tape length, and the accuracy of the calculation, may vary
according to the type of tape used.
“TAPE END” appears when the tape reaches its end, and
the power goes off automatically if left in this condition for
5 minutes. “TAPE END” also appears when a cassette at
its end is loaded.
Tape remaining time
indicator (Approximate)
Display
01 D50/40/30/20EK 11-15 02.12.4, 19:0911
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC GR-D40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC GR-D40 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van JVC GR-D40

JVC GR-D40 Gebruiksaanwijzing - Nederlands - 48 pagina's

JVC GR-D40 Gebruiksaanwijzing - Deutsch - 48 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info