56211
29
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
Masterpage:Right0
EN 29
Filename [MV5S_08Basic TimerDub.fm]
Page 29Wednesday, 31 August 2005 16:55
TIMER RECORDING
You can programme each deck to timer-record as many as
8 programmes up to 30 days ahead.
With the S
HOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
HOWVIEW number.
NOTES:
There may be cases that the SHOWVIEW Timer Programming function
prolongs the stop time of the programming.
When two successive programmes are recorded on a DVD-RW disc
with the SHOWVIEW Timer Programming function, the beginning of the
second one may be left off the recording.
SHOWVIEW Timer Programming is not possible on the discs used
exclusively for On-Disc Timer Programming.
If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
To record the programmes received by the satellite receiver, record
on the DVD discs. For details, refer to “Satellite Receiver Users (DVD
Deck Only)” above.
1 Press DVD or VHS to select the deck on which you want to
perform timer programming.
2 For DVD deck
Load a recordable disc.
For VHS deck
Load a cassette with safety tab intact.
3 Press SHOWVIEW to access the SHOWVIEW screen.
4 Press the number buttons to
enter the S
HOWVIEW number of a
programme you wish to record,
then press ENTER.
If you have made a mistake, press
CANCEL and input the correct
number before you press ENTER.
To clear all entered numbers at a
time, press CLEAR (8).
If the number you entered is
invalid, “SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO.
THEN RETRY” appears on the TV screen. Input a valid S
HOWVIEW
number.
If “GUIDE PROGRAMME IS NOT SET” appears on the TV screen,
set Guide Program numbers manually. ( pg. 83)
When “PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME” appears on the TV screen, you need to cancel some
of the reserved programmes. ( pg. 34)
5 The SHOWVIEW number you entered and the matching timer-
recording information are displayed on the TV screen. Check the
programme data.
To cancel this setting, press RETURN.
6 Press we to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
“STOP” (To advance/go back the stop time by 30 minutes, press and
hold rt).
“DAILY/WEEKLY” ( pg. 30, “Weekly/Daily Recording”)
“VPS/PDC” ( pg. 30, “VPS/PDC Recording”)
“REC MODE” ( pg. 27, 28, “Recording Mode”)
“NAME” ( pg. 67, “Modify Title Name”) (DVD deck only)
7 Press ENTER to access the Programme Confirmation screen.
8 Press ENTER to complete timer programming.
To programme another timer, repeat steps 3 8.
If “PROGRAMME OVERLAPPED” appears on the TV screen, see
page 35.
9 Press TIMER # to engage the unit’s timer mode. The DVD timer
indicator lights up on the unit and the unit is automatically turned
off.
To disengage the timer mode, press TIMER # again.
SHOWVIEW™ Timer Programming
Make sure that the unit’s built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/DVD switch to DVD.
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s
channel number has been changed, the wrong channel number will
be displayed on the SHOWVIEW programme screen in step 5. When
this happens, set the correct Guide Program number for that station.
(
pg. 83, “SHOWVIEW
TM
System Setup”)
Satellite Receiver Users (DVD Deck Only)
To timer-record a satellite broadcast using the S
HOWVIEW
system:
A PerformS
HOWVIEW™ Timer Programming”.
B Set the satellite receiver to the appropriate channel before
the selected programme begins.
C Leave the satellite receiver’s power on.
ENTER
CLEAR ( )
DVD
0 – 9
VHS
CANCEL
SHOWVIEW
TIMER
RETURN
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see “SHOWVIEW
TM
System Setup” ( pg. 83) and
set the Guide Program number correctly.
123
456
789
0
SP
1234
SHOWVIEW PRGM
DATE
START
STOP TV PROG
DAILY/WEEKLY
VPS/PDC
ON
NAME
ENTER SHOWVIEW CODE WITH [0 - 9] KEYS
THEN PRESS [ENTER]
OK
REC MODE
SHOWVIEW NO.
MV5S_00.book Page 29 Wednesday, August 31, 2005 4:55 PM
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC DR-MV5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC DR-MV5 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van JVC DR-MV5

JVC DR-MV5 Gebruiksaanwijzing - Nederlands - 100 pagina's

JVC DR-MV5 Gebruiksaanwijzing - Deutsch - 100 pagina's

JVC DR-MV5 Gebruiksaanwijzing - Français - 100 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info