56182
14
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
CU-VD40
E/EK/ER
DVD Burner
INSTRUCTIONS
LYT1752-002B
CU-VD40E_EN.book Page 1 Wednesday, June 6, 2007 10:40 AM
2
Enjoy High Definition Images Copied to DVDs!
A Connect.
B Select the desired copy method.
The following 6 methods of copying are available.
z The date for videos created from playlists will be the same as the date the DVD is created.
C Copy to DVD.
Select and set on “EXECUTE AND FINALIZE”.
z Additional recordings are not possible after finalising.
To add new recordings
z Select and set on “EXECUTE” instead of “EXECUTE AND FINALIZE”.
z Discs that are not finalised cannot be played back on PC or this burner.
To play back, connect as shown in the diagram above, and refer to pages 48 to 50 of the GZ-HD7 instruction manual.
Copying to DVD
Methods of copying Types of copy operation
GZ-HD7
instruction manual
Copy all
(NORMAL BACK-UP)
Copy all images shot.
0Page 48
Copy only newly shot images.
0Page 48
Copy only favourite scenes
(SELECT BACK-UP)
Search and copy by date.
0Page 49
Search and copy by scenes.
0Page 49
Search and copy by events.
0Page 49
Copy using playlists.
0Page 49
z For details on finalising, refer to
pages 48 to 50 of the GZ-HD7
instruction manual.
z Time taken for copying will be
long if there are a large number
of files.
Audio/Video cable
(provided)
(provided)
DVD(DL)
DVD
3
5
CANCEL
SELECT
SET TOP
EXECUTE
EXECUTE AND FINALIZE
CU-VD40E_EN.book Page 2 Wednesday, June 6, 2007 10:40 AM
3
A Connect.
A Disconnect the USB cable and turn off this burner.
B Connect the burner to the TV.
z To view high definition images, connect using an optional HDMI cable or component video cable.
B Play back.
A Turn on the burner.
z Confirm that the power lamp is lighted in orange. If the lamp is not lighted in orange, disconnect the USB cable then turn
off and on the power again.
B Press the open/close (M) button to eject the tray.
C Insert a finalised disc.
D Press the open/close (M) button to close the tray.
E Play back.
z For details on playback, refer to page 15 of this instruction manual.
.................................................................................................................................................................
.
Before erasing data from GZ-HD7
z Confirm that the data has been copied to DVD before erasing.
Viewing Images Copied to DVD on the TV
z The following screen appears.
Audio/Video cable
(provided)
Approx. 20 seconds later
PLAY IMAGEPLAY VIDEO
CU-VD40E_EN.book Page 3 Wednesday, June 6, 2007 10:40 AM
4
This burner enables DVDs of videos recorded with the
JVC Hard Disk Camera to be created without using a PC.
If you want to edit videos recorded with the camera and create
your original DVDs, use the software provided with the
camera for editing and creating DVDs.
The provided data writing software Power2Go 5.5 Lite can be
used for writing data. However, it cannot be used to edit
videos or create DVDs.
The burner does not include support for Macintosh.
SOME DO’S AND DON’TS ON THE SAFE
USE OF EQUIPMENT
This equipment has been designed and manufactured to meet
international safety standards but, like any electrical
equipment, care must be taken if you are to obtain the best
results and safety is to be assured.
DO read the operating instructions before you attempt to use
the equipment.
DO ensure that all electrical connections (including the mains
plug, extension leads and interconnections between pieces of
equipment) are properly made and in accordance with the
manufacturer’s instructions. Switch off and withdraw the mains
plug when making or changing connections.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any
doubt about it working normally, or if it is damaged in any way
^ switch off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous
voltages.
DON’T leave equipment switched on when it is unattended
unless it is specifically stated that it is designed for unattended
operation or has a standby mode. Switch off using the switch on
the equipment and make sure that your family knows how to do
this.
Special arrangements may need to be made for infirm or
handicapped people.
DON’T use equipment such as personal stereos or radios so
that you are distracted from the requirements of road safety. It is
illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can
permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example
with curtains or soft furnishings. Overheating will cause
damage and shorten the life of the equipment.
Dear Customer,
Thank you for purchasing this burner. Before use, please read the
safety information and precautions contained in pages 4 and 5 to
ensure safe use of this product.
Safety Precautions
IMPORTANT:
In the event that any of the following occur, remove the plug and
make a request for repair to the dealer.
Smoke or abnormal odour is emitted
Damage from being dropped
Water or an object enters inside
CAUTION:
A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT
USES A VISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE
TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO
NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE
DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE
INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
REPRODUCTION OF LABELS
WARNING LABEL INSIDE OF THE UNIT
This unit applies to the standard “IEC60825-1:2001” for laser
products.
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
ATTENTION:
This unit contains microcomputers. External electronic noise or
interference could cause malfunctioning. In such cases, switch the
unit off and unplug the mains power cord. Then plug it in again and
turn the unit on. Take out the disc. After checking the disc, operate
the unit as usual.
CAUTION:
To avoid electric shock or damage to the
unit, first firmly insert the small end of the
power cord into the AC Adapter until it is no
longer wobbly, and then plug the larger end
of the power cord into an AC outlet.
If malfunctioning occurs, stop using the unit immediately and
consult your local JVC dealer.
Caution on Replaceable lithium battery
The battery used in this device may present a fire or chemical burn
hazard if mistreated.
Do not recharge, disassemble, heat above 100% or incinerate.
Replace battery with Panasonic (Matsushita Electric), Sanyo, Sony
or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is incorrectly
replaced.
Dispose of used battery promptly.
Keep away from children.
Do not disassemble and do not dispose of in fire.
WARNING:
Batteries shall not be exposed to excessive heat such as direct
sunshine, fire or the like.
Dear Customer,
This apparatus is in conformance with the valid European
directives and standards regarding electromagnetic compatibility
and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technology Centre Europe GmbH
Postfach 10 05 52
61145 Friedberg
Germany
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical
and electronic equipment should not be
disposed as general household waste at its
end-of-life. Instead, the product should be
handed over to the applicable collection
point for the recycling of electrical and
electronic equipment for proper treatment,
recovery and recycling in accordance with
your national legislation.
By disposing of this product correctly, you
will help to conserve natural resources and
will help prevent potential negative effects on the environment and
human health which could otherwise be caused by inappropriate
waste handling of this product. For more information about
collection point and recycling of this product, please contact your
local municipal office, your household waste disposal service or
the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
(Business users)
If you wish to dispose of this product, please visit our web page
www.jvc-europe.com
to obtain information about the take-back of
the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance
with applicable national legislation or other rules in your country for
the treatment of old electrical and electronic equipment.
Attention:
This symbol is only
valid in the European
Union.
CU-VD40E_EN.book Page 4 Wednesday, June 6, 2007 10:40 AM
5
DON’T use makeshift stands and NEVER fix legs with wood
screws ^ to ensure complete safety always fit the
manufacturer’s approved stand or legs with the fixings provided
according to the instructions.
DON’T allow electrical equipment to be exposed to rain or
moisture.
ABOVE ALL
NEVER let anyone especially children push anything into
holes, slots or any other opening in the case ^ this could
result in a fatal electrical shock;
NEVER guess or take chances with electrical equipment of
any kind ^ it is better to be safe than sorry!
Safety Precautions for the Burner
Be sure to observe the following precautions. Failing to do so
may result in electric shock, fire, injury, or malfunction.
Do not disassemble, dismantle, or modify the equipment.
Requests for repair and inspection should be made to the
dealer.
Do not insert metal or combustible objects or pour water or
other liquids inside the burner.
Turn off the power when connecting equipment.
Remove the plug when the burner will not be used for a
prolonged time or prior to cleaning (electricity flows through
the equipment even when the power is off).
Do not block the ventilation holes of the burner.
Do not use where there is condensation. Suddenly carrying
the burner from a cold location to a hot location may result in
the formation of drops, which may cause a malfunction or
failure.
Do not cause the burner to vibrate when discs are in.
Safety Precautions for Accessories
When using the AC adapter, the power cord, and the USB
cable, be sure to observe the following precautions. Failing to
do so may result in electric shock, fire, injury, or malfunction.
Do not insert or remove the plug when your hands are wet.
Fully insert the plug into the outlet.
Keep dust and metal objects away from the plug.
Do not damage the cord.
Place the cord where it will not trip someone up.
Do not use when thunder can be heard.
Do not dismantle.
Do not use for any product other than this one.
Do not play the provided CD-ROM with an audio player. Doing
so may damage the circuits or speakers.
Safety Precautions for Discs
Do not use the following discs.
Cracked discs
Deeply scratched discs
Installation
Do not install in any of the following locations.
Humid location
Location of 60 °C or above
Location subject to direct sunlight
Location where overheating is likely
Dusty or smoky locations
Locations subject to oily smoke or steam such as a kitchen
counter or beside a humidifier
Unstable location
Bathroom
Dusty places
Slanted location
Cleaning Procedure
IMPORTANT:
Be sure to unplug the burner before beginning cleaning.
Do not use liquid or aerosol cleaners.
Ensure that no moisture or liquid comes into contact with the
drive during cleaning.
Exterior of the Burner:
Wipe dirt off with a dry cloth.
Disc Tray:
Wipe off dirt with a soft dry cloth.
Disc:
Gently wipe from the inner edge
to the outer edge with a soft cloth.
Storage:
Make sure that discs are kept in their cases. If discs are piled on
top of one another without their protective cases, they can be
damaged. Do not put discs in a location where they may be
exposed to direct sunlight, or in a place where the humidity or
temperature is high. Avoid leaving discs in your car!
Region Codes
Region codes are numbers for restricting DVD video playback.
The world is separated into six regions and each region is
identified by a number. If the number for a disc does not match
the number for the player, the disc cannot be played on the
player. (The initial region code is indicated on the label on the
bottom of the burner.)
Disclaimer
JVC accepts no liability whatsoever for loss of data resulting
from inappropriate connections or handling.
Copyrights
Duplicating copyright protected material, for other than personal
use, without the permission of the copyright holder is prohibited
by copyright law.
Registered Trademarks and
Trademarks
Windows
®
is either registered trademark or trademark of
Microsoft Corporation in the United States and/or other
countries.
Macintosh and Mac OS are trademarks of Apple Computer,
Inc., registered in the United States and other countries.
Pentium is a registered trademark of Intel Corporation in the
United States.
Manufactured under licence from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby
Laboratories.
HDMI, HDMI logo and high definition multimedia interface are
trademarks or registered trademarks of HDMI Licensing LCC.
Other company and product names mentioned herein are
registered trademarks and/or trademarks of their respective
holders.
IMPORTANT (for owners in the U.K.)
Connection to the mains supply in the United Kingdom.
DO NOT cut off the mains plug from this equipment.
If the plug fitted is not suitable for the power points in your home or
the cable is too short to reach a power point, then obtain an
appropriate safety approved extension lead or consult your dealer.
In the unlikely event of the plug fuse failing be sure to replace
the fuse only with an identical approved type, as originally
fitted, and to replace the fuse cover. If the fuse fails again
consult your nearest JVC dealer.
If nonetheless the mains plug is cut off be sure to remove the fuse
and dispose of the plug immediately, to avoid possible shock
hazard by inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains plug then follow the
instructions given below:
DO NOT make any connection to the Larger Terminal coded E or
Green.
The wires in the mains lead are coloured in accordance with the
following code:
If these colours do not correspond with the terminal identifications
of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured Black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt ^ consult a competent electrician.
The C/B button does not completely shut off mains power from the
unit, but switches operating current on and off. ABB shows
electrical power standby and ACB shows ON.
Blue to N (Neutral) or Black
Brown to L (Live) or Red
ATTENTION:
On placing the unit:
Some TVs or other appliances generate strong magnetic fields. Do
not place such appliances on top of the unit as it may cause picture
disturbance.
When moving the product:
Press C/B to turn off the power, and wait at least 30 seconds before
unplugging the power cord. Then, wait at least 2 minutes before
moving the product.
CU-VD40E_EN.book Page 5 Wednesday, June 6, 2007 10:40 AM
6
Contents
Enjoy High Definition Images Copied to DVDs! .........................2
Copying to DVD ............................................................................................ 2
Viewing Images Copied to DVD on the TV................................................... 3
Safety Precautions .....................................................................4
Contents.....................................................................................6
Getting Started ...........................................................................7
Accessories .................................................................................................. 7
Placing the Burner ........................................................................................ 7
Inserting a Disc............................................................................................. 7
Preparing the Remote Control ...................................................................... 7
Guide to Parts and Controls.......................................................8
Connecting to TV .......................................................................9
Connecting to a TV with HDMI Input Terminal ............................................. 9
Connecting to a TV with Component Video Input Connectors..................... 9
Connecting to a TV with Video/Audio Input Connectors ............................ 10
Saving Everio Camera Images to DVD....................................11
To Connect ................................................................................................. 11
Creating Data/DVD Video Discs................................................................. 11
Saving PC Images to DVD .......................................................12
To Connect ................................................................................................. 12
Saving to a DVD ......................................................................................... 12
Computers That Can Be Used ................................................................... 12
Installing CyberLink Power2Go 5.5 Lite ..................................................... 13
CyberLink Power2Go 5.5 Lite Contact Information .................................... 13
Folder Configuration.................................................................14
Viewing Images Saved in DVD ................................................15
Viewing Videos Saved from High Definition Everio Camera ...................... 15
Viewing Still Images Saved from High Definition Everio Camera............... 17
Viewing DVD Videos Saved from Everio Camera....................................... 18
Viewing High Quality Images ...................................................19
Changing the Settings..............................................................20
Menu Operation Procedures ...................................................................... 20
Setting Items And Contents........................................................................ 21
Screen Display .........................................................................22
Troubleshooting .......................................................................23
Error Messages........................................................................24
Specifications ...........................................................................25
DVD Burner
CU-VD40
ENGLISH
CU-VD40E_EN.book Page 6 Wednesday, June 6, 2007 10:40 AM
7
Getting Started
CAUTION:
z Do not use the provided AC adapter and power cord with other devices. In addition, do not use AC adapter, power cord and
USB cable other than those provided with this burner. Doing so may result in electric shock or fire.
When handling a disc, be sure not to touch the playback/recording side of the disc.
Use only the [M] button on the burner or the remote control to eject the disc tray. If you open the tray manually,
there is a risk of the disc dropping out or getting caught.
A battery is included inside the remote control at the time of purchase. Remove the insulation sheet before use.
Accessories
Audio/Video cablePower cord AC adapter
(AP-V400U)
USB cable
Remote control
(RM-V41U)
Recording disc (DVD-R DL)
(For use with high definition Everio Camera.
Cannot be used with an Everio Camera.)
CD-ROM Lithium Battery (CR2025)
Pre-installed in the remote
control unit.
Stand
Placing the Burner
Bottom surface
Stand (provided)
Vent
Horizontal orientation
z Take note of the top and bottom of the burner and
place it in the horizontal orientation.
Vertical orientation
z When using in the vertical orientation, align the vent of
the burner with that of the provided stand, then place
and fix the burner securely on the stand.
Inserting a Disc
Vertical orientation Horizontal orientation
Preparing the Remote Control
To Reinsert the Battery
z Pull out the battery holder by pressing the lock tab.
Lithium Battery
(CR2025)
Lock Tab
CU-VD40E_EN.book Page 7 Wednesday, June 6, 2007 10:40 AM
8
Guide to Parts and Controls
.................................................................................................................................................................
.
Front
.................................................................................................................................................................
.
Rear
.................................................................................................................................................................
.
Remote control
A Open/Close Button (M)
B Power Button (C/B)
C Power Lamp
Green light:
When connected to Everio camera or
PC.
Orange light:
During playback.
D Play/Pause Button (I/W)
E Stop Button (o)
F Previous Button (S)
G Next Button (T)
H Disc Tray
A DC Connector
B USB Connector
C Cooling Fan
D HDMI Terminal
E COMPONENT VIDEO OUT Connectors
F AUDIO Output Connectors
G VIDEO Output Connector
A OPEN/CLOSE Button (M)
B SET UP Button
C TOP MENU Button
D Selection keys ( / / / )
E STOP Button (o)
F PREVIOUS Button (S)
G REV Button (O)
H FWD Button (N)
I PLAY/PAUSE Button (I/W)
J TOOL Button
K RESOLUTION Button
L ON SCREEN Button
M MENU Button
N ENTER Button
O RETURN Button
P Skip Button (v)
Q Replay Button (
w)
R NEXT Button (T)
H
AB
CD E F G
DC
AUDIO
COMPONENT VIDEO OUT
R
P
R PB Y
LVIDEO
A
B
C
D
E
GF
I
H
G
F
E
D
C
B
A
J
K
L
M
N
O
P
Q
R
CU-VD40E_EN.book Page 8 Wednesday, June 6, 2007 10:40 AM
9
Connecting to TV
To view high definition images, connect using an optional HDMI cable or component video cable.
NOTES:
z Images can only be displayed on a High-bandwidth Digital Content Protection (HDCP) monitor. (0P24)
z When images do not appear normally, set the “HDMI COLOR SETTING” in the setting menu to “RGB”. (0P21)
Connecting to a TV with HDMI Input Terminal
DC
AUD IO
COMPONENT VIDEO OUT
R
P
R PB Y
L VIDEO
HDMI
This burner
TV
HDMI cable (not provided)
Connecting to a TV with Component Video Input Connectors
DC
AUD IO
COMPONENT VIDEO OUT
R
P
R PB Y
L VIDEO
LYCB/PBCR/PR R
AUDIO IN
This burner
TV
Component video cable
(not provided)
Audio cable (not provided)
Component video cable
Y=Green / P
B=Blue
P
R=Red
Audio cable
L=White / R=Red
CU-VD40E_EN.book Page 9 Wednesday, June 6, 2007 10:40 AM
10
Connect the output connectors of the burner to the input connectors of the TV with the provided Audio/Video
cable.
Connecting to a TV with Video/Audio Input Connectors
DC
AUD IO
COMPONENT VIDEO OUT
R
P
R
P
B
Y
L VIDEO
L VIDEO INR
AUDIO IN
This burner
TV
Audio/Video cable (provided)
Audio/Video cable
R=Red
L=White
VIDEO=Yellow
CU-VD40E_EN.book Page 10 Wednesday, June 6, 2007 10:40 AM
11
Saving Everio Camera Images to DVD
You can easily create data discs by connecting the burner to an Everio camera.
PREPARATIONS:
z Power/Mode switch (Everio camera) : Off
z Power switch (This burner) : Off
z The positions of DC connector and USB connector and
indications (On/Off) of the Power/Mode switch may be
different for some Everio camera models.
z During saving, there is no output from the HDMI terminal
or COMPONENT VIDEO OUT connectors of this burner.
The video image can be displayed from the Everio
camera’s LCD monitor or by connecting the Everio camera
to a TV.
CAUTION:
z When recording an event (such as athletics meet) with an
Everio camera, it is advisable to use the same recording
mode throughout. Changing the recording mode will
cause an event to be divided and saved into two or more
folders.
z When there is a disc in the burner, do not subject the
Everio camera or burner to vibration or mechanical shock.
PREPARATIONS:
z Power/Mode switch (Everio camera) : On
z Power switch (This burner) : On
A Press the [OPEN/CLOSE] button
after the menu appears on the
Everio.
z The disc tray opens.
B Insert a disc.
z We recommend you to use a compatible disc.
(0P25)
C Press the [OPEN/CLOSE] button.
z The disc tray closes.
D Create data/DVD video discs.
z Refer to the Everio camera instruction manual on how
to create data/DVD video discs.
NOTES:
z Data discs cannot be played on DVD recorders/players.
z DVDs created with GZ-MG series Everio camera equipped
with the direct DVD creation function are DVD video
discs, not data discs. (For details, refer to the instruction
manual of the Everio camera.)
z A disc cannot be ejected while data is being written to the
disc. Wait until writing finishes.
z The remote control cannot be operated when the burner is
connected to the Everio camera via USB cable.
z A considerable amount of time is required if over 1000
video or still images are being saved to DVD, therefore it is
advisable to back up in advance.
............................................................................
.
When a disc cannot be ejected
When a disc cannot be ejected with the [OPEN/
CLOSE] button, use the following procedure to eject
by force.
a Turn off the power.
b Insert a thin rod of about 10 cm long into the force
eject hole located on the right side of the burner.
The disc tray will be ejected for about 1 cm.
c Pull out the disc tray manually and take out the
disc.
z Be sure to place the burner horizontally.
To Connect
Creating Data/DVD Video Discs
DC
AUDIO
COMPONENT VIDEO OUT
R
P
R PB Y
LVIDEO
USB cable
(provided)
USB
DC
AC adapter
(provided for the camera)
USB
DC
AC adapter
(provided for the burner)
Power cord
(provided)
Power supply outlet
Force eject hole
CU-VD40E_EN.book Page 11 Wednesday, June 6, 2007 10:40 AM
12
Saving PC Images to DVD
This burner can be used as a DVD burner by connecting it to a PC. Images edited on a PC can also
be saved to a DVD by using the provided software.
PREPARATIONS:
z Power switch (This burner) : Off
z PC Power : Off
A Turn on the burner and the PC.
z Install the CyberLink Power2Go 5.5 Lite software if
you have not done so.
B Insert a disc.
z We recommend you to use a compatible disc.
(0P25)
C Use Power2Go to save to a DVD.
1. Use Power2Go to create a folder.
z You can create the desired folder names; however
do not use “EVERIO_V” or “EVERIO_S” as the
folder name.
z Use alphanumeric characters when entering the
folder or file names. You can enter up to 40
characters.
2. Set the file system of the data tab in the Power2Go
setup menu to “UDF1.5”.
3. Copy files such as MPEG, JPEG and TPD into the
folder.
z For details on how to save, refer to the Power2Go
User’s guide, Help and ReadMe.
You can view User’s guide, Help and ReadMe from
the start menu of the PC.
z This burner cannot be used to write files into CD-R or
CD-RW. Also, it does not respond to all the functions
of Power2Go 5.5 Lite.
z To get customer support and to register the software,
you need the following product key (CD-Key):
PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS
z Power2Go 5.5 Lite does not support conversion of
audio files to MP3 format.
z When the “Enter Activation Key” screen appears
while using Power2Go 5.5 Lite, close the screen
without entering the activation key.
............................................................................
.
Removing USB Cable from PC
a Carry out removing of hardware on the PC.
b Remove the USB Cable.
CyberLink Power2Go 5.5 Lite can be used on
computers satisfying the following conditions.
Operating system:
Windows XP Home Edition [XP] (pre-installed)
Windows XP Home Professional [XP] (pre-installed)
Connector:
USB 2.0/1.1 connector
z If you use USB1.1 cable, it will take approximately 3
hours to write one DVD.
CPU:
Intel Pentium III, at least 800 MHz
(Intel Pentium 4, at least 2 GHz recommended)
RAM:
At least 128 MB (at least 256 MB recommended)
Free hard disk space:
At least 50 MB for installation
At least 5 GB recommended for making DVDs
Display:
Must be capable of displaying 800 c 600 dots
To Connect
Saving to a DVD
DC
AUDI O
COMPONENT VIDEO OUT
R
P
R PB Y
LVIDEO
AC adapter
(provided for the burner)
USB
DC
Power supply outlet
Power cord
(provided)
PC
USB cable
(provided for the Everio
camera)
USB
Computers That Can Be Used
CU-VD40E_EN.book Page 12 Wednesday, June 6, 2007 10:40 AM
13
CAUTION:
z Do not play the provided CD-ROM in an audio player. It is
not an audio CD. Playing this CD-ROM in an audio player
will result in a loud high noise. It may also damage the
circuit and speaker.
A Insert the provided CD-ROM in the
PC.
z The “Choose Setup Language” screen appears.
B Confirm the language and then click
“OK”.
C Click “Next”.
D Confirm the contents and then click
“Yes”.
E Enter the “User Name” and
“Company Name” and then click
“Next”.
F Follow the on-screen instructions.
z Installation starts. The “InstallShield Wizard
Complete” screen appears.
G Click “Finish”.
H Click “Finish”.
I Read the contents of the Readme.
For information on CyberLink Power2Go 5.5 Lite or other products, use the following contact information.
Telephone/fax support
Support web/e-mail
Installing CyberLink Power2Go 5.5
Lite
z The following screen
appears.
z The “License
Agreement” screen
appears.
z The “Customer
Information” screen
appears.
z The computer will
restart and installation
is completed.
z If the screen on the
right does not appear,
proceed to step H.
z The “CyberLink
Power2Go 5.5”
Readme screen
appears.
CyberLink Power2Go 5.5 Lite Contact Information
Location Language Office hours (Mon. to Fri.) Phone # Fax #
Germany
English / German / French /
Spanish / Italian / Dutch
9:00 am to 5:00 pm +49-700-462-92375 +49-241-70525-25
Language URL/e-mail address
English http://www.cyberlink.com/english/cs/support/new_site/support_index.html
German / French / Spanish / Italian goCyberlink@aixtema.de
CU-VD40E_EN.book Page 13 Wednesday, June 6, 2007 10:40 AM
14
Folder Configuration
This shows the folder configuration when files are saved from a high definition Everio camera or a PC
to DVD.
.................................................................................................................................................................
.
When video/still image files are saved from high definition Everio camera
*1 Video and image files taken by high definition Everio camera that are saved to this burner will be saved in the “EVERIO_V”
and “EVERIO_S” folders.
.................................................................................................................................................................
.
When desired folders/files are created and saved on a PC
*2 Only high definition Everio video files (“.TPD” files)
edited on the PC can be saved in the “EXTMOV” folder.
z “.TPD” files can also be saved in folders created on the
PC.
*3 Create folders with Power2Go and saved the desired
video and/or still image files into the folders. You can use
your preferred folder names and file names. (Shown as
“USER DAT” in the illustration.)
*4 Use Power2Go to save the “EXTMOV” and “USER DAT”
folders to DVD. (0P12)
*5 Files with the extension “.TPD” are high definition Everio
video files that are edited on the PC.
Files with the extension “.MPG” are Everio video files
that are edited on the PC. (For details, refer to “Data
format (extension)” (0P25).)
CAUTION:
z You can create the desired folder and file names, however
do not use “EVERIO_V” or “EVERIO_S” as the folder
name. In addition, use alphanumeric characters when
entering the folder or file names. You can enter up to 40
characters.
z Folders can only be created up to 16 levels. Playback may
be impossible if folders exceed 16 levels.
[BACKUP]
[DATE]
[EVENT]
[FILES]
[PLAYLIST]
[06060101]
[06123199]
[06060101]
[PRG001]
[06060101]
[06060101]
[06060101]
[EVERIO_V]
*1
[BACKUP]
[06060101] [PIC_0001.JPG]
[PIC_0002.JPG]
[EVERIO_S]
*1
[DATE]
[06060101]
[FILES]
[06060101]
[PRG002]
\
Root
EVERIO VIDEO
EVERIO IMAGE
NORMAL BACK-UP
(Everio : ALL SCENES)
Back-up date folders Video folders
Back-up date folders Still image files
EVENT BACK-UP
(Everio : SELECT FROM EVENT)
DATE BACK-UP
(Everio : SELECT FROM DATE)
FILE BACK-UP
(Everio : SELECT FROM SCENES)
NORMAL BACK-UP
DATE BACK-UP
FILE BACK-UP
PLAYLIST BACK-UP
(Everio : SELECT FROM PLAYLIST)
\
[MOV_0001.TPD]
*5
[EXTMOV]
*2, 4
[MOV_0002.TPD]
[USER2.MPG]
*5
[USER1.MPG]
[USER3.JPG]
[USER_DAT]
*3, 4
[USER_DAT2]
[USER_DAT3]
Video/Still image files
EVERIO VIDEO
Root
Video files to be edited
CU-VD40E_EN.book Page 14 Wednesday, June 6, 2007 10:40 AM
18
A Insert a disc.
B Play the video.
z The video plays back or a menu screen appears.
C When the menu screen appears,
select a menu item.
CAUTION:
z Check the resolution setting if the image is not displayed.
(0P19)
NOTE:
z A music CD cannot be played when a TV is connected.
............................................................................
.
Displaying menu screen during playback
............................................................................
.
Exiting menu screen
.................................................................................................................................................................
.
Buttons that can be used during playback
Viewing DVD Videos Saved from Everio Camera
To playback the image immediately after saving in
DVD
1. Remove the USB cable. (0 P12)
2. Turn off the power of this burner.
3. Connect to TV and power on this burner.
z Confirm that the power lamp on the burner is lighted
in orange.
For details on connections, refer to “Connecting to TV”
(0P9, 10).
1. SELECT
2. CONFIRM
or
Button names During DVD video playback
PLAY Pressing the button during pause or variable speed playback will play the video.
PAU SE Pauses the playback.
STOP Stops playback.
REV
Pressing the button each time changes the search from Search b1 to Search b5.
z Pressing the [FWD] button changes the search to Search a1.
z Slow reverse cannot be performed.
FWD
Pressing the button each time changes the search from Search a1 to Search a5.
z Pressing the [REV] button changes the search to Search b1.
Pressing the button each time during pause will play the video in 4 different speeds of 1/16x,
1/8x, 1/4x and 1/2x.
NEXT Moves to the next chapter.
PREVIOUS Moves to the previous chapter.
Skip
Moves the playback position forward for approx. 30 seconds. Pressing this button continuously
will move the position ahead for the number of times the button is pressed.
Replay
Moves the playback position backward for approx. 7 seconds. Pressing this button continuously
will move the position backward for the number of times the button is pressed.
TOOL
Changes the playback settings. (During playback)
AUDIO LANGUAGE : Not available.
SUBTITLE LANGUAGE : Select whether to display the date and time of recording on the bottom
right of the screen. (This setting may not be available depending on the Everio camera used.)
CHANGE ANGLE : Not available.
CHANGE TITLE : Select the title and jump to that title.
CHANGE CHAPTER : Select the chapter and jump to that chapter.
CU-VD40E_EN.book Page 18 Wednesday, June 6, 2007 10:40 AM
19
Viewing High Quality Images
You can change the video output resolution when the burner is connected to a progressive scan TV
via an HDMI cable or component video cable.
A Change output resolution during
stop mode.
z Every press of the button changes the resolution as
follows.
Connection via HDMI cable. (However, the
selections for resolution not supported by TV may
not be displayed.)
Connection via component video cable. (HDMI
cable is not connected.)
Connection via video cable.
Set the resolution to “576i”. Image cannot be
displayed if other settings are being selected. Press
the [RESOLUTION] button and set to “576i”.
B Select “YES”.
z If the image is not displayed on the TV after changing
the resolution, do not operate the burner for 15
seconds. The resolution setting before the change is
restored.
NOTES:
z When HDMI cable is connected, images are not output in
analogue.
z When “576i” is selected, images are output from both the
VIDEO connector and the COMPONENT VIDEO OUT
connectors.
CAUTION:
z “AUTO” will be selected automatically when the burner is
connected via an HDMI cable to a TV not supporting the
selected resolution.
z When the burner is connected to a TV via a component
video cable and the output resolution is set to “1080i” or
“720p”, playback will stop if a digital copy protected (CSS)
disc is played. (0P24)
AUTO
576p
720p
1080/50i
1080/60i
576i
576p
720p
1080/50i
1080/60i
YES
CURRENT RESOLUTION : 576i
DO YOU WANT TO SAVE THE SETTINGS?
NO
1. SELECT
2. CONFIRM
CU-VD40E_EN.book Page 19 Wednesday, June 6, 2007 10:40 AM
20
Changing the Settings
Configures basic settings that determines the operation of the burner.
<Example>
To change the “SELECT TV TYPE” of “VIDEOS” from
“16:9” to “4:3LB”.
When connected to TV and power is on
A Display the “SETTINGS” screen.
B Select “VIDEOS”.
C Select “SELECT TV TYPE”.
D Select “4:3LB”.
E Select “SAVE”.
F Select “YES”.
G Exit the “SETTINGS” screen.
Menu Operation Procedures
SELECT
SETTINGS
1/4
SET CANCEL
SET UP
VIDEOS
DVD
GENERAL
RESET
1. SELECT
2. CONFIRM
SETTINGS
VIDEOS
SAVE CANCEL
16:9
AUTO
OFF
HDMI COLOR SETTING
HDMI ENHANCE SETTING
SELECT TV TYPE
SELECT
SET CANCEL
RETURN
1. SELECT
2. CONFIRM
4:3 LB
SETTINGS
VIDEOS
SAVE CANCEL
AUTO
OFF
HDMI COLOR SETTING
HDMI ENHANCE SETTING
SELECT TV TYPE
SELECT
SET CANCEL
RETURN
1. SELECT
2. CONFIRM
SETTINGS
VIDEOS
SAVE CANCEL
AUTO
OFF
HDMI COLOR SETTING
HDMI ENHANCE SETTING
SELECT TV TYPE
SELECT
SET CANCEL
RETURN
4:3 LB
1. SELECT
2. CONFIRM
SETTINGS
VIDEOS
SAVE CANCEL
AUTO
OFF
HDMI COLOR SETTING
HDMI ENHANCE SETTING
SELECT TV TYPE
SELECT
SET CANCEL
RETURN
4:3 LB
YES
DO YOU WANT TO SAVE THE SETTINGS?
NO
1. SELECT
2. CONFIRM
CU-VD40E_EN.book Page 20 Wednesday, June 6, 2007 10:40 AM
21
is the default setting.
VIDEOS
DVD
The following items will not take effect even if configured.
GENERAL
RESET
Returns the settings to default.
Setting Items And Contents
SELECT TV TYPE
Configure the settings according to the TV to be connected. (If the screen size setting of the TV is fixed, the screen size
setting of the TV remains the same even if you change the setting on this burner.)
16:9 When connected to a wide TV (16:9).
4:3LB
When connected to a 4:3 TV (16:9 images will appear with black bands on the
top and bottom).
4:3PS
When connected to a 4:3 TV (16:9 images will appear with the left and right
sides missing).
HDMI COLOR SETTING
Sets the video format from the COMPONENT VIDEO OUT of the burner.
AUTO Normally selects this.
RGB When images do not appear properly due to the specifications of the TV.
HDMI ENHANCE SETTING
Do not configure this setting.
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
LANGUAGE
Sets the language to be displayed on the screen such as the “SETTINGS” screen.
Set the language.
(“ENGLISH” is set as the default language.)
DATE DISPLAY STYLE
Changes the date format.
year.month.day
Set the date format.
month.day.year
day.month.year
CU-VD40E_EN.book Page 21 Wednesday, June 6, 2007 10:40 AM
24
Error Messages
No images on the TV.
z Is the video input displayed? Change to external output for the burner
connected to a TV with video/audio input connectors.
z When the image is not displayed on the TV after pressing the
[RESOLUTION] button, do not operate the burner for 15 seconds.
The resolution setting before the change is restored. (0P19)
z Check the resolution setting again. (0P19)
Images are distorted during forward search or
reverse search.
z Images may be distorted for sections where the playback speed
changes. This is not a malfunction.
Commercial DVDs cannot be played when the
burner is connected to PC.
z Play the disc of which the region number of the DVD video is “ALL”
or “2”.
Images added by PC cannot be played.
z Images added to the disc (multi-border disc) by PC cannot be played
on this burner.
It takes some time to display the images during
still image playback.
z The file size is too large or there are too many files. This is not a
malfunction.
When changing from special playback to normal
playback, or during slow playback, mosaic
pattern (block noise) appears.
z This is not a malfunction.
Tr o ub le Cause/Action
Tr o ub le Cause/Action
UNREADABLE DISC
z A blank disc is inserted.
z Insert a disc that can be played on the burner. (0P25)
DISC ERROR
z The disc may be dirty. Clean the disc and try again.
z The disc was not finalised after saving from a high definition Everio
camera. Make sure to finalise the disc after saving. (For details, refer
to the instruction manual of the Everio camera.)
CANNOT OPERATE NOW
z Stop the playback and operate again.
HDCP INCOMPATIBLE, CANNOT DISPLAY
USE HDCP COMPATIBLE MONITOR
z Connect the burner to a HDCP compliant monitor.
DETECTED COPY GUARD
CANNOT DISPLAY WITH 1080i/720p
SET TO 576i OR 576p
z Make analogue connection and set resolution to “576i” or “576p”.
(0P19)
INCOMPATIBLE DATA
z The data format is not compatible. Confirm the data format. (0P25)
z The disc was not finalised after saving from a high definition Everio
camera. Make sure to finalise the disc after saving. (For details, refer
to the instruction manual of the Everio camera.)
CANNOT PLAY BACK
z File data may be missing.
CU-VD40E_EN.book Page 24 Wednesday, June 6, 2007 10:40 AM
25
Specifications
............................................................................
.
General
Power Supply
DC12 V
Rated current
1.7 A
Dimensions (W c H c D)
171 c 56 c 262 mm
Weight of main unit
Approx. 1.4 kg
(excluding AC adapter and connection cables)
Operating Environment
Operating temperature : 0 % to 40 %
Operating humidity : 35 % to 80 %
Storage temperature : b20 % to 60 %
Laser Power
For DVD
Wavelength : 653 to 663 nm
Output : 1.0 mW
For CD
Wavelength : 770 to 810 nm
Output : 0.4 mW
............................................................................
.
AC adapter (AP-V400U)
Power Supply
AC110 V to 240 V t, 50 Hz/60 Hz
Input capacity
1.5 A
Output
DC12 V s, 4 A
Operating temperature
0 % to 40 %
Dimensions (W c H c D)
52 c 31 c 120 mm
(excluding power cord)
Weight
Approx. 250 g
............................................................................
.
Remote control (RM-V41U)
Ty pe
DC 3 V (CR2025 button battery)
Battery life
Approx. 1 year (depending on the frequency of use)
Operating distance
Approx. 5 m (face up)
Operating temperature
0 % to 40 %
Dimensions (W c H c D)
42 c 12 c 100 mm
Weight
Approx. 32 g
(including button battery)
............................................................................
.
Recommended discs
DVD-R
JVC, TDK, Verbatim, SONY
DVD-R DL
*1
JVC, Verbatim
DVD-RW
JVC
z Optimal performance of the burner may not be possible
depending on the disc used. Using discs of manufacturers
for which compatibility has been confirmed is
recommended.
z Only 12 cm discs can be used with this burner.
*1 DVD-R DL discs can be used when the burner is
connected to a high definition Everio camera or a PC.
CAUTION:
z When a DVD-R disc is finalised, additional recordings to
the disc are not possible. In addition, the disc cannot be
formatted (initialised).
z After finalising a DVD-RW disc, additional recordings to
the disc are possible by formatting (initialising) the disc.
However, data (video/audio) saved will be deleted.
............................................................................
.
Playback
Compatible discs
DVD-R, DVD-R DL, DVD-RW
Data format (extension)
z DVD data discs that are created using high definition
Everio camera
z DVD data discs that are created using Everio camera
z DVD data discs that are written with data taken by high
definition Everio camera and edited using the provided
editing software.
(When a disc stops during playback and block noise
occurs, disable the SVRT function in the editing
software.)
z Following are the file extensions recognised by this
burner. (It is not guaranteed that the following file
extensions can be played back.)
z When connected to an Everio camera: TOD, JPG
z When connected to a PC: MOD, TPD, JPG
z Others:
MPG, MPEG, MPE, M2P, M2T, M2TS, TS, JPEG, JPE
When playing files created on a PC, pressing the [I]
button after searching may cause the playback
position to deviate.
Video output
1.0 V 75 & (Pin jack)
Audio output
2.0Vrms 1k& (Pin jack)
CU-VD40E_EN.book Page 25 Wednesday, June 6, 2007 10:40 AM
26
Component video output
Y p-p : 1.0 V 75 & (Pin jack)
C
B/CR, PB/PR p-p : 0.7 V 75 & (Pin jack)
HDMI output
19-pin HDCP compliant
Video : 576p / 1080i / 720p
Audio : 2CH PCM/Bit stream
CAUTION:
z Discs other than those stated above, and commercially
available DVD videos cannot be played back properly.
............................................................................
.
When connected to an Everio camera
Interface
USB2.0
Interface cable
USB cable (Mini type A b Mini type B)
Compatible discs for writing (8 cm discs cannot be used)
Everio : DVD-R, DVD-RW (6x DVD-RW discs cannot be
used)
High definition Everio : DVD-R, DVD-R DL, DVD-RW
Recording format
Everio : DVD video (video only)
High definition Everio : Data DVD (video, still image)
Recording time
Everio :
Approx. 30 minutes (including time taken for
finalisation)
z Approx. 90 minutes of video recorded in fine mode
on a 4.7 GB disc. (Varies depending on conditions
such as number of titles.)
High definition Everio :
Approx. 35 minutes (including time taken for
finalisation)
z Approx. 40 minutes of video recorded in full HD
mode on a 8.5 GB DVD-R DL disc. (Varies depending
on conditions such as number of titles.)
z GZ-MC100, GZ-MC200, GZ-MC500, GZ-MG21,
GZ-MG40, GZ-MG50, GZ-MG70 cannot be used.
............................................................................
.
When connected to a PC
Interface
USB2.0, USB1.1
*1
Interface cable
USB cable (USB cable provided for the Everio camera
can also be used.)
Supported operating systems
Windows XP Home Edition, Windows XP Professional
(Macintosh is not supported.)
Data buffer capacity
2 MB
Data transfer rate (for USB2.0)
Writing
DVD-R : Maximum 8x
DVD-R DL : Maximum 4x
DVD-RW : Maximum 4x
Reading
DVD-R : Maximum 12x
DVD-RW : Maximum 12x
DVD-ROM : Maximum 5x
DVD-R DL : Maximum 8x
CD-R : Maximum 10x
*2
CD-RW : Maximum 10x
*2
CD-ROM : Maximum 10x
*3
Compatible discs (8 cm discs cannot be used)
Writing :
DVD-R, DVD-R DL, DVD-RW
Reading :
DVD-R, DVD-R DL, DVD-RW, DVD-ROM, DVD video,
CD-ROM, CD-DA
*4
, CD Extra, Video CD, Mixed CD,
CD-R, CD-RW
Supported software
CyberLink PowerCinema NE for Everio/
PowerProducer 3 NE (Provided for Everio camera)
CyberLink Power2Go 5.5 Lite (provided)
*1 If you use USB1.1 cable, it will take approximately 3
hours to write one DVD.
*2 Any CD recorded using the packet-write method cannot
be played.
*3 Operation is not guaranteed for any CD not compliant
with the CD-DA standard (copy control CD).
*4 It may not be possible to read the audio files depending
on the music CDs (CD-DA). In this case, make use of
applications such as Windows Media Player.
CU-VD40E_EN.book Page 26 Wednesday, June 6, 2007 10:40 AM
27
Memo
CU-VD40E_EN.book Page 27 Wednesday, June 6, 2007 10:40 AM
© 2007 Victor Company of Japan, Limited
Printed in China
0607MNH-SW-BJ
CU-VD40E_EN.book Page 28 Wednesday, June 6, 2007 10:40 AM
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JVC CU-VD40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JVC CU-VD40 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van JVC CU-VD40

JVC CU-VD40 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano, Espanôl - 132 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info