56211
32
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
Filename [MV5S_08Basic TimerDub.fm]
Masterpage:Left+
32 EN
TIMER RECORDING
Page 32Wednesday, 31 August 2005 16:55
On-Disc Timer Programming is a function used with discs that are
especially intended for a specific programme. The disc is then
programmed for a programme you always watch every day or
every week. Since older programmes are automatically
overwritten, a single DVD-RAM/RW (VR mode) disc can be used
without worrying about how much recording capacity remains.
( pg. 33)
You can programme each disc to timer-record as many as
8 programmes.
To Make The Disc For On-Disc Timer Programming
1 Load a recordable disc.
2 Press DVD so that the DVD lamp lights up on the unit.
3 Press PROG to access the Programme Check screen.
4 When On-Disc Timer Programming is made for the first
time on the disc
Press rt to select “DISC TIMER PRGM”, then press ENTER.
When some programmes are recorded on the disc, a caution
message appears. In such a case, backup the programmes as
required, then format the disc before making On-Disc Timer
Programming. ( pg. 89)
When On-Disc Timer Programming has already been made on
the disc
Press rt to select “NEW TIMER PROGRAMME”, then press
ENTER.
5 Press rt to set the desired date.
The current date appears on the TV screen. The date you enter
appears in its place.
6 Press we to select “START”, then press rt to set the desired
start time.
Each press of rt advances/goes back the start time in 1-min.
increments.
To advance/go back the start time in 30-min. increments, press and
hold rt.
7 Press we to select “STOP”, then press rt to set the desired
stop time.
Each press of rt advances/goes back the stop time in 1-min.
increments.
To advance/go back the stop time in 30-min. increments, press and
hold rt.
8 Press we to select “TV PROG”, then press rt to select the
desired channel.
9 Set “DAILY/WEEKLY” option.
Refer to step 6 in “SHOWVIEW™ Timer Programming” ( pg. 29).
It is necessary to set “DAILY/WEEKLY” option for On-Disc Timer
Programming. ( pg. 30, “Weekly/Daily Recording”)
10 Set the other recording options as required.
You can select XP, SP, LP, EP or FR480 mode for “REC MODE”.
However, you cannot select FR (JUST), FR60–FR360 and FR420.
Refer to step 6 in “SHOWVIEW™ Timer Programming” ( pg. 29).
It is not possible to use the Free Rate function. ( pg. 62)
11 Press ENTER to access the Programme Confirmation screen.
12 Press ENTER to complete timer programming.
To programme another timer, repeat steps 3 12.
To Timer-record The Programme With The Programmed Disc
1 Load a programmed disc.
2 Press TIMER #. The unit turns off and “ appears on
the front display panel. The DVD timer indicator also lights up on
the unit and the unit is automatically turned off.
To disengage the timer mode, press TIMER # again.
NOTES:
On-Disc Timer Programming is not possible on a DVD-RW disc
formatted in video mode. ( pg. 89)
The information of a programme recorded with On-Disc Timer
Programming is not stored in the library. ( pg. 71)
The play list is not created for the programmes recorded with On-Disc
Timer Programming. (
pg. 68)
Basic Recording (
pg. 26), SHOWVIEW Timer Programming
( pg. 29), Manual Timer Programming ( pg. 31) are not possible
on the On-Disc Timer programmed disc.
The beginning of a programme may not be recorded. Also, if the 1st
programme’s recording stop time and the 2nd programme’s recording
start time is the same, the ending of the 1st programme may not be
recorded.
If there is a power cut while recording, the recordings before the
power cut are not guaranteed.
On-Disc Timer Programming (DVD Deck
Only)
Make sure that the unit’s built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
A
TTENTION:
On-Disc Timer Programming is possible only with the disc for On-
Disc Timer Programming.
If data is recorded on a disc for On-Disc Timer Programming using
a unit from another manufacturer, On-Disc Timer Programming
may no longer function properly.
rtwe
ENTER
PROG
TIMER
DVD
Satellite Receiver Users
To timer-record a satellite broadcast using the On-Disc Timer
Programming function:
A Perform “On-Disc Timer Programming (DVD Deck Only)”.
B Set the satellite receiver to the appropriate channel before
the selected programme begins.
C Select “L-2” in step 8.
D Leave the satellite receiver’s power on.
MV5S_00.book Page 32 Wednesday, August 31, 2005 4:55 PM
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC DR-MV5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC DR-MV5 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van JVC DR-MV5

JVC DR-MV5 Gebruiksaanwijzing - Nederlands - 100 pagina's

JVC DR-MV5 Gebruiksaanwijzing - Deutsch - 100 pagina's

JVC DR-MV5 Gebruiksaanwijzing - Français - 100 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info