GLID 121
Press the UP and DN keys
simultaneously to enter/exit
the Function Mode
Press the DN and Select keys
simultaneously to access the
Function Mode List Display
To Butterfly Mixing
function
To Flap to Aileron
Mixing function
The purpose of this mixing is to allow the spoiler stick (throttle
stick) to activate the main wing’s trailing edge and activate
brake operation for the glider. To avoid pitching up when flaps
are deployed, elevator mixing is employed. Two different
landing settings are available.
Note that this mixing is also called Spoileron or Crow.
In Function Mode, use the UP and DN keys to select Butterfly
Mixing and access by pressing the UP and DN keys
simultaneously.
Setting Mixing Value
The mixing values can be set to two different settings by utilizing
the butterfly switch. To reverse the operating direction, press the
- key to increase the minus value.
Setting Spoiler Offset
To access spoiler to flap mixing, press the CH key until Spoiler
Offset Setting Function is displayed. Place the spoiler stick in the
low position and memorize the offset position by pressing the
Clear key. Note that spoiler trim operation affects this mixing.
4.11 Butterfly Mixing (Crow) (Function Mode)
4.10 Aileron to Rudder Mixing (Function Mode), cont.
At rate, press to
increase/decrease
Mixing Value (± 125%)
At switch, press to
change switch
selection
Press to return the
Mixing Value to zero or
to return the active
Mixing Switch ON
Indicates the
function being
selected:
↓
Rate
↓
SW
SW OFF appears when the Flap Mixing
is in the middle or lower position
Aileron to Rudder Mixing Value (± 125%)
Indicates current Mixing Switch acitvated
Function Selection
→
Rates
→
Switch
5ch
(AIL2)
2ch
(AIL1)
