40066
3
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
1
ENGLISH
INSTRUCTIONS
Model
GD-V4210PZW
GD-V4210PZW-G
GD-V4210PCE
GD-V4210PCE-G
GD-V4211PCE
Thank you for purchasing this JVC Monitor.
Before using the monitor, read this manual carefully so
that you know how to use the Monitor correctly.
Refer to this manual whenever questions or problems
about operation arise. Be sure to read and observe the
safety precautions.
Keep this manual where the user can see it easily.
* Installation and removal require special expertise.
Consult your product dealer for details.
This instruction manual refers to the GD-V4210PZW, GD-V4210PZW-G, GD-V4210PCE, GD-V4210PCE-G, and GD-V4211PCE.
The explanations and illustrations used in this instruction manual are of the GD-V4210PZW unless otherwise stated.
The differences between each model are as follows:
GD-V4210PZW
Silver
Frame Colour
Inputs VIDEO A
VIDEO B
COMPONENT
GD-V4210PZW-G
Gray
GD-V4210PCE
Silver
GD-V4210PCE-G
Gray
Available
Available
Available
Not available*
1
Not available*
1
Not available*
1
GD-V4211PCE
Silver
*
1
These inputs will be available with the separately-purchased video interface kit (IF-C421P1W).
Ask your dealer to install the video interface kit.
Contents
Page
Safety Precautions ....................................................2
Parts Identification .....................................................4
Remote Control ...................................................4
Monitor: Front View .............................................5
Monitor: Rear Views ............................................6
Preparations ..............................................................9
Checking the Accessories ...................................9
Installing the Batteries .........................................9
Installation ...............................................................10
Precautions .......................................................10
Connections ............................................................11
Precautions .......................................................11
Available Signals ...............................................11
Connection Examples .......................................12
Basic Operations .....................................................14
Daily Operations................................................14
Changing the Aspect Ratio............................... 15
Video Adjustments ..................................................16
Adjusting the Picture Quality ............................ 16
Adjusting the Screen Size and Position............ 17
Adjusting the Color Temperature ...................... 19
Adjusting the White Balance............................. 19
Changing the Picture Mode .............................. 21
Changing the Aspect Ratio............................... 21
Setting the Receivable Signal Types ................ 22
Setting the RGB Input .......................................23
Resetting the Function Selection Menu Settings ..
23
Page
Other Convenient Functions ....................................24
Showing On-screen Display ............................. 24
Confirming the Use Time...................................25
Setting the Auto Sleep Function ....................... 25
Prohibiting the Monitor’s Button Operations ..... 26
Showing the On-screen When Changing
the Input Mode ..................................................26
Mounting the Monitor Vertically ........................ 27
Setting the High-Definition signal Types ........... 27
Using the Pixel Shift Function........................... 27
Using the Power Save Function ....................... 28
Preventing the Afterimage Effect ...................... 29
Refreshing the Screen.......................................29
Resetting All the Setup Menu Settings ............. 29
Resetting All the Menu Settings ....................... 30
Serial Connections and Operations........................ 31
Connecting the Remote Control Cables ........... 31
Assigning ID Numbers.......................................31
Operating the Monitors Simultaneously............ 32
Operating the Monitors Individually .................. 32
Menu Classifications ...............................................33
Main Menu ........................................................33
Setup Menu .......................................................35
Troubleshooting .......................................................36
Self-diagnostic Indication ..................................37
Specifications ..........................................................38
01-03.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM1
2
Safety Precautions
FCC NOTICE
GD-V4210PZW / GD-V4210PZW-G / GD-V4210PCE / GD-V4210PCE-G
CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
GD-V4211PCE
CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
EUROPE EMC STANDARD NOTICE
GD-V4210PZW / GD-V4210PZW-G / GD-V4210PCE / GD-V4210PCE-G
Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measure.
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for
its installation, use and service. Please read these “Important Safeguards” carefully before use.
All the safety and operating instructions should be read before the product is operated.
The safety and operating instructions should be retained for future reference.
All warnings on the product and in the operating instructions should be adhered to.
All operating instructions should be followed.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
Do not use attachments not recommended by the product manufacturer as they may be hazardous.
Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature,
as this causes condensation, which may result in fire, electric shock, or other hazards.
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instructions,
and should use a mount recommended by the manufacturer.
01-03.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM2
3
ENGLISH
When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and
uneven surfaces which may cause the product and cart to overturn, damaging equipment or causing
possible injury to the operator.
Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the
product and protect it from overheating. These openings must not be blocked or covered. (The openings
should never be blocked by placing the product on bed, sofa, rug, or similar surface. It should not be
placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s
instructions have been adhered to.)
For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep distance
more than 10 cm (3
15
/16 inches).
This product should be operated only with the type of power source indicated on the label. If you are not sure of the
type of power supply to your home, consult your product dealer or local power company.
This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to
insert the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of
the grounded plug.
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the
product.
For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to
lightning and power line surges.
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a
risk of fire or electric shock.
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short
out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages
and other hazards. Refer all service to qualified service personnel.
Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions:
a)When the power supply cord or plug is damaged.
b)If liquid has been spilled, or objects have fallen on the product.
c) If the product has been exposed to rain or water.
d)If the product operated normally by following the operating instructions. Adjust only those controls that are covered
by the Operation Manual, as an improper adjustment of controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal operation.
e)If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance – this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
The product should be placed more than 30 cm (11
15
/16 inches) away from heat sources such as radiators, heat
registers, stoves, and other products (including amplifiers) that produce heat.
When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product
for protection against electric shock.
Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that
present special hazards when over heated.
Use only the accessory cord designed for this product to prevent shock.
01-03.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM3
4
Parts Identification
Remote Control
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
17
8
9
p
q
2
4
3
5
6
6 MENU/EXIT button
Use this button to display or erase menus.
While a sub-menu is displayed, pressing this button will
move you one screen back to the preceding menu.
7 Remote control cable jack (page 31)
Connect the remote control cable when using this remote
control as a wired remote control.
8 ASPECT button (page 15)
Use this button to switch between aspect ratios. Each time
you press the button, the aspect ratio changes as follows:
9 POWER button (page 14)
Use this button to turn on/off the power.
p VOLUME + / – buttons (page 14)
Use these buttons to adjust the volume level.
q 2 / 3 / 5 / buttons
Use these buttons to select menu items or make
adjustments.
REGULAR FULL
ZOOMPANORAMIC
1 Remote signal transmission window
2 DISPLAY button (page 14)
Use this button to display the input terminal, color system
(for VIDEO A or B input), scan system (for COMPONENT
input) and horizontal/vertical frequency (for RGB input).
Pressing the button again will make the display disappear.
3 VIDEO A, VIDEO B, COMPO. and RGB buttons
(page 14)
Use these buttons to switch between inputs.
To select the correct RGB input, you have to set “RGB
INPUT” correctly on the menu (see page 23).
Only for GD-V4210PCE, GD-V4210PCE-G and
GD-V4211PCE: Only RGB input can be reproduced.
To reproduce images through the other inputs, you need
to install video interface kit (IF-C421P1W), which is
separately purchased.
4 MUTING button (page 14)
Use this button to turn off the volume immediately.
Pressing the button again will resume the previous
volume level.
5 MULTIPLE MONITOR ADJUSTMENT buttons (page 31)
Use these buttons to set IDs, etc. when serial connection is
made.
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM4
5
ENGLISH
Monitor: Front View
1 Remote sensor/power lamp
Point the front end of the wireless remote control toward
here.
When the Monitor is turned on, the power lamp glows
green. It glows orange in standby mode.
2 Self-diagnostic lamps (page 37)
These lamps light/flash if something abnormal occurs
with the Monitor.
3 2 / 3 / 5 / buttons
Use these buttons to select menu items and to make
adjustments.
When no menu is displayed, you can use the 2 / 3
buttons to adjust the volume level.
4 MENU button
Use this button to display or erase menus.
While a sub-menu is displayed, pressing this button will
move you one screen back to the preceding menu.
5 INPUT button (page 14)
Use this button to switch between inputs.
To select the correct RGB input, you have to set “RGB
INPUT” correctly on the menu (see page 23).
Only for GD-V4210PCE, GD-V4210PCE-G and
GD-V4211PCE: Only RGB input can be reproduced.
To reproduce images through the other inputs, you need
to install video interface kit (IF-C421P1W), which is
separately purchased.
6 POWER button (page 14)
Use this button to turn on and off the Monitor.
MENU INPUT POWER
MENU INPUT POWER
3456
12
Bottom View
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM5
6
Parts Identification (Continued)
Monitor: Rear Views
1 AUDIO output terminal (pin jack) (page 12)
Connect these terminals to the audio input terminals of
external equipment such as an amplifier.
2 REMOTE 1 (RS232C) terminal (D-sub, 9-pin) (page 12)
Connect this terminal to the RS-232C terminal of a
personal computer.
For the control method using this terminal, consult an
authorized JVC dealer.
3 AC INPUT terminal (page 12)
Connect the supplied power cord to this terminal.
4 MAIN POWER switch (page 14)
Setting this switch to ON will put the Monitor into
standby mode, allowing you to turn on and off the power
using the POWER button either on the remote control or
on the Monitor.
5 SPEAKER OUT terminals (page 12)
Connect external speakers.
6 INTERNAL/EXTERNAL (built-in speaker/external
speaker) selecting switch (page 12)
INTERNAL: To use built-in speakers.
EXTERNAL: To use external speakers.
7 REMOTE 2 (JVC CODE) terminals (mini jack) (page 31)
IN
For Master Monitor: Connect a wired remote control to
this terminal for serial connection.
For Slave Monitors: Connect to the REMOTE 2 OUT
terminal of another Monitor in serial connection.
OUT
Connect to the REMOTE 2 IN terminal of another
Monitor for serial connection.
IN
RL
OUT
(RS232C)
(JVC CODE)
(120/230V)
SPEAKER OUT
RL
EXTERNALINTERNAL
4
3
2
1
5
6
7
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM6
7
ENGLISH
8 RGB B input/output terminals (page 12)
R, G, B, HD/Cs, VD input terminals (BNC)
Connect these terminals to the following output
terminals of a personal computer or other equipment:
Analog RGB signal output terminals
Horizontal sync (HD) signal or composite (Cs) signal
output terminal
Vertical sync (VD) signal output terminal
Notes:
External sync signals are automatically detected when
they come in.
When both horizontal (HD)/vertical (VD) sync and
composite (Cs) sync are connected, HD/VD sync signals
will be used.
R, G, B, HD/Cs, VD output terminals (BNC)
Connect these terminals to the following input terminals
of another monitor:
Analog RGB signal input terminals
Horizontal sync (HD) signal or composite (Cs) signal
input terminal
Vertical sync (VD) signal input terminal
8
9
p
9 RGB A input terminal (D-sub, 15-pin) (page 12)
Connect this terminal to the video output terminal of a
personal computer.
p AUDIO input terminals (pin jack)
Connect these terminals to the audio output terminals of a
personal computer or other equipment which is also
connected to the RGB A or RGB B input terminals.
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM7
8
Parts Identification (Continued)
q VIDEO A terminals (page 13)*
Video input terminal (BNC)
Connect this terminal to the video output terminal of a
VCR, etc.
Video output terminal (BNC)
Connect this terminal to the video input terminal of
another Monitor.
Audio input terminals (pin jack)
Connect these terminals to the audio input terminals of a
VCR, etc.
Note:
Since the video output terminal on this Monitor is loop-
though terminals, the devices connected to this video
output terminal should be correctly terminated.
Otherwise, pictures become abnormally bright.
w VIDEO B terminals (page 13)*
Y/C (S video) input terminal (Y/C terminal)
Connect this terminal to the S-video output terminal of a
VCR, etc.
Video input terminal (pin jack)
Connect this terminal to the video output terminal of a
VCR, etc.
Audio input terminals (pin jack)
Connect these terminals to the audio output terminals of
a VCR, etc.
Note:
* GD-V4210PCE, GD-V4210PCE-G, and GD-V4211PCE do
not have the following input terminals – VIDEO A,
VIDEO B, and COMPONENT. To input video, S-video,
and component signals, you need to install video
interface kit (IF-C421P1W), which is separately
purchased.
qw e
Note:
When both the video and S-video terminals are
connected, the S-video terminal will have priority.
e COMPONENT input terminals (page 13)*
Y, P
B/B-Y, PR/R-Y input terminals (BNC)
Connect these terminals to the component signal output
terminals of NTSC or high-vision equipment.
Audio input terminals (pin jack)
Connect these terminals to the audio output terminals of
the other equipment.
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM8
9
ENGLISH
Preparations
Checking the Accessories
The following accessories are included with the Monitor. Check for them. If any item is missing, please contact the dealer where
you purchased the Monitor.
Remote control (RM-C575) x 1
Remote control cable x 1
Power cord x 3 (Use the one matching the wall outlet.)
Batteries (AA/R6P) x 2
Installing the Batteries
Put the batteries in the remote control as follows. If the remote control has become erratic in operation, change the batteries.
1
Remove the back cover.
While pushing the release lever on the cover, remove the cover in
the direction of the arrow.
2
Place the batteries.
Put the two supplied batteries (AA/R6P), noting the ª and ·
markings, as shown.
3
Replace the back cover as illustrated.
Make sure the release lever on the cover is locked in place correctly.
Precautions for using batteries
If batteries are used improperly, the liquid could leak out, causing a fire, injury, etc. or dirtying the vicinity.
Take notice of the following:
Do not mix old and new batteries.
Do not mix different types of battery as different types may have different characteristics.
Place the batteries according to the ª and · markings indicated on the battery compartment.
When installing the batteries, insert the · end first to avoid a short circuit.
Use only the specified batteries.
When you are not using the remote control for a long time, remove the batteries.
When the batteries have reached the end of their life, replace them with new ones immediately. Otherwise, the liquid may leak
out, or malfunction may be caused by the leaked liquid. If the leaked liquid contacts your skin, wipe off the liquid with a soft
cloth. If the affected skin is left as is, you may get a rough skin.
Do not throw the batteries into fire or try recharging them.
The service life of batteries is six months to one year for normal use. The supplied batteries are only for checking the operation
and their life may be shorter. When the remote control operation becomes erratic, replace with new batteries.
The instruction below applies only to
the use in Holland.
Gebruike batterijen:
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM9
10
Installation
Precautions
When mounting the Monitor vertically, it is necessary to adjust the cooling fan speed to provide better heat
dissipation. Do not forget to perform this adjustment. (See page 27.)
When installing the Monitor, be sure to use a dedicated Stand Unit, Wall Mounting Unit, or Monitor Hanger Unit, depending
on a particular case. Ask your dealer for installation.
When installing the Monitor, refer also to the user manual for each option to use. Do not tilt the Monitor rightward, leftward,
or backward.
Route the power cord and connection cables along wall or floor corners to avoid walking on them.
For good heat dissipation, try to leave the following distances of space (minimum) around the Monitor.
The ambient temperature of the installation place should be within the range of 0˚C to 40˚C.
When installing the Monitor in a place, such as near the ceiling, the remote control may not work correctly because of possible
effects from the surroundings. If this happens, use the remote control as a wired remote control or move the Monitor where it
is free from these effects.
When installing the Monitor on a stand
When mounting the Monitor on the wall
Notes:
Do not allow the same image (pattern) to be continuously displayed on the screen for a long time; otherwise, the area on the
screen corresponding to the image may vary in brightness, leaving an afterimage on the screen. To reduce the afterimage, you
can use the Refresh function (see page 29).
The Monitor is manufactured using very high-precision technology, allowing for more than 99.99% active pixels, however, be
aware that only a slight number of pixels may be deficient or lit at all times.
Do not install the Monitor in such a way that the Monitor and other AV equipment affect each other adversely. (For example,
if a disturbed image or noise due to electromagnetic interference occurs, or if the infrared remote control malfunctions, change
the installation place.)
Front View
200 (7 )
/
8
7
150
(4 )
/
16
15
50
(2)
50
(2)
MENU INPUT POWER
150
(4 )
/
16
15
Wall
Side View
Unit: mm (inch)
Take measures against the Monitor from overturning:
To protect against abnormal events such as earthquakes and to prevent unexpected accidents, take appropriate measures
for preventing the Monitor from overturning; should it overturn, this could lead to personal injury.
For detailed information, refer to the manual supplied for the stand.
Front View
50
(2)
200 (7 )
/
8
7
MENU INPUT POWER
100 (3 )
100
(3 )
/
16
15
100
(3 )
/
16
15
/
16
15
Side View
Unit: mm (inch)
50
(2)
200
(7 )
/
8
7
Unit: mm (inch)
When hanging the Monitor from the ceiling
Side View
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM10
11
ENGLISH
Precautions
Before making connections, turn off all the equipment.
Plugs should be firmly inserted; poor connection could cause noise.
To unplug a cord, be sure to grasp its plug and pull it out.
Connect the power cord after having finished all other connections.
Refer also to the user manual of each piece of equipment.
Available Signals
Video signals
The following signals can be input to this Monitor:
VIDEO A and VIDEO B terminals accept — PAL, NTSC, NTSC4.43, and SECAM signals.
COMPONENT terminals accept — 480i, 576i, 480p, 720p, and 1080i (1035i) signals.
(For GD-V4210PCE, GD-V4210PCE-G, and GD-V4211PCE, to input the above signals, you need to install the video interface kit
(IF-C421P1W), which is separately purchased.)
Computer signals (Preset and user-defined video modes)
This Monitor has 13 preset video modes for the most popular industrial standard (marked with in the table below), and the
signals of the following image resolutions can be input to the RGB input terminals.
For less common video modes, this Monitor can also display a picture, and memorize the video modes as user-defined video
modes (up to five modes).
When a signal other than any of the preset modes is input, it will automatically be stored as a user-defined video mode, and
when a sixth user-defined video signal is input, the first mode will be erased from memory.
1 PC98 640 400 24.8 56.4 Non-interlace
2 VGA400-70 640 400 31.5 70.1 Non-interlace
3 VGA480-60 640 480 31.5 59.9 Non-interlace
4 VGA480-72 640 480 37.9 72.8 Non-interlace
5 VGA480-75 640 480 37.5 75.0 Non-interlace
6 MAC13” 640 480 35.0 66.7 Non-interlace
7 SVGA-56 800 600 35.2 56.3 Non-interlace
8 SVGA-60 800 600 37.9 60.3 Non-interlace
9 SVGA-72 800 600 48.1 72.2 Non-interlace
10 XGA-60 1024 768 48.4 60.0 Non-interlace
11 XGA-70 1024 768 56.5 70.1 Non-interlace
12 RGB15K-60 15.7 59.9 Interlace
13 RGB15K-50 15.6 50.0 Interlace
User-defined 15.0 – 16.0 50.0 – 75.0 Interlace
User-defined 16.0 – 56.0 50.0 – 75.0 Non-interlace
Notes:
When you are viewing XGA, setting the refresh rate (vertical scan frequency) of your personal computer to 60 Hz will enhance
the video image.
When a signal other than listed above is input, a part of the screen may become void or an unnecessary picture may appear.
Signals, though they are within the acceptable range of frequencies, may not be displayed normally, depending on the signal
type.
Depending on the connected equipment, the Monitor may not be compatible with composite sync (Cs) or G on sync signals.
When a preset mode signal is input, the vertical frequency displayed on the screen will have an “*” shown at its right top
position.
When No. 7 to No. 11 signals are input, thin lines may happen to be hard to view on the screen, due to the internal digital
processing.
Connections
Screen resolution
Horizontal
Vertical
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Preset
setting
Signal name Scan systemNo.
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM11
12
Connection Examples
Connections (Continued)
RGB connections
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
IN
RL
OUT
(RS232C)
(JVC CODE)
(120/230V)
SPEAKER OUT
RL
EXTERNALINTERNAL
Remote control
Remote control
cable
(supplied)
When using
external
speakers, set this
to EXTERNAL.
To speaker input
terminals
Amplifier, etc.
To audio input
Power cord (supplied)
To a wall outlet
External speakers
Personal computer
(used to control the Monitor)
System connections
To audio output
When connecting the RGB
terminals, set the RGB
INPUT setting correctly (see
page 23.)
For audio signal
connections, change the
connection when you
change the RGB INPUT
setting.
When connecting another Monitor, you
can use these RGB B OUT terminals
To R input
To G input
To B input
To HD/Cs input
To VD input
To monitor output
To audio output
To RS-232C
Personal computer 2
(used as the playback source)
Personal computer 1
(used as the playback source)
To VD output
To HD/Cs output
To B output
To G output
To R output
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM12
13
ENGLISH
AV connections
These terminals are not available for GD-V4210PCE, GD-V4210PCE-G, and GD-V4211PCE.
To use them, you need to install video interface kit (IF-C421P1W), which is separately purchased.
DVD player, etc
(used as the playback source)
To S-video output
To video output
To audio output
To audio output
To audio output
To video output
VCR 2
(used as the playback source)
To video output
Notes:
You can connect another VCR or Monitor to the VIDEO A OUT terminal. However, when connecting a VCR
to the VIDEO A terminals, do not connect both IN and OUT terminals to the same VCR.
When connecting a VCR to the VIDEO B terminals, you can use either the video or S-video terminals. If the
both terminals are used, S-video terminal will have priority.
VCR 1
(used as the playback source)
04-13.GD-V4210PZW[EN]/f 00.9.29, 5:54 PM13
14
Basic Operations
Daily Operations
1
Turn on the main power.
Set MAIN POWER on the back of the Monitor to ON.
The POWER lamp on the upper left of the front panel
glows orange.
2
Turn on the power.
Press POWER on the remote control to turn the power on.
The POWER lamp changes to glow green.
You can also use the POWER on the front panel (lower
right) to turn on the Monitor.
3
Select an input.
Select the desired input by pressing VIDEO A, VIDEO B,
COMPO. or RGB.
You can also select the input by pressing INPUT on the
Monitor. Each time you press the button, the input
mode changes in sequence.
Only for GD-V4210PCE, GD-V4210PCE-G, and
GD-V4211PCE: You can only select RGB.*
Note:
This Monitor has two RGB input terminals — RGB A and
RGB B.
When you select the RGB input, the one set on the menu
(RGB INPUT: see page 23) is selected as the input source.
If you want to select the other RGB input than the current
one, change the RGB INPUT setting on the menu.
4
Adjust the volume.
Notes:
While no menu is displayed, you can adjust the volume by
pressing 2 / 3 on the Monitor.
When the INTERNAL/EXTERNAL selecting switch on the
back of the Monitor is set to EXTERNAL, no sounds come
out of the built-in speakers.
When you want to hear audio sound from the built-in
speakers, set the INTERNAL/EXTERNAL selecting switch
to INTERNAL.
To turn off the volume immediately
Press MUTING.
“MUTING ON” is displayed, and the sound goes out.
Pressing the button again resumes the previous volume level.
To make the screen indication appear
Press DISPLAY.
The types of input and signal are indicated on the screen for
about 3 seconds.
You can also make the screen indication appear using menus
(page 24).
Rear View
4
3
2
MUTING
DISPLAY
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
I
1
VIDEO A VIDEO B
RGB A or RGB B COMPO.
VIDEO A
NTSC
Input selected
Input video signal
Ex. When selecting “VIDEO A” input
: 25
VOLUME
+
* Only for GD-V4210PCE, GD-V4210PCE-G, and GD-V4211PCE: You need to install the video interface kit (IF-C421P1W), which
is separately purchased, to reproduce input images for VIDEO A, VIDEO B, and COMPONENT.
14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM14
15
ENGLISH
Changing the Aspect Ratio
Precautions for using the screen mode switching function
This Monitor features a screen mode switching (aspect ratio
change) function. If you select a mode different in aspect
ratio from software such as TV programs, the picture may
look different from original picture. Be aware of this point
when you are selecting a screen mode.
If you select a wide screen mode while viewing
conventional video programs of the aspect ratio 4:3, some
portions (edges) of the original picture will be cut off, or
deformed. To enjoy the original picture as it is, select
“REGULAR” while viewing such programs.
If you place the Monitor in a tea room, hotel, etc. for
business purposes or public viewing and modify the picture
by using the screen mode switching (aspect ratio change)
function, this could violate the copyright protected by the
copyright law, which requires your special attention.
If you make the screen very bright and watch programs
selecting “REGULAR” for a long period of time, the
Monitor screen may happen to be burned in. If this occurs,
watching programs using a wide screen mode for a while
will reduce the burn-in gradually.
With this Monitor, you can select among three types of wide
screens (FULL, ZOOM, and PANORAMIC) in addition to the
REGULAR screen of conventional 4:3 aspect ratio.
Press ASPECT to select the screen size
Each time you press the button, the screen size changes as
follows:
REGULAR: Displays at conventional 4:3 aspect ratio.
FULL: REGULAR size display is enlarged
horizontally.
ZOOM: REGULAR size display is enlarged
vertically and horizontally at the same ratio.
PANORAMIC: REGULAR size display is enlarged
horizontally to the extent that the picture
does not look abnormally.
Notes:
When one of the following signals is being input, you
cannot select the aspect ratio you want.
1080i, 1035i or 720p signal through the COMPONENT input
terminals
You can only select FULL.
480p signal through the COMPONENT input terminals
You cannot select PANORAMIC.
When any signal other than RGB15K-60 and RGB15K-50
through the RGB input terminals
You can select only REGULAR and FULL.
The aspect ratio can also be changed on the Function
Selection Menu (page 21).
ASPECT
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
REGULAR FULL
ZOOMPANORAMIC
14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM15
16
Video Adjustments
For video adjustments, use menus.
You can use the buttons either on the remote control or on
Monitor for menu operations.
• Refer also to “Menu Classifications” on pages 33 and 35.
Adjusting the Picture Quality
Picture quality can be set for each input mode.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/ to move the cursor (3) to
“PICTURE ADJ.”
3
Press 3 to display the Picture
Adjustment Menu.
4
Press 5/ to move the cursor (3) to the
item you want to adjust.
Item Adjustment Standard
range (Reset)
CONTRAST –20 to +20 +10
BRIGHT (brightness) –20 to +20 0
CHROMA* –20 to +20 0
PHASE** –20 to +20 0
SHARPNESS –20 to +20 0
sub menu See “To make an adjustment
while viewing the adjustment
bar” on the next page.
reset See “To reset the adjustments” on
the next page.
* Adjustment is not possible when RGB input is selected.
** Adjustment is only possible when viewing NTSC signal
through the VIDEO A or B terminal.
5
Press 2/3 to make adjustments.
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
CONTRAST
BRIGHT
CHROMA
PHASE
SHARPNESS
sub menu
reset
ADJUST:
PICTURE ADJ.
SELECT:
EXIT:
MENU
VIDEO A
: +01
:
: –02
:
:
00
00
00
Cursor (3)
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
MENU/EXIT
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
MENU INPUT POWER
MENU INPUT POWER
MENU
2 / 3
5
5 /
14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM16
17
ENGLISH
To make an adjustment while viewing the adjustment
bar
After step 3 on page 16, proceed as follows:
1 Press 5/ to move the cursor (3) to “sub menu.”
2 Press 3 to display the Sub Menu.
The Sub Menu for CONTRAST appears on the screen.
3 Press 5/ to select the Sub Menu you want to adjust.
Each time you press the button, the Sub Menu changes as
follows:
4 Press 2/3 to adjust the selected item.
5 Repeat steps 3 and 4 to adjust the other items.
6 Press MENU/EXIT (or MENU on the Monitor) three times
to exit from the menu operations.
To reset the adjustments
After step 3 on page 16, proceed as follows:
1 Press 5/ to move the cursor (3) to “reset.”
2 Press 3.
The confirmation screen appears.
3 Press 3 again to reset the adjustments.
To cancel the reset, press MENU/EXIT (or MENU on the
Monitor).
CONTRAST BRIGHT
PHASESHARPNESS
CHROMA
Adjusting the Screen Size and Position
The screen size and position can be adjusted.
Adjusted settings can be stored for each signal type; therefore,
when the same signal comes in, the stored settings are
recalled.
When adjusting the size, the size cannot be adjusted
proportionally, but can be enlarged rightward (or
downward) only and reduced leftward (or upward) only.
Therefore, it is necessary to adjust both the size and position
alternately to adjust to the appropriate size.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/ to move the cursor (3) to
“SIZE/POSITION ADJ.”
3
Press 3 to display the Size/Position
Adjustment Menu.
4
Press 5/ to move the cursor (3) to the
item you want to adjust.
Item Adjustment range
H (horizontal) SIZE –80 to +80
H POSITION –80 to +80
V (vertical) SIZE –80 to +80
V POSITION –80 to +80
CLOCK PHASE* –20 to +20
sub menu See “To make an adjustment
while viewing the adjustment
bar” on the next page.
reset See “To reset the adjustments” on
the next page.
* CLOCK PHASE can be used, while RGB input is
selected, to reduce flickering and blurring on the
screen after adjusting the screen size.
Are you sure?
"YES" then press key.
"NO" then press key
MENU
reset
+
:+01
CONTRAST
H SIZE
H POSITION
V SIZE
V POSITION
CLOCK PHASE
sub menu
reset
ADJUST:
SIZE/POSITION ADJ.
SELECT:
EXIT:
MENU
: +01
:
: –02
:
:
00
00
00
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
Cursor (3)
(To be continued on the next page)
14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM17
18
Video Adjustments (Continued)
MENU/EXIT
VOLUME –
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
5
Press 2/3 to adjust the selected item.
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
To make an adjustment while viewing the adjustment
bar
After step 3 on page 17, proceed as follows:
1 Press 5/ to move the cursor (3) to “sub menu.”
2 Press 3 to display the Sub Menu.
The Sub Menu for H SIZE appears on the screen.
3 Press 5/ to select the Sub Menu you want to adjust.
Each time you press the button, the Sub Menu changes as
follows:
4 Press 2/3 to adjust the selected item.
5 Repeat steps 3 and 4 to adjust the other items.
6 Press MENU/EXIT (or MENU on the Monitor) three times
to exit from the menu operations.
To reset the adjustments
After step 3 on page 17, proceed as follows:
1 Press 5/ to move the cursor (3) to “reset.”
2 Press 3.
The confirmation screen appears.
3 Press 3 again to reset the adjustments.
To cancel the reset, press MENU/EXIT (or MENU on the
Monitor).
Note:
Adjustment values for both horizontal and vertical sizes of
the screen are so related that if one is adjusted up to near
the maximum value, the attainable value of the other will
be decreased.
:+01
H SIZE
+
++
+
H SIZE H POSITION
V POSITIONCLOCK PHASE
V SIZE
Are you sure?
"YES" then press key.
"NO" then press key
MENU
reset
MENU INPUT POWER
MENU INPUT POWER
MENU
2 / 3
5
5 /
14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM18
19
ENGLISH
Adjusting the Color Temperature
The adjusted setting applies to all inputs.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
4
Press 5/ to move the cursor (3) to
“COLOR TEMP.
5
Press 2/3 to make an adjustment.
Each time you press the button, the color temperature
alternates between “HIGH” and “LOW.”
HIGH: To make the screen become bluish.
LOW: To make the screen become reddish.
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
Note:
To make a fine adjustment, adjust “WHITE BALANCE” (see
the right column).
Adjusting the White Balance
G GAIN, B GAIN and R GAIN can be finely adjusted
separately for “HIGH” and “LOW” settings of the color
temperature.
When using plural numbers of the Monitors, this can be
useful to have the same color on each screen.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
“WHITE BALANCE.”
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 3 to display the White Balance
Adjustment Menu.
4
Press 5/ to move the cursor (3) to the
item you want to adjust.
5
Press 2/3 to adjust the selected item.
6
Repeat steps 4 and 5 to adjust the other
items.
7
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
Notes:
Adjustable range will vary among the Monitors.
“MAX” may appear soon after you begin adjustment. This
is normal but not a malfunction.
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
Cursor (3)
COLOR TEMP.
PICTURE MODE
ASPECT
SIGNAL MODE
RGB INPUT
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: STILL
: PANORAMA
: AUTO
: A
*
“ * ” appears
only when you
have adjusted
the White
Balance (see
the right
column).
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
R GAIN
G GAIN
B GAIN
sub menu
reset
ADJUST:
WHITE BALANCE:HIGH
SELECT:
EXIT:
MENU
: 000
: 001
: 002
+
14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM19
20
Video Adjustments (Continued)
MENU/EXIT
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
To make an adjustment while viewing the adjustment
bars
After step 3 on page 19, proceed as follows:
1 Press 5/ to move the cursor (3) to “sub menu.”
2 Press 3 to display the Sub Menu.
The Sub Menu for R GAIN appears on the screen.
3 Press 5/ to select the Sub Menu you want to adjust.
Each time you press the button, the Sub Menu changes as
follows:
4 Press 2/3 to adjust the selected item.
5 Repeat steps 3 and 4 to adjust the other items.
6 Press MENU/EXIT (or MENU on the Monitor) three times
to exit from the menu operations.
To reset the adjustments
After step 3 on page 19, proceed as follows:
1 Press 5/ to move the cursor (3) to “reset.”
2 Press 3.
The confirmation screen appears.
3 Press 3 again to reset the adjustments.
To cancel the reset, press MENU/EXIT (or MENU on the
Monitor).
: 000
R GAIN
+
R GAIN G GAIN
B GAIN
Are you sure?
"YES" then press key.
"NO" then press key
MENU
reset
MENU INPUT POWER
MENU INPUT POWER
MENU
2 / 3
5
5 /
14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM20
21
ENGLISH
Changing the Aspect Ratio
The setting adjusted applies to all inputs.
You can change the aspect ratio by pressing ASPECT. (See
page 15.)
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
* “PICTURE MODE” and “SIGNAL MODE” do not
appear at the same time.
“PICTURE MODE” appears when RGB input is
selected, and one of the following signals comes in —
RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56,
SVGA-60, and XGA-60. On the other hand, “SIGNAL
MODE” appears when VIDEO A, VIDEO B, or COMP.
(component) input is selected.
4
Press 5/ to move the cursor (3) to
“ASPECT.”
5
Press 2/3 to select an aspect ratio you
want.
Each time you press the button, the aspect ratio changes
as follows:
* For detailed information on these aspect ratios, see
page 15.
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
Note:
When one of the following signals is being input, you
cannot select the aspect ratio you want.
1080i, 1035i or 720p signal through the COMPONENT input
terminals
You can only select FULL.
480p signal through the COMPONENT input terminals
You cannot select PANORAMIC.
When any signal other than RGB15K-60 and RGB15K-50
through the RGB input terminals
You can select only REGULAR and FULL.
Changing the Picture Mode
When one of the following signals comes in through the RGB
terminals — RGB15K-50, RGB15K-60, PC98, VGA480-60,
SVGA-56, SVGA-60, and XGA-60, you can select the picture
mode suited to either still pictures or moving pictures.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
* “PICTURE MODE” and “SIGNAL MODE” do not
appear at the same time.
“PICTURE MODE” appears when RGB input is
selected, and one of the following signals comes in —
RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56,
SVGA-60, and XGA-60. On the other hand, “SIGNAL
MODE” appears when VIDEO A, VIDEO B, or COMP.
(component) input is selected.
4
Press 5/ to move the cursor (3) to
“PICTURE MODE.”
5
Press 2/3 to select the picture mode
you want.
Each time you press the button, the picture mode
alternates between “STILL” and “MOVING.”
Selects the picture quality suited to either the still picture
or the moving picture.
STILL: When showing the still pictures mainly on the
screen.
MOVING: When showing the moving pictures mainly on
the screen.
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
Cursor (3)
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
COLOR TEMP.
PICTURE MODE
ASPECT
SIGNAL MODE
RGB INPUT
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: STILL
: PANORAMA
: AUTO
: A
*
*
Cursor (3)
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
REGULAR FULL
ZOOMPANORAMIC
COLOR TEMP.
PICTURE MODE
ASPECT
SIGNAL MODE
RGB INPUT
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: STILL
: PANORAMA
: AUTO
: A
*
*
14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM21
22
Setting the Receivable Signal Types
You can set the receivable signal types. Normally, select
“AUTO.”
A common setting will apply to both VIDEO A and B
terminals, and a different setting will apply to the
COMPONENT terminals.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
* “PICTURE MODE” and “SIGNAL MODE” do not
appear at the same time.
“PICTURE MODE” appears when RGB input is
selected, and one of the following signals comes in —
RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56,
SVGA-60, and XGA-60. On the other hand, “SIGNAL
MODE” appears when VIDEO A, VIDEO B, or COMP.
(component) input is selected.
4
Press 5/ to move the cursor (3) to
“SIGNAL MODE.”
5
Press 2/3 to select the receivable video
signal type.
Each time you press the button, the receivable video
signal type changes as follows:
When VIDEO A or VIDEO B input is selected:
When COMPONENT input is selected:
* Changes according to the “HD SIGNAL MODE”
setting (see page 27).
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit the menu
operations.
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
Cursor (3)
MENU/EXIT
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
Video Adjustments (Continued)
COLOR TEMP.
PICTURE MODE
ASPECT
SIGNAL MODE
RGB INPUT
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: STILL
: PANORAMA
: AUTO
: A
*
*
AUTO NTSC
PALSECAM
NTSC4.43
AUTO 480i 576i
480p720p
1080i
(1035i)*
MENU INPUT POWER
MENU INPUT POWER
MENU
2 / 3
5
5 /
14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM22
23
ENGLISH
Setting the RGB Input
After connecting the playback device such as a PC to the RGB
terminals, you have to specify which terminal you have
connected the device to — RGB A (D-sub 15 pin) or RGB B
(BNC) input.
Without setting the RGB input correctly, you cannot show
any picture though you select the RGB input.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
* “PICTURE MODE” and “SIGNAL MODE” do not
appear at the same time.
“PICTURE MODE” appears when RGB input is
selected, and one of the following signals comes in —
RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56,
SVGA-60, and XGA-60. On the other hand, “SIGNAL
MODE” appears when VIDEO A, VIDEO B, or COMP.
(component) input is selected.
4
Press 5/ to move the cursor (3) to
“RGB INPUT.”
5
Press 2/3 to select the correct RGB
terminal you use.
Each time you press the button, the RGB input alternates
between “A” and “B.”
A: When connecting the playback device to the
RGB A terminal (D-sub 15).
B: When connecting the playback device to the
RGB B IN terminal (BNC).
6
Press MENU/EXIT (or MENU on the
Monitor) twice to exit the menu
operations.
Resetting the Function Selection Menu Settings
You can reset all the Function Selection Menu settings at a
time.
1
Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
2
Press 5/ to move the cursor (3) to
“FUNCTION SELECT.”
3
Press 3 to display the Function
Selection Menu.
* “PICTURE MODE” and “SIGNAL MODE” do not
appear at the same time.
“PICTURE MODE” appears when RGB input is
selected, and one of the following signals comes in —
RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56,
SVGA-60, and XGA-60. On the other hand, “SIGNAL
MODE” appears when VIDEO A, VIDEO B, or COMP.
(component) input is selected.
4
Press 5/ to move the cursor (3) to
“reset.”
5
Press 3.
The confirmation screen appears.
6
Press 3 again to reset the adjustments.
To cancel the reset, press MENU/EXIT (or MENU on
the Monitor).
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
Cursor (3)
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
Cursor (3)
COLOR TEMP.
PICTURE MODE
ASPECT
SIGNAL MODE
RGB INPUT
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: STILL
: PANORAMA
: AUTO
: A
*
*
COLOR TEMP.
PICTURE MODE
ASPECT
SIGNAL MODE
RGB INPUT
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: STILL
: PANORAMA
: AUTO
: A
*
*
Are you sure?
"YES" then press key.
"NO" then press key
MENU
reset
14-23.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM23
24
Other Convenient Functions
MENU/EXIT
VOLUME –
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
Cursor (3)
VIDEO A
NTSC
COMPONENT
480i
PC
37.9kHz 60.3Hz*
Input Video signal
type
Ex. When selecting “COMPONENT” input
Ex. When selecting “RGB” input
When the signal being input is a preset video
mode, an “*” will be shown after the
frequency.
Ex. When selecting “VIDEO A” input
MENU INPUT POWER
MENU INPUT POWER
MENU
2 / 3
5
5 /
To set the other convenient functions, use menus.
You can use the buttons either on the remote control or on
Monitor for menu operations.
• Refer also to “Menu Classifications” on pages 33 and 35.
Showing On-screen Display
The input mode and signal type will be indicated on the
screen.
The following procedure can be done by using the buttons
on the Monitor. You can also show these information by
pressing DISPLAY on the remote control. (See page 14.)
1
Press MENU (or MENU/EXIT on the
remote control) to display the Main
Menu.
2
Press 5/ to move the cursor (3) to
“STATUS DISPLAY.”
3
Press 3 to display the current input
terminal and received signal type.
Note:
If you want to make these information appear automatically
when you change the input mode, see “Showing the On-
screen When Changing the Input Mode” on page 26.
Input selected
24-30.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM24
25
ENGLISH
Setting the Auto Sleep Function
This function allows you to turn off (into standby mode)
automatically when no signal comes in for a certain period of
time.
The power lamp flashes (orange) while in the Sleep mode
(standby).
When signals come in while in the Sleep mode, the Monitor
turns on (the power lamp glows green).
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
“AUTO SLEEP.”
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select the desired amount
of time.
Select the number of minutes before the Monitor goes
into standby mode after the signal has ceased to be
supplied.
Each time you press the button, the amount of time
changes as follows:
To cancel the Auto Sleep function, select “OFF.”
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Confirming the Use Time
You can confirm the hours of use on the Setup Menu.
This may be necessary when you ask for any service.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Keep pressing 5/ until the second
page of the Setup Menu appears.
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Confirm the hour of use.
The displayed value for the hours of use is divided by
100. To calculate the actual hours of use, multiply the
displayed value by 100.
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Notes:
The value for the hours of use is added by one hour unit. If
you use the monitor within one hour, it will not be added to
the hours of use.
The period when the monitor is on standby (the power
lamp glows orange) will not be added to the hours of use.
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x1000
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: ON
: ON
: ON
: ON
: 001
Hours of use
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
Cursor (3)
OFF 1 MIN. 2 MIN. 3 MIN. 4 MIN. 5 MIN.
24-30.GD-V4210PZW[EN]/f 00.10.6, 2:50 PM25
26
Other Convenient Functions (Continued)
MENU/EXIT
VOLUME –
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
Prohibiting the Monitor’s Button Operations
This function allows you to prohibit the button operations on
the Monitor to prevent malfunction or avoid tampering.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
“CONTROL LOCK.”
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select the desired setting.
Each time you press the button, the Control Lock
function alternates between “ON” and “OFF.”
To cancel the Control Lock function, select “OFF.”
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Note:
Even when the Control Lock function is in use, the
following operations are possible:
Operation to cancel the Control Lock function
All operations from the remote control
Showing the On-screen When Changing the Input Mode
With this function, you can see the selected input mode and
signal type when changing the input mode.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
MENU INPUT POWER
MENU INPUT POWER
MENU
2 / 3
5
5 /
24-30.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM26
27
ENGLISH
2
Press 5/ to move the cursor (3) to
“STATUS DISPLAY.”
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select the desired setting.
Each time you press the button, the Status Display
function alternates between “ON” and “OFF.”
To cancel the Status Display function, select “OFF.”
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Mounting the Monitor Vertically
When mounting the Monitor vertically, the temperature inside
the Monitor rises more than it is mounted horizontally. To
provide better heat dissipation, it is necessary to perform the
adjustment to switch fan speeds.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
“VENTILATION MODE.”
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select “V.”
Each time you press the button, the Ventilation Mode
alternates between “H (horizontal mounting)” and “V
(vertical mounting).”
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
Setting the High-Definition Signal Types
You can select one of the High-Definition (HD) signal types
through the COMPONENT terminals — 1080i or 1035i.
Normally set it to “1080i.”
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
“HD SIGNAL MODE.”
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select the desired setting.
Each time you press the button, the HD signal type
alternates between “1080i” and “1035i.”
You can select either “1080i” and “1035i” according to
the HD signal you input — whichever gives you
proportionally shaped pictures.
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations
Using the Pixel Shift Function
This function periodically shift the position (pixels) of the
displayed picture on the screen so that you can avoid the
screen from being burned in.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
(To be continued on the next page)
24-30.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM27
28
Other Convenient Functions (Continued)
MENU/EXIT
VOLUME –
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
2
Press 5/ to move the cursor (3) to
“PIXEL SHIFT” (on the second page).
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select the desired setting.
Each time you press the button, the Pixel Shift function
alternates between “ON” and “OFF.”
To cancel the Pixel Shift function, select “OFF.”
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Using the Power Save Function
You can use this function to reduce the electrical consumption
and to extend the lifetime of the Monitor’s screen.
The brightness of the screen will be reduced.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
“POWER SAVE” (on the second page).
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select the desired setting.
Each time you press the button, the Power Save function
alternates between “ON” and “OFF.”
To cancel the Power Save function, select “OFF.”
4
Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
MENU INPUT POWER
MENU INPUT POWER
MENU
2 / 3
5
5 /
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x1000
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: ON
: ON
: ON
: ON
: 001
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x1000
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: ON
: ON
: ON
: ON
: 001
24-30.GD-V4210PZW[EN]/f 00.10.6, 2:51 PM28
29
ENGLISH
Preventing the Afterimage Effect
After showing the same still picture on the screen, reverse the
color on the screen using this function so that you can avoid
the screen from being burned in with the still picture.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
“COLOR-REVERSE” (on the second page).
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select “ON” while
showing the still picture so that you can
avoid the screen from being burned in
with the still picture.
Each time you press the button, the Color-Reverse
function alternates between “ON” and “OFF.”
To cancel the Color-Reverse function, select “OFF.”
4
Press MENU/EXIT (or MENU on the Monitor)
once to exit from the menu operations.
Refreshing the Screen
After the power is turned off, a whitish image may be left on
the screen. In that case, leave the monitor in a white back state
for a while, and the image will disappear.
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
“REFRESH” (on the second page).
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 2/3 to select the desired setting.
The Setup Menu disappears, and the white screen appears.
To cancel the Refresh function
Repeat steps
1
and
2
, then select “OFF” by pressing 2/3.
Resetting All the Setup Menu Settings
You can reset all the following Setup Menu settings at a time,
except the use time of the source lamp (HOUR METER).
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to
“reset” (on the second page).
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 3.
The confirmation screen appears.
4
Press 3 again to reset all the Setup
Menu settings.
To cancel the reset, press MENU/EXIT (or MENU on
the Monitor).
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x1000
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: ON
: ON
: ON
: ON
: 001
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x1000
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: ON
: ON
: ON
: ON
: 001
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x1000
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: ON
: ON
: ON
: ON
: 001
Are you sure?
"YES" then press key.
"NO" then press key
MENU
reset
24-30.GD-V4210PZW[EN]/f 00.9.29, 5:55 PM29
30
MENU/EXIT
VOLUME –
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
Other Convenient Functions (Continued)
Resetting All the Menu Settings
You can reset all the Menu settings and adjustments at a time,
except the use time of the source lamp (HOUR METER).
1
On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
2
Press 5/ to move the cursor (3) to “all
reset” (on the second page).
The Setup Menu consists of two pages. If you keep
pressing 5/, you can move to the other page from
the current page.
3
Press 3.
The confirmation screen appears.
4
Press 3 again to reset all the Menu
settings and adjustments.
To cancel the reset, press MENU/EXIT (or MENU on
the Monitor).
Cursor (3)
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
MENU INPUT POWER
MENU INPUT POWER
MENU
2 / 3
5
5 /
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x1000
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: ON
: ON
: ON
: ON
: 001
Are you sure?
"YES" then press key.
"NO" then press key
MENU
all reset
24-30.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM30
31
ENGLISH
Serial Connections and Operations
When the Monitors are serially connected, you can control all of them at the same time (simultaneous operation) or control them
one by one separately (individual operation).
For individual operation, you have to assign an ID number to each of the Monitors.
For the purpose of explanation, we will call Monitor 1 as a Master and Monitor 2 and subsequent Monitors as Slaves.
Connecting the Remote Control Cables
Remote control
Assigning ID Numbers
The following procedure should be performed slowly and
securely.
1
Turn on all the connected Monitors.
2
Press MODE.
On Master Monitor screen, “MASTER” is displayed, and
“[00]” is displayed on all of Slave Monitor screens.
3
Press ID SET.
On the Slave Monitor screens, “[01]”, “[02]”, “[03]”, ——
and so on will be displayed in the order of connection.
Notes:
When a maximum number of 20 Monitors are connected, it
will take approx. 10 seconds for ID numbers to be displayed
on all the screens.
If “[00]” is displayed on all the Monitor screens or if some
of the Monitors have no indication in step 1, press MODE to
turn off the indications on all Monitor screens, and then
press MODE again.
MASTER
[01] [02] [XX]
MASTER
[00] [00] [00]
Slave 2
Master
Slave 1
Slave XX
Slave 2
Master
Slave 1
Slave XX
Remote control cable
(supplied with
Monitor 2)
Remote control cable
(supplied with
Monitor 1)
Remote control cable
(supplied with
Monitor 3)
Notes:
Do not connect the last monitor to Monitor 1.
When operating with a wired remote control, connect it to the REMOTE 2 (JVC CODE) input terminal of Monitor 1.
When Monitors are serially connected, Monitor 2 and subsequent Monitors cannot be directly controlled with a wireless
remote control.
Even after the Monitors are serially connected, each of them can be operated using the buttons on the Monitor. However,
you cannot perform simultaneous or individual operation even with the buttons on Master Monitor.
IN
RL
OUT
(RS232C)
(JVC CODE)
(120/230V)
SPEAKER OUT
RL
EXTERNALINTERNAL
IN
RL
OUT
(RS232C)
(JVC CODE)
(120/230V)
SPEAKER OUT
RL
EXTERNALINTERNAL
IN
RL
OUT
(RS232C)
(JVC CODE)
(120/230V)
SPEAKER OUT
RL
EXTERNALINTERNAL
IN
RL
OUT
(RS232C)
(JVC CODE)
(120/230V)
SPEAKER OUT
RL
EXTERNALINTERNAL
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
Remote control
cable (supplied)
Monitor 1
(Master)
Monitor 2
(Slave)
Monitor 3
(Slave)
Monitor XX
(Slave)
When performing simultaneous or individual operation,
use the remote control.
MENU/EXIT
MODE
ID SET
ID +/–
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM31
32
When performing simultaneous or individual operation,
use the remote control.
MENU/EXIT
MODE
ID +/–
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB
COMPO.
VIDEO B
VOLUME
MULTIPLE
MODE ID SET
MONITOR ADJUSTMENT
VIDEO A
MUTING
MENU/EXIT
RM-C575 REMOTE CONTROL UNIT
ID
Operating the Monitors Simultaneously
Check that no ID number is shown on the screens. If any ID
numbers are shown, press MODE to erase them.
The following procedure should be performed slowly and
securely.
Example: When adjusting “CONTRAST”:
1
Press MENU/EXIT to display the Main
Menu.
The Main Menus appear on all the connected Monitors’
screens.
2
Press 5/ to move the cursor (3) to
“PICTURE ADJ.”
3
Press 3 to display the Picture
Adjustment Menu.
The Picture Adjustment Menus appear on all the
connected Monitors’ screens.
4
Press 5/ to move the cursor (3) to
“CONTRAST.”
5
Press 2/3 to make an adjustment.
At this time, if the Monitors have different
“CONTRAST” settings, the adjustment is made, based
on the different settings.
6
Press MENU/EXIT twice to exit from the
menu operations.
Operating the Monitors Individually
The following procedure should be performed slowly and
securely.
1
Press MODE to display the ID numbers
on all the connected Monitors’ screens.
2
Press ID +/– to select the Monitor you
want to operate.
Example: To select “[02]”:
Press ID + twice.
Slave 2’s ID number “[02]” is highlighted.
* The selected ID number will be also shown on the
Master Monitor (in this example, “MASTER\[02]”).
3
Perform any desired operations, such as
adjusting menu items.
Notes:
If “[00]” is displayed on all the Monitor screens or if some of
the Monitor screens have no indication in step 1, press
MODE to turn off the indications on all screens, and then
press MODE again.
• If the ID number of the Monitor selected in step 2 is not
highlighted or if the ID numbers of more than one Monitor
are highlighted, press MODE to clear the ID numbers, and
then start the procedure again from the beginning.
CONTRAST
BRIGHT
CHROMA
PHASE
SHARPNESS
sub menu
reset
ADJUST:
PICTURE ADJ.
SELECT:
EXIT:
MENU
VIDEO A
: –01
:
: –02
:
:
00
00
00
CONTRAST
BRIGHT
CHROMA
PHASE
SHARPNESS
sub menu
reset
ADJUST:
PICTURE ADJ.
SELECT:
EXIT:
MENU
VIDEO A
: +01
:
: –02
:
:
00
00
00
CONTRAST
BRIGHT
CHROMA
PHASE
SHARPNESS
sub menu
reset
ADJUST:
PICTURE ADJ.
SELECT:
EXIT:
MENU
VIDEO A
:
:
: –02
:
:
00
00
00
00
CONTRAST
BRIGHT
CHROMA
PHASE
SHARPNESS
sub menu
reset
ADJUST:
PICTURE ADJ.
SELECT:
EXIT:
MENU
VIDEO A
: +02
:
: –02
:
:
00
00
00
When pressing 3 once
Slave 2
Master
Slave 1
Slave XX
MASTER
[00] [00] [00]
Serial Connections and Operations (Continued)
Slave 2
Master
Slave 1
Slave XX
MASTER\[02]
[01] [02] [XX]
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM32
33
ENGLISH
Menu Classifications
Main Menu
PICTURE ADJ.
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
MAIN MENU
SELECT:
EXIT:
MENU
COLOR TEMP.
PICTURE MODE
ASPECT
SIGNAL MODE
RGB INPUT
reset
FUNCTION SELECT
ADJUST:
SELECT:
EXIT:
MENU
: HIGH
: STILL
: PANORAMA
: AUTO
: A
VIDEO A
NTSC
H SIZE
H POSITION
V SIZE
V POSITION
CLOCK PHASE
sub menu
reset
ADJUST:
SIZE/POSITION ADJ.
SELECT:
EXIT:
MENU
: +01
:
: –02
:
:
00
00
00
CONTRAST
BRIGHT
CHROMA
PHASE
SHARPNESS
sub menu
reset
ADJUST:
PICTURE ADJ.
SELECT:
EXIT:
MENU
VIDEO A
: +01
:
: –02
:
:
00
00
00
Main Menu
Size/Position Adjustment Menu
Picture Adjustment Menu
Function Selection Menu
Status Display
+
:+01
CONTRAST
+
:+01
BRIGHT
+
:+01
CHROMA
+
:+01
PHASE
+
:+01
SHARPNESS
:+01
H SIZE
:+01
H POSITION
:+01
V SIZE
+
++
++
+
++
+
+
+
+
+
+
+
+
+
+
+
+
:+01
V POSITION
+
:+01
CLOCK PHASE
Are you sure?
"YES" then press key.
"NO" then press key
MENU
Are you sure?
"YES" then press key.
"NO" then press key
MENU
Are you sure?
"YES" then press key.
"NO" then press key
MENU
Ex. When “VIDEO A” input
is selected
Input currently selected
Input video signal
reset
reset
reset
Appears only when
RGB input is selected.
Adjustable only when
NTSC signals come in.
Appears only when one of
the following preset RGB signals
comes in — RGB15K-50,
RGB15K-60, PC98, VGA480-60,
SVGA-56, SVGA-60, and XGA-60.
(See page 11 for preset signals.)
Appears only when VIDEO A,
VIDEO B, or COMP. (component)
input is selected.
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM33
34
Menu Classifications (Continued)
PICTURE ADJ. (Picture adjustment): See page 16.
CONTRAST Adjusts the contrast of the picture.
BRIGHT Adjusts the brightness of the picture.
CHROMA*** Adjusts the color density of the picture.
PHASE* Adjusts the color phase.
SHARPNESS Adjusts the outlines of the picture.
sub menu Displays the fine adjustment bar.
reset Resets the Picture Adjustment Menu settings to defaults.
SIZE/POSITION ADJ. : See page 17.
H.SIZE Adjusts the horizontal screen size.
H. POSITION Adjusts the horizontal screen position.
V. SIZE Adjusts the vertical screen size.
V.POSITION Adjusts the vertical screen position.
CLOCK PHASE** Adjusts to eliminate stripes or flickering.
Normally, no adjustment is needed.
sub menu Displays the fine adjustment bar.
reset Resets Size/position Adjustment Menu settings to defaults.
FUNCTION SELECT: See pages 19 to 23.
COLOR TEMP. Adjusts the color temperature.
Use when the picture is reddish or bluish.
PICTURE MODE**** Selects the picture quality suited to either the still picture or the moving picture.
ASPECT Selects the horizontal to vertical ratio of the screen.
SIGNAL MODE*** Selects a color system (NTSC, NTSC 4.43, PAL, SECAM) when VIDEO A or VIDEO B input is
selected.
Selects a scan system — 480i, 576i, 480p, 720p, 1080i (1035i) — when COMPONENT input is
selected. Normally, set to “AUTO.”
RGB INPUT Sets the correct RGB terminal you use.
reset Resets the Function Selection Menu settings to defaults.
* Adjustment is not possible when RGB input is selected.
** Adjustment is only possible when viewing NTSC signal through the VIDEO A or B terminal.
*** Adjustment is only possible when RGB input is selected.
****Adjustment is only possible when the RGB15K-50, RGB15K-60, PC98, VGA480-60, SVGA-56, SVGA-60, or XGA-60 signals
come in.
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM34
35
ENGLISH
Setup Menu
Are you sure?
"YES" then press key.
"NO" then press key
MENU
all reset
R GAIN
G GAIN
B GAIN
sub menu
reset
ADJUST:
WHITE BALANCE:HIGH
SELECT:
EXIT:
MENU
: 000
: 001
: 002
White Balance Adjustment Menu
: 000
R GAIN
:+001
G GAIN
:–002
B GAIN
+
+
+
Are you sure?
"YES" then press key.
"NO" then press key
MENU
+
reset
Are you sure?
"YES" then press key.
"NO" then press key
MENU
reset
AUTO SLEEP
CONTROL LOCK
STATUS DISPLAY
VENTILATION MODE
HD SIGNAL MODE
WHITE BALANCE
SET-UP MENU 1/2
ADJUST:
SELECT:
EXIT:
MENU
: 1MIN.
: ON
: ON
: H
: 1080i
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x1000
SET-UP MENU 2/2
ADJUST:
SELECT:
EXIT:
MENU
: ON
: ON
: ON
: ON
: 001
AUTO SLEEP Sets the length of time before standby mode is automatically assumed after the input signal has
stopped being supplied. (See page 25.)
CONTROL LOCK Sets the Monitor so that it cannot be operated with the buttons on itself. (See page 26.)
STATUS DISPLAY Sets if you want the input terminal and the type of signal to be indicated on the screen just after
inputs are switched. (See page 26.)
VENTILATION MODE Adjusts the cooling fan speed according to the Monitor mounting method. (See page 27.)
HD SIGNAL MODE Select the High-Definition (HD) signal type. (See page 27.)
WHITE BALANCE Adjusts R GAIN, G GAIN and B GAIN finely each for “HIGH” and “LOW” settings of the color
temperature. (See page 19.)
PIXEL SHIFT Sets a screen saver. (See page 27.)
POWER SAVE Sets the power save function. (See page 28.)
COLOR-REVERSE Use to reverse the color of the still picture to prevent its afterimage from being left on the screen.
(See page 29.)
REFRESH Use to eliminate afterimages on the screen. (See page 29.)
reset Resets the Setup Menu settings to defaults. (See page 29.)
all reset Resets the all menu settings and adjustments to defaults. (See page 30.)
HOUR METER Use to confirm the hours of use. (See page 25.)
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM35
36
Is the power cord disconnected?
•Is the MAIN POWER switch turned on?
•Is the correct input selected?
•Are the devices connected correctly?
•Are signals being supplied from the
connected devices?
•Is RGB INPUT set correctly if using the
RGB terminals?
•Are input signals (scanning frequency,
etc.) appropriate?
•Is brightness adjusted correctly?
•Is volume set at minimum?
•Are the diagnostic lamps turned on?
•Is the signal RGB input?
•Is brightness adjusted correctly?
•Is picture quality (colour density, etc.)
adjusted correctly?
•Is the correct broadcast system (colour
system) selected?
•Are signals (scanning frequency, etc.) to
connected devices appropriate?
•Is the size or position of the screen
adjusted properly?
•Are the batteries correctly set?
•Are the batteries exhausted?
•Is there any object blocking the path
between the remote control and remote
sensor?
•Is the Monitor too far away from you?
•Is the Monitor connected serially to
another Monitor (Serial Connection)?
•Is the Control Lock function in use?
Troubleshooting
Solutions to common problems related to the Monitor are described here. If none of the solutions presented here solves the
problem, unplug the Monitor and consult an authorized dealer or service center.
Symptom Probable cause Corrective action Page
•Insert the power cord (plug) firmly.
•Turn on the MAIN POWER switch.
•Select the correct input by pressing
VIDEO A, VIDEO B, COMPO. and
RGB on the remote control (or INPUT
on the Monitor).
•Connect the devices correctly.
•Set the devices correctly.
•Set it correctly.
•Check if the signal is appropriate
(scanning frequency, etc.), and input
the appropriate signal.
•Adjust brightness on the menu.
•Adjust volume.
•Refer to “Self-diagnostic indication,”
and take an appropriate action.
•Adjust CLOCK PHASE using the
menu.
•Adjust BRIGHT (brightness) using the
menu.
•Adjust PICTURE using the menu.
•Set SIGNAL MODE (colour system) to
“AUTO.”
•Check if the signal is appropriate
(scanning frequency, etc.), and input
the appropriate signal.
•Adjust H.SIZE, V.SIZE, H.POSITION
or V.POSITION using the menu.
•Insert batteries correctly, observing the
polarities (ª and ·).
•Replace with new batteries.
•Remove any blocking object.
•Move toward the Monitor, then operate
the remote control.
•Only Master Monitor can be controlled
by the remote control when connected
serially.
•Set the Control Lock function to “OFF”
using the menu.
12
14
14
12, 13
23
11
16
14
37
17
16
16
22
11
17
9
9
31
26
Power is not supplied.
Video image does not
appear, or audio
sound does not occur.
The picture becomes
blurred.
Colour is abnormally
dark or bright.
Colour is poor or
unstable.
The picture is cut or
shifted toward one
side.
The remote control
does not work.
The buttons on the
Monitor do not work.
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM36
37
ENGLISH
Self-diagnostic Indication
The screen monitor may automatically turn off and self-diagnostic lamps next to the power lamp may light or flash.
When something abnormal occurs with the Monitor, this function informs you of the condition of the Monitor with self-
diagnostic lamps, allowing for smooth service work.
If the self-diagnostic lamps glow or flash in red, use the following procedure before consulting the dealer where you purchased
the Monitor.
1
Check which lamps are lighting or flashing.
On the Self-diagnostic Report Sheet (below), check the box next to “Lights” or “Flashes” of the corresponding lamp or
lamps.
Depending on a particular case, only one lamp may light or flash, or all three lamps may do so.
2
Turn off the MAIN POWER switch on the back of the Monitor.
3
Unplug the power cord.
4
Call your dealer and tell which lamps are lighting or flashing. (Copy and fax the Self-
diagnostic Report Sheet below.)
Note:
If you turn on the Monitor soon after turning it off (or after recovering from a brief power interruption), the self-diagnostic
lamps may light (or flash), and no image may appear on the screen. In this case, turn off the Monitor again, wait for about 10
seconds, then turn it on again. If no self-diagnostic lamps light or flash, you can operate and use the Monitor as usual.
The self-diagnostic lamps light or flash as listed on the following
table. Please give me immediate advice or service if necessary.
MENU INPUT POWER
Self-diagnostic lamps (1 to 3)
Remote sensor
Power lamp
1
2
3
Self-diagnostic lamps
Upper1
2 Middle
3
NO. Lamp position Conditions
Lower
& Flashes
& Flashes
& Flashes
& Lights
& Lights
& Lights
Your Name:
Telephone No.:
Address:
Store name where you purchased the Monitor
To
Model Name:
Plasma Display Monitor
GD-V4210PZW/GD-V4210PZW-G
GD-V4210PCE/GD-V4210PCE-G
GD-V4211PCE
Self-diagnostic Report Sheet
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM37
38
Specifications
General
*
1
*
1
*
1
*
1
*
1
*
1
*
1
*
1
*
1
*
1
Model name GD-V4210PZW / GD-V4210PZW-G GD-V4210PCE / GD-V4210PCE-G /
GD-V4211PCE
Frame color GD-V4210PZW: Silver GD-V4210PCE / GD-V4211PCE: Silver
GD-V4210PZW-G: Gray GD-V4210PCE-G: Gray
Screen size Type 42 wide format
Aspect ratio 16:9 (Wide format)
Number of pixels displayed 853 (H) x 480 (V)
Number of colors displayed 16.77 million (256 colors for each of RGB)
Effective screen size 92.1 cm x 51.8 cm (36-3/8” x 20-1/2”), 105.7 cm (41-5/8”)
(W x H, Diagonally)
Weight 35.8 kg (78.8 lbs.)
External dimensions 103.5 cm x 64.0 cm x 8.9 cm (40-3/4” x 25-1/4” x 3-5/8”)
(W x H x D) * Excluding protruding parts
Power requirements AC 120 V / AC 230 V, 50 Hz/60 Hz
Rated input current 3.5 A (AC 120 V) / 1.9 A (AC 230 V)
Compatible systems
VIDEO A, B input NTSC, NTSC 4.43, PAL, SECAM
COMPONENT input 480i, 576i, 480p, 720p, 1080i (1035i)
Audio power output INTERNAL: 2 W + 2 W (TYP at impedance 8 )
EXTERNAL: 3 W + 3 W (TYP at impedance 6 )
Built-in speakers 2 pcs., 4 cm x 7 cm oval-shaped, impedance 6
Operating conditions Temperature: 0 °C to 40 °C
Relative humidity: 20 % to 80 % (non-condensation)
VIDEO A
Video input BNC terminal x 1, 1 V(p-p), 75
Video output BNC terminal x 1, 1 V(p-p), 75
Audio input Pin jack terminal x 2 (L/R)
500 mV(rms), high impedance
VIDEO B
Y/C input Y/C terminal x 1
Y: 1 V(p-p), 75
C: 0.286 V(p-p), 75 (for NTSC)
C: 0.3 V(p-p), 75 (for PAL/SECAM)
Video input Pin jack terminal x 1, 1 V(p-p), 75
Audio input Pin jack terminal x 2 (L/R)
500 mV(rms), high impedance
COMPONENT
COMPONENT input BNC terminal x 3
Y: 1 V(p-p), 75
P
B/B-Y: 0.7 V(p-p), 75
PR/R-Y: 0.7 V(p-p), 75
Audio input Pin jack terminal x 2 (L/R)
500 mV(rms), high impedance
Input/output terminals*
1
AV terminals*
1
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM38
39
ENGLISH
Model name GD-V4210PZW / GD-V4210PZW-G GD-V4210PCE / GD-V4210PCE-G /
GD-V4211PCE
RGB A
RGB input D-sub 3-row 15-pin terminal x 1,
Video signal: 0.7 V(p-p), 75
Sync signal: TTL level
RGB B
RGB input BNC terminal x 5 (Bridge connection possible, auto termination)
Analog RGB:
R: 0.7 V(p-p), 75 G: 0.7 V(p-p), 75 B: 0.7 V(p-p), 75
G on sync: 1 V(p-p), 75 (negative sync)
Horizontal sync/Composite sync (HD/Cs):
HD: 1 V(p-p) to 5 V(p-p), high impedance (positive/negative polarity)
Cs: 1 V(p-p) to 5 V(p-p), high impedance (positive/negative polarity)
Vertical sync (VD):
VD: 1 V(p-p) to 5 V(p-p), high impedance (positive/negative polarity)
RGB output BNC terminal x 5 (Loop through output for bridge connection)
AUDIO
Audio input Pin jack terminal x 2 (L/R)
500 mV(rms), high impedance (for RGB A or RGB B)
REMOTE 1 (RS232C) terminal D-sub 9-pin terminal x 1
REMOTE 2 (JVC CODE) Stereo mini jack terminal x 2
IN/OUT terminals
SPEAKER OUT terminal Impedance 6 to 16
AUDIO output terminal Pin jack terminal x 2 (L/R)
Output impedance 600
Input/output terminals*
1
RGB terminals
*
1
GD-V4210PCE, GD-V4210PCE-G, and GD-V4211PCE do not have the following input terminals – VIDEO A, VIDEO B, and
COMPONENT.
You need to install the video interface kit (IF-C421P1W), which is separately purchased, to reproduce input images for VIDEO
A, VIDEO B, and COMPONENT.
For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be more or
less different from actual products.
Design and specifications are subject to change without notice.
IBM and IBM PC are registered trademarks of International Business Machines Corporation. Macintosh is registered
trademarks of Apple Computer, Inc.
All other product names mentioned herein are used for identification purposes only, and may be the trademarks or registered
trademarks of their respective companies.
Options (not supplied)
Stand Unit TS-C420P1W, TS-C420P4W, TS-C420P5W, TS-C420P7W
Wall Mounting Unit TS-C420P2W, TS-C420P6W
Ceiling suspension Unit TS-C420P3W
Video Interface Kit IF-C421P1W (Only for GD-V4210PCE , GD-V4210PCE-G, and GD-V4211PCE)
Notice on transportation
This Monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from other than JVC or JVC-authorized dealers.
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM39
40
Specifications (Continued)
Pin assignment (Specifications for terminals)
Y/C terminal
RS-232C terminal
This is a female type connector.
1
2
34
Pin number Signal name
1 GND (Y)
2 GND (C)
3Y
4C
Pin number Signal name
1 DCD
2RD
3TD
4 DTR
5 GND
Pin number Signal name
6 DSR
7RTS
8 CTS
9RI
4
3
2
1
9
8
5
7
6
RGB Input Terminal
Pin number Signal name
1 Red
2 Green
3Blue
4 N/C
5 GND
6 GND
7 GND
8 GND
Pin number Signal name
9 N/C
10 GND
11 GND
12 N/C
13 HD/Cs
14 VD
15 N/C
External GND
1
2
8
4
5
6
7
3
9
10
11
12
13
14
15
Unit: mm (inch)
Side view
Top view
Front view
Dimensions
MENU INPUT POWER
1035 (40 )
/
4
3
89 (3 )
11 ( )
/
2
1
57.5 (2 )
/
8
3
570 (22 )
/
2
1
17
( )
/
16
11
997 (39 )
/
8
3
940 (37 )
/
8
1
921 (36 )
/
8
3
640 (25 )
/
4
1
577 (22 )
/
4
3
518.4 (20 )
/
2
1
/
8
5
31-40.GD-V4210PZW[EN]/f 00.9.29, 5:56 PM40
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC GD-V4211PCE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC GD-V4211PCE in de taal/talen: Engels als bijlage per email.

De handleiding is 0,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info